Challenges of fused deposition modeling 3D printing in pharmaceutical applications: Where are we now?
The DOI matches its Crossref record; 101 of the 101 references it cites were found in a registry or an index.
Abstract
In recent years, fused deposition modeling has become one of the most used three-dimensional printing technologies in the pharmaceutical field. The production of personalized dosage forms for individualized therapy and the modification of the drug release profile by the elaboration of complex geometries make fused deposition modeling a promising tool for small-scale production. However, fused deposition modeling has a considerable number of challenges to overcome. They are divided into three categories of parameters. Material-specific parameters encompass the physicochemical properties of the filament, like thermal, mechanical and rheological properties. They determine the feasibility of the printing process. Operation-specific parameters relate to the processing conditions of printing, such as printing temperature and infill density, which have an influence on the final quality and on the dissolution behavior of the objects. The printer equipment is defined by the machine-specific parameters. Some modifications of this equipment also enhance the performance of the printing process. The aim of this review is to highlight the major fused deposition modeling critical process parameters in the pharmaceutical field and possible solutions in order to speed up the development of objects in the pharmaceutical market.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
Correlation of dynamic and steady flow viscosities
Cox, W. P., & Merz, E. H. (1958) · Journal of Polymer Science · doi:10.1002/pol.1958.1202811812 · Cited by 2,092
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Effect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,277
Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
On a General Relation Involving the Glass Temperature and Coefficients of Expansion of Polymers
Simha, R., & Boyer, R. F. (1962) · The Journal of Chemical Physics · doi:10.1063/1.1733201 · Cited by 827
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
Norman, J., Madurawe, R. D., Moore, C. M. V., Khan, M. A., & Khairuzzaman, A. (2017) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.001 · Cited by 810
Hancock, B. C., & Zografi, G. (1994) · Pharmaceutical Research · doi:10.1023/a:1018941810744 · Cited by 714
3D Printing in Pharmaceutical and Medical Applications – Recent Achievements and Challenges
Jamróz, W., Szafraniec, J., Kurek, M., & Jachowicz, R. (2018) · Pharmaceutical Research · doi:10.1007/s11095-018-2454-x · Cited by 707
Effect of geometry on drug release from 3D printed tablets
Goyanes, A., Robles Martinez, P., Buanz, A., Basit, A. W., & Gaisford, S. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.04.069 · Cited by 667
3D printing in pharmaceutics: A new tool for designing customized drug delivery systems
Goole, J., & Amighi, K. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.12.071 · Cited by 660
Fused-filament 3D printing (3DP) for fabrication of tablets
Goyanes, A., Buanz, A. B. M., Basit, A. W., & Gaisford, S. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.09.044 · Cited by 587
Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation
Patil, H., Tiwari, R. V., & Repka, M. A. (2016) · AAPS PharmSciTech · doi:10.1208/s12249-015-0360-7 · Cited by 584
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Goyanes, A., Buanz, A. B. M., Hatton, G. B., Gaisford, S., & Basit, A. W. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2014.12.003 · Cited by 570
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
Alhnan, M. A., Okwuosa, T. C., Sadia, M., Wan, K.-W., Ahmed, W., & Arafat, B. (2016) · Pharmaceutical Research · doi:10.1007/s11095-016-1933-1 · Cited by 554
Skowyra, J., Pietrzak, K., & Alhnan, M. A. (2015) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2014.11.009 · Cited by 530
Bone tissue engineering therapeutics: controlled drug delivery in three-dimensional scaffolds
Mouriño, V., & Boccaccini, A. R. (2010) · Journal of The Royal Society Interface · doi:10.1098/rsif.2009.0379 · Cited by 527
3D printing of tablets containing multiple drugs with defined release profiles
Khaled, S. A., Burley, J. C., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.07.067 · Cited by 508
Goyanes, A., Det-Amornrat, U., Wang, J., Basit, A. W., & Gaisford, S. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.05.034 · Cited by 490
Wang, P., Zou, B., Xiao, H., Ding, S., & Huang, C. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.03.016 · Cited by 458
3D Printing technologies for drug delivery: a review
Prasad, L. K., & Smyth, H. (2016) · Drug Development and Industrial Pharmacy · doi:10.3109/03639045.2015.1120743 · Cited by 454
Optimization of fused deposition modeling parameters for improved PLA and ABS 3D printed structures
Abeykoon, C., Sri-Amphorn, P., & Fernando, A. (2020) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2020.03.003 · Cited by 417
Melocchi, A., Parietti, F., Maroni, A., Foppoli, A., Gazzaniga, A., & Zema, L. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.05.036 · Cited by 409
A flexible-dose dispenser for immediate and extended release 3D printed tablets
Pietrzak, K., Isreb, A., & Alhnan, M. A. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2015.07.027 · Cited by 407
Forster, A., Hempenstall, J., Tucker, I., & Rades, T. (2001) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(01)00801-8 · Cited by 400
Coupling 3D printing with hot-melt extrusion to produce controlled-release tablets
Zhang, J., Feng, X., Patil, H., Tiwari, R. V., & Repka, M. A. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.12.049 · Cited by 393
Channelled tablets: An innovative approach to accelerating drug release from 3D printed tablets
Sadia, M., Arafat, B., Ahmed, W., Forbes, R. T., & Alhnan, M. A. (2018) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.11.022 · Cited by 368
Solid free-form fabrication of drug delivery devices
Wu, B. M., Borland, S. W., Giordano, R. A., Cima, L. G., Sachs, E. M., & Cima, M. J. (1996) · Journal of Controlled Release · doi:10.1016/0168-3659(95)00173-5 · Cited by 361
Yin, J., Lu, C., Fu, J., Huang, Y., & Zheng, Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.04.029 · Cited by 360
Goyanes, A., Fina, F., Martorana, A., Sedough, D., Gaisford, S., & Basit, A. W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.05.021 · Cited by 355
Garzon-Hernandez, S., Garcia-Gonzalez, D., Jérusalem, A., & Arias, A. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108414 · Cited by 350
Jaisingh Sheoran, A., & Kumar, H. (2020) · Materials Today: Proceedings · doi:10.1016/j.matpr.2019.11.296 · Cited by 342
Adhesion and Friction Mechanisms of Polymer-on-Polymer Surfaces
Maeda, N., Chen, N., Tirrell, M., & Israelachvili, J. N. (2002) · Science · doi:10.1126/science.1072378 · Cited by 337
Fabrication of controlled-release budesonide tablets via desktop (FDM) 3D printing
Goyanes, A., Chang, H., Sedough, D., Hatton, G. B., Wang, J., Buanz, A., Gaisford, S., & Basit, A. W. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.10.039 · Cited by 330
Sadia, M., Sośnicka, A., Arafat, B., Isreb, A., Ahmed, W., Kelarakis, A., & Alhnan, M. A. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.09.050 · Cited by 323
Low temperature fused deposition modeling (FDM) 3D printing of thermolabile drugs
Kollamaram, G., Croker, D. M., Walker, G. M., Goyanes, A., Basit, A. W., & Gaisford, S. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.04.055 · Cited by 318
Fused Deposition Modeling (FDM) 3D Printed Tablets for Intragastric Floating Delivery of Domperidone
Chai, X., Chai, H., Wang, X., Yang, J., Li, J., Zhao, Y., Cai, W., Tao, T., & Xiang, X. (2017) · Scientific Reports · doi:10.1038/s41598-017-03097-x · Cited by 316
Melocchi, A., Parietti, F., Loreti, G., Maroni, A., Gazzaniga, A., & Zema, L. (2015) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2015.07.016 · Cited by 299
Estimation of filament temperature and adhesion development in fused deposition techniques
Costa, S. F., Duarte, F. M., & Covas, J. A. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.02.026 · Cited by 293
Xue, C., Zhang, X., & Cai, W. (2017) · Pharmaceutics · doi:10.3390/pharmaceutics10010001 · Cited by 291
Kyobula, M., Adedeji, A., Alexander, M. R., Saleh, E., Wildman, R., Ashcroft, I., Gellert, P. R., & Roberts, C. J. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.06.025 · Cited by 288
Okwuosa, T. C., Pereira, B. C., Arafat, B., Cieszynska, M., Isreb, A., & Alhnan, M. A. (2017) · Pharmaceutical Research · doi:10.1007/s11095-016-2073-3 · Cited by 277
Solanki, N. G., Tahsin, M., Shah, A. V., & Serajuddin, A. T. M. (2018) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2017.10.021 · Cited by 272
Melt flow behaviour of poly-ε-caprolactone in fused deposition modelling
Ramanath, H. S., Chua, C. K., Leong, K. F., & Shah, K. D. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3203-6 · Cited by 239
Vithani, K., Goyanes, A., Jannin, V., Basit, A. W., Gaisford, S., & Boyd, B. J. (2019) · Pharmaceutical Research · doi:10.1007/s11095-018-2531-1 · Cited by 233
M3DISEEN: A novel machine learning approach for predicting the 3D printability of medicines
Elbadawi, M., Muñiz Castro, B., Gavins, F. K. H., Ong, J. J., Gaisford, S., Pérez, G., Basit, A. W., Cabalar, P., & Goyanes, A. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119837 · Cited by 220
Kim, J., Lin, B., Kim, S., Choi, B., Evseenko, D., & Lee, M. (2015) · Journal of Biological Engineering · doi:10.1186/1754-1611-9-1 · Cited by 211
3D printing of high drug loaded dosage forms using thermoplastic polyurethanes
Verstraete, G., Samaro, A., Grymonpré, W., Vanhoorne, V., Van Snick, B., Boone, M. N., Hellemans, T., Van Hoorebeke, L., Remon, J. P., & Vervaet, C. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.12.002 · Cited by 209
3D printing of a wearable personalized oral delivery device: A first-in-human study
Liang, K., Carmone, S., Brambilla, D., & Leroux, J.-C. (2018) · Science Advances · doi:10.1126/sciadv.aat2544 · Cited by 205
Genina, N., Boetker, J. P., Colombo, S., Harmankaya, N., Rantanen, J., & Bohr, A. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.10.003 · Cited by 204
A general method to improve 3D-printability and inter-layer adhesion in lignin-based composites
Nguyen, N. A., Bowland, C. C., & Naskar, A. K. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2018.03.009 · Cited by 195
Rheology as a tool for evaluation of melt processability of innovative dosage forms
Aho, J., Boetker, J. P., Baldursdottir, S., & Rantanen, J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.02.009 · Cited by 191
Pereira, B. C., Isreb, A., Forbes, R. T., Dores, F., Habashy, R., Petit, J.-B., Alhnan, M. A., & Oga, E. F. (2019) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2018.12.009 · Cited by 189
Isreb, A., Baj, K., Wojsz, M., Isreb, M., Peak, M., & Alhnan, M. A. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.04.017 · Cited by 177
3D printing: An appealing route for customized drug delivery systems
Elkasabgy, N. A., Mahmoud, A. A., & Maged, A. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119732 · Cited by 177
Kempin, W., Domsta, V., Grathoff, G., Brecht, I., Semmling, B., Tillmann, S., Weitschies, W., & Seidlitz, A. (2018) · Pharmaceutical Research · doi:10.1007/s11095-018-2405-6 · Cited by 172
Aho, J., Boetker, J. P., Genina, N., Edinger, M., Arnfast, L., & Rantanen, J. (2018) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2018.11.012 · Cited by 172
Modifying release characteristics from 3D printed drug-eluting products
Boetker, J. P., Water, J. J., Aho, J., Arnfast, L., Bohr, A., & Rantanen, J. (2016) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2016.03.013 · Cited by 168
Nasereddin, J., Wellner, N., Alhijjaj, M., Belton, P., & Qi, S. (2018) · Pharmaceutical Research · doi:10.1007/s11095-018-2432-3 · Cited by 166
Analysis of tensile strength of a fused filament fabricated PLA part using an open-source 3D printer
Rajpurohit, S. R., & Dave, H. K. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-3047-x · Cited by 165
A review of pharmaceutical extrusion: Critical process parameters and scaling-up
Thiry, J., Krier, F., & Evrard, B. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.12.036 · Cited by 165
Self-citationEvolution of PVA gels prepared without crosslinking agents as a cell adhesive surface
Gupta, S., Webster, T. J., & Sinha, A. (2011) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-011-4343-2 · Cited by 163
The Application of 3D Printing in the Formulation of Multilayered Fast Dissolving Oral Films
Ehtezazi, T., Algellay, M., Islam, Y., Roberts, M., Dempster, N. M., & Sarker, S. D. (2018) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2017.11.019 · Cited by 162
Saerens, L., Dierickx, L., Lenain, B., Vervaet, C., Remon, J. P., & Beer, T. D. (2010) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2010.09.015 · Cited by 161
Gupta, S. S., Solanki, N., & Serajuddin, A. T. M. (2016) · AAPS PharmSciTech · doi:10.1208/s12249-015-0426-6 · Cited by 160
Water, J. J., Bohr, A., Boetker, J., Aho, J., Sandler, N., Nielsen, H. M., & Rantanen, J. (2015) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24305 · Cited by 159
Korte, C., & Quodbach, J. (2018) · Pharmaceutical Development and Technology · doi:10.1080/10837450.2018.1433208 · Cited by 159
Ilyés, K., Kovács, N. K., Balogh, A., Borbás, E., Farkas, B., Casian, T., Marosi, G., Tomuță, I., & Nagy, Z. K. (2019) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2018.12.019 · Cited by 155
Material Considerations for Fused-Filament Fabrication of Solid Dosage Forms
Fuenmayor, E. A., Forde, M., Healy, A. V., Devine, D. M., Lyons, J. G., McConville, C., & Major, I. (2018) · Pharmaceutics · doi:10.3390/pharmaceutics10020044 · Cited by 148
An update on coating/manufacturing techniques of microneedles
Tarbox, T., Watts, A. B., Cui, Z., & Williams, R. O. (2017) · Drug Delivery and Translational Research · doi:10.1007/s13346-017-0466-4 · Cited by 145
Li, Q., Wen, H., Jia, D., Guan, X., Pan, H., Yue, Y., Yu, S., Zhu, Z., Xiang, R., & Pan, W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.03.066 · Cited by 135
3D Printing Factors Important for the Fabrication of Polyvinylalcohol Filament-Based Tablets
Tagami, T., Fukushige, K., Ogawa, E., Hayashi, N., & Ozeki, T. (2017) · Biological and Pharmaceutical Bulletin · doi:10.1248/bpb.b16-00878 · Cited by 131
Vo, A. Q., Zhang, J., Nyavanandi, D., Bandari, S., & Repka, M. A. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116519 · Cited by 127
Chen, H., Yang, X., Chen, L., Wang, Y., & Sun, Y. (2016) · Scientific Reports · doi:10.1038/srep19207 · Cited by 123
Giri, B. R., Song, E. S., Kwon, J., Lee, J., Park, J.-B., & Kim, D. W. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12010077 · Cited by 120
Shear Fracture in Cone‐Plate Rheometry
Tanner, R. I., & Keentok, M. (1983) · Journal of Rheology · doi:10.1122/1.549698 · Cited by 118
A review on recent advancements in fused deposition modeling
Veeman, D., Kumar, K. P., Ram, P. M. B., Ravichandran, M., & Vinayagamoorthy, M. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.12.036 · Cited by 113
The performance of the hot end in a plasticating 3D printer
Mackay, M. E., Swain, Z. R., Banbury, C., Phan, D. D., & Edwards, D. A. (2017) · Journal of Rheology · doi:10.1122/1.4973852 · Cited by 101
Melocchi, A., Uboldi, M., Cerea, M., Foppoli, A., Maroni, A., Moutaharrik, S., Palugan, L., Zema, L., & Gazzaniga, A. (2020) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2020.07.011 · Cited by 99
Zhang, J., Xu, P., Vo, A. Q., Bandari, S., Yang, F., Dürig, T., & Repka, M. A. (2019) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2019.04.043 · Cited by 88
Carlier, E., Marquette, S., Peerboom, C., Denis, L., Benali, S., Raquez, J., Amighi, K., & Goole, J. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.05.008 · Cited by 87
Moradi, M., Meiabadi, M. S., & Kaplan, A. F. H. (2019) · Metals and Materials International · doi:10.1007/s12540-019-00272-9 · Cited by 85
Ponsar, H., Wiedey, R., & Quodbach, J. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12060511 · Cited by 85
Qi, S., Belton, P., Nollenberger, K., Clayden, N. J., Reading, M., & Craig, D. Q. M. (2010) · Pharmaceutical Research · doi:10.1007/s11095-010-0185-8 · Cited by 81
Thiry, J., Lebrun, P., Vinassa, C., Adam, M., Netchacovitch, L., Ziémons, E., Hubert, P., Krier, F., & Évrard, B. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.10.003 · Cited by 79
Use of 3D Printing by Museums: Educational Exhibits, Artifact Education, and Artifact Restoration
Short, D. B. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0030 · Cited by 77
Nober, C., Manini, G., Carlier, E., Raquez, J., Benali, S., Dúbois, P., Amighi, K., & Goole, J. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.118581 · Cited by 74
Prasad, E., Islam, M. T., Goodwin, D., Megarry, A. J., Halbert, G., Florence, A. J., & ROBERTSON, J. G. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.06.027 · Cited by 70
Formulation strategies for solid oral dosage form using 3D printing technology: A mini-review
Khatri, P., Shah, M. K., & Vora, N. (2018) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2018.05.009 · Cited by 66
Jennotte, O., Koch, N., Lechanteur, A., & Évrard, B. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119200 · Cited by 56
Self-citationThiry, J., Kok, M. G. M., Collard, L., Frère, A., Krier, F., Fillet, M., & Évrard, B. (2016) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2016.12.001 · Cited by 55
Zhang, X., & Wang, J. (2019) · Chemical Physics Letters · doi:10.1016/j.cplett.2019.136959 · Cited by 45
Ilyés, K., Balogh, A., Casian, T., Igricz, T., Borbás, E., Démuth, B., Vass, P., Menyhárt, L., Kovács, N. K., Marosi, G., et al. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.06.024 · Cited by 44
Near-infrared chemical imaging (NIR-CI) of 3D printed pharmaceuticals
Khorasani, M. R., Edinger, M., Raijada, D. K., Boetker, J. P., Aho, J., & Rantanen, J. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.09.075 · Cited by 42
Saerens, L., Segher, N., Vervaet, C., Remon, J. P., & Beer, T. D. (2013) · Analytica Chimica Acta · doi:10.1016/j.aca.2013.11.020 · Cited by 38
Culbreath, C. J., Gaerke, B., Taylor, M. S., McCullen, S. D., & Mefford, O. T. (2020) · Materialia · doi:10.1016/j.mtla.2020.100732 · Cited by 31
Novák, M., Boleslavská, T., Grof, Z., Waněk, A., Zadražil, A., Beránek, J., Kovačík, P., & Štĕpánek, F. (2018) · AAPS PharmSciTech · doi:10.1208/s12249-018-1176-z · Cited by 22
Ariffin, A. B., Ariff, Z. M., & Jikan, S. S. (2011) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684411399140 · Cited by 19
Swain, R. P., & Subudhi, B. B. (2017) · Drug Development and Industrial Pharmacy · doi:10.1080/03639045.2017.1371739 · Cited by 12
Cited by
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Metadata
- Authors
- Parulski, C., Jennotte, O., Lechanteur, A., & Evrard, B.
- Venue
- Advanced Drug Delivery Reviews
- Publisher
- Elsevier BV
- Published
- 2021-08
- Volume
- 175
- Pages
- 113810
- ISSN
- 0169-409X (ISSN-L)
- OpenAlex
- W3164215249
- Cited by
- 183
- References
- 101
- FWCI
- 2.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.