The DOI matches its Crossref record; 172 of the 172 references it cites were found in a registry or an index.
Advances in 3D printing for polymer composites: A review
Open accessAbstract
The potential of three‐dimensional (3D) printing technology in the fabrication of advanced polymer composites is becoming increasingly evident. This review discusses the latest research developments and applications of 3D printing in polymer composites. First, it focuses on the optimization of 3D printing technology, that is, by upgrading the equipment or components or adjusting the printing parameters, to make them more adaptable to the processing characteristics of polymer composites and to improve the comprehensive performance of the products. Second, it focuses on the 3D printable novel consumables for polymer composites, which mainly include the new printing filaments, printing inks, photosensitive resins, and printing powders, introducing the unique properties of the new consumables and different ways to apply them to 3D printing. Finally, the applications of 3D printing technology in the preparation of functional polymer composites (such as thermal conductivity, electromagnetic interference shielding, biomedicine, self‐healing, and environmental responsiveness) are explored, with a focus on the distribution of the functional fillers and the influence of the topological shapes on the properties and functional characteristics of the 3D printed products. The aim of this review is to deepen the understanding of the convergence between 3D printing technology and polymer composites and to anticipate future trends and applications. image
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Wang, S., & Urban, M. W. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0202-4 · Cited by 1,374
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Raman spectroscopy of carbon materials and their composites: Graphene, nanotubes and fibres
Li, Z., Deng, L., Kinloch, I. A., & Young, R. J. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101089 · Cited by 1,117
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
Mostafaei, A., Elliott, A. M., Barnes, J. E., Li, F., Tan, W., Cramer, C. L., Nandwana, P., & Chmielus, M. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100707 · Cited by 1,093
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
3D printing of conducting polymers
Yuk, H., Lu, B., Lin, S., Qu, K., Xu, J., Luo, J., & Zhao, X. (2020) · Nature Communications · doi:10.1038/s41467-020-15316-7 · Cited by 1,001
Advanced Flame‐Retardant Methods for Polymeric Materials
Liu, B., Zhao, H., & Wang, Y. (2022) · Advanced Materials · doi:10.1002/adma.202107905 · Cited by 887
Factors affecting thermal conductivities of the polymers and polymer composites: A review
Guo, Y., Ruan, K., Shi, X., Yang, X., & Gu, J. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108134 · Cited by 865
Self-citationPolymeric Biomaterials for Medical Implants and Devices
Teo, A. J. T., Mishra, A., Park, I., Kim, Y.-J., Park, W.-T., & Yoon, Y.-J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00429 · Cited by 778
Chen, J., Huang, X., Sun, B., & Jiang, P. (2019) · ACS Nano · doi:10.1021/acsnano.8b06290 · Cited by 768
Recent Progress on Polymer Materials for Additive Manufacturing
Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 740
Yang, C., Tian, X., Li, D., Cao, Y., Zhao, F., & Shi, C. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.04.027 · Cited by 662
Multi‐Material 3D and 4D Printing: A Survey
Rafiee, M., Farahani, R. D., & Therriault, D. (2020) · Advanced Science · doi:10.1002/advs.201902307 · Cited by 662
A review of the current progress and application of 3D printed concrete
Zhang, J., Wang, J., Dong, S., Yu, X., & Han, B. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105533 · Cited by 629
Farahani, R. D., Dubé, M., & Therriault, D. (2016) · Advanced Materials · doi:10.1002/adma.201506215 · Cited by 604
Novel Materials for 3D Printing by Photopolymerization
Layani, M., Wang, X., & Magdassi, S. (2018) · Advanced Materials · doi:10.1002/adma.201706344 · Cited by 561
Kruth, J.-P., Deckers, J., Yasa, E., & Wauthlé, R. (2012) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405412437085 · Cited by 532
A self-healing carbon fibre reinforced polymer for aerospace applications
Williams, G., Trask, R., & Bond, I. (2007) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.01.013 · Cited by 518
Yadroitsev, I., Krakhmalev, P., & Yadroitsava, I. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.08.183 · Cited by 515
Fused deposition modelling: Current status, methodology, applications and future prospects
Cano-Vicent, A., Tambuwala, M. M., Hassan, S. S., Barh, D., Aljabali, A. A. A., Birkett, M., Arjunan, A., & Serrano-Aroca, Á. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102378 · Cited by 509
Material properties and fabrication parameters in selective laser sintering process
Gibson, I., & Shi, D. (1997) · Rapid Prototyping Journal · doi:10.1108/13552549710191836 · Cited by 488
A review on the processing accuracy of two-photon polymerization
Zhou, X., Hou, Y., & Lin, J. (2015) · AIP Advances · doi:10.1063/1.4916886 · Cited by 422
Yasa, E., Deckers, J., & Kruth, J. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111156450 · Cited by 371
Nanostructured polymer films with metal-like thermal conductivity
Xu, Y., Kraemer, D., Song, B., Jiang, Z., Zhou, J., Loomis, J., Wang, J., Li, M., Ghasemi, H., Huang, X., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-09697-7 · Cited by 364
Yadroitsev, I., & Smurov, I. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.083 · Cited by 339
Siddique, S. H., Hazell, P. J., Wang, H., Escobedo, J. P., & Ameri, A. A. H. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.103051 · Cited by 339
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Layerless fabrication with continuous liquid interface production
Janusziewicz, R., Tumbleston, J. R., Quintanilla, A. L., Mecham, S. J., & DeSimone, J. M. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1605271113 · Cited by 332
Design and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
Xue, T., Yang, Y., Yu, D., Wali, Q., Wang, Z., Cao, X., Fan, W., & Liu, T. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01017-5 · Cited by 328
3D printing for polymer/particle-based processing: A review
Xu, W., Jambhulkar, S., Zhu, Y., Ravichandran, D., Kakarla, M., Vernon, B., Lott, D. G., Cornella, J. L., Shefi, O., Miquelard-Garnier, G., et al. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109102 · Cited by 318
Direct-Ink-Write 3D Printing of Hydrogels into Biomimetic Soft Robots
Cheng, Y., Chan, K. H., Wang, X.-Q., Ding, T., Li, T., Lu, X., & Ho, G. W. (2019) · ACS Nano · doi:10.1021/acsnano.9b06144 · Cited by 312
Mimosa inspired bilayer hydrogel actuator functioning in multi-environments
Zheng, J., Xiao, P., Le, X., Lu, W., Théato, P., Ma, C., Du, B., Zhang, J., Huang, Y., & Chen, T. (2018) · Journal of Materials Chemistry C · doi:10.1039/c7tc04879c · Cited by 290
Self-Healing Polymers for Electronics and Energy Devices
Zhou, Y., Li, L., Han, Z., Li, Q., He, J., & Wang, Q. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00231 · Cited by 289
Phase change materials for thermal management and energy storage: A review
Lawag, R. A., & Ali, H. M. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105602 · Cited by 279
Voet, V. S. D., Guit, J., & Loos, K. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202000475 · Cited by 271
A review on additive manufacturing of ceramic matrix composites
Sun, J., Ye, D., Zou, J., Chen, X., Wang, Y., Yuan, J., Liang, H., Qu, H., Binner, J., & Bai, J. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.06.039 · Cited by 265
The role of polymer mechanochemistry in responsive materials and additive manufacturing
Ghanem, M. A., Basu, A., Behrou, R., Boechler, N., Boydston, A. J., Craig, S. L., Lin, Y., Lynde, B. E., Nelson, A., Shen, H., et al. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00249-w · Cited by 258
Structure-property relationship of nano enhanced stereolithography resin for desktop SLA 3D printer
Weng, Z., Zhou, Y., Lin, W., Senthil, T., & Wu, L. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.035 · Cited by 254
High cell density and high-resolution 3D bioprinting for fabricating vascularized tissues
You, S., Xiang, Y., Hwang, H. H., Berry, D. B., Kiratitanaporn, W., Guan, J., Yao, E., Tang, M., Zhong, Z., Ma, X., et al. (2023) · Science Advances · doi:10.1126/sciadv.ade7923 · Cited by 246
4D Printing in Biomedical Engineering: Advancements, Challenges, and Future Directions
Ramezani, M., & Mohd Ripin, Z. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14070347 · Cited by 241
Additive Manufacturing of Precision Biomaterials
Guzzi, E. A., & Tibbitt, M. W. (2020) · Advanced Materials · doi:10.1002/adma.201901994 · Cited by 234
Evolution of 3D Printing Methods and Materials for Electrochemical Energy Storage
Egorov, V., Gulzar, U., Zhang, Y., Breen, S., & O'Dwyer, C. (2020) · Advanced Materials · doi:10.1002/adma.202000556 · Cited by 233
Self-citationMalekipour, E., & El-Mounayri, H. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1172-6 · Cited by 230
Jiang, C., Zhang, L., Yang, Q., Huang, S., Shi, H., Long, Q., Qian, B., Liu, Z., Guan, Q., Liu, M., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-24680-x · Cited by 230
A Review of Multi-Material 3D Printing of Functional Materials via Vat Photopolymerization
Shaukat, U., Rossegger, E., & Schlögl, S. (2022) · Polymers · doi:10.3390/polym14122449 · Cited by 226
Mani, M., Lane, B. M., Donmez, M. A., Feng, S. C., & Moylan, S. P. (2017) · International Journal of Production Research · doi:10.1080/00207543.2016.1223378 · Cited by 225
Ma, T.-B., Ma, H., Ruan, K.-P., Shi, X.-T., Qiu, H., Gao, S.-Y., & Gu, J.-W. (2022) · Chinese Journal of Polymer Science · doi:10.1007/s10118-022-2673-9 · Cited by 225
Self-citationLiu, L., Zhu, M., Xu, X., Li, X., Ma, Z., Jiang, Z., Pich, A., Wang, H., & Song, P. (2021) · Advanced Materials · doi:10.1002/adma.202105829 · Cited by 203
Zhu, Z., Park, H. S., & McAlpine, M. C. (2020) · Science Advances · doi:10.1126/sciadv.aba5575 · Cited by 200
Nguyen, N. A., Barnes, S. H., Bowland, C. C., Meek, K. M., Littrell, K. C., Keum, J. K., & Naskar, A. K. (2018) · Science Advances · doi:10.1126/sciadv.aat4967 · Cited by 196
Liu, J., Li, W., Guo, Y., Zhang, H., & Zhang, Z. (2019) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.02.026 · Cited by 196
Self-citationMaterial jetting for advanced applications: A state-of-the-art review, gaps and future directions
Elkaseer, A., Chen, K. J., Janhsen, J. C., Refle, O., Hagenmeyer, V., & Scholz, S. G. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.103270 · Cited by 195
Direct additive manufacturing of metal parts for automotive applications
Zhao, N., Parthasarathy, M., Patil, S., Coates, D., Myers, K. J., Zhu, H., & Li, W. (2023) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2023.04.008 · Cited by 195
Three-dimensional nanoprinting via charged aerosol jets
Jung, W., Jung, Y.-H., Pikhitsa, P. V., Feng, J., Yang, Y., Kim, M., Tsai, H.-Y., Tanaka, T., Shin, J., Kim, K.-Y., et al. (2021) · Nature · doi:10.1038/s41586-021-03353-1 · Cited by 194
Lin, Y., Kang, Q., Wei, H., Bao, H., Jiang, P., Mai, Y.-W., & Huang, X. (2021) · Nano-Micro Letters · doi:10.1007/s40820-021-00702-7 · Cited by 193
Prashantha, K., & Roger, F. (2017) · Journal of Macromolecular Science, Part A · doi:10.1080/10601325.2017.1250311 · Cited by 184
Ultrafast 3D printing with submicrometer features using electrostatic jet deflection
Liashenko, I., Rosell-Llompart, J., & Cabot, A. (2020) · Nature Communications · doi:10.1038/s41467-020-14557-w · Cited by 177
Peng, X., Zhang, M., Guo, Z., Sang, L., & Hou, W. (2020) · Composites Communications · doi:10.1016/j.coco.2020.100478 · Cited by 177
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Fused Deposition Modeling for Unmanned Aerial Vehicles (UAVs): A Review
Klippstein, H., Diaz De Cerio Sanchez, A., Hassanin, H., Zweiri, Y., & Seneviratne, L. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700552 · Cited by 176
Li, M., Shen, X., Chen, X., Gan, J.-M., Wang, F., Li, J., Wang, X., & Shen, Q. (2022) · Nature Communications · doi:10.1038/s41467-022-33596-z · Cited by 175
Dananjaya, V., Marimuthu, S., Yang, R. (., Grace, A. N., & Abeykoon, C. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101282 · Cited by 170
3D Printing in alloy design to improve biocompatibility in metallic implants
Mitra, I., Bose, S., Dernell, W. S., Dasgupta, N., Eckstrand, C., Herrick, J., Yaszemski, M. J., Goodman, S. B., & Bandyopadhyay, A. (2021) · Materials Today · doi:10.1016/j.mattod.2020.11.021 · Cited by 169
3D Printing‐Enabled Nanoparticle Alignment: A Review of Mechanisms and Applications
Xu, W., Jambhulkar, S., Ravichandran, D., Zhu, Y., Kakarla, M., Nian, Q., Azeredo, B., Chen, X., Jin, K., Vernon, B., et al. (2021) · Small · doi:10.1002/smll.202100817 · Cited by 168
Stereolithography (SLA) 3D printing of a bladder device for intravesical drug delivery
Xu, X., Goyanes, Á., Trenfield, S. J., Díaz-Gómez, L. A., Alvarez‐Lorenzo, C., Gaisford, S., & Basit, A. W. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111773 · Cited by 164
Jia, Y., He, H., Geng, Y., Huang, B., & Peng, X. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.03.035 · Cited by 160
Markandan, K., & Lai, C. Q. (2023) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2023.110661 · Cited by 159
Recent advances in 3D printing with protein-based inks
Mu, X., Agostinacchio, F., Xiang, N., Pei, Y., Khan, Y., Guo, C., Cebe, P., Motta, A., & Kaplan, D. L. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101375 · Cited by 147
Yao, Z., Yuan, W., Xu, J., Tong, W., Mi, J., Ho, P., Chow, D. H. K., Li, Y., Yao, H., Li, X., et al. (2022) · Advanced Science · doi:10.1002/advs.202202102 · Cited by 147
3D-printed liquid metal polymer composites as NIR-responsive 4D printing soft robot
Zhang, L., Huang, X., Cole, T., Lu, H., Hang, J., Li, W., Tang, S., Boyer, C. A., Davis, T. P., & Qiao, R. (2023) · Nature Communications · doi:10.1038/s41467-023-43667-4 · Cited by 147
Silva, V. A. O. P., Fernandes‐Junior, W. S., Rocha, D. P., Stefano, J. S., Muñoz, R. A. A., Bonacin, J. A., & Janegitz, B. C. (2020) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2020.112684 · Cited by 146
Mechanical performances of continuous carbon fiber reinforced PLA composites printed in vacuum
Li, H., Liu, B., Ge, L., Chen, Y., Zheng, H., & Fang, D. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109277 · Cited by 146
Bayat, M., Zinovieva, O., Ferrari, F., Ayas, C., Langelaar, M., Spangenberg, J., Salajeghe, R., Poulios, K., Mohanty, S., Sigmund, O., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101129 · Cited by 140
Wang, X., He, Y., Liu, Y., & Leng, J. (2022) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2022.100702 · Cited by 138
Guiney, L. M., Mansukhani, N. D., Jakus, A. E., Wallace, S. G., Shah, R. N., & Hersam, M. C. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b00555 · Cited by 137
Review of High-Performance Sustainable Polymers in Additive Manufacturing
Chyr, G., & DeSimone, J. M. (2023) · Green Chemistry · doi:10.1039/d2gc03474c · Cited by 136
Peterson, A. M. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.03.030 · Cited by 134
4D printing in biomedical applications: emerging trends and technologies
Agarwal, T., Hann, S.-Y., Chiesa, I., Cui, H., Celikkin, N., Micalizzi, S., Barbetta, A., Costantini, M., Esworthy, T. J., Zhang, L. G., et al. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb01335a · Cited by 134
3D Printed Supercapacitor: Techniques, Materials, Designs, and Applications
Li, M., Zhou, S., Cheng, L., Mo, F., Chen, L., Yu, S., & Wei, J. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202208034 · Cited by 133
Liu, J., Liu, B., Min, S., Yin, B., Peng, B., Yu, Z., Wang, C., Ma, X., Wen, P., Tian, Y., et al. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.02.020 · Cited by 132
Designing 3D printable polypropylene: Material and process optimisation through rheology
Bertolino, M., Battegazzore, D., Arrigo, R., & Frache, A. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.101944 · Cited by 127
Gaikwad, A., Williams, R. J., de Winton, H., Bevans, B. D., Smoqi, Z., Rao, P., & Hooper, P. A. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110919 · Cited by 127
Madhu, N. R., Erfani, H., Jadoun, S., Amir, M., Thiagarajan, Y., & Chauhan, N. P. S. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10048-y · Cited by 115
3D printing of PEEK–cHAp scaffold for medical bone implant
Oladapo, B. I., Zahedi, S. A., Ismail, S. O., Omigbodun, F. T., Bowoto, O. K., Olawumi, M. A., & Muhammad, M. A. (2020) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00098-0 · Cited by 114
Priarone, P. C., Catalano, A. R., & Settineri, L. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-023-00395-x · Cited by 113
Mahshid, R., Isfahani, M. N., Heidari‐Rarani, M., & Mirkhalaf, M. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107584 · Cited by 112
Aerosol‐Jet Printed Sensors for Environmental, Safety, and Health Monitoring: A Review
Fisher, C., Skolrood, L. N., Li, K., Joshi, P. C., & Aytuğ, T. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202300030 · Cited by 109
Huang, J., Segura, L. J., Wang, T., Zhao, G., Sun, H., & Zhou, C. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101197 · Cited by 107
A critical review on Classification of materials used in 3D printing process
Ranjan, R., Kumar, D., Kundu, M., & Moi, S. C. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.03.308 · Cited by 106
Continuous 3D printing from one single droplet
Zhang, Y., Dong, Z., Li, C., Du, H., Fang, N. X., Wu, L., & Song, Y. (2020) · Nature Communications · doi:10.1038/s41467-020-18518-1 · Cited by 105
Self-citationSingle-digit-micrometer-resolution continuous liquid interface production
Hsiao, K., Lee, B. J., Samuelsen, T., Lipkowitz, G., Kronenfeld, J. M., Ilyn, D., Shih, A., Dulay, M. T., Tate, L., Shaqfeh, E. S. G., et al. (2022) · Science Advances · doi:10.1126/sciadv.abq2846 · Cited by 105
Intrinsic Self-Healing Chemistry for Next-Generation Flexible Energy Storage Devices
Wan, X., Mu, T., & Yin, G. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01075-9 · Cited by 105
Optimization of Silicone 3D Printing with Hierarchical Machine Learning
Menon, A., Póczos, B., Feinberg, A. W., & Washburn, N. (2019) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2018.0088 · Cited by 103
Wang, Q., Tian, X., Zhang, D., Zhou, Y., Yan, W., & Li, D. (2023) · Nature Communications · doi:10.1038/s41467-023-39566-3 · Cited by 103
Recent Advances on High‐Performance Polyaryletherketone Materials for Additive Manufacturing
Chen, P., Wang, H., Su, J. D., Tian, Y., Wen, S., Su, B., Cao, Y., Chen, B., Zhou, K., Yan, C., et al. (2022) · Advanced Materials · doi:10.1002/adma.202200750 · Cited by 102
Yang, G., Sun, Y., qin, L., Li, M., Ou, K., Jiang, F. M., & Fu, Q. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2021.109013 · Cited by 101
Sun, S., Fei, G., Wang, X., Xie, M., Guo, Q., Fu, D., Wang, Z., Wang, H., Luo, G., & Xia, H. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.128675 · Cited by 99
Multi-Objective Optimization Design through Machine Learning for Drop-on-Demand Bioprinting
Shi, J., Song, J., Song, B., et al. (2019) · Engineering · doi:10.1016/j.eng.2018.12.009 · Cited by 98
Progress in Photocurable 3D Printing of Photosensitive Polyurethane: A Review
Fei, J., Rong, Y., Zhu, L., Li, H., Zhang, X., Lu, Y., An, J., Bao, Q., & Huang, X. (2023) · Macromolecular Rapid Communications · doi:10.1002/marc.202300211 · Cited by 97
Self-foaming polymers: Opportunities for the next generation of personal protective equipment
Monie, F., Vidil, T., Grignard, B., Cramail, H., & Detrembleur, C. (2021) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2021.100628 · Cited by 92
Self-Healing Nanocomposites—Advancements and Aerospace Applications
Kausar, A., Ahmad, I., Mâaza, M., & Bocchetta, P. (2023) · Journal of Composites Science · doi:10.3390/jcs7040148 · Cited by 92
Dong, X., Wan, B., Zheng, M., Huang, L., Feng, Y., Yao, R., Gao, J., Zhao, Q., & Zha, J. (2023) · Advanced Materials · doi:10.1002/adma.202307804 · Cited by 92
Applications of 3D printing in the management of severe spinal conditions
Provaggi, E., Leong, J., & Kalaskar, D. M. (2016) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/0954411916667761 · Cited by 89
3D printing of thermosets with diverse rheological and functional applicabilities
Sun, Y., Wang, L., Ni, Y., Zhang, H., Cui, X., Li, J., Zhu, Y., Liu, J., Zhang, S., Chen, Y., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-35929-y · Cited by 86
Multimaterial Microfluidic 3D Printing of Textured Composites with Liquid Inclusions
Li, X., Zhang, J., Yi, X., Huang, Z., Lv, P., & Duan, H. (2018) · Advanced Science · doi:10.1002/advs.201800730 · Cited by 85
Wu, B. H., Sufi, A., Biswas, R. G., Hisatsune, A., Moxley‐Paquette, V., Ning, P., Soong, R., Dicks, A. P., & Simpson, A. J. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06281 · Cited by 85
Electromagnetic shielding effectiveness of 3D printed polymer composites
Viskadourakis, Z., Vasilopoulos, K. C., Economou, E. N., Soukoulis, C. M., & Kenanakis, G. (2017) · Applied Physics A · doi:10.1007/s00339-017-1353-z · Cited by 80
4D printing: a cutting-edge platform for biomedical applications
Naniz, M. A., Askari, M., Zolfagharian, A., Naniz, M. A., & Bodaghi, M. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac8e42 · Cited by 80
Hasanzadeh, R., Mihankhah, P., Azdast, T., Rasouli, A., Shamkhali, M., & Park, C. B. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.146616 · Cited by 79
In-nozzle impregnation of continuous textile flax fiber/polyamide 6 composite during FFF process
Terekhina, S., Egorov, S., Tarasova, T. V., Skornyakov, I., Guillaumat, L., & Hattali, L. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106725 · Cited by 75
4D printing reversible actuator with strain self-sensing function via structural design
Wang, Y., & Li, X. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108644 · Cited by 74
Parker, M., Inthavong, A., Law, E., Waddell, S., Ezeokeke, N., Matsuzaki, R., & Arola, D. D. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102763 · Cited by 71
Digital light processing (DLP) in tissue engineering: from promise to reality, and perspectives
Gong, J., Qian, Y., Lu, K., Zhu, Z., Siow, L., Zhang, C., Zhou, S., Gu, T., Yin, J., Yu, M., et al. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac96ba · Cited by 71
Polymer 4D printing: Advanced shape‐change and beyond
Imrie, P., & Jin, J. (2021) · Journal of Polymer Science · doi:10.1002/pol.20210718 · Cited by 69
Anomaly detection in laser powder bed fusion using machine learning: A review
Sahar, T., Rauf, M., Murtaza, A., Khan, L. A., Ayub, H., Jameel, S. M., & Ahad, I. U. (2022) · Results in Engineering · doi:10.1016/j.rineng.2022.100803 · Cited by 68
A Brief Review on Additive Manufacturing of Polymeric Composites and Nanocomposites
Monfared, V., Bakhsheshi‐Rad, H. R., Ramakrishna, S., Razzaghi, M., & Berto, F. (2021) · Micromachines · doi:10.3390/mi12060704 · Cited by 67
Sun, X., Zhang, L., & Liao, S. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.12.094 · Cited by 64
Jam, A., du Plessis, A., Lora, C., Raghavendra, S., Pellizzari, M., & Benedetti, M. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102556 · Cited by 62
Rayleigh Instability-Assisted Satellite Droplets Elimination in Inkjet Printing
Yang, Q., Li, H., Li, M., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11356 · Cited by 60
Bragaglia, M., Cecchini, F., Paleari, L., Ferrara, M., Rinaldi, M., & Nanni, F. M. C. (2023) · Composite Structures · doi:10.1016/j.compstruct.2023.117379 · Cited by 59
Bevans, B. D., Barrett, C., Spears, T., Gaikwad, A., Riensche, A., Smoqi, Z., Halliday, H. S., & Rao, P. (2023) · Virtual and Physical Prototyping · doi:10.1080/17452759.2023.2196266 · Cited by 56
Synthesis, Mechanism, and Applications of Self-healing Materials
Jadoun, S. (2023) · Biomedical Materials & Devices · doi:10.1007/s44174-023-00107-7 · Cited by 54
3D-printing of oxidized starch-based hydrogels with superior hydration properties
Qiu, Z., Zheng, B., Xu, J., Chen, J., & Chen, L. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119686 · Cited by 53
Dou, J., Tang, L., Mou, L., Zhang, R., & Jiang, X. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108237 · Cited by 52
Huang, W., Zhang, J., Singh, V., Xu, L., Kabi, P., Bele, E., & Tiwari, M. K. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103343 · Cited by 52
Ultraviolet Photodetectors Based on Polymer Microwire Arrays toward Wearable Medical Devices
Zhang, Z., Geng, Y., Cao, S., Chen, Z., Gao, H., Zhu, X., Zhang, X., & Wu, Y. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c04169 · Cited by 51
Application of RAFT in 3D Printing: Where Are the Future Opportunities?
Bagheri, A. (2023) · Macromolecules · doi:10.1021/acs.macromol.2c02585 · Cited by 51
Zheng, M., Guo, Q., Yin, X., Getangama, N. N., de Bruyn, J. R., Xiao, J., Bai, Y., Liu, M., & Yang, J. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta11341g · Cited by 50
Origami-Based Design for 4D Printing of 3D Support-Free Hollow Structures
Jian, B., Demoly, F., Zhang, Y., Qi, H. J., André, J., & Gomes, S. (2022) · Engineering · doi:10.1016/j.eng.2021.06.028 · Cited by 49
Self-citationJu, Q., Tang, Z., Shi, H., Zhu, Y., Shen, Y., & Wang, T. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.232 · Cited by 49
Stereolithography 3D Printing of Microcapsule Catalyst-Based Self-Healing Composites
Shinde, V. V., Celestine, A. N., Beckingham, L. E., et al. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c00872 · Cited by 48
3D-Printed Ultratough Hydrogel Structures with Titin-like Domains
Zhu, F., Cheng, L., Wang, Z. J., Hong, W., Wu, Z. L., Yin, J., Qian, J. W., & Zheng, Q. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02007 · Cited by 47
Hernandez, J. J., Dobson, A. L., Carberry, B. J., Kuenstler, A. S., Shah, P. K., Anseth, K. S., White, T. J., & Bowman, C. N. (2022) · Macromolecules · doi:10.1021/acs.macromol.1c02459 · Cited by 46
Mechanics-based design strategies for 4D printing: A review
Yuan, C., Lu, T., & Wang, T. J. (2022) · Forces in Mechanics · doi:10.1016/j.finmec.2022.100081 · Cited by 46
3D Printing of Nacre-Inspired Structures with Exceptional Mechanical and Flame-Retardant Properties
Yang, Y., Wang, Z., He, Q., Li, X., Lu, G., Jiang, L., Zeng, Y., Bethers, B., Jin, J., Lin, S., et al. (2022) · Research · doi:10.34133/2022/9840574 · Cited by 45
3D-printed biomimetic bone implant polymeric composite scaffolds
Oladapo, B. I., Zahedi, S. A., Ismail, S. O., Fernando, W., & Ikumapayi, O. M. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-11344-x · Cited by 45
Tahouni, Y., Cheng, T. J., Lajewski, S., Benz, J., Bonten, C., Wood, D. M., & Menges, A. (2022) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2022.0061 · Cited by 44
Optical screw-wrench for microassembly
Köhler, J., Ksouri, S. I., Esen, C., & Ostendorf, A. (2017) · Microsystems & Nanoengineering · doi:10.1038/micronano.2016.83 · Cited by 41
3D Printed Hydrogel Multiassay Platforms for Robust Generation of Engineered Contractile Tissues
Christensen, R. K., Laier, C. V. H., Kızıltay, A., Wilson, S., & Larsen, N. B. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b01274 · Cited by 41
Hupfeld, T., Salamon, S., Landers, J., Sommereyns, A., Doñate‐Buendía, C., Schmidt, J., Wende, H., Schmidt, M., Barcikowski, S., & Gökce, B. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc02740e · Cited by 41
Nagalingam, A. P., Gopasetty, S. K., Wang, J., Yuvaraj, H. K., Gopinath, A., & Yeo, S. H. (2023) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2023.107879 · Cited by 40
Ultra-soft thermal self-healing liquid-metal-foamed composite with high thermal conductivity
Lü, X., Tang, H., Wang, H., Meng, X., & Li, F. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109523 · Cited by 38
Wang, Y., Xu, C., Liu, J., Pan, H., Li, Y., & Mei, D. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103247 · Cited by 38
4D printing of shape-adaptive tactile sensor with tunable sensing characteristics
Ren, L., Wang, Z., Ren, L., Han, Z., Zhou, X. L., Song, Z., & Liu, Q. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.110959 · Cited by 38
Photoinduced 3D Printing through a Combination of Cationic and Radical RAFT Polymerization
Zhao, B., Li, J., Li, Z., Lin, X., Pan, X., Zhang, Z., & Zhu, J. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c00841 · Cited by 36
Zhou, L., Liu, H., Zhang, B., Wei, C., Zhou, S., Huang, X.-Y., Zhong, X., Zhang, L., Bi, W., Liu, J., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202314330 · Cited by 35
A multimaterial 3D printing-assisted micropatterning for heat dissipation applications
Jambhulkar, S., Ravichandran, D., Thippanna, V., Patil, D., & Song, K. (2023) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-023-00672-x · Cited by 34
Polymer materials as catalysts for medical, environmental, and energy applications
Mazur, F., Pham, A.-H., & Chandrawati, R. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.101937 · Cited by 34
Zawaski, C. E., & Williams, C. B. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101111 · Cited by 33
Non-Invasive Three-Dimensional Cell Analysis in Bioinks by Raman Imaging
Marzi, J., Fuhrmann, E., Brauchle, E., Singer, V., Pfannstiel, J., Schmidt, I., & Hartmann, H. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c24463 · Cited by 33
Liu, W., Wu, H., Xu, Y., et al. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.04.153 · Cited by 32
Multi‐Jet Fusion 3D Voxel Printing of Conductive Elastomers
Chen, J., Zhao, L., & Zhou, K. (2022) · Advanced Materials · doi:10.1002/adma.202205909 · Cited by 30
Polymer Membranes with Vertically Oriented Pores Constructed by 2D Freezing at Ambient Temperature
Liang, H., Ji, K.-J., Zha, L., Hu, W., Ou, Y., & Xu, Z. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03071 · Cited by 29
Strengthening of plasma treated 3D printed ABS through epoxy infiltration
Zaldivar, R. J., McLouth, T. D., Patel, D. N., Severino, J. V., & Kim, H. I. (2017) · Progress in Additive Manufacturing · doi:10.1007/s40964-017-0032-0 · Cited by 28
Wilts, E. M., & Long, T. E. (2020) · Polymer International · doi:10.1002/pi.6108 · Cited by 28
High-strength light-weight aramid fibre/polyamide 12 composites printed by Multi Jet Fusion
Chen, J., Tan, P., Liu, X., Tey, W. S., Ong, A. C. Y., Zhao, L., & Zhou, K. (2022) · Virtual and Physical Prototyping · doi:10.1080/17452759.2022.2036931 · Cited by 28
Shinde, V. V., Taylor, G., Celestine, A. N., & Beckingham, B. S. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c01884 · Cited by 26
Hou, Y., Gao, M. X., An, R., Tey, W. S., Li, B., Chen, J., Zhao, L., & Zhou, K. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103195 · Cited by 26
Fang, H., Ju, J., Chen, L., Zhou, M., Guo, Z., Hou, J., Jiang, W., Wang, Z., & Sun, J. (2024) · Advanced Science · doi:10.1002/advs.202308381 · Cited by 24
Sound Continuous Production of Thermosets
Yao, G., Xiang, H., Lucas, M., Gao, H., Zheng, L., Wu, D., Han, Z., Lai, J., & Wang, C. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202312736 · Cited by 22
Zhou, Z., Zhou, X., Yuan, X., Li, B., Song, Y., & Liu, M. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111740 · Cited by 21
Bezek, L. B., & Williams, C. B. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103640 · Cited by 21
Lin, Y., Deng, W., Rui, Y., Liu, Y., Lu, G., & Liu, J. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.52629 · Cited by 18
Additive Manufacturing of Thermoelectric Microdevices for 4D Thermometry
Lee, H., Wang, Z., Rao, Q., Lee, S., Xiao, H., Liu, Y., Yang, J., Chen, M., Ki, D., & Kim, J. T. (2023) · Advanced Materials · doi:10.1002/adma.202301704 · Cited by 17
Development of CO2 curable 3D printing materials
Zhong, K., Liu, Z., & Wang, F. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103442 · Cited by 14
Photocurable Nitric Oxide‐Releasing Copolyester for the 3D Printing of Bioresorbable Vascular Stents
de Oliveira, M. F., da Silva, L. C. E., Catori, D. M., Lorevice, M. V., Galvão, K. E. A., Millás, A. L. G. M., & de Oliveira, M. G. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202200448 · Cited by 12
Kim, H., Kim, J., Ryu, K., Lee, J., Kim, H., Hyun, J., & Koo, J. (2023) · ACS Omega · doi:10.1021/acsomega.3c01165 · Cited by 12
Metadata
- Authors
- Ma, T., Zhang, Y., Ruan, K., Guo, H., He, M., Shi, X., Guo, Y., Kong, J., & Gu, J.
- Venue
- InfoMat
- Publisher
- Wiley
- Published
- 2024-06
- Volume
- 6
- Issue
- 6
- ISSN
- 2567-3165 (ISSN-L)
- OpenAlex
- W4399354366
- Cited by
- 310
- References
- 172
- FWCI
- 33.46
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.