The DOI matches its Crossref record; 135 of the 135 references it cites were found in a registry or an index.
3D and 4D printing in dentistry and maxillofacial surgery: Printing techniques, materials, and applications
Open accessAbstract
3D and 4D printing are cutting-edge technologies for precise and expedited manufacturing of objects ranging from plastic to metal. Recent advances in 3D and 4D printing technologies in dentistry and maxillofacial surgery enable dentists to custom design and print surgical drill guides, temporary and permanent crowns and bridges, orthodontic appliances and orthotics, implants, mouthguards for drug delivery. In the present review, different 3D printing technologies available for use in dentistry are highlighted together with a critique on the materials available for printing. Recent reports of the application of these printed platformed are highlighted to enable readers appreciate the progress in 3D/4D printing in dentistry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
IOP Conference Series: Materials Science and Engineering
(2022) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/1231/1/011001 · Cited by 10,357
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
IOP Conf. Ser.: Mater. Sci. Eng. 117 012045
Wu, M., Vakhrushev, A., Ludwig, A., & Kharicha, A. (2016) · Cited by 4,975
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
Chen, Q., & Thouas, G. A. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.10.001 · Cited by 2,398
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Behl, M., & Lendlein, A. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70047-0 · Cited by 1,965
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Dawood, A., Marti, B. M., Sauret-Jackson, V., & Darwood, A. (2015) · British Dental Journal · doi:10.1038/sj.bdj.2015.914 · Cited by 1,133
Photo-curing 3D printing technique and its challenges
Quan, H., Zhang, T., Xu, H., Luo, S., Nie, J., & Zhu, X. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.12.003 · Cited by 1,106
Fabricated: The New World of 3D Printing
Lipson, H., & Kurman, M. (2013) · Cited by 1,032
Volumetric additive manufacturing via tomographic reconstruction
Kelly, B. E., Bhattacharya, I., Heidari, H., Shusteff, M., Spadaccini, C. M., & Taylor, H. K. (2019) · Science · doi:10.1126/science.aau7114 · Cited by 1,025
Projection micro-stereolithography using digital micro-mirror dynamic mask
Sun, C., Fang, N., Wu, D. M., & Zhang, X. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.011 · Cited by 880
Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Adib Kadri, N., & Osman, N. A. A. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/033502 · Cited by 755
De Aza, A. H., Chevalier, J., Fantozzi, G., Schehl, M., & Torrecillas, R. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00206-x · Cited by 625
Study of corrosion in biocompatible metals for implants: A review
Manam, N. S., Harun, W. S. W., Shri, D. N. A., Ghani, S. A. C., Kurniawan, T., Ismail, M. H., & Ibrahim, M. H. I. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.01.196 · Cited by 597
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
Yu, C., Schimelman, J., Wang, P., Miller, K. L., Ma, X., You, S., Guan, J., Sun, B., Zhu, W., & Chen, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00810 · Cited by 579
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
Alhnan, M. A., Okwuosa, T. C., Sadia, M., Wan, K.-W., Ahmed, W., & Arafat, B. (2016) · Pharmaceutical Research · doi:10.1007/s11095-016-1933-1 · Cited by 554
Scientific, technological and economic issues in metal printing and their solutions
DebRoy, T., Mukherjee, T., Milewski, J. O., Elmer, J. W., Ribic, B., Blecher, J. J., & Zhang, W. (2019) · Nature Materials · doi:10.1038/s41563-019-0408-2 · Cited by 543
Titanium Alloys for Dental Implants: A Review
W. Nicholson, J. (2020) · Prosthesis · doi:10.3390/prosthesis2020011 · Cited by 461
Additive manufacturing of ceramics for dental applications: A review
Galante, R., Figueiredo-Pina, C. G., & Serro, A. P. (2019) · Dental Materials · doi:10.1016/j.dental.2019.02.026 · Cited by 441
3D Printing in Dentistry—State of the Art
Kessler, A., Hickel, R., & Reymus, M. (2020) · Operative Dentistry · doi:10.2341/18-229-l · Cited by 432
Li, X., Liu, X., Wu, S., Yeung, K. W. K., Zheng, Y., & Chu, P. K. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.09.005 · Cited by 428
Sun, W., Starly, B., Daly, A. C., Burdick, J. A., Groll, J., Skeldon, G., Shu, W., Sakai, Y., Shinohara, M., Nishikawa, M., et al. (2020) · Biofabrication · doi:10.1088/1758-5090/ab5158 · Cited by 426
Additively manufactured porous tantalum implants
Wauthle, R., van der Stok, J., Amin Yavari, S., Van Humbeeck, J., Kruth, J.-P., Zadpoor, A. A., Weinans, H., Mulier, M., & Schrooten, J. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.12.003 · Cited by 417
Calcium phosphate cements for bone engineering and their biological properties
Xu, H. H., Wang, P., Wang, L., Bao, C., Chen, Q., Weir, M. D., Chow, L. C., Zhao, L., Zhou, X., & Reynolds, M. A. (2017) · Bone Research · doi:10.1038/boneres.2017.56 · Cited by 409
4D printing of polymeric materials for tissue and organ regeneration
Miao, S., Castro, N., Nowicki, M., Xia, L., Cui, H., Zhou, X., Zhu, W., Lee, S.-J., Sarkar, K., Vozzi, G., et al. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.005 · Cited by 408
Additive Technology: Update on Current Materials and Applications in Dentistry
Barazanchi, A., Li, K. C., Al‐Amleh, B., Lyons, K. M., & Waddell, J. N. (2016) · Journal of Prosthodontics · doi:10.1111/jopr.12510 · Cited by 383
Lu, Y., Mapili, G., Suhali, G., Chen, S., & Roy, K. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30601 · Cited by 380
Zirconia: Established facts and perspectives for a biomaterial in dental implantology
Hisbergues, M., Vendeville, S., & Vendeville, P. (2009) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31147 · Cited by 361
Direct selective laser sintering and melting of ceramics: a review
Sing, S. L., Yeong, W. Y., Wiria, F. E., Tay, B. Y., Zhao, Z., Zhao, L., Tian, Z., & Yang, S. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2015-0178 · Cited by 359
Hazeveld, A., Huddleston Slater, J. J. R., & Ren, Y. (2014) · American Journal of Orthodontics and Dentofacial Orthopedics · doi:10.1016/j.ajodo.2013.05.011 · Cited by 357
Garcia, J., Yang, Z., Mongrain, R., Leask, R. L., & Lachapelle, K. (2018) · BMJ Simulation and Technology Enhanced Learning · doi:10.1136/bmjstel-2017-000234 · Cited by 347
Recent advances in 3D printing of porous ceramics: A review
Hwa, L. C., Rajoo, S., Noor, A. M., Ahmad, N., & Uday, M. B. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2017.08.002 · Cited by 343
D'haese, J., Van De Velde, T., Komiyama, A., Hultin, M., & De Bruyn, H. (2012) · Clinical Implant Dentistry and Related Research · doi:10.1111/j.1708-8208.2010.00275.x · Cited by 336
Field responsive materials: photo-, electro-, magnetic- and ultrasound-sensitive polymers
Manouras, T., & Vamvakaki, M. (2017) · Polymer Chemistry · doi:10.1039/c6py01455k · Cited by 329
Advances in metals and alloys for joint replacement
Kunčická, L., Kocich, R., & Lowe, T. C. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.002 · Cited by 329
4D printing of high performance shape memory polymer using stereolithography
Choong, Y. Y. C., Maleksaeedi, S., Eng, H., Wei, J., & Su, P.-C. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.049 · Cited by 328
Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
Lee, A. Y., An, J., & Chua, C. K. (2017) · Engineering · doi:10.1016/j.eng.2017.05.014 · Cited by 326
Additive Manufacturing: Making Imagination the Major Limitation
Zhai, Y., Lados, D. A., & LaGoy, J. L. (2014) · JOM · doi:10.1007/s11837-014-0886-2 · Cited by 324
Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review
He, Y., Wu, Y., Fu, J., Gao, Q., & Qiu, J. (2016) · Electroanalysis · doi:10.1002/elan.201600043 · Cited by 313
Ruiz-Morales, J. C., Tarancón, A., Canales-Vázquez, J., Méndez-Ramos, J., Hernández-Afonso, L., Acosta-Mora, P., Marín Rueda, J. R., & Fernández-González, R. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03526d · Cited by 299
Li, H., Yang, H., Zheng, Y., Zhou, F., Qiu, K., & Wang, X. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.05.089 · Cited by 296
Cuan-Urquizo, E., Barocio, E., Tejada-Ortigoza, V., Pipes, R. B., Rodriguez, C. A., & Roman-Flores, A. (2019) · Materials · doi:10.3390/ma12060895 · Cited by 288
Role of implants surface modification in osseointegration: A systematic review
Liu, Y., Rath, B., Tingart, M., & Eschweiler, J. (2020) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36829 · Cited by 287
Shenoy, A., & Shenoy, N. (2010) · Journal of Conservative Dentistry · doi:10.4103/0972-0707.73379 · Cited by 263
Functional Materials for Two‐Photon Polymerization in Microfabrication
Carlotti, M., & Mattoli, V. (2019) · Small · doi:10.1002/smll.201902687 · Cited by 260
Self-citationKhan, S., Ali, S., & Bermak, A. (2019) · Sensors · doi:10.3390/s19051230 · Cited by 253
3D printing of hydrogel composite systems: Recent advances in technology for tissue engineering
Jang, T.-S., Jung, H.-D., Pan, H. M., Han, W. T., Chen, S., & Song, J. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.v4i1.126 · Cited by 251
3D Printing—Encompassing the Facets of Dentistry
Oberoi, G., Nitsch, S., Edelmayer, M., Janjić, K., Müller, A. S., & Agis, H. (2018) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2018.00172 · Cited by 250
Dehurtevent, M., Robberecht, L., Hornez, J.-C., Thuault, A., Deveaux, E., & Béhin, P. (2017) · Dental Materials · doi:10.1016/j.dental.2017.01.018 · Cited by 228
Makvandi, P., Ali, G. W., Della Sala, F., Abdel-Fattah, W. I., & Borzacchiello, A. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115023 · Cited by 215
Self-citation4D printing applications in medical field: A brief review
Javaid, M., & Haleem, A. (2019) · Clinical Epidemiology and Global Health · doi:10.1016/j.cegh.2018.09.007 · Cited by 212
Zhou, W., Qiao, Z., Nazarzadeh Zare, E., Huang, J., Zheng, X., Sun, X., Shao, M., Wang, H., Wang, X., Chen, D., et al. (2020) · Journal of Medicinal Chemistry · doi:10.1021/acs.jmedchem.9b02115 · Cited by 209
Self-citationEndodontic applications of 3D printing
Anderson, J., Wealleans, J., & Ray, J. (2018) · International Endodontic Journal · doi:10.1111/iej.12917 · Cited by 207
Accuracy of 3-Dimensionally Printed Full-Arch Dental Models: A Systematic Review
Etemad-Shahidi, Y., Qallandar, O. B., Evenden, J., Alifui-Segbaya, F., & Ahmed, K. E. (2020) · Journal of Clinical Medicine · doi:10.3390/jcm9103357 · Cited by 206
3D printing of a wearable personalized oral delivery device: A first-in-human study
Liang, K., Carmone, S., Brambilla, D., & Leroux, J.-C. (2018) · Science Advances · doi:10.1126/sciadv.aat2544 · Cited by 205
Polymeric and inorganic nanoscopical antimicrobial fillers in dentistry
Makvandi, P., Gu, J. T., Zare, E. N., Ashtari, B., Moeini, A., Tay, F. R., & Niu, L.-N. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.09.025 · Cited by 199
Self-citationCAD/CAM Complete Dentures: A Review of Two Commercial Fabrication Systems
Kattadiyil, M. T., Goodacre, C. J., & Baba, N. Z. (2013) · Journal of the California Dental Association · doi:10.1080/19424396.2013.12222317 · Cited by 197
3D Printing and Digital Processing Techniques in Dentistry: A Review of Literature
Lin, L., Fang, Y., Liao, Y., Chen, G., Gao, C., & Zhu, P. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801013 · Cited by 197
MicroRNA-146a Regulates Perfusion Recovery in Response to Arterial Occlusion via Arteriogenesis
Heuslein, J. L., McDonnell, S. P., Song, J., Annex, B. H., & Price, R. J. (2018) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2018.00001 · Cited by 189
Makvandi, P., Ali, G. W., Della Sala, F., Abdel-Fattah, W. I., & Borzacchiello, A. (2020) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.110195 · Cited by 188
Self-citationZare, E. N., Jamaledin, R., Naserzadeh, P., Afjeh-Dana, E., Ashtari, B., Hosseinzadeh, M., Vecchione, R., Wu, A., Tay, F. R., Borzacchiello, A., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b19435 · Cited by 177
Self-citationGao, M., Yan, X., Zhao, R., Shan, Y., Chen, Y., Jian, F., Long, H., & Lai, W. (2021) · European Journal of Orthodontics · doi:10.1093/ejo/cjaa037 · Cited by 176
Chen, J., Zhang, Z., Chen, X., Zhang, C., Zhang, G., & Xu, Z. (2014) · The Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2014.04.026 · Cited by 175
Progressive 3D Printing Technology and Its Application in Medical Materials
Fan, D., Li, Y., Wang, X., Zhu, T., Wang, Q., Cai, H., Li, W., Tian, Y., & Liu, Z. (2020) · Frontiers in Pharmacology · doi:10.3389/fphar.2020.00122 · Cited by 175
Harris, M., Potgieter, J., Archer, R., & Arif, K. M. (2019) · Materials · doi:10.3390/ma12101664 · Cited by 173
Technological considerations for 4D printing: An overview
Pei, E., & Loh, G. H. (2018) · Progress in Additive Manufacturing · doi:10.1007/s40964-018-0047-1 · Cited by 171
Clinical Applications of 3D Printing
Ballard, D. H., Trace, A. P., Ali, S., Hodgdon, T., Zygmont, M. E., DeBenedectis, C. M., Smith, S. E., Richardson, M. L., Patel, M. J., Decker, S. J., et al. (2018) · Academic Radiology · doi:10.1016/j.acra.2017.08.004 · Cited by 170
Comparison of 3D-printed porous tantalum and titanium scaffolds on osteointegration and osteogenesis
Wang, H., Su, K., Su, L., Liang, P., Ji, P., & Wang, C. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.109908 · Cited by 169
Additive manufacturing of dental polymers: An overview on processes, materials and applications
JOCKUSCH, J., & ÖZCAN, M. (2020) · Dental Materials Journal · doi:10.4012/dmj.2019-123 · Cited by 169
Hada, T., Kanazawa, M., Iwaki, M., Arakida, T., Soeda, Y., Katheng, A., Otake, R., & Minakuchi, S. (2020) · Materials · doi:10.3390/ma13153405 · Cited by 169
Bionic design and 3D printing of porous titanium alloy scaffolds for bone tissue repair
Zhao, L., Pei, X., Jiang, L., Hu, C., Sun, J., Xing, F., Zhou, C., Fan, Y., & Zhang, X. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.10.094 · Cited by 167
A Fast Mask Projection Stereolithography Process for Fabricating Digital Models in Minutes
Pan, Y., Zhou, C., & Chen, Y. (2012) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4007465 · Cited by 164
3D printed replicas for endodontic education
Reymus, M., Fotiadou, C., Kessler, A., Heck, K., Hickel, R., & Diegritz, C. (2019) · International Endodontic Journal · doi:10.1111/iej.12964 · Cited by 159
Cui, H., Miao, S., Esworthy, T. J., Lee, S., Zhou, X., Hann, S.-Y., Webster, T. J., Harris, B. T., & Zhang, L. G. (2019) · Nano Research · doi:10.1007/s12274-019-2340-9 · Cited by 156
Ge, L., Dong, L., Wang, D., Ge, Q., & Gu, G. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.02.041 · Cited by 153
Lowther, M., Louth, S., Davey, A. V., Hussain, A., Ginestra, P. S., Carter, L., Eisenstein, N., Grover, L. M., & Cox, S. C. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.05.033 · Cited by 147
Noro, A., Kaneko, M., Murata, I., et al. (2012) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32846 · Cited by 146
State of the art of bioimplants manufacturing: part I
Kang, C., & Fang, F. (2018) · Advances in Manufacturing · doi:10.1007/s40436-017-0207-4 · Cited by 143
pH-responsive polymers: properties, synthesis and applications
Reyes‐Ortega, F. (2014) · Elsevier eBooks · doi:10.1533/9780857097026.1.45 · Cited by 131
3D Printed Surgical Simulation Models as educational tool by maxillofacial surgeons
Werz, S. M., Zeichner, S. J., Berg, B.-I., Zeilhofer, H., & Thieringer, F. M. (2018) · European Journal Of Dental Education · doi:10.1111/eje.12332 · Cited by 131
Yang, W., Choi, W. S., Leung, Y. Y., Curtin, J. P., Du, R., Zhang, C.-Y., Chen, X., & Su, Y. (2018) · Oral Oncology · doi:10.1016/j.oraloncology.2018.01.005 · Cited by 127
Konieczny, B., Szczesio-Włodarczyk, A., Sokołowski, J., & Bociong, K. (2020) · Materials · doi:10.3390/ma13163524 · Cited by 125
3D imaging, 3D printing and 3D virtual planning in endodontics
Shah, P. K., & CHONG, B. S. (2018) · Clinical Oral Investigations · doi:10.1007/s00784-018-2338-9 · Cited by 122
Li, H., Song, L., Sun, J., Ma, J., & Shen, Z. J. (2018) · Advances in Applied Ceramics Structural Functional and Bioceramics · doi:10.1080/17436753.2018.1447834 · Cited by 121
3D Printed Teeth for the Preclinical Education of Dental Students
Höhne, C., & Schmitter, M. (2019) · Journal of Dental Education · doi:10.21815/jde.019.103 · Cited by 121
Jeong, H. Y., Woo, B. H., Kim, N., & Jun, Y. C. (2020) · Scientific Reports · doi:10.1038/s41598-020-63020-9 · Cited by 118
Xiao, R., & Huang, W. (2020) · Macromolecular Bioscience · doi:10.1002/mabi.202000108 · Cited by 117
3D Printing Approach in Dentistry: The Future for Personalized Oral Soft Tissue Regeneration
Nešić, D., Schaefer, B. M., Sun, Y., Saulačić, N., & Sailer, I. (2020) · Journal of Clinical Medicine · doi:10.3390/jcm9072238 · Cited by 117
A novel root analogue dental implant using CT scan and CAD/CAM: selective laser melting technology
Figliuzzi, M. M., Mangano, F. G., & Mangano, C. (2012) · International Journal of Oral and Maxillofacial Surgery · doi:10.1016/j.ijom.2012.01.014 · Cited by 114
Bioprinters for organs-on-chips
Miri, A. K., Mostafavi, E., Khorsandi, D., Hu, S.-K., Malpica, M., & Khademhosseini, A. (2019) · Biofabrication · doi:10.1088/1758-5090/ab2798 · Cited by 114
Self-citationHamza, H. M., Deen, K. M., & Haider, W. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.110980 · Cited by 111
Salah, M., Tayebi, L., Moharamzadeh, K., & Naini, F. B. (2020) · Maxillofacial Plastic and Reconstructive Surgery · doi:10.1186/s40902-020-00263-6 · Cited by 110
Saed, A. B., Behravesh, A. H., Hasannia, S., Ardebili, S. A. A., Akhoundi, B., & Pourghayoumi, M. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.04.076 · Cited by 108
3D printed simulation models based on real patient situations for hands‐on practice
Kröger, E., Dekiff, M., & Dirksen, D. (2016) · European Journal Of Dental Education · doi:10.1111/eje.12229 · Cited by 106
Additive Manufacturing for Guided Bone Regeneration: A Perspective for Alveolar Ridge Augmentation
Rider, P., Kačarević, Ž. P., Alkildani, S., Retnasingh, S., Schnettler, R., & Barbeck, M. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19113308 · Cited by 102
Oh, S. J., Lee, H., Jeong, Y. J., Nam, K. R., Kang, K. J., Han, S. J., Lee, K. C., Lee, Y. J., & Choi, J. Y. (2020) · Scientific Reports · doi:10.1038/s41598-020-72755-4 · Cited by 102
Zardad, A.-Z., Choonara, Y. E., du Toit, L. C., Kumar, P., Mabrouk, M., Kondiah, P. P. D., & Pillay, V. (2016) · Polymers · doi:10.3390/polym8100359 · Cited by 101
Park, S., Lee, H.-J., Kim, K., Lee, S. J., Lee, J.-T., Kim, S., Chang, N.-H., & Park, S. (2018) · Materials · doi:10.3390/ma11020238 · Cited by 100
Noorani, R. (2017) · CRC Press eBooks · doi:10.1201/9781315155494 · Cited by 99
Fiedor, P., & Ortyl, J. (2020) · Materials · doi:10.3390/ma13132951 · Cited by 99
Osseointegration of endodontic endosseous conesZirconium oxide vs titanium
Schultze–Mosgau, S., Schliephake, H., Radespiel‐Tröger, M., & Neukam, F. W. (2000) · Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontology · doi:10.1016/s1079-2104(00)80022-0 · Cited by 79
Biocompatibility of Photopolymers in 3D Printing
Alifui‐Segbaya, F., Varma, S., Lieschke, G. J., & George, R. (2017) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0064 · Cited by 77
A review on spacers and membranes: Conventional or hybrid additive manufacturing?
Koo, J. W., Ho, J. S., An, J., Zhang, Y., Chua, C. K., & Chong, T. H. (2020) · Water Research · doi:10.1016/j.watres.2020.116497 · Cited by 77
Antimicrobial modified hydroxyapatite composite dental bite by stereolithography
Makvandi, P., Corcione, C. E., Paladini, F., Gallo, A. L., Montagna, F., Jamaledin, R., Pollini, M., & Maffezzoli, A. (2017) · Polymers for Advanced Technologies · doi:10.1002/pat.4123 · Cited by 73
Self-citationSadeghi, A., Dottore, E. D., Mondini, A., & Mazzolai, B. (2019) · Soft Robotics · doi:10.1089/soro.2019.0025 · Cited by 72
Self-citationMangano, F. G., Bazzoli, M., Tettamanti, L., et al. (2012) · Lasers in Medical Science · doi:10.1007/s10103-012-1205-1 · Cited by 71
A novel quasicrystal-resin composite for stereolithography
Sakly, A., Kenzari, S., Bonina, D., et al. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.11.025 · Cited by 67
Li, X., Xie, B., Jin, J., et al. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.07.134 · Cited by 62
Messimer, S. L., Pereira, T. R., Patterson, A. E., Lubna, M., & Drozda, F. O. (2019) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp3010006 · Cited by 62
Elucidating the corrosion-related degradation mechanisms of a Ti-6Al-4V dental implant
Chen, X., Shah, K. C., Dong, S., Peterson, L., Plante, E. C. L., & Sant, G. (2020) · Dental Materials · doi:10.1016/j.dental.2020.01.008 · Cited by 62
Zare, E. N., Lakouraj, M. M., & Ramezani, A. (2015) · Advances in Polymer Technology · doi:10.1002/adv.21501 · Cited by 60
3D and 4D printing of pH-responsive and functional polymers and their composites
Muzaffar, A., Ahamed, M. B., Deshmukh, K., Kovářík, T., Křenek, T., & Pasha, S. K. K. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816805-9.00004-1 · Cited by 60
Neiva, E., Badia, S., Martín, A. F., & Chiumenti, M. (2019) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.6085 · Cited by 54
Shape-Memory Polymers in Dentistry: Systematic Review and Patent Landscape Report
Bruni, A., Serra, F. G., Deregibus, A., & Castroflorio, T. (2019) · Materials · doi:10.3390/ma12142216 · Cited by 54
Zare, E. N., Lakouraj, M. M., & Baghayeri, M. (2014) · International Journal of Polymeric Materials · doi:10.1080/00914037.2014.936588 · Cited by 53
Sun, Y., Lübbers, H., Agbaje, J. O., Schepers, S., Politis, C., Slycke, S. V., & Vrielinck, L. J. G. (2013) · Clinical Implant Dentistry and Related Research · doi:10.1111/cid.12189 · Cited by 52
Stereolithography‐based 3D printed photosensitive polymer/boron nitride nanoplatelets composites
Bustillos, J., Montero, D., Loganathan, A., Boesl, B., & Agarwal, A. K. (2017) · Polymer Composites · doi:10.1002/pc.24662 · Cited by 51
Zhang, L., Haddouti, E.-M., Welle, K., Burger, C., Kabir, K., & Schildberg, F. A. (2020) · International Journal of Nanomedicine · doi:10.2147/ijn.s248848 · Cited by 50
Modified commercial UV curable elastomers for passive 4D printing
Hingorani, H., Zhang, Y., Zhang, B., Serjouei, A., & Ge, Q. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1591540 · Cited by 47
Doe, Y., Ida, H., Seiryu, M., Deguchi, T., Takeshita, N., Sasaki, S., Sasaki, S., Irie, D., Tsuru, K., Ishikawa, K., et al. (2020) · Materialia · doi:10.1016/j.mtla.2020.100801 · Cited by 47
Chen, C., Chang, J.-H., Srimaneepong, V., Wen, J.-Y., Tung, O.-H., Yang, C.-H., Lin, H., Lee, T.-H., Han, Y. N., & Huang, H. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.126125 · Cited by 45
Review of metallic biomaterials in dental applications
Kumar, S. T., Devi, S. P., Krithika, C., & Raghavan, R. V. (2020) · Journal of Pharmacy And Bioallied Sciences · doi:10.4103/jpbs.jpbs_88_20 · Cited by 41
Hassan, E. A. M., Elarabi, S., Wei, Y., & Yu, M. (2017) · Textile Research Journal · doi:10.1177/0040517517708538 · Cited by 38
Kruth, J.-P., Vandenbroucke, B., Vaerenbergh, J. V., & Naert, I. E. (2026) · CRC Press eBooks · doi:10.1201/9781003759591-21 · Cited by 31
Dental root implants produced by the combined selective laser sintering/melting of titanium powders
Толочко, Н. К., Savich, V. V., Laoui, T., et al. (2002) · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · doi:10.1177/146442070221600406 · Cited by 31
Dental Composites – a Low-Dose Source of Bisphenol A?
Šimková, M., Tichý, A., Dušková, M., & Bradna, P. (2020) · Physiological Research · doi:10.33549/physiolres.934518 · Cited by 26
Biological responses to pediatric stainless steel crowns
Zafar, S., & Siddiqi, A. (2020) · Journal of Oral Science · doi:10.2334/josnusd.20-0083 · Cited by 25
Halim, Z. A. A., Yajid, M. A. M., Idris, M. H., & Hamdan, H. (2017) · Journal of Dispersion Science and Technology · doi:10.1080/01932691.2017.1382375 · Cited by 18
Four-dimensional printing applications in dentistry
Haleem, A., & Javaid, M. (2019) · Current Medicine Research and Practice · doi:10.1016/j.cmrp.2018.12.005 · Cited by 13
Shape-memory polymers for dental applications
do Nascimento, R. O., & Chirani, N. (2015) · Elsevier eBooks · doi:10.1016/b978-0-85709-698-2.00013-1 · Cited by 10
Cited by
Impact of Artificial Intelligence on Dental Education: A Review and Guide for Curriculum Update
Thurzo, A., Strunga, M., Urban, R., Surovková, J., & Afrashtehfar, K. I. (2023) · Education Sciences · doi:10.3390/educsci13020150 · Cited by 342
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Metadata
- Authors
- Khorsandi, D., Fahimipour, A., Abasian, P., Saber, S. S., Seyedi, M., Ghanavati, S., Ahmad, A., De Stephanis, A. A., Taghavinezhaddilami, F., Leonova, A., Mohammadinejad, R., Shabani, M., Mazzolai, B., Mattoli, V., Tay, F. R., & Makvandi, P.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2021-03
- Volume
- 122
- Pages
- 26-49
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W3116495124
- Cited by
- 428
- References
- 135
- FWCI
- 16.80
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.