The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
Three-dimensional plotted scaffolds with controlled pore size gradients: Effect of scaffold geometry on mechanical performance and cell seeding efficiency
Open accessAbstract
Scaffolds produced by rapid prototyping (RP) techniques have proved their value for tissue engineering applications, due to their ability to produce predetermined forms and structures featuring fully interconnected pore architectures. Nevertheless, low cell seeding efficiency and non-uniform distribution of cells remain major limitations when using such types of scaffold. This can be mainly attributed to the inadequate pore architecture of scaffolds produced by RP and the limited efficiency of cell seeding techniques normally adopted. In this study we aimed at producing scaffolds with pore size gradients to enhance cell seeding efficiency and control the spatial organization of cells within the scaffold. Scaffolds based on blends of starch with poly(ε-caprolactone) featuring both homogeneously spaced pores (based on pore sizes of 0.75 and 0.1 mm) and pore size gradients (based on pore sizes of 0.1-0.75-0.1 and 0.75-0.1-0.75 mm) were designed and produced by three-dimensional plotting. The mechanical performance of the scaffolds was characterized using dynamic mechanical analysis (DMA) and conventional compression testing under wet conditions and subsequently characterized using scanning electron microscopy and micro-computed tomography. Osteoblast-like cells were seeded onto such scaffolds to investigate cell seeding efficiency and the ability to control the zonal distribution of cells upon seeding. Scaffolds featuring continuous pore size gradients were originally produced. These scaffolds were shown to have intermediate mechanical and morphological properties compared with homogenous pore size scaffolds. The pore size gradient scaffolds improved seeding efficiency from ∼35% in homogeneous scaffolds to ∼70% under static culture conditions. Fluorescence images of cross-sections of the scaffolds revealed that scaffolds with pore size gradients induce a more homogeneous distribution of cells within the scaffold.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
The Biomedical Engineering Handbook
Bronzino, J. D., & Peterson, D. R. (2018) · CRC Press eBooks · doi:10.1201/b18423 · Cited by 1,599
Effects of synthetic micro- and nano-structured surfaces on cell behavior
Flemming, R. G., Murphy, C. J., Abrams, G. A., Goodman, S. L., & Nealey, P. F. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00209-9 · Cited by 1,450
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Hutmacher, D. W., Sittinger, M., & Risbud, M. V. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.05.005 · Cited by 1,121
Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,076
Three-Dimensional Cell Culture Matrices: State of the Art
Lee, J., Cuddihy, M. J., & Kotov, N. A. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/teb.2007.0150 · Cited by 1,047
Rapid prototyping in tissue engineering: challenges and potential
Yeong, W.-Y., Chua, C.-K., Leong, K.-F., & Chandrasekaran, M. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2004.10.004 · Cited by 807
Oh, S. H., Park, I. K., Kim, J. M., & Lee, J. H. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.11.024 · Cited by 713
Landers, R., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00139-4 · Cited by 624
Woodfield, T. B. F., Malda, J., de Wijn, J., Péters, F., Riesle, J., & van Blitterswijk, C. A. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.056 · Cited by 618
Carrier, R. L., Papadaki, M., Rupnick, M., Schoen, F. J., Bursac, N., Langer, R., Freed, L. E., & Vunjak-Novakovic, G. (1999) · Biotechnology and Bioengineering · doi:10.1002/(sici)1097-0290(19990905)64:5<580::aid-bit8>3.0.co;2-x · Cited by 540
Li, W., Danielson, K. G., Alexander, P. G., & Tuan, R. S. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10101 · Cited by 536
Moroni, L., de Wijn, J. R., & van Blitterswijk, C. A. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.023 · Cited by 534
Holy, C. E., Shoichet, M. S., & Davies, J. E. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(20000905)51:3<376::aid-jbm11>3.0.co;2-g · Cited by 450
Wendt, D., Marsano, A., Jakob, M., Heberer, M., & Martin, I. (2003) · Biotechnology and Bioengineering · doi:10.1002/bit.10759 · Cited by 449
Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0158 · Cited by 410
Mano, J. F., Koniarova, D., & Reis, R. L. (2003) · Journal of Materials Science: Materials in Medicine · doi:10.1023/a:1022015712170 · Cited by 395
Self-citationBone ingrowth in porous titanium implants produced by 3D fiber deposition
Li, J. P., Habibovic, P., van den Doel, M., Wilson, C. E., de Wijn, J. R., van Blitterswijk, C. A., & de Groot, K. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.02.020 · Cited by 393
Starch-based biodegradable hydrogels with potential biomedical applications as drug delivery systems
Elvira, C., Mano, J. F., San Román, J., & Reis, R. L. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00322-2 · Cited by 357
Self-citationLiu, X., Lim, J. Y., Donahue, H. J., Dhurjati, R., Mastro, A. M., & Vogler, E. A. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.06.016 · Cited by 321
Microfabrication and microfluidics for tissue engineering: state of the art and future opportunities
Andersson, H., & Berg, A. V. D. (2004) · Lab on a Chip · doi:10.1039/b314469k · Cited by 307
Cellular behavior on TiO2 nanonodular structures in a micro-to-nanoscale hierarchy model
Kubo, K., Tsukimura, N., Iwasa, F., Ueno, T., Saruwatari, L., Aita, H., Chiou, W.-A., & Ogawa, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.06.021 · Cited by 305
Micro- and nanoscale structures for tissue engineering constructs
Desai, T. A. (2000) · Medical Engineering & Physics · doi:10.1016/s1350-4533(00)00087-4 · Cited by 302
Pfister, A., Landers, R., Laib, A., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.10807 · Cited by 284
Woodfield, T. B. F., Blitterswijk, C. A. V., Wijn, J. D., Sims, T. J., Hollander, A. P., & Riesle, J. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1297 · Cited by 275
Kim, B.-S., Putnam, A. J., Kulik, T. J., & Mooney, D. J. (1998) · Biotechnology and Bioengineering · doi:10.1002/(sici)1097-0290(19980105)57:1<46::aid-bit6>3.0.co;2-v · Cited by 272
Landers, R., & Mülhaupt, R. (2000) · Macromolecular Materials and Engineering · doi:10.1002/1439-2054(20001001)282:1<17::aid-mame17>3.0.co;2-8 · Cited by 261
Hutmacher, D. W., & Cool, S. (2007) · Journal of Cellular and Molecular Medicine · doi:10.1111/j.1582-4934.2007.00078.x · Cited by 256
The effect of PEGT/PBT scaffold architecture on the composition of tissue engineered cartilage
Malda, J., Woodfield, T. B. F., van der Vloodt, F., Wilson, C., Martens, D. E., Tramper, J., van Blitterswijk, C. A., & Riesle, J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.046 · Cited by 234
Silva, M. M. C. G., Cyster, L. A., Barry, J. J. A., Yang, X. B., Oreffo, R. O. C., Grant, D. M., Scotchford, C. A., Howdle, S. M., Shakesheff, K. M., & Rose, F. R. A. J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.08.010 · Cited by 222
Hierarchical starch-based fibrous scaffold for bone tissue engineering applications
Martins, A., Chung, S., Pedro, A. J., Sousa, R. A., Marques, A. P., Reis, R. L., & Neves, N. M. (2009) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.132 · Cited by 208
Self-citation3D Fiber‐Deposited Electrospun Integrated Scaffolds Enhance Cartilage Tissue Formation
Moroni, L., Schotel, R., Hamann, D., de Wijn, J. R., & van Blitterswijk, C. A. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200601158 · Cited by 205
The Biomedical Engineering Handbook: Second Edition.
Kun, L. (1999) · Electrical Engineering Handbook · doi:10.1201/9781420049510.sec18 · Cited by 198
Kim, G., Son, J., Park, S., & Kim, W. (2008) · Macromolecular Rapid Communications · doi:10.1002/marc.200800277 · Cited by 172
Miot, S., Woodfield, T., Daniels, A. U., Suetterlin, R., Peterschmitt, I., Heberer, M., van Blitterswijk, C. A., Riesle, J., & Martin, I. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.06.048 · Cited by 169
Espigares, I., Elvira, C., Mano, J. F., Vázquez, B., San Román, J., & Reis, R. L. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00315-5 · Cited by 162
Self-citationGomes, M. E., Azevedo, H. S., Moreira, A. R., Ellä, V., Kellomäki, M., & Reis, R. L. (2008) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.89 · Cited by 161
Self-citationEffect of Scaffold Design on Bone Morphology In Vitro
Uebersax, L., Hagenmüller, H., Hofmann, S., Gruenblatt, E., Müller, R., Vunjak‐Novakovic, G., Kaplan, D. L., Merkle, H. P., & Meinel, L. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.3417 · Cited by 151
Fabricating tubular scaffolds with a radial pore size gradient by a spinning technique
Harley, B. A. C., Hastings, A. Z., Yannas, I. V., & Sannino, A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.012 · Cited by 146
3D polycaprolactone scaffolds with controlled pore structure using a rapid prototyping system
Park, S., Kim, G., Jeon, Y. C., Koh, Y., & Kim, W. D. (2008) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-008-3573-4 · Cited by 114
3D Plotted PCL Scaffolds for Stem Cell Based Bone Tissue Engineering
Huri, P. Y., Sousa, R. A., Reis, R. L., Hasırcı, N., & Hasırcı, V. (2008) · Macromolecular Symposia · doi:10.1002/masy.200850911 · Cited by 113
Self-citationFibroblast anchorage to microtextured surfaces
Meyle, J., Gültig, K., Wolburg, H., & von Recum, A. F. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820271212 · Cited by 104
Simple methods to fabricate Bioglass®-derived glass–ceramic scaffolds exhibiting porosity gradient
Bretcanu, O., Samaille, C., & Boccaccini, A. R. (2008) · Journal of Materials Science · doi:10.1007/s10853-008-2536-y · Cited by 86
Porosity and mechanical properties relationship in PCL porous scaffolds.
Guarino, V., Causa, F., & Ambrosio, L. (2012) · PubMed · Cited by 74
Ghosh, S., Gutierrez, V., Fernández, C., Rodríguez‐Pérez, M. Á., Viana, J. C., Reis, R. L., & Mano, J. F. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.02.001 · Cited by 72
Self-citationDetsch, R., Uhl, F. E., Deisinger, U., & Ziegler, G. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-007-3297-x · Cited by 71
Static and dynamic fibroblast seeding and cultivation in porous PEO/PBT scaffolds
Xiao, Y., Riesle, J., & van Blitterswijk, C. (1999) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1008946832443 · Cited by 69
Marques, A. P., Reis, R. L., & Hunt, J. A. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500010 · Cited by 59
Self-citationMano, J. F., Vaz, C. M., Mendes, S. C., et al. (1999) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1008916901009 · Cited by 56
Self-citationCharacterization of starch/poly(ε-caprolactone) hybrid foams
Preechawong, D., Peesan, M., Supaphol, P., & Rujiravanit, R. (2004) · Polymer Testing · doi:10.1016/j.polymertesting.2004.01.011 · Cited by 53
A Broadband Viscoelastic Spectroscopic Study of Bovine Bone: Implications for Fluid Flow
Buechner, P. M., Lakes, R. S., Swan, C. C., & Brand, R. A. (2001) · Annals of Biomedical Engineering · doi:10.1114/1.1385813 · Cited by 46
Marcotte, L., & Tabrizian, M. (2008) · IRBM · doi:10.1016/j.rbmret.2007.11.019 · Cited by 43
Design and Fabrication of 3D Porous Scaffolds to Facilitate Cell-Based Gene Therapy
El‐Ayoubi, R., Eliopoulos, N., DiRaddo, R. W., Galipeau, J., & Yousefi, A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.tea.2006.0418 · Cited by 41
Design and fabrication of 3D‐plotted polymeric scaffolds in functional tissue engineering
Yousefi, A., Gauvin, C., Sun, L. Y., DiRaddo, R. W., & Fernandes, J. (2007) · Polymer Engineering and Science · doi:10.1002/pen.20732 · Cited by 39
Marques, A. P., Cardoso-Cruz, H., Coutinho, O. P., & Reis, R. L. (2005) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-005-3580-7 · Cited by 39
Self-citationCell Seeding of Polymer Scaffolds
Vunjak‐Novakovic, G., & Radisic, M. (2003) · Humana Press eBooks · doi:10.1385/1-59259-428-x:131 · Cited by 39
Effect of starch predrying on the mechanical properties of starch/poly(ε‐caprolactone) composites
Odusanya, O. S., Manan, D. M. A., Ishiaku, U. S., & Azemi, B. M. N. M. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11295 · Cited by 27
Engineering Biomaterials for Tissue Engineering
Mooney, D. J., & Langer, R. (1999) · The electrical engineering handbook/Electrical engineering handbook series/Electrical engineering handbook · doi:10.1201/9781420049510.ch112 · Cited by 25
Alves, C. M., Reis, R. L., & Hunt, J. A. (2010) · Soft Matter · doi:10.1039/c002972f · Cited by 18
Self-citation
Cited by
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Porous scaffolds for bone regeneration
Abbasi, N., Hamlet, S., Love, R. M., & Nguyen, N.-T. (2020) · Journal of Science: Advanced Materials and Devices · doi:10.1016/j.jsamd.2020.01.007 · Cited by 858
Biodegradable Materials for Bone Repair and Tissue Engineering Applications
Sheikh, Z., Najeeb, S., Khurshid, Z., Verma, V., Rashid, H., & Glogauer, M. (2015) · Materials · doi:10.3390/ma8095273 · Cited by 782
Van Bael, S., Chai, Y. C., Truscello, S., Moesen, M., Kerckhofs, G., Van Oosterwyck, H., Kruth, J.-P., & Schrooten, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.001 · Cited by 766
Polycaprolactone as biomaterial for bone scaffolds: Review of literature
Dwivedi, R., Kumar, S., Pandey, R., Mahajan, A., Nandana, D., Katti, D. S., & Mehrotra, D. (2020) · Journal of Oral Biology and Craniofacial Research · doi:10.1016/j.jobcr.2019.10.003 · Cited by 717
Metadata
- Authors
- Sobral, J. M., Caridade, S. G., Sousa, R. A., Mano, J. F., & Reis, R. L.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2011-03
- Volume
- 7
- Issue
- 3
- Pages
- 1009-1018
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2141577002
- Cited by
- 561
- References
- 63
- FWCI
- 12.38
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.