Geodetic methods to determine the relativistic redshift at the level of 10 $$^{-18}$$ - 18 in the context of international timescales: a review and practical results
Open accessThe DOI matches its Crossref record; 101 of the 101 references it cites were found in a registry or an index; 10 of the 77 sources its claims cite were checked for support.
Abstract
The frequency stability and uncertainty of the latest generation of optical atomic clocks is approaching the 10^-18 level; the paper reviews levelling and GNSS/geoid approaches for determining gravity potential for relativistic redshift correction.
Overview
CoChat Summary
## TL;DR
The paper reviews how to determine gravity potential for relativistic redshift corrections at the 10^-18 level, focusing on geometric levelling and the GNSS/geoid approach for optical clock sites. Using clock sites in Germany and France, it finds that the two approaches differ at the decimetre level over inter-country distances, while GNSS/geoid is the recommended route for absolute potential values for international timescales.
## Key findings
- A fractional frequency shift of 1 part in 10^-18 corresponds to about 0.1 m^2 s^-2 in gravity potential difference, equivalent to about 0.01 m in height.
- For four optical clock sites (PTB, LUH, MPQ, OBSPARIS), the consistency check between GNSS and levelling heights showed residuals up to 11 mm (PTB), 9 mm (LUH), 2 mm (MPQ), and 5 mm (OBSPARIS) when the quasigeoid was treated as a horizontal plane; against EGG2015 the residuals were up to 6 mm, 1 mm, 2 mm, and 5 mm, respectively.
- Differences between geopotential numbers from geometric levelling and GNSS/geoid ranged from +0.014 to -0.109 gpu, equivalent to +0.014 to -0.111 m; for site pairs the discrepancies were 0.010 m (PTB-LUH, 52 km), 0.032 m (PTB-MPQ, 457 km), 0.042 m (LUH-MPQ, 480 km), and about 0.10 m for OBSPARIS versus the German sites over 650–700 km.
- The paper states that the GNSS/geoid approach gives absolute gravity potential values with present uncertainty of about 2.2 cm in height and about 2 × 10^-18 in relativistic redshift correction; for shorter local comparisons, geometric levelling can reach uncertainties down to a few parts in 10^-19.
## Methods
- Review paper with theory sections on relativistic reference systems, proper vs coordinate time, gravitational redshift, and time/gravity potential relations, plus a practical comparison of geodetic methods.
- Empirical case study at four clock sites: PTB (Braunschweig), LUH (Hannover), MPQ (Garching), and OBSPARIS (Paris), using geometric levelling, GNSS observations, and the EGG2015 quasigeoid model.
- Main analyses included consistency checks between GNSS and levelling heights, conversion to the zero-tide system and EVRF2007/ITRF2008, and comparison of geopotential numbers from the geometric levelling and GNSS/geoid approaches.
## Limitations
- The paper states that the practical results are based on the static part of the gravity field; temporal variations are assumed to be handled separately by reductions.
- It explicitly notes that the quoted GNSS/geoid uncertainty is a best-case scenario, requiring a state-of-the-art satellite model and sufficiently dense, high-quality terrestrial gravity/terrain data within about 50–100 km.
- Evident from the text: the clock-site study covers only four sites and the paper does not report a direct optical-clock measurement campaign here, so conclusions about redshift corrections are geodetically inferred rather than experimentally validated by clocks in this paper.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
6 Valid · 6 Not valid · 51 Not checked · 152 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The frequency stability and uncertainty of the latest generation of optical atomic clocks is now approaching the one part in 10 18 level.”
- Also stated in: § 1 Introduction · boosted
“The optical clocks operate at frequencies about five orders of magnitude higher than the caesium clocks and thus achieve a higher frequency stability, approaching fractional stabilities and uncertainties of one part in 10 18 (Chou et al. 2010;Hinkley et al. 2013;Bloom et al. 2014;Nicholson et al. 2015;Ushijima et al. 2015;Huntemann et al. 2016).”
§ Geodetic methods to determine the relativistic redshift at the level of 10 -18 in the context of international timescales: a review and practical results > Abstract
What the sources say
- Supportedcites Chou et al. 2010 source
The paper reports an Al⁺ optical clock with fractional frequency inaccuracy of 8.6 × 10⁻¹⁸ (p. 1). Its summary reports a comparison uncertainty of 7.0 × 10⁻¹⁸ and stability that improves with averaging time (p. 4), supporting the broad claim that optical-clock uncertainty and stability were approaching the 10⁻¹⁸ level. (LLM, conf=0.87)
- Partly supportedcites Hinkley et al. 2013 sourceExperimental — accuracy not yet measured
The paper reports clock instability of 1.6 parts in 10^18 (p. 4), supporting the stability part of the claim. But it distinguishes instability from systematic uncertainty: on p. 8, it says one clock had been evaluated at 3 parts in 10^16 uncertainty, the other had not yet been evaluated, and 10^17-level uncertainty was anticipated rather than achieved. (LLM, conf=0.90)
- Supportedcites Bloom et al. 2014 source
The Introduction (pp. 2–3) reports a fractional-frequency uncertainty of 6.4×10⁻¹⁸ and instability of 3×10⁻¹⁸ at 10,000 seconds for an optical lattice clock. These measurements support the claim that optical-clock stability and uncertainty were approaching one part in 10¹⁸. (LLM, conf=0.93)
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 1 Introduction · boosted
Every source the paper cites for this claim was checked and supports it.
In the paper
“In this context, geodynamic effects also lead to additional velocity contributions, and the effect of these on time and frequency comparisons has to be considered (see Gersl et al. 2015).”
§ Geodetic methods to determine the relativistic redshift at the level of 10 -18 in the context of international timescales: a review and practical results > 2.4 Time and the gravity potential
What the sources say
- Supportedcites Gersl et al. 2015 source
Section 3 (Time transfer) identifies Earth tides as causing residual velocity and quantifies their contribution to a time-transfer correction. Section 6.3 reports tidal contributions to both time- and frequency-transfer corrections, supporting the claim that geodynamic effects must be considered in comparisons. (LLM, conf=0.92)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“A first attempt in this direction was the comparison of two strontium optical clocks between PTB and OBSPARIS via a fibre link, showing an uncertainty and agreement with the geodetic results of about 5 × 10 -17 (Lisdat et al. 2016).”
§ Geodetic methods to determine the relativistic redshift at the level of 10 -18 in the context of international timescales: a review and practical results > 5 Discussion and conclusions
What the sources say
- Partly supportedcites Lisdat et al. 2016 sourceExperimental — accuracy not yet measured
The Experimental layout and Campaigns results describe the Paris–PTB strontium-clock comparison over a fibre link and report a fractional offset of (4.7 ± 5.0) × 10−17, consistent with agreement between the clocks. The Campaigns results say geodetic measurements supplied a gravity-potential correction; they do not report a separate agreement with geodetic results at 5 × 10−17. No page numbers are available in our copy. (LLM, conf=0.86)
plainstates an associationSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“This was mainly limited by the uncertainty and instability of the participating clocks, which is likely to improve in the near future.”
§ Geodetic methods to determine the relativistic redshift at the level of 10 -18 in the context of international timescales: a review and practical results > 5 Discussion and conclusions
What the sources say
- Supportedcites Lisdat et al. 2016 source
The Results (‘Campaigns to compare the strontium optical clocks’) report that link instability was negligible during the comparison. The Results (‘Optical clock performance’) give the participating clocks’ uncertainties and instabilities, supporting the claim that the clocks were the main limitation. (LLM, conf=0.90)
plainstates a causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“However, the corresponding omission error at these wavelengths is still quite significant with values at the level of several decimetres, e.g.0.94 m for n = 90, 0.42 m for n = 200, and 0.23 m for n = 360.”
§ Geodetic methods to determine the relativistic redshift at the level of 10 -18 in the context of international timescales: a review and practical results > 3.2 The GNSS/geoid approach
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
79 more claims
Create a free account to see all 215 claims and to verify the 3 references still open.
- It may state two separate claims as one. 92
- Probably not a substantial claim. 66
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“it is currently limited less by clock physics than by the practical reach of stable optical frequency links”
From Chapter 1 Theoretical background (1996) · cites this paper as [4]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The chronometrically measured geopotential difference of 3918 . 1(2 . 6) m 2 s -2 agrees with an independent geodetic determination of 3915 . 88(0 . 30) m 2 s -2 .”
From Long-distance chronometric leveling with a portable optical clock (2024) · cites this paper as [23]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The chronometrically measured geopotential difference of 3918 . 1(2 . 6) m 2 s -2 agrees with an independent geodetic determination of 3915 . 88(0 . 30) m 2 s -2 .”
From Long-distance chronometric leveling with a portable optical clock (2024) · cites this paper as [23]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“They showed that the GNSS/geoid approach provides better results than geometric levelling.”
From Time transfer and significance of vertical land motion in relativistic geodesy applications: a review paper (2023) · cites this paper as Denker et al. (2018)
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“This method, due to the error sources mentioned in Denker et al. (2018) such as uncertainties because of utilizing GNSS measurements, sprite leveling, geoid models, etc., is not accurate to millimeter/ submillimeter level.”
From Time transfer and significance of vertical land motion in relativistic geodesy applications: a review paper (2023) · cites this paper as Denker et al. (2018)
Experimental — accuracy not yet measured
17 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Theory and Experiment in Gravitational Physics
Will, C. M. (2018) · doi:10.1017/9781316338612 · Cited by 3,637
Theory and Experiment in Gravitational Physics
Will, C. M. (1993) · doi:10.1017/cbo9780511564246 · Cited by 3,632 · cited 1×
“In textbooks (see, for example, Cheng 2005; Lambourne 2010; Misner et al. 1973; Moritz and Hofmann-Wellenhof 1993; Schutz 2003, 2009; Will 1993) the redshift effect is usually explained by assuming a stationary gravitational field (with time-independent metric) as well as a static emitter and…”
BackgroundThe development and evaluation of the Earth Gravitational Model 2008 (EGM2008)
Pavlis, N. K., Holmes, S. A., Kenyon, S. C., & Factor, J. K. (2012) · Journal of Geophysical Research: Solid Earth · doi:10.1029/2011jb008916 · Cited by 2,641 · cited 6×
“Taking into account the given uncertainty estimates for the global geopotential model coefficients (including the uncertainty contribution of GM, see above) and the terrestrial data (assuming a standard deviation of 1 mGal with correlated noise), and supposing that a least-squares spectral combination of the satellite…”
BackgroundInfluentialLudlow, A. D., Boyd, M. M., Ye, J., Peik, E., & Schmidt, P. O. (2015) · Reviews of Modern Physics · doi:10.1103/revmodphys.87.637 · Cited by 2,385
Self-citationAltamimi, Z., Rebischung, P., Métivier, L., & Collilieux, X. (2016) · Journal of Geophysical Research: Solid Earth · doi:10.1002/2016jb013098 · Cited by 1,427
ITRF2008: an improved solution of the international terrestrial reference frame
Altamimi, Z., Collilieux, X., & Métivier, L. (2011) · Journal of Geodesy · doi:10.1007/s00190-011-0444-4 · Cited by 1,181 · cited 4×
“Ellipsoidal coordinates are given in Table 2 at the epoch 2005.0, the standard reference epoch associated with the ITRF2008 (see Altamimi et al. 2011).”
BackgroundMethodInfluentialHeiskanen, W. A., & Moritz, H. (1967) · Bulletin géodésique · doi:10.1007/bf02525647 · Cited by 1,144
(2014) · Dictionary Geotechnical Engineering/Wörterbuch GeoTechnik · doi:10.1007/978-3-642-41714-6_10674 · Cited by 1,137
An optical lattice clock with accuracy and stability at the 10−18 level
Bloom, B. J., Nicholson, T. L., Williams, J. R., Campbell, S. L., Bishof, M., Zhang, X., Zhang, W., Bromley, S. L., & Ye, J. (2014) · Nature · doi:10.1038/nature12941 · Cited by 1,073
A First Course in General Relativity
Schutz, B. (2022) · Cambridge University Press eBooks · doi:10.1017/9781108610865 · Cited by 944
Frequency Comparison of Two High-Accuracy Al + Optical Clocks
Chou, C., Hume, D., Koelemeij, J., Wineland, D., & Rosenband, T. (2010) · Physical Review Letters · doi:10.1103/physrevlett.104.070802 · Cited by 903 · cited 5×
“The optical clocks operate at frequencies about five orders of magnitude higher than the caesium clocks and thus achieve a higher frequency stability, approaching fractional stabilities and uncertainties of one part in 1018 (Chou et al. 2010; Hinkley et al. 2013; Bloom et al. 2014; Nicholson et al. 2015; Ushijima et a…”
BackgroundInfluentialAn Atomic Clock with 10 –18 Instability
Hinkley, N., Sherman, J. A., Phillips, N. B., Schioppo, M., Lemke, N. D., Beloy, K., Pizzocaro, M., Oates, C. W., & Ludlow, A. D. (2013) · Science · doi:10.1126/science.1240420 · Cited by 817 · cited 1×
“…orders of magnitude higher than the caesium clocks and thus achieve a higher frequency stability, approaching fractional stabilities and uncertainties of one part in 1018 (Chou et al. 2010; Hinkley et al. 2013; Bloom et al. 2014; Nicholson et al. 2015; Ushijima et al. 2015; Huntemann et al. 2016).”
BackgroundSystematic evaluation of an atomic clock at 2 × 10−18 total uncertainty
Nicholson, T. L., Campbell, S. L., Hutson, R. B., Marti, G. E., Bloom, B. J., McNally, R. L., Zhang, W., Barrett, M. D., Safronova, M. S., Strouse, G. F., et al. (2015) · Nature Communications · doi:10.1038/ncomms7896 · Cited by 780
Geodetic Reference System 1980
Moritz, H. (1992) · Bulletin G�od�sique · doi:10.1007/bf00989270 · Cited by 740
Single-Ion Atomic Clock with 3 × 10 − 18 Systematic Uncertainty
Huntemann, N., Sanner, C., Lipphardt, B., Tamm, C., & Peik, E. (2016) · Physical Review Letters · doi:10.1103/physrevlett.116.063001 · Cited by 677 · cited 1×
“…orders of magnitude higher than the caesium clocks and thus achieve a higher frequency stability, approaching fractional stabilities and uncertainties of one part in 1018 (Chou et al. 2010; Hinkley et al. 2013; Bloom et al. 2014; Nicholson et al. 2015; Ushijima et al. 2015; Huntemann et al. 2016).”
BackgroundSelf-citationCryogenic optical lattice clocks
Ushijima, I., Takamoto, M., Das, M., Ohkubo, T., & Katori, H. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.5 · Cited by 627
林, 憲. (1975) · 日本物理學會誌 · Cited by 546
A GUIDE TO USING INTERNATIONAL GNSS SERVICE (IGS) PRODUCTS
Kouba, J. (2003) · Cited by 519
A First Course in General Relativity
Schutz, B. (2009) · doi:10.1017/cbo9780511984181 · Cited by 505
A clock network for geodesy and fundamental science
Lisdat, C., Grosche, G., Quintin, N., Shi, C., Raupach, S. M. F., Grebing, C., Nicolodi, D., Stefani, F., Al-Masoudi, A., Dörscher, S., et al. (2016) · Nature Communications · doi:10.1038/ncomms12443 · Cited by 460
Self-citationGeodetic Reference System 1980
Moritz, H. (2000) · Journal of Geodesy · doi:10.1007/s001900050278 · Cited by 431
Tscherning, C. C. (1982) · Eos, Transactions American Geophysical Union · doi:10.1029/eo063i021p00514-03 · Cited by 427
Soffel, M., Klioner, S. A., Petit, G., Wolf, P., Kopeikin, S. M., Bretagnon, P., Brumberg, V. A., Capitaine, N., Damour, T., Fukushima, T., et al. (2003) · The Astronomical Journal · doi:10.1086/378162 · Cited by 392
Self-citationGravitational Red-Shift in Nuclear Resonance
Pound, R. V., & Rebka, G. A. (1959) · Physical Review Letters · doi:10.1103/physrevlett.3.439 · Cited by 389 · cited 1×
“…and receiver (v = 0), and for better illustration, it is mostly supposed (although not required) that both the emitter and receiver are positioned in the same vertical one above the other, noting that also the famous Pound and Rebka experiment was carried out in this way (Pound and Rebka 1959).”
BackgroundOptical-Frequency Transfer over a Single-Span 1840 km Fiber Link
Droste, S., Ozimek, F., Udem, T., Predehl, K., Hänsch, T. W., Schnatz, H., Grosche, G., & Holzwarth, R. (2013) · Physical Review Letters · doi:10.1103/physrevlett.111.110801 · Cited by 315
Progress in atomic fountains at LNE-SYRTE
Guena, J., Abgrall, M., Rovera, D., Laurent, P., Chupin, B., Lours, M., Santarelli, G., Rosenbusch, P., Tobar, M. E., Li, R., et al. (2012) · IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control · doi:10.1109/tuffc.2012.2208 · Cited by 291
Riehle, F. (2017) · Nature Photonics · doi:10.1038/nphoton.2016.235 · Cited by 264
Torge, W., & Müller, J. (2012) · doi:10.1515/9783110250008 · Cited by 220
First accuracy evaluation of NIST-F2
Heavner, T. P., Donley, E. A., Levi, F., Costanzo, G., Parker, T. E., Shirley, J. H., Ashby, N., Barlow, S., & Jefferts, S. R. (2014) · Metrologia · doi:10.1088/0026-1394/51/3/174 · Cited by 205
Gravity from the Ground Up: An Introductory Guide to Gravity and General Relativity
Schutz, B. (2003) · Cambridge University Press eBooks · doi:10.1017/cbo9780511807800 · Cited by 189
Schutz, B. (2003) · doi:10.1017/cbo9780511807800.010 · Cited by 178
Drewes, H., Kuglitsch, F., Adám, J., & Rózsa, S. (2016) · Journal of Geodesy · doi:10.1007/s00190-016-0948-z · Cited by 174 · cited 6×
“Then, after further improvements in the optical clock performance, conclusive geodetic results can be anticipated in the future, and clock networks may also contribute to the establishment of the International Height Reference System (IHRS).”
BackgroundInfluentialBjerhammar, A. (1985) · Bulletin Géodésique · doi:10.1007/bf02520327 · Cited by 165
EGM_TIM_RL05: An independent geoid with centimeter accuracy purely based on the GOCE mission
Brockmann, J. M., Zehentner, N., Höck, E., Pail, R., Loth, I., Mayer‐Gürr, T., & Schuh, W. (2014) · Geophysical Research Letters · doi:10.1002/2014gl061904 · Cited by 160 · cited 13×
“Taking into account the given uncertainty estimates for the global geopotential model coefficients (including the uncertainty contribution of GM, see above) and the terrestrial data (assuming a standard deviation of 1 mGal with correlated noise), and supposing that a least-squares spectral combination of the satellite…”
MethodInfluentialMisner, C. W., Thorne, K. S., Wheeler, J. A., & Chandrasekhar, S. (1974) · Physics Today · doi:10.1063/1.3128805 · Cited by 154
Height datum definition, height datum connection and the role of the geodetic boundary value problem
Rummel, R., & Teunissen, P. J. G. (1988) · Journal of Geodesy · doi:10.1007/bf02520239 · Cited by 150 · cited 1×
“…denoted here somewhat loosely as the GNSS/geoid approach, which is also known in the literature as the GNSS/GBVP approach (the H. Denker et al. geodetic boundary value problem is the basis for computing the disturbing potential T ; see, for example, Rummel and Teunissen 1988; Heck and Rummel 1990).”
Li, R., Gibble, K., & Szymaniec, K. (2011) · Metrologia · doi:10.1088/0026-1394/48/5/007 · Cited by 138
Accuracy evaluation of ITCsF2: a nitrogen cooled caesium fountain
Levi, F., Calonico, D., Calosso, C. E., Godone, A., Micalizio, S., & Costanzo, G. A. (2014) · Metrologia · doi:10.1088/0026-1394/51/3/270 · Cited by 134 · cited 2×
“…(NPL) in 1955, the accuracy of caesium microwave fre- H. Denker et al. quency standards has improved continuously and the best primary standards now have fractional uncertainties of a few parts in 1016 (Heavner et al. 2014; Levi et al. 2014; Guena et al. 2012; Weyers et al. 2012; Li et al. 2011).”
BackgroundGiacomo, P. (1981) · Metrologia · doi:10.1088/0026-1394/17/2/007 · Cited by 132
Surveying principles and applications
Kavanagh, B. F., & Bird, S. J. G. (1984) · Cited by 116
Relativity, gravitation and cosmology: a basic introduction
Cheng, T.-P. (2010) · CERN Document Server (European Organization for Nuclear Research) · doi:10.1093/acprof:oso/9780199573639.001.0001 · Cited by 116
Strategies for Solving the Vertical Datum Problem Using Terrestrial and Satellite Geodetic Data
Heck, B., & Rummel, R. (1990) · International Association of Geodesy symposia · doi:10.1007/978-1-4684-7098-7_14 · Cited by 111 · cited 1×
“…denoted here somewhat loosely as the GNSS/geoid approach, which is also known in the literature as the GNSS/GBVP approach (the H. Denker et al. geodetic boundary value problem is the basis for computing the disturbing potential T ; see, for example, Rummel and Teunissen 1988; Heck and Rummel 1990).”
A conventional value for the geoid reference potential $$W_{0}$$ W 0
Sánchez, L., Čunderlík, R., Dayoub, N., Mikula, K., Minarechová, Z., Šíma, Z., Vatrt, V., & Vojtíšková, M. (2016) · Journal of Geodesy · doi:10.1007/s00190-016-0913-x · Cited by 98
Development of a strontium optical lattice clock for the SOC mission on the ISS
Bongs, K., Singh, Y., Smith, L., He, W., Kock, O., Świerad, D., Hughes, J., Schiller, S., Alighanbari, S., Origlia, S., et al. (2015) · Comptes Rendus. Physique · doi:10.1016/j.crhy.2015.03.009 · Cited by 94 · cited 1×
“…installation of optical master clocks in space, where spatial and temporal variations of the Earth’s gravitational field are smoothed out, such that the space clocks could serve as a reference for ground-based optical clock networks (e.g. Gill et al. 2008; Bongs et al. 2015; Schuldt et al. 2016).”
BackgroundSpecifications for reference frame fixing in the analysis of a EUREF GPS campaign
Boucher, C., & Altamimi, Z. (1998) · Cited by 91
Kaplan, G. H. (2005) · doi:10.21236/ada434096 · Cited by 90
Surveying: Theory and Practice
Anderson, J. M., & Mikhail, E. M. (2012) · Cited by 89
Regional Gravity Field Modeling: Theory and Practical Results
Denker, H. (2013) · Sciences of Geodesy - II · doi:10.1007/978-3-642-28000-9_5 · Cited by 85
Giacomo, P. D. (1980) · Metrologia · doi:10.1088/0026-1394/16/1/008 · Cited by 84
Kahmen, H., & Faig, W. (1988) · De Gruyter eBooks · doi:10.1515/9783110845716 · Cited by 83
Müller, J., Soffel, M., & Klioner, S. A. (2008) · Journal of Geodesy · doi:10.1007/s00190-007-0168-7 · Cited by 82 · cited 2×
“Further refinements of a relativistic geoid definition are discussed, for example, in Soffel et al. (1988), Kopeikin (1991), or Müller et al. (2008), where additional terms at the few mm level show up, but the option for a transformation between the different relativistic definitions and the…”
BackgroundDistributed cavity phase frequency shifts of the caesium fountain PTB-CSF2
Weyers, S., Gerginov, V, Nemitz, N., Li, R., & Gibble, K. (2012) · Metrologia · doi:10.1088/0026-1394/49/1/012 · Cited by 80
Relativity, gravitation, and cosmology: a basic introduction
Cheng, T.-P. (2005) · Choice Reviews Online · doi:10.5860/choice.43-0374 · Cited by 77
Relativistic theory for time comparisons: a review
Petit, G., & Wolf, P. (2005) · Metrologia · doi:10.1088/0026-1394/42/3/s14 · Cited by 77
Smith, D. A., Holmes, S. A., Li, X., Guillaume, S., Wang, Y. M., Bürki, B., Roman, D. R., & Damiani, T. M. (2013) · Journal of Geodesy · doi:10.1007/s00190-013-0653-0 · Cited by 67
(2014) · Cited by 61
Atomic time-keeping from 1955 to the present
Guinot, B., & Arias, E. F. (2005) · Metrologia · doi:10.1088/0026-1394/42/3/s04 · Cited by 60 · cited 2×
“More information on time metrology, the general relativity framework, and international timescales (especially TAI) is given in the review papers by Guinot (2011), Guinot and Arias (2005), Arias (2005), and Petit et al. (2014).”
BackgroundThe problem of clock synchronization: A relativistic approach
Klioner, S. A. (1992) · Celestial Mechanics and Dynamical Astronomy · doi:10.1007/bf00049363 · Cited by 59 · cited 1×
“…the notion of simultaneity is not defined a priori in relativity, and thus, a conventional choice has to be made, which is usually done by considering two events in some (spacetime) reference system as simultaneous if they have equal values of coordinate time in that system (e.g. Klioner 1992).”
BackgroundThe relativistic redshift with 3 10 17uncertainty at NIST, Boulder, Colorado, USA
Pavlis, N. K., & Weiss, M. A. (2003) · Metrologia · doi:10.1088/0026-1394/40/2/311 · Cited by 57 · cited 10×
“As all existing primary frequency standards are situated above the zero level surface, in practice, the relativistic redshift correction is always negative and can become quite significant; for example, Pavlis andWeiss (2003, 2017) estimated a correction f/ f of about −1800 × 10−16 for the clocks at NIST in Boulder, C…”
InfluentialRelativistic time transfer in the vicinity of the Earth and in the solar system
Nelson, R. A. (2011) · Metrologia · doi:10.1088/0026-1394/48/4/s07 · Cited by 56 · cited 1×
“(6), see, for example, Nelson (2011).”
News from the International Bureau of Weights and Measures
Terrien, J. (1968) · Metrologia · doi:10.1088/0026-1394/4/1/006 · Cited by 53 · cited 1×
“The unit of time is the SI second, which is based on the value of the caesium ground-state hyperfine transition frequency, as adopted by the 13th Conférence Générale de Poids et Mesures (CGPM) in 1967 (Terrien 1968).”
MethodModelling the fine-structure of the geoid: Methods, data requirements and some results
Forsberg, R. (1993) · Surveys in Geophysics · doi:10.1007/bf00690568 · Cited by 51 · cited 1×
“…gravity data should have a spacing of roughly 2–4 km, while the uncertainty demands are only at the level of about 1 mGal, presupposing that this is purely random noise without systematic errors over large regions, with similar data requirements being reported by Forsberg (1993) and Jekeli (2012).”
MethodVoigt, C., Denker, H., & Timmen, L. (2016) · Metrologia · doi:10.1088/0026-1394/53/6/1365 · Cited by 50 · cited 2×
“(3); for a discussion of the relevant terms and magnitudes, see, for example, Wolf and Petit (1995), Petit et al. (2014) and Voigt et al. (2016).”
BackgroundSelf-citationThe Permanent Tide In Height Systems
Mäkinen, J., & Ihde, J. (2008) · International Association of Geodesy symposia · doi:10.1007/978-3-540-85426-5_10 · Cited by 49
Geoidal Geopotential and World Height System
Burša, M., Kouba, J., Kumar, M., Müller, A., Raděj, K., True, S. A., Vatrt, V., & Vojtíšková, M. (1999) · Studia Geophysica et Geodaetica · doi:10.1023/a:1023273416512 · Cited by 48
(1995) · Cited by 47
Soffel, M. H., & Langhans, R. (2012) · Astronomy and astrophysics library · doi:10.1007/978-3-642-30226-8 · Cited by 47 · cited 2×
“where N (i) is the geoid undulation, and ζ (i) is the quasigeoid height or height anomaly; for further details on the geoid and quasigeoid (height anomalies) see, for example, Torge and Müller (2012). Equation (16) neglects the fact that strictly the relevant quantities are measured along slightly different lines in s…”
BackgroundRelativity, Gravitation and Cosmology: A Basic Introduction.
Hamilton, A. J. S. (2005) · American Journal of Physics · doi:10.1119/1.2034526 · Cited by 44
Optical frequency standards and clocks
Margolis, H. S. (2010) · Contemporary Physics · doi:10.1080/00107510903257616 · Cited by 41 · cited 1×
“Reviews of optical frequency standards and clocks are given in Ludlow et al. (2015) and Margolis (2010).”
BackgroundA gravimetric geoid model as a vertical datum in canada
Veronneau, M., Duval, R., & Huang, J. (2019) · Geomatica · Cited by 40
Relativistic corrections for time and frequency transfer in optical fibres
Geršl, J., Delva, P., & Wolf, P. (2015) · Metrologia · doi:10.1088/0026-1394/52/4/552 · Cited by 40
Self-citationRelativistic manifestations of gravitational fields in gravimetry and geodesy
Kopejkin, S. M. (1991) · manuscripta geodaetica · doi:10.1007/bf03655420 · Cited by 40 · cited 2×
“Further refinements of a relativistic geoid definition are discussed, for example, in Soffel et al. (1988), Kopeikin (1991), or Müller et al. (2008), where additional terms at the few mm level show up, but the option for a transformation between the different relativistic definitions and the…”
BackgroundAtomic clocks: new prospects in metrology and geodesy
Delva, P., & Lodewyck, J. (2013) · arXiv · doi:10.48550/arxiv.1308.6766 · Cited by 40
Self-citationNews from the International Bureau of Weights and Measures
Terrien, J. (1967) · Metrologia · doi:10.1088/0026-1394/3/1/005 · Cited by 38
Arias, E. F. (2005) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1633 · Cited by 35 · cited 8×
“org/ en/publications/mises-en-pratique/; BIPM—Bureau International des Poids etMesures) as well as in the review papers from Guinot (2011), Arias (2005), and Guinot and Arias (2005).”
BackgroundMethodInfluentialMargolis, H. (2014) · Nature Physics · doi:10.1038/nphys2834 · Cited by 33 · cited 1×
“…of additional gravity measurements carried out recently around all major European optical clock sites within the ITOC project (Margolis et al. 2013;Margolis 2014; see also http://projects. npl.co.uk/itoc/) and the use of a newer geopotential model based on the GOCE satellite mission instead of…”
MethodSelf-citationVII Hotine-Marussi Symposium on Mathematical Geodesy
Sneeuw, N., Sansò, F., Crespi, M., et al. (2012) · International Association of Geodesy symposia · doi:10.1007/978-3-642-22078-4 · Cited by 31
Potential Theory and the Static Gravity Field of the Earth
Jekeli, C. (2015) · Elsevier eBooks · doi:10.1016/b978-0-444-53802-4.00056-7 · Cited by 31 · cited 1×
“In this context, it should be noted that all potentials are defined here with a positive sign, which is consistent with geodetic practice, but in contrast to most physics literature, where usually the opposite sign (conceptually closer to potential energy) is employed (Jekeli 2009).”
ResultBureau International des Poids et Mesures, Sèvres
(2010) · Böhlau Verlag eBooks · doi:10.7788/boehlau.9783412212681.339 · Cited by 27
News from the Bureau International des Poids et Mesures
Terrien, J. (1965) · Metrologia · doi:10.1088/0026-1394/1/3/006 · Cited by 26
Moritz, H., & Hofmann-Wellenhof, B. (1993) · Cited by 25
Computation of the relativistic rate shift of a frequency standard
Petit, G., & Wolf, P. (1997) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/19.571812 · Cited by 23
News from the Bureau International des Poids et Mesures
Terrien, J. (1972) · Metrologia · doi:10.1088/0026-1394/8/1/006 · Cited by 23
Gravitational redshift at INRIM
Calonico, D., Cina, A., Bendea, I. H., Levi, F., Lorini, L., & Godone, A. (2007) · Metrologia · doi:10.1088/0026-1394/44/5/n03 · Cited by 22
Geodetic aspects concerning possible subsidence in southeastern England
Kelsey, J., & Gray, D. A. (1972) · Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences · doi:10.1098/rsta.1972.0040 · Cited by 20 · cited 1×
“…differences between the second and third geodetic levelling in Great Britain (about 0.2 m in the north– south direction over about 1000 km distance; Kelsey 1972), corresponding differences between an old and new levelling in France (about 0.25 m from the Mediterranean Sea to the North Sea, also…”
BackgroundInfluentialRelativistic theory of gravimetric measurements and definition of the geoid
Soffel, M., Herold, H., Ruder, H., & Schneider, M. (1988) · manuscripta geodaetica · doi:10.1007/bf03655241 · Cited by 20 · cited 1×
“Further refinements of a relativistic geoid definition are discussed, for example, in Soffel et al. (1988), Kopeikin (1991), or Müller et al. (2008), where additional terms at the few mm level show up, but the option for a transformation between the different relativistic definitions and the…”
A re-evaluation of the relativistic redshift on frequency standards at NIST, Boulder, Colorado, USA
Pavlis, N. K., & Weiss, M. A. (2017) · Metrologia · doi:10.1088/1681-7575/aa765c · Cited by 19
Units of relativistic time scales and associated quantities
Klioner, S. A., Capitaine, N., Folkner, W. M., Guinot, B. R., Huang, T.-Y., Kopeikin, S. M., Pitjeva, E. V., Seidelmann, P. K., & Soffel, M. H. (2009) · Proceedings of the International Astronomical Union · doi:10.1017/s1743921309990184 · Cited by 18 · cited 1×
“Usually, the graduation unit of coordinate time is also named the “second” due to the mathematical link to the SI second as a unit of proper time, but some authors consider relativistic coordinates as dimensionless; for a recent discussion of this topic, see Klioner et al. (2010).”
BackgroundRelativity, gravitation and cosmology
Lambourne, R. (2010) · Cited by 16
Atomic time, clocks, and clock comparisons in relativistic spacetime: a review
Petit, G., Wolf, P., & Delva, P. (2014) · Applications and Experiments · doi:10.1515/9783110345667.249 · Cited by 16
Self-citationInternational timescales with optical clocks (ITOC)
Margolis, H. S., Godun, R. M., Gill, P., Johnson, L. A. M., Shemar, S. L., Whibberley, P. B., Calonico, D., Levi, F., Lorini, L., Pizzocaro, M., et al. (2013) · 2013 Joint European Frequency and Time Forum & International Frequency Control Symposium (EFTF/IFC) · doi:10.1109/eftf-ifc.2013.6702183 · Cited by 15
Self-citationOn Estimating the Dynamic Ocean Topography – A Profile Approach
Bosch, W., & Savcenko, R. (2010) · International Association of Geodesy Symposia · doi:10.1007/978-3-642-10634-7_34 · Cited by 14 · cited 1×
“…deviation ofMSL from a best fitting equipotential surface (geoid) is denoted as the (mean) dynamic ocean topography (DOT); it reaches maximum values of about ±2 m (Bosch and Savcenko 2010) and is of vital importance for oceanographers for deriving ocean circulation models (Condi and Wunsch 2004).”
BackgroundHigh-Performance Optical Frequency References for Space
Schuldt, T., Döringshoff, K., Milke, A., Sanjuán, J., Gohlke, M., Kovalchuk, E. V., Gürlebeck, N., Peters, A., & Braxmaier, C. (2016) · Journal of Physics Conference Series · doi:10.1088/1742-6596/723/1/012047 · Cited by 13 · cited 1×
“…installation of optical master clocks in space, where spatial and temporal variations of the Earth’s gravitational field are smoothed out, such that the space clocks could serve as a reference for ground-based optical clock networks (e.g. Gill et al. 2008; Bongs et al. 2015; Schuldt et al. 2016).”
BackgroundAccuracy Assessment of the ITRS 2008 Realization of DGFI: DTRF2008
Seitz, M., Angermann, D., & Drewes, H. (2013) · International Association of Geodesy Symposia · doi:10.1007/978-3-642-32998-2_15 · Cited by 12 · cited 1×
“For instance, the station coordinates provided by the International GNSS Service (IGS) or the IERS (e.g. ITRF2008) reach vertical accuracies of about 5–10 mm (cf. Altamimi et al. 2011, 2016, or Seitz et al. 2013).”
MethodEarth scale below a part per billion from Satellite Laser Ranging
Smith, D. E., Kolenkiewicz, R., Dunn, P. J., & Torrence, M. H. (2000) · International Association of Geodesy Symposia · doi:10.1007/978-3-642-59742-8_1 · Cited by 10
Tscherning, C. C. (1984) · Bulletin Géodésique · doi:10.1007/bf02518995 · Cited by 6
Time scales in the context of general relativity
Guinot, B. (2011) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2011.0182 · Cited by 4 · cited 2×
“More information on time metrology, the general relativity framework, and international timescales (especially TAI) is given in the review papers by Guinot (2011), Guinot and Arias (2005), Arias (2005), and Petit et al. (2014).”
BackgroundGravity Field Variability, the Geoid, and Ocean Dynamics
Condi, F., & Wunsch, C. I. (2004) · International Association of Geodesy symposia · doi:10.1007/978-3-662-10735-5_38 · Cited by 4
Wolf, P. (2001) · Cited by 1
Computation of the relativistic frequency shift of a frequency standard
Petit, G., & Wolf, P. (n.d.) · Proceedings of 20th Biennial Conference on Precision Electromagnetic Measurements · doi:10.1109/cpem.1996.546763
Self-citation
Research works printed but not linked: 5
- Ihde J, Barzaghi R, Marti U, Sánchez L, Sideris M, Drewes H, Foerste C, Gruber T, Liebsch G, Pail R (2015) Report of the Ad-hoc Group on an International Height Reference System (IHRS). In: Drewes H, Hornik H (eds) IAG Travaux, vol 39, pp 549–557, Reports 2011–2015
- Rebischung P, Duquenne H, Duquenne F (2008) The new French zero-order levelling network—first global results and possible consequences for UELN. EUREF 2008 symposium, Brussels, Belgium, 18–21 June 2008
- Ries JC (2014) The scale of the terrestrial reference frame from VLBI and SLR. IERS unified analysis workshop, Pasadena, CA, 27–28 June 2014. https://www.iers.org/SharedDocs/Publikationen/EN/IERS/Workshops/UAW2014/Ries_RefFrame.pdf?__blob=publicationFile&v=2
- Sacher M, Ihde J, Liebsch G, Mäkinen J (2008) EVRF2007 as realization of the European Vertical Reference System. In: EUREF symposium, Brussels, Belgium, 18–21 June 2008
- Smith D, Véronneau M, Roman D, Huang JL, Wang YM, Sideris M (2010) Towards the unification of the vertical datums over the North American continent. In: IAG Commission 1 Symposium 2010, Reference Frames for Applications in Geosciences (REFAG2010), Marne-La-Vallée, France, 4–8 Oct 2010
Cited by
Atomic clock performance enabling geodesy below the centimetre level
McGrew, W. F., Zhang, X., Fasano, R. J., Schäffer, S. A., Beloy, K., Nicolodi, D., Brown, R. C., Hinkley, N., Milani, G., Schioppo, M., et al. (2018) · Nature · doi:10.1038/s41586-018-0738-2 · Cited by 727
(2019) · doi:10.1103/physrevlett.123.033201 · Cited by 711
Test of general relativity by a pair of transportable optical lattice clocks
Takamoto, M., Ushijima, I., Ohmae, N., Yahagi, T., Kokado, K., Shinkai, H., & Katori, H. (2020) · Nature Photonics · doi:10.1038/s41566-020-0619-8 · Cited by 507
Geodesy and metrology with a transportable optical clock
Grotti, J., Koller, S., Vogt, S., Häfner, S., Sterr, U., Lisdat, C., Denker, H., Voigt, C., Timmen, L., Rolland, A., et al. (2018) · Nature Physics · doi:10.1038/s41567-017-0042-3 · Cited by 495
Self-citationMehlstäubler, T. E., Grosche, G., Lisdat, C., Schmidt, P. O., & Denker, H. (2018) · Reports on Progress in Physics · doi:10.1088/1361-6633/aab409 · Cited by 263
“Based on the law of error propagation, the uncertainty (standard deviation) for a regionally computed height anomaly ζ, based on the combination of a global geopotential model with terrestrial data, is about 2 cm (Denker et al. 2017); this estimate represents an optimistic scenario and it is only valid for the case th…”
InfluentialSelf-citation
Metadata
- Authors
- Denker, H., Timmen, L., Voigt, C., Weyers, S., Peik, E., Margolis, H. S., Delva, P., Wolf, P., & Petit, G.
- Affiliations
- Leibniz University Hannover (DE)
- Physikalisch-Technische Bundesanstalt (DE)
- National Physical Laboratory (GB)
- Centre National de la Recherche Scientifique (FR)
- Bureau international des poids et mesures (FR)
- Corresponding author
- Denker, Heiner
- ORCID
- Venue
- Journal of Geodesy
- Published
- 2017-12-12
- Volume
- 92
- Issue
- 5
- Pages
- 487-516
- ISSN
- 0949-7714 (ISSN-L)
- 1432-1394
- OpenAlex
- W2773728726
- Cited by
- 91
- References
- 101
- Citations by year
- 2026: 7 · 2025: 13 · 2024: 12 · 2023: 12 · 2022: 7 · 2021: 9 · 2020: 10 · 2019: 13 · 2018: 7 · 2017: 1
- FWCI
- 4.16
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Journal of Geodesy (publishedVersion, cc-by)
- Institutional Repository of Leibniz Universität Hannover (Leibniz Universität Hannover) (submittedVersion, cc-by-nc-nd)
- HAL (submittedVersion, cc-by)
- Publication Database GFZ (GFZ German Research Centre for Geosciences) (submittedVersion)
- Publication Database GFZ (GFZ German Research Centre for Geosciences) (submittedVersion, other-oa)
- Publication Database GFZ (GFZ German Research Centre for Geosciences) (submittedVersion, cc-by)
- Funders
- European Metrology Research Programme (SIB55 ITOC)
- Deutsche Forschungsgemeinschaft (DFG) (SFB 1128)
- Topics
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Advanced Frequency and Time Standards
- Physical Sciences › Earth and Planetary Sciences › Geophysics › Geophysics and Gravity Measurements
- Physical Sciences › Engineering › Aerospace Engineering › GNSS positioning and interference
- Keywords
- relativistic redshift, optical atomic clocks, clock frequency stability, gravitational potential, geometric leveling, clock comparison
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.