Geodetic methods to determine the relativistic redshift at the level of 10 $$^{-18}$$ - 18 in the context of international timescales: a review and practical results
Open accessThe DOI matches its Crossref record; 101 of the 101 references it cites were found in a registry or an index; 10 of the 77 sources its claims cite were checked for support.
Abstract
The frequency stability and uncertainty of the latest generation of optical atomic clocks is approaching the 10^-18 level; the paper reviews levelling and GNSS/geoid approaches for determining gravity potential for relativistic redshift correction.
Overview
CoChat Summary
## TL;DR
The paper reviews how to determine gravity potential for relativistic redshift corrections at the 10^-18 level, focusing on geometric levelling and the GNSS/geoid approach for optical clock sites. Using clock sites in Germany and France, it finds that the two approaches differ at the decimetre level over inter-country distances, while GNSS/geoid is the recommended route for absolute potential values for international timescales.
## Key findings
- A fractional frequency shift of 1 part in 10^-18 corresponds to about 0.1 m^2 s^-2 in gravity potential difference, equivalent to about 0.01 m in height.
- For four optical clock sites (PTB, LUH, MPQ, OBSPARIS), the consistency check between GNSS and levelling heights showed residuals up to 11 mm (PTB), 9 mm (LUH), 2 mm (MPQ), and 5 mm (OBSPARIS) when the quasigeoid was treated as a horizontal plane; against EGG2015 the residuals were up to 6 mm, 1 mm, 2 mm, and 5 mm, respectively.
- Differences between geopotential numbers from geometric levelling and GNSS/geoid ranged from +0.014 to -0.109 gpu, equivalent to +0.014 to -0.111 m; for site pairs the discrepancies were 0.010 m (PTB-LUH, 52 km), 0.032 m (PTB-MPQ, 457 km), 0.042 m (LUH-MPQ, 480 km), and about 0.10 m for OBSPARIS versus the German sites over 650–700 km.
- The paper states that the GNSS/geoid approach gives absolute gravity potential values with present uncertainty of about 2.2 cm in height and about 2 × 10^-18 in relativistic redshift correction; for shorter local comparisons, geometric levelling can reach uncertainties down to a few parts in 10^-19.
## Methods
- Review paper with theory sections on relativistic reference systems, proper vs coordinate time, gravitational redshift, and time/gravity potential relations, plus a practical comparison of geodetic methods.
- Empirical case study at four clock sites: PTB (Braunschweig), LUH (Hannover), MPQ (Garching), and OBSPARIS (Paris), using geometric levelling, GNSS observations, and the EGG2015 quasigeoid model.
- Main analyses included consistency checks between GNSS and levelling heights, conversion to the zero-tide system and EVRF2007/ITRF2008, and comparison of geopotential numbers from the geometric levelling and GNSS/geoid approaches.
## Limitations
- The paper states that the practical results are based on the static part of the gravity field; temporal variations are assumed to be handled separately by reductions.
- It explicitly notes that the quoted GNSS/geoid uncertainty is a best-case scenario, requiring a state-of-the-art satellite model and sufficiently dense, high-quality terrestrial gravity/terrain data within about 50–100 km.
- Evident from the text: the clock-site study covers only four sites and the paper does not report a direct optical-clock measurement campaign here, so conclusions about redshift corrections are geodetically inferred rather than experimentally validated by clocks in this paper.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
6 Valid · 6 Not valid · 51 Not checked · 152 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The frequency stability and uncertainty of the latest generation of optical atomic clocks is now approaching the one part in 10 18 level.”
- Also stated in: § 1 Introduction · boosted
“The optical clocks operate at frequencies about five orders of magnitude higher than the caesium clocks and thus achieve a higher frequency stability, approaching fractional stabilities and uncertainties of one part in 10 18 (Chou et al. 2010;Hinkley et al. 2013;Bloom et al. 2014;Nicholson et al. 2015;Ushijima et al. 2015;Huntemann et al. 2016).”
§ Geodetic methods to determine the relativistic redshift at the level of 10 -18 in the context of international timescales: a review and practical results > Abstract
What the sources say
- Supportedcites Chou et al. 2010 source
The paper reports an Al⁺ optical clock with fractional frequency inaccuracy of 8.6 × 10⁻¹⁸ (p. 1). Its summary reports a comparison uncertainty of 7.0 × 10⁻¹⁸ and stability that improves with averaging time (p. 4), supporting the broad claim that optical-clock uncertainty and stability were approaching the 10⁻¹⁸ level. (LLM, conf=0.87)
- Partly supportedcites Hinkley et al. 2013 sourceExperimental — accuracy not yet measured
The paper reports clock instability of 1.6 parts in 10^18 (p. 4), supporting the stability part of the claim. But it distinguishes instability from systematic uncertainty: on p. 8, it says one clock had been evaluated at 3 parts in 10^16 uncertainty, the other had not yet been evaluated, and 10^17-level uncertainty was anticipated rather than achieved. (LLM, conf=0.90)
- Supportedcites Bloom et al. 2014 source
The Introduction (pp. 2–3) reports a fractional-frequency uncertainty of 6.4×10⁻¹⁸ and instability of 3×10⁻¹⁸ at 10,000 seconds for an optical lattice clock. These measurements support the claim that optical-clock stability and uncertainty were approaching one part in 10¹⁸. (LLM, conf=0.93)
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 1 Introduction · boosted
Every source the paper cites for this claim was checked and supports it.
In the paper
“In this context, geodynamic effects also lead to additional velocity contributions, and the effect of these on time and frequency comparisons has to be considered (see Gersl et al. 2015).”
§ Geodetic methods to determine the relativistic redshift at the level of 10 -18 in the context of international timescales: a review and practical results > 2.4 Time and the gravity potential
What the sources say
- Supportedcites Gersl et al. 2015 source
Section 3 (Time transfer) identifies Earth tides as causing residual velocity and quantifies their contribution to a time-transfer correction. Section 6.3 reports tidal contributions to both time- and frequency-transfer corrections, supporting the claim that geodynamic effects must be considered in comparisons. (LLM, conf=0.92)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“A first attempt in this direction was the comparison of two strontium optical clocks between PTB and OBSPARIS via a fibre link, showing an uncertainty and agreement with the geodetic results of about 5 × 10 -17 (Lisdat et al. 2016).”
§ Geodetic methods to determine the relativistic redshift at the level of 10 -18 in the context of international timescales: a review and practical results > 5 Discussion and conclusions
What the sources say
- Partly supportedcites Lisdat et al. 2016 sourceExperimental — accuracy not yet measured
The Experimental layout and Campaigns results describe the Paris–PTB strontium-clock comparison over a fibre link and report a fractional offset of (4.7 ± 5.0) × 10−17, consistent with agreement between the clocks. The Campaigns results say geodetic measurements supplied a gravity-potential correction; they do not report a separate agreement with geodetic results at 5 × 10−17. No page numbers are available in our copy. (LLM, conf=0.86)
plainstates an associationSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“This was mainly limited by the uncertainty and instability of the participating clocks, which is likely to improve in the near future.”
§ Geodetic methods to determine the relativistic redshift at the level of 10 -18 in the context of international timescales: a review and practical results > 5 Discussion and conclusions
What the sources say
- Supportedcites Lisdat et al. 2016 source
The Results (‘Campaigns to compare the strontium optical clocks’) report that link instability was negligible during the comparison. The Results (‘Optical clock performance’) give the participating clocks’ uncertainties and instabilities, supporting the claim that the clocks were the main limitation. (LLM, conf=0.90)
plainstates a causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“However, the corresponding omission error at these wavelengths is still quite significant with values at the level of several decimetres, e.g.0.94 m for n = 90, 0.42 m for n = 200, and 0.23 m for n = 360.”
§ Geodetic methods to determine the relativistic redshift at the level of 10 -18 in the context of international timescales: a review and practical results > 3.2 The GNSS/geoid approach
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
79 more claims
Create a free account to see all 215 claims and to verify the 3 references still open.
- It may state two separate claims as one. 92
- Probably not a substantial claim. 66
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“it is currently limited less by clock physics than by the practical reach of stable optical frequency links”
From Chapter 1 Theoretical background (1996) · cites this paper as [4]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The chronometrically measured geopotential difference of 3918 . 1(2 . 6) m 2 s -2 agrees with an independent geodetic determination of 3915 . 88(0 . 30) m 2 s -2 .”
From Long-distance chronometric leveling with a portable optical clock (2024) · cites this paper as [23]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The chronometrically measured geopotential difference of 3918 . 1(2 . 6) m 2 s -2 agrees with an independent geodetic determination of 3915 . 88(0 . 30) m 2 s -2 .”
From Long-distance chronometric leveling with a portable optical clock (2024) · cites this paper as [23]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“They showed that the GNSS/geoid approach provides better results than geometric levelling.”
From Time transfer and significance of vertical land motion in relativistic geodesy applications: a review paper (2023) · cites this paper as Denker et al. (2018)
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“This method, due to the error sources mentioned in Denker et al. (2018) such as uncertainties because of utilizing GNSS measurements, sprite leveling, geoid models, etc., is not accurate to millimeter/ submillimeter level.”
From Time transfer and significance of vertical land motion in relativistic geodesy applications: a review paper (2023) · cites this paper as Denker et al. (2018)
Experimental — accuracy not yet measured
17 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Theory and Experiment in Gravitational Physics
Will, C. M. (2018) · doi:10.1017/9781316338612 · Cited by 3,637
Theory and Experiment in Gravitational Physics
Will, C. M. (1993) · doi:10.1017/cbo9780511564246 · Cited by 3,632 · cited 1×
“In textbooks (see, for example, Cheng 2005; Lambourne 2010; Misner et al. 1973; Moritz and Hofmann-Wellenhof 1993; Schutz 2003, 2009; Will 1993) the redshift effect is usually explained by assuming a stationary gravitational field (with time-independent metric) as well as a static emitter and…”
BackgroundThe development and evaluation of the Earth Gravitational Model 2008 (EGM2008)
Pavlis, N. K., Holmes, S. A., Kenyon, S. C., & Factor, J. K. (2012) · Journal of Geophysical Research: Solid Earth · doi:10.1029/2011jb008916 · Cited by 2,641 · cited 6×
“Taking into account the given uncertainty estimates for the global geopotential model coefficients (including the uncertainty contribution of GM, see above) and the terrestrial data (assuming a standard deviation of 1 mGal with correlated noise), and supposing that a least-squares spectral combination of the satellite…”
BackgroundInfluentialLudlow, A. D., Boyd, M. M., Ye, J., Peik, E., & Schmidt, P. O. (2015) · Reviews of Modern Physics · doi:10.1103/revmodphys.87.637 · Cited by 2,385
Self-citationAltamimi, Z., Rebischung, P., Métivier, L., & Collilieux, X. (2016) · Journal of Geophysical Research: Solid Earth · doi:10.1002/2016jb013098 · Cited by 1,427
ITRF2008: an improved solution of the international terrestrial reference frame
Altamimi, Z., Collilieux, X., & Métivier, L. (2011) · Journal of Geodesy · doi:10.1007/s00190-011-0444-4 · Cited by 1,181 · cited 4×
“Ellipsoidal coordinates are given in Table 2 at the epoch 2005.0, the standard reference epoch associated with the ITRF2008 (see Altamimi et al. 2011).”
BackgroundMethodInfluentialHeiskanen, W. A., & Moritz, H. (1967) · Bulletin géodésique · doi:10.1007/bf02525647 · Cited by 1,144
(2014) · Dictionary Geotechnical Engineering/Wörterbuch GeoTechnik · doi:10.1007/978-3-642-41714-6_10674 · Cited by 1,137
An optical lattice clock with accuracy and stability at the 10−18 level
Bloom, B. J., Nicholson, T. L., Williams, J. R., Campbell, S. L., Bishof, M., Zhang, X., Zhang, W., Bromley, S. L., & Ye, J. (2014) · Nature · doi:10.1038/nature12941 · Cited by 1,073
A First Course in General Relativity
Schutz, B. (2022) · Cambridge University Press eBooks · doi:10.1017/9781108610865 · Cited by 944
Research works printed but not linked: 5
- Ihde J, Barzaghi R, Marti U, Sánchez L, Sideris M, Drewes H, Foerste C, Gruber T, Liebsch G, Pail R (2015) Report of the Ad-hoc Group on an International Height Reference System (IHRS). In: Drewes H, Hornik H (eds) IAG Travaux, vol 39, pp 549–557, Reports 2011–2015
- Rebischung P, Duquenne H, Duquenne F (2008) The new French zero-order levelling network—first global results and possible consequences for UELN. EUREF 2008 symposium, Brussels, Belgium, 18–21 June 2008
- Ries JC (2014) The scale of the terrestrial reference frame from VLBI and SLR. IERS unified analysis workshop, Pasadena, CA, 27–28 June 2014. https://www.iers.org/SharedDocs/Publikationen/EN/IERS/Workshops/UAW2014/Ries_RefFrame.pdf?__blob=publicationFile&v=2
- Sacher M, Ihde J, Liebsch G, Mäkinen J (2008) EVRF2007 as realization of the European Vertical Reference System. In: EUREF symposium, Brussels, Belgium, 18–21 June 2008
- Smith D, Véronneau M, Roman D, Huang JL, Wang YM, Sideris M (2010) Towards the unification of the vertical datums over the North American continent. In: IAG Commission 1 Symposium 2010, Reference Frames for Applications in Geosciences (REFAG2010), Marne-La-Vallée, France, 4–8 Oct 2010
Cited by
Atomic clock performance enabling geodesy below the centimetre level
McGrew, W. F., Zhang, X., Fasano, R. J., Schäffer, S. A., Beloy, K., Nicolodi, D., Brown, R. C., Hinkley, N., Milani, G., Schioppo, M., et al. (2018) · Nature · doi:10.1038/s41586-018-0738-2 · Cited by 727
(2019) · doi:10.1103/physrevlett.123.033201 · Cited by 711
Test of general relativity by a pair of transportable optical lattice clocks
Takamoto, M., Ushijima, I., Ohmae, N., Yahagi, T., Kokado, K., Shinkai, H., & Katori, H. (2020) · Nature Photonics · doi:10.1038/s41566-020-0619-8 · Cited by 507
Geodesy and metrology with a transportable optical clock
Grotti, J., Koller, S., Vogt, S., Häfner, S., Sterr, U., Lisdat, C., Denker, H., Voigt, C., Timmen, L., Rolland, A., et al. (2018) · Nature Physics · doi:10.1038/s41567-017-0042-3 · Cited by 495
Self-citationMehlstäubler, T. E., Grosche, G., Lisdat, C., Schmidt, P. O., & Denker, H. (2018) · Reports on Progress in Physics · doi:10.1088/1361-6633/aab409 · Cited by 263
“Based on the law of error propagation, the uncertainty (standard deviation) for a regionally computed height anomaly ζ, based on the combination of a global geopotential model with terrestrial data, is about 2 cm (Denker et al. 2017); this estimate represents an optimistic scenario and it is only valid for the case th…”
InfluentialSelf-citationAdvances in the accuracy, stability, and reliability of the PTB primary fountain clocks
Weyers, S., Gerginov, V, Kazda, M., Rahm, J., Lipphardt, B., Dobrev, G., & Gibble, K. (2018) · Metrologia · doi:10.1088/1681-7575/aae008 · Cited by 140
Roadmap towards the redefinition of the second
Dimarcq, N., Gertsvolf, M., Mileti, G., Bize, S., Oates, C. W., Peik, E., Calonico, D., Ido, T., Tavella, P., Meynadier, F., et al. (2023) · Metrologia · doi:10.1088/1681-7575/ad17d2 · Cited by 205
Point-to-point stabilized optical frequency transfer with active optics
Dix-Matthews, B. P., Schediwy, S., Gozzard, D. R., Savalle, E., Esnault, F.-X., Lévèque, T., Gravestock, C., D’Mello, D., Karpathakis, S., Tobar, M. E., et al. (2021) · Nature Communications · doi:10.1038/s41467-020-20591-5 · Cited by 85
Cold atoms in space: community workshop summary and proposed road-map
Alonso, I., Alpigiani, C., Altschul, B., Araújo, H. M., Arduini, G., Arlt, J., Badurina, L., Balaž, A., Bandarupally, S., Barish, B. C., et al. (2022) · EPJ Quantum Technology · doi:10.1140/epjqt/s40507-022-00147-w · Cited by 59
Intercontinental comparison of optical atomic clocks through very long baseline interferometry
Pizzocaro, M., Sekido, M., Takefuji, K., Ujihara, H., Hachisu, H., Nemitz, N., Tsutsumi, M., Kondo, T., Kawai, E., Ichikawa, R., et al. (2021) · Nature Physics · doi:10.1038/s41567-020-01038-6 · Cited by 64
Self-citationPizzocaro, M., Bregolin, F., Barbieri, P., Rauf, B., Levi, F., & Calonico, D. (2020) · Metrologia · doi:10.1088/1681-7575/ab50e8 · Cited by 63
Towards a transportable aluminium ion quantum logic optical clock
Hannig, S., Pelzer, L., Scharnhorst, N., Kramer, J., Stepanova, M., Xu, Z. T., Spethmann, N., Leroux, I. D., Mehlstäubler, T. E., & Schmidt, P. O. (2019) · Review of Scientific Instruments · doi:10.1063/1.5090583 · Cited by 75
Towards a transportable aluminium ion quantum logic optical clock
Hannig, S., Pelzer, L., Scharnhorst, N., Kramer, J., Stepanova, M., Xu, Z., Spethmann, N., Leroux, I. D., Mehlstäubler, T. E., & Schmidt, P. O. (2019) · Institutional Repository of Leibniz Universität Hannover (Leibniz Universität Hannover) · doi:10.15488/12800 · Cited by 56
Geopotential measurement with a robust, transportable Ca+ optical clock
Huang, Y., Zhang, H., Zhang, B., Hao, Y., Guan, H., Zeng, M., Chen, Q., Lin, Y., Wang, Y., Cao, S., et al. (2020) · Physical Review A · doi:10.1103/physreva.102.050802 · Cited by 52
Optical frequency ratio of a 171Yb+ single-ion clock and a 87Sr lattice clock
Dörscher, S., Huntemann, N., Schwarz, R., Lange, R., Benkler, E., Lipphardt, B., Sterr, U., Peik, E., & Lisdat, C. (2021) · Metrologia · doi:10.1088/1681-7575/abc86f · Cited by 53
The unit of time: Present and future directions
Bize, S. (2019) · Comptes Rendus. Physique · doi:10.1016/j.crhy.2019.02.002 · Cited by 47
A lab-based test of the gravitational redshift with a miniature clock network
Zheng, X., Dolde, J., Cambria, M. C., Lim, H. M., & Kolkowitz, S. (2023) · Nature Communications · doi:10.1038/s41467-023-40629-8 · Cited by 47
Hobson, R., Bowden, W., Vianello, A., Silva, A., Baynham, C. F. A., Margolis, H. S., Baird, P. E. G., Gill, P., & Hill, I. R. (2020) · Metrologia · doi:10.1088/1681-7575/abb530 · Cited by 58
In + 115 − Yb + 172 Coulomb Crystal Clock with 2.5 × 10 − 18 Systematic Uncertainty
Hausser, H. N., Keller, J., Nordmann, T., Bhatt, N. M., Kiethe, J., Liu, H., Richter, I. M., von Boehn, M., Rahm, J., Weyers, S., et al. (2025) · Physical Review Letters · doi:10.1103/physrevlett.134.023201 · Cited by 97
Direct comparisons of European primary and secondary frequency standards via satellite techniques
Riedel, F., Al-Masoudi, A., Benkler, E., Dörscher, S., Gerginov, V, Grebing, C., Häfner, S., Huntemann, N., Lipphardt, B., Lisdat, C., et al. (2020) · Metrologia · doi:10.1088/1681-7575/ab6745 · Cited by 38
“CRefMk is the geopotential number for a specific nearby reference marker based on the geodetic GNSS/geoid approach [30,32], ∆H is the local height difference between the clock and a specific reference marker with ∆H = Hclock −HRefMk, g is the local acceleration due to gravity derived from an FG5-X absolute gravimeter…”
BackgroundSelf-citationA 87 Sr optical lattice clock with 2.9 × 10 − 17 uncertainty and its absolute frequency measurement
Lin, Y., Wang, Q., Meng, F., Cao, S., Wang, Y., Li, Y., Sun, Z. G., Lu, B.-K., Yang, T., Lin, B.-K., et al. (2021) · Metrologia · doi:10.1088/1681-7575/abf33e · Cited by 41
171 Yb + optical clock with 2.2 × 10 − 18 systematic uncertainty and absolute frequency measurements
Tofful, A., Baynham, C. F. A., Curtis, E. A., Parsons, A. O., Robertson, B., Schioppo, M., Tunesi, J., Margolis, H. S., Hendricks, R., Whale, J., et al. (2024) · Metrologia · doi:10.1088/1681-7575/ad53cd · Cited by 60
“A combination of geodetic levelling and GNSS methods [36] was used to determine the geopotential relative to the conventional equi-potential W 0 = 62636856 .”
MethodExploring the foundations of the physical universe with space tests of the equivalence principle
Battelier, B., Bergé, J., Bertoldi, A. D., Blanchet, L., Bongs, K., Bouyer, P., Braxmaier, C., Calonico, D., Fayet, P., Gaaloul, N., et al. (2021) · Experimental Astronomy · doi:10.1007/s10686-021-09718-8 · Cited by 66
Long-distance chronometric leveling with a portable optical clock
Grotti, J., Nosske, I., Koller, S. B., Herbers, S., Denker, H., Timmen, L., Vishnyakova, G., Grosche, G., Waterholter, T., Kuhl, A., et al. (2024) · Physical Review Applied · doi:10.1103/physrevapplied.21.l061001 · Cited by 33
“0 × 10 − 15 / τ/ s, Fig.”
InfluentialExploring potential applications of optical lattice clocks in a plate subduction zone
Tanaka, Y., & Katori, H. (2021) · Journal of Geodesy · doi:10.1007/s00190-021-01548-y · Cited by 31
“2016) are expected to unify height reference systems across countries, which improves accuracy and cost for geodetic leveling (Denker et al. 2017).”
BackgroundClock networks for height system unification: a simulation study
Wu, H., Müller, J., & Lämmerzahl, C. (2019) · Geophysical Journal International · doi:10.1093/gji/ggy508 · Cited by 30
Ab initio quantum theory of mass defect and time dilation in trapped-ion optical clocks
Martínez-Lahuerta, V. J., Eilers, S., Mehlstäubler, T. E., Schmidt, P. O., & Hammerer, K. (2022) · Physical Review A · doi:10.1103/physreva.106.032803 · Cited by 30
Robust optical clock transitions in trapped ions using dynamical decoupling
Aharon, N., Spethmann, N., Leroux, I. D., Schmidt, P. O., & Retzker, A. (2019) · New Journal of Physics · doi:10.1088/1367-2630/ab3871 · Cited by 34
Chronometric Geodesy: Methods and Applications
Delva, P., Denker, H., & Lion, G. (2019) · Fundamental Theories of Physics · doi:10.1007/978-3-030-11500-5_2 · Cited by 28
“ce of a relativistic reference system is the spatial part of the geocentric celestial reference system (GCRS) together with the terrestrial time (TT) as a coordinate time (see section 2.3). Following [80, 81], the 19 coordinate to proper time transformation can be written down to a relative accuracy of 10 18 as: d˝ dT…”
BackgroundMethodInfluentialSelf-citationEvaluating Optical Clock Performance for GNSS Positioning
Boldbaatar, E., Grant, D., Choy, S., Zaminpardaz, S., & Holden, L. (2023) · Sensors · doi:10.3390/s23135998 · Cited by 32
Using quantum optical sensors for determining the Earth’s gravity field from space
Müller, J., & Wu, H. (2020) · Journal of Geodesy · doi:10.1007/s00190-020-01401-8 · Cited by 32
“In geodesy, gravity potential values are used as so-called geopotential numbers which are the core of any physical height (Torge and Müller 2012; Denker et al. 2018).”
MethodCoherent Excitation of the Highly Forbidden Electric Octupole Transition in Yb+172
Fürst, H. A., Yeh, C.-H., Kalincev, D., Kulosa, A. P., Dreissen, L. S., Lange, R., Benkler, E., Huntemann, N., Peik, E., & Mehlstäubler, T. E. (2020) · Physical Review Letters · doi:10.1103/physrevlett.125.163001 · Cited by 27
Calibration of a superconducting gravimeter with an absolute atom gravimeter
Merlet, S., Gillot, P., Cheng, B., et al. (2021) · Journal of Geodesy · doi:10.1007/s00190-021-01516-6 · Cited by 22
“To do so, we took the opportunity of a measurement campaign organised in the frame of the ITOC project (Denker et al. 2018) to welcome again in the LNE gravimetry laboratory the free fall corner cube gravimeter FG5-220 of the Institute of Geodesy of Leibniz University Hannover, in its improved…”
BackgroundLu, X., Guo, F., Wang, Y., Xu, Q., Zhou, C., Xia, J., Wu, W., & Chang, H. (2023) · Metrologia · doi:10.1088/1681-7575/acb05c · Cited by 24
Coordinated international comparisons between optical clocks connected via fiber and satellite links
Lindvall, T., Pizzocaro, M., Godun, R. M., Abgrall, M., Akamatsu, D., Amy‐Klein, A., Benkler, E., Bhatt, N., Calonico, D., Cantin, E., et al. (2025) · Optica · doi:10.1364/optica.561754 · Cited by 37
“00 m 2 s − 2 [18,35].”
The 50th Anniversary of the Atomic Second
Arias, E. F., Matsakis, D. N., Quinn, T., & Tavella, P. (2018) · IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · doi:10.1109/tuffc.2018.2823591 · Cited by 19
Atmospheric refraction corrections in ground-to-satellite optical time transfer
Stuhl, B. (2021) · Optics Express · doi:10.1364/oe.421620 · Cited by 20
Optical atomic clocks: defining the future of time and frequency metrology
Fortier, T. M., Luiten, A. N., & Margolis, H. S. (2025) · Optica · doi:10.1364/optica.575770 · Cited by 43
Reciprocity of propagation in optical fiber links demonstrated to 10−21
Xu, D., Delva, P., Lopez, O., Amy-Klein, A., & Pottie, P.-E. (2019) · Optics Express · doi:10.1364/oe.27.036965 · Cited by 15
Self-citationExcited-Band Coherent Delocalization for Improved Optical Lattice Clock Performance
Siegel, J. L., McGrew, W. F., Hassan, Y. S., Chen, C.-C., Beloy, K., Grogan, T., Zhang, X., & Ludlow, A. D. (2024) · Physical Review Letters · doi:10.1103/physrevlett.132.133201 · Cited by 17
“As optical lattice clocks continue to improve, they promise to surpass classical geodetic measurement [11–13], to detect gravitational waves [14, 15], and to more deeply probe beyond-Standard-Model physics [16, 17].”
BackgroundTowards optical frequency geopotential difference measurements via a flying drone
Dix-Matthews, B. P., Gozzard, D. R., Walsh, S. M., McCann, A., Karpathakis, S., Frost, A. M., Gravestock, C., & Schediwy, S. (2023) · Optics Express · doi:10.1364/oe.483767 · Cited by 12
Transportable strontium lattice clock with 4 × 10 − 19 blackbody radiation shift uncertainty
Nosske, I., Vishwakarma, C., Lücke, T., Rahm, J., Poudel, N., Weyers, S., Benkler, E., Dörscher, S., & Lisdat, C. (2025) · Quantum Science and Technology · doi:10.1088/2058-9565/ae1161 · Cited by 19
Wu, Y., & Shen, W. (2021) · Advances in Space Research · doi:10.1016/j.asr.2021.05.005 · Cited by 10
Delva, P., & Geršl, J. (2017) · Universe · doi:10.3390/universe3010024 · Cited by 10
Wu, K., Shen, W., Sun, X. L., Cai, C., & Shen, Z. (2023) · Geo-spatial Information Science · doi:10.1080/10095020.2023.2231515 · Cited by 9
“For instance, the unit of time of the International System of Units (SI), the second, was officially defined with respect to a specified hyper-fine transition of the cesium-133 atom in 1967 (Denker et al. 2018).”
Absolute frequency measurements with a robust, transportable 40Ca+ optical clock
Zhang, H., Huang, Y., Zhang, B., Hao, Y., Zeng, M., Chen, Q., Wang, Y., Cao, S., Lin, Y., Fang, Z., et al. (2023) · Metrologia · doi:10.1088/1681-7575/acd05d · Cited by 9
An empirical noise model for the benefit of model-based hydrodynamic leveling
Afrasteh, Y., Slobbe, C., Verlaan, M., Klees, R., Guarneri, H., Keyzer, L., Pietrzak, J. D., Sacher, M., Snellen, M., & Zijl, F. (2022) · Journal of Geodesy · doi:10.1007/s00190-022-01694-x · Cited by 8
Robust Optical Clocks for International Timescales (ROCIT)
Margolis, H. S., Godun, R. M., Huntemann, N., Targat, R. L., Pizzocaro, M., Zawada, M., Abgrall, M., Akamatsu, D., Martínez, H. Á., Amy‐Klein, A., et al. (2024) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2889/1/012022 · Cited by 9
“Comparisons using this network benefit from the European quasi-geoid model computed as part of an earlier European project, “International Timescales with Optical Clocks” (ITOC) [9], which incorporated new gravity measurements carried out at and around the NMI sites [10, 11].”
Šprlák, M., & Pitoňák, M. (2024) · Surveys in Geophysics · doi:10.1007/s10712-024-09842-y · Cited by 5
Šprlák, M., & Pitoňák, M. (2024) · Surveys in Geophysics · doi:10.1007/s10712-023-09818-4 · Cited by 5
“The broad class of the gravitational field quantities is considered here as they can be observed by available mechanical, electronic, or quantum sensors (e.g. Rummel 2010; Torge and Müller 2012; Rosi et al. 2015; Denker et al. 2018).”
Evaluation of the relativistic redshift in frequency standards at KRISS
Lee, J., Kwon, J. H., Park, C. Y., Kim, H., Choi, I.-M., Chung, J. W., & Lee, W.-K. (2024) · Metrologia · doi:10.1088/1681-7575/ad1ca9 · Cited by 7
“The relativistic redshift correction for a clock at a point P at rest on the Earth’s surface is approximately given by [15] where f P is the frequency measured at P , ∆ f is its difference from that measured on the zero level surface, ( W P − W 0 ) is the difference in gravity potential between P…”
BackgroundMethodRealizing the European Vertical Reference System using model-based hydrodynamic leveling data
Afrasteh, Y., Slobbe, C., Sacher, M., Verlaan, M., Jahanmard, V., Klees, R., Guarneri, H., Keyzer, L., Pietrzak, J. D., Snellen, M., et al. (2023) · Journal of Geodesy · doi:10.1007/s00190-023-01778-2 · Cited by 4
Time and Frequency Metrology in the Context of Relativistic Geodesy
Bauch, A. (2019) · Fundamental theories of physics · doi:10.1007/978-3-030-11500-5_1 · Cited by 5
Zhang, Z., Zhao, Q., Qichen, Q., Jayjong, N., Lee, M. D. K., Arnold, K. J., & Barrett, M. D. (2025) · Metrologia · doi:10.1088/1681-7575/addc76 · Cited by 5
Tanaka, Y., & Aoki, Y. (2022) · International Association of Geodesy symposia · doi:10.1007/1345_2022_147 · Cited by 3
Development of a Portable Optical Clock
Morris, D. C., Hill, I. R., Hendricks, R., Gaynor, P., Gill, P. R., Williams, R. A., Aldous, M., Gellesch, M., Jones, J. M., Kale, Y. B., et al. (2019) · Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS) · doi:10.1109/fcs.2019.8856051 · Cited by 3
“Distributed timekeeping devices enable enhanced abilities for GNSS [4] and for relativistic geodesy [2], [3].”
BackgroundBagherbandi, M., Shirazian, M., Amin, H., & Horemuz, M. (2023) · Frontiers in Earth Science · doi:10.3389/feart.2023.1139211 · Cited by 2
“Denker et al. (2018) proposed a method to utilize precise levelling benchmarks in France and Germany to validate the performance of the optical fiber link between points in the two countries. This method, due to the error sources mentioned in Denker et al. (2018) such as uncertainties because of utilizing GNSS measure…”
BackgroundMethodInfluentialFedorchuk, A., Dzhuman, B., & Forostyna, M. (2025) · Geodesy and Geodynamics · doi:10.1016/j.geog.2025.04.010 · Cited by 2
Advances in time-frequency based geopotential determination
Sun, H., Shen, W., Gao, K., Gao, Y., Hou, M., Bao, L., Zhang, P., & Shen, Z. (2025) · Geodesy and Geodynamics · doi:10.1016/j.geog.2025.04.002 · Cited by 5
Transportable optical lattice clocks and general relativity
Shinkai, H.-A., Takamoto, M., & Katori, H. (2024) · International Journal of Modern Physics D · doi:10.1142/s0218271825400127 · Cited by 5
Free space optical link to a tethered balloon for frequency transfer and chronometric geodesy
Maron, N. G. J., Fernandez, S., Esnault, F.-X., Lévèque, T., Muzeau, T., & Wolf, P. (2024) · Optics Express · doi:10.1364/oe.511244 · Cited by 3
“In the meantime, ground links between clocks over shorter distances are required, not only as demonstrators for space, but also for field measurement of the local geopotential via the relativistic gravitational redshift of clocks, known as chronometric geodesy [19–21].”
BackgroundOptical Frequency Transfer for Geopotential Difference Measurements via a Flying DronePreprint
Dix-Matthews, B. P., Gozzard, D. R., Walsh, S., et al. (2022) · doi:10.36227/techrxiv.21637715.v1 · Cited by 2
Optical Frequency Transfer for Geopotential Difference Measurements via a Flying DronePreprint
Dix-Matthews, B. P., Gozzard, D. R., Walsh, S., et al. (2022) · doi:10.36227/techrxiv.21637715 · Cited by 2
Xiong, C., Liu, D., Wu, L., Bao, L., & Zhang, P. (2022) · Remote Sensing · doi:10.3390/rs14174141 · Cited by 3
Inventory of Error Sources Limiting GNSS-based Frequency Transfer
Elmaghraby, A., Krawinkel, T., & Schön, S. (2022) · Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS) · doi:10.1109/eftf/ifcs54560.2022.9850608 · Cited by 3
Clock comparison using black holes
Haas, R. (2021) · Nature Physics · doi:10.1038/s41567-020-01071-5 · Cited by 2
Route to a Portable Optical Clock
Aldous, M., Viswam, S., Bass, J., Menchetti, M., Ubaid, Q. H., Jones, J. M., Morris, D. C., Molony, P. K., Gellesch, M., Bongs, K., et al. (2018) · Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS) · doi:10.1109/fcs.2018.8597579 · Cited by 2
“A distributed system of highly-accurate timekeeping systems can be used for relativistic geodesy [2], [3], and to enhance GNSS [4] to name but two.”
BackgroundChapter 1 Theoretical background
(1996) · The Metrical Organization of Beowulf · doi:10.1515/9783110810493.1 · Cited by 2
Lu+ optical frequency references with accuracy verified at the 19th digit
Arnold, K. J., Lee, M. D. K., Zhao, Q., Qin, Q., Zhang, Z., Jayjong, N., & Barrett, M. D. (2026) · Nature · doi:10.1038/s41586-026-11072-8 · Cited by 13
An improved picosecond-level laser time transfer for China’s space station
Geng, R., Wu, Z. W., Huang, Y., Tang, K., Zhang, H., Meng, W., Cheng, Z., Guo, Y., Gao, S., Wang, W., et al. (2026) · Journal of Geodesy · doi:10.1007/s00190-026-02095-0 · Cited by 1
International optical clock comparison using the European optical fiber network
Anonymous, Zyskind, C., Amy‐Klein, A., Benkler, E., Bize, S., Calonico, D., Cantin, E., Chardonnet, C., Clivati, C., Condio, S., et al. (2026) · Physical Review Research · doi:10.1103/l4bh-ryxs · Cited by 8
“The reported uncertainty is the total estimated uncertainty combining the systematic contribution of each clock, the statistical uncertainty and the uncertainty of the relativistic redshift [34, 56], which we note may differ between local and remote ratios.”
Physics-informed neural networks for geoid modeling
Jiang, T., Tu, Z., & Li, J. (2026) · Journal of Geodesy · doi:10.1007/s00190-025-02017-6 · Cited by 7
Absolute frequency measurement of an Al + ion optical clock through a GNSS link to the SI second
Ma, Z., Pang, L., Wang, B., Gong, R., Wei, S., Liu, Y., Gao, Y., Wang, Y., Wang, Z., Liu, H., et al. (2025) · Metrologia · doi:10.1088/1681-7575/adeb8f · Cited by 3
Vision of a Clock-Based Network for Absolute Sea Level Monitoring
Vincent, A., & Müller, J. (2024) · International Association of Geodesy symposia · doi:10.1007/1345_2024_265 · Cited by 1
Detection of time variable gravity signals using terrestrial clock networks
Vincent, A., & Müller, J. (2023) · Advances in Space Research · doi:10.1016/j.asr.2023.07.058 · Cited by 6
Shabanloui, A., Wu, H., & Müller, J. (2023) · International Association of Geodesy symposia · doi:10.1007/1345_2023_220 · Cited by 1
News from the BIPM laboratories—2018
Tavella, P., Judge, S., Stöck, M., Wielgosz, R. I., & Milton, M. J. T. (2019) · Metrologia · doi:10.1088/1681-7575/aafa6e · Cited by 1
“In addition it is exploring the use of frequency standard for applications in geodesy and gravity field determination [26, 27].”
BackgroundUse of Geodesy and Geophysics Measurements to Probe the Gravitational Interaction
Hees, A., Bourgoin, A., Delva, P., Poncin-Lafitte, C. L., & Wolf, P. (2019) · Fundamental theories of physics · doi:10.1007/978-3-030-11500-5_9 · Cited by 2
Zhang, P., Wang, C., & Xu, W. (2026) · iScience · doi:10.1016/j.isci.2026.115869
“12,13 24 The first experiment to test gravitational redshift (GRS), known as gravity probe A (GP-A), was conducted by the National Aeronautics and Space Administration (NASA) in 1976.”
Determining of Geopotential Difference With Multi-GNSS Undifferenced Time–Frequency Signals
Xu, W. S., & Zhang, P. (2026) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2026.3664549
“…optical clocks has reached the order of 10 − 19 , theoretically enabling millimeter-level equivalent height di ff erence measurement accuracy [7], [8], related simulation experiments indicate that when using GNSS and clocks with frequency stability better than 10 − 19 for geopotential di ff…”
Research progress on precision measurement based on optical clocks
Xiaotong, L., Jin, C., & Hong, C. S. (2025) · Acta Physica Sinica · doi:10.7498/aps.75.20251594 · Cited by 1
Revisiting relativistic clock drift in GNSS: from constant model to dynamic model
Wu, S., Liu, Y., Liu, Y., Feng, Y., Zhang, H., Zhou, D., & Tu, Z. (2025) · GPS Solutions · doi:10.1007/s10291-025-02007-3 · Cited by 1
Šprlák, M. (2025) · Surveys in Geophysics · doi:10.1007/s10712-025-09905-8
International System of Units-traceable temperature calibration based on optical lattice clocks
Cao, J., Lu, B., Lu, X., & Chang, H. (2025) · Physical Review Research · doi:10.1103/4xmq-pfyv · Cited by 2
Zhong, L.-J., Li, J., Wu, Q., et al. (2025) · Journal of Computational and Applied Mathematics · doi:10.1016/j.cam.2025.116969
The kinetic relativity theory – hiding in plain sight
Loen, M. V. (2024) · Open Physics · doi:10.1515/phys-2024-0053 · Cited by 1
Sanchez, L. A. (2023) · Encyclopedia of earth sciences series/Encyclopedia of earth sciences · doi:10.1007/978-3-319-02370-0_49-1
Free space optical link to a tethered balloon for frequency transferPreprint
Maron, N. G. J., Fernandez, S., Esnault, F.-X., et al. (2023) · arXiv (Cornell University) · doi:10.48550/arxiv.2401.01899
“In the meantime, ground links between clocks over shorter distances are required, not only as demonstrators for space, but also for field measurement of the local geopotential via the relativistic gravitational redshift of clocks, known as chronometric geodesy [19–21].”
BackgroundTime: Astronomical time - atomic time - redefining second based on constant
Fang, F., ZHANG, A., Lin, Y., & Li, T. (2021) · Zhongguo kexue. Wulixue Lixue Tianwenxue · doi:10.1360/sspma-2020-0492 · Cited by 1
Transportable Optical Lattice Clocks to Test Gravitational Redshift
Katori, H., Ushijima, I., Ohmae, N., & Takamoto, M. (2020) · OSA Quantum 2.0 Conference · doi:10.1364/quantum.2020.qw4a.2
Optical Atomic Clocks: From International Timekeeping to Gravity Potential Measurement
Margolis, H. S., Denker, H., Voigt, C., Timmen, L., Grotti, J., Koller, S., Vogt, S., Häfner, S., Sterr, U., Lisdat, C., et al. (2019) · Conference on Lasers and Electro-Optics · doi:10.1364/cleo_si.2019.sm1f.3
Metadata
- Authors
- Denker, H., Timmen, L., Voigt, C., Weyers, S., Peik, E., Margolis, H. S., Delva, P., Wolf, P., & Petit, G.
- Affiliations
- Leibniz University Hannover (DE)
- Physikalisch-Technische Bundesanstalt (DE)
- National Physical Laboratory (GB)
- Centre National de la Recherche Scientifique (FR)
- Bureau international des poids et mesures (FR)
- Corresponding author
- Denker, Heiner
- ORCID
- Venue
- Journal of Geodesy
- Published
- 2017-12-12
- Volume
- 92
- Issue
- 5
- Pages
- 487-516
- ISSN
- 0949-7714 (ISSN-L)
- 1432-1394
- OpenAlex
- W2773728726
- Cited by
- 91
- References
- 101
- Citations by year
- 2026: 7 · 2025: 13 · 2024: 12 · 2023: 12 · 2022: 7 · 2021: 9 · 2020: 10 · 2019: 13 · 2018: 7 · 2017: 1
- FWCI
- 4.16
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Journal of Geodesy (publishedVersion, cc-by)
- Institutional Repository of Leibniz Universität Hannover (Leibniz Universität Hannover) (submittedVersion, cc-by-nc-nd)
- HAL (submittedVersion, cc-by)
- Publication Database GFZ (GFZ German Research Centre for Geosciences) (submittedVersion)
- Publication Database GFZ (GFZ German Research Centre for Geosciences) (submittedVersion, other-oa)
- Publication Database GFZ (GFZ German Research Centre for Geosciences) (submittedVersion, cc-by)
- Funders
- European Metrology Research Programme (SIB55 ITOC)
- Deutsche Forschungsgemeinschaft (DFG) (SFB 1128)
- Topics
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Advanced Frequency and Time Standards
- Physical Sciences › Earth and Planetary Sciences › Geophysics › Geophysics and Gravity Measurements
- Physical Sciences › Engineering › Aerospace Engineering › GNSS positioning and interference
- Keywords
- relativistic redshift, optical atomic clocks, clock frequency stability, gravitational potential, geometric leveling, clock comparison
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.