The DOI matches its Crossref record; 352 of the 352 references it cites were found in a registry or an index.
Supercritical carbon dioxide-based technologies for the production of drug nanoparticles/nanocrystals – A comprehensive review
Abstract
ABSTRACT Low drug bioavailability, which is mostly a result of poor aqueous drug solubilities and of inadequate drug dissolution rates, is one of the most significant challenges that pharmaceutical companies are currently facing, since this may limit the therapeutic efficacy of marketed drugs, or even result in the discard of potential highly effective drug candidates during developmental stages. Two of the main approaches that have been implemented in recent years to overcome poor drug solubility/dissolution issues have frequently involved drug particle size reduction (i.e., micronization/nanonization) and/or the modification of some of the physicochemical and structural properties of poorly water soluble drugs. A large number of particle engineering methodologies have been developed, tested, and applied in the synthesis and control of particle size/particle‐size distributions, crystallinities, and polymorphic purities of drug micro‐ and nano‐particles/crystals. In recent years pharmaceutical processing using supercritical fluids (SCF), in general, and supercritical carbon dioxide (scCO2), in particular, have attracted a great attention from the pharmaceutical industry. This is mostly due to the several well‐known advantageous technical features of these processes, as well as to other increasingly important subjects for the pharmaceutical industry, namely their “green”, sustainable, safe and “environmentally‐friendly” intrinsic characteristics. In this work, it is presented a comprehensive state‐of‐the‐art review on scCO2‐based processes focused on the formation and on the control of the physicochemical, structural and morphological properties of amorphous/crystalline pure drug nanoparticles. It is presented and discussed the most relevant scCO2, scCO2‐based fluids and drug physicochemical properties that are pertinent for the development of successful pharmaceutical products, namely those that are critical in the selection of an adequate scCO2‐based method to produce pure drug nanoparticles/nanocrystals. scCO2‐based nanoparticle formation methodologies are classified in three main families, and in terms of the most important role played by scCO2 in particle formation processes: as a solvent; as an antisolvent or a co‐antisolvent; and as a “high mobility” additive (a solute, a co‐solute, or a co‐solvent). Specific particle formation methods belonging to each one of these families are presented, discussed and compared. Some selected amorphous/crystalline drug nanoparticles that were prepared by these methods are compiled and presented, namely those studied in the last 10–15 years. A special emphasis is given to the formation of drug cocrystals. It is also discussed the fundamental knowledge and the main mechanisms in which the scCO2‐based particle formation methods rely on, as well as the current status and urgent needs in terms of reliable experimental data and of robust modeling approaches. Other addressed and discussed topics include the currently available and the most adequate physicochemical, morphological and biological characterization methods required for pure drug nanoparticles/nanocrystals, some of the current nanometrology and regulatory issues associated to the use of these methods, as well as some scale‐up, post‐processing and pharmaceutical regulatory subjects related to the industrial implementation of these scCO2‐based processes. Finally, it is also discussed the current status of these techniques, as well as their future major perspectives and opportunities for industrial implementation in the upcoming years. Graphical abstract Figure. No caption available.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Properties of Gases and Liquids
Reid, R. C., Sherwood, T. K., & Street, R. E. (1959) · Physics Today · doi:10.1063/1.3060771 · Cited by 14,143
The properties of gases and liquids
(2001) · Choice Reviews Online · doi:10.5860/choice.38-5036 · Cited by 12,958
Modeling and comparison of dissolution profiles
Costa, P., & Sousa Lobo, J. M. (2001) · European Journal of Pharmaceutical Sciences · doi:10.1016/s0928-0987(01)00095-1 · Cited by 5,509
Green Chemistry: Principles and Practice
Anastas, P., & Eghbali, N. (2010) · Chem. Soc. Rev. · doi:10.1039/b918763b · Cited by 5,256
Factors affecting the clearance and biodistribution of polymeric nanoparticles
Alexis, F., Pridgen, E., Molnar, L. K., & Farokhzad, O. C. (2008) · Molecular Pharmaceutics · doi:10.1021/mp800051m · Cited by 3,699
THE RATE OF SOLUTION OF SOLID SUBSTANCES IN THEIR OWN SOLUTIONS.
Noyes, A. A., & Whitney, W. R. (1897) · Journal of the American Chemical Society · doi:10.1021/ja02086a003 · Cited by 1,884
A method for estimating both the solubility parameters and molar volumes of liquids
Fedors, R. F. (1974) · Polymer Engineering & Science · doi:10.1002/pen.760140211 · Cited by 1,779
Pharmaceutical Particle Engineering via Spray Drying
Vehring, R. (2008) · Pharmaceutical Research · doi:10.1007/s11095-007-9475-1 · Cited by 1,691
Nanosuspensions in drug delivery
Rabinow, B. E. (2004) · Nature Reviews Drug Discovery · doi:10.1038/nrd1494 · Cited by 1,524
Sharifi, S., Behzadi, S., Laurent, S., Laird Forrest, M., Stroeve, P., & Mahmoudi, M. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15188f · Cited by 1,460
Crystal engineering of active pharmaceutical ingredients to improve solubility and dissolution rates
Blagden, N., de Matas, M., Gavan, P. T., & York, P. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.05.011 · Cited by 1,448
Insoluble drug delivery strategies: review of recent advances and business prospects
Kalepu, S., & Nekkanti, V. (2015) · Acta Pharmaceutica Sinica B · doi:10.1016/j.apsb.2015.07.003 · Cited by 1,410
Amorphous pharmaceutical solids: preparation, characterization and stabilization
Yu, L. (2001) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00098-9 · Cited by 1,405
Mathematical modeling of drug delivery
Siepmann, J., & Siepmann, F. (2008) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2008.09.004 · Cited by 1,363
Nanosizing: a formulation approach for poorly-water-soluble compounds
Merisko-Liversidge, E., Liversidge, G. G., & Cooper, E. R. (2003) · European Journal of Pharmaceutical Sciences · doi:10.1016/s0928-0987(02)00251-8 · Cited by 1,263
Kawabata, Y., Wada, K., Nakatani, M., Yamada, S., & Onoue, S. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.08.032 · Cited by 1,181
Particle design using supercritical fluids: Literature and patent survey
Jung, J., & Perrut, M. (2001) · The Journal of Supercritical Fluids · doi:10.1016/s0896-8446(01)00064-x · Cited by 1,141
Supercritical and near-critical CO2 in green chemical synthesis and processing
Beckman, E. J. (2004) · The Journal of Supercritical Fluids · doi:10.1016/s0896-8446(03)00029-9 · Cited by 1,129
Nanoparticles for drug delivery: The need for precision in reporting particle size parameters
Gaumet, M., Vargas, A., Gurny, R., & Delie, F. (2008) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2007.08.001 · Cited by 1,081
Drug nanocrystals of poorly soluble drugs produced by high pressure homogenisation
KECK, C., & MULLER, R. (2006) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2005.05.009 · Cited by 1,061
Nanosizing — Oral formulation development and biopharmaceutical evaluation
Kesisoglou, F., Panmai, S., & Wu, Y. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.05.003 · Cited by 1,055
Khadka, P., Ro, J., Kim, H., Kim, I., Kim, J. T., Kim, H., Cho, J. M., Yun, G., & Lee, J. (2014) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2014.05.005 · Cited by 998
Baghel, S., Cathcart, H., & O'Reilly, N. J. (2016) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2015.10.008 · Cited by 970
Electrospraying route to nanotechnology: An overview
Jaworek, A., & Sobczyk, A. T. (2008) · Journal of Electrostatics · doi:10.1016/j.elstat.2007.10.001 · Cited by 963
Nanocrystal technology, drug delivery and clinical applications
Müller, R., & Junghanns (2008) · International Journal of Nanomedicine · doi:10.2147/ijn.s595 · Cited by 953
Pharmaceutical cocrystals: along the path to improved medicines
Duggirala, N. K., Perry, M. L., Almarsson, Ö., & Zaworotko, M. J. (2016) · Chemical Communications · doi:10.1039/c5cc08216a · Cited by 928
Handbook of chemical property estimation methods
Lyman, W. J., Reehl, W. F., & Rosenblatt, D. H. (1982) · Cited by 867
Supercritical fluids: technology and application to food processing
Brunner, G. (2005) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2004.05.060 · Cited by 839
DROP AND SPRAY FORMATION FROM A LIQUID JET
Lin, S. P., & Reitz, R. D. (1998) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.30.1.85 · Cited by 803
Supercritical Fluid Extraction
(2017) · Natural Food Flavors and Colorants · doi:10.1002/9781119114796.ch9 · Cited by 772
Melt extrusion: from process to drug delivery technology
Breitenbach, J. (2002) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/s0939-6411(02)00061-9 · Cited by 742
Shegokar, R., & Müller, R. H. (2010) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2010.07.044 · Cited by 740
A review of ionic liquids towards supercritical fluid applications
Keskin, S., Kayrak-Talay, D., Akman, U., & Hortaçsu, Ö. (2007) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2007.05.013 · Cited by 739
Van Eerdenbrugh, B., Van den Mooter, G., & Augustijns, P. (2008) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2008.07.023 · Cited by 717
Techniques for physicochemical characterization of nanomaterials
Lin, P.-C., Lin, S., Wang, P. C., & Sridhar, R. (2014) · Biotechnology Advances · doi:10.1016/j.biotechadv.2013.11.006 · Cited by 708
Müller, R. H., Gohla, S., & Keck, C. M. (2011) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2011.01.007 · Cited by 702
Sosnik, A., & Seremeta, K. P. (2015) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2015.05.003 · Cited by 671
Nalawade, S. P., Picchioni, F., & Janssen, L. P. B. M. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2005.08.002 · Cited by 670
Pharmaceutical cocrystals: An overview
Qiao, N., Li, M., Schlindwein, W., Malek, N., Davies, A., & Trappitt, G. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.07.037 · Cited by 665
Nanonization strategies for poorly water-soluble drugs
Chen, H., Khemtong, C., Yang, X., Chang, X., & Gao, J. (2011) · Drug Discovery Today · doi:10.1016/j.drudis.2010.02.009 · Cited by 642
Near critical and supercritical water. Part I. Hydrolytic and hydrothermal processes
Brunner, G. (2009) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2008.09.002 · Cited by 622
Supercritical antisolvent precipitation of micro- and nano-particles
Reverchon, E. (1999) · The Journal of Supercritical Fluids · doi:10.1016/s0896-8446(98)00129-6 · Cited by 617
Pharmaceutical cocrystals and poorly soluble drugs
Thakuria, R., Delori, A., Jones, W., Lipert, M. P., Roy, L., & Rodríguez-Hornedo, N. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2012.10.043 · Cited by 614
Continuous Hydrothermal Synthesis of Inorganic Nanoparticles: Applications and Future Directions
Darr, J. A., Zhang, J., Makwana, N. M., & Weng, X. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00417 · Cited by 614
Merisko-Liversidge, E., & Liversidge, G. G. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2010.12.007 · Cited by 608
Powers, K. W., Brown, S. C., Krishna, V. B., Wasdo, S. C., Moudgil, B. M., & Roberts, S. M. (2006) · Toxicological Sciences · doi:10.1093/toxsci/kfj099 · Cited by 605
Nanomaterials and supercritical fluids
Reverchon, E., & Adami, R. (2006) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2005.08.003 · Cited by 589
Drug Nanoparticles: Formulating Poorly Water-Soluble Compounds
Merisko-Liversidge, E. M., & Liversidge, G. G. (2008) · Toxicologic Pathology · doi:10.1177/0192623307310946 · Cited by 579
Handbook of Chemical Property Estimation Methods
Stewart, J. T. (1983) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.2600720132 · Cited by 578
Industrial applications of supercritical fluids: A review
Knez, Ž., Markočič, E., Leitgeb, M., Primožič, M., Knez Hrnčič, M., & Škerget, M. (2014) · Energy · doi:10.1016/j.energy.2014.07.044 · Cited by 573
Formation of polymer particles with supercritical fluids: A review
Yeo, S.-D., & Kiran, E. (2005) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2004.10.006 · Cited by 571
Drug delivery strategies for poorly water-soluble drugs
Fahr, A., & Liu, X. (2007) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.4.4.403 · Cited by 568
Jessop, P. G., & Subramaniam, B. (2007) · Chemical Reviews · doi:10.1021/cr040199o · Cited by 561
Nanomedicines: addressing the scientific and regulatory gap
Tinkle, S., McNeil, S. E., Mühlebach, S., Bawa, R., Borchard, G., Barenholz, Y. (., Tamarkin, L., & Desai, N. (2014) · Annals of the New York Academy of Sciences · doi:10.1111/nyas.12403 · Cited by 546
To Scale or Not to Scale: The Principles of Dose Extrapolation
Sharma, V., & McNeill, J. H. (2009) · British Journal of Pharmacology · doi:10.1111/j.1476-5381.2009.00267.x · Cited by 544
Fundamentals of crystallization: Kinetic effects on particle size distributions and morphology
Dirksen, J. A., & Ring, T. A. (1991) · Chemical Engineering Science · doi:10.1016/0009-2509(91)80035-w · Cited by 543
Sapsford, K. E., Tyner, K. M., Dair, B. J., Deschamps, J. R., & Medintz, I. L. (2011) · Analytical Chemistry · doi:10.1021/ac200853a · Cited by 538
Brunner, G. H. (1994) · Medical Entomology and Zoology · Cited by 527
Hydrothermal Synthesis of Metal Oxide Nanoparticles in Supercritical Water
Hayashi, H., & Hakuta, Y. (2010) · Materials · doi:10.3390/ma3073794 · Cited by 527
Spray drying formulation of amorphous solid dispersions
Singh, A., & Van den Mooter, G. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2015.12.010 · Cited by 526
Sinha, B., Müller, R. H., & Möschwitzer, J. P. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.01.019 · Cited by 523
Microwave and ultrasonic processing: Now a realistic option for industry
Leonelli, C., & Mason, T. J. (2010) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2010.05.006 · Cited by 512
Nanoparticles synthesis using supercritical fluid technology – towards biomedical applications
Byrappa, K., Ohara, S., & Adschiri, T. (2008) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.09.001 · Cited by 487
Nanomedicine scale-up technologies: feasibilities and challenges
Paliwal, R., Babu, R. J., & Palakurthi, S. (2014) · AAPS PharmSciTech · doi:10.1208/s12249-014-0177-9 · Cited by 466
Aspects of carbon dioxide utilization
Omae, I. (2006) · Catalysis Today · doi:10.1016/j.cattod.2006.02.024 · Cited by 463
Overview of milling techniques for improving the solubility of poorly water-soluble drugs
Loh, Z. H., Samanta, A. K., & Sia Heng, P. W. (2015) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2014.12.006 · Cited by 457
Production methods for nanodrug particles using the bottom-up approach
Chan, H.-K., & Kwok, P. C. L. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2011.03.011 · Cited by 451
Sauceau, M., Fages, J., Common, A., Nikitine, C., & Rodier, E. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.12.004 · Cited by 449
Pharmaceutical Processing with Supercritical Carbon Dioxide
Subramaniam, B., Rajewski, R. A., & Snavely, K. (1997) · Journal of Pharmaceutical Sciences · doi:10.1021/js9700661 · Cited by 444
Comparative assessment of nanomaterial definitions and safety evaluation considerations
Boverhof, D. R., Bramante, C. M., Butala, J. H., Clancy, S. F., Lafranconi, M., West, J., & Gordon, S. C. (2015) · Regulatory Toxicology and Pharmacology · doi:10.1016/j.yrtph.2015.06.001 · Cited by 443
Nanocrystals for enhancement of oral bioavailability of poorly water-soluble drugs
Junyaprasert, V. B., & Morakul, B. (2015) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2014.08.005 · Cited by 443
Thorat, A. A., & Dalvi, S. V. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.12.044 · Cited by 438
Drug nanocrystals in the commercial pharmaceutical development process
Möschwitzer, J. P. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2012.09.034 · Cited by 432
Regulatory aspects on nanomedicines
Sainz, V., Conniot, J., Matos, A. I., Peres, C., Zupanǒiǒ, E., Moura, L., Silva, L. C., Florindo, H. F., & Gaspar, R. S. (2015) · Biochemical and Biophysical Research Communications · doi:10.1016/j.bbrc.2015.08.023 · Cited by 417
Cocero, M. J., Martín, Á., Mattea, F., & Varona, S. (2009) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2008.08.015 · Cited by 411
Characterization of Nanoparticles for Therapeutics
Hall, J. B., Dobrovolskaia, M. A., Patri, A. K., & McNeil, S. E. (2007) · Nanomedicine · doi:10.2217/17435889.2.6.789 · Cited by 409
Berry, D. J., & Steed, J. W. (2017) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2017.03.003 · Cited by 406
Supercritical Fluid Applications: Industrial Developments and Economic Issues
Perrut, M. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie000211c · Cited by 397
Solubility in Supercritical Carbon Dioxide
Gupta, R. B., & Shim, J.-J. (2006) · CRC Press eBooks · doi:10.1201/9781420005998 · Cited by 390
Porous Materials and Supercritical Fluids
Cooper, A. I. (2003) · Advanced Materials · doi:10.1002/adma.200300380 · Cited by 389
Nanoparticle Engineering Processes for Enhancing the Dissolution Rates of Poorly Water Soluble Drugs
Hu, J., Johnston, K. P., & Williams, R. O. (2004) · Drug Development and Industrial Pharmacy · doi:10.1081/ddc-120030422 · Cited by 387
Nanoparticle Characterization: State of the Art, Challenges, and Emerging Technologies
Cho, E. J., Holback, H., Liu, K. C., Abouelmagd, S. A., Park, J., & Yeo, Y. (2013) · Molecular Pharmaceutics · doi:10.1021/mp300697h · Cited by 382
Amorphous solid dispersions: Rational selection of a manufacturing process
Vasconcelos, T., Marques, S., das Neves, J., & Sarmento, B. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.01.012 · Cited by 380
Pharmaceutical solvates, hydrates and amorphous forms: A special emphasis on cocrystals
Healy, A. M., Worku, Z. A., Kumar, D., & Madi, A. M. (2017) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2017.03.002 · Cited by 370
Assessing Nanoparticle Toxicity
Love, S. A., Maurer-Jones, M. A., Thompson, J. W., Lin, Y.-S., & Haynes, C. L. (2012) · Annual Review of Analytical Chemistry · doi:10.1146/annurev-anchem-062011-143134 · Cited by 367
Micron‐Size Drug Particles: Common and Novel Micronization Techniques
Rasenack, N., & Müller, B. W. (2004) · Pharmaceutical Development and Technology · doi:10.1081/pdt-120027417 · Cited by 357
Experimental Considerations on The Cytotoxicity of Nanoparticles
Kong, B., Seog, J. H., Graham, L. M., & Lee, S. B. (2011) · Nanomedicine · doi:10.2217/nnm.11.77 · Cited by 357
Supercritical fluid extraction
Clifford, A. A., & Bartle, K. D. (1993) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.280580320 · Cited by 357
Verma, S., Gokhale, R., & Burgess, D. J. (2009) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2009.07.005 · Cited by 354
Jiménez-González, C., Constable, D. J. C., & Ponder, C. S. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15215g · Cited by 352
Pharmaceutical aspects of salt and cocrystal forms of APIs and characterization challenges
Cerreia Vioglio, P., Chierotti, M. R., & Gobetto, R. (2017) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2017.07.001 · Cited by 350
Drug nanocrystals: in vivo performances.
Gao, L., Liu, G., Ma, J., Wang, X., Zhou, L., & Li, X. (2012) · Journal of Controlled Release · doi:10.1016/j.jconrel.2012.03.013 · Cited by 347
Particle formation with supercritical fluids—a review
Tom, J. W., & Debenedetti, P. G. (1991) · Journal of Aerosol Science · doi:10.1016/0021-8502(91)90013-8 · Cited by 342
The role of co-crystals in pharmaceutical design
Steed, J. W. (2013) · Trends in Pharmacological Sciences · doi:10.1016/j.tips.2012.12.003 · Cited by 341
Applications of Supercritical Fluids
Brunner, G. (2010) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-073009-101311 · Cited by 333
Micronization processes with supercritical fluids: Fundamentals and mechanisms
Martín, Á., & Cocero, M. J. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.06.019 · Cited by 325
Modification of supercritical fluid phase behavior using polar cosolvents
Dobbs, J. M., Wong, J. M., Lahiere, R. J., & Johnston, K. P. (1987) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00061a011 · Cited by 317
Polymeric materials formed by precipitation with a compressed fluid antisolvent
Dixon, D. J., Johnston, K. P., & Bodmeier, R. A. (1993) · AIChE Journal · doi:10.1002/aic.690390113 · Cited by 308
Formation of microparticulate protein powder using a supercritical fluid antisolvent
Yeo, S., Lim, G., Debendetti, P. G., & Bernstein, H. (1993) · Biotechnology and Bioengineering · doi:10.1002/bit.260410308 · Cited by 305
Review of supercritical fluids in inorganic materials science
Aymonier, C., Loppinet-Serani, A., Reverón, H., Garrabos, Y., & Cansell, F. (2006) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2006.03.019 · Cited by 304
Particle engineering techniques for inhaled biopharmaceuticals
Shoyele, S. A., & Cawthorne, S. (2006) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2006.07.010 · Cited by 301
Davies, O. R., Lewis, A. L., Whitaker, M. J., Tai, H., Shakesheff, K. M., & Howdle, S. M. (2008) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2006.12.001 · Cited by 299
Scott, G. (1992) · Endeavour · doi:10.1016/0160-9327(92)90023-i · Cited by 299
Widespread Nanoparticle-Assay Interference: Implications for Nanotoxicity Testing
Ong, K. J., MacCormack, T. J., Clark, R. J., Ede, J. D., Ortega, V. A., Felix, L. C., Dang, M. K. M., Ma, G., Fenniri, H., Veinot, J. G. C., et al. (2014) · PLoS ONE · doi:10.1371/journal.pone.0090650 · Cited by 298
Nanotherapeutics in the EU: an overview on current state and future directions
Pepic, I., Hafner, A., Lovric, J., & Perina Lakos, G. (2014) · International Journal of Nanomedicine · doi:10.2147/ijn.s55359 · Cited by 294
Supercritical Fluid Technology: An Emphasis on Drug Delivery and Related Biomedical Applications
Kankala, R. K., Zhang, Y. S., Wang, S., Lee, C., & Chen, A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700433 · Cited by 285
Drugs as materials: valuing physical form in drug discovery
Gardner, C. R., Walsh, C. T., & Almarsson, Ö. (2004) · Nature Reviews Drug Discovery · doi:10.1038/nrd1550 · Cited by 284
Supercritical impregnation of polymers
Kikic, I., & Vecchione, F. (2003) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2003.09.001 · Cited by 280
Profiling drug-like properties in discovery research
Di, L., & Kerns, E. H. (2003) · Current Opinion in Chemical Biology · doi:10.1016/s1367-5931(03)00055-3 · Cited by 278
Crist, R. M., Grossman, J. H., Patri, A. K., Stern, S. T., Dobrovolskaia, M. A., Adiseshaiah, P. P., Clogston, J. D., & McNeil, S. E. (2013) · Integrative Biology · doi:10.1039/c2ib20117h · Cited by 265
Recent Developments in the Crystallization Process: Toward the Pharmaceutical Industry
Gao, Z., Rohani, S., Gong, J., & Wang, J. (2017) · Engineering · doi:10.1016/j.eng.2017.03.022 · Cited by 260
The 24 Principles of Green Engineering and Green Chemistry: “IMPROVEMENTS PRODUCTIVELY”
Tang, S. Y., Bourne, R. A., Smith, R. L., & Poliakoff, M. (2008) · Green Chemistry · doi:10.1039/b719469m · Cited by 255
Drug loading of polymer implants by supercritical CO 2 assisted impregnation: A review
Champeau, M., Thomassin, J.-M., Tassaing, T., & Jérôme, C. (2015) · Journal of Controlled Release · doi:10.1016/j.jconrel.2015.05.002 · Cited by 254
Wang, W. V., Kramer, E. J., & Sachse, W. H. (1982) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1982.180200804 · Cited by 250
Engineered nanocrystal technology: In-vivo fate, targeting and applications in drug delivery
Pawar, V. K., Singh, Y., Meher, J. G., Gupta, S., & Chourasia, M. K. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.03.030 · Cited by 250
Solubility of Solids in Sub- and Supercritical Fluids: a Review
Škerget, M., Knez, Ž., & Knez-Hrnčič, M. (2011) · Journal of Chemical & Engineering Data · doi:10.1021/je1011373 · Cited by 246
Capretto, L., Carugo, D., Mazzitelli, S., Nastruzzi, C., & Zhang, X. (2013) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2013.08.002 · Cited by 244
Türk, M., Hils, P., Helfgen, B., Schaber, K., Martin, H.-J., & Wahl, M. A. (2002) · The Journal of Supercritical Fluids · doi:10.1016/s0896-8446(01)00109-7 · Cited by 244
Joung, S. N., Yoo, C. W., Shin, H. Y., Kim, S. Y., Yoo, K., Lee, C. S., & Huh, W. S. (2001) · Fluid Phase Equilibria · doi:10.1016/s0378-3812(01)00472-1 · Cited by 242
Toxicological considerations when creating nanoparticle-based drugs and drug delivery systems
Sharma, A., Madhunapantula, S. V., & Robertson, G. P. (2012) · Expert Opinion on Drug Metabolism & Toxicology · doi:10.1517/17425255.2012.637916 · Cited by 242
Melt extrusion with poorly soluble drugs
Shah, S., Maddineni, S., Lu, J., & Repka, M. A. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2012.11.001 · Cited by 241
Joris, F., Manshian, B. B., Peynshaert, K., De Smedt, S. C., Braeckmans, K., & Soenen, S. J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60145e · Cited by 236
Strategies for particle design using supercritical fluid technologies
York, P. (1999) · Pharmaceutical Science & Technology Today · doi:10.1016/s1461-5347(99)00209-6 · Cited by 232
Gallagher, P. M., Coffey, M. P., Krukonis, V. J., & Klasutis, N. (1989) · ACS Symposium Series · doi:10.1021/bk-1989-0406.ch022 · Cited by 231
Cocrystals to facilitate delivery of poorly soluble compounds beyond-rule-of-5
Kuminek, G., Cao, F., Bahia de Oliveira da Rocha, A., Gonçalves Cardoso, S., & Rodríguez-Hornedo, N. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.022 · Cited by 230
Spring and parachute: How cocrystals enhance solubility
Bavishi, D. D., & Borkhataria, C. H. (2016) · Progress in Crystal Growth and Characterization of Materials · doi:10.1016/j.pcrysgrow.2016.07.001 · Cited by 230
Application of Drug Nanocrystal Technologies on Oral Drug Delivery of Poorly Soluble Drugs
Gao, L., Liu, G., Ma, J., Wang, X., Zhou, L., Li, X., & Wang, F. (2013) · Pharmaceutical Research · doi:10.1007/s11095-012-0889-z · Cited by 227
Applications of supercritical carbon dioxide in materials processing and synthesis
Zhang, X., Heinonen, S., & Levänen, E. (2014) · RSC Adv. · doi:10.1039/c4ra10662h · Cited by 223
Pharmaceutical spray freeze drying
Wanning, S., Süverkrüp, R., & Lamprecht, A. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.04.053 · Cited by 219
Design of functional nanostructured materials using supercritical fluids
Cansell, F., & Aymonier, C. (2008) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2008.10.002 · Cited by 216
Perrut, M., Jung, J., & Leboeuf, F. (2005) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2004.09.007 · Cited by 215
Cocrystallization for successful drug delivery
Sun, C. C. (2013) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2013.747508 · Cited by 215
Nanomilling of Drugs for Bioavailability Enhancement: A Holistic Formulation-Process Perspective
Li, M., Azad, M., Davé, R., & Bilgili, E. (2016) · Pharmaceutics · doi:10.3390/pharmaceutics8020017 · Cited by 215
Green process chemistry in the pharmaceutical industry
Cue, B. W., & Zhang, J. (2009) · Green Chemistry Letters and Reviews · doi:10.1080/17518250903258150 · Cited by 210
Pillay, V., & Fassihi, R. (1998) · Journal of Controlled Release · doi:10.1016/s0168-3659(98)00022-4 · Cited by 206
Microbial inactivation by high-pressure
Spilimbergo, S., Elvassore, N., & Bertucco, A. (2002) · The Journal of Supercritical Fluids · doi:10.1016/s0896-8446(01)00106-1 · Cited by 205
Nanosizing techniques for improving bioavailability of drugs
Al-Kassas, R., Bansal, M., & Shaw, J. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.06.003 · Cited by 203
Supercritical Fluid Technology for Drug Product Development
(2004) · CRC Press eBooks · doi:10.1201/9780203021378 · Cited by 201
Use of supercritical fluids for different processes including new developments—a review
Marr, R., & Gamse, T. (2000) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/s0255-2701(99)00070-7 · Cited by 198
Particle-Induced Artifacts in the MTT and LDH Viability Assays
Holder, A. L., Goth-Goldstein, R., Lucas, D., & Koshland, C. P. (2012) · Chemical Research in Toxicology · doi:10.1021/tx3001708 · Cited by 196
Pharmaceutical cocrystals, salts and polymorphs: Advanced characterization techniques
Pindelska, E., Sokal, A., & Kolodziejski, W. (2017) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2017.09.014 · Cited by 193
Supercritical fluids processing of polymers for pharmaceutical and medical applications
Reverchon, E., Adami, R., Cardea, S., & Porta, G. D. (2009) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2008.10.001 · Cited by 190
Fine particle formation using supercritical fluids
Hakuta, Y., Hayashi, H., & Arai, K. (2003) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2003.12.005 · Cited by 189
Tom, J. W., & Debenedetti, P. G. (1991) · Biotechnology Progress · doi:10.1021/bp00011a004 · Cited by 181
Dias, A. M. A., Braga, M. E. M., Seabra, I. J., Ferreira, P., Gil, M. H., & de Sousa, H. C. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.01.063 · Cited by 180
Self-citationNear and supercritical water. Part II: Oxidative processes
Brunner, G. (2009) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2008.09.001 · Cited by 179
Tabernero, A., Martín del Valle, E. M., & Galán, M. A. (2012) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2012.06.004 · Cited by 174
Polymeric Microspheres Prepared by Spraying into Compressed Carbon Dioxide
Bodmeier, R., Wang, H., Dixon, D. J., Mawson, S., & Johnston, K. P. (1995) · Pharmaceutical Research · doi:10.1023/a:1016276329672 · Cited by 173
Reverchon, E., Adami, R., Caputo, G., & De Marco, I. (2008) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2008.06.002 · Cited by 173
Supercritical fluids and polymers – The year in review – 2014
Kiran, E. (2016) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2015.11.011 · Cited by 173
Preparation of cyclosporine A nanoparticles by evaporative precipitation into aqueous solution
Chen, X., Young, T. J., Sarkari, M., Williams, R. O., & Johnston, K. P. (2002) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(02)00147-3 · Cited by 171
Synthesis of nanostructured materials using supercritical CO2: Part I. Physical transformations
Sanli, D., Bozbag, S. E., & Erkey, C. (2012) · Journal of Materials Science · doi:10.1007/s10853-011-6054-y · Cited by 170
Microencapsulation of proteins by rapid expansion of supercritical solution with a nonsolvent
Mishima, K., Matsuyama, K., Tanabe, D., Yamauchi, S., Young, T. J., & Johnston, K. P. (2000) · AIChE Journal · doi:10.1002/aic.690460418 · Cited by 170
Production of micro- and nano-composite particles by supercritical carbon dioxide
Bahrami, M., & Ranjbarian, S. (2007) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2006.05.006 · Cited by 169
Are pharmaceutics really going supercritical?
Pasquali, I., & Bettini, R. (2008) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2008.05.014 · Cited by 169
Patterson, J. E., James, M. B., Forster, A. H., Lancaster, R. W., Butler, J. M., & Rades, T. (2007) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2006.11.030 · Cited by 169
Supercritical fluid technology: a promising approach in pharmaceutical research
Girotra, P., Singh, S. K., & Nagpal, K. (2013) · Pharmaceutical Development and Technology · doi:10.3109/10837450.2012.726998 · Cited by 168
Sodeifian, G., & Sajadian, S. A. (2018) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2017.10.015 · Cited by 166
Nanoformulation and encapsulation approaches for poorly water-soluble drug nanoparticles
Wais, U., Jackson, A. W., He, T., & Zhang, H. (2016) · Nanoscale · doi:10.1039/c5nr07161e · Cited by 164
Ehmann, F., Sakai-Kato, K., Duncan, R., Pérez de la Ossa, D. H., Pita, R., Vidal, J.-M., Kohli, A., Tothfalusi, L., Sanh, A., Tinton, S., et al. (2013) · Nanomedicine · doi:10.2217/nnm.13.68 · Cited by 160
Pharmaceutical Cocrystals: Regulatory and Strategic Aspects, Design and Development
Gadade, D. D., & Pekamwar, S. S. (2016) · Advanced Pharmaceutical Bulletin · doi:10.15171/apb.2016.062 · Cited by 160
Solubilization of Biomolecules in Carbon Dioxide Based Supercritical Fluids
Wong, J. M., & Johnston, K. P. (1986) · Biotechnology Progress · doi:10.1002/btpr.5420020107 · Cited by 159
dos Santos, D. T., Albarelli, J. Q., Beppu, M. M., & Meireles, M. A. A. (2011) · Food Research International · doi:10.1016/j.foodres.2011.04.019 · Cited by 159
Extrusion assisted by supercritical CO2: A review on its application to biopolymers
Chauvet, M., Sauceau, M., & Fages, J. (2017) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2016.05.043 · Cited by 158
High-Pressure Vapor−Liquid Equilbria of Some Carbon Dioxide + Organic Binary Systems
Lazzaroni, M. J., Bush, D., Brown, J. S., & Eckert, C. A. (2004) · Journal of Chemical & Engineering Data · doi:10.1021/je0498560 · Cited by 157
Drug nanocrystals – Versatile option for formulation of poorly soluble materials
Peltonen, L., & Hirvonen, J. J. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.12.005 · Cited by 157
Viscosity of pure carbon dioxide at supercritical region: Measurement and correlation approach
Heidaryan, E., Hatami, T., Rahimi, M., & Moghadasi, J. (2010) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2010.12.006 · Cited by 155
Aerosol solvent extraction system — a new microparticle production technique
Bleich, J. N., Müller, B. W., & Waßmus, W. (1993) · International Journal of Pharmaceutics · doi:10.1016/0378-5173(93)90131-x · Cited by 155
Application of supercritical antisolvent method in drug encapsulation: a review
Kalani, M., & Yunus (2011) · International Journal of Nanomedicine · doi:10.2147/ijn.s19021 · Cited by 153
Drug delivery strategies for poorly water-soluble drugs: the industrial perspective
van Hoogevest, P., Liu, X., & Fahr, A. (2011) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2011.614228 · Cited by 150
Particle design of poorly water-soluble drug substances using supercritical fluid technologies
Yasuji, T., Takeuchi, H., & Kawashimà, Y. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.03.025 · Cited by 149
Cosolvent interactions in supercritical fluid solutions
Ekart, M. P., Bennett, K. L., Ekart, S. M., Gurdial, G. S., Liotta, C. L., & Eckert, C. A. (1993) · AIChE Journal · doi:10.1002/aic.690390206 · Cited by 148
Sterilization and virus inactivation by supercritical fluids (a review)
Perrut, M. (2011) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2011.07.007 · Cited by 148
Homogeneous nucleation in supercritical fluids
Debenedetti, P. G. (1990) · AIChE Journal · doi:10.1002/aic.690360902 · Cited by 147
Drug Encapsulation Using Supercritical Fluid Extraction of Emulsions
Chattopadhyay, P., Huff, R., & Shekunov, B. Y. (2006) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.20555 · Cited by 147
Ultrasound Assisted Crystallization of Paracetamol: Crystal Size Distribution and Polymorph Control
Bhangu, S. K., Ashokkumar, M., & Lee, J. (2016) · Crystal Growth & Design · doi:10.1021/acs.cgd.5b01470 · Cited by 147
Nanosuspensions of poorly water-soluble drugs prepared by bottom-up technologies
Du, J., Li, X., Zhao, H., Zhou, Y., Wang, L., Tian, S., & Wang, Y. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.09.021 · Cited by 146
High pressure micronization for food applications
Weidner, E. (2008) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2008.11.009 · Cited by 145
Phase Behavioral Effects on Particle Formation Processes Using Supercritical Fluids
Palakodaty, S., & York, P. (1999) · Pharmaceutical Research · doi:10.1023/a:1011957512347 · Cited by 144
Preparation of Drug Delivery Systems Using Supercritical Fluid Technology
Koushik, K., & Kompella, U. B. (2001) · Critical Reviews in Therapeutic Drug Carrier Systems · doi:10.1615/critrevtherdrugcarriersyst.v18.i2.20 · Cited by 143
Kikic, I., Lora, M., & Bertucco, A. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970376u · Cited by 143
Formation of small organic particles by RESS: experimental and theoretical investigations
Türk, M. (1999) · The Journal of Supercritical Fluids · doi:10.1016/s0896-8446(98)00131-4 · Cited by 142
A novel particle engineering technology: spray-freezing into liquid
Rogers, T. L., Hu, J., Yu, Z., Johnston, K. P., & Williams, R. O. (2002) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(02)00154-0 · Cited by 141
Ross, S. A., Lamprou, D. A., & Douroumis, D. (2016) · Chemical Communications · doi:10.1039/c6cc01289b · Cited by 141
Nagy, Z. K., Balogh, A., Drávavölgyi, G., Ferguson, J. W., Pataki, H., Vajna, B., & Marosi, G. (2012) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.23374 · Cited by 140
Rogers, T. L., Johnston, K. P., & Williams, R. O. (2001) · Drug Development and Industrial Pharmacy · doi:10.1081/ddc-100108363 · Cited by 138
Thakur, R., & Gupta, R. B. (2005) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2005.11.005 · Cited by 134
Hojjati, M., Yamini, Y., Khajeh, M., & Vatanara, A. (2006) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2006.10.006 · Cited by 133
Processing Pharmaceutical Compounds Using Dense Gas Technology
Foster, N. R., Mammucari, R., Dehghani, F., Barrett, A., Bezanehtak, K., Coen, E. M., Combes, G. B., Meure, L. A., Ng, A., Regtop, H. L., et al. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030219x · Cited by 133
Application of supercritical fluids for the production of sustained delivery devices
Debenedetti, P. G., Tom, J. W., Sang-Do, Y., & Lim, G. (1993) · Journal of Controlled Release · doi:10.1016/0168-3659(93)90166-3 · Cited by 132
Meziani, M. J., & Sun, Y. (2003) · Journal of the American Chemical Society · doi:10.1021/ja030104k · Cited by 131
Supercritical fluids applications in nanomedicine
Campardelli, R., Baldino, L., & Reverchon, E. (2015) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2015.01.030 · Cited by 128
Solubility of some phenolic compounds contained in grape seeds, in supercritical carbon dioxide
Murga, R., Sanz, M. T., Beltrán, S., & Cabezas, J. L. (2002) · The Journal of Supercritical Fluids · doi:10.1016/s0896-8446(02)00033-5 · Cited by 123
Combinative Particle Size Reduction Technologies for the Production of Drug Nanocrystals
Salazar, J., Müller, R. H., & Möschwitzer, J. P. (2014) · Journal of Pharmaceutics · doi:10.1155/2014/265754 · Cited by 123
Salazar, J., Ghanem, A., Müller, R. H., & Möschwitzer, J. P. (2012) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2011.12.015 · Cited by 122
Development of therapeutic contact lenses using a supercritical solvent impregnation method
Costa, V. P., Braga, M. E. M., Guerra, J. P., Duarte, A. R. C., Duarte, C. M. M., Leite, E. O. B., Gil, M. H., & de Sousa, H. C. (2010) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2010.02.001 · Cited by 122
Self-citationBarron, M. K., Young, T. J., Johnston, K. P., & Williams, R. O. (2003) · AAPS PharmSciTech · doi:10.1208/pt040212 · Cited by 121
Eastoe, J., Gold, S., & Steytler, D. C. (2006) · Langmuir · doi:10.1021/la060764d · Cited by 121
Solubility of Aspirin in Supercritical Carbon Dioxide with and without Acetone
Huang, Z., Lu, W. D., Kawi, S., & Chiew, Y. C. (2004) · Journal of Chemical & Engineering Data · doi:10.1021/je0499465 · Cited by 119
Ke, W., Li, J., Wang, W., et al. (2008) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21598 · Cited by 119
Cited by
Lipid Nanoparticles for Drug Delivery
Xu, L., Wang, X., Liu, Y., Yang, G., Falconer, R. J., & Zhao, C.-X. (2022) · Advanced NanoBiomed Research · doi:10.1002/anbr.202100109 · Cited by 545
Nanoscale Drug Delivery Systems: From Medicine to Agriculture
Vega-Vásquez, P., Mosier, N. S., & Irudayaraj, J. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00079 · Cited by 323
Aerogels in drug delivery: From design to application
García-González, C. A., Sosnik, A., Kalmár, J., De Marco, I., Erkey, C., Concheiro, A., & Alvarez-Lorenzo, C. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2021.02.012 · Cited by 305
Desai, N., Rana, D., Patel, M., Bajwa, N., Prasad, R., & Vora, L. K. (2025) · Small · doi:10.1002/smll.202502315 · Cited by 295
Metadata
- Authors
- Padrela, L., Rodrigues, M. A., Duarte, A., Dias, A. M. A., Braga, M. E. M., & de Sousa, H. C.
- Venue
- Advanced Drug Delivery Reviews
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 131
- Pages
- 22-78
- ISSN
- 0169-409X (ISSN-L)
- OpenAlex
- W2883481262
- Cited by
- 262
- References
- 352
- FWCI
- 1.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.