CoChat

High‐Entropy Nanomaterials for Advanced Electrocatalysis

Open access
Lee, Sol A, Bu, Jeewon, Lee, Jiwoo, Jang, Ho Won · 2023 · Small Science

The DOI matches its Crossref record; 169 of the 169 references it cites were found in a registry or an index.

Abstract

High‐entropy alloys refer to near‐equimolar alloys of five or more elements and are receiving attention due to their unique physical and chemical properties. In electrocatalysis, they serve as active sites in multiple elements, favoring the optimized adsorption/desorption property toward the target reaction. High‐entropy nanomaterials (HENMs) are attractive candidates as electrocatalysts by taking advantage of a high surface‐to‐volume ratio and tailored composition. This review begins with the concept of high‐entropy materials and various strategies for designing electrocatalysts. Then, the recent advances in HENMs as electrocatalysts for various applications (water‐splitting reaction, carbon dioxide reduction reaction, alcohol oxidation reaction, etc.) are introduced with their catalytic performances. Finally, based on the current status of HENMs for electrocatalysis, the challenging aspects and the future insight of HENMs for advanced electrocatalysis are discussed and proposed.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/smsc.202200109

Cites

169 of 169 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Schematic illustration of various HEMs with their characteristics.
Figure 1 Schematic illustration of various HEMs with their characteristics.CC BY · PubMed Central
Figure 2 Top‐down method. a) Different stages in mechanical alloying. Reproduced with permission.[ 51 ] Copyright 2022, Elsevier. b) HAADF‐TEM compositional mapping of NiFeCrCoCu HEA NPs prepared by ball milling. Reproduced with permission.[ 52 ] Copyright 2022, Elsevier. c) Qualitative representation of the preparation of nanoporous ultra‐HEAs by dealloying. Reproduced with permission.[ 57 ] Copyright 2021, Royal Society of Chemistry. d) SEM image of the dealloyed‐nanostructured AlNiCoFeMo HEA. Reproduced with permission.[ 58 ] Copyright 2019, American Chemical Society. e) Schematic illustration of the laser‐based synthesis of HEA NPs. f) SEM image and EDX elemental mapping of laser‐generated CoCrFeNiMn HEA NPs. e,f) Reproduced with permission.[ 63 ] Copyright 2019, Royal Society of Chemistry.
Figure 2 Top‐down method. a) Different stages in mechanical alloying. Reproduced with permission.[ 51 ] Copyright 2022, Elsevier. b) HAADF‐TEM compositional mapping of NiFeCrCoCu HEA NPs prepared by ball milling. Reproduced with permission.[ 52 ] Copyright 2022, Elsevier. c) Qualitative representation of the preparation of nanoporous ultra‐HEAs by dealloying. Reproduced with permission.[ 57 ] Copyright 2021, Royal Society of Chemistry. d) SEM image of the dealloyed‐nanostructured AlNiCoFeMo HEA. Reproduced with permission.[ 58 ] Copyright 2019, American Chemical Society. e) Schematic illustration of the laser‐based synthesis of HEA NPs. f) SEM image and EDX elemental mapping of laser‐generated CoCrFeNiMn HEA NPs. e,f) Reproduced with permission.[ 63 ] Copyright 2019, Royal Society of Chemistry.CC BY · PubMed Central
Figure 3 Bottom‐up method. a) Schematic illustration of the pulse current electrodeposition method. b) SEM image of the electrodeposited FeCoNiMnW HEA. c) TEM image and EDX elemental mapping of FeCoNiMnW HEA. a–c) Reproduced with permission.[ 74 ] Copyright 2022, Elsevier. d) Qualitative representation of the hydrothermal synthesis method and application of FeCoNiMo HEA/C. e) HAADF–STEM–EDS elemental mappings of HEAs. d,e) Reproduced with permission.[ 76 ] Copyright 2022, American Chemical Society.
Figure 3 Bottom‐up method. a) Schematic illustration of the pulse current electrodeposition method. b) SEM image of the electrodeposited FeCoNiMnW HEA. c) TEM image and EDX elemental mapping of FeCoNiMnW HEA. a–c) Reproduced with permission.[ 74 ] Copyright 2022, Elsevier. d) Qualitative representation of the hydrothermal synthesis method and application of FeCoNiMo HEA/C. e) HAADF–STEM–EDS elemental mappings of HEAs. d,e) Reproduced with permission.[ 76 ] Copyright 2022, American Chemical Society.CC BY · PubMed Central
Figure 4 Strategies for developing HENMs for various electrocatalysis.
Figure 4 Strategies for developing HENMs for various electrocatalysis.CC BY · PubMed Central
Figure 5 HENMs for ORR. a) ORR polarization curves of HEA and Pt/C. b) Specific activity and mass activities at 0.9 V. c) Stability results after different cycles in O2‐saturated 0.1 m HClO4. a–c) Reproduced with permission.[ 60 ] Copyright 2019, Royal Society of Chemistry. d,e) ORR polarization curves of various HEAs. f,g) STEM images of the nanoporous AlCuNiPtMn. h) STEM–EDS mapping of the quinary nanoporous AlCuNiPtMn HEA. d–h) Reproduced with permission.[ 102 ] Copyright 2020, Elsevier.
Figure 5 HENMs for ORR. a) ORR polarization curves of HEA and Pt/C. b) Specific activity and mass activities at 0.9 V. c) Stability results after different cycles in O2‐saturated 0.1 m HClO4. a–c) Reproduced with permission.[ 60 ] Copyright 2019, Royal Society of Chemistry. d,e) ORR polarization curves of various HEAs. f,g) STEM images of the nanoporous AlCuNiPtMn. h) STEM–EDS mapping of the quinary nanoporous AlCuNiPtMn HEA. d–h) Reproduced with permission.[ 102 ] Copyright 2020, Elsevier.CC BY · PubMed Central
Figure 6 HENMs for OER. a) LSV curves of the various nanoporous HEAs. b) Tafel slope of the various nanoporous HEAs. c) Stability test results after different cyclic voltammetry (CV) cycles in 0.5 m H2SO4 solution. a–c) Reproduced with permission.[ 90 ] Copyright 2019, Wiley‐VCH. d) Structure of AlNiCoFeMo HEA covered with oxide. e) LSV curves of the nanoporous HEAs based on AlNiCoFe. f) Tafel slope of the nanoporous HEAs based on AlNiCoFe. d–f) Reproduced with permission.[ 58 ] Copyright 2019, American Chemical Society. g) Mixing metallic elements (i.e., Cr, Mn, Fe, Co, and Ni) into a high‐entropy sulfide NP. h) Comparison of overpotentials and metal element numbers among unary, binary, ternary, quaternary materials, and quinary HEMS. i) LSV curves of various HES. g–i) Reproduced with permission.[ 33 ] Copyright 2020, Wiley‐VCH.
Figure 6 HENMs for OER. a) LSV curves of the various nanoporous HEAs. b) Tafel slope of the various nanoporous HEAs. c) Stability test results after different cyclic voltammetry (CV) cycles in 0.5 m H2SO4 solution. a–c) Reproduced with permission.[ 90 ] Copyright 2019, Wiley‐VCH. d) Structure of AlNiCoFeMo HEA covered with oxide. e) LSV curves of the nanoporous HEAs based on AlNiCoFe. f) Tafel slope of the nanoporous HEAs based on AlNiCoFe. d–f) Reproduced with permission.[ 58 ] Copyright 2019, American Chemical Society. g) Mixing metallic elements (i.e., Cr, Mn, Fe, Co, and Ni) into a high‐entropy sulfide NP. h) Comparison of overpotentials and metal element numbers among unary, binary, ternary, quaternary materials, and quinary HEMS. i) LSV curves of various HES. g–i) Reproduced with permission.[ 33 ] Copyright 2020, Wiley‐VCH.CC BY · PubMed Central
Figure 7 HENMs for HER. a) Elemental mapping of Pt18Ni26Fe15Co14Cu27 NPs (scale bar: 5 nm). b) Binding energy mapping of HER. c) Comparison of mass activity and area activity for HER at −70 mV versus RHE. a–c) Reproduced with permission.[ 113 ] Copyright 2020, Springer Nature. d) Volcano plot of HER electrocatalysts achieved by computational method. e) J–V curves of HEA electrocatalysts measured in 0.5 m H2SO4. f) STEM and EDS elemental mapping of HEA PdMoGaInNi NSs. d–f) Reproduced with permission.[ 116 ] Copyright 2022, American Chemical Society. g) Theoretical calculation of reaction energy for water dissociation. h) Polarization curves of electrocatalysts in 1 m PBS electrolytes. g,h) Reproduced with permission.[ 59 ] Copyright 2021, Wiley‐VCH. i) Free‐energy diagram of HER at P sites and S sites in the basal‐plane model. j) Overpotentials (η 10) at current densities of 10 mA cm−2 and exchange current densities (j 0) of electrocatalysts. i,j) Reproduced with permission.[ 117 ] Copyright 2022, American Chemical Society.
Figure 7 HENMs for HER. a) Elemental mapping of Pt18Ni26Fe15Co14Cu27 NPs (scale bar: 5 nm). b) Binding energy mapping of HER. c) Comparison of mass activity and area activity for HER at −70 mV versus RHE. a–c) Reproduced with permission.[ 113 ] Copyright 2020, Springer Nature. d) Volcano plot of HER electrocatalysts achieved by computational method. e) J–V curves of HEA electrocatalysts measured in 0.5 m H2SO4. f) STEM and EDS elemental mapping of HEA PdMoGaInNi NSs. d–f) Reproduced with permission.[ 116 ] Copyright 2022, American Chemical Society. g) Theoretical calculation of reaction energy for water dissociation. h) Polarization curves of electrocatalysts in 1 m PBS electrolytes. g,h) Reproduced with permission.[ 59 ] Copyright 2021, Wiley‐VCH. i) Free‐energy diagram of HER at P sites and S sites in the basal‐plane model. j) Overpotentials (η 10) at current densities of 10 mA cm−2 and exchange current densities (j 0) of electrocatalysts. i,j) Reproduced with permission.[ 117 ] Copyright 2022, American Chemical Society.CC BY · PubMed Central
Figure 8 a,b) HENMs for CO2RR. CO2RR/CORR selectivity–CORR activity plots of CoCuGaNiZn (a) and AgAuCuPdPt (b). a,b) Reproduced with permission.[ 128 ] Copyright 2020, American Chemical Society. c) Faradaic efficiencies of products (CO, CH4, C2H4, and H2). d) Free‐energy diagram of CO2RR. c,d) Reproduced with permission.[ 140 ] Copyright 2020, American Chemical Society. e) EDS mapping of elements TMDC HEA. f) FE of HCOOH, H2, and CO of TMDC HEAs at different potentials. g) Theoretical calculation of free‐energy pathway of CO2 reduction. e–g) Reproduced with permission.[ 129 ] Copyright 2021, Wiley‐VCH.
Figure 8 a,b) HENMs for CO2RR. CO2RR/CORR selectivity–CORR activity plots of CoCuGaNiZn (a) and AgAuCuPdPt (b). a,b) Reproduced with permission.[ 128 ] Copyright 2020, American Chemical Society. c) Faradaic efficiencies of products (CO, CH4, C2H4, and H2). d) Free‐energy diagram of CO2RR. c,d) Reproduced with permission.[ 140 ] Copyright 2020, American Chemical Society. e) EDS mapping of elements TMDC HEA. f) FE of HCOOH, H2, and CO of TMDC HEAs at different potentials. g) Theoretical calculation of free‐energy pathway of CO2 reduction. e–g) Reproduced with permission.[ 129 ] Copyright 2021, Wiley‐VCH.CC BY · PubMed Central
Figure 9 HENMs for alcohol oxidation reaction. a) CV curves of PGM–HEA and monometallic NPs in 1.0 m KOH + 1.0 m ethanol. b) Comparison of the j specific values of PGM–HEA at potentials of 0.45 V and 0.6 V in the forward scan with those of the monometallic catalysts and the reported Au@PtIr/C. a,b) Reproduced with permission.[ 133 ] Copyright 2020, American Chemical Society. c) CV curves of PdPtCuAgAu HEA NWs and other Pd‐based nanomaterials in 1.0 m KOH + 1.0 m ethanol. d) Chronoamperometry curves obtained with PdPtCuAgAu HEA NWs and other Pd‐based nanomaterials in 1.0 m KOH + 1.0 m ethanol. c,d) Reproduced with permission.[ 132 ] Copyright 2022, Elsevier.
Figure 9 HENMs for alcohol oxidation reaction. a) CV curves of PGM–HEA and monometallic NPs in 1.0 m KOH + 1.0 m ethanol. b) Comparison of the j specific values of PGM–HEA at potentials of 0.45 V and 0.6 V in the forward scan with those of the monometallic catalysts and the reported Au@PtIr/C. a,b) Reproduced with permission.[ 133 ] Copyright 2020, American Chemical Society. c) CV curves of PdPtCuAgAu HEA NWs and other Pd‐based nanomaterials in 1.0 m KOH + 1.0 m ethanol. d) Chronoamperometry curves obtained with PdPtCuAgAu HEA NWs and other Pd‐based nanomaterials in 1.0 m KOH + 1.0 m ethanol. c,d) Reproduced with permission.[ 132 ] Copyright 2022, Elsevier.CC BY · PubMed Central
Figure 10 Promising directions of developing HENMs as advanced electrocatalysts.
Figure 10 Promising directions of developing HENMs as advanced electrocatalysts.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 3

  1. Sun Y., 2021, Sci. Adv., 7, 2375
  2. She Z. W., 1979, Science, 2017, 146
  3. Han N., 2020, Adv. Energy Mater., 10, 190238

Cited by

See all 101

Metadata

Authors
Lee, S. A., Bu, J., Lee, J., & Jang, H. W.
Affiliations
  • California Institute of Technology (US)
  • Seoul National University (KR)
Corresponding author
Jang, Ho Won
Venue
Small Science
Publisher
Wiley
Published
2023-04-05
Volume
3
Issue
5
Pages
2200109-2200109
ISSN
2688-4046 (ISSN-L)
OpenAlex
W4362607287
Cited by
95
References
168
Citations by year
2026: 26 · 2025: 36 · 2024: 28 · 2023: 5
FWCI
4.53
Type
journal article
Language
en
Open access
Locations
  • Small Science (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • National Research Foundation of Korea (2021R1C12006142, 2020M2D8A2069830)
  • Korea Research Institute of Standards and Science
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Engineering › Mechanical Engineering › High Entropy Alloys Studies
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › CO2 Reduction Techniques and Catalysts
Keywords
high-entropy alloys, electrocatalysis, electrocatalyst design, water splitting, carbon dioxide reduction, alcohol oxidation, surface-to-volume ratio, adsorption-desorption

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.