The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Soft and hard tissue response to photocrosslinked poly(propylene fumarate) scaffolds in a rabbit model
Abstract
The treatment of large cranial defects may be greatly improved by the development of precisely formed bone tissue engineering scaffolds. Such scaffolds could be constructed by using UV laser stereolithography to photocrosslink a linear, biodegradable polymer into a three‐dimensional implant. We have previously presented a method to photocrosslink the biodegradable polyester, poly(propylene fumarate) (PPF). To ensure the safety and effectiveness of this technique, the soft and hard tissue response to photocrosslinked PPF scaffolds of different pore morphologies was investigated. Four classes of photocrosslinked PPF scaffolds, constructed with differing porosities (57–75%) and pore sizes (300–500 or 600–800 μm), were implanted both subcutaneously and in 6.3‐mm‐diameter cranial defects in a rabbit model. The rabbits were sacrificed at 2 and 8 weeks, and the implants were analyzed by light microscopy, histological scoring analysis, and histomorphometric analysis. Results showed the PPF scaffolds elicit a mild tissue response in both soft and hard tissues. Inflammatory cells, vascularization, and connective tissue were observed at 2 weeks; a decrease in inflammatory cell density and a more organized connective tissue were observed at 8 weeks. Scaffold porosity and scaffold pore size were not found to significantly affect the observed tissue response. Evidence of scaffold surface degradation was noted both by histology and histomorphometric analysis. Bone ingrowth in PPF scaffolds implanted into cranial defects was <3% of the defect area. The results indicate that photocrosslinked PPF scaffolds are biocompatible in both soft and hard tissues and thus may be an attractive platform for bone tissue engineering. © 2001 Wiley Periodicals, Inc. J Biomed Mater Res 59: 547–556, 2002
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
The Critical Size Defect as an Experimental Model for Craniomandibulofacial Nonunions
SCHMITZ, J. P., & HOLLINGER, J. O. (1986) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-198604000-00036 · Cited by 1,317
Wetting of poly(l-lactic acid) and poly(dl-lactic-co-glycolic acid) foams for tissue culture
Mikos, A. G., Lyman, M. D., Freed, L. E., & Langer, R. (1994) · Biomaterials · doi:10.1016/0142-9612(94)90197-x · Cited by 408
Self-citationEngineering Bone Regeneration with Bioabsorbable Scaffolds with Novel Microarchitecture
Whang, K., Healy, K. E., Elenz, D. R., Nam, E. K., Tsai, D. C., Thomas, C. H., Nuber, G. W., Glorieux, F. H., Travers, R., & Sprague, S. M. (1999) · Tissue Engineering · doi:10.1089/ten.1999.5.35 · Cited by 405
Ishaug-Riley, S. L., Crane, G. M., Gurlek, A., Miller, M. J., Yasko, A. W., Yaszemski, M. J., & Mikos, A. G. (1997) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199707)36:1<1::aid-jbm1>3.0.co;2-p · Cited by 257
Self-citationvan der Lubbe, H. B. M., Klein, C. P. A. T., & de Groot, K. (1988) · Stain Technology · doi:10.3109/10520298809107179 · Cited by 233
Engineered Bone Development from a Pre-Osteoblast Cell Line on Three-Dimensional Scaffolds
Shea, L. D., Wang, D., Franceschi, R. T., & Mooney, D. J. (2000) · Tissue Engineering · doi:10.1089/10763270050199550 · Cited by 229
Peter, S. J., Miller, S. T., Zhu, G. G., Yasko, A. W., & Mikos, A. G. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199807)41:1<1::aid-jbm1>3.0.co;2-n · Cited by 224
Self-citationPre-clinical in vivo evaluation of orthopaedic bioabsorbable devices
An, Y. H., Woolf, S. K., & Friedman, R. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00132-0 · Cited by 224
Peter, S. J., Kim, P., Yasko, A. W., Yaszemski, M. J., & Mikos, A. G. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19990305)44:3<314::aid-jbm10>3.0.co;2-w · Cited by 206
Self-citation
Cited by
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Porous scaffold design for tissue engineering
Hollister, S. J. (2005) · Nature Materials · doi:10.1038/nmat1421 · Cited by 3,969
Bone Tissue Engineering: State of the Art and Future Trends
Salgado, A. J., Coutinho, O. P., & Reis, R. L. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400026 · Cited by 1,681
Stem cell-based tissue engineering with silk biomaterials
Wang, Y., Kim, H.-J., Vunjak-Novakovic, G., & Kaplan, D. L. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.07.008 · Cited by 968
A Review of 3D Printing Technology for Medical Applications
Yan, Q., Dong, H., Su, J., Han, J., Song, B., Wei, Q., & Shi, Y. (2018) · Engineering · doi:10.1016/j.eng.2018.07.021 · Cited by 720
Self-Folding Thermo-Magnetically Responsive Soft Microgrippers
Breger, J. C., Yoon, C., Xiao, R., Kwag, H. R., Wang, M. O., Fisher, J. P., Nguyen, T. D., & Gracias, D. H. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am508621s · Cited by 655
Self-citationTan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Cheang, P., Abu Bakar, M. S., & Cha, S. W. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00131-5 · Cited by 625
Review: Photopolymerizable and Degradable Biomaterials for Tissue Engineering Applications
Ifkovits, J. L., & Burdick, J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0093 · Cited by 619
Patel, Z. S., Young, S., Tabata, Y., Jansen, J. A., Wong, M. E. K., & Mikos, A. G. (2008) · Bone · doi:10.1016/j.bone.2008.06.019 · Cited by 580
Self-citationBiomedical Applications of Biodegradable Polyesters
Manavitehrani, I., Fathi, A., Badr, H., Daly, S., Negahi Shirazi, A., & Dehghani, F. (2016) · Polymers · doi:10.3390/polym8010020 · Cited by 514
Karande, T. S., Ong, J. L., & Agrawal, C. M. (2004) · Annals of Biomedical Engineering · doi:10.1007/s10439-004-7825-2 · Cited by 457
Hannink, G., & Arts, J. J. C. (2011) · Injury · doi:10.1016/j.injury.2011.06.008 · Cited by 444
Mouriño, V., Cattalini, J. P., & Boccaccini, A. R. (2012) · Journal of The Royal Society Interface · doi:10.1098/rsif.2011.0611 · Cited by 441
Gelatin carriers for drug and cell delivery in tissue engineering
Santoro, M., Tatara, A. M., & Mikos, A. G. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.04.014 · Cited by 395
Self-citationDirect laser writing: Principles and materials for scaffold 3D printing
Selimis, A., Mironov, V., & Farsari, M. (2015) · Microelectronic Engineering · doi:10.1016/j.mee.2014.10.001 · Cited by 344
Kasten, P., Beyen, I., Niemeyer, P., Luginbühl, R., Bohner, M., & Richter, W. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.05.017 · Cited by 336
Stereolithography in tissue engineering
Skoog, S. A., Goering, P. L., & Narayan, R. J. (2014) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-013-5107-y · Cited by 321
Vascularized Bone Tissue Engineering: Approaches for Potential Improvement
Nguyen, L. H., Annabi, N., Nikkhah, M., Bae, H., Binan, L., Park, S., Kang, Y., Yang, Y., & Khademhosseini, A. (2012) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0012 · Cited by 313
Shi, X., Sitharaman, B., Pham, Q. P., Liang, F., Wu, K., Edward Billups, W., Wilson, L. J., & Mikos, A. G. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.05.033 · Cited by 306
Self-citationEvaluating 3D‐Printed Biomaterials as Scaffolds for Vascularized Bone Tissue Engineering
Wang, M. O., Vorwald, C. E., Dreher, M. L., Mott, E. J., Cheng, M., Cinar, A., Mehdizadeh, H., Somo, S., Dean, D., Brey, E. M., et al. (2015) · Advanced Materials · doi:10.1002/adma.201403943 · Cited by 301
Self-citationLee, K.-W., Wang, S., Fox, B. C., Ritman, E. L., Yaszemski, M. J., & Lu, L. (2007) · Biomacromolecules · doi:10.1021/bm060834v · Cited by 292
Functionalized synthetic biodegradable polymer scaffolds for tissue engineering.
Liu, X., Holzwarth, J. M., & Ma, P. X. (2012) · Macromolecular Bioscience · doi:10.1002/mabi.201100466 · Cited by 290
Cell-free and cell-based approaches for bone regeneration
Bueno, E. M., & Glowacki, J. (2009) · Nature Reviews Rheumatology · doi:10.1038/nrrheum.2009.228 · Cited by 279
Patel, Z. S., Yamamoto, M., Ueda, H., Tabata, Y., & Mikos, A. G. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.04.002 · Cited by 279
Self-citationScaffold fabrication by indirect three-dimensional printing
Lee, M., Dunn, J. C. Y., & Wu, B. M. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.040 · Cited by 267
Sitharaman, B., Shi, X., Walboomers, X. F., Liao, H., Cuijpers, V., Wilson, L. J., Mikos, A. G., & Jansen, J. A. (2008) · Bone · doi:10.1016/j.bone.2008.04.013 · Cited by 256
Self-citationChoi, J.-W., Wicker, R., Lee, S.-H., Choi, K.-H., Ha, C.-S., & Chung, I. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.05.004 · Cited by 200
Three-Dimensional Biodegradable Structures Fabricated by Two-Photon Polymerization
Claeyssens, F., Hasan, E. A., Gaidukeviciute, A., Achilleos, D. S., Ranella, A., Reinhardt, C., Ovsianikov, A., Shizhou, X., Fotakis, C., Vamvakaki, M., et al. (2009) · Langmuir · doi:10.1021/la803803m · Cited by 187
Patil, S. D., Papadimitrakopoulos, F., & Burgess, D. J. (2004) · Diabetes Technology & Therapeutics · doi:10.1089/dia.2004.6.887 · Cited by 135
Cai, Z., Wan, Y., Becker, M. L., Long, Y.-Z., & Dean, D. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.03.038 · Cited by 133
Self-citation
Metadata
- Authors
- Fisher, J. P., Vehof, J. W. M., Dean, D., van der Waerden, J. P. C. M., Holland, T. A., Mikos, A. G., & Jansen, J. A.
- Venue
- Journal of Biomedical Materials Research
- Publisher
- Wiley
- Published
- 2001-12-05
- Volume
- 59
- Issue
- 3
- Pages
- 547-556
- ISSN
- 0021-9304 (ISSN-L)
- 1097-4636
- OpenAlex
- W2105322733
- Cited by
- 254
- References
- 25
- FWCI
- 8.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.