The DOI matches its Crossref record; 125 of the 125 references it cites were found in a registry or an index.
Recent advances in Li1+xAlxTi2−x(PO4)3 solid-state electrolyte for safe lithium batteries
Abstract
Abstract Lithium batteries have been indispensable for powering consumer electronics and electric vehicles. However, the utilization of highly flammable/reactive/volatile liquid electrolytes not only poses safety concerns of battery combustion and explosion, but also triggers severe side reactions with electrodes. Solid-state electrolytes with a high ionic conductivity, a low lithium-ion diffusion impedance, a good chemical compatibility, and a superior electrochemical stability have been regarded as critical components to develop safe and high-energy lithium batteries. Specifically, NASICON (Sodium Super Ionic Conductor)-type lithium titanium aluminum phosphate (LATP) in the composition of Li1+xAlxTi2-X(PO4)3 has emerged as a promising solid-state electrolyte (SSE) because of its high ionic conductivity and low manufacturing cost. Herein, the recent progress on the development of LATP SSE is systematically reviewed. The fundamental structure and ion conduction mechanism are introduced and the synthetic routes for LATP SSE are summarized. In addition, we discuss the key parameters of ionic conductivity and exemplify the typical applications of LATP in various electrochemical systems. Despite the technical efforts required for commercializing LATP in practical batteries, this review, focusing on the microstructure, grain boundary resistance, and interfacial behaviors, would pave the way to a bright future for all-solid-state lithium batteries with an exceptional safety, a superior energy density, an outstanding cycle durability, and an acceptable manufacturing cost.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Mechanical alloying and milling
Suryanarayana, C. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(99)00010-9 · Cited by 8,075
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Li-ion battery materials: present and future
Nitta, N., Wu, F., Lee, J. T., & Yushin, G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.10.040 · Cited by 7,389
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Hench, L. L., & West, J. K. (1990) · Chemical Reviews · doi:10.1021/cr00099a003 · Cited by 4,450
Mechanical Alloying And Milling
Suryanarayana, C. (2004) · CRC Press eBooks · doi:10.1201/9780203020647 · Cited by 3,882
High-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
Complexes of alkali metal ions with poly(ethylene oxide)
Fenton, D. E., Parker, J. M., & Wright, P. V. (1973) · Polymer · doi:10.1016/0032-3861(73)90146-8 · Cited by 2,697
Bachman, J. C., Muy, S., Grimaud, A., Chang, H.-H., Pour, N., Lux, S. F., Paschos, O., Maglia, F., Lupart, S., Lamp, P., et al. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00563 · Cited by 2,537
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,530
Lithium−Air Battery: Promise and Challenges
Girishkumar, G., McCloskey, B., Luntz, A. C., Swanson, S., & Wilcke, W. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1005384 · Cited by 2,528
Poly(ethylene oxide)-based electrolytes for lithium-ion batteries
Xue, Z., He, D., & Xie, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03471j · Cited by 2,302
Metal–Air Batteries with High Energy Density: Li–Air versus Zn–Air
Lee, J., Tai Kim, S., Cao, R., Choi, N., Liu, M., Lee, K. T., & Cho, J. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000010 · Cited by 2,286
Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth
Yan, K., Lu, Z., Lee, H.-W., Xiong, F., Hsu, P.-C., Li, Y., Zhao, J., Chu, S., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.10 · Cited by 2,116
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Han, X., Gong, Y., Fu, K., He, X., Hitz, G. T., Dai, J., Pearse, A., Liu, B., Wang, H., Rubloff, G., et al. (2017) · Nature Materials · doi:10.1038/nmat4821 · Cited by 2,025
Zhu, Y., He, X., & Mo, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07517 · Cited by 1,936
Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives
Quartarone, E., & Mustarelli, P. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00081g · Cited by 1,607
High ionic conductivity in lithium lanthanum titanate
Inaguma, Y., Liquan, C., Itoh, M., Nakamura, T., Uchida, T., Ikuta, H., & Wakihara, M. (1993) · Solid State Communications · doi:10.1016/0038-1098(93)90841-a · Cited by 1,598
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Garnet-type solid-state fast Li ion conductors for Li batteries: critical review
Thangadurai, V., Narayanan, S., & Pinzaru, D. (2014) · Chemical Society Reviews · doi:10.1039/c4cs00020j · Cited by 1,534
Progress in flexible lithium batteries and future prospects
Zhou, G., Li, F., & Cheng, H.-M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43182g · Cited by 1,498
Review on solid electrolytes for all-solid-state lithium-ion batteries
Zheng, F., Kotobuki, M., Song, S., Lai, M. O., & Lu, L. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.022 · Cited by 1,397
Gao, Z., Sun, H., Fu, L., Ye, F., Zhang, Y., Luo, W., & Huang, Y. (2018) · Advanced Materials · doi:10.1002/adma.201705702 · Cited by 1,300
Inorganic solid Li ion conductors: An overview
Knauth, P. (2009) · Solid State Ionics · doi:10.1016/j.ssi.2009.03.022 · Cited by 1,170
Rechargeable Li2O2 Electrode for Lithium Batteries
Ogasawara, T., Débart, A., Holzapfel, M., Novák, P., & Bruce, P. G. (2006) · Journal of the American Chemical Society · doi:10.1021/ja056811q · Cited by 1,132
Electrochemical energy storage in a sustainable modern society
Goodenough, J. B. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42613k · Cited by 1,073
Progress and prospective of solid-state lithium batteries
Takada, K. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.034 · Cited by 1,056
Zhu, Y., He, X., & Mo, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08574h · Cited by 1,045
A Critical Review of Li/Air Batteries
Christensen, J., Albertus, P., Sanchez-Carrera, R. S., Lohmann, T., Kozinsky, B., Liedtke, R., Ahmed, J., & Kojic, A. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.086202jes · Cited by 1,041
All solid-state polymer electrolytes for high-performance lithium ion batteries
Yue, L., Ma, J., Zhang, J., Zhao, J., Dong, S., Liu, Z., Cui, G., & Chen, L. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.07.003 · Cited by 1,020
Self-citationPlating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte
Zhou, W., Wang, S., Li, Y., Xin, S., Manthiram, A., & Goodenough, J. B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05341 · Cited by 1,006
Ionic Conductivity of Solid Electrolytes Based on Lithium Titanium Phosphate
Aono, H., Sugimoto, E., Sadaoka, Y., Imanaka, N., & Adachi, G. (1990) · Journal of The Electrochemical Society · doi:10.1149/1.2086597 · Cited by 923
Ohta, N., Takada, K., Zhang, L., Ma, R., Osada, M., & Sasaki, T. (2006) · Advanced Materials · doi:10.1002/adma.200502604 · Cited by 899
Chen, R., Qu, W., Guo, X., Li, L., & Wu, F. (2016) · Materials Horizons · doi:10.1039/c6mh00218h · Cited by 797
A review of lithium and non-lithium based solid state batteries
Kim, J. G., Son, B., Mukherjee, S., Schuppert, N., Bates, A., Kwon, O., Choi, M. J., Chung, H. Y., & Park, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.054 · Cited by 783
Key challenges in future Li-battery research
Tarascon, J.-M. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0112 · Cited by 783
All‐Solid‐State Lithium‐Ion Microbatteries: A Review of Various Three‐Dimensional Concepts
Oudenhoven, J. F. M., Baggetto, L., & Notten, P. H. L. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000002 · Cited by 739
Mechanical Milling: a Top Down Approach for the Synthesis of Nanomaterials and Nanocomposites
Prasad Yadav, T., Manohar Yadav, R., & Pratap Singh, D. (2012) · Nanoscience and Nanotechnology · doi:10.5923/j.nn.20120203.01 · Cited by 736
Zheng, J., Tian, J., Wu, D., Gu, M., Xu, W., Wang, C., Gao, F., Engelhard, M. H., Zhang, J.-G., Liu, J., et al. (2014) · Nano Letters · doi:10.1021/nl404721h · Cited by 719
Self-citationChen, S., Xie, D., Liu, G., Mwizerwa, J. P., Zhang, Q., Zhao, Y., Xu, X., & Yao, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.020 · Cited by 696
Ionic conduction in nanocrystalline materials
Tuller, H. (2000) · Solid State Ionics · doi:10.1016/s0167-2738(00)00629-9 · Cited by 680
Sakuda, A., Hayashi, A., & Tatsumisago, M. (2010) · Chemistry of Materials · doi:10.1021/cm901819c · Cited by 651
Haruyama, J., Sodeyama, K., Han, L., Takada, K., & Tateyama, Y. (2014) · Chemistry of Materials · doi:10.1021/cm5016959 · Cited by 605
Electrical properties of amorphous lithium electrolyte thin films
BATES, J. (1992) · Solid State Ionics · doi:10.1016/0167-2738(92)90442-r · Cited by 600
The Crystal Structure of NaM2IV(PO4)3; MeIV = Ge, Ti, Zr.
Hagman, L., Kierkegaard, P., Karvonen, P., Virtanen, A. I., & Paasiv́irta, J. (1968) · Acta chemica Scandinavica/Acta chemica Scandinavica. B, Organic chemistry and biochemistry/Acta chemica Scandinavica. A, Physical and inorganic chemistry/Acta chemica Scandinavica. Series B. Organic chemistry and biochemistry/Acta chemica Scandinavica. Series A, Physical and inorganic chemistry · doi:10.3891/acta.chem.scand.22-1822 · Cited by 595
Park, K. H., Bai, Q., Kim, D. H., Oh, D. Y., Zhu, Y., Mo, Y., & Jung, Y. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800035 · Cited by 589
An O2 cathode for rechargeable lithium batteries: The effect of a catalyst
Débart, A., Bao, J., Armstrong, G., & Bruce, P. G. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.180 · Cited by 584
Emerging Applications of Atomic Layer Deposition for Lithium‐Ion Battery Studies
Meng, X., Yang, X., & Sun, X. (2012) · Advanced Materials · doi:10.1002/adma.201200397 · Cited by 573
Crystal structure and ionic conductivity of Li14Zn(GeO4)4 and other new Li+ superionic conductors
Hong, H. Y.-P. (1978) · Materials Research Bulletin · doi:10.1016/0025-5408(78)90075-2 · Cited by 553
Characterization of the Lithium/Oxygen Organic Electrolyte Battery
Read, J. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1498256 · Cited by 529
Hartmann, P., Leichtweiss, T., Busche, M. R., Schneider, M., Reich, M., Sann, J., Adelhelm, P., & Janek, J. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4051275 · Cited by 523
Recent progress and remaining challenges in sulfur-based lithium secondary batteries – a review
Bresser, D., Passerini, S., & Scrosati, B. (2013) · Chemical Communications · doi:10.1039/c3cc46131a · Cited by 514
Preparation of Li 2 S–P 2 S 5 Amorphous Solid Electrolytes by Mechanical Milling
Hayashi, A., Hama, S., Morimoto, H., Tatsumisago, M., & Minami, T. (2001) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2001.tb00685.x · Cited by 478
Challenges and perspectives of garnet solid electrolytes for all solid-state lithium batteries
Liu, Q., Geng, Z., Han, C., Fu, Y., Li, S., He, Y.-B., Kang, F., & Li, B. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.019 · Cited by 478
Mechanisms and properties of ion-transport in inorganic solid electrolytes
Zhang, B., Tan, R., Yang, L., Zheng, J., Zhang, K., Mo, S., Lin, Z., & Pan, F. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.08.015 · Cited by 464
Lithium-air batteries using hydrophobic room temperature ionic liquid electrolyte
Kuboki, T., Okuyama, T., Ohsaki, T., & Takami, N. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.082 · Cited by 445
Design and Preparation of Materials for Advanced Electrochemical Storage
Melot, B. C., & Tarascon, J.-M. (2013) · Accounts of Chemical Research · doi:10.1021/ar300088q · Cited by 435
Li, Z., Huang, Y., Yuan, L., Hao, Z., & Huang, Y. (2015) · Carbon · doi:10.1016/j.carbon.2015.03.008 · Cited by 429
A review of electrolytes for lithium–sulphur batteries
Scheers, J., Fantini, S., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.023 · Cited by 429
Superionic conductivity of glass-ceramics in the system Li 2 O- Al 2 O 3 -TiO 2 -P 2 O 5
Fu, J. (1997) · Solid State Ionics · doi:10.1016/s0167-2738(97)00018-0 · Cited by 420
Wang, C., Yang, Y., Liu, X., Zhong, H., Xu, H., Xu, Z., Shao, H., & Ding, F. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00336 · Cited by 419
Superior Stable and Long Life Sodium Metal Anodes Achieved by Atomic Layer Deposition
Zhao, Y., Goncharova, L. V., Lushington, A., Sun, Q., Yadegari, H., Wang, B., Xiao, W., Li, R., & Sun, X. (2017) · Advanced Materials · doi:10.1002/adma.201606663 · Cited by 366
Self-citationRecent progress in solid oxide and lithium ion conducting electrolytes research
Thangadurai, V., & Weppner, W. (2006) · Ionics · doi:10.1007/s11581-006-0013-7 · Cited by 353
Prospects and Limits of Energy Storage in Batteries
Abraham, K. M. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5026273 · Cited by 348
Nazar, L. F., Cuisinier, M., & Pang, Q. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.86 · Cited by 314
All-solid-state Li/S batteries with highly conductive glass–ceramic electrolytes
Hayashi, A., Ohtomo, T., Mizuno, F., Tadanaga, K., & Tatsumisago, M. (2003) · Electrochemistry Communications · doi:10.1016/s1388-2481(03)00167-x · Cited by 312
Stabilizing the Interface of NASICON Solid Electrolyte against Li Metal with Atomic Layer Deposition
Liu, Y., Sun, Q., Zhao, Y., Wang, B., Kaghazchi, P., Adair, K. R., Li, R., Zhang, C., Liu, J., Kuo, L.-Y., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06366 · Cited by 312
Orsini, F., Du Pasquier, A., Beaudoin, B., Tarascon, J. M., Trentin, M., Langenhuizen, N., De Beer, E., & Notten, P. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00128-1 · Cited by 310
Lithium-air and lithium-sulfur batteries
Bruce, P. G., Hardwick, L. J., & Abraham, K. M. (2011) · MRS Bulletin · doi:10.1557/mrs.2011.157 · Cited by 300
A novel high energy density rechargeable lithium/air battery
Zhang, T., Imanishi, N., Shimonishi, Y., Hirano, A., Takeda, Y., Yamamoto, O., & Sammes, N. (2010) · Chemical Communications · doi:10.1039/b920012f · Cited by 284
Inorganic–Organic Coating via Molecular Layer Deposition Enables Long Life Sodium Metal Anode
Zhao, Y., Goncharova, L. V., Zhang, Q., Kaghazchi, P., Sun, Q., Lushington, A., Wang, B., Li, R., & Sun, X. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02464 · Cited by 284
Cussen, E. J. (2006) · Chem. Commun. · doi:10.1039/b514640b · Cited by 257
Electrode materials for lithium secondary batteries prepared by sol–gel methods
FU, L., LIU, H., LI, C., WU, Y., RAHM, E., HOLZE, R., & WU, H. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.04.002 · Cited by 249
A high performance lithium-ion sulfur battery based on a Li2S cathode using a dual-phase electrolyte
Wang, L., Wang, Y., & Xia, Y. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00058k · Cited by 247
Liang, J.-Y., Zeng, X.-X., Zhang, X.-D., Wang, P.-F., Ma, J.-Y., Yin, Y.-X., Wu, X.-W., Guo, Y.-G., & Wan, L.-J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b03319 · Cited by 244
Lang, B., Ziebarth, B., & Elsässer, C. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01582 · Cited by 237
Arbi, K., Bucheli, W., Jiménez, R., & Sanz, J. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.11.023 · Cited by 232
Arbi, K., Mandal, S., Rojo, J. M., & Sanz, J. (2002) · Chemistry of Materials · doi:10.1021/cm010528i · Cited by 231
Effect of microcracking on ionic conductivity in LATP
Jackman, S. D., & Cutler, R. A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.06.081 · Cited by 217
Aono, H., Imanaka, N., & Adachi, G. (1994) · Accounts of Chemical Research · doi:10.1021/ar00045a002 · Cited by 211
Safe and Durable High-Temperature Lithium–Sulfur Batteries via Molecular Layer Deposited Coating
Li, X., Lushington, A., Sun, Q., Xiao, W., Liu, J., Wang, B., Ye, Y., Nie, K., Hu, Y., Xiao, Q., et al. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b00577 · Cited by 185
Self-citationStabilizing interface between Li10SnP2S12 and Li metal by molecular layer deposition
Wang, C., Zhao, Y., Sun, Q., Li, X., Liu, Y., Liang, J., Li, X., Lin, X., Li, R., Adair, K. R., et al. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.08.030 · Cited by 162
Self-citationLiu, J., & Sun, X. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/2/024001 · Cited by 158
Molecular Layer Deposition for Energy Conversion and Storage
Zhao, Y., & Sun, X. A. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00145 · Cited by 151
Solid state thin-film lithium battery systems
Dudney, N. J., & Neudecker, B. J. (1999) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(99)00052-2 · Cited by 140
Advanced hybrid Li–air batteries with high-performance mesoporous nanocatalysts
Li, L., Chai, S., Dai, S., & Manthiram, A. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00814f · Cited by 139
Dopant Segregation and Space Charge Effects in Proton-Conducting BaZrO 3 Perovskites
Shirpour, M., Rahmati, B., Sigle, W., van Aken, P. A., Merkle, R., & Maier, J. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp208213x · Cited by 138
Rechargeable alkali-ion cathode-flow battery
Lu, Y., & Goodenough, J. B. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04222f · Cited by 137
Hybrid Lithium–Sulfur Batteries with a Solid Electrolyte Membrane and Lithium Polysulfide Catholyte
Yu, X., Bi, Z., Zhao, F., & Manthiram, A. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04209 · Cited by 126
Kali, R., & Mukhopadhyay, A. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.010 · Cited by 121
Structure and thermal expansion of LiGe2(PO4)3
Alami, M., Brochu, R., Soubeyroux, J. L., Gravereau, P., Flem, G. L., & Hagenmuller, P. (1991) · Journal of Solid State Chemistry · doi:10.1016/0022-4596(91)90134-4 · Cited by 120
Xu, X., Wen, Z., Yang, X., & Chen, L. (2007) · Materials Research Bulletin · doi:10.1016/j.materresbull.2007.08.007 · Cited by 116
Weiß, M., Weber, D. A., Senyshyn, A., Janek, J., & Zeier, W. G. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b00842 · Cited by 115
A Li-air fuel cell with recycle aqueous electrolyte for improved stability
He, P., Wang, Y., & Zhou, H. S. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2010.09.025 · Cited by 112
Li, L., Liu, C., He, G., Fan, D., & Manthiram, A. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02616d · Cited by 112
Spark Plasma Sintering of LiTi 2 (PO 4 ) 3 ‐Based Solid Electrolytes
Chang, C., Lee, Y. I., Hong, S., & Park, H. (2005) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2005.00246.x · Cited by 112
Kim, H., Oh, Y., Kang, K. H., Kim, J. H., Kim, J., & Yoon, C. S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15305 · Cited by 109
Hupfer, T., Bucharsky, E. C., Schell, K. G., et al. (2016) · Solid State Ionics · doi:10.1016/j.ssi.2016.10.008 · Cited by 104
Robust Metallic Lithium Anode Protection by the Molecular‐Layer‐Deposition Technique
Zhao, Y., Goncharova, L. V., Sun, Q., Li, X., Lushington, A., Wang, B., Li, R., Dai, F., Cai, M., & Sun, X. A. (2018) · Small Methods · doi:10.1002/smtd.201700417 · Cited by 104
Self-citationPérez‐Estébanez, M., Isasi‐Marin, J., Többens, D. M., Rivera, A., & Leon, C. (2014) · Solid State Ionics · doi:10.1016/j.ssi.2014.07.018 · Cited by 97
Redhammer, G. J., Rettenwander, D., Pristat, S., Dashjav, E., Kumar, C. M. N., Topa, D., & Tietz, F. (2016) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2016.08.011 · Cited by 96
Sol–gel synthesis of Li1.5Al0.5Ge1.5(PO4)3 solid electrolyte
Kotobuki, M., & Koishi, M. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.03.064 · Cited by 86
Superionic bulk conductivity in Li1.3Al0.3Ti1.7(PO4)3 solid electrolyte
Mertens, A., Yu, S., Schön, N., Gunduz, D. C., Tempel, H., Schierholz, R., Hausen, F., Kungl, H., Granwehr, J., & Eichel, R. (2017) · Solid State Ionics · doi:10.1016/j.ssi.2017.07.023 · Cited by 86
Wang, D., Yang, J., Liu, J., Li, X., Li, R., Cai, M., Sham, T., & Sun, X. A. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13677a · Cited by 83
Self-citationSpace charge depletion in grain boundaries of BaZrO3 proton conductors
Shirpour, M., Merkle, R., & Maier, J. (2012) · Solid State Ionics · doi:10.1016/j.ssi.2012.03.026 · Cited by 76
Safanama, D., & Adams, S. N. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.11.076 · Cited by 63
Improved lithium-ion transport in NASICON-type lithium titanium phosphate by calcium and iron doping
Ortiz, G. F., López, M. C., Lavela, P., Vidal-Abarca, C., & Tirado, J. L. (2013) · Solid State Ionics · doi:10.1016/j.ssi.2013.09.012 · Cited by 61
Lithium ion migration pathways in LiTi2(PO4)3 and related materials
Nuspl, G., Takeuchi, T., Weiß, A., Kageyama, H., Yoshizawa, K., & Yamabe, T. (1999) · Journal of Applied Physics · doi:10.1063/1.371550 · Cited by 60
Schroeder, M., Glatthaar, S., & Binder, J. R. (2011) · Solid State Ionics · doi:10.1016/j.ssi.2011.08.014 · Cited by 60
Wong, S., Newman, P. J., Best, A. S., Nairn, K. M., Macfarlane, D. R., & Forsyth, M. (1998) · Journal of Materials Chemistry · doi:10.1039/a802752h · Cited by 57
Sun, C., Huang, X., Jin, J. H., Lu, Y., Wang, Q., Yang, J., & Wen, Z. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.063 · Cited by 55
Zhang, P., Matsui, M., Takeda, Y., Yamamoto, O., & Imanishi, N. (2014) · Solid State Ionics · doi:10.1016/j.ssi.2014.04.017 · Cited by 54
Sakuda, A., Kitaura, H., Hayashi, A., Tatsumisago, M., Hosoda, Y., Nagakane, T., & Sakamoto, A. (2012) · Chemistry Letters · doi:10.1246/cl.2012.260 · Cited by 33
Imidazole-buffered acidic catholytes for hybrid Li–air batteries with high practical energy density
Li, L., Fu, Y., & Manthiram, A. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.07.027 · Cited by 32
Orliukas, A. F., Šalkus, T., Kežionis, A., Dindūne, A., Kanepe, Z., Ronis, J., Venckutė, V., Kazlauskienė, V., Miškinis, J., & Lukauskas, A. (2012) · Solid State Ionics · doi:10.1016/j.ssi.2012.05.011 · Cited by 26
A novel approach in controlling the conductivity of thin films using molecular layer deposition
Lushington, A., Liu, J., Bannis, M. N., Xiao, B., Lawes, S., Li, R., & Sun, X. A. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.09.155 · Cited by 21
Lithium conducting amorphous solid electrolytes obtained by explosion method
Imanaka, N., Shimizu, T., & Adachi, G. (1993) · Solid State Ionics · doi:10.1016/0167-2738(93)90368-d · Cited by 14
Cited by
Lu, Y., Zhao, C., Yuan, H., Cheng, X., Huang, J., & Zhang, Q. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009925 · Cited by 562
Interface Issues and Challenges in All‐Solid‐State Batteries: Lithium, Sodium, and Beyond
Lou, S., Zhang, F., Fu, C., Chen, M., Ma, Y., Yin, G., & Wang, J. (2021) · Advanced Materials · doi:10.1002/adma.202000721 · Cited by 548
Self-citationSulfide and Oxide Inorganic Solid Electrolytes for All-Solid-State Li Batteries: A Review
Reddy, M. V., Julien, C. M., Mauger, A., & Zaghib, K. (2020) · Nanomaterials · doi:10.3390/nano10081606 · Cited by 331
Hao, X., Zhao, Q., Su, S., Zhang, S., Ma, J., Shen, L., Yu, Q., Zhao, L., Liu, Y., Kang, F., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901604 · Cited by 272
Advances, challenges, and environmental impacts in metal–air battery electrolytes
Salado, M., & Lizundia, E. (2022) · Materials Today Energy · doi:10.1016/j.mtener.2022.101064 · Cited by 108
Metadata
- Authors
- Xiao, W., Wang, J., Fan, L., Zhang, J., & Li, X.
- Venue
- Energy Storage Materials
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 19
- Pages
- 379-400
- ISSN
- 2405-8289 (ISSN-L)
- 2405-8297
- OpenAlex
- W2897845919
- Cited by
- 374
- References
- 125
- FWCI
- 9.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.