The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
A Sustainable Solid Electrolyte Interphase for High‐Energy‐Density Lithium Metal Batteries Under Practical Conditions
Abstract
High‐energy‐density Li metal batteries suffer from a short lifespan under practical conditions, such as limited lithium, high loading cathode, and lean electrolytes, owing to the absence of appropriate solid electrolyte interphase (SEI). Herein, a sustainable SEI was designed rationally by combining fluorinated co‐solvents with sustained‐release additives for practical challenges. The intrinsic uniformity of SEI and the constant supplements of building blocks of SEI jointly afford to sustainable SEI. Specific spatial distributions and abundant heterogeneous grain boundaries of LiF, LiNxOy, and Li 2 O effectively regulate uniformity of Li deposition. In a Li metal battery with an ultrathin Li anode (33 μm), a high‐loading LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode (4.4 mAh cm−2), and lean electrolytes (6.1 g Ah−1), 83 % of initial capacity retains after 150 cycles. A pouch cell (3.5 Ah) demonstrated a specific energy of 340 Wh kg−1 for 60 cycles with lean electrolytes (2.3 g Ah−1).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Self-citationElectrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
“Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries
Suo, L., Borodin, O., Gao, T., Olguin, M., Ho, J., Fan, X., Luo, C., Wang, C., & Xu, K. (2015) · Science · doi:10.1126/science.aab1595 · Cited by 3,821
Pathways for practical high-energy long-cycling lithium metal batteries
Liu, J., Bao, Z., Cui, Y., Dufek, E. J., Goodenough, J. B., Khalifah, P., Li, Q., Liaw, B. Y., Liu, P., Manthiram, A., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0338-x · Cited by 3,412
A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries
Verma, P., Maire, P., & Novák, P. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.05.072 · Cited by 2,903
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
A review on electrolyte additives for lithium-ion batteries
Zhang, S. S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.07.074 · Cited by 1,831
Design principles for electrolytes and interfaces for stable lithium-metal batteries
Tikekar, M. D., Choudhury, S., Tu, Z., & Archer, L. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.114 · Cited by 1,765
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Self-citationAurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Yang, C.-P., Yin, Y.-X., Zhang, S.-F., Li, N.-W., & Guo, Y.-G. (2015) · Nature Communications · doi:10.1038/ncomms9058 · Cited by 1,589
Atomic structure of sensitive battery materials and interfaces revealed by cryo–electron microscopy
Li, Y., Li, Y., Pei, A., Yan, K., Sun, Y., Wu, C.-L., Joubert, L.-M., Chin, R., Koh, A. L., Yu, Y., et al. (2017) · Science · doi:10.1126/science.aam6014 · Cited by 1,547
Commercialization of Lithium Battery Technologies for Electric Vehicles
Zeng, X., Li, M., Abd El‐Hady, D., Alshitari, W., Al‐Bogami, A. S., Lu, J., & Amine, K. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900161 · Cited by 1,542
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries
Fan, X., Chen, L., Borodin, O., Ji, X., Chen, J., Hou, S., Deng, T., Zheng, J., Yang, C., Liou, S.-C., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0183-2 · Cited by 1,371
High‐Voltage Lithium‐Metal Batteries Enabled by Localized High‐Concentration Electrolytes
Chen, S., Zheng, J., Mei, D., Han, K. S., Engelhard, M. H., Zhao, W., Xu, W., Liu, J., & Zhang, J. (2018) · Advanced Materials · doi:10.1002/adma.201706102 · Cited by 1,328
Superconcentrated electrolytes for a high-voltage lithium-ion battery
Wang, J., Yamada, Y., Sodeyama, K., Chiang, C. H., Tateyama, Y., & Yamada, A. (2016) · Nature Communications · doi:10.1038/ncomms12032 · Cited by 1,059
Role of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
Zhang, X., Chen, X., Cheng, X., Li, B., Shen, X., Yan, C., Huang, J., & Zhang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201801513 · Cited by 838
Self-citationHigh-energy lithium metal pouch cells with limited anode swelling and long stable cycles
Niu, C., Lee, H., Chen, S., Li, Q., Du, J., Xu, W., Zhang, J.-G., Whittingham, M. S., Xiao, J., & Liu, J. (2019) · Nature Energy · doi:10.1038/s41560-019-0390-6 · Cited by 732
A Flexible Solid Electrolyte Interphase Layer for Long‐Life Lithium Metal Anodes
Li, N., Shi, Y., Yin, Y., Zeng, X., Li, J., Li, C., Wan, L., Wen, R., & Guo, Y. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201710806 · Cited by 721
Design of electrolyte solutions for Li and Li-ion batteries: a review
Aurbach, D., Talyosef, Y., Markovsky, B., Markevich, E., Zinigrad, E., Asraf, L., Gnanaraj, J. S., & Kim, H.-J. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.01.090 · Cited by 682
Fluorine-donating electrolytes enable highly reversible 5-V-class Li metal batteries
Suo, L., Xue, W., Gobet, M., Greenbaum, S. G., Wang, C., Chen, Y., Yang, W., Li, Y., & Li, J. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1712895115 · Cited by 679
Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode
Yang, C., Yao, Y., He, S., Xie, H., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201702714 · Cited by 661
Yan, C., Yao, Y., Chen, X., Cheng, X., Zhang, X., Huang, J., & Zhang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201807034 · Cited by 635
Self-citationBridging the academic and industrial metrics for next-generation practical batteries
Cao, Y., Li, M., Lu, J., Liu, J., & Amine, K. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0371-8 · Cited by 612
Liu, Y., Lin, D., Li, Y., Chen, G., Pei, A., Nix, O., Li, Y., & Cui, Y. (2018) · Nature Communications · doi:10.1038/s41467-018-06077-5 · Cited by 570
Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries
Chen, S., Niu, C., Lee, H., Li, Q., Yu, L., Xu, W., Zhang, J.-G., Dufek, E. J., Whittingham, M. S., Meng, S., et al. (2019) · Joule · doi:10.1016/j.joule.2019.02.004 · Cited by 531
Zheng, J., Lochala, J. A., Kwok, A., Deng, Z. D., & Xiao, J. (2017) · Advanced Science · doi:10.1002/advs.201700032 · Cited by 524
Artificial Protection Film on Lithium Metal Anode toward Long‐Cycle‐Life Lithium–Oxygen Batteries
Liu, Q., Xu, J., Yuan, S., Chang, Z., Xu, D., Yin, Y., Li, L., Zhong, H., Jiang, Y., Yan, J., et al. (2015) · Advanced Materials · doi:10.1002/adma.201501490 · Cited by 482
Self-citationLi, Y., Huang, W., Li, Y., Pei, A., Boyle, D. T., & Cui, Y. (2018) · Joule · doi:10.1016/j.joule.2018.08.004 · Cited by 459
Markevich, E., Salitra, G., Chesneau, F., Schmidt, M., & Aurbach, D. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00300 · Cited by 453
Langmuir–Blodgett artificial solid-electrolyte interphases for practical lithium metal batteries
Kim, M. S., Ryu, J.-H., Deepika, Lim, Y. R., Nah, I. W., Lee, K.-R., Archer, L. A., & Il Cho, W. (2018) · Nature Energy · doi:10.1038/s41560-018-0237-6 · Cited by 417
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.07.118 · Cited by 371
Lithium Diffusion Mechanism through Solid–Electrolyte Interphase in Rechargeable Lithium Batteries
Ramasubramanian, A., Yurkiv, V., Foroozan, T., Ragone, M., Shahbazian-Yassar, R., & Mashayek, F. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b00436 · Cited by 340
Dendrite-free Li deposition using trace-amounts of water as an electrolyte additive
Qian, J., Xu, W., Bhattacharya, P., Engelhard, M., Henderson, W. A., Zhang, Y., & Zhang, J.-G. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.009 · Cited by 339
Aligning academia and industry for unified battery performance metrics
Lin, Z., Liu, T., Ai, X., & Liang, C. (2018) · Nature Communications · doi:10.1038/s41467-018-07599-8 · Cited by 325
An In Vivo Formed Solid Electrolyte Surface Layer Enables Stable Plating of Li Metal
Pang, Q., Liang, X., Shyamsunder, A., & Nazar, L. F. (2017) · Joule · doi:10.1016/j.joule.2017.11.009 · Cited by 315
Li, G., Gao, Y., He, X., Huang, Q., Chen, S., Kim, S. H., & Wang, D. (2017) · Nature Communications · doi:10.1038/s41467-017-00974-x · Cited by 314
Origin of lithium whisker formation and growth under stress
He, Y., Ren, X., Xu, Y., Engelhard, M. H., Li, X., Xiao, J., Liu, J., Zhang, J.-G., Xu, W., & Wang, C. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0558-z · Cited by 302
Advances in Interfaces between Li Metal Anode and Electrolyte
Zhang, X., Cheng, X., & Zhang, Q. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701097 · Cited by 287
Self-citationStrong texturing of lithium metal in batteries
Shi, F., Pei, A., Vailionis, A., Xie, J., Liu, B., Zhao, J., Gong, Y., & Cui, Y. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1708224114 · Cited by 283
Tuning wettability of molten lithium via a chemical strategy for lithium metal anodes
Wang, S.-H., Yue, J., Dong, W., Zuo, T.-T., Li, J.-Y., Liu, X., Zhang, X.-D., Liu, L., Shi, J.-L., Yin, Y.-X., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-12938-4 · Cited by 279
Self-citationNucleation and Early Stage Growth of Li Electrodeposits
Biswal, P., Stalin, S., Kludze, A., Choudhury, S., & Archer, L. A. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b03548 · Cited by 265
Li 2 S 5 -based ternary-salt electrolyte for robust lithium metal anode
Zhao, C.-Z., Cheng, X.-B., Zhang, R., Peng, H.-J., Huang, J.-Q., Ran, R., Huang, Z.-H., Wei, F., & Zhang, Q. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.01.007 · Cited by 260
Self-citationHigh-capacity rechargeable batteries based on deeply cyclable lithium metal anodes
Shi, Q., Zhong, Y., Wu, M., Wang, H., & Wang, H. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1803634115 · Cited by 258
Heine, J., Hilbig, P., Qi, X., Niehoff, P., Winter, M., & Bieker, P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0011507jes · Cited by 246
The critical role of lithium nitrate in the gas evolution of lithium–sulfur batteries
Jozwiuk, A., Berkes, B. B., Weiss, T. M., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00789a · Cited by 245
Xiang, H., Shi, P., Bhattacharya, P., Chen, X., Mei, D., Bowden, M. E., Zheng, J., Zhang, J.-G., & Xu, W. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.017 · Cited by 225
Self-citationLong term stability of Li-S batteries using high concentration lithium nitrate electrolytes
Adams, B. D., Carino, E. V., Connell, J. G., Han, K. S., Cao, R., Chen, J., Zheng, J., Li, Q., Mueller, K. T., Henderson, W. A., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.09.015 · Cited by 202
Betz, J., Brinkmann, J., Nölle, R., Lürenbaum, C., Kolek, M., Stan, M. C., Winter, M., & Placke, T. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900574 · Cited by 185
Zhang, X., Chen, X., Cheng, X., Li, B., Shen, X. P., Yan, C., Huang, J., & Zhang, Q. (2018) · Angewandte Chemie · doi:10.1002/ange.201801513 · Cited by 137
Self-citationYan, C., Yao, Y., Chen, X., Cheng, X., Zhang, X., Huang, J., & Zhang, Q. (2018) · Angewandte Chemie · doi:10.1002/ange.201807034 · Cited by 134
Self-citationA Flexible Solid Electrolyte Interphase Layer for Long‐Life Lithium Metal Anodes
Li, N., Shi, Y., Yin, Y., Zeng, X., Li, J., Li, C., Wan, L., Wen, R., & Guo, Y. (2017) · Angewandte Chemie · doi:10.1002/ange.201710806 · Cited by 117
Park, S.-J., Hwang, J., Yoon, C. S., Jung, H., & Sun, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04592 · Cited by 111
Impacts of lean electrolyte on cycle life for rechargeable Li metal batteries
Nagpure, S. C., Tanim, T. R., Dufek, E. J., Viswanathan, V., Crawford, A., Wood, S. M., Xiao, J., Dickerson, C. C., & Liaw, B. Y. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.10.060 · Cited by 86
Song, J., Yeon, J.-T., Jang, J.-Y., Han, J., Lee, S., & Choi, N. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.101306jes · Cited by 79
Cited by
A Perspective toward Practical Lithium–Sulfur Batteries
Zhao, M., Li, B.-Q., Zhang, X.-Q., Huang, J.-Q., & Zhang, Q. (2020) · ACS Central Science · doi:10.1021/acscentsci.0c00449 · Cited by 858
Self-citationLu, Y., Zhao, C., Yuan, H., Cheng, X., Huang, J., & Zhang, Q. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009925 · Cited by 562
Self-citationReview on Li Deposition in Working Batteries: From Nucleation to Early Growth
Chen, X., Zhao, B., Yan, C., & Zhang, Q. (2021) · Advanced Materials · doi:10.1002/adma.202004128 · Cited by 456
Self-citationLithium‐Metal Batteries: From Fundamental Research to Industrialization
Kim, S., Park, G., Lee, S. J., Seo, S., Ryu, K., Kim, C. H., & Choi, J. W. (2023) · Advanced Materials · doi:10.1002/adma.202206625 · Cited by 416
Advanced Liquid Electrolytes for Rechargeable Li Metal Batteries
Jie, Y., Ren, X., Cao, R., Cai, W., & Jiao, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910777 · Cited by 330
Metadata
- Authors
- Zhang, X., Li, T., Li, B., Zhang, R., Shi, P., Yan, C., Huang, J., & Zhang, Q.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2020-01-03
- Volume
- 59
- Issue
- 8
- Pages
- 3252-3257
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W2990965166
- Cited by
- 313
- References
- 63
- FWCI
- 15.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.