The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
3D printing of magneto-active smart materials for advanced actuators and soft robotics applications
Open accessAbstract
In the contemporary era, novel manufacturing technologies like additive manufacturing (AM) have revolutionized the different engineering sectors including biomedical, aerospace, electronics, etc. Four-dimensional (4D) printing aka AM of smart materials is gaining popularity among the scientific community, which has the excellent ability to make soft structures such as soft robots, actuators, and grippers. These soft structures are developed by applying various stimuli such as pH, temperature, magnetic field, and many combinations onto soft materials. Stimuli in 3D printing permit various shape-morphing behaviors such as bending, twisting, folding, swelling, rolling, shrinking, origami, or locomotion. A wide variety of soft magnetic structures can be fabricated through the incorporation of soft or hard magnetic particles into soft materials resulting in magneto-active soft materials (MASMs). With this integration, magneto-thermal coupling actuation allows diverse magneto-deformations, facilitating the development of personalized devices that are capable of enhanced deformation. In this review, guidelines are provided on the 3D printing for MASMs such as magneto-active polymers (MAPs), magneto-active composites, and magneto-active hydrogels (MAHs) on the booming development of various smart and flexible devices such as soft robots, wearable electronics, and biomimetic devices. Moreover, 3D-printed soft robotics have an outstanding capacity to adapt to complicated situations for many advanced actuating applications. Finally, some current challenges and emerging areas in this exciting technology have been proposed. Lastly, it is anticipated that technological advancements in developing smart and intelligent magneto-active structures will have a significant impact on the design of real-world applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495
Biomedical applications of soft robotics
Cianchetti, M., Laschi, C., Menciassi, A., & Dario, P. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0022-y · Cited by 1,435
Zhao, Q., Qi, H. J., & Xie, T. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.001 · Cited by 1,409
Liu, X., Liu, J., Lin, S., & Zhao, X. (2020) · Materials Today · doi:10.1016/j.mattod.2019.12.026 · Cited by 1,023
Multifunctional Shape‐Memory Polymers
Behl, M., Razzaq, M. Y., & Lendlein, A. (2010) · Advanced Materials · doi:10.1002/adma.200904447 · Cited by 971
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
Self-citationThe recent development of vat photopolymerization: A review
Zhang, F., Zhu, L., Li, Z., Wang, S., Shi, J., Tang, W., Li, N., & Yang, J. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102423 · Cited by 375
4D Printed Actuators with Soft-Robotic Functions
López‐Valdeolivas, M., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700710 · Cited by 371
3D printed reversible shape changing components with stimuli responsive materials
Mao, Y., Ding, Z., Yuan, C., Ai, S., Isakov, M., Wu, J., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24761 · Cited by 348
Shape-memory polymers for multiple applications in the materials world
Pilate, F., Toncheva, A., Dubois, P., & Raquez, J.-M. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.05.004 · Cited by 332
Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
Lee, A. Y., An, J., & Chua, C. K. (2017) · Engineering · doi:10.1016/j.eng.2017.05.014 · Cited by 326
From 3D to 4D printing: Approaches and typical applications
Zhou, Y., Huang, W. M., Kang, S. F., Wu, X. L., Lu, H. B., Fu, J., & Cui, H. (2015) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-015-0925-0 · Cited by 224
Two-Way and Multiple-Way Shape Memory Polymers for Soft Robotics: An Overview
Scalet, G. (2020) · Actuators · doi:10.3390/act9010010 · Cited by 209
Research Progress of Shape Memory Polymer and 4D Printing in Biomedical Application
Zhao, W., Yue, C., Liu, L., Liu, Y., & Leng, J. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202201975 · Cited by 183
4D printing materials for vat photopolymerization
Andreu, A., Su, P.-C., Kim, J.-H., Ng, C. S., Kim, S., Kim, I., Lee, J., Noh, J., Subramanian, A. S., & Yoon, Y.-J. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102024 · Cited by 181
Magnetic Living Hydrogels for Intestinal Localization, Retention, and Diagnosis
Liu, X., Yang, Y., Inda, M. E., Lin, S., Wu, J., Kim, Y., Chen, X., Ma, D., Lu, T. K., & Zhao, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010918 · Cited by 175
Technological considerations for 4D printing: An overview
Pei, E., & Loh, G. H. (2018) · Progress in Additive Manufacturing · doi:10.1007/s40964-018-0047-1 · Cited by 171
From 3D to 4D printing—Design, material and fabrication for multi-functional multi-materials
Khare, V., Sonkaria, S., Lee, G.-Y., Ahn, S.-H., & Chu, W.-S. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0035-9 · Cited by 88
3D printing of tunable shape memory polymer blends
Chen, S., Zhang, Q., & Feng, J. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc02534c · Cited by 80
Biomaterial types, properties, medical applications, and other factors: a recent review
Agrawal, R., Kumar, A., Mohammed, M. K. A., & Singh, S. (2023) · Journal of Zhejiang University-SCIENCE A · doi:10.1631/jzus.a2200403 · Cited by 55
Metadata
- Authors
- Khalid, M. Y., Arif, Z. U., Tariq, A., Hossain, M., Ahmed Khan, K., & Umer, R.
- Venue
- European Polymer Journal
- Publisher
- Elsevier BV
- Published
- 2024-02
- Volume
- 205
- Pages
- 112718
- ISSN
- 0014-3057 (ISSN-L)
- OpenAlex
- W4390508827
- Cited by
- 190
- References
- 22
- FWCI
- 25.46
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.