The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Additive manufacturing of cementitious composites: Materials, methods, potentials, and challenges
Abstract
Abstract From medical to aerospace applications, construction on the Earth to construction on the other planets, additive manufacturing (AM) technology, which is commonly known as 3D printing, has revolutionized manufacturing and construction industries. In other word, other Renaissance era has been started by the born of AM technology. Since the early stage, AM technology developed the initial concepts such as workforce, production time, and costs to an advanced level. With further progression and introduction of multifunctional materials to 3D printing technology, a new chapter of attempts towards mechanization in many more industries, eliminating excessive components needed for fabricated devices, and post-fabrication processes has been launched, which undoubtedly are able to push limitations forwards automation in building and construction industry. Despite of passing almost three decades since the genesis of AM technology, its application in construction industry has not reached to its real potential due to the various numbers of reasons including inappropriate available 3D printing techniques for large-scale construction, limitations in the materials, economic issue due to the expensive equipment, etc. Appearance of new 3D printing methods suitable for structural printing such as contour crafting and binder jetting, have provided new paths towards automated building and construction industry. However, in respect of material science, numerous challenges must be addressed including developing smart cementitious composites suitable for 3D structural printing, reinforcement of cementitious composites during printing process, and 3D printing of fibre-reinforced cementitious composites. Achieving to high-performance printed cementitious composites are another challenge ahead. Highly likely, construction of real habitats on the other planets such as the Mars and Moon, would not be a dream if we could cope with present hurdles in 3D structural printing and develop innovative generation of 3D printers, such as robotic 3D printers. Hence, due to the important role of cement-based materials in the future of automated construction industry, this paper makes an attempt to represent a critical review of materials and methods for AM of cementitious composites, and will address challenges and future possibilities of this beneficial field of science.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Stimulus-responsive shape memory materials: a review
Sun, L., Huang, W. M., Ding, Z., Zhao, Y., Wang, C. C., Purnawali, H., & Tang, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.04.065 · Cited by 1,105
A global sustainability perspective on 3D printing technologies
Gebler, M., Schoot Uiterkamp, A. J. M., & Visser, C. (2014) · Energy Policy · doi:10.1016/j.enpol.2014.08.033 · Cited by 950
Building components for an outpost on the lunar soil by means of a novel 3D printing technology
Cesaretti, G., Dini, E., De Kestelier, X., Colla, V., & Pambaguian, L. (2014) · Acta Astronautica · doi:10.1016/j.actaastro.2013.07.034 · Cited by 806
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Active printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
Multi-shape active composites by 3D printing of digital shape memory polymers
Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24224 · Cited by 399
Mega-scale fabrication by Contour Crafting
Khoshnevis, B., Hwang, D., Yao, K. T., & Yeh, Z. (2006) · International Journal of Industrial and Systems Engineering · doi:10.1504/ijise.2006.009791 · Cited by 378
In situ handheld three‐dimensional bioprinting for cartilage regeneration
Di Bella, C., Duchi, S., O'Connell, C. D., Blanchard, R., Augustine, C., Yue, Z., Thompson, F., Richards, C., Beirne, S., Onofrillo, C., et al. (2018) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2476 · Cited by 313
From 3D to 4D printing: Approaches and typical applications
Zhou, Y., Huang, W. M., Kang, S. F., Wu, X. L., Lu, H. B., Fu, J., & Cui, H. (2015) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-015-0925-0 · Cited by 224
Lunar Contour Crafting - A Novel Technique for ISRU-Based Habitat Development
Khoshnevis, B., Bodiford, M., Burks, K., Ethridge, E., Tucker, D., Kim, W., Toutanji, H., & Fiske, M. (2005) · 43rd AIAA Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.2005-538 · Cited by 138
Faxing Structures to the Moon: Freeform Additive Construction System (FACS)
Howe, S. A., Wilcox, B. H., McQuin, C., Townsend, J., Rieber, R. R., Barmatz, M., & Leichty, J. (2013) · AIAA SPACE 2013 Conference and Exposition · doi:10.2514/6.2013-5437 · Cited by 42
Cited by
Mix design concepts for 3D printable concrete: A review
Zhang, C., Nerella, V. N., Krishna, A., Wang, S., Zhang, Y., Mechtcherine, V., & Banthia, N. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104155 · Cited by 421
A critical review of 3D printing in construction: benefits, challenges, and risks
El-Sayegh, S., Romdhane, L., & Manjikian, S. (2020) · Archives of Civil and Mechanical Engineering · doi:10.1007/s43452-020-00038-w · Cited by 387
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Al Rashid, A., Khan, S. A., G. Al-Ghamdi, S., & Koç, M. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103268 · Cited by 257
Metadata
- Authors
- Hamidi, F., & Aslani, F.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 218
- Pages
- 582-609
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2946953795
- Cited by
- 191
- References
- 18
- FWCI
- 10.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.