Cited by 1,188Battery Modeling and ManagementAdvancements in Battery MaterialsElectric and Hybrid Vehicle Technologies

The DOI matches its Crossref record; 137 of the 140 references it cites were found in a registry or an index.

A comprehensive review of lithium-ion batteries used in hybrid and electric vehicles at cold temperatures

Open access

Jaguemont, J., Boulon, L., Dubé, Y.·2016·Applied Energy

DOI 10.1016/j.apenergy.2015.11.034

Open this paper in CoChat — free account

Integrity signals

Registry

Crossref · 10.1016/j.apenergy.2015.11.034

Cites

137 of 137 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

CRC Handbook of Chemistry and Physics
(2014) · doi:10.1201/b17118 · Cited by 57,706
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
A General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548
Accurate electrical battery model capable of predicting runtime and I-V performance
Chen, M., & Rincon-Mora, G. A. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2006.874229 · Cited by 2,427
Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs
Plett, G. L. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.02.032 · Cited by 1,927
Handbook Of Batteries
Linden, D. (2001) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,900
Enhanced coulomb counting method for estimating state-of-charge and state-of-health of lithium-ion batteries
Ng, K. S., Moo, C.-S., Chen, Y.-P., & Hsieh, Y.-C. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.11.021 · Cited by 1,636
Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells
Doyle, M., Newman, J., Góźdź, A. S., Schmutz, C. N., & Tarascon, J. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836921 · Cited by 1,572
Abuse behavior of high-power, lithium-ion cells
Spotnitz, R. M., & Franklin, J. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00488-3 · Cited by 1,419

Show all 140 references

Research works printed but not linked: 5

Peukert, 1897, Über die Abhängigkeit der Kapazität von der Entladestromstärke bei Bleiakkumulatoren, Elektrotechnische Zeitschrift (ETZ), 18, 287
González-longatt FM. Circuit based battery models: a review. In: Congr iberoam. estud ing eléctrica; 2006.
Daowd M, Omar N, Verbrugge B, Van Den Bosschev P, Van Mierlo J. Battery models parameter estimation based on matlab/simulink®. In: 25th world batter. hybrid fuel cell electr veh symp exhib batter, vol. 2; 2010. p. 5–9.
Drive A, Poll S, Field M, Goebel K, Christophersen J. An integrated approach to battery health monitoring. In: Autotestcon, 2007 IEEE; 2007. p. 646–53.
Pesaran AA, Burch S, Keyser M. An approach for designing thermal management systems for electric and hybrid vehicle battery packs preprint. In: Fourth veh therm manag syst conf exhib, no. January; 1999.

Sorted by citations

Items 601–700 of 1,000

Na adsorption on bismuthene monolayer for battery applications: A first-principles study
Marjaoui, A., Zanouni, M., Kasmi, A. E., Jbilou, M., & Diani, M. (2021) · FlatChem · doi:10.1016/j.flatc.2021.100251 · Cited by 17
A vapor compression-adsorption thermal management system for electric vehicle: Concept and working fluid pairs
Pan, Q., He, S., Liu, H., & Wang, R. Z. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.114168 · Cited by 17
Modeling of discharge voltage for lithium-ion batteries through orthogonal experiments at subzero environment
Meng, H., Li, Y., & Zhang, C. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105058 · Cited by 17
Simulation of an electric vehicle to study the impact of cabin heating on the driving range
Ramsey, D., Bouscayrol, A., Boulon, L., & Vaudrey, A. (2020) · 2020 IEEE 91st Vehicular Technology Conference (VTC2020-Spring) · doi:10.1109/vtc2020-spring48590.2020.9129169 · Cited by 20
Self-citation
Comparison of equivalent circuit battery models for energetic studies on electric vehicles
Ramsey, D., German, R., Bouscayrol, A., & Boulon, L. (2020) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc49601.2020.9330891 · Cited by 16
Self-citation
Low Temperature, Current Dependent Battery State Estimation Using Interacting Multiple Model Strategy
Messing, M., Rahimifard, S., Shoa, T., & Habibi, S. (2021) · IEEE Access · doi:10.1109/access.2021.3095938 · Cited by 13
“The behavior of the battery changes considerably at low temperatures [2] and to account for that, model parameters are adjusted for different temperatures.”
Background
Micro-macroscopic modeling of a lithium-ion battery by considering grain boundaries of active materials
Sarkar, S., Hoffmann, J. A., & Park, J. (2021) · Electrochimica Acta · doi:10.1016/j.electacta.2021.139052 · Cited by 16
The influence of inclement weather on electric bus efficiency: Evidence from a developed European network
Corbet, S., Larkin, C. J., & McCluskey, J. (2023) · Case Studies on Transport Policy · doi:10.1016/j.cstp.2023.100971 · Cited by 16
Coupling simulation of the cooling air duct and the battery pack in battery energy storage systems
Zhu, X., Xu, X., Kong, B., Wang, J., Shi, H. G., & Jiang, Y. (2023) · Physica Scripta · doi:10.1088/1402-4896/acd824 · Cited by 16
Enhancing low-temperature characteristics of graphite anode by comprehensive modification of electrolyte
Rakhatkyzy, M., Belgibayeva, A., Kalimuldina, G., Nurpeissova, A., & Bakenov, Z. (2023) · Electrochemistry Communications · doi:10.1016/j.elecom.2023.107606 · Cited by 15
The Macromolecular Design of Poly(styrene-isoprene-styrene) (SIS) Copolymers Defines their Performance in Flexible Electrothermal Composite Heaters
Dedduwakumara, H. T., Barner‐Kowollik, C., Dubal, D. P., & Boase, N. R. B. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c19541 · Cited by 16
Sustainable Electric Micromobility Through Integrated Power Electronic Systems and Control Strategies
Krichi, M., Noman, A. M., Fannakh, M., Raffak, T., & Haidar, Z. A. (2025) · Energies · doi:10.3390/en18082143 · Cited by 16
“…Moderate [92] Low [115] Very low [115] Low [89] Very low [91] Low [109] E-bikes, e-scooters, EVs, ESS [92] Tools, backup [116] EVs, storage [131] Micromobility,ESS[127,129] E-scooters,storage[90,95] ESS, renewable buffering, industrial use [109,115,117] Table 14 summarizes the common usage…”
Lithium-ion battery capacity fading dynamics modelling for formulation optimization: A stochastic approach to accelerate the design process
Tao, L., Cheng, Y., Lü, C., Su, Y., Chong, J., Jin, H., Lin, Y., & Noktehdan, A. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.04.027 · Cited by 16
Cooperative effect of passive insulation and active liquid cooling for enhanced thermal runaway suppression in large-format batteries
Xie, N., Yang, M., Chen, G., Lai, Z., Zhu, L., Xie, Z., Wang, S., & Zhang, Y. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.116962 · Cited by 15
Next-generation battery energy management systems in electric vehicles: An overview of artificial intelligence
Kumar, N., & Prabhansu (2025) · Future Batteries · doi:10.1016/j.fub.2025.100087 · Cited by 16
Safety and performance implications of lithium plating induced by sub-zero temperature cycling of lithium-ion batteries
Kirchner-Burles, C., Fordham, A., Reid, H. T., Johnson, M. J., Buckwell, M., Iacoviello, F., Coke, K., Jervis, R., Hinds, G., Shearing, P. R., et al. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238565 · Cited by 17
Analyzing well-to-pump emissions of electric and conventional jet fuel for aircraft propulsion
Yıldız, M., Kale, U., & Nagy, A. (2022) · Aircraft Engineering and Aerospace Technology · doi:10.1108/aeat-02-2021-0032 · Cited by 15
A Review on Aging-Aware System Simulation for Plug-In Hybrids
Frambach, T., Liedtke, R., Dechent, P., Sauer, D. U., & Figgemeier, E. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3104105 · Cited by 15
“High temperatures increase the damaging chemical reaction rate, whereas low temperatures increase lithium plating [24], [70].”
BackgroundInfluential
Coal-derived graphene foam and micron-sized silicon composite anodes for lithium-ion batteries
Zhang, X., Wang, H., Ilango, P. R., Mann, M. D., & Hou, X. (2022) · Electrochimica Acta · doi:10.1016/j.electacta.2022.141329 · Cited by 15
Cavity structure-based active controllable thermal switch for battery thermal management
Wang, X., Guo, Z., Xu, J., Shi, C., Zhang, X., Lv, Q., & Mei, X. (2023) · iScience · doi:10.1016/j.isci.2023.108419 · Cited by 15
Influence of Pressure, Temperature and Discharge Rate on the Electrical Performances of a Commercial Pouch Li-Ion Battery
Aiello, L., Ruchti, P., Vitzthum, S., & Coren, F. (2024) · Batteries · doi:10.3390/batteries10030072 · Cited by 15
“These in turn affect its capacity, internal impedance, maximum charge-discharge rates, overall efficiency and operational life-span [3,10–13].”
Impact of Active Particle in Lithium-Ion Battery Probed by a Microstructure Resolved Model
Akbar, A., Weng, J., Zhang, X., Li, P., Ye, G., & Zhou, X. (2024) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.4c00473 · Cited by 15
Enhancing control disorder and implementing V2X-Based suppression methods for electric vehicle CO2 thermal management systems
Jia, F., Yin, X., Cao, F., Cui, C., Fang, J., & Wang, X. (2024) · eTransportation · doi:10.1016/j.etran.2024.100336 · Cited by 15
Designing an efficient all-climate carbonate-based electrolyte facilitating commercial pouch sodium-ion batteries
Li, S., Luo, Y., Lu, Z., Qiu, H., He, X. H., Fan, W., Wang, W., & Nan, J. (2025) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2025.04.005 · Cited by 15
Preparation and Electrochemical Properties of Li3V2(PO4)3−xBrx/Carbon Composites as Cathode Materials for Lithium-Ion Batteries
Cao, X., Mo, L., Zhu, L., & Xie, L. (2017) · Nanomaterials · doi:10.3390/nano7030052 · Cited by 15
Polymer Electrolyte Enlightens Wide-Temperature 4.45 V-Class LiCoO2/Li Metal Battery
Zhang, M., Zhang, J., Yang, J., Du, X., Chen, Z., Chen, K., Lu, C., Zhang, H., Dong, T., Li, J., et al. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.1501910jes · Cited by 15
A comparative study of Na3LiTi5O12 and Li4Ti5O12: Geometric and electronic structures obtained by density functional theory calculations
Tada, K., Kitta, M., Ozaki, H., & Tanaka, S. (2019) · Chemical Physics Letters · doi:10.1016/j.cplett.2019.136598 · Cited by 15
Thermal behavior of lithium‐ion battery in microgrid application: Impact and management system
Hasani, A. H., Mansor, M., Ramachandaramurthy, V. K., Zuhdi, A. W. M., Ying, Y. J., Hannan, M. A., Hamid, F. A., Rahman, M. S. A., & Salim, N. A. (2020) · International Journal of Energy Research · doi:10.1002/er.6229 · Cited by 16
“This leads to the decrease of charge capacity of the battery as the lithium intercalation process is interfered and loss of lithium occurred.(35,38) Lithium plating causes severe performance degradation where continuous cycling will cause the battery to reach the end of life (EOL) after 90 to 140 cycles, depending on…”
Background
A Statistical Design Approach on Electrochemical Impedance Spectroscopy of NMC Li-Ion Battery
Erol, S. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac9553 · Cited by 15
Optimal charge current of lithium ion battery
Chu, Z., Feng, X., Ouyang, M., Wang, Z., Lu, L., Li, J., & Han, X. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.12.577 · Cited by 15
Thermal interface materials for thermal management of microelectronic devices: a review
Chakarvarti, S. K., Gehlawat, D., & Manocha, A. (2025) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-025-14255-z · Cited by 14
Ultra-fine Sb2S3 particles encapsulated in activated-carbon: A high-performance anode for Li-ion batteries
Du, Y.-Y., Liu, F., Jiang, L., Jia, M., & Zhang, Z. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.164469 · Cited by 14
A review on battery thermal management and its digital improvement‐based cyber hierarchy and interactional network
Zhang, Y., Liang, F., Li, S., Zhang, C., Zhang, S., Liu, X., Zhao, S., Yang, S., Xia, Y., Lin, J., et al. (2022) · International Journal of Energy Research · doi:10.1002/er.7957 · Cited by 14
“By increasing the discharge rate and lowering the cut-off voltage of DC preheating, that is, prolonging the discharging time, the heating rate can be increased.(147) AC preheating method applies AC of a specific frequency and amplitude to the cathode and anode of the cell, and the heat is generated from the internal i…”
Method
One‐Shot Active Learning for Globally Optimal Battery Electrolyte Conductivity**
Rahmanian, F., Vogler, M., Wölke, C., Yan, P., Winter, M., Cekic-Laskovic, I., & Stein, H. (2022) · Batteries & Supercaps · doi:10.1002/batt.202200228 · Cited by 12
Modeling and Experimental Determination of Lithium-Ion Battery Degradation in Hot Environment
Almutairi, Z. A., Eltamaly, A. M., Khereiji, A. E., Nassar, A. A., Rished, A. A., Saheel, N. A., Marqabi, A. A., Hamad, S. A., Harbi, M. A., Sherif, R., et al. (2022) · International Middle East Power Systems Conference (MEPCON) · doi:10.1109/mepcon55441.2022.10021809 · Cited by 15
“Meanwhile, the low temperature (below 10C) resists the movements of the Lithium-ions materials used in the electrolyte and/or the electrodes which may cause plating of lithium on the graphite [20].”
Background
A S-phenyl Benzenethiosulfonate (SPBS)-containing electrolyte enhances the temperature performance of LiNi0.8Co0.1Mn0.1O2/graphite batteries by regulating the electrode interfaces
Li, H., Zeng, X., He, X. H., Wang, W., Fan, W., Fan, C., Ma, Z., & Nan, J. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233441 · Cited by 14
Li3PO4-Coated Graphite Anode for Thermo-Electrochemically Stable Lithium-Ion Batteries
Sung, J. H., Kim, T., Kim, S., Hasan, F., Mohanty, S. K., Srinivasa, M. K., Reddy, S. C., & Yoo, H. D. (2023) · Energies · doi:10.3390/en16176141 · Cited by 14
Analysis and Modeling of Calendar Aging and Cycle Aging of LiCoO2/Graphite Cells
Wang, W., Yuan, B., Sun, Q., & Wennersten, R. (2024) · Journal of Thermal Science · doi:10.1007/s11630-024-1918-z · Cited by 14
“Regarding the influence of temperature, most studies have been performed at the temperatures higher than 25°C and only a few were performed at low temperatures [27].”
Usage factors influencing e-scooter energy consumption: An empirical investigation
Gioldasis, C., Christoforou, Z., & Katsiadrami, A. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.142165 · Cited by 14
Temperature field spatiotemporal modeling of lithium-ion battery pack configured sparse temperature sensors
Zhao, X., Sun, B., Zhang, W., He, X., Ma, S., & Zhang, J. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113005 · Cited by 15
Ultrasonic spectroscopy for in situ early detection and dynamic monitoring of lithium plating in lithium-ion batteries
Xu, W., Li, L., Shi, F., & Chen, Q. (2025) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2025.102507 · Cited by 19
Crash analysis of lithium-ion batteries using finite element based neural search analytical models
Vijayaraghavan, V., Li, S., Garg, A., Peng, X., & Singh, V. P. (2018) · Engineering With Computers · doi:10.1007/s00366-018-0587-5 · Cited by 14
Thermal performance of Lithium-Ion battery pack using forced air circulation system
Bibin, C., Devan, P. K., Kumar, S. S., Soundararajan, G., Sheeja, R., Kanthavelkumaran, N., Gobinath, S., & Ashok, K. G. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.01.823 · Cited by 14
Temperature‐Field Sparse‐Reconstruction of Lithium‐Ion Battery Pack Based on Artificial Neural Network and Virtual Thermal Sensor Technology
Fang, Z., Wang, M., Hu, W., Chang, K., & Zhang, B. (2021) · Energy Technology · doi:10.1002/ente.202100258 · Cited by 14
Drone Relay Stations for Supporting Wireless Communication in Military Operations
Kim, S., Lim, G. J., & Cho, J. (2017) · Advances in intelligent systems and computing · doi:10.1007/978-3-319-60384-1_12 · Cited by 14
Electrified Location Routing Problem with Energy Consumption for Resources Restricted Archipelagos: Case of Buyukada
Hülagü, S., & Çelikoğlu, H. B. (2020) · IEEE Forum on Integrated and Sustainable Transportation Systems (FISTS) · doi:10.1109/fists46898.2020.9264865 · Cited by 14
Development of a lifetime model for large format nickel-manganese-cobalt oxide-based lithium-ion cell validated using a real-life profile
Kebede, A. A., Hosen, M. S., Messagie, M., Behabtu, H. A., Jemal, T., Mierlo, J. V., Coosemans, T., & Berecibar, M. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104289 · Cited by 14
Steady-state and dynamic experimental study of an enhanced automotive thermal management system based on energy cascade utilization
Jia, F., Yin, X., He, S., Cao, Z., Fang, J., Cao, F., & Wang, X. (2025) · Energy · doi:10.1016/j.energy.2025.134542 · Cited by 13
Electrifying end-use demands: A rise in capacity and flexibility requirements
Knittel, T., Lowry, C., McPherson, M., Wild, P. M., & Rowe, A. M. (2025) · Energy · doi:10.1016/j.energy.2025.135373 · Cited by 13
Temperature-dependent multi-physical modeling strategy and safety optimization of lithium-ion battery under mechanical abuses
Hu, L., Yan, J. Y., Zhou, M., & Wei, H. (2025) · Energy · doi:10.1016/j.energy.2025.136682 · Cited by 13
Advances and challenges in obtaining internal temperature for lithium-ion batteries
Dong, T., Huang, L., Liu, J., Kuang, Z.-L., Sun, W.-X., Wu, H.-Y., & Cao, W.-J. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.237571 · Cited by 11
Advances in internal temperature measurement and estimation for lithium-ion batteries
Chen, S., Shen, Y., Li, D.-S., Tian, G.-H., Li, Y., Ma, X., & Shuai, S. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.118950 · Cited by 11
Multi-Physics Digital Twin Models for Predicting Thermal Runaway and Safety Failures in EV Batteries
Babu, V. K. R., Veerendra, A. S., Gandla, S., & Manjunatha, Y. R. (2025) · Automation · doi:10.3390/automation6040092 · Cited by 13
“Representative frameworks typically embed the energy conservation statement, incorporating terms for Joule dissipation, reversible heat evolution, and the enthalpy linked to reaction progression [15].”
Coordination chemistry engineering of cool sodium electrolyte system: what's next?
Huang, R., Luo, S., Shi, Z., Qian, L., Liu, X., & Yan, S. (2025) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2025.217547 · Cited by 13
Sensor Placement With Optimal Precision for Temperature Estimation of Battery Systems
Deshpande, V. M., Bhattacharya, R., & Subbarao, K. (2021) · IEEE Control Systems Letters · doi:10.1109/lcsys.2021.3089564 · Cited by 13
Carbon coated Co(PO3)2/CoSe2 heterostructure as high performance sodium storage anode
Shi, X., Li, G., Liu, X., Li, J., Zhang, X., & Guo, J. (2023) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2023.169989 · Cited by 13
Advantages of a Solid Solution over Biphasic Intercalation for Vanadium-Based Polyanion Cathodes in Na-Ion Batteries
Komayko, A. I., Shraer, S. D., Fedotov, S. S., & Nikitina, V. A. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c08915 · Cited by 13
Development of Novel MSCCCTCV Charging Strategy for Health-Aware Battery Fast Charging Using QOGA Optimization
Bose, B., Garg, A., Gao, L., Kim, J., & Singh, S. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3314216 · Cited by 13
“Traditionally, it is widely accepted that augmenting the charging rate results in elevated temperature, reduced cycle life, and amplified degradation [27], [28], [29].”
Background
Analysis of fuel economy reduction factors of hybrid electric vehicles in winter using on-road driving data
Choi, M., Cha, J., & Song, J. (2023) · Energy · doi:10.1016/j.energy.2023.129977 · Cited by 13
Influence of latent heat based passive cooling on the performance of EV battery under automotive drive cycles
Nicholls, R. A., Moghimi, M. A., & Griffiths, A. L. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109924 · Cited by 13
Low-Temperature Structural Battery Electrolytes Produced by Polymerization-Induced Phase Separation
Deshpande, S., Vidyaprakash, V., Oka, S. S., Dasari, S. S., Liu, K., Wang, C., Lutkenhaus, J. L., & Green, M. J. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c00485 · Cited by 14
Scientific mapping and review of the research landscape in battery thermal management strategies using heat pipe
Kumar, M., Khan, S. Y., Liu, S., Zaidi, A. A., Zhang, S., Sohrabi, A., & Rashidov, J. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.114147 · Cited by 13
Optimization of lithium-ion battery pack thermal performance: A study based on electrical, design and discharge parameters
Mishra, S., Mishra, S., & Devanuri, J. K. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.125071 · Cited by 13
Experimental investigation and mechanistic analysis of temperature-dependent fractures and failure of lithium-ion battery under indentation loads
Zhou, M., Wei, H., Hu, L., Yan, J. Y., & Fu, M. (2025) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2025.111064 · Cited by 13
Feasibility Study for Sustainable Use of Lithium-Ion Batteries Considering Different Positive Electrode Active Materials under Various Driving Cycles by Using Cell to Electric Vehicle (EV) Simulation
Choi, H., Lim, N.-G., Lee, S. J., & Park, J. (2020) · Sustainability · doi:10.3390/su12229764 · Cited by 13
“[28] On the other hand, as the temperature increases, the chemical reaction becomes more active and the capacity decrease is smaller.”
Background
Lithium-Ion Capacitor: Analysis of Thermal Behavior and Development of Three-Dimensional Thermal Model
Berckmans, G. J., Ronsmans, J., Jaguemont, J., Samba, A., Omar, N., Hegazy, O., Soltani, M., Firouz, Y., den Bossche, P. V., & Mierlo, J. V. (2017) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4037491 · Cited by 13
Self-citation
A New Consideration for Validating Battery Performance at Low Ambient Temperatures
Tripathy, Y., McGordon, A., & Low, C. T. J. (2018) · Energies · doi:10.3390/en11092439 · Cited by 13
“This discrepancy may affect thermal management strategies when it comes to real-world automotive applications [43,44].”
Background
Experimental Verification of the Effect of Uncoordinated Charging of Electric Vehicles on Power Grids
Faddel, S., Elsayed, A., Youssef, T. A., & Mohammed, O. A. (2019) · IEEE Power & Energy Society Innovative Smart Grid Technologies Conference (ISGT) · doi:10.1109/isgt.2019.8791580 · Cited by 13
“the battery [16].”
Transformation of diffusive to capacitive kinetics in nanoscale modified Co-TiO2@CNTs composites safeguarding steady reversible capacity as sodium-ion battery anode
Rehman, A. U., Ali, G., Bilal, M., Zahid, M., Bashir, S., Kalam, A., Iqbal, J., Qayyum, M. A., Wageh, S., & Abbas, S. M. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.163772 · Cited by 13
Shared Autonomous Electric Vehicles and the Power Grid: Applications and Research Challenges
Pruckner, M., & Eckhoff, D. (2020) · IEEE PES Innovative Smart Grid Technologies Europe · doi:10.1109/isgt-europe47291.2020.9248844 · Cited by 12
“buses or lorries) will suffer from the effects of battery aging [26].”
Background
Boosting the electrochemical performance of lithium titanate at sub-zero temperature with Mo, S doping, and addition of MXene
Pu, Z., Li, H., Yang, Z., Zhang, Y., Liu, Y., Dong, G., & Li, Y. (2022) · Materials Today Chemistry · doi:10.1016/j.mtchem.2022.101145 · Cited by 13
A prototype of high-performance two-electron non-aqueous organic redox flow battery operated at −40 °C
Liang, Z., Jha, R. K., Suduwella, T. M., Attanayake, N. H., Wang, Y., Zhang, W., Cao, C., Kaur, A. P., Landon, J., & Odom, S. A. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta07876g · Cited by 12
Combined single-pedal and low adhesion control systems for enhanced energy regeneration in electric vehicles: Modeling, simulation, and on-field test
Li, S., Xu, L., Du, X., Wang, N., Feng, L., & Abdelkareem, M. A. A. (2023) · Energy · doi:10.1016/j.energy.2023.126982 · Cited by 12
Comparing the Cold-Cranking Performance of Lead-Acid and Lithium Iron Phosphate Batteries at Temperatures below 0 °C
Bauknecht, S., Wätzold, F., Schlösser, A., & Kowal, J. (2023) · Batteries · doi:10.3390/batteries9030176 · Cited by 10
Toward the Improvement of Silicon-Based Composite Electrodes via an In-Situ Si@C-Graphene Composite Synthesis for Li-Ion Battery Applications
Méry, A., Chenavier, Y., Marcucci, C., Benayad, A., Alper, J. P., Dubois, L., Haon, C., Herlin‐Boime, N., Sadki, S., & Duclairoir, F. M. A. (2023) · Materials · doi:10.3390/ma16062451 · Cited by 12
Is Banning Fossil-Fueled Internal Combustion Engines the First Step in a Realistic Transition to a 100% RES Share?
Danieli, P., Masi, M., Lazzaretto, A., Carraro, G., Cin, E. D., & Volpato, G. (2023) · Energies · doi:10.3390/en16155690 · Cited by 13
Enabling Extreme Low-Temperature (≤ -100 °C) Battery Cycling with Niobium Tungsten Oxides Electrode and Tailored Electrolytes.
Kim, S., Zhang, Y.-Z., Wang, H.-Y., Adams, T. E., & Pol, V. (2023) · Small · doi:10.1002/smll.202306438 · Cited by 17
Nanofluids and Ionic Fluids as Liquid Electrodes: An Overview on Their Properties and Potential Applications
Pereira, J. E. C. H., de Souza, R. R., Moita, A., & Moreira, A. L. N. (2023) · Processes · doi:10.3390/pr11113189 · Cited by 12
Numerical Analysis of the Thermal Management Strategies of Electric Vehicle Battery: A Review
Paval, P. S., Sharma, T. K., Mallisetty, P. K., Chandrakanth, B., & Reddy, T. S. (2024) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-024-10068-9 · Cited by 12
“…of LIBs over the operating cycle declines the performance leading to critical safety issues, where elevated temperature causes electrolyte decomposition [8] and thermal runaway leading to an explosion of batteries [9], and extremely low temperatures suppress the energy and battery power [10, 11].”
Chemical hazard assessment toward safer electrolytes for lithium-ion batteries
Schwaebe, B., He, H., Glaubensklee, C., Ogunseitan, O. A., & Schoenung, J. M. (2024) · Integrated Environmental Assessment and Management · doi:10.1002/ieam.4963 · Cited by 11
“Lithium ‐ ion batteries have revolutionized energy storage for portable electronic devices and are now revolutionizing stationary energy storage ca - pacity and human transportation through their use in bat - teries and electric vehicles (Jaguemont et al., 2016; Ziegler & Trancik, 2021).”
Holistic Testing and Characterization of Commercial 18650 Lithium-Ion Cells
Zatta, N., Cesaro, B. D., Cin, E. D., Carraro, G., Cristofoli, G., Trovò, A., Lazzaretto, A., & Guarnieri, M. (2024) · Batteries · doi:10.3390/batteries10070248 · Cited by 12
“Proper and safe module operation is ensured by the battery management system (BMS), whose effective design calls for an accurate and physically consistent electrical and thermal model of the Li-ion pack [7].”
Background
Digital Transformation and AI in Energy Systems: Applications, Challenges, and the Path Forward
Olson, E. (2024) · Palgrave studies in digital business & enabling technologies · doi:10.1007/978-3-031-61749-2_4 · Cited by 17
Predicting Automotive Battery Degradation Trajectories Using Transformer With Variational Auto-Encoder Based Data Augmentation
Xiang, H., Wang, Y., Soo, Y., Xiong, X., & Chen, Z. (2025) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2025.3545118 · Cited by 12
“On the other hand, the higher temperatures in summer enhance lithium-ion mobility, leading to less pronounced capacity degradation and even temporary capacity recovery in some cases [32], [33].”
Zinc Stannate as anode and Pyrrolidinium-Based Room Temperature Ionic Liquid as electrolyte for Lithium-ion Cells
Quezada, D., Honores, J. S., & Ruiz-León, D. (2021) · International Journal of Electrochemical Science · doi:10.20964/2021.02.34 · Cited by 12
Comparative Life Cycle Assessment of Lithium-Ion Capacitors Production from Primary Ore and Recycled Minerals
Chigada, P. I., Wale, O., Hancox, C. C., Vandaele, K., Breeze, B. A., Mottram, A., & Roberts, A. J. (2021) · Johnson Matthey Technology Review · doi:10.1595/205651321x16165776867357 · Cited by 12
Seamlessly Merging the Capacity of P into Sb at Same Voltage with Maintained Superior Cycle Stability and Low‐temperature Performance for Li‐ion Batteries
Wei, Y., He, J., Zhang, J., Ou, M., Guo, Y., Chen, J., Zeng, C., Xu, J., Han, J., Zhai, T., et al. (2021) · Energy & environment materials · doi:10.1002/eem2.12336 · Cited by 12
A closed-loop control on temperature difference of a lithium-ion battery by pulse heating in cold climates
Du, X.-Z., Zhao, L., Yang, Z.-G., & Jin, Z.-Y. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2022.106311 · Cited by 10
Fuzzy Logic Control of External Heating System for Electric Vehicle Batteries at Low Temperature
Zhang, S., Li, T., & Chen, L. (2023) · World Electric Vehicle Journal · doi:10.3390/wevj14040099 · Cited by 12
Thermal management system in electric vehicle batteries for environmental sustainability
Bibin, C., Rajendran, A. K., Kumar, A. V., Velayutham, B. K., Rajendran, A. K., Mohan, A., Naveen, S., & Madhu, S. (2023) · Environmental Quality Management · doi:10.1002/tqem.22001 · Cited by 12
Enhancing battery performance by nano Si addition to Li4Ti5O12 as anode material on lithium-ion battery
Firnadya, S. A., Zulfia, A., & Subhan, A. (2017) · Ionics · doi:10.1007/s11581-017-2284-6 · Cited by 12
The Aging Law of Low Temperature Charging of Lithium-Ion Battery
You, H., Dai, H., & Li, L. (2019) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2019-01-1204 · Cited by 12
High-performance Na3V2(PO4)3/C cathode for efficient low-temperature lithium-ion batteries
Mukushev, I., Tyan, Y., Kalimuldina, G., Mukanova, A., Jakupova, Z., Kim, S.-S., Bakenov, Z., & Nurpeissova, A. (2025) · NPG Asia Materials · doi:10.1038/s41427-025-00591-x · Cited by 11
“The main reason for the performance drop at low temperatures is the change in the properties of the liquid electrolyte and its low freezing point, which inhibits Li-ion conductivity between the cathode and anode, thereby reducing the electrochemical reaction rate 2,5 .”
Active balancing system in battery management system for Lithium-ion battery
Ness, S., Boujoudar, Y., Aljarbouh, A., Iysaouy, L. E., Azeroual, M., Bassine, F. Z., & Rele, M. (2024) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijece.v14i4.pp3640-3648 · Cited by 11
“The primary function of the battery management system (BMS) is to oversee and maintain the balance of individual battery cells that make up a battery charge [3].”
Background
A π‐Conjugated Porphyrin Complex as Cathode Material Allows Fast and Stable Energy Storage in Calcium Batteries
Smok, T., Shakouri, S., Abouzari‐Lotf, E., Pammer, F., Diemant, T., Jana, S., Roy, A., Xiu, Y., Klyatskaya, S. V., Ruben, M., et al. (2023) · Batteries & Supercaps · doi:10.1002/batt.202300308 · Cited by 12
The functional electrolyte containing 2-fluorobenzenesulfonyl fluoride (2FF) additive enhances the performance of LiNi0.8Co0.1Mn0.1O2/graphite batteries by stabilizing the cathode interface
Hu, H., He, X., Zeng, X.-Y., Li, H., Sun, C., Fan, W.-Z., Ma, Z., & Nan, J. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233914 · Cited by 9
Noninvasive Monitoring of Internal State of Li-Ion Batteries via Magnetic Sensing
Khatun, A., Bender, F., Mensah-Brown, A. K., & Josse, F. J. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3339441 · Cited by 11
“It is well known that battery parameters, such as charge capacity, OCV, and internal resistance, depend on operating temperature [40], [41], [42].”
Background
Composite Structural Battery: A Review
Mao, R., Lei, Z., Di, J., Shang, Y., Bai, R., & Yan, C. (2024) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4065094 · Cited by 11
Optimal Fast-Charging Strategy for Cylindrical Li-Ion Cells at Different Temperatures
Jaguemont, J., Darwiche, A., & Bardé, F. (2024) · World Electric Vehicle Journal · doi:10.3390/wevj15080330 · Cited by 13
“For instance, at low temperatures, the internal resistance of the battery increases [8], leading to significant power loss [9,10].”
Self-citation
Substitution or expansion: Effects of new energy vehicle subsidies on air quality
Wang, Q., Xia, F., & Liu, M. (2025) · Journal of Environmental Management · doi:10.1016/j.jenvman.2025.124538 · Cited by 11
Numerical study of a cold start at the ambient temperature of 243 K on methanol engine with coolant heating
Liu, J., Yu, Q., Cheng, J., Yakubu, A. U., Ye, X., & Xiong, S. (2025) · Fuel · doi:10.1016/j.fuel.2025.135138 · Cited by 11

Authors: Jaguemont, J., Boulon, L., & Dubé, Y.
Affiliations: Université du Québec à Trois-Rivières (CA)
Corresponding author: Jaguemont, J.
ORCID: Jaguemont, J.
Boulon, L.
Venue: Applied Energy
Publisher: Elsevier BV
Published: 2016-02
Volume: 164
Pages: 99-114
ISSN: 0306-2619 (ISSN-L)
DOI: 10.1016/j.apenergy.2015.11.034
OpenAlex: W2219501311
Cited by: 1,188
References: 140
Citations by year: 2026: 121 · 2025: 169 · 2024: 120 · 2023: 144 · 2022: 130 · 2021: 127 · 2020: 114 · 2019: 104 · 2018: 73 · 2017: 58 · 2016: 28
FWCI: 51.59
Type: journal article
Language: en
Open access: green
www.sciencedirect.com
Licence: cc-by-nc-nd
www.elsevier.com/tdm/userlicense/1.0/ (tdm)
www.elsevier.com/legal/tdmrep-license (tdm)
Locations: Applied Energy (publishedVersion)
RePEc: Research Papers in Economics (submittedVersion)
VUBIR (Vrije Universiteit Brussel) (submittedVersion, cc-by-nc-nd)
Topics: Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
Keywords: lithium-ion batteries, hybrid electric vehicles, electric vehicles, low-temperature performance, battery capacity fade, power fade, battery aging mechanisms, internal impedance, battery thermal management, battery model

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

A comprehensive review of lithium-ion batteries used in hybrid and electric vehicles at cold temperatures

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks