The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
3D printing technologies: techniques, materials, and post-processing
Abstract
Additive manufacturing, or more commonly known as 3D printing, has been at the forefront of manufacturing research for the past couple decades. Many advances have occurred in the basic printing techniques, materials, and post-processing schemes. In recent years, there have been many critical developments in the field 3D printing, such as the development of volumetric 3D printing to increase the printing speed, composite 3D printing to create piezoelectric devices, and hydrogel structures highly similar to blood vessels. The spectrum of materials that can be printed has also increased, allowing researchers to print a variety of materials including live cells, modulus changing polymers and even spacecraft-grade metals.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
An integrated design and fabrication strategy for entirely soft, autonomous robots
Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J. (2016) · Nature · doi:10.1038/nature19100 · Cited by 2,127
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Mohamed, O. A., Masood, S. H., & Bhowmik, J. L. (2015) · Advances in Manufacturing · doi:10.1007/s40436-014-0097-7 · Cited by 1,481
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Additive manufacturing of polymer-derived ceramics
Eckel, Z. C., Zhou, C., Martin, J. H., Jacobsen, A. J., Carter, W. B., & Schaedler, T. A. (2016) · Science · doi:10.1126/science.aad2688 · Cited by 1,106
A 3D-printed, functionally graded soft robot powered by combustion
Bartlett, N. W., Tolley, M. T., Overvelde, J. T. B., Weaver, J. C., Mosadegh, B., Bertoldi, K., Whitesides, G. M., & Wood, R. J. (2015) · Science · doi:10.1126/science.aab0129 · Cited by 1,052
Volumetric additive manufacturing via tomographic reconstruction
Kelly, B. E., Bhattacharya, I., Heidari, H., Shusteff, M., Spadaccini, C. M., & Taylor, H. K. (2019) · Science · doi:10.1126/science.aau7114 · Cited by 1,025
Hydraulic hydrogel actuators and robots optically and sonically camouflaged in water
Yuk, H., Lin, S., Ma, C., Takaffoli, M., Fang, N. X., & Zhao, X. (2017) · Nature Communications · doi:10.1038/ncomms14230 · Cited by 988
3D printing of soft robotic systems
Wallin, T. J., Pikul, J., & Shepherd, R. F. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0002-2 · Cited by 942
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
Making sense of 3-D printing: Creating a map of additive manufacturing products and services
Conner, B. P., Manogharan, G. P., Martof, A. N., Rodomsky, L. M., Rodomsky, C. M., Jordan, D. C., & Limperos, J. W. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.005 · Cited by 750
Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing
Patel, D. K., Sakhaei, A. H., Layani, M., Zhang, B., Ge, Q., & Magdassi, S. (2017) · Advanced Materials · doi:10.1002/adma.201606000 · Cited by 673
Conformal Printing of Electrically Small Antennas on Three‐Dimensional Surfaces
Adams, J. J., Duoss, E. B., Malkowski, T. F., Motala, M. J., Ahn, B. Y., Nuzzo, R. G., Bernhard, J. T., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201003734 · Cited by 630
Overview of Materials Qualification Needs for Metal Additive Manufacturing
Seifi, M., Salem, A., Beuth, J., Harrysson, O., & Lewandowski, J. J. (2016) · JOM · doi:10.1007/s11837-015-1810-0 · Cited by 630
Volumetric Bioprinting of Complex Living‐Tissue Constructs within Seconds
Bernal, P. N., Delrot, P., Loterie, D., Li, Y., Malda, J., Moser, C., & Levato, R. (2019) · Advanced Materials · doi:10.1002/adma.201904209 · Cited by 604
High-Force Soft Printable Pneumatics for Soft Robotic Applications
Yap, H. K., Ng, H. Y., & Yeow, C.-H. (2016) · Soft Robotics · doi:10.1089/soro.2016.0030 · Cited by 601
Cellulose Nanocrystal Inks for 3D Printing of Textured Cellular Architectures
Siqueira, G., Kokkinis, D., Libanori, R., Hausmann, M. K., Gladman, A. S., Neels, A., Tingaut, P., Zimmermann, T., Lewis, J. A., & Studart, A. R. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604619 · Cited by 580
Sequential Self-Folding Structures by 3D Printed Digital Shape Memory Polymers
Mao, Y., Yu, K., Isakov, M. S., Wu, J., Dunn, M. L., & Jerry Qi, H. (2015) · Scientific Reports · doi:10.1038/srep13616 · Cited by 510
Cui, H., Hensleigh, R., Yao, D., Maurya, D., Kumar, P., Kang, M. G., Priya, S., & Zheng, X. (2019) · Nature Materials · doi:10.1038/s41563-018-0268-1 · Cited by 481
Murr, L. E., Martinez, E., Amato, K. N., Gaytan, S. M., Hernandez, J., Ramirez, D. A., Shindo, P. W., Medina, F., & Wicker, R. B. (2012) · Journal of Materials Research and Technology · doi:10.1016/s2238-7854(12)70009-1 · Cited by 470
Capacitive Soft Strain Sensors via Multicore–Shell Fiber Printing
Frutiger, A., Muth, J. T., Vogt, D. M., Mengüç, Y., Campo, A., Valentine, A. D., Walsh, C. J., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500072 · Cited by 468
Melocchi, A., Parietti, F., Maroni, A., Foppoli, A., Gazzaniga, A., & Zema, L. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.05.036 · Cited by 409
Fox, J. C., Moylan, S. P., & Lane, B. M. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.02.347 · Cited by 377
Kumbhar, N. N., & Mulay, A. V. (2018) · Journal of The Institution of Engineers (India): Series C · doi:10.1007/s40032-016-0340-z · Cited by 375
One-step volumetric additive manufacturing of complex polymer structures
Shusteff, M., Browar, A. E. M., Kelly, B. E., Henriksson, J., Weisgraber, T. H., Panas, R. M., Fang, N. X., & Spadaccini, C. M. (2017) · Science Advances · doi:10.1126/sciadv.aao5496 · Cited by 375
Next Generation Orthopaedic Implants by Additive Manufacturing Using Electron Beam Melting
Murr, L. E., Gaytan, S. M., Martinez, E., Medina, F., & Wicker, R. B. (2012) · International Journal of Biomaterials · doi:10.1155/2012/245727 · Cited by 306
Printing in Three Dimensions with Graphene
García‐Tuñon, E., Barg, S., Franco, J., Bell, R., Eslava, S., D'Elia, E., Maher, R. C., Guitian, F., & Saiz, E. (2015) · Advanced Materials · doi:10.1002/adma.201405046 · Cited by 303
Omar, O. M., MOHAMED, M., SyedH., Masood, ., & Bhowmik (2015) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 302
Review on powder-based electron beam additive manufacturing technology
Gong, X., Anderson, T., & Chou, K. (2014) · Manufacturing Review · doi:10.1051/mfreview/2014001 · Cited by 290
3D-printed microelectronics for integrated circuitry and passive wireless sensors
Wu, S.-Y., Yang, C., Hsu, W., & Lin, L. (2015) · Microsystems & Nanoengineering · doi:10.1038/micronano.2015.13 · Cited by 285
Self-citationFabrication of drug-loaded hydrogels with stereolithographic 3D printing
Martinez, P. R., Goyanes, A., Basit, A. W., & Gaisford, S. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.09.003 · Cited by 274
Origami and 4D printing of elastomer-derived ceramic structures
Liu, G., Zhao, Y., Wu, G., & Lu, J. (2018) · Science Advances · doi:10.1126/sciadv.aat0641 · Cited by 270
Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
Yasa, E., Kruth, J.-P., & Deckers, J. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.03.063 · Cited by 265
3D Printing of Conductive Complex Structures with In Situ Generation of Silver Nanoparticles
Fantino, E., Chiappone, A., Roppolo, I., Manfredi, D., Bongiovanni, R., Pirri, C. F., & Calignano, F. (2016) · Advanced Materials · doi:10.1002/adma.201505109 · Cited by 253
3D printed microfluidic circuitry via multijet-based additive manufacturing
Sochol, R. D., Sweet, E., Glick, C. C., Venkatesh, S., Avetisyan, A., Ekman, K. F., Raulinaitis, A., Tsai, A., Wienkers, A., Korner, K., et al. (2016) · Lab on a Chip · doi:10.1039/c5lc01389e · Cited by 237
Self-citationTwo‐photon stereolithography for realizing ultraprecise three‐dimensional nano/microdevices
Park, S. ‐., Yang, D. ‐., & Lee, K. ‐. (2009) · Laser & Photonics Reviews · doi:10.1002/lpor.200810027 · Cited by 233
3D printed microfluidics and microelectronics
Sochol, R. D., Sweet, E., Glick, C. C., Wu, S.-Y., Yang, C., Restaino, M., & Lin, L. (2018) · Microelectronic Engineering · doi:10.1016/j.mee.2017.12.010 · Cited by 223
Self-citationFunctional 3D Printing for Microfluidic Chips
Weisgrab, G., Ovsianikov, A., & Costa, P. F. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900275 · Cited by 206
Foresti, D., Kroll, K. T., Amissah, R., Sillani, F., Homan, K. A., Poulikakos, D., & Lewis, J. A. (2018) · Science Advances · doi:10.1126/sciadv.aat1659 · Cited by 195
Click chemistry stereolithography for soft robots that self-heal
Wallin, T. J., Pikul, J. H., Bodkhe, S., Peele, B. N., Mac Murray, B. C., Therriault, D., McEnerney, B. W., Dillon, R. P., Giannelis, E. P., & Shepherd, R. F. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb01605k · Cited by 173
3D Printed Flexure Hinges for Soft Monolithic Prosthetic Fingers
Mutlu, R., Alici, G., in het Panhuis, M., & Spinks, G. M. (2016) · Soft Robotics · doi:10.1089/soro.2016.0026 · Cited by 161
Shakor, P., Nejadi, S., Paul, G., & Malek, S. (2019) · Frontiers in Built Environment · doi:10.3389/fbuil.2018.00085 · Cited by 161
Khaled, S. A., Alexander, M. R., Irvine, D. J., Wildman, R. D., Wallace, M. J., Sharpe, S., Yoo, J. S., & Roberts, C. J. (2018) · AAPS PharmSciTech · doi:10.1208/s12249-018-1107-z · Cited by 154
3D Printed Optical Quality Silica and Silica–Titania Glasses from Sol–Gel Feedstocks
Destino, J. F., Dudukovic, N. A., Johnson, M. A., Nguyen, D. T., Yee, T. D., Egan, G. C., Sawvel, A. M., Steele, W. A., Baumann, T. F., Duoss, E. B., et al. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201700323 · Cited by 142
Valentin, T. M., Leggett, S. E., Chen, P., Sodhi, J., Stephens, L. H., McClintock, H. D., Sim, J. Y., & Wong, I. Y. (2017) · Lab on a Chip · doi:10.1039/c7lc00694b · Cited by 98
Truby, R. L., Katzschmann, R. K., Lewis, J. A., & Rus, D. L. (2019) · IEEE International Conference on Soft Robotics (RoboSoft) · doi:10.1109/robosoft.2019.8722722 · Cited by 95
3D-printed ceramic structures with in situ grown whiskers for effective oil/water separation
Chen, Z., Zhang, D., Peng, E., & Ding, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.05.150 · Cited by 91
Towards Behavior Design of a 3D-Printed Soft Robotic Hand
Scharff, R. B. N., Doubrovski, E. L., Poelman, W., Jonker, P. P., Wang, C. C. L., & Geraedts, J. M. P. (2016) · Biosystems & biorobotics · doi:10.1007/978-3-319-46460-2_4 · Cited by 74
Effect of the resin viscosity on the writing properties of two-photon polymerization
Zandrini, T., Λιάρος, Ν., Jiang, L. J., Lu, Y., Fourkas, J. T., Osellame, R., & Baldacchini, T. (2019) · Optical Materials Express · doi:10.1364/ome.9.002601 · Cited by 73
Self-powered triboelectric touch sensor made of 3D printed materials
Haque, R. I., Chandran, O., Lani, S., & Briand, D. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.07.038 · Cited by 69
Li, Z., Liu, C., Wang, B., Wang, C., Wang, Z., Yang, F., Gao, C., Liu, H., Qin, Y., & Wang, J. (2018) · RSC Advances · doi:10.1039/c7ra13313h · Cited by 59
Characteristics and Processing of Hydrogen-Treated Copper Powders for EB-PBF Additive Manufacturing
Ledford, C., Rock, C., Carriere, P. R., Frigola, P., Gamzina, D., & Horn, T. (2019) · Applied Sciences · doi:10.3390/app9193993 · Cited by 52
New Frontiers for Biofabrication and Bioreactor Design in Microphysiological System Development
Parrish, J., Lim, K. S., Zhang, B., Radisic, M., & Woodfield, T. B. F. (2019) · Trends in biotechnology · doi:10.1016/j.tibtech.2019.04.009 · Cited by 47
Karakurt, I., Ho, K. Y., Ledford, C., et al. (2018) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.07.097 · Cited by 37
Self-citationPhamduy, P., Vazquez, M. A., Kim, C., Mwaffo, V., Rizzo, A., & Porfiri, M. (2017) · International Journal of Intelligent Robotics and Applications · doi:10.1007/s41315-017-0012-z · Cited by 33
3D Printed Flexible Triboelectric Energy Harvesters via Conformal Coating of Parylene AF4
Karakurt, I., Zhong, J., & Lin, L. (2019) · IEEE International Conference on Micro Electro Mechanical Systems (MEMS) · doi:10.1109/memsys.2019.8870748 · Cited by 10
Self-citation3D Printed Bio-Sensing Chip for the Determination of Bacteria Antibiotic-Resistant Profile
Yeh, P.-C., Chen, J., Karakurt, I., & Lin, L. (2019) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/transducers.2019.8808229 · Cited by 5
Self-citation
Cited by
A review on voids of 3D printed parts by fused filament fabrication
Tao, Y., Kong, F., Li, Z., Zhang, J., Zhao, X., Yin, Q., Xing, D., & Li, P. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.10.108 · Cited by 443
Vat photopolymerization of polymers and polymer composites: Processes and applications
Al Rashid, A., Ahmed, W., Khalid, M. Y., & Koç, M. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102279 · Cited by 326
Post-Production Finishing Processes Utilized in 3D Printing Technologies
Kantaros, A., Ganetsos, T., Petrescu, F., Ungureanu, L., & Munteanu, I. (2024) · Processes · doi:10.3390/pr12030595 · Cited by 80
Metadata
- Authors
- Karakurt, I., & Lin, L.
- Venue
- Current Opinion in Chemical Engineering
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 28
- Pages
- 134-143
- ISSN
- 2211-3398 (ISSN-L)
- OpenAlex
- W3028306365
- Cited by
- 346
- References
- 60
- FWCI
- 3.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.