Cited by 343Polymer Surface Interaction StudiesNitric Oxide and Endothelin EffectsHydrogels: synthesis, properties, applications

The DOI matches its Crossref record; 68 of the 69 references it cites were found in a registry or an index.

Polymers incorporating nitric oxide releasing/generating substances for improved biocompatibility of blood-contacting medical devices

Frost, Megan C., Reynolds, Melissa M., Meyerhoff, Mark E.·2005·Biomaterials

DOI 10.1016/j.biomaterials.2004.06.006

Open this paper in CoChat — free account

Abstract

The current state-of-the-art with respect to the preparation, characterization and biomedical applications of novel nitric oxide (NO) releasing or generating polymeric materials is reviewed. Such materials show exceptional promise as coatings to prepare a new generation of medical devices with superior biocompatiblity. Nitric oxide is a well-known inhibitor of platelet adhesion and activation, as well as a potent inhibitor of smooth muscle cell proliferation. Hence, polymers that release or generate NO locally at their surface exhibit greatly enhanced thromboresistivity and have the potential to reduce neointimal hyperplasia caused by device damage to blood vessel walls. In this review, the use of diazeniumdiolates and nitrosothiols as NO donors within a variety polymeric matrixes are summarized. Such species can either be doped as discrete NO donors within polymeric films, or covalently linked to polymer backbones and/or inorganic polymeric filler particles that are often employed to enhance the strength of biomedical polymers (e.g., fumed silica or titanium dioxide). In addition, very recent efforts to create catalytic polymers possessing immobilized Cu(II) sites capable of generating NO from endogenous oxidized forms of NO already present in blood and other physiological fluids (nitrite and nitrosothiols) are discussed. Preliminary literature data illustrating the efficacy of the various NO release/generating polymers as coatings for intravascular sensors, extracorporeal blood loop circuits, and arteriovenous grafts/shunts are reviewed.

Integrity signals

Registry

Crossref · 10.1016/j.biomaterials.2004.06.006

Cites

68 of 68 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

The anti‐aggregating properties of vascular endothelium: interactions between prostacyclin and nitric oxide
Radomski, M. W., Palmer, R. M. J., & Moncada, S. (1987) · British Journal of Pharmacology · doi:10.1111/j.1476-5381.1987.tb11367.x · Cited by 1,158
The role of nitric oxide and cGMP in platelet adhesion to vascular endothelium
Radomski, M. W., Palmer, R. M. J., & Moncada, S. (1987) · Biochemical and Biophysical Research Communications · doi:10.1016/s0006-291x(87)80299-1 · Cited by 746
Mechanism of Nitric Oxide Release from S-Nitrosothiols
Singh, R. J., Hogg, N., Joseph, J., & Kalyanaraman, B. (1996) · Journal of Biological Chemistry · doi:10.1074/jbc.271.31.18596 · Cited by 600
New nitric oxide-releasing zwitterions derived from polyamines
Hrabie, J. A., Klose, J. R., Wink, D. A., & Keefer, L. K. (1993) · The Journal of Organic Chemistry · doi:10.1021/jo00058a030 · Cited by 593
The restenosis paradigm revisited: An alternative proposal for cellular mechanisms
Schwartz, R. S., Holmes, D. R., & Topol, E. J. (1992) · Journal of the American College of Cardiology · doi:10.1016/0735-1097(92)90389-5 · Cited by 562
The Chemistry of S-Nitrosothiols
Williams, D. L. H. (1999) · Accounts of Chemical Research · doi:10.1021/ar9800439 · Cited by 499
Venous neointimal hyperplasia in polytetrafluoroethylene dialysis grafts
Roy‐Chaudhury, P., Kelly, B. S., Miller, M. A., Reaves, A., Armstrong, J., Nanayakkara, N., & Heffelfinger, S. C. (2001) · Kidney International · doi:10.1046/j.1523-1755.2001.00750.x · Cited by 350
Estimation of nitric oxide production and reactionrates in tissue by use of a mathematical model
Vaughn, M. W., Kuo, L., & Liao, J. C. (1998) · American Journal of Physiology-Heart and Circulatory Physiology · doi:10.1152/ajpheart.1998.274.6.h2163 · Cited by 338
Endothelium-derived relaxing factor reduces platelet adhesion to bovine endothelial cells.
Sneddon, J. M., & Vane, J. R. (1988) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.85.8.2800 · Cited by 257
Kinetics of Nitric Oxide Autoxidation in Aqueous Solution in the Absence and Presence of Various Reductants. The Nature of the Oxidizing Intermediates
Goldstein, S., & Czapski, G. (1995) · Journal of the American Chemical Society · doi:10.1021/ja00154a007 · Cited by 251

Flagged first, then by citations

Show all 69 references

1 of the 69 references couldn’t be matched to a known paper.

Research works printed but not linked: 6

Roy-Chaudhury, 2002, Vascular brachytherapy for hemodialysis vascular access dysfunction, J Invas Cardiol, 14, 25E
Feng, 2000, Reconstitution of thrombomodulin into polymerizable phospholipid vesicles, Polym Prepr, 41, 16
Makrides SC, Ryan US. Overview of the endothelium. In: Loscalzo J, Schafer AI, editors. Thrombosis and hemorrhage, 2nd ed. Baltimore: Williams & Wilkins; 1998. p. 295–306 [Chapter 13].
Annich, 2000, Reduced platelet activation and thrombosis in extracorporeal circuits coated with nitric oxide release polymers, Crit Care Med, 28, 915, 10.1097/00003246-200004000-00001 · DOI
Batchelor MM. Synthesis, characterization of nitric oxide releasing agents/polymer for biomedical applications. Ph.D. dissertation, University of Michigan, 2004. p. 157–230.
Bohl, 2000, Nitric oxide-generating polymers reduce platelet adhesion and smooth muscle cell proliferation, Biomaterials, 21, 2273, 10.1016/S0142-9612(00)00153-8 · DOI

Sorted by citations

Items 101–200 of 343

Nitric Oxide-Releasing Fabrics and Other Acrylonitrile-Based Diazeniumdiolates
DeRosa, F., Kibbe, M. R., Najjar, S. F., Citro, M. L., Keefer, L. K., & Hrabie, J. A. (2007) · Journal of the American Chemical Society · doi:10.1021/ja0686864 · Cited by 50
Analysis of Vascular Inflammation against Bioresorbable Zn–Ag-Based Alloys
Oliver, A. A., Guillory, R. J., Flom, K. L., Morath, L. M., Kolesar, T. M., Mostaed, E., Sikora-Jasinska, M., Drelich, J. W., & Goldman, J. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00740 · Cited by 48
Preparation, characterization, and silanization of 3D microporous PDMS structure with properly sized pores for endothelial cell culture
Zargar, R., Nourmohammadi, J., & Amoabediny, G. (2015) · Biotechnology and Applied Biochemistry · doi:10.1002/bab.1371 · Cited by 48
Covalent surface modification of a titanium alloy with a phosphorylcholine‐containing copolymer for reduced thrombogenicity in cardiovascular devices
Ye, S., Johnson, C. A., Woolley, J. R., Snyder, T. A., Gamble, L. J., & Wagner, W. R. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32184 · Cited by 48
Nitric Oxide-Releasing Silica Nanoparticle-Doped Polyurethane Electrospun Fibers
Koh, A., Carpenter, A. W., Slomberg, D. L., & Schoenfisch, M. H. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am402044s · Cited by 50
Mussel Inspired Coating of a Biocompatible Cyclodextrin Based Polymer onto CoCr Vascular Stents
Sobocinski, J., Laure, W., Taha, M., Courcot, E., Chai, F., Simon, N., Addad, A., Martel, B., Haulon, S., Woisel, P., et al. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am405774v · Cited by 53
Fabrication of Biodegradable Polymeric Nanofibers with Covalently Attached NO Donors
Wold, K. A., Damodaran, V. B., Suazo, L. A., Bowen, R. A., & Reynolds, M. M. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300383w · Cited by 47
Self-citation
S-Nitrosoglutathione loaded poly(lactic-co-glycolic acid) microparticles for prolonged nitric oxide release and enhanced healing of methicillin-resistant Staphylococcus aureus-infected wounds
Hlaing, S. P., Kim, J., Lee, J., Hasan, N., Cao, J., Naeem, M., Lee, E. H., Shin, J. H., Jung, Y., Lee, B.-L., et al. (2018) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2018.09.009 · Cited by 48
A regenerable ruthenium tetraammine nitrosyl complex immobilized on a modified silica gel surface: Preparation and studies of nitric oxide release and nitrite-to-NO conversion
Doro, F. G., Filho, U. P. R., & Tfouni, E. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2006.11.013 · Cited by 48
Delivery of Antioxidant and Anti-inflammatory Agents for Tissue Engineered Vascular Grafts
Washington, K. S., & Bashur, C. A. (2017) · Frontiers in Pharmacology · doi:10.3389/fphar.2017.00659 · Cited by 45
Development of an Injectable Nitric Oxide Releasing Poly(ethylene) Glycol-Fibrin Adhesive Hydrogel
Joseph, C., McCarthy, C. W., Tyo, A. G., Hubbard, K. R., Fisher, H. C., Altscheffel, J. A., He, W., Pinnaratip, R., Liu, Y., Lee, B. P., et al. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01331 · Cited by 47
Fabrication and Characterization of a Nitric Oxide-Releasing Nanofibrous Gelatin Matrix
Vogt, C., Xing, Q., He, W., Li, B., Frost, M. C., & Zhao, F. (2013) · Biomacromolecules · doi:10.1021/bm301984w · Cited by 45
Self-citation
Acrylonitrile-Based Nitric Oxide Releasing Melt-Spun Fibers for Enhanced Wound Healing
Lowe, A., Deng, W., Smith, D. W., & Balkus, K. J. (2012) · Macromolecules · doi:10.1021/ma300913w · Cited by 45
Composite materials with embedded metal organic framework catalysts for nitric oxide release from bioavailable S-nitrosothiols
Harding, J. L., & Reynolds, M. M. (2014) · J. Mater. Chem. B · doi:10.1039/c3tb21458c · Cited by 43
Self-citation
Development and hemocompatibility testing of nitric oxide releasing polymers using a rabbit model of thrombogenicity
Major, T. C., Handa, H., Annich, G. M., & Bartlett, R. H. (2014) · Journal of Biomaterials Applications · doi:10.1177/0885328214538866 · Cited by 43
Development of S-Nitroso-N-Acetylpenicillamine Impregnated Medical Grade Polyvinyl Chloride for Antimicrobial Medical Device Interfaces
Feit, C., Chug, M. K., & Brisbois, E. J. (2019) · ACS Applied Bio Materials · doi:10.1021/acsabm.9b00593 · Cited by 43
Nano-biomaterials for cardiovascular applications: Clinical perspective
Cicha, I., Singh, R., Garlichs, C. D., & Alexiou, C. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.03.015 · Cited by 43
Nitric Oxide Adsorption in MIL-100(Al) MOF Studied by Solid-State NMR
Khan, A. H., Barth, B., Hartmann, M., Haase, J., & Bertmer, M. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b01725 · Cited by 43
Increasing the Lifetime of Insulin Cannula with Antifouling and Nitric Oxide Releasing Properties
Chug, M. K., Feit, C., & Brisbois, E. J. (2019) · ACS Applied Bio Materials · doi:10.1021/acsabm.9b00908 · Cited by 44
Intravascular glucose/lactate sensors prepared with nitric oxide releasing poly(lactide-co-glycolide)-based coatings for enhanced biocompatibility
Yan, Q., Major, T. C., Bartlett, R. H., & Meyerhoff, M. E. (2011) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2011.04.026 · Cited by 41
Self-citation
Biodegradable nitric oxide‐releasing poly(diol citrate) elastomers
Zhao, H., Serrano, M. C., Popowich, D. A., Kibbe, M. R., & Ameer, G. A. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32536 · Cited by 41
Biocompatibility and the Efficacy of Medical Implants
Shard, A. G., & Tomlins, P. E. (2006) · Regenerative Medicine · doi:10.2217/17460751.1.6.789 · Cited by 40
Amperometric Nitric Oxide Microsensor Based on Nanopore-Platinized Platinum: The Application for Imaging NO Concentrations
Shim, J. H., & Lee, Y. (2009) · Analytical Chemistry · doi:10.1021/ac901552m · Cited by 40
S-Nitroso-N-acetyl-D-penicillamine covalently linked to polydimethylsiloxane (SNAP–PDMS) for use as a controlled photoinitiated nitric oxide release polymer
Gierke, G. E., Nielsen, M., & Frost, M. C. (2011) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/12/5/055007 · Cited by 39
Self-citation
Endothelial Progenitor Cells, Neointimal Hyperplasia, and Hemodialysis Vascular Access Dysfunction
Roy‐Chaudhury, P. (2005) · Circulation · doi:10.1161/circulationaha.105.548651 · Cited by 39
Effects of l-arginine immobilization on the anticoagulant activity and hemolytic property of polyethylene terephthalate films
Liu, Y., Yang, Y., & Wu, F. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.01.060 · Cited by 38
Biotemplated Synthesis and Characterization of Mesoporous Nitric Oxide-Releasing Diatomaceous Earth Silica Particles
Grommersch, B. M., Pant, J., Hopkins, S. P., Goudie, M. J., & Handa, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b15967 · Cited by 39
Fabrication of nitric oxide-releasing polyurethane glucose sensor membranes
Koh, A., Riccio, D. A., Sun, B., Carpenter, A. W., Nichols, S. P., & Schoenfisch, M. H. (2011) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2011.06.005 · Cited by 37
Lipid-based carriers for controlled delivery of nitric oxide
Elnaggar, M. A., Subbiah, R., Han, D. K., & Joung, Y. K. (2017) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2017.1285904 · Cited by 37
Metal ion‐mediated nitric oxide generation from polyurethanes via covalently linked copper(II)‐cyclen moieties
Puiu, S. C., Zhou, Z., White, C. C., Neubauer, L. J., Zhang, Z., Lange, L. E., Mansfield, J. A., Meyerhoff, M. E., & Reynolds, M. M. (2009) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31391 · Cited by 36
Self-citation
Nitric Oxide Releasing Tygon Materials: Studies in Donor Leaching and Localized Nitric Oxide Release at a Polymer-Buffer Interface
Joslin, J. M., Lantvit, S. M., & Reynolds, M. M. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am402112y · Cited by 35
Self-citation
Water-Soluble Poly(ethylenimine)-Based Nitric Oxide Donors: Preparation, Characterization, and Potential Application in Hemodialysis
Zhou, Z., Annich, G. M., Wu, Y., & Meyerhoff, M. E. (2006) · Biomacromolecules · doi:10.1021/bm060361s · Cited by 34
Self-citation
Poly(diol‐co‐citrate)s as Novel Elastomeric Perivascular Wraps for the Reduction of Neointimal Hyperplasia
Serrano, M. C., Vavra, A. K., Jen, M. C., Hogg, M. E., Murar, J., Martínez, J., Keefer, L. K., Ameer, G. A., & Kibbe, M. R. (2011) · Macromolecular Bioscience · doi:10.1002/mabi.201000509 · Cited by 34
Modular Approach to Chromophore Encapsulation in Fluorinated Arylene Vinylene Ether Polymers Possessing Tunable Photoluminescence
Iacono, S. T., Budy, S. M., Moody, J. D., Smith, R. C., & Smith, D. W. (2008) · Macromolecules · doi:10.1021/ma801440t · Cited by 34
Application of Polymer Nanocomposites in the Nanomedicine Landscape: Envisaging Strategies to Combat Implant Associated Infections
Dwivedi, P., Narvi, S. S., & Tewari, R. P. (2013) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabfm.2013.11544 · Cited by 34
V-PROLI/NO, a Prodrug of the Nitric Oxide Donor, PROLI/NO
Chakrapani, H., Showalter, B. M., Kong, L., Keefer, L. K., & Saavedra, J. E. (2007) · Organic Letters · doi:10.1021/ol701419a · Cited by 34
Nitric oxide-releasing poly(vinyl alcohol) film for increasing dermal vasodilation
Marcilli, R. H. M., & de Oliveira, M. G. (2013) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2013.10.036 · Cited by 34
Photo-crosslinked biodegradable elastomers for controlled nitric oxide delivery
Wang, Y., Kibbe, M. R., & Ameer, G. A. (2013) · Biomaterials Science · doi:10.1039/c3bm00169e · Cited by 32
Silk Nanoparticles: A Natural Polymeric Platform for Nitric Oxide Delivery in Biomedical Applications
Ghalei, S., Mondal, A., Hopkins, S. P., Singha, P., Devine, R., & Handa, H. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c13813 · Cited by 32
Biodegradable S-nitrosothiol tethered multiblock polymer for nitric oxide delivery
Damodaran, V. B., & Reynolds, M. M. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm10315f · Cited by 32
Self-citation
Light-controlled release of nitric oxide from solid polymer composite materials using visible and near infra-red light
Mase, J. D., Razgoniaev, A. O., Tschirhart, M. K., & Ostrowski, A. D. (2015) · Photochemical & Photobiological Sciences · doi:10.1039/c4pp00441h · Cited by 33
Design Considerations for Silica-Particle-Doped Nitric-Oxide-Releasing Polyurethane Glucose Biosensor Membranes
Soto, R. J., Schofield, J. B., Walter, S. E., Malone‐Povolny, M. J., & Schoenfisch, M. H. (2016) · ACS Sensors · doi:10.1021/acssensors.6b00623 · Cited by 31
Highly hydrophobic polytetrafluoroethylene particle immobilization via polydopamine anchor layer on nitric oxide releasing polymer for biomedical applications
Mondal, A., Devine, R., Bright, L. M. E., Manuel, J., Singha, P., Mancha, J., Palmer, M., & Handa, H. (2020) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2020.10.051 · Cited by 31
A strategy of functional crosslinking acellular matrix in blood-contacting implantable devices with recombinant humanized collagen type III (rhCOLIII)
Ge, Y., Guo, G., Liu, K., Yang, F., Yang, L., Wang, Y., & Zhang, X. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109667 · Cited by 31
Transport of Nitric Oxide (NO) in Various Biomedical grade Polyurethanes: Measurements and Modeling Impact on NO Release Properties of Medical Devices
Ren, H., Bull, J. L., & Meyerhoff, M. E. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00215 · Cited by 31
Self-citation
Prevention of Candida albicans Biofilm Formation
Coenye, T. (2011) · The Open Mycology Journal · doi:10.2174/1874437001105010009 · Cited by 30
Mesoporous silica materials and nanoparticles as carriers for controlled and site-specific delivery of gaseous signaling molecules
Chakraborty, I., & Mascharak, P. K. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.07.028 · Cited by 31
Compositions Including Synthetic and Natural Blends for Integration and Structural Integrity: Engineered for Different Vascular Graft Applications
Shojaee, M., & Bashur, C. A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700001 · Cited by 30
Functionalised solids delivering bioactive nitric oxide gas for therapeutic applications
Gregg, S. T., Yuan, Q., Morris, R. E., & Xiao, B. (2017) · Materials Today Communications · doi:10.1016/j.mtcomm.2017.07.007 · Cited by 30
Antimicrobial Medical Devices in Preclinical Development and Clinical Use
Brooks, B. D., Brooks, A. E., & Grainger, D. W. (2012) · Springer eBooks · doi:10.1007/978-1-4614-1031-7_13 · Cited by 30
Nitric Oxide Adsorption in Cu3btc2-Type MOFs—Physisorption and Chemisorption as NONOates
Khan, A. H., Peikert, K., Hoffmann, F., Fröba, M., & Bertmer, M. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b11919 · Cited by 33
An in vivo study of a gold nanocomposite biomaterial for vascular repair
Ostdiek, A. M., Ivey, J. R., Grant, D. A., Gopaldas, J., & Grant, S. A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.06.045 · Cited by 30
Platinized Silica Nanoporous Membrane Electrodes for Low‐Fouling Hydrogen Peroxide Detection
Li, X., Zhou, L., Ding, J., Sun, L., & Su, B. (2020) · ChemElectroChem · doi:10.1002/celc.202000321 · Cited by 29
A stent for co-delivering paclitaxel and nitric oxide from abluminal and luminal surfaces: Preparation, surface characterization, and in vitro drug release studies
Gallo, A., & Mani, G. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.04.072 · Cited by 28
Creation of Hydrophilic Nitric Oxide Releasing Polymers via Plasma Surface Modification
Pegalajar‐Jurado, A., Joslin, J. M., Hawker, M. J., Reynolds, M. M., & Fisher, E. R. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502003z · Cited by 27
Self-citation
Compartmentalized Nanocomposite for Dynamic Nitric Oxide Release
Koehler, J. J., Zhao, J., Jedlicka, S. S., Porterfield, D. M., & Rickus, J. L. (2008) · The Journal of Physical Chemistry B · doi:10.1021/jp803276u · Cited by 27
Antibacterial polyurethanes
Xu, L., & Siedlecki, C. A. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100614-6.00009-3 · Cited by 28
Recent Advances in Hemocompatible Polymers for Biomedical Applications
Brisbois, E. J., Handa, H., & Meyerhoff, M. E. (2014) · Springer eBooks · doi:10.1007/978-3-319-12478-0_16 · Cited by 28
Self-citation
Construction and biofunctional evaluation of electrospun vascular graft loaded with selenocystamine for in situ catalytic generation of nitric oxide
Chen, S., An, J., Weng, L., Li, Y., Han, X., Wang, Y., Ding, D., Kong, D., & Wang, S. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.09.040 · Cited by 27
Addressing the Inflammatory Response to Clinically Relevant Polymers by Manipulating the Host Response Using ITIM Domain-Containing Receptors
Slee, J. B., Christian, A. J., Levy, R. J., & Stachelek, S. J. (2014) · Polymers · doi:10.3390/polym6102526 · Cited by 29
Reduction of thrombogenicity of PVC-based sodium selective membrane electrodes using heparin-modified chitosan
Badr, I. H. A., Gouda, M., Abdel‐Sattar, R., & Sayour, H. E. M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.08.087 · Cited by 27
Direct Formation of S-Nitroso Silica Nanoparticles from a Single Silica Source
Chou, H.-C., Chiu, S.-J., Liu, Y., & Hu, T. (2014) · Langmuir · doi:10.1021/la4048215 · Cited by 27
A hemocompatible polyurethane surface having dual fibrinolytic and nitric oxide generating functions
Gu, H. S., Chen, X., Liu, X., Zhan, W., Lyu, Z., Yu, Q., Wu, Z., & Chen, H. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb02735k · Cited by 26
Nitric oxide release for improving performance of implantable chemical sensors – A review
Cha, K. H., Wang, X., & Meyerhoff, M. E. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.10.002 · Cited by 27
Self-citation
Construction of hemocompatible polycarbonate urethane with sulfoammonium zwitterionic polyethylene glycol
Guo, J., Feng, Y., Ye, Y., & Zhao, H. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34214 · Cited by 25
Nanosized copper( ii ) oxide/silica for catalytic generation of nitric oxide from S -nitrosothiols
Kulyk, K., Azizova, L. R., Cunningham, J. M., Mikhalovska, L. I., Borysenko, M. V., & Mikhalovsky, S. V. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb00137f · Cited by 25
Roles and current applications of S-nitrosoglutathione in anti-infective biomaterials
Hu, Q., Ye, Z., Pi, L., & Ao, J. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2022.100419 · Cited by 28
Microelectrodes for in-vivo determination of pH
Zhou, D. D. (2008) · Elsevier eBooks · doi:10.1016/b978-012373738-0.50012-x · Cited by 27
Catalytic Formation of Nitric Oxide Mediated by Ti–Cu Coatings Provides Multifunctional Interfaces for Cardiovascular Applications
Wang, Q., Akhavan, B., Jing, F., Cheng, D., Sun, H. L., Xie, D., Leng, Y. X., Bilek, M., & Huang, N. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701487 · Cited by 24
Endogenous Nitric Oxide-Releasing Microgel Coating Prevents Clot Formation on Oxygenator Fibers Exposed to In Vitro Blood Flow
Winnersbach, P., Hosseinnejad, A., Breuer, T., Fechter, T., Jakob, F., Schwaneberg, U., Rossaint, R., Bleilevens, C., & Singh, S. (2022) · Membranes · doi:10.3390/membranes12010073 · Cited by 24
Biological applications of the electrochemical sensing of nitric oxide: fundamentals and recent developments
Trouillon, R. (2012) · Biological Chemistry · doi:10.1515/hsz-2012-0245 · Cited by 24
New perspectives on the reactions of metal nitrosyls with thiolates as nucleophiles
Souza, M. L., Roveda, A. C., Pereira, J. C. M., & Franco, D. W. (2015) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2015.03.008 · Cited by 24
Nitric Oxide as a Surgical Adjuvant
Krausz, A. E., & Friedman, A. (2015) · Future Science OA · doi:10.4155/fso.15.56 · Cited by 23
Photo-Controlled Release of NO and CO with Inorganic and Organometallic Complexes
Pierri, A. E., Muizzi, D. A., Ostrowski, A. D., & Ford, P. C. (2014) · Structure and bonding · doi:10.1007/430_2014_164 · Cited by 24
NO adsorption in amino-modified Cu3(btc)2-type MOFs studied by solid-state NMR
Khan, A. H., Peikert, K., Fröba, M., & Bertmer, M. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.02.022 · Cited by 23
Organoditelluride-mediated catalytic S-nitrosothiol decomposition
Hwang, S., & Meyerhoff, M. E. (2007) · Journal of Materials Chemistry · doi:10.1039/b700375g · Cited by 22
Self-citation
Glucosylated polymeric nanoparticles: A sweetened approach against blood compatibility paradox
Thasneem, Y. M., Sajeesh, S., & Sharma, C. P. (2013) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2013.03.001 · Cited by 22
Nitric Oxide-Releasing Tubular Polymersomes toward Advanced Gas Therapeutic Carriers
Li, Z., Wang, S., Zhao, L., Gu, J., & Che, H. (2024) · ACS Macro Letters · doi:10.1021/acsmacrolett.3c00577 · Cited by 21
Synthesis and Characterization of Controlled Nitric Oxide Release from S-Nitroso-N-Acetyl-d-Penicillamine Covalently Linked to Polyvinyl Chloride (SNAP-PVC)
Hopkins, S. P., & Frost, M. C. (2018) · Bioengineering · doi:10.3390/bioengineering5030072 · Cited by 23
Self-citation
Enzyme-Activated Nitric Oxide-Releasing Composite Material for Antibacterial Activity Against Escherichia coli
Hibbard, H. A. J., & Reynolds, M. M. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00670 · Cited by 22
Self-citation
Nitric oxide-generating l -cysteine-grafted graphene film as a blood-contacting biomaterial
Du, Z. H., Dou, R., Zu, M., Liu, X., Yin, W., Zhao, Y., Chen, J., Yan, L., & Gu, Z. (2016) · Biomaterials Science · doi:10.1039/c6bm00074f · Cited by 21
Electromodulated release of nitric oxide through polymer material from reservoir of inorganic nitrite salt
Höfler, L., Koley, D., Wu, J., Xi, C., & Meyerhoff, M. E. (2012) · RSC Advances · doi:10.1039/c2ra20853a · Cited by 20
Self-citation
Evaluation of Continuous Lactate Monitoring Systems within a Heparinized In Vivo Porcine Model Intravenously and Subcutaneously
Wolf, A. K., Renehan, K., Ho, K. K. Y., Carr, B. D., Chen, C., Cornell, M. S., Ye, M., Rojas-Peña, Á., & Chen, H. (2018) · Biosensors · doi:10.3390/bios8040122 · Cited by 20
The formation of an anti-restenotic/anti-thrombotic surface by immobilization of nitric oxide synthase on a metallic carrier
Alagem-Shafir, M., Kivovich, E., Tzchori, I., Lanir, N., Falah, M., Flugelman, M. Y., Dinnar, U., Beyar, R., Lotan, N., & Sivan, S. S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.043 · Cited by 22
Solution or solid – it doesn't matter: visible light-induced CO release reactivity of zinc flavonolato complexes
Anderson, S. N., Larson, M. T., & Berreau, L. M. (2016) · Dalton Transactions · doi:10.1039/c6dt01709f · Cited by 20
Improved Polymer Hemocompatibility for Blood-Contacting Applications via S-Nitrosoglutathione Impregnation
Griffin, L., Douglass, M. E., Goudie, M. J., Hopkins, S. P., Schmiedt, C. W., & Handa, H. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c24557 · Cited by 19
Enhancing biocompatibility of some cation selective electrodes using heparin modified bacterial cellulose
Badr, I. H. A., Abdel‐Sattar, R., & Keshk, S. M. A. S. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.08.043 · Cited by 19
CellNO trap: Novel device for quantitative, real-time, direct measurement of nitric oxide from cultured RAW 267.4 macrophages
He, W., & Frost, M. C. (2016) · Redox Biology · doi:10.1016/j.redox.2016.03.006 · Cited by 20
Self-citation
Self-assembling soft structures for intracellular NO release and promotion of neurite outgrowth
Pal, H. A., Mohapatra, S., Gupta, V., Ghosh, S., & Verma, S. K. (2017) · Chemical Science · doi:10.1039/c6sc05017d · Cited by 19
Surface-Modifying Effect of Zwitterionic Polyurethane Oligomers Complexed with Metal Ions on Blood Compatibility
Ga, D.-H., Lim, C., Jang, Y., Son, T., Han, D. K., & Joung, Y. K. (2021) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-021-00400-w · Cited by 19
Nitric Oxide (NO)‐Induced Death of Gram‐Negative Bacteria from a Light‐Controlled NO‐Releasing Platform
Halpenny, G. M., Heilman, B. J., & Mascharak, P. K. (2012) · Chemistry & Biodiversity · doi:10.1002/cbdv.201100320 · Cited by 19
Nitric Oxide: What a Vascular Surgeon Needs to Know
Popowich, D. A., Varu, V. N., & Kibbe, M. R. (2007) · Vascular · doi:10.2310/6670.2007.00051 · Cited by 19
Nitric oxide-releasing polyurethanes
Pant, J., Goudie, M. J., Brisbois, E. J., & Handa, H. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100614-6.00014-7 · Cited by 18
Topical photochemical nitric oxide release from porous poly(vinyl alcohol) membrane for visible light modulation of dermal vasodilation
Marchi, S. D., & de Oliveira, M. G. (2017) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/j.jphotochem.2017.06.016 · Cited by 19
Nitric oxide-releasing molecules at the interface of inorganic chemistry and biology: a concise overview
Mir, J. M., Malik, B. A., & MAURYA, R. C. (2019) · Reviews in Inorganic Chemistry · doi:10.1515/revic-2018-0017 · Cited by 19
Improved thrombogenicity on oxygen etched Ti6Al4V surfaces
Riedel, N. A., Smith, B. S., Williams, J. D., & Popat, K. C. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.03.008 · Cited by 18
The effect of surfactants, crosslinking agents and L-cysteine on the stabilization and mechanical properties of bovine pericardium.
Mendoza‐Novelo, B., & Cauich‐Rodríguez, J. V. (2009) · PubMed · Cited by 18
S-Nitroso-N-acetylpenicillamine (SNAP) Derivatization of Peptide Primary Amines to Create Inducible Nitric Oxide Donor Biomaterials
VanWagner, M. J., Rhadigan, J., Lancina, M. G., Lebovsky, A., Romanowicz, G. E., Holmes, H. R., Brunette, M. A., Snyder, K. L., Bostwick, M., Lee, B. P., et al. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4017945 · Cited by 19
Self-citation
72-Hour in vivo evaluation of nitric oxide generating artificial lung gas exchange fibers in sheep
Lai, A. C., Demarest, C. T., Do‐Nguyen, C. C., Ukita, R., Skoog, D. J., Carleton, N. M., Amoako, K. A., Montoya, P. J., & Cook, K. E. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.04.004 · Cited by 19
Effects of local nitric oxide release on human mesenchymal stem cell attachment and proliferation on gelatin hydrogel surface
Xing, Q., Yates, K. M., Bailey, A., Vogt, C. D., He, W., Frost, M. C., & Zhao, F. (2013) · Surface Innovations · doi:10.1680/si.13.00019 · Cited by 18
Self-citation

Authors: Frost, M. C., Reynolds, M. M., & Meyerhoff, M. E.
Affiliations: University of Michigan (US)
Corresponding author: Meyerhoff, Mark E.
ORCID: Frost, Megan C.
Reynolds, Melissa M.
Meyerhoff, Mark E.
Venue: Biomaterials
Publisher: Elsevier BV
Published: 2005-05
Volume: 26
Issue: 14
Pages: 1685-1693
ISSN: 0142-9612 (ISSN-L)
DOI: 10.1016/j.biomaterials.2004.06.006
OpenAlex: W2037640551
Cited by: 343
References: 69
Citations by year: 2026: 11 · 2025: 6 · 2024: 7 · 2023: 11 · 2022: 10 · 2021: 11 · 2020: 20 · 2019: 22 · 2018: 20 · 2017: 16 · 2016: 25 · 2015: 18 · 2014: 24 · 2013: 24 · 2012: 21
FWCI: 0.79
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
www.elsevier.com/legal/tdmrep-license (tdm)
Locations: Biomaterials (publishedVersion)
PubMed (publishedVersion)
Topics: Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
Health Sciences › Medicine › Physiology (medical) › Nitric Oxide and Endothelin Effects
Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
Keywords: nitric oxide donors, blood-contacting devices, biocompatibility, thromboresistance, intimal hyperplasia, diazeniumdiolates, S-nitrosothiols, polymer coatings, covalent polymerization, fumed silica, titanium dioxide, nitrite, extracorporeal circuit, arteriovenous graft
MeSH terms: Animals, Biocompatible Materials, Blood, Delayed-Action Preparations, Equipment and Supplies, Humans, Nitric Oxide, Platelet Adhesiveness, Polymers, Thrombosis

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Polymers incorporating nitric oxide releasing/generating substances for improved biocompatibility of blood-contacting medical devices

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks