The DOI matches its Crossref record; 119 of the 119 references it cites were found in a registry or an index.
Potential applications of geopolymer concrete in construction: A review
Open accessAbstract
The environmental aspects of sustainable development in the construction industry consist of the utilization of secondary raw materials and materials which can be recycled in the design and construction of new structures. The preliminary and inevitable interest in the use of full or partial replacements of by-products as complementary pozzolanic materials was mostly induced by the enforcement of the reduction/elimination of the greenhouse gas emission from the production of Portland cement. With the significant evolution of geopolymer concrete as an alternative for Portland cement in the past decade, it is necessary to explore possible construction applications in which geopolymer concrete can be utilized. Hence, this review paper was carried out to explore various elements such as the precursors used in geopolymers concrete and their corresponding applications. The environmental impacts of various geopolymer concrete are also discussed. This paper also presents an overview of the real applications of geopolymer concrete for the construction of various infrastructures. Recommendations and prospects for geopolymer concrete are also provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymer technology: The current state of the art
Duxson, P., Fernández-Jiménez, A., Provis, J. L., Lukey, G. C., Palomo, A., & van Deventer, J. S. J. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0637-z · Cited by 4,742
Geopolymers: Inorganic polymeric new materials
Davidovits, J. (1991) · Journal of Thermal Analysis · doi:10.1007/bf01912193 · Cited by 4,251
Advances in alternative cementitious binders
Juenger, M. C. G., Winnefeld, F., Provis, J. L., & Ideker, J. H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.012 · Cited by 1,851
New cements for the 21st century: The pursuit of an alternative to Portland cement
Shi, C., Jiménez, A. F., & Palomo, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.016 · Cited by 1,691
Geopolymer concrete: A review of some recent developments
Singh, B., Ishwarya, G., Gupta, M., & Bhattacharyya, S. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.036 · Cited by 1,484
A review: The comparison between alkali-activated slag (Si + Ca) and metakaolin (Si + Al) cements
Li, C., Sun, H., & Li, L. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.03.020 · Cited by 1,108
Fly ash-based geopolymer: clean production, properties and applications
Zhuang, X. Y., Chen, L., Komarneni, S., Zhou, C. H., Tong, D. S., Yang, H. M., Yu, W. H., & Wang, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.019 · Cited by 1,020
Durability of steel reinforced concrete in chloride environments: An overview
Shi, X., Xie, N., Fortune, K., & Gong, J. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.12.038 · Cited by 929
Clean production and properties of geopolymer concrete; A review
Amran, Y. H. M., Alyousef, R., Alabduljabbar, H., & El-Zeadani, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119679 · Cited by 901
Assessment of CO2 reduction of alkali-activated concrete
Yang, K.-H., Song, J.-K., & Song, K.-I. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.08.001 · Cited by 832
Synthesis and characterization of red mud and rice husk ash-based geopolymer composites
He, J., Jie, Y., Zhang, J., Yu, Y., & Zhang, G. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.11.010 · Cited by 770
Hassan, A., Arif, M., & Shariq, M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.051 · Cited by 639
Role of water in the synthesis of calcined kaolin-based geopolymer
ZUHUA, Z., XIAO, Y., HUAJUN, Z., & YUE, C. (2009) · Applied Clay Science · doi:10.1016/j.clay.2008.09.003 · Cited by 621
Corrosion of Steel in Concrete: Prevention, Diagnosis, Repair
Bertolini, L., Elsener, B., Pedeferri, P., Redaelli, E., & Polder, R. B. (2013) · Wiley eBooks · doi:10.1002/9783527651696 · Cited by 611
Environmental impact assessment of fly ash and silica fume based geopolymer concrete
Bajpai, R., Choudhary, K., Srivastava, A., Sangwan, K. S., & Singh, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120147 · Cited by 576
Structural and material performance of geopolymer concrete: A review
Ma, C.-K., Awang, A. Z., & Omar, W. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.111 · Cited by 528
Properties of fresh and hardened fly ash/slag based geopolymer concrete: A review
Zhang, P., Gao, Z. G., Wang, J., Guo, J., Hu, S., & Ling, Y. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.122389 · Cited by 524
A review on alkaline activation: New analytical perspectives
Palomo, A., Krivenko, P., Garcia-Lodeiro, I., Kavalerova, E., Maltseva, O., & Fernández-Jiménez, A. (2014) · Materiales de Construcción · doi:10.3989/mc.2014.00314 · Cited by 501
Bernal, S. A., de Gutierrez, R. M., Provis, J. L., & Rose, V. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.02.003 · Cited by 473
Mikulčić, H., Klemeš, J. J., Vujanović, M., Urbaniec, K., & Duić, N. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.04.145 · Cited by 432
Mineral commodity summaries 2018
Ober, J. A. (2018) · Mineral Commodity Summaries · doi:10.3133/70194932 · Cited by 431
Development of paving blocks from synergistic use of red mud and fly ash using geopolymerization
Kumar, A., & Kumar, S. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.09.013 · Cited by 425
Microstructural changes in alkali activated fly ash/slag geopolymers with sulfate exposure
Ismail, I., Bernal, S. A., Provis, J. L., Hamdan, S., & van Deventer, J. S. J. (2013) · Materials and Structures · doi:10.1617/s11527-012-9906-2 · Cited by 417
An overview of geopolymers derived from industrial by-products
Mehta, A., & Siddique, R. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.136 · Cited by 391
Review of availability of source materials for geopolymer/sustainable concrete
Assi, L. N., Carter, K., Deaver, E., & Ziehl, P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121477 · Cited by 391
He, J. X., Zhang, J., Yu, Y., & Zhang, G. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.12.011 · Cited by 376
Properties of concrete incorporating fly ash and ground granulated blast-furnace slag
Li, G., & Zhao, X. (2003) · Cement and Concrete Composites · doi:10.1016/s0958-9465(02)00058-6 · Cited by 372
TRENDS IN RED MUD UTILIZATION – A REVIEW
PARAMGURU, R. K., RATH, P. C., & MISRA, V. N. (2004) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827500490477603 · Cited by 370
Polymerization in sodium silicate solutions: a fundamental process in geopolymerization technology
Dimas, D., Giannopoulou, I., & Panias, D. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3497-5 · Cited by 367
Cao, V. D., Pilehvar, S., Salas-Bringas, C., Szczotok, A. M., Rodríguez, J. F., Carmona, M., Al‐Manasir, N., & Kjøniksen, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.11.061 · Cited by 364
Effect of silica fume on the mechanical properties of fly ash based-geopolymer concrete
Okoye, F. N., Durgaprasad, J., & Singh, N. B. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.10.084 · Cited by 363
Synthesis and strength optimization of one-part geopolymer based on red mud
Ye, N., Yang, J., Liang, S., Hu, Y., Hu, J., Xiao, B., & Huang, Q. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.099 · Cited by 363
High-Volume Fly Ash System: Concrete Solution for Sustainable Development
(2000) · ACI Materials Journal · doi:10.14359/804 · Cited by 356
Shahmansouri, A. A., Yazdani, M., Ghanbari, S., Akbarzadeh Bengar, H., Jafari, A., & Farrokh Ghatte, H. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123697 · Cited by 353
A review on mixture design methods for geopolymer concrete
Li, N., Shi, C., Zhang, Z., Wang, H., & Liu, Y. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107490 · Cited by 351
A review on microstructural study and compressive strength of geopolymer mortar, paste and concrete
Ng, C., Alengaram, U. J., Wong, L. S., Mo, K. H., Jumaat, M. Z., & Ramesh, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.075 · Cited by 343
Zhang, P., Wang, K., Li, Q., Wang, J., & Ling, Y. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120896 · Cited by 341
Zhang, D., Zhou, C.-H., Lin, C.-X., Tong, D.-S., & Yu, W.-H. (2010) · Applied Clay Science · doi:10.1016/j.clay.2010.06.019 · Cited by 328
Mehta, A., & Siddique, R. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.313 · Cited by 325
Properties of cementless mortars activated by sodium silicate
Yang, K.-H., Song, J.-K., Ashour, A. F., & Lee, E.-T. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.07.003 · Cited by 319
Bond strength between blended slag and Class F fly ash geopolymer concrete with steel reinforcement
Castel, A., & Foster, S. J. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.02.016 · Cited by 304
Potential of geopolymer technology towards green buildings and sustainable cities
Komnitsas, K. A. (2011) · Procedia Engineering · doi:10.1016/j.proeng.2011.11.2108 · Cited by 298
Nguyen, K. T., Nguyen, Q. D., Le, T. A., Shin, J., & Lee, K. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118581 · Cited by 272
Geopolymers in construction - recent developments
Nawaz, M., Heitor, A., & Sivakumar, M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120472 · Cited by 268
Structural performance of nano-silica modified fly-ash based geopolymer concrete
Adak, D., Sarkar, M., & Mandal, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.111 · Cited by 264
Effect of elevated temperatures on mechanical properties of lightweight geopolymer concrete
Tayeh, B. A., Zeyad, A. M., Agwa, I. S., & Amin, M. (2021) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2021.e00673 · Cited by 249
Self-citationCorrosion of Steel in Concrete
Elsener, B. (2013) · Materials Science and Technology · doi:10.1002/9783527603978.mst0410 · Cited by 242
Investigations on the properties of geopolymer mortar and concrete with mineral admixtures: A review
Jindal, B. B. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.08.025 · Cited by 242
Agwa, I. S., Omar, O. M., Tayeh, B. A., & Abdelsalam, B. A. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117541 · Cited by 240
Self-citationReinforced geopolymer composites for enhanced material greenness and durability
Sakulich, A. R. (2011) · Sustainable Cities and Society · doi:10.1016/j.scs.2011.07.009 · Cited by 223
Pilehvar, S., Cao, V. D., Szczotok, A. M., Valentini, L., Salvioni, D., Magistri, M., Pamies, R., & Kjøniksen, A.-L. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.07.012 · Cited by 223
Zhang, M., Zhao, M., Zhang, G., Mann, D., Lumsden, K., & Tao, M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.07.108 · Cited by 219
Mineral comminution: Energy efficiency considerations
Tromans, D. (2008) · Minerals Engineering · doi:10.1016/j.mineng.2007.12.003 · Cited by 214
Recycling of rice husk waste for a sustainable concrete: A critical review
Tayeh, B. A., Alyousef, R., Alabduljabbar, H., & Alaskar, A. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127734 · Cited by 212
Self-citationFaried, A. S., Mostafa, S. A., Tayeh, B. A., & Tawfik, T. A. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123279 · Cited by 205
Self-citationTechnological performance of açaí natural fibre reinforced cement-based mortars
de Azevedo, A. R. G., Marvila, M. T., Tayeh, B. A., Cecchin, D., Pereira, A. C., & Monteiro, S. N. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101675 · Cited by 203
Self-citationLonghi, M. A., Rodríguez, E. D., Walkley, B., Zhang, Z., & Kirchheim, A. P. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107671 · Cited by 196
Ukwattage, N. L., Ranjith, P. G., & Bouazza, M. (2013) · Fuel · doi:10.1016/j.fuel.2013.02.016 · Cited by 191
Xie, T., Visintin, P., Zhao, X., & Gravina, R. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119380 · Cited by 190
Hassan, A., Arif, M., & Shariq, M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118762 · Cited by 186
A novel geopolymer application: Coatings to protect reinforced concrete against corrosion
Aguirre-Guerrero, A. M., Robayo–Salazar, R., & de Gutiérrez, R. M. (2016) · Applied Clay Science · doi:10.1016/j.clay.2016.10.029 · Cited by 182
Structural performance of reinforced geopolymer concrete members: A review
Mo, K. H., Alengaram, U. J., & Jumaat, M. Z. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.088 · Cited by 179
Xie, J., Chen, W., Wang, J., Fang, C., Zhang, B., & Liu, F. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.311 · Cited by 177
Mesgari, S., Akbarnezhad, A., & Xiao, J. Z. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117571 · Cited by 175
Reddy, M. S., Dinakar, P., & Rao, B. H. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.07.005 · Cited by 170
Physical & mechanical properties of fiber reinforced metakaolin-based geopolymer concrete
Moradikhou, A. B., Esparham, A., & Avanaki, M. J. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118965 · Cited by 165
Mustafa, M. A.-T., Hanafi, I., Mahmoud, R., & Tayeh, B. A. (2019) · Structures · doi:10.1016/j.istruc.2019.06.008 · Cited by 164
Self-citationDas, S. K., Mustakim, S. M., Adesina, A., Mishra, J., Alomayri, T. S., Assaedi, H. S., & Kaze, C. R. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101780 · Cited by 163
Self-citationEffects of nano-palm oil fuel ash and nano-eggshell powder on concrete
Hamada, H., Tayeh, B., Yahaya, F., Muthusamy, K., & Al-Attar, A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119790 · Cited by 162
Self-citationA sustainable calcined water treatment sludge and rice husk ash geopolymer
Nimwinya, E., Arjharn, W., Horpibulsuk, S., Phoo-ngernkham, T., & Poowancum, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.01.060 · Cited by 160
Review PaperSynthesis of clay minerals
Zhang, D., Zhou, C., Lin, C., Tong, D., & Yu, W. (2010) · Applied Clay Science · Cited by 160
Characterization of Aged Slag Concretes
Xu, H., Provis, J. L., van Deventer, J. S. J., & Krivenko, P. V. (2008) · ACI Materials Journal · doi:10.14359/19753 · Cited by 158
Saraya, M. E.-S. I. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.08.071 · Cited by 157
Das, S. K., Mishra, J., Singh, S., Mustakim, S. M., Patel, A., Das, S. K., & Behera, U. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.02.870 · Cited by 155
Liu, M. Y. J., Alengaram, U. J., Santhanam, M., Jumaat, M. Z., & Mo, K. H. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.076 · Cited by 154
Mechanism of Polysialation in the Incorporation of Zirconia into Fly Ash-Based Geopolymers
Phair, J. W., van Deventer, J. S. J., & Smith, J. D. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie990929w · Cited by 151
Formulation and performance of flash metakaolin geopolymer concretes
Pouhet, R., & Cyr, M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.061 · Cited by 147
The Utilization of Recycled Aggregate in High Performance Concrete: A Review
Tayeh, B. A., Saffar, D. M. A., & Alyousef, R. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.05.126 · Cited by 147
Self-citationDurability and mechanical properties of seashell partially-replaced cement
Tayeh, B. A., Hasaniyah, M. W., Zeyad, A. M., Awad, M. M., Alaskar, A. M., Mohamed, A. M., & Alyousef, R. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101328 · Cited by 145
Self-citationUtilisation of steel furnace slag coarse aggregate in a low calcium fly ash geopolymer concrete
Khan, M. S. H., Castel, A., Akbarnezhad, A., Foster, S. J., & Smith, M. A. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.09.001 · Cited by 143
Zeyad, A. M., Johari, M. A. M., Tayeh, B. A., & Yusuf, M. O. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.065 · Cited by 141
Self-citationAssaedi, H. S., Shaikh, F. U. A., & Low, I. M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.07.049 · Cited by 139
Amin, M., Tayeh, B. A., & Agwa, I. S. (2020) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2020.e00459 · Cited by 139
Self-citationPilehvar, S., Cao, V. D., Szczotok, A. M., Carmona, M., Valentini, L., Lanzón, M., Pamies, R., & Kjøniksen, A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.016 · Cited by 138
Zeyad, A. M., Johari, M. A. M., Alharbi, Y. R., Abadel, A. A., Amran, M., Tayeh, B. A., & Abutaleb, A. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.102204 · Cited by 138
Self-citationPerformance of geopolymer tiles in high temperature and saturation conditions
Marvila, M. T., de Azevedo, A. R. G., Delaqua, G. C. G., Mendes, B. C., Pedroti, L. G., & Vieira, C. M. F. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122994 · Cited by 138
Shill, S. K., Al‐Deen, S., Ashraf, M., & Hutchison, W. D. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117886 · Cited by 136
Binici, H., Temiz, H., & Köse, M. M. (2006) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2005.11.005 · Cited by 133
Hamada, H. M., Al-Attar, A., Yahaya, F. M., Muthusamy, K., Tayeh, B. A., & Humada, A. M. (2019) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2019.e00318 · Cited by 129
Self-citationMechanical and deformation properties of rubberized engineered cementitious composite (ECC)
Alaloul, W. S., Musarat, M. A., Tayeh, B. A., Sivalingam, S., Rosli, M. F. B., Haruna, S., & Khan, M. I. (2020) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2020.e00385 · Cited by 126
Self-citationRisk of early age cracking in geopolymer concrete due to restrained shrinkage
Khan, I., Xu, T., Castel, A., Gilbert, R. I., & Babaee, M. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116840 · Cited by 122
Adesina, A. (2021) · Resources Environment and Sustainability · doi:10.1016/j.resenv.2021.100016 · Cited by 120
Self-citationGeopolymer concrete-filled pultruded composite beams – Concrete mix design and application
Ferdous, W., Manalo, A. C., Khennane, A., & Kayali, O. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.12.012 · Cited by 113
Exploitation of the nanowaste ceramic incorporated with nano silica to improve concrete properties
Tawfik, T. A., Metwally, K. A., EL-Beshlawy, S. A., Saffar, D. M. A., Tayeh, B. A., & Hassan, H. S. (2020) · Journal of King Saud University - Engineering Sciences · doi:10.1016/j.jksues.2020.06.007 · Cited by 113
Self-citationAmbient-cured geopolymer concrete with single alkali activator
Zannerni, G. M., Fattah, K. P., & Al-Tamimi, A. K. (2020) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2019.e00131 · Cited by 108
Properties of an aged geopolymer synthesized from calcined ore-dressing tailing of bauxite and slag
Ye, J., Zhang, W., & Shi, D. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.05.017 · Cited by 106
de Azevedo, A. R. G., Marvila, M. T., Rocha, H. A., Cruz, L. R., & Vieira, C. M. F. (2020) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.13585 · Cited by 105
Jindal, B. B., Jangra, P., & Garg, A. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.04.219 · Cited by 98
Yildizel, S. A., Tayeh, B. A., & Calis, G. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.02.083 · Cited by 97
Self-citationAmaral, L. F., Delaqua, G. C. G., Nicolite, M., Marvila, M. T., de Azevedo, A. R. G., Alexandre, J., Vieira, C. M. F., & Monteiro, S. N. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119283 · Cited by 96
Meng, Q., Wu, C., Hao, H., Li, J., Wu, P., Yang, Y., & Wang, Z. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118447 · Cited by 94
Mohammed, A. N., Johari, M. A. M., Zeyad, A. M., et al. (2014) · Journal of Advanced Concrete Technology · doi:10.3151/jact.12.127 · Cited by 93
Self-citationCircular economy and durability in geopolymers ceramics pieces obtained from glass polishing waste
de Azevedo, A. R. G., Marvila, M. T., de Oliveira, L. B., Ferreira, W. M., Colorado, H. A., Teixeira, S. R., & Vieira, C. M. F. (2021) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.13780 · Cited by 89
Aspects of the deformational behaviour of alkali activated fly ash concrete at elevated temperatures
Junaid, M. T., Khennane, A., Kayali, O., Sadaoui, A., Picard, D., & Fafard, M. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.01.026 · Cited by 88
Cao, V. D., Pilehvar, S., Salas-Bringas, C., Szczotok, A. M., Bui, T. Q., Carmona, M., Rodríguez, J. F., & Kjøniksen, A. (2018) · Solar Energy · doi:10.1016/j.solener.2018.12.039 · Cited by 86
Geopolymer cement and concrete: Properties
Singh, N. B., Kumar, M., & Rai, S. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.04.513 · Cited by 78
Leong, H. Y., Ong, D. E. L., Sanjayan, J., & Nazari, A. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.03.046 · Cited by 77
Performance and sustainability overview of alkali-activated self-compacting concrete
Adesina, A. (2020) · Waste Disposal & Sustainable Energy · doi:10.1007/s42768-020-00045-w · Cited by 70
Self-citationBehaviour of GGBS-dolomite geopolymer concrete short column under axial loading
Saranya, P., Nagarajan, P., & Shashikala, A. P. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101232 · Cited by 69
Red mud as a carbon sink: Variability, affecting factors and environmental significance
Si, C., Ma, Y., & Lin, C. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.11.024 · Cited by 67
Kaze, C. R., Adesina, A., Lecomte‐Nana, G. L., Metekong, J. V. S., Samen, L. V. E. K., Kamseu, E., & Melo, U. C. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103229 · Cited by 65
Self-citationEffect of rice husk ash and macro-synthetic fibre on the properties of self-compacting concrete
Safari, J., Mirzaei, M., Rooholamini, H., & Hassani, A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.207 · Cited by 62
Cheng, Z., Zhao, R., Yuan, Y., Li, F., Castel, A., & Xu, T. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119855 · Cited by 55
Development and Performance Evaluation of Very High Early Strength Geopolymer for Rapid Road Repair
Hawa, A., Tonnayopas, D., Prachasaree, W., & Taneerananon, P. (2013) · Advances in Materials Science and Engineering · doi:10.1155/2013/764180 · Cited by 50
Bellum, R. R., Muniraj, K., & Madduru, S. R. C. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.11.299 · Cited by 49
FEA modelling of fracture toughness of steel fibre-reinforced geopolymer composites
Sanjayan, J., Nazari, A., & Pouraliakbar, H. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2015.03.029 · Cited by 45
Performance of eco-friendly mortars made with alkali-activated slag and glass powder as a binder
Cercel, J., Adesina, A., & Das, S. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121457 · Cited by 44
Self-citationMahmood, A. H., Foster, S. J., & Castel, A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118681 · Cited by 41
Shear behavior of geopolymer concrete panels under diagonal tensile stresses
Cárdenas-Pulido, J. W., Reyes, J. C., Carrillo, J., & Ramírez, F. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2020.110518 · Cited by 18
Cited by
Smart materials and technologies for sustainable concrete construction
Nilimaa, J. (2023) · Developments in the Built Environment · doi:10.1016/j.dibe.2023.100177 · Cited by 387
Shehata, N., Mohamed, O. A., Sayed, E. T., Abdelkareem, M. A., & Olabi, A. G. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155577 · Cited by 371
Eco-friendly mix design of slag-ash-based geopolymer concrete using explainable deep learning
Ranasinghe, R. S. S., Kulasooriya, W. K. V. J. B., Perera, U. S., Ekanayake, I. U., Meddage, D. P. P., Mohotti, D., & Rathanayake, U. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.102503 · Cited by 51
Karthik, S., Saravana Raja Mohan, K., Murali, G., Abid, S. R., & Dixit, S. (2024) · Theoretical and Applied Fracture Mechanics · doi:10.1016/j.tafmec.2024.104751 · Cited by 25
Feasibility of using FA and GGBS-derived geopolymer for high liquid limit soil stabilization
Li, C., Tan, G., Weng, H., Shi, J., Li, S., & Xie, J. (2025) · Frontiers in Materials · doi:10.3389/fmats.2025.1643683 · Cited by 7
Metadata
- Authors
- Almutairi, A. L., Tayeh, B. A., Adesina, A., Isleem, H. F., & Zeyad, A. M.
- Venue
- Case Studies in Construction Materials
- Publisher
- Elsevier BV
- Published
- 2021-12
- Volume
- 15
- Pages
- e00733
- ISSN
- 2214-5095 (ISSN-L)
- OpenAlex
- W3206392624
- Cited by
- 481
- References
- 119
- FWCI
- 40.80
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.