The DOI matches its Crossref record; 204 of the 204 references it cites were found in a registry or an index.
Construction and built environment in circular economy: A comprehensive literature review
Abstract
Abstract Unlike Linear Economy (LE), Circular Economy (CE) considers resources in a continuously cyclical way within the environment. Yet literature lacks a review of Construction and Built Environment (CBE) as a whole under CE in which resources flow from a material form to complex products. By presenting the first integrated literature review of Construction and Built environment in Circular Economy (CBECE), this study aims to (i) demonstrate development trends and diversity within CBECE literature, (ii) investigate the state of the literature, gaps, and understudied fields and (iii) highlight key findings, critical reviews, proposals, and future research ideas. Based on a systematic literature review and a descriptive analysis the study found that: •CBECE literature remains at an early stage despite recent growth in academic interest. •90% of CBECE literature was published between 2017-2020 with subject diversity increasing over the years. •A substantial portion of the literature was conducted in China and published by the Journal of Cleaner Production. •Within 238 papers reviewed, “Waste” was the most frequently used term in CBECE literature. •To visualize publishing trends more comprehensively, the number of published papers by the end of 2020 is predicted to be over 120, as a novel approach for literature review studies submitted halfway through the year. Based on a unique three-tier framework with Scale, Stage, and Subject dimensions it is found that: •“Waste Valorization” and “CE Promotion and Transition” are the two most studied CBECE subjects while “Earth Construction” and “Decoupling” are the two least studied CBECE subjects. •“Material” and “Area” are the most and least studied built environment scales, respectively. •“Operation” and “Design” are the most and least studied construction stages, respectively. •“Waste Valorization” is the most studied CE subject in the “Material” scale at the “Construction” stage. •No study was found for the “Area” scale at the stages of “Design”, “Manufacturing” and “End of Life”. •Few studies were found for “Building” and “City” scales at the “Manufacturing” stage and “Area” level at the “Planning” stage. The literature synthesis showed that: •The construction industry has been struggling to embrace CE principles because of being a highly profit-driven industry with short-term goals and conflicting expectations by its key stakeholders. This may also affect the maturity of waste valorization due to long transportation distances and additional recycling processes and treatment as they increase the ultimate cost of reclaiming. •This review emphasizes that the literature needs to consider the diversity of stakeholder type, interest, and motivation and their influence on different lifecycle stages to achieve CE in CBE. •In order to maintain a circular built environment, studies show that material banks along with deconstructability of the components are vital pieces of CE ensuring the close loop of the resources. •Flexible buildings with adaptive reuse and modularity do not only bring social benefits such as affordable housing but also efficiency and health benefits when combined with circular design principles. •On a greater scale, industrial CE areas provide a valuable environment to evaluate CE transition and its consequences while cities call for a system dynamics approach to further understand urban transition under different policies and regulations. Among several proposals and future research ideas, this review proposes a Dynamic Circular Economy (DCE) approach due to the variety of built environment scales and construction stages. Finally, a new “R” principle (Replace) is proposed as a result of reviewing the literature under the existing 10 “R” principles of CE.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
IOP Conference Series: Earth and Environmental Science
(2020) · IOP Conference Series Earth and Environmental Science · doi:10.1088/issn.1755-1315 · Cited by 12,764
A guide to the project management body of knowledge (PMBOK guide)
Pmbok (2004) · Cited by 4,316
Systematic Reviews in the Social Sciences: A Practical Guide
Petticrew, M., & Roberts, H. (2006) · doi:10.1002/9780470754887 · Cited by 3,586
Conducting research literature reviews: from the Internet to paper
(2005) · Choice Reviews Online · doi:10.5860/choice.42-6198 · Cited by 1,854
A Guide to Conducting a Systematic Literature Review of Information Systems Research
Okoli, C., & Schabram, K. (2011) · doi:10.2139/ssrn.1954824 · Cited by 1,849
The Economics of the Coming Spaceship Earth
Boulding, K. E. (2003) · Cited by 1,291
Zabalza Bribián, I., Valero Capilla, A., & Aranda Usón, A. (2011) · Building and Environment · doi:10.1016/j.buildenv.2010.12.002 · Cited by 1,287
Circular economy for the built environment: A research framework
Pomponi, F., & Moncaster, A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.055 · Cited by 1,169
Sustainable Construction: Green Building Design and Delivery
Kibert, C. J. (2005) · Cited by 1,098
Construction and demolition waste management in China through the 3R principle
Huang, B., Wang, X., Kua, H., Geng, Y., Bleischwitz, R., & Ren, J. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.029 · Cited by 1,047
Circular economy in the construction industry: A systematic literature review
Benachio, G. L. F., Freitas, M. D. C. D., & Tavares, S. F. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121046 · Cited by 941
Sustainable Construction: Green Building Design and Delivery
Berardi, U. (2013) · Intelligent Buildings International · doi:10.1080/17508975.2012.756388 · Cited by 904
Systematic Review and Evidence Synthesis as a Practice and Scholarship Tool
Briner, R. B., & Denyer, D. (2012) · The Oxford Handbook of Evidence-Based Management · doi:10.1093/oxfordhb/9780199763986.013.0007 · Cited by 835
Jacobsen, N. B. (2006) · Journal of Industrial Ecology · doi:10.1162/108819806775545411 · Cited by 816
Construction and demolition waste best management practice in Europe
Gálvez-Martos, J.-L., Styles, D., Schoenberger, H., & Zeschmar-Lahl, B. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.04.016 · Cited by 816
Circular Economy: Measuring Innovation in the Product Chain
Potting, J., Hekkert, M. P., Worrell, E., & Hanemaaijer, A. (2017) · Utrecht University Repository (Utrecht University) · Cited by 796
Ghisellini, P., Ripa, M., & Ulgiati, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.207 · Cited by 706
Foster, G. (2020) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.104507 · Cited by 558
López Ruiz, L. A., Roca Ramón, X., & Gassó Domingo, S. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119238 · Cited by 538
Review of construction and demolition waste management in China and USA
Aslam, M. S., Huang, B., & Cui, L. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2020.110445 · Cited by 534
Ghaffar, S. H., Burman, M., & Braimah, N. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118710 · Cited by 531
Circular Economy in the building sector: Three cases and a collaboration tool
Leising, E., Quist, J., & Bocken, N. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.010 · Cited by 527
Comparing linear and circular supply chains: A case study from the construction industry
Nasir, M. H. A., Genovese, A., Acquaye, A. A., Koh, S. C. L., & Yamoah, F. (2017) · International Journal of Production Economics · doi:10.1016/j.ijpe.2016.06.008 · Cited by 503
Kjaer, L. L., Pigosso, D. C. A., Niero, M., Bech, N. M., & McAloone, T. C. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12747 · Cited by 490
Prioritizing barriers to adopt circular economy in construction and demolition waste management
Mahpour, A. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.01.026 · Cited by 490
Smol, M., Kulczycka, J., Henclik, A., Gorazda, K., & Wzorek, Z. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.051 · Cited by 487
Salvaging building materials in a circular economy: a BIM-based whole-life performance estimator
Akanbi, L. A., Oyedele, L. O., Akinade, O. O., Ajayi, A. O., Davila Delgado, M., Bilal, M., & Bello, S. A. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.10.026 · Cited by 468
Munaro, M. R., Tavares, S. F., & Bragança, L. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121134 · Cited by 445
Sariatli, F. (2017) · Visegrad Journal on Bioeconomy and Sustainable Development · doi:10.1515/vjbsd-2017-0005 · Cited by 412
Rocco, T. S., & Plakhotnik, M. S. (2009) · Human Resource Development Review · doi:10.1177/1534484309332617 · Cited by 393
Jin, R., Yuan, H., & Chen, Q. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.09.029 · Cited by 380
Silva, R. V., de Brito, J., & Dhir, R. K. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.117629 · Cited by 360
Wu, Z., Yu, A. T. W., & Shen, L. (2017) · Waste Management · doi:10.1016/j.wasman.2016.09.001 · Cited by 356
Links between circular economy and climate change mitigation in the built environment
Gallego-Schmid, A., Chen, H.-M., Sharmina, M., & Mendoza, J. M. F. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121115 · Cited by 340
Hao, J. L., Cheng, B., Lu, W., Xu, J., Wang, J., Bu, W., & Zhiping, G. (2020) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2020.137870 · Cited by 335
A Descriptive Literature Review and Classification of Cloud Computing Research
Yang, H., & Tate, M. (2012) · Communications of the Association for Information Systems · doi:10.17705/1cais.03102 · Cited by 330
Properties of concrete paving blocks made with waste marble
Gencel, O., Ozel, C., Koksal, F., Erdogmus, E., Martínez-Barrera, G., & Brostow, W. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.08.023 · Cited by 326
A comprehensive framework for the production of mycelium-based lignocellulosic composites
Elsacker, E., Vandelook, S., Van Wylick, A., Ruytinx, J., De Laet, L., & Peeters, E. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.138431 · Cited by 308
Nußholz, J. L. K., Nygaard Rasmussen, F., & Milios, L. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.10.036 · Cited by 277
Esa, M. R., Halog, A., & Rigamonti, L. (2017) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-016-0516-x · Cited by 275
Strategies for Applying the Circular Economy to Prefabricated Buildings
Minunno, R., O’Grady, T., Morrison, G. M., Gruner, R. L., & Colling, M. (2018) · Buildings · doi:10.3390/buildings8090125 · Cited by 270
Disassembly and deconstruction analytics system (D-DAS) for construction in a circular economy
Akanbi, L. A., Oyedele, L. O., Omoteso, K., Bilal, M., Akinade, O. O., Ajayi, A. O., Davila Delgado, J. M., & Owolabi, H. A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.172 · Cited by 270
Toward a Resource‐Efficient Built Environment: A Literature Review and Conceptual Model
Ness, D. A., & Xing, K. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12586 · Cited by 268
Bao, Z., & Lu, W. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.138264 · Cited by 262
Understanding and overcoming the barriers to structural steel reuse, a UK perspective
Densley Tingley, D., Cooper, S., & Cullen, J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.006 · Cited by 261
Ghisellini, P., Ji, X., Liu, G., & Ulgiati, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.05.084 · Cited by 244
Modelling global material stocks and flows for residential and service sector buildings towards 2050
Deetman, S., Marinova, S., van der Voet, E., van Vuuren, D. P., Edelenbosch, O., & Heijungs, R. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118658 · Cited by 243
Quantifying and mapping embodied environmental requirements of urban building stocks
Stephan, A., & Athanassiadis, A. (2017) · Building and Environment · doi:10.1016/j.buildenv.2016.11.043 · Cited by 234
Gravagnuolo, A., Angrisano, M., & Fusco Girard, L. (2019) · Sustainability · doi:10.3390/su11133512 · Cited by 234
Bao, Z., Lu, W., Chi, B., Yuan, H., & Hao, J. (2019) · Waste Management · doi:10.1016/j.wasman.2019.08.031 · Cited by 231
Components reuse in the building sector – A systematic review
Rakhshan, K., Morel, J.-C., Alaka, H., & Charef, R. (2020) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x20910463 · Cited by 228
Recycled fibers in reinforced concrete: A systematic literature review
Merli, R., Preziosi, M., Acampora, A., Lucchetti, M. C., & Petrucci, E. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119207 · Cited by 227
Fratini, C. F., Georg, S., & Jørgensen, M. S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.193 · Cited by 222
Evolution of industrial symbiosis in an eco-industrial park in China
Yu, F., Han, F., & Cui, Z. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.10.058 · Cited by 219
Jain, S., Singhal, S., Jain, N. K., & Bhaskar, K. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121405 · Cited by 218
Encyclopedia of Corporate Social Responsibility
(2014) · Reference Reviews · doi:10.1108/rr-03-2014-0061 · Cited by 214
Honic, M., Kovacic, I., & Rechberger, H. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.212 · Cited by 212
Sun, L., Li, H., Dong, L., Fang, K., Ren, J., Geng, Y., Fujii, M., Zhang, W., Zhang, N., & Liu, Z. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2016.06.007 · Cited by 206
Life cycle assessment of a Danish office building designed for disassembly
Eberhardt, L. C. M., Birgisdóttir, H., & Birkved, M. (2019) · Building Research & Information · doi:10.1080/09613218.2018.1517458 · Cited by 202
Chen, W., Jin, R., Xu, Y., Wanatowski, D., Li, B., Yan, L., Pan, Z., & Yang, Y. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.05.130 · Cited by 202
Approaches for a low-carbon production of building materials: A review
Orsini, F., & Marrone, P. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118380 · Cited by 202
Hossain, M. U., & Ng, S. T. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.120 · Cited by 198
Global construction materials database and stock analysis of residential buildings between 1970-2050
Marinova, S., Deetman, S., van der Voet, E., & Daioglou, V. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119146 · Cited by 195
Simulation optimisation towards energy efficient green buildings: Current status and future trends
Gan, V. J. L., Lo, I. M. C., Ma, J., Tse, K. T., Cheng, J. C. P., & Chan, C. M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120012 · Cited by 194
Circular cities: exploring local government strategies to facilitate a circular economy
Bolger, K., & Doyon, A. (2019) · European Planning Studies · doi:10.1080/09654313.2019.1642854 · Cited by 191
Anastasiades, K., Blom, J., Buyle, M., & Audenaert, A. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109522 · Cited by 191
The Potential Use of Oyster Shell Waste in New Value-Added By-Product
H. Silva, T., Mesquita-Guimarães, J., Henriques, B., Silva, F. S., & Fredel, M. C. (2019) · Resources · doi:10.3390/resources8010013 · Cited by 187
Strategies for minimizing construction and demolition wastes in Malaysia
Esa, M. R., Halog, A., & Rigamonti, L. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2016.12.014 · Cited by 186
Evaluation of Urban circular economy development: An empirical research of 40 cities in China
Wang, N., Lee, J. C. K., Zhang, J., Chen, H., & Li, H. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.01.089 · Cited by 185
City level circular transitions: Barriers and limits in Amsterdam, Utrecht and The Hague
Campbell-Johnston, K., Cate, J. T., Elfering-Petrovic, M., & Gupta, J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.06.106 · Cited by 184
Nuñez-Cacho, P., Górecki, J., Molina-Moreno, V., & Corpas-Iglesias, F. A. (2018) · Sustainability · doi:10.3390/su10072340 · Cited by 182
Buyle, M., Galle, W., Debacker, W., & Audenaert, A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.306 · Cited by 177
Pan, S.-Y., Chung, T.-C., Ho, C.-C., Hou, C.-J., Chen, Y.-H., & Chiang, P.-C. (2017) · Scientific Reports · doi:10.1038/s41598-017-17648-9 · Cited by 176
Akinade, O. O., & Oyedele, L. O. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.232 · Cited by 173
Arora, M., Raspall, F., Cheah, L., & Silva, A. (2020) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.104581 · Cited by 172
Capital project planning for a circular economy
Sanchez, B., & Haas, C. T. (2018) · Construction Management and Economics · doi:10.1080/01446193.2018.1435895 · Cited by 168
Athira, G., Bahurudeen, A., Appari, S., & Nanthagopalan, P. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.252 · Cited by 165
Hossain, M. U., & Ng, S. T. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.11.010 · Cited by 162
Kalmykova, Y., Rosado, L., & Patrício, J. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.02.027 · Cited by 159
A novel selective disassembly sequence planning method for adaptive reuse of buildings
Sanchez, B., & Haas, C. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.201 · Cited by 158
Urban waste flows and their potential for a circular economy model at city-region level
Zeller, V., Towa, E., Degrez, M., & Achten, W. (2018) · Waste Management · doi:10.1016/j.wasman.2018.10.034 · Cited by 158
Plastic waste management, a matter for the ‘community’
Drzyzga, O., & Prieto, M. A. (2018) · Microbial Biotechnology · doi:10.1111/1751-7915.13328 · Cited by 151
Zhao, H., Zhao, H., & Guo, S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.041 · Cited by 147
Jiménez-Rivero, A., Sathre, R., & Navarro, J. G. (2016) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2016.01.014 · Cited by 146
Liu, Z., Adams, M., Côté, R. P., Geng, Y., & Li, Y. (2016) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2016.06.012 · Cited by 145
van Leeuwen, K., de Vries, E., Koop, S., & Roest, K. (2018) · Environmental Management · doi:10.1007/s00267-018-0995-8 · Cited by 143
Reusing exterior wall framing systems: A cradle-to-cradle comparative life cycle assessment
Rios, F. C., Grau, D., & Chong, W. K. (2019) · Waste Management · doi:10.1016/j.wasman.2019.05.040 · Cited by 141
Design for Change and Circularity – Accommodating Circular Material & Product Flows in Construction
Geldermans, R. J. (2016) · Energy Procedia · doi:10.1016/j.egypro.2016.09.153 · Cited by 135
Material stocks in Germany's non-domestic buildings: a new quantification method
Ortlepp, R., Gruhler, K., & Schiller, G. (2015) · Building Research & Information · doi:10.1080/09613218.2016.1112096 · Cited by 135
Ness, D. A. (2010) · International Journal of Sustainable Development & World Ecology · Cited by 133
Verbinnen, B., Billen, P., Caneghem, J. V., & Vandecasteele, C. (2016) · Waste and Biomass Valorization · doi:10.1007/s12649-016-9704-0 · Cited by 132
Jayasinghe, L. B., & Waldmann, D. (2020) · Sustainability · doi:10.3390/su12051766 · Cited by 131
Puthussery, J. V., Kumar, R., & Garg, A. (2016) · Waste Management · doi:10.1016/j.wasman.2016.06.008 · Cited by 128
Regional development of Circular Economy in the European Union: A multidimensional analysis
Silvestri, F., Spigarelli, F., & Tassinari, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120218 · Cited by 126
Sustainability policy of construction contractors: A review
Zuo, J., Zillante, G., Wilson, L., Davidson, K. M., & Pullen, S. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.03.011 · Cited by 125
Lazarevic, D., Kautto, P., & Antikainen, R. (2019) · Forest Policy and Economics · doi:10.1016/j.forpol.2019.01.006 · Cited by 124
Sanchez, B., Rausch, C., Haas, C. T., & Saari, R. K. (2019) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2019.104605 · Cited by 118
Recovery and reuse of structural products from end-of-life buildings
Hopkinson, P., Chen, H.-M., Zhou, K., Wang, Y., & Lam, D. (2019) · Proceedings of the Institution of Civil Engineers - Engineering Sustainability · doi:10.1680/jensu.18.00007 · Cited by 115
Wuyts, W., Miatto, A., Sedlitzky, R., & Tanikawa, H. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.258 · Cited by 113
Mondal, M. K., Bose, B. P., & Bansal, P. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.03.016 · Cited by 110
Life cycle carbon dioxide assessment tool for buildings in the schematic design phase
Baek, C., Park, S.-H., Suzuki, M., & Lee, S.-H. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.01.025 · Cited by 108
Fregonara, E., Giordano, R., Ferrando, D. G., & Pattono, S. (2017) · Buildings · doi:10.3390/buildings7030065 · Cited by 107
Comparison of construction and demolition waste management between Brazil, European Union and USA
Nunes, K. R. A., & Mahler, C. (2020) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x20902814 · Cited by 107
Identifying Barriers to the Systematic Literature Review Process
Carver, J. C., Hassler, E. E., Hernandes, E. C. M., & Kraft, N. A. (2013) · Proceedings of the ... ACM-IEEE International Symposium on Empirical Software Engineering and Measurement/International Symposium on Empirical Software Engineering and Measurement · doi:10.1109/esem.2013.28 · Cited by 104
What Hinders the Development of Green Building? An Investigation of China
Wu, Z., Jiang, M., Cai, Y., Wang, H., & Li, S. (2019) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph16173140 · Cited by 104
Construction Planning, Programming and Control
Cooke, B., & Williams, P. A. (1998) · doi:10.1007/978-1-349-14293-4 · Cited by 103
Modularisation as enabler of circular economy in energy infrastructure
Mignacca, B., Locatelli, G., & Velenturf, A. P. M. (2020) · Energy Policy · doi:10.1016/j.enpol.2020.111371 · Cited by 101
Cheng, H. L., Dong, S., Li, F., Yang, Y., Li, Y., & Li, Z. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.014 · Cited by 100
Embodying circularity through usable relocatable modular buildings
Kyrö, R., Jylhä, T., & Peltokorpi, A. (2019) · Facilities · doi:10.1108/f-12-2017-0129 · Cited by 100
Modeling material flows and stocks of the road network in the United States 1905–2015
Miatto, A., Schandl, H., Wiedenhofer, D., Krausmann, F., & Tanikawa, H. (2017) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2017.08.024 · Cited by 99
Global status report 2016: towards zero-emission efficient and resilient buildings
Dean, B., Dulac, J., Petrichenko, K., & Graham, P. (2016) · Technical University of Denmark, DTU Orbit (Technical University of Denmark, DTU) · Cited by 98
Ali, A. K., Wang, Y., & Alvarado, J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.06.202 · Cited by 98
The low-entropy city: A thermodynamic approach to reconnect urban systems with nature
Pelorosso, R., Gobattoni, F., & Leone, A. (2017) · Landscape and Urban Planning · doi:10.1016/j.landurbplan.2017.10.002 · Cited by 94
Wong, Y. C., Al-Obaidi, K. M., & Mahyuddin, N. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.04.145 · Cited by 94
Викторовна, Б. Н., Фасеева, Г. Р., Kabirov, R. R., Nafikov, R. M., & Zakharov, Y. A. (2016) · Waste Management · doi:10.1016/j.wasman.2016.11.008 · Cited by 93
Assessing the sustainability of urban eco-systems through Emergy-based circular economy indicators
Santagata, R., Zucaro, A., Viglia, S., Ripa, M., Tian, X., & Ulgiati, S. (2019) · Ecological Indicators · doi:10.1016/j.ecolind.2019.105859 · Cited by 92
Górecki, J., Utrilla, P. N.-C., Corpas-Iglesias, F. A., & Moreno, V. M. (2019) · Cogent Engineering · doi:10.1080/23311916.2019.1690760 · Cited by 92
Scientific Inquiry in Social Work
DeCarlo, M. P. (2018) · AUSpace (Athabasca University) · Cited by 91
Valorization of agro-industry residues in the building and environmental sector: A review
Ricciardi, P., Cillari, G., Miino, M. C., & Collivignarelli, M. C. (2020) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x20904426 · Cited by 88
Gao, C., Gao, C., Song, K., & Fang, K. (2019) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2019.104527 · Cited by 86
Best practices for the management of end-of-life gypsum in a circular economy
Jiménez-Rivero, A., & Navarro, J. G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.05.068 · Cited by 85
Rose, C. M., Bergsagel, D., Dufresne, T., Unubreme, E., Lyu, T., Duffour, P., & Stegemann, J. A. (2018) · Sustainability · doi:10.3390/su10114118 · Cited by 84
A Review of Construction and Demolition Debris Regulations in the United States
Clark, C., Jambeck, J., & Townsend, T. (2006) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643380500531197 · Cited by 82
Carpenter, A., Lozano, R., Sammalisto, K., & Astner, L. (2018) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2018.01.065 · Cited by 82
Santos, A. C., Mendes, P., & Teixeira, M. R. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.042 · Cited by 82
Schiller, G., Gruhler, K., & Ortlepp, R. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12595 · Cited by 79
Reusability analytics tool for end-of-life assessment of building materials in a circular economy
Akanbi, L., Oyedele, L. O., Delgado, J. M. D., Bilal, M., Akinadé, O. O., Ajayi, A., & Mohammed-Yakub, N. (2018) · World Journal of Science Technology and Sustainable Development · doi:10.1108/wjstsd-05-2018-0041 · Cited by 79
Parrón-Rubio, M. E., Pérez-García, F., González-Herrera, A., Oliveira, M. J., & Cintas, M. D. R. (2019) · Materials · doi:10.3390/ma12182845 · Cited by 79
Mine Tailings Geopolymers as a Waste Management Solution for A More Sustainable Habitat
Paiva, H., Yliniemi, J., Illikainen, M., Rocha, F. T., & Ferreira, V. M. (2019) · Sustainability · doi:10.3390/su11040995 · Cited by 78
Noll, D., Wiedenhofer, D., Miatto, A., & Singh, S. J. (2019) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2019.104405 · Cited by 78
Limami, H., Manssouri, I., Cherkaoui, K., & Khaldoun, A. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100956 · Cited by 77
Wang, N., Guo, Z., Meng, F., Wang, H., Yin, J., & Liu, Y. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.064 · Cited by 76
Pilot scale cellulose recovery from sewage sludge and reuse in building and construction material
Palmieri, S., Cipolletta, G., Pastore, C., Giosué, C., Akyol, Ç., Eusebi, A. L., Frison, N., Tittarelli, F., & Fatone, F. (2019) · Waste Management · doi:10.1016/j.wasman.2019.09.015 · Cited by 76
Study on the application of waste bricks in emulsified oil-water separation
Li, Z., Wu, J., Yue, X., Qiu, F., Yang, D. Y., & Zhang, T. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119609 · Cited by 73
Saeli, M., Tobaldi, D. M., Seabra, M. P. D. S., & Labrincha, J. A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.10.213 · Cited by 71
From green buildings to green supply chains
Ghani, N. M. A. M. A., Eğilmez, G., Küçükvar, M., & Bhutta, M. K. S. (2017) · Management of Environmental Quality An International Journal · doi:10.1108/meq-12-2015-0211 · Cited by 68
Lozano-Miralles, J. A., Hermoso-Orzáez, M. J., García, C. M., & Rojas‐Sola, J. I. (2018) · Sustainability · doi:10.3390/su10082917 · Cited by 68
Usage of Interface Management System in Adaptive Reuse of Buildings
Eray, E., Sanchez, B., & Haas, C. T. (2019) · Buildings · doi:10.3390/buildings9050105 · Cited by 67
Osland, M. J., Griffith, K. T., Larriviere, J. C., Feher, L. C., Cahoon, D. R., Enwright, N. M., Oster, D. A., Tirpak, J. M., Woodrey, M. S., Collini, R. C., et al. (2017) · PLoS ONE · doi:10.1371/journal.pone.0183431 · Cited by 66
Construction and Demolition Waste in Romania: The Route from Illegal Dumping to Building Materials
Mihai, F. (2019) · Sustainability · doi:10.3390/su11113179 · Cited by 65
den Berghe, K. V., & Vos, M. (2019) · Sustainability · doi:10.3390/su11184875 · Cited by 63
Mass timber in the circular economy: paradigm in practice?
Campbell, A. (2019) · Proceedings of the Institution of Civil Engineers - Engineering Sustainability · doi:10.1680/jensu.17.00069 · Cited by 62
Ćwik, A., Casanova, I., Rausis, K., & Zarębska, K. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.03.020 · Cited by 62
Zhong, X., Qiu, J., Kang, J., Xing, X., Shi, X., & Wei, Y. (2019) · Environmental Pollution · doi:10.1016/j.envpol.2018.12.066 · Cited by 58
van der Leer, J., van Timmeren, A., & Wandl, A. (2018) · Architectural Science Review · doi:10.1080/00038628.2018.1505598 · Cited by 57
Sustainability through combined development of energy, water and environment systems
Mikulčić, H., Baleta, J., & Klemeš, J. J. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119727 · Cited by 57
Comparative life cycle assessment of manufactured and remanufactured loading machines in China
Xiao, L., Liu, W., Guo, Q., Gao, L., Zhang, G., & Chen, X. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2017.12.021 · Cited by 56
Environmental assessment of masonry mortars made with natural and recycled aggregates
Cuenca-Moyano, G. M., Martín-Morales, M., Bònoli, A., & Valverde-Palacios, I. (2018) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-018-1518-9 · Cited by 56
Cantero, B., del Bosque, I. F. S., Matías, A., de Rojas, M. I. S., & Medina, C. (2019) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2019.08.004 · Cited by 54
Liu, D., Li, H., Wang, W., & Dong, Y. (2011) · International Journal of Production Economics · doi:10.1016/j.ijpe.2011.04.008 · Cited by 51
Jiang, G. (2011) · Energy Procedia · doi:10.1016/j.egypro.2011.03.023 · Cited by 50
Lozano, A., da Silva, P. R., de Brito, J., Fernández, J. M., & Jiménez, J. R. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.002 · Cited by 50
Ternary Blended Binder for Production of a Novel Type of Lightweight Repair Mortar
Pavlíková, M., Zemanová, L., Záleská, M., Pokorný, J., Lojka, M., Jankovský, O., & Pavlík, Z. (2019) · Materials · doi:10.3390/ma12060996 · Cited by 50
REBUILD: Regenerative Buildings and Construction systems for a Circular Economy
Ajayebi, A., Chen, H.-M., Zhou, K., Hopkinson, P., Wang, Y., & Lam, D. (2019) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/225/1/012015 · Cited by 49
Hahladakis, J. Ν., Purnell, P., & Jabri, H. M. S. J. A. (2020) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x19897816 · Cited by 49
Moreno-Juez, J., Vegas, Í., Gebremariam, A. T., García-Cortés, V., & Maio, F. D. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121515 · Cited by 49
Usage of air jigging for multi-component separation of construction and demolition waste
Ambrós, W. M., Sampaio, C. H., Cazacliu, B. G., Miltzarek, G. L., & Miranda, L. R. (2016) · Waste Management · doi:10.1016/j.wasman.2016.11.029 · Cited by 48
Gupta, S., & Chaudhary, S. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121203 · Cited by 48
Lee, S., Quinn, A., & Rogers, C. D. F. (2016) · Sustainability · doi:10.3390/su8030220 · Cited by 44
Liu, X., Schraven, D. F. J., de Bruijne, M. L. C., de Jong, M., & Hertogh, M. J. C. M. (2019) · Sustainability · doi:10.3390/su11154197 · Cited by 44
Volk, R., Müller, R. C., Reinhardt, J., & Schultmann, F. (2019) · Ecological Economics · doi:10.1016/j.ecolecon.2019.03.020 · Cited by 43
A Preliminary Case Study on Circular Economy in Taiwan’s Construction
Chang, Y., & Hsieh, S. (2019) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/225/1/012069 · Cited by 42
Environmental comparison of indoor floor coverings
Ros-Dosdá, T., Celades, I., Vilalta, L., Fullana–i–Palmer, P., & Monfort, E. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.07.325 · Cited by 42
Giama, E., & Papadopoulos, A. M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120559 · Cited by 42
López-Uceda, A., Galvín, A. P., Ayuso, J., Jiménez, J. R., Vanwalleghem, T., & Peña, A. (2018) · Environmental Science and Pollution Research · doi:10.1007/s11356-018-1703-1 · Cited by 41
Towards a Framework of Literature Review Process in Support of Information Systems Research
Levy, Y. M., & Ellis, T. J. (2006) · Informing Science and IT Education Conference · doi:10.28945/2980 · Cited by 39
The environmental impacts of an innovative modular lightweight steel system: The Elissa case
Iuorio, O., Napolano, L., Fiorino, L., & Landolfo, R. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.117905 · Cited by 39
Boer, D. T., Segarra, M., Fernández, A. I., Vallès, M., Mateu, C., & Cabeza, L. F. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.12.103 · Cited by 36
Influence of Crushing Conditions on Recycled Concrete Aggregates (RCA) Leaching Behaviour
Coudray, C., Amant, V., Cantegrit, L., Bocq, A. L., Théry, F., Denot, A., & Eisenlohr, L. (2017) · Waste and Biomass Valorization · doi:10.1007/s12649-017-9868-2 · Cited by 35
Tallini, A., & Cedola, L. (2018) · Energy Procedia · doi:10.1016/j.egypro.2018.08.108 · Cited by 35
Archetypical CBMs in Construction and a Translation to Industrialized Manufacture
Heesbeen, C., & Prieto, A. (2020) · Sustainability · doi:10.3390/su12041572 · Cited by 35
Durability of self-compacting concrete made with recovery filler from hot-mix asphalt plants
Esquinas, Á. R., Álvarez, J. I., Jiménez, J. R., Fernández, J. M., & de Brito, J. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.142 · Cited by 34
Torrieri, F., Fumo, M., Sarnataro, M., & Ausiello, G. (2019) · Sustainability · doi:10.3390/su11195244 · Cited by 34
Circular economy and real estate: the legal (im)possibilities of operational lease
Ploeger, H. D., Prins, M., Straub, A., & den Brink, R. V. (2019) · Facilities · doi:10.1108/f-01-2018-0006 · Cited by 33
Hopff, B., Nijhuis, S., & Verhoef, L. A. (2019) · Sustainability · doi:10.3390/su11030627 · Cited by 31
Geldermans, B., Tenpierik, M., & Luscuere, P. G. (2019) · Buildings · doi:10.3390/buildings9090194 · Cited by 31
Aguerre, J. F. A., den Heijer, A. C., & Klein, T. (2017) · Repository hosted by TU Delft Library (TU Delft) · doi:10.7480/jfde.2018.1.1840 · Cited by 30
Lean Deconstruction Approach for Buildings Demolition Processes using BIM
Marzouk, M. M., Elmaraghy, A., & Voordijk, H. (2019) · University of Twente Research Information · Cited by 30
Orozco-Messana, J., de la Poza, E., & Calabuig-Moreno, R. (2020) · Sustainability · doi:10.3390/su12031143 · Cited by 29
Materials Metabolism Analysis of China's Highway Traffic System (HTS) for Promoting Circular Economy
Wen, Z., & Li, R. (2010) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2010.00263.x · Cited by 28
The Product as a Service Business Model: Performance over Ownership
Lacy, P., & Rutqvist, J. (2015) · Palgrave Macmillan UK eBooks · doi:10.1057/9781137530707_8 · Cited by 27
Heller, N., & Flamme, S. (2020) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x20904413 · Cited by 27
Promotion of circular economy: steelwork dusts as secondary raw material in conventional mortars
Lozano, A., Barbudo, A., Fernández, J. M., & Jiménez, J. R. (2019) · Environmental Science and Pollution Research · doi:10.1007/s11356-019-04948-y · Cited by 26
Modolo, R. C. E., Senff, L., Ferreira, V. M., Tarelho, L. A. C., & Moraes, C. A. M. (2017) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-017-0662-9 · Cited by 25
Quantification of anthropogenic metabolism using spatially differentiated continuous MFA
Schiller, G., Gruhler, K., & Regine, O. (2017) · Change and Adaptation in Socio-Ecological Systems · doi:10.1515/cass-2017-0011 · Cited by 23
del Bosque, I. F. S., Frías, M., de Rojas, M. I. S., & Medina, C. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.238 · Cited by 22
Enhanced On-Site Waste Management of Plasterboard in Construction Works: A Case Study in Spain
Jiménez-Rivero, A., Báez, A. D. G., & Navarro, J. G. (2017) · Sustainability · doi:10.3390/su9030450 · Cited by 21
Conversion of industrial wastes into marginal construction materials
Ikechukwu, A. F., & Awuzie, B. O. (2018) · Acta Structilia · doi:10.18820/24150487/as25i2.5 · Cited by 19
Bourke, K., & Kyle, B. (2019) · Canadian Journal of Civil Engineering · doi:10.1139/cjce-2018-0596 · Cited by 19
Briefing: BS 8001 and the built environment: a review and critique
Pomponi, F., & Moncaster, A. M. (2018) · Proceedings of the Institution of Civil Engineers - Engineering Sustainability · doi:10.1680/jensu.17.00067 · Cited by 18
Migliore, M., Carpinella, M., Paganin, G., Paolieri, F., & Talamo, C. M. L. (2018) · Environmental Engineering and Management Journal · doi:10.30638/eemj.2018.249 · Cited by 17
Cifrián, E., Coronado, M., Quijorna, N., Alonso-Santurde, R., & Andrés, A. (2019) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-019-00896-4 · Cited by 17
Analysis of Land use Changes and Environmental Loads during Urbanization in China
Zhang, H., Uwasu, M., Hara, K., Yabar, H., Yamaguchi, Y., & Murayama, T. (2008) · Journal of Asian Architecture and Building Engineering · doi:10.3130/jaabe.7.109 · Cited by 15
Štulović, M. D., Radovanović, D. Đ., Kamberović, Ž. J., Korać, M. S., & Anđić, Z. M. (2019) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph16112005 · Cited by 15
García-Díaz, A., García, C. M., & Cotes-Palomino, T. (2017) · Materials · doi:10.3390/ma10020100 · Cited by 14
Study of Possibilities of Using Special Types of Building and Demolition Waste in Civil Engineering
Drochytka, R., Dufek, Z., Michalčíková, M., & Hodul, J. (2020) · Periodica Polytechnica Civil Engineering · doi:10.3311/ppci.15128 · Cited by 14
Zabek, M., Hildebrand, L., Brell‐Çokcan, S., & Wirth, M. (2017) · doi:10.7480/jfde.2017.2.1684 · Cited by 13
Geldermans, B., Tenpierik, M., & Luscuere, P. G. (2019) · Sustainability · doi:10.3390/su11071984 · Cited by 13
Dynamic relationship between embodied and operational impacts of buildings
Ajayi, S. O., Oyedele, L. O., & Dauda, J. A. (2019) · World Journal of Science Technology and Sustainable Development · doi:10.1108/wjstsd-05-2018-0048 · Cited by 12
Recovery of waste expanded polystyrene in lightweight concrete production
Bedeković, G., Grčić, I., Vučinić, A. A., & Premur, V. (2019) · Rudarsko-geološko-naftni zbornik · doi:10.17794/rgn.2019.3.8 · Cited by 12
Cited by
Low-CO2 emission strategies to achieve net zero target in cement sector
Supriya, Chaudhury, R., Sharma, U., Thapliyal, P. C., & Singh, L. P. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.137466 · Cited by 576
Barbhuiya, S., Kanavaris, F., Das, B. B., & Idrees, M. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.108861 · Cited by 378
Guerra, B. C., Shahi, S., Mollaei, A., Skaf, N., Weber, O., Leite, F., & Haas, C. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.129125 · Cited by 196
Gasparri, E., Arasteh, S., Kuru, A., Stracchi, P., & Brambilla, A. (2023) · Frontiers in Built Environment · doi:10.3389/fbuil.2023.1239757 · Cited by 79
“DfD is indeed the key to enabling circular processes; therefore, the deconstruction strategies should be thoughtfully integrated from the early-design stages alongside manufacturing and assembly ones (Munaro and Tavares, 2021; Ahn et al., 2022; Eberhardt et al., 2022).”
InfluentialCircular Economy: A Review of Review Articles
Hossain, M., Park, S., Suchek, N., & Pansera, M. (2024) · Business Strategy and the Environment · doi:10.1002/bse.3867 · Cited by 77
Metadata
- Authors
- Çimen, Ö.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2021-07
- Volume
- 305
- Pages
- 127180
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3155811159
- Cited by
- 269
- References
- 204
- FWCI
- 16.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.