The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
3D scanning and 3D printing as innovative technologies for fabricating personalized topical drug delivery systems
Open accessAbstract
Acne is a multifactorial inflammatory skin disease with high prevalence. In this work, the potential of 3D printing to produce flexible personalised-shape anti-acne drug (salicylic acid) loaded devices was demonstrated by two different 3D printing (3DP) technologies: Fused Deposition Modelling (FDM) and stereolithography (SLA). 3D scanning technology was used to obtain a 3D model of a nose adapted to the morphology of an individual. In FDM 3DP, commercially produced Flex EcoPLA™ (FPLA) and polycaprolactone (PCL) filaments were loaded with salicylic acid by hot melt extrusion (HME) (theoretical drug loading - 2% w/w) and used as feedstock material for 3D printing. Drug loading in the FPLA-salicylic acid and PCL-salicylic acid 3D printed patches was 0.4% w/w and 1.2% w/w respectively, indicating significant thermal degradation of drug during HME and 3D printing. Diffusion testing in Franz cells using a synthetic membrane revealed that the drug loaded printed samples released <187μg/cm(2) within 3h. FPLA-salicylic acid filament was successfully printed as a nose-shape mask by FDM 3DP, but the PCL-salicylic acid filament was not. In the SLA printing process, the drug was dissolved in different mixtures of poly(ethylene glycol) diacrylate (PEGDA) and poly(ethylene glycol) (PEG) that were solidified by the action of a laser beam. SLA printing led to 3D printed devices (nose-shape) with higher resolution and higher drug loading (1.9% w/w) than FDM, with no drug degradation. The results of drug diffusion tests revealed that drug diffusion was faster than with the FDM devices, 229 and 291μg/cm(2) within 3h for the two formulations evaluated. In this study, SLA printing was the more appropriate 3D printing technology to manufacture anti-acne devices with salicylic acid. The combination of 3D scanning and 3D printing has the potential to offer solutions to produce personalised drug loaded devices, adapted in shape and size to individual patients.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Biomedical applications of biodegradable polymers
Ulery, B. D., Nair, L. S., & Laurencin, C. T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22259 · Cited by 2,206
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Medical Applications for 3D Printing: Current and Projected Uses.
Ventola, C. L. (2014) · PubMed Central · Cited by 920
A global perspective on the epidemiology of acne
Tan, J. K. L., & Bhate, K. (2015) · British Journal of Dermatology · doi:10.1111/bjd.13462 · Cited by 784
Stereolithographic (SLA) 3D printing of oral modified-release dosage forms
Wang, J., Goyanes, A., Gaisford, S., & Basit, A. W. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.03.016 · Cited by 612
Self-citation3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Goyanes, A., Buanz, A. B. M., Hatton, G. B., Gaisford, S., & Basit, A. W. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2014.12.003 · Cited by 570
Self-citationGoyanes, A., Wang, J., Buanz, A., Martínez-Pacheco, R., Telford, R., Gaisford, S., & Basit, A. W. (2015) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.5b00510 · Cited by 511
Self-citationChan, V., Zorlutuna, P., Jeong, J. H., Kong, H., & Bashir, R. (2010) · Lab on a Chip · doi:10.1039/c004285d · Cited by 468
Arcaute, K., Mann, B. K., & Wicker, R. B. (2006) · Annals of Biomedical Engineering · doi:10.1007/s10439-006-9156-y · Cited by 364
Cited by
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Recent progress in drug delivery
Li, C., Wang, J., Wang, Y., Gao, H., Wei, G., Huang, Y., Yu, H., Gan, Y., Wang, Y., Mei, L., et al. (2019) · Acta Pharmaceutica Sinica B · doi:10.1016/j.apsb.2019.08.003 · Cited by 818
Self-citation3D Printing in Pharmaceutical and Medical Applications – Recent Achievements and Challenges
Jamróz, W., Szafraniec, J., Kurek, M., & Jachowicz, R. (2018) · Pharmaceutical Research · doi:10.1007/s11095-018-2454-x · Cited by 707
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Selective laser sintering (SLS) 3D printing of medicines
Fina, F., Goyanes, A., Gaisford, S., & Basit, A. W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.06.082 · Cited by 577
Self-citationPharmaceutical amorphous solid dispersion: A review of manufacturing strategies
Bhujbal, S. V., Mitra, B., Jain, U., Gong, Y., Agrawal, A., Karki, S., Taylor, L. S., Kumar, S., & (Tony) Zhou, Q. (2021) · Acta Pharmaceutica Sinica B · doi:10.1016/j.apsb.2021.05.014 · Cited by 556
Polymeric composites for powder-based additive manufacturing: Materials and applications
Yuan, S., Shen, F., Chua, C. K., & Zhou, K. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.11.001 · Cited by 525
3D Printing Pharmaceuticals: Drug Development to Frontline Care
Trenfield, S. J., Awad, A., Goyanes, A., Gaisford, S., & Basit, A. W. (2018) · Trends in Pharmacological Sciences · doi:10.1016/j.tips.2018.02.006 · Cited by 502
Self-citationNovel Biomaterials Used in Medical 3D Printing Techniques
Tappa, K., & Jammalamadaka, U. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010017 · Cited by 490
Additive Manufacturing of Biomaterials, Tissues, and Organs
Zadpoor, A. A., & Malda, J. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1719-y · Cited by 462
3D Printing as a Promising Tool in Personalized Medicine
Vaz, V. M., & Kumar, L. (2021) · AAPS PharmSciTech · doi:10.1208/s12249-020-01905-8 · Cited by 409
Connected healthcare: Improving patient care using digital health technologies
Awad, A., Trenfield, S. J., Pollard, T. D., Ong, J. J., Elbadawi, M., McCoubrey, L. E., Goyanes, A., Gaisford, S., & Basit, A. W. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.113958 · Cited by 405
Self-citationVat photopolymerization 3D printing for advanced drug delivery and medical device applications
Xu, X., Awad, A., Robles-Martinez, P., Gaisford, S., Goyanes, A., & Basit, A. W. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.10.008 · Cited by 370
Self-citationFabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
The role of additive manufacturing for biomedical applications: A critical review
Kumar, R., Kumar, M., & Chohan, J. S. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.02.022 · Cited by 367
Azad, M. A., Olawuni, D., Kimbell, G., Badruddoza, A. Z. M., Hossain, M. S., & Sultana, T. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12020124 · Cited by 356
3D Printing of a Multi-Layered Polypill Containing Six Drugs Using a Novel Stereolithographic Method
Robles-Martinez, P., Xu, X., Trenfield, S. J., Awad, A., Goyanes, A., Telford, R., Basit, A. W., & Gaisford, S. (2019) · Pharmaceutics · doi:10.3390/pharmaceutics11060274 · Cited by 358
Self-citationGoyanes, A., Fina, F., Martorana, A., Sedough, D., Gaisford, S., & Basit, A. W. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.05.021 · Cited by 355
Self-citationLow temperature fused deposition modeling (FDM) 3D printing of thermolabile drugs
Kollamaram, G., Croker, D. M., Walker, G. M., Goyanes, A., Basit, A. W., & Gaisford, S. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.04.055 · Cited by 318
Self-citationPatient-specific 3D scanned and 3D printed antimicrobial polycaprolactone wound dressings
Muwaffak, Z., Goyanes, A., Clark, V., Basit, A. W., Hilton, S. T., & Gaisford, S. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.04.077 · Cited by 314
Self-citationPersonalised 3D Printed Medicines: Which Techniques and Polymers Are More Successful?
Konta, A., García-Piña, M., & Serrano, D. (2017) · Bioengineering · doi:10.3390/bioengineering4040079 · Cited by 301
Shaping the future: recent advances of 3D printing in drug delivery and healthcare
Trenfield, S. J., Awad, A., Madla, C. M., Hatton, G. B., Firth, J., Goyanes, A., Gaisford, S., & Basit, A. W. (2019) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2019.1660318 · Cited by 299
Self-citation4D‐Printed Biodegradable and Remotely Controllable Shape Memory Occlusion Devices
Lin, C., Lv, J., Li, Y., Zhang, F., Li, J., Liu, Y., Liu, L., & Leng, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201906569 · Cited by 272
3D printed multi-compartment capsular devices for two-pulse oral drug delivery
Maroni, A., Melocchi, A., Parietti, F., Foppoli, A., Zema, L., & Gazzaniga, A. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.10.008 · Cited by 268
3D printing of drug-loaded gyroid lattices using selective laser sintering
Fina, F., Goyanes, A., Madla, C. M., Awad, A., Trenfield, S. J., Kuek, J. M., Patel, P., Gaisford, S., & Basit, A. W. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.05.044 · Cited by 265
Self-citation3D printed medicines: A new branch of digital healthcare
Awad, A., Trenfield, S. J., Gaisford, S., & Basit, A. W. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.07.024 · Cited by 265
Self-citationTranslating 3D printed pharmaceuticals: From hype to real-world clinical applications
Seoane-Viaño, I., Trenfield, S. J., Basit, A. W., & Goyanes, A. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.05.003 · Cited by 265
Self-citationReshaping drug development using 3D printing
Awad, A., Trenfield, S. J., Goyanes, A., Gaisford, S., & Basit, A. W. (2018) · Drug Discovery Today · doi:10.1016/j.drudis.2018.05.025 · Cited by 263
Self-citationPolymeric drug delivery systems by additive manufacturing
Borandeh, S., van Bochove, B., Teotia, A., & Seppälä, J. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.03.022 · Cited by 254
Stereolithography 3D printing technology in pharmaceuticals: a review
Deshmane, S., Kendre, P., Mahajan, H., & Jain, S. (2021) · Drug Development and Industrial Pharmacy · doi:10.1080/03639045.2021.1994990 · Cited by 103
Metadata
- Authors
- Goyanes, A., Det-Amornrat, U., Wang, J., Basit, A. W., & Gaisford, S.
- Venue
- Journal of Controlled Release
- Publisher
- Elsevier BV
- Published
- 2016-07
- Volume
- 234
- Pages
- 41-48
- ISSN
- 0168-3659 (ISSN-L)
- OpenAlex
- W2350168938
- Cited by
- 490
- References
- 22
- FWCI
- 31.05
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.