The DOI matches its Crossref record; 73 of the 73 references it cites were found in a registry or an index.
On the environmental impacts of 3D printing technology
Abstract
The introduction of new materials is tied to the rapid development of manufacturing processes. Additive manufacturing (AM) has been employed to fabricate a solid three-dimensional (3D) part directly from a computer-aided design (CAD) data. AM is an industrial process that has been widely employed in different industries in the past few years. In fact, this 3D printing is a rapid prototyping technology that involves a series of techniques. Although several challenges and limitations exist in the AM process currently, AM is expected to revolutionize the manufacturing process of engineering components. However, despite the numerous applications of AM techniques in various industries, their environmental impacts are not well documented. AM affords significant changes in production cost, energy consumption, and manufacturing lead times. All these issues have been considered to develop this technology to have higher efficiencies and lower environmental impacts. In this paper, we briefly review AM methods and discuss their environmental impacts. Furthermore, we present the main advantages and disadvantages of AM processes involving polymers. It can be concluded that AM is advantageous in some cases, exhibiting lower energy consumption and comprising shorter manufacturing processes. The analysis and discussion indicate the advantages, limitations, and future research directions for the industrial applications of AM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
What a Waste : A Global Review of Solid Waste Management
Hoornweg, D., & Bhada-Tata, P. (2012) · doi:10.1596/17388 · Cited by 3,129
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
An Overview on 3D Printing Technology: Technological, Materials, and Applications
Shahrubudin, N., Lee, T. C., & Ramlan, R. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2019.06.089 · Cited by 2,050
Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
Ford, S., & Despeisse, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.04.150 · Cited by 1,889
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
Mechanical characterization of 3D-printed polymers
Dizon, J. R. C., Espera, A. H., Chen, Q., & Advincula, R. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.002 · Cited by 1,340
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
(2014) · Elsevier eBooks · doi:10.1016/c2012-0-01172-6 · Cited by 958
A global sustainability perspective on 3D printing technologies
Gebler, M., Schoot Uiterkamp, A. J. M., & Visser, C. (2014) · Energy Policy · doi:10.1016/j.enpol.2014.08.033 · Cited by 950
Binder jetting: A review of process, materials, and methods
Ziaee, M., & Crane, N. B. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 819
Additive manufacturing of biomaterials
Bose, S., Ke, D., Sahasrabudhe, H., & Bandyopadhyay, A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.08.003 · Cited by 738
Rapid Manufacturing: An Industrial Revolution for the Digital Age
(2005) · Wiley eBooks · doi:10.1002/0470033991 · Cited by 679
State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design
Dass, A., & Moridi, A. (2019) · Coatings · doi:10.3390/coatings9070418 · Cited by 667
Weng, Z., Wang, J., Senthil, T., & Wu, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.04.045 · Cited by 609
Trapp, J., Rubenchik, A. M., Guss, G., & Matthews, M. J. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.08.006 · Cited by 509
Ultrafine particle emissions from desktop 3D printers
Stephens, B., Azimi, P., El Orch, Z., & Ramos, T. (2013) · Atmospheric Environment · doi:10.1016/j.atmosenv.2013.06.050 · Cited by 488
Additive manufacturing of ceramics for dental applications: A review
Galante, R., Figueiredo-Pina, C. G., & Serro, A. P. (2019) · Dental Materials · doi:10.1016/j.dental.2019.02.026 · Cited by 441
Faludi, J., Bayley, C., Bhogal, S., & Iribarne, M. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2013-0067 · Cited by 431
Sustainability of additive manufacturing: An overview on its energy demand and environmental impact
Peng, T., Kellens, K., Tang, R., Chen, C., & Chen, G. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.022 · Cited by 426
Azimi, P., Zhao, D., Pouzet, C., Crain, N. E., & Stephens, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.5b04983 · Cited by 389
Additive manufacturing tooling for the automotive industry
Leal, R., Barreiros, F. M., Alves, L., Romeiro, F., Vasco, J. C., Santos, M., & Marto, C. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0239-8 · Cited by 388
Eco-friendly polymer composites for green packaging: Future vision and challenges
Moustafa, H., Youssef, A. M., Darwish, N. A., & Abou-Kandil, A. I. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.05.048 · Cited by 381
3D printing: the dawn of a new era in manufacturing?
Bogue, R. (2013) · Assembly Automation · doi:10.1108/aa-06-2013-055 · Cited by 371
Yao, T., Deng, Z., Zhang, K., & Li, S. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.01.025 · Cited by 352
3D-printed sensors: Current progress and future challenges
Khosravani, M. R., & Reinicke, T. (2020) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.111916 · Cited by 331
Self-citationEnvironmental assessment of additive manufacturing in the automotive industry
Böckin, D., & Tillman, A.-M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.086 · Cited by 307
Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use
Diaz, N., Redelsheimer, E., & Dornfeld, D. (2011) · Glocalized Solutions for Sustainability in Manufacturing · doi:10.1007/978-3-642-19692-8_46 · Cited by 290
Comparative environmental impacts of additive and subtractive manufacturing technologies
Paris, H., Mokhtarian, H., Coatanéa, E., Museau, M., & Ituarte, I. F. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.04.036 · Cited by 263
CelloMOF: Nanocellulose Enabled 3D Printing of Metal–Organic Frameworks
Sultan, S., Abdelhamid, H. N., Zou, X., & Mathew, A. P. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805372 · Cited by 240
Emissions of Nanoparticles and Gaseous Material from 3D Printer Operation
Kim, Y., Yoon, C., Ham, S., Park, J., Kim, S., Kwon, O., & Tsai, P.-J. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b02805 · Cited by 220
Long, W.-J., Tao, J.-L., Lin, C., Gu, Y.-C., Mei, L., Duan, H.-B., & Xing, F. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118054 · Cited by 220
Recent advances on 3D printing graphene-based composites
Guo, H., Lv, R., & Bai, S. (2019) · Nano Materials Science · doi:10.1016/j.nanoms.2019.03.003 · Cited by 218
Rapid prototyping: energy and environment in the spotlight
Mognol, P., Lepicart, D., & Perry, N. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610637246 · Cited by 185
Sustainability issues in laser-based additive manufacturing
Sreenivasan, R., Goel, A., & Bourell, D. L. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.124 · Cited by 159
Gu, J., Wensing, M., Uhde, E., & Salthammer, T. (2019) · Environment International · doi:10.1016/j.envint.2018.12.014 · Cited by 158
Davis, A. Y., Zhang, Q., Wong, J. P. S., Weber, R. J., & Black, M. (2019) · Building and Environment · doi:10.1016/j.buildenv.2019.106209 · Cited by 155
A robotic cell for performing sheet lamination-based additive manufacturing
Bhatt, P. M., Kabir, A. M., Peralta, M., Bruck, H. A., & Gupta, S. K. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.02.002 · Cited by 146
Snow, Z., Martukanitz, R. P., & Joshi, S. B. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.04.017 · Cited by 145
Multiscale Geometric Design Principles Applied to 3D Printed Schwarzites
Sajadi, S. M., Owuor, P. S., Schara, S., Woellner, C. F., Rodrigues, V., Vajtai, R., Lou, J., Galvao, D. S., Tiwary, C. S., & Ajayan, P. M. (2017) · Advanced Materials · doi:10.1002/adma.201704820 · Cited by 144
Green Composites from Natural Resources
Thakur, V. K. (2013) · CRC Press eBooks · doi:10.1201/b16076 · Cited by 134
Deng, Y., Cao, S., Chen, A., & Guo, Y. (2016) · Building and Environment · doi:10.1016/j.buildenv.2016.05.021 · Cited by 128
Characterization of particulate matters and total VOC emissions from a binder jetting 3D printer
Afshar‐Mohajer, N., Wu, C., Ladun, T., Rajon, D. A., & Huang, Y. H. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.07.013 · Cited by 124
Walachowicz, F., Bernsdorf, I., Papenfuss, U., Zeller, C., Graichen, A., Navrotsky, V., Rajvanshi, N., & Kiener, C. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12637 · Cited by 117
Environmental impact modeling of selective laser sintering processes
Kellens, K., Renaldi, R., Dewulf, W., Kruth, J., & Duflou, J. R. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0018 · Cited by 117
Kim, H., Yang, G. H., Choi, C. H., Cho, Y. S., & Kim, G. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.07.159 · Cited by 105
Cheng, Y., & Chen, F. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.07.025 · Cited by 99
Nonato, R. C., Mei, L. H. I., Bonse, B. C., Chinaglia, E. F., & Morales, A. R. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.02.026 · Cited by 97
Particle emissions from fused deposition modeling 3D printers: Evaluation and meta-analysis
Byrley, P., George, B. J., Boyes, W. K., & Rogers, K. R. (2018) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2018.11.070 · Cited by 95
Le, V. T., Paris, H., & Mandil, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.06.204 · Cited by 87
Cost- and energy-efficient manufacture of gears by laser beam melting
Kamps, T., Lutter-Günther, M., Seidel, C., Gutowski, T. G., & Reinhart, G. (2018) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2018.01.002 · Cited by 87
Hart, K. R., Frketic, J. B., & Brown, J. R. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.04.011 · Cited by 83
Aduba, D. C., Margaretta, E., Marnot, A., Heifferon, K. V., Surbey, W. R., Chartrain, N. A., Whittington, A. R., Long, T. E., & Williams, C. B. (2019) · Materials Today Communications · doi:10.1016/j.mtcomm.2019.01.003 · Cited by 83
Investigation of Ultrafine Particle Emissions of Desktop 3D Printers in the Clean Room
Zhou, Y. H., Kong, X.-R., Chen, A., & Cao, S. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.08.1099 · Cited by 79
Fatigue of injection molded and 3D printed polycarbonate urethane in solution
Miller, A. T., Safranski, D. L., Smith, K. E., Sycks, D. G., Guldberg, R. E., & Gall, K. (2016) · Polymer · doi:10.1016/j.polymer.2016.11.055 · Cited by 77
Liu, Z., Jiang, Q., Cong, W., Li, T., & Zhang, H. (2017) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-017-1622-6 · Cited by 73
Kong, L., Ambrosi, A., Nasir, M. Z. M., Guan, J., & Pumera, M. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903872 · Cited by 65
Chang, Y., Jiang, J., Wu, C., Yang, W. L., Chen, L., Chen, P., Shen, J., Qian, S., Zhou, T., Wu, L., et al. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.100492 · Cited by 65
Energy and Resource Efficiency of SLS/SLM Processes
Kellens, K., Yasa, E., Renaldi, R., Dewulf, W., Kruth, J., & Duflou, J. R. (2011) · doi:10.26153/tsw/15272 · Cited by 57
Zhuang, H., Lin, R., Liu, Y., Zhang, M., Zhai, D., Huan, Z., & Wu, C. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01095 · Cited by 55
Development of novel highly conductive 3D printable hybrid polymer-graphene composites
Mohan, V. B., Krebs, B. J., & Bhattacharyya, D. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2018.09.023 · Cited by 54
Roadmap to sustainable plastic additive manufacturing
Kumar, S., & Czekanski, A. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2018.02.006 · Cited by 51
Bournias-Varotsis, A., Han, X., Harris, R. A., & Engstrøm, D. S. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100799 · Cited by 51
Magisetty, R., & Cheekuramelli, N. S. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2018.11.004 · Cited by 44
A Tripropylene Glycol Diacrylate-based Polymeric Support Ink for Material Jetting
He, Y., Zhang, F., Saleh, E., Vaithilingam, J., Aboulkhair, N. T., Begines, B., Tuck, C. J., Hague, R., Ashcroft, I., & Wildman, R. D. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.06.001 · Cited by 40
Additive manufacturing of electrochemical interfaces: Simultaneous detection of biomarkers
Ho, E. H. Z., Ambrosi, A., & Pumera, M. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2018.03.008 · Cited by 40
Application of Additive Manufacturing technology to an Aerospace component for better trade-off’s
Reddy, K. V. P., Mirzana, I. M., & Reddy, A. K. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.11.644 · Cited by 38
Fast scanning calorimetry for semicrystalline polymers in fused deposition modeling
Fitzharris, E. R., Rosen, D. W., & Shofner, M. L. (2019) · Polymer · doi:10.1016/j.polymer.2019.01.083 · Cited by 32
A validated computational framework to evaluate the stiffness of 3D printed ankle foot orthoses
Ielapi, A., Lammens, N., Paepegem, W. V., Forward, M., Deckers, J. P., Vermandel, M., & Beule, M. D. (2019) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2019.1601712 · Cited by 31
Boxception: Impact Resistance Structure Using 3D Printing
Sajadi, S. M., Owuor, P. S., Vajtai, R., Lou, J., Ayyagari, R. S., Tiwary, C. S., & Ajayan, P. M. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900167 · Cited by 22
Cited by
3D-printed sensors: Current progress and future challenges
Khosravani, M. R., & Reinicke, T. (2020) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.111916 · Cited by 331
Self-citation3D printing for polymer/particle-based processing: A review
Xu, W., Jambhulkar, S., Zhu, Y., Ravichandran, D., Kakarla, M., Vernon, B., Lott, D. G., Cornella, J. L., Shefi, O., Miquelard-Garnier, G., et al. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109102 · Cited by 318
Machine learning in predicting mechanical behavior of additively manufactured parts
Nasiri, S., & Khosravani, M. R. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.004 · Cited by 202
Self-citationPost-Production Finishing Processes Utilized in 3D Printing Technologies
Kantaros, A., Ganetsos, T., Petrescu, F., Ungureanu, L., & Munteanu, I. (2024) · Processes · doi:10.3390/pr12030595 · Cited by 80
Metadata
- Authors
- Khosravani, M. R., & Reinicke, T.
- Venue
- Applied Materials Today
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 20
- Pages
- 100689
- ISSN
- 2352-9407 (ISSN-L)
- OpenAlex
- W3024334322
- Cited by
- 284
- References
- 73
- FWCI
- 14.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.