The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Recent advances in production and upgrading of bio-oil from biomass: A critical overview
Abstract
Abstract Pyrolysis and liquefaction are widely accepted methods used for the synthesis of bio-oil using biomass. The quality and quantity of the bio-oil, produced either from pyrolysis or liquefaction, depend on various parameters including reaction temperature, reaction time, type of solvent and its ratio to biomass, lignocellulosic composition of feedstock and catalyst. Comparatively, hydrothermal liquefaction (HTL) is considered as more economic and environmental friendly process than pyrolysis. For instance, pyrolysis emits volatile matter and requires a dry feedstock while HTL can handle both dry and wet biomass, hence, saving costs, energy and time required for drying the biomass. The bio-oil cannot be used directly for transportation and ignition purposes. Therefore, it needs an upgrading process to improve its physico-chemical properties. There are various methods for upgrading of bio-oil such as hydro-treatment, catalytic cracking, supercritical fluid (SCFs), esterification and emulsification. This review describes the HTL process for biomass and its important parameters in detail, and various techniques employed for upgrading of bio-oil. The review also summarizes the effect of biomass feedstock source and composition on the process and products.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrolysis of lignocellulosic materials for ethanol production: a review
Sun, Y., & Cheng, J. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(01)00212-7 · Cited by 6,070
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
An overview of the chemical composition of biomass
Vassilev, S. V., Baxter, D., Andersen, L. K., & Vassileva, C. G. (2010) · Fuel · doi:10.1016/j.fuel.2009.10.022 · Cited by 2,519
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
Effect of process parameters on production of biochar from biomass waste through pyrolysis: A review
Tripathi, M., Sahu, J. N., & Ganesan, P. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.122 · Cited by 1,759
The Art, Science, and Technology of Charcoal Production
Antal, M. J., & Grønli, M. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0207919 · Cited by 1,623
Biofuels Production through Biomass Pyrolysis—A Technological Review
Jahirul, M., Rasul, M., Chowdhury, A., & Ashwath, N. (2012) · Energies · doi:10.3390/en5124952 · Cited by 1,427
Effects of temperature and particle size on bio-char yield from pyrolysis of agricultural residues
Demirbas, A. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.07.003 · Cited by 1,154
Production of solid biochar fuel from waste biomass by hydrothermal carbonization
Liu, Z., Quek, A., Kent Hoekman, S., & Balasubramanian, R. (2013) · Fuel · doi:10.1016/j.fuel.2012.07.069 · Cited by 808
López Barreiro, D., Prins, W., Ronsse, F., & Brilman, W. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.12.029 · Cited by 695
Hydrothermal processing of microalgae using alkali and organic acids
Ross, A. B., Biller, P., Kubacki, M. L., Li, H., Lea-Langton, A., & Jones, J. M. (2010) · Fuel · doi:10.1016/j.fuel.2010.01.025 · Cited by 617
Hydrothermal liquefaction of a microalga with heterogeneous catalysts
Duan, P., & Savage, P. E. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie100758s · Cited by 608
Hydrothermal Liquefaction of Macroalgae Enteromorpha prolifera to Bio-oil
Zhou, D., Zhang, L., Zhang, S., Fu, H., & Chen, J. (2010) · Energy & Fuels · doi:10.1021/ef100151h · Cited by 531
Garcia Alba, L., Torri, C., Samorì, C., van der Spek, J., Fabbri, D., Kersten, S. R. A., & Brilman, D. W. F. (. (2012) · Energy & Fuels · doi:10.1021/ef201415s · Cited by 477
Hydrothermal liquefaction for algal biorefinery: A critical review
Tian, C., Li, B., Liu, Z., Zhang, Y., & Lu, H. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.030 · Cited by 389
Cellulose decomposition in hot-compressed water with alkali or nickel catalyst
Minowa, T., Zhen, F., & Ogi, T. (1998) · The Journal of Supercritical Fluids · doi:10.1016/s0896-8446(98)00059-x · Cited by 387
Effects of various solvents on the liquefaction of biomass to produce fuels and chemical feedstocks
Liu, Z., & Zhang, F.-S. (2008) · Energy Conversion and Management · doi:10.1016/j.enconman.2008.08.009 · Cited by 384
Sınaǧ, A., Kruse, A., & Rathert, J. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030475+ · Cited by 327
Huang, H.-J., Yuan, X.-Z., Zhu, H.-N., Li, H., Liu, Y., Wang, X.-L., & Zeng, G.-M. (2013) · Energy · doi:10.1016/j.energy.2013.04.065 · Cited by 214
Hydrothermal Liquefaction of Low Lipid Content Microalgae into Bio-Crude Oil
Yu, G., Zhang, Y., Schideman, L., Funk, T. L., & Wang, Z. (2011) · Transactions of the ASABE · doi:10.13031/2013.36241 · Cited by 174
Leng, L., Li, J., Yuan, X., Li, J., Han, P., Hong, Y., Wei, F., & Zhou, W. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2017.12.018 · Cited by 139
Doassans-Carrère, N., Ferrasse, J.-H., Boutin, O., Mauviel, G., & Lédé, J. (2014) · Energy & Fuels · doi:10.1021/ef500641c · Cited by 49
Cited by
A Review of Recent Advances in Biomass Pyrolysis
Wang, G., Dai, Y., Yang, H., Xiong, Q., Wang, K., Zhou, J., Li, Y., & Wang, S. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03107 · Cited by 597
Kumar, R., Strezov, V., Weldekidan, H., He, J., Singh, S., Kan, T., & Dastjerdi, B. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109763 · Cited by 542
Lee, X. J., Ong, H. C., Gan, Y. Y., Chen, W.-H., & Mahlia, T. M. I. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112707 · Cited by 465
Next-generation biofuels and platform biochemicals from lignocellulosic biomass
Okolie, J. A., Mukherjee, A., Nanda, S., Dalai, A. K., & Kozinski, J. A. (2021) · International Journal of Energy Research · doi:10.1002/er.6697 · Cited by 184
Advances in Biomass Co-Combustion with Fossil Fuels in the European Context: A Review
Variny, M., Varga, A., Rimár, M., Janošovský, J., Kizek, J., Lukáč, L., Jablonský, G., & Mierka, O. (2021) · Processes · doi:10.3390/pr9010100 · Cited by 98
Metadata
- Authors
- Baloch, H. A., Nizamuddin, S., Siddiqui, M. T. H., Riaz, S., Jatoi, A. S., Dumbre, D. K., Mubarak, N. M., Srinivasan, M. P., & Griffin, G. J.
- Venue
- Journal of Environmental Chemical Engineering
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 6
- Issue
- 4
- Pages
- 5101-5118
- ISSN
- 2213-2929 (ISSN-L)
- 2213-3437
- OpenAlex
- W2885823201
- Cited by
- 248
- References
- 23
- FWCI
- 10.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.