The DOI matches its Crossref record; 167 of the 167 references it cites were found in a registry or an index.
Machine learning in additive manufacturing: State-of-the-art and perspectives
Open accessAbstract
Abstract Additive manufacturing (AM) has emerged as a disruptive digital manufacturing technology. However, its broad adoption in industry is still hindered by high entry barriers of design for additive manufacturing (DfAM), limited materials library, various processing defects, and inconsistent product quality. In recent years, machine learning (ML) has gained increasing attention in AM due to its unprecedented performance in data tasks such as classification, regression and clustering. This article provides a comprehensive review on the state-of-the-art of ML applications in a variety of AM domains. In the DfAM, ML can be leveraged to output new high-performance metamaterials and optimized topological designs. In AM processing, contemporary ML algorithms can help to optimize process parameters, and conduct examination of powder spreading and in-process defect monitoring. On the production of AM, ML is able to assist practitioners in pre-manufacturing planning, and product quality assessment and control. Moreover, there has been an increasing concern about data security in AM as data breaches could occur with the aid of ML techniques. Lastly, it concludes with a section summarizing the main findings from the literature and providing perspectives on some selected interesting applications of ML in research and development of AM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Gradient-based learning applied to document recognition
Lecun, Y., Bottou, L., Bengio, Y., & Haffner, P. (1998) · Proceedings of the IEEE · doi:10.1109/5.726791 · Cited by 58,805
XGBoost: A Scalable Tree Boosting System
Chen, T., & Guestrin, C. (2016) · Proceedings of the 22nd ACM SIGKDD International Conference on Knowledge Discovery and Data Mining · doi:10.1145/2939672.2939785 · Cited by 54,569
Labaca-Castro, R. (2023) · Machine Learning under Malware Attack · doi:10.1007/978-3-658-40442-0_9 · Cited by 19,272
GAN(Generative Adversarial Nets)
(2017) · Journal of Japan Society for Fuzzy Theory and Intelligent Informatics · doi:10.3156/jsoft.29.5_177_2 · Cited by 19,270
ANFIS: adaptive-network-based fuzzy inference system
Jang, J.-S. R. (1993) · IEEE Transactions on Systems, Man, and Cybernetics · doi:10.1109/21.256541 · Cited by 16,254
Advances in Neural Information Processing Systems 29
Teymur, O., Zygalakis, K., & Calderhead, B. (2016) · Cited by 13,887
Gaussian Processes for Machine Learning
Rasmussen, C. E., & Williams, C. K. I. (2005) · doi:10.7551/mitpress/3206.001.0001 · Cited by 11,705
Machine learning: Trends, perspectives, and prospects
Jordan, M. I., & Mitchell, T. M. (2015) · Science · doi:10.1126/science.aaa8415 · Cited by 9,955
Mastering the game of Go without human knowledge
Silver, D., Schrittwieser, J., Simonyan, K., Antonoglou, I., Huang, A., Guez, A., Hubert, T., Baker, L., Lai, M., Bolton, A., et al. (2017) · Nature · doi:10.1038/nature24270 · Cited by 9,084
How transferable are features in deep neural networks?
Yosinski, J., Clune, J., Bengio, Y., & Lipson, H. (2014) · arXiv · doi:10.48550/arxiv.1411.1792 · Cited by 6,061
Natural Language Processing (almost) from Scratch
Collobert, R., Weston, J., Bottou, L., Karlen, M., Kavukcuoglu, K., & Kuksa, P. P. (2011) · arXiv (Cornell University) · doi:10.48550/arxiv.1103.0398 · Cited by 4,962
Prototypical Networks for Few-shot Learning
Snell, J., Swersky, K., & Zemel, R. S. (2017) · arXiv (Cornell University) · doi:10.48550/arxiv.1703.05175 · Cited by 4,755
Distance Metric Learning for Large Margin Nearest Neighbor Classification
Weinberger, K. Q., & Saul, L. K. (2009) · Journal of Machine Learning Research · doi:10.5555/1577069.1577078 · Cited by 4,044
The global k-means clustering algorithm
Likas, A., Vlassis, N., & J. Verbeek, J. (2003) · Pattern Recognition · doi:10.1016/s0031-3203(02)00060-2 · Cited by 3,733
A general reinforcement learning algorithm that masters chess, shogi, and Go through self-play
Silver, D., Hubert, T., Schrittwieser, J., Antonoglou, I., Lai, M., Guez, A., Lanctot, M., Sifre, L., Kumaran, D., Graepel, T., et al. (2018) · Science · doi:10.1126/science.aar6404 · Cited by 3,562
Machine Learning Applications in Cancer Prognosis and Prediction
Kourou, K., Exarchos, T. P., Exarchos, K. P., Karamouzis, M. V., & Fotiadis, D. I. (2015) · Computational and Structural Biotechnology Journal · doi:10.1016/j.csbj.2014.11.005 · Cited by 3,338
Gardner, M. W., & Dorling, S. R. (1998) · Atmospheric Environment · doi:10.1016/s1352-2310(97)00447-0 · Cited by 3,324
Random forest classifier for remote sensing classification
Pal, M. (2005) · International Journal of Remote Sensing · doi:10.1080/01431160412331269698 · Cited by 3,283
Shi, B., Bai, X., & Yao, C. (2017) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2016.2646371 · Cited by 3,172
Recent Trends in Deep Learning Based Natural Language Processing [Review Article]
Young, T., Hazarika, D., Poria, S., & Cambria, E. (2018) · IEEE Computational Intelligence Magazine · doi:10.1109/mci.2018.2840738 · Cited by 2,921
Introduction to Bayesian Networks
(2019) · Operational Risk Modelling in Financial Services · doi:10.1002/9781119508557.ch12 · Cited by 2,569
Recurrent Neural Network Regularization
Zaremba, W., Sutskever, I., & Vinyals, O. (2014) · arXiv (Cornell University) · doi:10.48550/arxiv.1409.2329 · Cited by 2,123
A general-purpose machine learning framework for predicting properties of inorganic materials
Ward, L., Agrawal, A., Choudhary, A., & Wolverton, C. (2016) · npj Computational Materials · doi:10.1038/npjcompumats.2016.28 · Cited by 1,831
Deep learning for smart manufacturing: Methods and applications
Wang, J., Ma, Y., Zhang, L., Gao, R. X., & Wu, D. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.01.003 · Cited by 1,740
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Ning, F., Cong, W., Qiu, J., Wei, J., & Wang, S. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.06.013 · Cited by 1,718
Convolutional Radio Modulation Recognition Networks
O’Shea, T. J., Corgan, J., & Clancy, T. C. (2016) · Communications in Computer and Information Science · doi:10.1007/978-3-319-44188-7_16 · Cited by 1,584
Man vs. computer: Benchmarking machine learning algorithms for traffic sign recognition
Stallkamp, J., Schlipsing, M., Salmen, J., & Igel, C. (2012) · Neural Networks · doi:10.1016/j.neunet.2012.02.016 · Cited by 1,537
Self-taught learning: transfer learning from unlabeled data
Raina, R., Battle, A., Lee, H., Packer, B., & Ng, A. Y. (2007) · Proceedings of the 24th international conference on Machine learning · doi:10.1145/1273496.1273592 · Cited by 1,510
Lin, C.-F., & Wang, S.-D. (2002) · IEEE Transactions on Neural Networks · doi:10.1109/72.991432 · Cited by 1,494
Learning To Count Objects in Images
Lempitsky, V., & Zisserman, A. (2010) · Oxford University Research Archive (ORA) (University of Oxford) · Cited by 1,448
Kok, Y., Tan, X. P., Wang, P., Nai, M. L. S., Loh, N. H., Liu, E., & Tor, S. B. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.021 · Cited by 1,447
Self-citationRecent Trends in Deep Learning Based Natural Language Processing
Young, T., Hazarika, D., Poria, S., & Cambria, E. (2017) · arXiv (Cornell University) · doi:10.48550/arxiv.1708.02709 · Cited by 1,192
Understanding Data Augmentation for Classification: When to Warp?
Wong, S. C., Gatt, A., Stamatescu, V., & McDonnell, M. D. (2016) · 2016 International Conference on Digital Image Computing: Techniques and Applications (DICTA) · doi:10.1109/dicta.2016.7797091 · Cited by 1,007
Automatic Construction of Decision Trees from Data: A Multi-Disciplinary Survey
Murthy, S. K. (1998) · Data Mining and Knowledge Discovery · doi:10.1023/a:1009744630224 · Cited by 991
Recurrent convolutional neural network for object recognition
Liang, M., & Hu, X. (2015) · 2015 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2015.7298958 · Cited by 976
Machine learning assisted design of high entropy alloys with desired property
Wen, C., Zhang, Y., Wang, C., Xue, D., Bai, Y., Antonov, S., Dai, L., Lookman, T., & Su, Y. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.03.010 · Cited by 936
Self-citationDeep-Learning-Enabled On-Demand Design of Chiral Metamaterials
Ma, W., Cheng, F., & Liu, Y. (2018) · ACS Nano · doi:10.1021/acsnano.8b03569 · Cited by 925
Machine Learning for Predictive Maintenance: A Multiple Classifier Approach
Susto, G. A., Schirru, A., Pampuri, S., McLoone, S., & Beghi, A. (2015) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2349359 · Cited by 901
Accelerating materials property predictions using machine learning
Pilania, G., Wang, C., Jiang, X., Rajasekaran, S., & Ramprasad, R. (2013) · Scientific Reports · doi:10.1038/srep02810 · Cited by 853
Self-citationYu, S.-Z. (2010) · Artificial Intelligence · doi:10.1016/j.artint.2009.11.011 · Cited by 734
Selective laser melting of stainless steel 316L with low porosity and high build rates
Sun, Z., Tan, X., Tor, S. B., & Yeong, W. Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.035 · Cited by 714
Self-citationWu, D., Jennings, C., Terpenny, J., Gao, R. X., & Kumara, S. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036350 · Cited by 677
Damage-tolerant architected materials inspired by crystal microstructure
Pham, M.-S., Liu, C., Todd, I., & Lertthanasarn, J. (2019) · Nature · doi:10.1038/s41586-018-0850-3 · Cited by 665
Question Answering with Subgraph Embeddings
Bordes, A., Chopra, S., & Weston, J. (2014) · Proceedings of the 2014 Conference on Empirical Methods in Natural Language Processing (EMNLP) · doi:10.3115/v1/d14-1067 · Cited by 635
Unsupervised Learning of Models for Recognition
Weber, M., Welling, M., & Perona, P. (2000) · Lecture Notes in Computer Science · doi:10.1007/3-540-45054-8_2 · Cited by 594
Additive manufacturing of 3D nano-architected metals
Vyatskikh, A., Delalande, S., Kudo, A., Zhang, X., Portela, C. M., & Greer, J. R. (2018) · Nature Communications · doi:10.1038/s41467-018-03071-9 · Cited by 593
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2012) · Journal of Advanced Research · doi:10.1016/j.jare.2011.05.001 · Cited by 576
An Introduction to Bayesian Networks
Yakowitz, S. J. (1997) · Technometrics · doi:10.1080/00401706.1997.10485130 · Cited by 564
Gu, G. X., Chen, C.-T., Richmond, D. J., & Buehler, M. J. (2018) · Materials Horizons · doi:10.1039/c8mh00653a · Cited by 556
Machine-learning phase prediction of high-entropy alloys
Huang, W., Martin, P., & Zhuang, H. L. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.03.012 · Cited by 556
Qi, X., Chen, G., Li, Y., Cheng, X., & Li, C. (2019) · Engineering · doi:10.1016/j.eng.2019.04.012 · Cited by 529
Using deep neural network with small dataset to predict material defects
Feng, S., Zhou, H., & Dong, H. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.11.060 · Cited by 512
Safe, Multi-Agent, Reinforcement Learning for Autonomous Driving
Shalev-Shwartz, S., Shammah, S., & Shashua, A. (2016) · arXiv · doi:10.48550/arxiv.1610.03295 · Cited by 509
Scime, L., & Beuth, J. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.009 · Cited by 489
Advanced Steel Microstructural Classification by Deep Learning Methods
Azimi, S. M., Britz, D., Engstler, M., Fritz, M., & Mücklich, F. (2018) · Scientific Reports · doi:10.1038/s41598-018-20037-5 · Cited by 472
De novo composite design based on machine learning algorithm
Gu, G. X., Chen, C.-T., & Buehler, M. J. (2018) · Extreme Mechanics Letters · doi:10.1016/j.eml.2017.10.001 · Cited by 470
Learning driving styles for autonomous vehicles from demonstration
Kuderer, M., Gulati, S., & Burgard, W. (2015) · 2015 IEEE International Conference on Robotics and Automation (ICRA) · doi:10.1109/icra.2015.7139555 · Cited by 459
Gobert, C., Reutzel, E. W., Petrich, J., Nassar, A. R., & Phoha, S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.005 · Cited by 447
An Electric Energy Consumer Characterization Framework Based on Data Mining Techniques
Figueiredo, V., Rodrigues, F., Vale, Z., & Gouveia, J. B. (2005) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2005.846234 · Cited by 437
Prediction of surface roughness in extrusion-based additive manufacturing with machine learning
Li, Z., Zhang, Z., Shi, J., & Wu, D. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.01.004 · Cited by 432
Machine learning-based image processing for on-line defect recognition in additive manufacturing
Caggiano, A., Zhang, J., Alfieri, V., Caiazzo, F., Gao, R., & Teti, R. (2019) · CIRP Annals · doi:10.1016/j.cirp.2019.03.021 · Cited by 417
Shevchik, S. A., Kenel, C., Leinenbach, C., & Wasmer, K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.012 · Cited by 403
High-Throughput Machine-Learning-Driven Synthesis of Full-Heusler Compounds
Oliynyk, A. O., Antono, E., Sparks, T. D., Ghadbeigi, L., Gaultois, M. W., Meredig, B., & Mar, A. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02724 · Cited by 387
Scime, L., & Beuth, J. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2018.11.010 · Cited by 369
Interpretable Learning for Self-Driving Cars by Visualizing Causal Attention
Kim, J., & Canny, J. (2017) · 2017 IEEE International Conference on Computer Vision (ICCV) · doi:10.1109/iccv.2017.320 · Cited by 366
Machine learning approaches in medical image analysis: From detection to diagnosis
de Bruijne, M. (2016) · Medical Image Analysis · doi:10.1016/j.media.2016.06.032 · Cited by 347
Machine Learning Techniques for Anomaly Detection: An Overview
Omar, S., Ngadi, A., & H. Jebur, H. (2013) · International Journal of Computer Applications · doi:10.5120/13715-1478 · Cited by 344
Where does AlphaGo go: from church-turing thesis to AlphaGo thesis and beyond
Wang, F.-Y., Zhang, J. J., Zheng, X., Wang, X., Yuan, Y., Dai, X., Zhang, J., & Yang, L. (2016) · IEEE/CAA Journal of Automatica Sinica · doi:10.1109/jas.2016.7471613 · Cited by 342
Zhang, Y., Hong, G. S., Ye, D., Zhu, K., & Fuh, J. Y. H. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.002 · Cited by 335
A computer vision approach for automated analysis and classification of microstructural image data
DeCost, B. L., & Holm, E. A. (2015) · Computational Materials Science · doi:10.1016/j.commatsci.2015.08.011 · Cited by 327
Image driven machine learning methods for microstructure recognition
Chowdhury, A., Kautz, E., Yener, B., & Lewis, D. (2016) · Computational Materials Science · doi:10.1016/j.commatsci.2016.05.034 · Cited by 326
Xiong, J., Zhang, G., Hu, J., & Wu, L. (2014) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-012-0682-1 · Cited by 324
Scime, L., & Beuth, J. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.09.034 · Cited by 322
Neural networks for topology optimization
Sosnovik, I., & Oseledets, I. (2019) · Russian Journal of Numerical Analysis and Mathematical Modelling · doi:10.1515/rnam-2019-0018 · Cited by 302
Gandomi, A. H., & Alavi, A. H. (2012) · Neural Computing and Applications · doi:10.1007/s00521-011-0734-z · Cited by 300
Yuan, S., Shen, F., Bai, J., Chua, C. K., Wei, J., & Zhou, K. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.098 · Cited by 295
Online Real-Time Quality Monitoring in Additive Manufacturing Processes Using Heterogeneous Sensors
Rao, P. K., Liu, J. (., Roberson, D., Kong, Z. (., & Williams, C. (2015) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4029823 · Cited by 292
Tapia, G., Khairallah, S., Matthews, M., King, W. E., & Elwany, A. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1045-z · Cited by 284
Khanzadeh, M., Chowdhury, S., Tschopp, M. A., Doude, H. R., Marufuzzaman, M., & Bian, L. (2019) · IISE Transactions · doi:10.1080/24725854.2017.1417656 · Cited by 278
An informatics approach to transformation temperatures of NiTi-based shape memory alloys
Xue, D., Xue, D., Yuan, R., Zhou, Y., Balachandran, P. V., Ding, X., Sun, J., & Lookman, T. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.009 · Cited by 272
Automated Process Monitoring in 3D Printing Using Supervised Machine Learning
Delli, U., & Chang, S. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.07.111 · Cited by 265
Defect detection in selective laser melting technology by acoustic signals with deep belief networks
Ye, D., Hong, G. S., Zhang, Y., Zhu, K., & Fuh, J. Y. H. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1728-0 · Cited by 261
Artificial Neural Networks in Medical Diagnosis
Al-Shayea, Q. K. (2011) · Cited by 257
Learning Features From Music Audio With Deep Belief Networks.
Hamel, P., & Eck, D. (2010) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1414969 · Cited by 254
Zhang, M., Sun, C.-N., Zhang, X., Goh, P. C., Wei, J., Hardacre, D., & Li, H. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.105194 · Cited by 251
Prediction of porosity in metal-based additive manufacturing using spatial Gaussian process models
Tapia, G., Elwany, A. H., & Sang, H. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.05.009 · Cited by 250
A Transfer Learning Approach for Microstructure Reconstruction and Structure-property Predictions
Li, X., Zhang, Y., Zhao, H., Burkhart, C., Brinson, L. C., & Chen, W. (2018) · Scientific Reports · doi:10.1038/s41598-018-31571-7 · Cited by 248
Additive manufacturing of NiTi shape memory alloys using pre-mixed powders
Wang, C., Tan, X. P., Du, Z., Chandra, S., Sun, Z., Lim, C. W. J., Tor, S. B., Lim, C. S., & Wong, C. H. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.03.025 · Cited by 245
Self-citationA deep neural network for classification of melt-pool images in metal additive manufacturing
Kwon, O., Kim, H. G., Ham, M. J., Kim, W., Kim, G.-H., Cho, J.-H., Kim, N. I., & Kim, K. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-018-1451-6 · Cited by 242
A predictive machine learning approach for microstructure optimization and materials design
Liu, R., Kumar, A., Chen, Z., Agrawal, A., Sundararaghavan, V., & Choudhary, A. (2015) · Scientific Reports · doi:10.1038/srep11551 · Cited by 241
Zhao, S., Li, S. J., Wang, S. G., Hou, W. T., Li, Y., Zhang, L. C., Hao, Y. L., Yang, R., Misra, R. D. K., & Murr, L. E. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.02.060 · Cited by 239
Detecting cyber-physical attacks in CyberManufacturing systems with machine learning methods
Wu, M., Song, Z., & Moon, Y. B. (2019) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-017-1315-5 · Cited by 238
Question Answering with Subgraph EmbeddingsPreprint
Bordes, A., Chopra, S., & Weston, J. (2014) · arXiv (Cornell University) · doi:10.48550/arxiv.1406.3676 · Cited by 237
DeCost, B. L., Francis, T., & Holm, E. A. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.05.014 · Cited by 235
Reinforcement learning and optimal adaptive control: An overview and implementation examples
Khan, S. G., Herrmann, G., Lewis, F. L., Pipe, T., & Melhuish, C. (2012) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2012.03.004 · Cited by 234
Grasso, M., Demir, A. G., Previtali, B., & Colosimo, B. M. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.07.001 · Cited by 231
Grasso, M., Laguzza, V., Semeraro, Q., & Colosimo, B. M. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4034715 · Cited by 224
Chen, D., & Zheng, X. (2018) · Scientific Reports · doi:10.1038/s41598-018-26980-7 · Cited by 222
Automatic fault detection for laser powder-bed fusion using semi-supervised machine learning
Okaro, I. A., Jayasinghe, S., Sutcliffe, C., Black, K., Paoletti, P., & Green, P. L. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.01.006 · Cited by 219
Kondo, R., Yamakawa, S., Masuoka, Y., Tajima, S., & Asahi, R. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.09.004 · Cited by 212
3D Topology Optimization using Convolutional Neural NetworksPreprint
Banga, S., Gehani, H., Bhilare, S., Patel, S., & Kara, L. B. (2018) · arXiv (Cornell University) · doi:10.48550/arxiv.1808.07440 · Cited by 197
Influence of microstructure on mechanical properties of laser metal wire-deposited Ti-6Al-4V
Åkerfeldt, P., Antti, M., & Pederson, R. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.07.038 · Cited by 196
Advanced Steel Microstructure Classification by Deep Learning Methods
Azimi, S. M., Britz, D., Engstler, M., Fritz, M., & Mücklich, F. (2018) · MPG.PuRe (Max Planck Society) · Cited by 196
Mozaffar, M., Paul, A., Al-Bahrani, R., Wolff, S., Choudhary, A., Agrawal, A., Ehmann, K., & Cao, J. (2018) · Manufacturing Letters · doi:10.1016/j.mfglet.2018.10.002 · Cited by 192
Laser Direct Metal Deposition of 2024 Al Alloy: Trace Geometry Prediction via Machine Learning
Caiazzo, F., & Caggiano, A. (2018) · Materials · doi:10.3390/ma11030444 · Cited by 181
Li, Y., Sun, Y., Han, Q., Zhang, G., & Horváth, I. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.10.017 · Cited by 174
Solid Freeform Fabrication Proceedings -1999
Bourell, D. L., Beaman, J. J., Jr., C., Richard H., M., Harris L., B., & Joel, W. (1999) · doi:10.21236/ada377264 · Cited by 173
Lei, X., Liu, C., Du, Z., Zhang, W., & Guo, X. (2018) · Journal of Applied Mechanics · doi:10.1115/1.4041319 · Cited by 173
Sun, Z., Tan, X. P., Descoins, M., Mangelinck, D., Tor, S. B., & Lim, C. S. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.04.036 · Cited by 173
Self-citationOlakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.003 · Cited by 171
Ye, D., Hsi Fuh, J. Y., Zhang, Y., Hong, G. S., & Zhu, K. (2018) · ISA Transactions · doi:10.1016/j.isatra.2018.07.021 · Cited by 165
Tootooni, M. S., Dsouza, A., Donovan, R., Rao, P., Kong, Z., & Børgesen, P. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036641 · Cited by 164
Simple method to construct process maps for additive manufacturing using a support vector machine
Aoyagi, K., Wang, H., Sudo, H., & Chiba, A. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.013 · Cited by 164
Lattice Structure Design and Optimization With Additive Manufacturing Constraints
Tang, Y., Dong, G., Zhou, Q., & Zhao, Y. F. (2017) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2017.2685643 · Cited by 163
Wu, H., Yu, Z., & Wang, Y. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9548-6 · Cited by 156
A hybrid machine learning approach for additive manufacturing design feature recommendation
Yao, X., Moon, S. K., & Bi, G. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2016-0041 · Cited by 156
Khanzadeh, M., Rao, P., Jafari-Marandi, R., Smith, B. K., Tschopp, M. A., & Bian, L. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4038598 · Cited by 156
An investigation on sliding wear of FDM built parts
Sood, A. K., Equbal, A., Toppo, V., Ohdar, R., & Mahapatra, S. S. (2011) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2011.08.003 · Cited by 155
Wang, T., Kwok, T.-H., Zhou, C., & Vader, S. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.04.003 · Cited by 152
Khanzadeh, M., Tian, W., Yadollahi, A., Doude, H., Tschopp, M. A., & Bian, L. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.08.014 · Cited by 149
Wang, Z., & Adachi, Y. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.12.049 · Cited by 149
Bayraktar, Ö., Uzun, G., Çakıroğlu, R., & Güldaş, A. (2016) · Polymers for Advanced Technologies · doi:10.1002/pat.3960 · Cited by 145
Popova, E., Rodgers, T. M., Gong, X., Cecen, A., Madison, J. D., & Kalidindi, S. R. (2017) · Integrating materials and manufacturing innovation · doi:10.1007/s40192-017-0088-1 · Cited by 144
Navarro, P., Fernández, C., Borraz, R., & Alonso, D. (2016) · Sensors · doi:10.3390/s17010018 · Cited by 142
Jiang, J., Hu, G., Li, X., Xu, X. W., Zheng, P., & Stringer, J. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1576010 · Cited by 141
Acoustic Side-Channel Attacks on Additive Manufacturing Systems
Faruque, M. A. A., Chhetri, S. R., Canedo, A., & Jiang, W. (2016) · ACM/IEEE International Conference on Cyber-Physical Systems (ICCPS) · doi:10.1109/iccps.2016.7479068 · Cited by 135
Jafari-Marandi, R., Khanzadeh, M., Tian, W., Smith, B. K., & Bian, L. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.02.005 · Cited by 131
Noriega, Á., Blanco, D., Álvarez, B. J. Á., & García, A. M. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5196-2 · Cited by 128
Can robots assemble an IKEA chair?
Suárez-Ruiz, F., Zhou, X., & Pham, Q. (2018) · Science Robotics · doi:10.1126/scirobotics.aat6385 · Cited by 121
Chowdhury, S., Mhapsekar, K., & Anand, S. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4038293 · Cited by 114
Gola, J., Webel, J., Britz, D., Guitar, M. A., Staudt, T., Winter, M., & Mücklich, F. (2019) · Computational Materials Science · doi:10.1016/j.commatsci.2019.01.006 · Cited by 110
Handcrafted features and late fusion with deep learning for bird sound classification
Xie, J., & Zhu, M. (2019) · Ecological Informatics · doi:10.1016/j.ecoinf.2019.05.007 · Cited by 104
Montazeri, M., & Rao, P. (2018) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4040264 · Cited by 99
Building data-driven models with microstructural images: Generalization and interpretability
Ling, J., Hutchinson, M., Antono, E., DeCost, B., Holm, E. A., & Meredig, B. (2017) · Materials Discovery · doi:10.1016/j.md.2018.03.002 · Cited by 99
Computational discovery of extremal microstructure families
Chen, D., Skouras, M., Zhu, B., & Matusik, W. (2018) · Science Advances · doi:10.1126/sciadv.aao7005 · Cited by 98
Kappes, B. B., Moorthy, S., Drake, D., Geerlings, H., & Stebner, A. P. (2018) · The minerals, metals & materials series · doi:10.1007/978-3-319-89480-5_39 · Cited by 98
Ulu, E., Zhang, R., & Kara, L. B. (2015) · Computer Methods in Biomechanics and Biomedical Engineering Imaging & Visualization · doi:10.1080/21681163.2015.1030775 · Cited by 97
Neural-network-based model for build-time estimation in selective laser sintering
Munguía, J., Ciurana, J., & Romeva, C. R. (2009) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem1324 · Cited by 91
A deep Convolutional Neural Network for topology optimization with strong generalization abilityPreprint
Zhang, Y., Peng, B., Zhou, X., Cheng, X., & Wang, D. (2019) · arXiv (Cornell University) · doi:10.48550/arxiv.1901.07761 · Cited by 91
Lu, Z., Li, D., Lu, B., Zhang, A. F., Zhu, G., & Pi, G. (2010) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2010.01.002 · Cited by 90
A neural network approach to the modelling and analysis of stereolithography processes
Lee, S., Park, W., Cho, H. S., Zhang, W., & Leu, M. C. (2001) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/095440540121501206 · Cited by 77
Garg, A., Lam, J. S. L., & Savalani, M. M. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-6989-2 · Cited by 69
A New Approach for Online Monitoring of Additive Manufacturing Based on Acoustic Emission
Wu, H., Yu, Z., & Wang, Y. (2016) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2016-8551 · Cited by 66
Hojjati, A., Adhikari, A., Struckmann, K. M., Chou, E., Nguyen, T. N. T., Madan, K., Winslett, M., Gunter, C. A., & King, W. P. (2016) · ACM SIGSAC Conference on Computer and Communications Security (CCS) · doi:10.1145/2976749.2978323 · Cited by 66
Machine Learning Enabled Powder Spreading Process Map for Metal Additive Manufacturing (AM)
Zhang, W., Mehta, A., Desai, P. S., & Higgs, C. F. (2017) · Cited by 63
He, K., Yang, Z., Bai, Y., Long, J., & Li, C. (2018) · Sensors · doi:10.3390/s18041298 · Cited by 62
Mohamed, O. A., Masood, S. H., & Bhowmik, J. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2015-0198 · Cited by 60
Introduction to Supervised Learning
Verma, R., Nagar, V., & Mahapatra, S. (2021) · Wiley eBooks · doi:10.1002/9781119785620.ch1 · Cited by 57
Collins, P. C., Koduri, S. K., Welk, B. A., Tiley, J. S., & Fraser, H. L. (2012) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1498-5 · Cited by 56
Detection of elevated regions in surface images from laser beam melting processes
Jacobsmühlen, J. Z., Kleszczynski, S., Witt, G., & Merhof, D. (2015) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2015.7392275 · Cited by 55
Stathatos, E., & Vosniakos, G.-C. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04004-6 · Cited by 54
Mohamed, O. A., Masood, S. H., & Bhowmik, J. (2016) · Advances in Production Engineering & Management · doi:10.14743/apem2016.3.223 · Cited by 50
Development of an adaptive, self-learning control concept for an additive manufacturing process
Renken, V., Albinger, S., Goch, G., Neef, A., & Emmelmann, C. (2017) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2017.05.002 · Cited by 48
Intelligent Pattern Recognition of a SLM Machine Process and Sensor Data
Uhlmann, E., Pontes, R. P., Laghmouchi, A., & Bergmann, A. (2017) · Procedia CIRP · doi:10.1016/j.procir.2016.06.060 · Cited by 43
Microstructural diagram for steel based on crystallography with machine learning
Tsutsui, K., Terasaki, H., Maemura, T., Hayashi, K., Moriguchi, K., & Morito, S. (2018) · Computational Materials Science · doi:10.1016/j.commatsci.2018.12.003 · Cited by 43
Measurement of environmental aspect of 3-D printing process using soft computing methods
Garg, A., & Lam, J. S. L. (2015) · Measurement · doi:10.1016/j.measurement.2015.04.016 · Cited by 42
Detecting Attacks in CyberManufacturing Systems: Additive Manufacturing Example
Wu, M., Zhou, H., Lin, L. L., Silva, B., Song, Z., Cheung, J., & Moon, Y. B. (2017) · MATEC Web of Conferences · doi:10.1051/matecconf/201710806005 · Cited by 37
Machine Learning to Aid Tuning of Numerical Parameters in Topology Optimization
Lynch, M. E., Sarkar, S., & Maute, K. K. (2019) · Journal of Mechanical Design · doi:10.1115/1.4044228 · Cited by 37
A Survey on Recent Applications of Machine Learning with Big Data in Additive Manufacturing Industry
Alabi, M. O., Nixon, K. J., & Botef, I. (2018) · American Journal of Engineering and Applied Sciences · doi:10.3844/ajeassp.2018.1114.1124 · Cited by 30
Towards a fully automated 3D printability checker
Lu, T. (2016) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2016.7474875 · Cited by 26
An Example of Machine Learning Applied in Additive Manufacturing
Douard, A., Grandvallet, C., Pourroy, F., & Vignat, F. (2018) · IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) · doi:10.1109/ieem.2018.8607275 · Cited by 23
Zhang, Y., Dong, G., Yang, S. L., & Zhao, Y. F. (2019) · ASME International Computers in Engineering Conference and Engineering Database Symposium · doi:10.1115/detc2019-97610 · Cited by 18
Unsupervised Learning of Fuzzy Association Rules for Consumer Behavior Modeling
Orriols-Puig, A., Casillas, J., & Martínez-López, F. J. (2009) · Cited by 16
Smart cities, urban sensing, and big data: mining geo-location in social networks
Sacco, D., Motta, G., You, L., Bertolazzo, N., Carini, F., & Ma, T. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-812013-2.00005-8 · Cited by 15
Singh, A., Cooper, D. E., Blundell, N., Gibbons, G. J., & Pratihar, D. K. (2013) · Warwick Research Archive Portal (University of Warwick) · doi:10.82444/warw.33643621 · Cited by 11
Cited by
About metastable cellular structure in additively manufactured austenitic stainless steels
Kong, D., Dong, C., Wei, S., Ni, X., Zhang, L., Li, R., Wang, L., Man, C., & Li, X. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101804 · Cited by 528
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Research and application of machine learning for additive manufacturing
Qin, J., Hu, F., Liu, Y., Witherell, P., Wang, C. C. L., Rosen, D. W., Simpson, T. W., Lu, Y., & Tang, Q. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.102691 · Cited by 391
“There have been some existing review articles focusing on different perspectives of this topic [5], such as the ML for the material development of AM [6], and ML applications in laser powder bed fusion processes [7].”
Self-citationKumar, S., Gopi, T., Harikeerthana, N., Gupta, M. K., Gaur, V., Krolczyk, G. M., & Wu, C. (2023) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-022-02029-5 · Cited by 328
Machine learning for metal additive manufacturing: Towards a physics-informed data-driven paradigm
Guo, S., Agarwal, M., Cooper, C., Tian, Q., Gao, R. X., Guo, W., & Guo, Y. B. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.11.003 · Cited by 309
Metadata
- Authors
- Wang, C., Tan, X. P., Tor, S. B., & Lim, C. S.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 36
- Pages
- 101538
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W3049618663
- Cited by
- 693
- References
- 167
- FWCI
- 32.03
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.