The DOI matches its Crossref record; 196 of the 196 references it cites were found in a registry or an index.
Recent advances in nanocellulose-based different biomaterials: types, properties, and emerging applications
Open accessAbstract
The research interest in sustainable and eco-friendly materials based on natural sources has increased dramatically due to their recyclability, biodegradability, compatibility, and nontoxic behavior. Nanocellulose contains chains of glucose residue and is an abundantly available green material. Recently, nanocellulose-based green composites are under extensive exploration and gained popularity among researchers owing to their lightweight, lost cost, low density, excellent mechanical and physical characteristics. These materials have also shown tremendous potential for applications in biomedical and numerous engineering fields. The mechanical properties of these materials play a vital role in effective utilization and their exploration for future applications. This review article comprehensively presents current developments, results, and findings in the arena of green and sustainable materials. Currently, the main problem is the large variability in their properties and qualities. Nanocellulose properties are influenced by various factors, including the fiber type, ecological conditions, manufacturing methods, and any alteration of the fiber surface. Finally, the review incorporates future challenges and opportunities in the field of nano cellulosic materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
Silane coupling agents used for natural fiber/polymer composites: A review
Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H., & Mai, C. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.03.005 · Cited by 2,244
The rise of plastic bioelectronics
Someya, T., Bao, Z., & Malliaras, G. G. (2016) · Nature · doi:10.1038/nature21004 · Cited by 1,884
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
Kabir, M. M., Wang, H., Lau, K. T., & Cardona, F. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.053 · Cited by 1,851
Nanocellulose, a Versatile Green Platform: From Biosources to Materials and Their Applications
Thomas, B., Raj, M. C., B, A. K., H, R. M., Joy, J., Moores, A., Drisko, G. L., & Sanchez, C. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00627 · Cited by 1,714
Production of cellulose nanofibrils: A review of recent advances
Nechyporchuk, O., Belgacem, M. N., & Bras, J. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.016 · Cited by 1,687
Nanocellulose in biomedicine: Current status and future prospect
Lin, N., & Dufresne, A. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.07.025 · Cited by 1,658
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,657
Green composites from sustainable cellulose nanofibrils: A review
Abdul Khalil, H. P. S., Bhat, A. H., & Ireana Yusra, A. F. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.078 · Cited by 1,573
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Challenges and Opportunities for Solar Evaporation
Chen, C., Kuang, Y., & Hu, L. (2019) · Joule · doi:10.1016/j.joule.2018.12.023 · Cited by 1,518
Abdul Khalil, H. P. S., Davoudpour, Y., Islam, M. N., Mustapha, A., Sudesh, K., Dungani, R., & Jawaid, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.08.069 · Cited by 1,333
Nanocellulose: From Fundamentals to Advanced Applications
Trache, D., Tarchoun, A. F., Derradji, M., Hamidon, T. S., Masruchin, N., Brosse, N., & Hussin, M. H. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00392 · Cited by 1,309
Nanocellulose, a tiny fiber with huge applications
Abitbol, T., Rivkin, A., Cao, Y., Nevo, Y., Abraham, E., Ben-Shalom, T., Lapidot, S., & Shoseyov, O. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.01.002 · Cited by 1,006
A High‐Performance Self‐Regenerating Solar Evaporator for Continuous Water Desalination
Kuang, Y., Chen, C., He, S., Hitz, E. M., Wang, Y., Gan, W., Mi, R., & Hu, L. (2019) · Advanced Materials · doi:10.1002/adma.201900498 · Cited by 1,005
Klemm, D., Cranston, E. D., Fischer, D., Gama, M., Kedzior, S. A., Kralisch, D., Kramer, F., Kondo, T., Lindström, T., Nietzsche, S., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2018.02.001 · Cited by 936
Cellulose-Based Bio- and Nanocomposites: A Review
Kalia, S., Dufresne, A., Cherian, B. M., Kaith, B. S., Avérous, L., Njuguna, J., & Nassiopoulos, E. (2011) · International Journal of Polymer Science · doi:10.1155/2011/837875 · Cited by 896
Extraction and characterization of lignin from different biomass resources
Watkins, D., Nuruddin, M., Hosur, M., Tcherbi-Narteh, A., & Jeelani, S. (2015) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2014.10.009 · Cited by 821
A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801
AL-Oqla, F. M., & Sapuan, S. M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.10.050 · Cited by 782
Karimah, A., Ridho, M. R., Munawar, S. S., Adi, D. S., Ismadi, Damayanti, R., Subiyanto, B., Fatriasari, W., & Fudholi, A. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.06.014 · Cited by 771
Nasrollahzadeh, M., Sajjadi, M., Iravani, S., & Varma, R. S. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116986 · Cited by 718
Plant-based natural fibre reinforced cement composites: A review
Onuaguluchi, O., & Banthia, N. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.02.014 · Cited by 698
Nanofibrillated Cellulose Surface Modification: A Review
Missoum, K., Belgacem, M., & Bras, J. (2013) · Materials · doi:10.3390/ma6051745 · Cited by 658
Shalwan, A., & Yousif, B. F. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.07.014 · Cited by 607
Natural fiber reinforced composites: Sustainable materials for emerging applications
Khalid, M. Y., Al Rashid, A., Arif, Z. U., Ahmed, W., Arshad, H., & Zaidi, A. A. (2021) · Results in Engineering · doi:10.1016/j.rineng.2021.100263 · Cited by 600
Self-citationPreparation of cellulose-based hydrogel: a review
Zainal, S. H., Mohd, N. H., Suhaili, N., Anuar, F. H., Lazim, A. M., & Othaman, R. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.12.012 · Cited by 573
Rojo, E., Peresin, M. S., Sampson, W. W., Hoeger, I. C., Vartiainen, J., Laine, J., & Rojas, O. J. (2015) · Green Chemistry · doi:10.1039/c4gc02398f · Cited by 530
Natural fiber reinforced polylactic acid composites: A review
Siakeng, R., Jawaid, M., Ariffin, H., Sapuan, S. M., Asim, M., & Saba, N. (2019) · Polymer Composites · doi:10.1002/pc.24747 · Cited by 524
Natural fiber–reinforced composites: A review on material, manufacturing, and machinability
Lotfi, A., Li, H., Dao, D. V., & Prusty, G. (2021) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705719844546 · Cited by 499
Nanocellulose-Based Materials for Water Purification
Voisin, H., Bergström, L., Liu, P., & Mathew, A. (2017) · Nanomaterials · doi:10.3390/nano7030057 · Cited by 460
Use of nanocellulose in printed electronics: a review
Hoeng, F., Denneulin, A., & Bras, J. (2016) · Nanoscale · doi:10.1039/c6nr03054h · Cited by 459
Osong, S. H., Norgren, S., & Engstrand, P. (2016) · Cellulose · doi:10.1007/s10570-015-0798-5 · Cited by 434
Amphiphilic superabsorbent cellulose nanofibril aerogels
Jiang, F., & Hsieh, Y.-L. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00743c · Cited by 429
Nanocellulose: Recent Fundamental Advances and Emerging Biological and Biomimicking Applications
Heise, K., Kontturi, E., Allahverdiyeva, Y., Tammelin, T., Linder, M. B., Nonappa, & Ikkala, O. (2021) · Advanced Materials · doi:10.1002/adma.202004349 · Cited by 425
Deepa, B., Abraham, E., Cordeiro, N., Mozetic, M., Mathew, A. P., Oksman, K., Faria, M., Thomas, S., & Pothan, L. A. (2015) · Cellulose · doi:10.1007/s10570-015-0554-x · Cited by 420
Nanocellulose in packaging: Advances in barrier layer technologies
Ferrer, A., Pal, L., & Hubbe, M. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.11.012 · Cited by 382
Materials chemistry and the futurist eco-friendly applications of nanocellulose: Status and prospect
Mishra, R. K., Sabu, A., & Tiwari, S. K. (2018) · Journal of Saudi Chemical Society · doi:10.1016/j.jscs.2018.02.005 · Cited by 382
Flexible Electronics Based on Micro/Nanostructured Paper
Zhang, Y., Zhang, L., Cui, K., Ge, S., Cheng, X., Yan, M., Yu, J., & Liu, H. (2018) · Advanced Materials · doi:10.1002/adma.201801588 · Cited by 380
High performance green barriers based on nanocellulose
Nair, S. S., Zhu, J., Deng, Y., & Ragauskas, A. J. (2014) · Sustainable Chemical Processes · doi:10.1186/s40508-014-0023-0 · Cited by 368
Ultra porous nanocellulose aerogels as separation medium for mixtures of oil/water liquids
Cervin, N. T., Aulin, C., Larsson, P. T., & Wågberg, L. (2012) · Cellulose · doi:10.1007/s10570-011-9629-5 · Cited by 363
Cellulose nanofibers produced from banana peel by chemical and enzymatic treatment
Tibolla, H., Pelissari, F. M., & Menegalli, F. C. (2014) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2014.04.011 · Cited by 358
Kumar, R., Ul Haq, M. I., Raina, A., & Anand, A. (2019) · International Journal of Sustainable Engineering · doi:10.1080/19397038.2018.1538267 · Cited by 354
Okahisa, Y., Yoshida, A., Miyaguchi, S., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.04.017 · Cited by 346
Environmental friendly method for the extraction of coir fibre and isolation of nanofibre
Abraham, E., Deepa, B., Pothen, L. A., Cintil, J., Thomas, S., John, M. J., Anandjiwala, R., & Narine, S. S. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.10.056 · Cited by 328
Zhou, C., Shi, Q., Guo, W., Terrell, L., Qureshi, A. T., Hayes, D. J., & Wu, Q. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4005072 · Cited by 327
Biodegradable transparent substrates for flexible organic-light-emitting diodes
Zhu, H., Xiao, Z., Liu, D., Li, Y., Weadock, N. J., Fang, Z., Huang, J., & Hu, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40492g · Cited by 323
Arrakhiz, F. Z., El Achaby, M., Malha, M., Bensalah, M. O., Fassi-Fehri, O., Bouhfid, R., Benmoussa, K., & Qaiss, A. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.06.056 · Cited by 315
Thermal and dynamic mechanical properties of cellulose nanofibers reinforced epoxy composites
Saba, N., Safwan, A., Sanyang, M. L., Mohammad, F., Pervaiz, M. A., Jawaid, M., Alothman, O. Y., & Sain, M. M. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.04.074 · Cited by 305
Comprehensive review on nanocellulose: Recent developments, challenges and future prospects
Thomas, P., Duolikun, T., Rumjit, N. P., Moosavi, S., Lai, C. W., Bin Johan, M. R., & Fen, L. B. (2020) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2020.103884 · Cited by 304
Oun, A. A., & Rhim, J.-W. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.03.073 · Cited by 294
Yu, H.-Y., Zhang, D.-Z., Lu, F.-F., & Yao, J. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00126 · Cited by 294
Thomas, M. G., Abraham, E., Jyotishkumar, P., Maria, H. J., Pothen, L. A., & Thomas, S. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.08.053 · Cited by 291
Abol-Fotouh, D., Hassan, M. A., Shokry, H., Roig, A., Azab, M. S., & Kashyout, A. E.-H. B. (2020) · Scientific Reports · doi:10.1038/s41598-020-60315-9 · Cited by 272
Superhydrophobic Coatings on Cellulose‐Based Materials: Fabrication, Properties, and Applications
Teisala, H., Tuominen, M., & Kuusipalo, J. (2014) · Advanced Materials Interfaces · doi:10.1002/admi.201300026 · Cited by 270
Silva, G., Kim, S., Aguilar, R., & Nakamatsu, J. (2019) · Sustainable materials and technologies · doi:10.1016/j.susmat.2019.e00132 · Cited by 270
A review of the developments of characteristics of PEI derivatives for gene delivery applications
Taranejoo, S., Liu, J., Verma, P., & Hourigan, K. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42096 · Cited by 246
Potential Natural Fiber Polymeric Nanobiocomposites: A Review
Hasan, K. M. F., Horváth, P. G., & Alpár, T. (2020) · Polymers · doi:10.3390/polym12051072 · Cited by 244
Ummartyotin, S., Juntaro, J., Sain, M. M., & Manuspiya, H. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2011.06.025 · Cited by 239
Mahardika, M., Abral, H., Kasim, A., Arief, S., & Asrofi, M. (2018) · Fibers · doi:10.3390/fib6020028 · Cited by 234
Bacterial nanocellulose: Present status, biomedical applications and future perspectives
Sharma, C., & Bhardwaj, N. K. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.109963 · Cited by 232
A review on synthesis and characterization of commercially available natural fibers: Part-I
Puttegowda, M., Rangappa, S. M., Senthamaraikannan, P., Pradeep, S., Saravanakumar, S. S., & Yogesha, B. (2018) · Journal of Natural Fibers · doi:10.1080/15440478.2018.1453433 · Cited by 232
Fortunati, E., Peltzer, M., Armentano, I., Jiménez, A., & Kenny, J. M. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.03.025 · Cited by 225
Tang, H., Butchosa, N., & Zhou, Q. (2015) · Advanced Materials · doi:10.1002/adma.201404565 · Cited by 225
Maslinda, A. B., Abdul Majid, M. S., Ridzuan, M. J. M., Afendi, M., & Gibson, A. G. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.02.023 · Cited by 225
A review on synthesis and characterization of commercially available natural fibers: Part II
Puttegowda, M., Rangappa, S. M., Senthamaraikannan, P., Pradeep, S., Saravanakumar, S. S., & Yogesha, B. (2017) · Journal of Natural Fibers · doi:10.1080/15440478.2017.1379045 · Cited by 220
Nimeskern, L., Martínez Ávila, H., Sundberg, J., Gatenholm, P., Müller, R., & Stok, K. S. (2013) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2013.03.005 · Cited by 219
Rambabu, N., Panthapulakkal, S., Sain, M., & Dalai, A. K. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.11.083 · Cited by 218
Karim, Z., Claudpierre, S., Grahn, M., Oksman, K., & Mathew, A. P. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.05.018 · Cited by 214
Martelli-Tosi, M., Masson, M. M., Silva, N. C., Esposto, B. S., Barros, T. T., Assis, O. B. G., & Tapia-Blácido, D. R. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.06.053 · Cited by 212
Thermorheological and mechanical properties of cellulose reinforced PLA bio-composites
Awal, A., Rana, M., & Sain, M. (2015) · Mechanics of Materials · doi:10.1016/j.mechmat.2014.09.009 · Cited by 211
A Size‐Exclusion Nanocellulose Filter Paper for Virus Removal
Metreveli, G., Wågberg, L., Emmoth, E., Belák, S., Strømme, M., & Mihranyan, A. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201300641 · Cited by 209
Li, Y., Chen, H., Liu, D., Wang, W., Liu, Y., & Zhou, S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02940 · Cited by 206
Cazón, P., Vázquez, M., & Velázquez, G. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.04.120 · Cited by 206
Zhou, L., Ke, K., Yang, M.-B., & Yang, W. (2021) · Composites Communications · doi:10.1016/j.coco.2020.100548 · Cited by 205
Müller, A., Ni, Z., Hessler, N., Wesarg, F., Müller, F. A., Kralisch, D., & Fischer, D. (2013) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.23385 · Cited by 201
E-Glass Fiber Reinforced Composites in Dental Applications
Zhang, M., & Matinlinna, J. P. (2012) · Silicon · doi:10.1007/s12633-011-9075-x · Cited by 199
Babaee, M., Jonoobi, M., Hamzeh, Y., & Ashori, A. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.06.043 · Cited by 197
Spinella, S., Lo Re, G., Liu, B., Dorgan, J., Habibi, Y., Leclère, P., Raquez, J.-M., Dubois, P., & Gross, R. A. (2015) · Polymer · doi:10.1016/j.polymer.2015.02.048 · Cited by 197
Gupta, A., Simmons, W., Schueneman, G. T., Hylton, D., & Mintz, E. A. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02458 · Cited by 197
Khalid, M. Y., Imran, R., Arif, Z. U., Akram, N., Arshad, H., Rashid, A. A., & Márquez, F. P. G. (2021) · Coatings · doi:10.3390/coatings11030293 · Cited by 197
Self-citationWu, Y., Xia, C., Cai, L., Garcia, A. C., & Shi, S. Q. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.257 · Cited by 196
Polypropylene composites with natural fibers and wood – General mechanical property profiles
Sobczak, L., Lang, R. W., & Haider, A. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.12.013 · Cited by 193
The reuse of wastepaper for the extraction of cellulose nanocrystals
Danial, W. H., Abdul Majid, Z., Mohd Muhid, M. N., Triwahyono, S., Bakar, M. B., & Ramli, Z. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.10.072 · Cited by 189
Optimization of physical and mechanical properties for chitosan–nanocellulose biocomposites
Dehnad, D., Emam-Djomeh, Z., Mirzaei, H., Jafari, S.-M., & Dadashi, S. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.01.094 · Cited by 188
Thermoresponsive Nanocellulose Hydrogels with Tunable Mechanical Properties
McKee, J. R., Hietala, S., Seitsonen, J., Laine, J., Kontturi, E., & Ikkala, O. (2014) · ACS Macro Letters · doi:10.1021/mz400596g · Cited by 181
Biomimetics and technical textiles: solving engineering problems with the help of nature's wisdom
Milwich, M., Speck, T., Speck, O., Stegmaier, T., & Planck, H. (2006) · American Journal of Botany · doi:10.3732/ajb.93.10.1455 · Cited by 176
Herrera, N., Salaberria, A. M., Mathew, A. P., & Oksman, K. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.05.024 · Cited by 175
Nanocellulose-based films and their emerging applications
Fang, Z., Hou, G., Chen, C., & Hu, L. (2019) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2019.07.003 · Cited by 172
A critical review of cellulose-based nanomaterials for water purification in industrial processes
Wang, D. (2019) · Cellulose · doi:10.1007/s10570-018-2143-2 · Cited by 169
Silva, N. H. C. S., Rodrigues, A. F., Almeida, I. F., Costa, P. C., Rosado, C., Neto, C. P., Silvestre, A. J. D., & Freire, C. S. R. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.02.014 · Cited by 168
Characterization of alkali treated new cellulosic fibre from Cyrtostachys renda
Loganathan, T. M., Sultan, M. T. H., Ahsan, Q., Jawaid, M., Naveen, J., Shah, A. U. M., & Hua, L. S. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.01.091 · Cited by 161
Comparative Study of Dielectric Properties of Hybrid Natural Fiber Composites
Jayamani, E., Hamdan, S., Rahman, M. R., & Bakri, M. K. B. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.12.280 · Cited by 160
3D Bioprinted Nanocellulose-Based Hydrogels for Tissue Engineering Applications: A Brief Review
Athukoralalage, S. S. A., Balu, R., Dutta, N. K., & Choudhury, N. R. (2019) · Polymers · doi:10.3390/polym11050898 · Cited by 160
Liu, Y., Xie, J., Wu, N., Wang, L., Ma, Y., & Tong, J. (2019) · Tribology International · doi:10.1016/j.triboint.2018.11.004 · Cited by 158
Ramlee, N. A., Jawaid, M., Zainudin, E. S., & Yamani, S. A. K. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.06.016 · Cited by 158
Preparation and characterization of transparent PMMA–cellulose-based nanocomposites
Kiziltas, E. E., Kızıltaş, A., Bollin, S. C., & Gardner, D. J. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.03.029 · Cited by 156
Biosensors Based on Porous Cellulose Nanocrystal–Poly(vinyl Alcohol) Scaffolds
Schyrr, B., Pasche, S., Voirin, G., Weder, C., Simon, Y. C., & Foster, E. J. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502670u · Cited by 154
Enhancing the mechanical properties of 3D printed polylactic acid using nanocellulose
Ambone, T. S., T., A. T. A., & Shanmuganathan, K. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25421 · Cited by 149
Novel Carbon Nanotube/Cellulose Composite Fibers As Multifunctional Materials
Qi, H., Schulz, B., Vad, T., Liu, J., Mäder, E., Seide, G. H., & Gries, T. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06229 · Cited by 148
Chen, Y., Pötschke, P., Pionteck, J., Voit, B. I., & Qi, H. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta00618k · Cited by 148
Hassan, M. M., Tucker, N., & Guen, M.-J. L. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115675 · Cited by 146
Vijay, R., Vinod, A., Singaravelu, D. L., Rangappa, S. M., & Siengchin, S. (2020) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2020.06.008 · Cited by 146
da Silva, R. R., Raymundo‐Pereira, P. A., de Campos, A. M., Wilson, D., Otoni, C. G., Barud, H. D. S., Costa, C. A. R., Domeneguetti, R. R., Balogh, D. T., Ribeiro, S. J. L., et al. (2020) · Talanta · doi:10.1016/j.talanta.2020.121153 · Cited by 145
Syafiq, R. M. O., Sapuan, S. M., & Zuhri, M. R. M. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.12.091 · Cited by 140
Nanocellulose/Gelatin Composite Cryogels for Controlled Drug Release
Li, J., Wang, Y., Zhang, L., Xu, Z., Dai, H., & Wu, W. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b00161 · Cited by 136
Huang, C., Guo, H., Xiong, L., Wang, B., Shi, S., Chen, X., Lin, X.-Q., Wang, C., Luo, J., & Chen, X.-D. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.09.043 · Cited by 136
Zulkifli, N. I., Samat, N., Anuar, H., & Zainuddin, N. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.12.053 · Cited by 136
Jiji, S., Udhayakumar, S., Rose, C., Muralidharan, C., & Kadirvelu, K. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.10.192 · Cited by 136
Mechanical Properties of Composite Hydrogels of Alginate and Cellulose Nanofibrils
Aarstad, O. A., Heggset, E. B., Pedersen, I. S., Bjørnøy, S. H., Syverud, K., & Strand, B. L. (2017) · Polymers · doi:10.3390/polym9080378 · Cited by 134
A mechanochemical approach to manufacturing bamboo cellulose nanocrystals
Lu, Q., Lin, W., Tang, L., Wang, S., Chen, X., & Huang, B. (2014) · Journal of Materials Science · doi:10.1007/s10853-014-8620-6 · Cited by 133
Extraction and characterization of nanocellulose from three types of palm residues
Mehanny, S., Magd, E. E. A.-E., Ibrahim, M. M., Farag, M. M., Gil-San-Millán, R., Navarro, J. A. R., Habbak, A. E. H. E., & El-Kashif, E. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.12.027 · Cited by 132
Metal Cation Cross-Linked Nanocellulose Hydrogels as Tissue Engineering Substrates
Zander, N. E., Dong, H., Steele, J., & Grant, J. T. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506007z · Cited by 130
Effect of silane treatment loading on the flexural properties of PLA/flax unidirectional composites
Georgiopoulos, P., Kontou, E., & Georgousis, G. (2018) · Composites Communications · doi:10.1016/j.coco.2018.05.002 · Cited by 130
Treatments of natural fiber as reinforcement in polymer composites—a short review
Norizan, M. N., Harussani, M. M., Aisyah, H. A., Ilyas, R. A., Norrrahim, M. N. F., Khalina, A., & Abdullah, N. (2021) · Functional Composites and Structures · doi:10.1088/2631-6331/abff36 · Cited by 129
Khalid, M. Y., Rashid, A. A., Arif, Z. U., Sheikh, M. F., Arshad, H., & Nasir, M. A. (2021) · Results in Engineering · doi:10.1016/j.rineng.2021.100232 · Cited by 129
Self-citationDevelopment of nanocellulose-reinforced PLA nanocomposite by using maleated PLA (PLA-g-MA)
Ghasemi, S., Behrooz, R., Ghasemi, I., Yassar, R. S., & Long, F. (2017) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705717734600 · Cited by 128
Recent studies on modified cellulose/nanocellulose epoxy composites: A systematic review
Neves, R. M., Ornaghi, H. L., Zattera, A. J., & Amico, S. C. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117366 · Cited by 128
Surface modification of kapok fibers by cold plasma surface treatment
Macedo, M. J. P., Silva, G. S., Feitor, M. C., Costa, T. H. C., Ito, E. N., & Melo, J. D. D. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.12.077 · Cited by 124
Tanpichai, S., Witayakran, S., Srimarut, Y., Woraprayote, W., & Malila, Y. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.05.024 · Cited by 123
Padzil, F. N. M., Lee, S. H., Ainun, Z. M. A., Lee, C. H., & Abdullah, L. C. (2020) · Materials · doi:10.3390/ma13051245 · Cited by 122
Comparative evaluation of fiber treatments on the creep behavior of jute/green epoxy composites
Militký, J., & Jabbar, A. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.06.014 · Cited by 121
do Nascimento, P. H. A., Marim, R. G., de Carvalho, G. M., & Mali, S. (2016) · Materials Research · doi:10.1590/1980-5373-mr-2015-0423 · Cited by 121
Almasi, H., Ghanbarzadeh, B., Dehghannya, J., Entezami, A. A., & Asl, A. K. (2015) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2015.04.003 · Cited by 120
Production of hydroxyapatite-bacterial nanocellulose scaffold with assist of cellulose nanocrystals
Niamsap, T., Lam, N. T., & Sukyai, P. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.10.034 · Cited by 120
Asrofi, M., Abral, H., Kasim, A., Pratoto, A., Mahardika, M., Park, J., & Kim, H. (2018) · Fibers and Polymers · doi:10.1007/s12221-018-7953-1 · Cited by 119
Utilization of acetate buffer to improve bacterial cellulose production by Gluconacetobacter xylinus
Kuo, C., Chen, J., Liou, B., & Lee, C. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2014.12.034 · Cited by 117
Paper in Electronic and Optoelectronic Devices
Ha, D., Fang, Z., & Zhitenev, N. B. (2018) · Advanced Electronic Materials · doi:10.1002/aelm.201700593 · Cited by 117
Xiao, S., Gao, R., Gao, L., & Li, J. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.09.115 · Cited by 116
Larsson, P. A., Berglund, L. A., & Wågberg, L. (2014) · Biomacromolecules · doi:10.1021/bm500360c · Cited by 114
Ahrem, H., Pretzel, D., Endres, M., Conrad, D., Courseau, J., Müller, H., Jaeger, R., Kaps, C., Klemm, D., & Kinne, R. W. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.004 · Cited by 111
Ribeiro, A. S., Costa, S. M., Ferreira, D. P., Calhelha, R. C., Barros, L., Stojković, D. S., Sokóvić, M., Ferreira, I. C. F. R., & Fangueiro, R. M. E. S. (2020) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2020.104808 · Cited by 111
Important Considerations in Manufacturing of Natural Fiber Composites: A Review
Jaafar, J., Siregar, J. P., Salleh, S. M., Hamdan, M. H. M., Cionita, T., & Rihayat, T. (2019) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-019-00097-2 · Cited by 110
Wang, W., Liang, T., Bai, H., Dong, W., & Liu, X. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.098 · Cited by 108
Liu, J., Martin, D. J., Moon, R. J., & Youngblood, J. P. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.41970 · Cited by 107
Cai, J., Chen, J., Zhang, Q., Lei, M., He, J., Xiao, A., Ma, C.-J., Li, S., & Xiong, H. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.12.039 · Cited by 107
Sharma, C., Bhardwaj, N. K., & Pathak, P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.123608 · Cited by 102
Shahabi‐Ghahfarrokhi, I., Khodaiyan, F., Mousavi, M., & Yousefi, H. (2015) · Fibers and Polymers · doi:10.1007/s12221-015-0529-4 · Cited by 101
Morelli, C. L., Belgacem, M. N., Branciforti, M. C., Bretas, R. E. S., Crisci, A., & Bras, J. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.10.038 · Cited by 101
Fonseca, D. F. S., Vilela, C., Pinto, R. J. B., Bastos, V., Oliveira, H., Catarino, J., Faísca, P., Rosado, C., Silvestre, A. J. D., & Freire, C. S. R. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111350 · Cited by 100
Hasanin, M. S., & Kiey, S. A. A. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.06.040 · Cited by 99
Imoisili, P. E., & Jen, T. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.05.121 · Cited by 99
Cao, X., Huang, M., Ding, B., Yu, J., & Sun, G. Z. (2013) · Desalination · doi:10.1016/j.desal.2013.01.031 · Cited by 91
Reis, R. S., Tienne, L. G. P., Souza, D. D. H. S., Marques, M. D. F. V., & Monteiro, S. N. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.05.099 · Cited by 91
Csiszár, E., & Nagy, S. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.06.103 · Cited by 88
Wang, X., Wang, S., Liu, W., Wang, S., Zhang, L., Sang, R., Hou, Q., & Li, J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115213 · Cited by 88
Mukherjee, T., Czaka, M., Kao, N., Gupta, R. K., Choi, H. J., & Bhattacharya, S. N. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.11.047 · Cited by 86
Abral, H., Chairani, M. K., Rizki, M. D., Mahardika, M., Handayani, D., Sugiarti, E., Muslimin, A. N., Sapuan, S. M., & Ilyas, R. A. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.01.057 · Cited by 85
Catalytically Active Bacterial Nanocellulose‐Based Ultrafiltration Membrane
Xu, T., Jiang, Q., Ghim, D., Liu, K., Sun, H., Derami, H. G., Wang, Z., Tadepalli, S., Jun, Y., Zhang, Q., et al. (2018) · Small · doi:10.1002/smll.201704006 · Cited by 83
Confining concrete with sisal and jute FRP as alternatives for CFRP and GFRP
Sen, T., & Paul, A. (2015) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2015.04.001 · Cited by 79
Hassan, S. H. B., Velayutham, T. S., Chen, Y. W., & Lee, H. V. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.03.066 · Cited by 79
Ifuku, S., & Yano, H. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.12.029 · Cited by 78
Green and efficient method for preparing all-cellulose composites with NaOH/urea solvent
Piltonen, P., Hildebrandt, N. C., Westerlind, B. S., Valkama, J., Tervahartiala, T., & Illikainen, M. (2016) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.09.022 · Cited by 78
Apelgren, P., Karabulut, E., Amoroso, M., Mantas, A., Ávila, H. M., Kölby, L., Kondo, T., Toríz, G., & Gatenholm, P. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00157 · Cited by 77
Tan, C., Peng, J., Lin, W., Xing, Y., Xu, K., Wu, J., & Chen, M. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.11.033 · Cited by 75
Lu, Z., Huang, J., Songfeng, E., Li, J., Si, L., Yao, C., Jia, F., & Zhang, M. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116919 · Cited by 74
Jia, B., Li, Y., Yang, B., Xiao, D., Zhang, S., Rajulu, A. V., Kondo, T., Zhang, L., & Zhou, J. (2013) · Cellulose · doi:10.1007/s10570-013-9952-0 · Cited by 72
Saïdi, L., Vilela, C., Oliveira, H., Silvestre, A. J. D., & Freire, C. S. R. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.04.030 · Cited by 72
Melt processing of cellulose nanocrystal reinforced polycarbonate from a masterbatch process
Mariano, M., Kissi, N. E., & Dufresne, A. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.06.007 · Cited by 71
Transparent nanocellulose-pigment composite films
Honorato‐Rios, C., Kumar, V., Liu, J., Koivula, H. M., Xu, C., & Toivakka, M. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9291-7 · Cited by 70
Purandare, S., Gomez, E. F., & Steckl, A. J. (2014) · Nanotechnology · doi:10.1088/0957-4484/25/9/094012 · Cited by 69
Nanofibrillated cellulose: properties reinvestigated
Naderi, A. (2017) · Cellulose · doi:10.1007/s10570-017-1258-1 · Cited by 65
Development of bacterial cellulose and polycaprolactone (PCL) based composite for medical material
Kotcharat, P., Chuysinuan, P., Thanyacharoen, T., Techasakul, S., & Ummartyotin, S. (2021) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2021.100404 · Cited by 63
Review of Silver Nanoparticles (AgNPs)-Cellulose Antibacterial Composites
Xu, Y., Li, S., Yue, X., & Lu, W. (2017) · BioResources · doi:10.15376/biores.13.1.xu · Cited by 63
Anidha, S., Latha, N., & Muthukkumar, M. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.05.008 · Cited by 63
Strength evaluation of jute fabric for the reinforcement of rammed earth structures
Fagone, M., Loccarini, F., & Ranocchiai, G. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.12.054 · Cited by 59
Park, J., Seo, J., Yeom, S.-W., Yao, C. J., Yang, V. W., Cai, Z., Jhon, Y. M., & Ju, B. (2018) · Advanced Optical Materials · doi:10.1002/adom.201701140 · Cited by 53
Sweet Substrate: A Polysaccharide Nanocomposite for Conformal Electronic Decals
Daniele, M. A.-A., Knight, A. J., Roberts, S. A., Radom, K., & Erickson, J. S. (2014) · Advanced Materials · doi:10.1002/adma.201404445 · Cited by 52
Barczewski, M., Matykiewicz, D., & Szostak, M. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.09.120 · Cited by 52
Hu, G., Chen, L., Zhao, S., & Hong, F. F. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131104 · Cited by 49
Ultrasound assisted polyacrylamide grafting on nano-fibrillated cellulose
Sanaeishoar, H., Sabbaghan, M., & Argyropoulos, D. S. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.042 · Cited by 48
Tercjak, A., Gutierrez, J., Barud, H. D. S., Domeneguetti, R. R., & Ribeiro, S. J. L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am508273x · Cited by 46
Hybridization of Hemp Fiber and Recycled-Carbon Fiber in Polypropylene Composites
Shah, N. C., Fehrenbach, J., & Ulven, C. A. (2019) · Sustainability · doi:10.3390/su11113163 · Cited by 45
Wang, Z., Kang, K., Wu, J., Hu, Q., Harper, D. P., Du, G., Wang, S., & Xu, K. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.01.009 · Cited by 45
Kekäläinen, K., Liimatainen, H., Illikainen, M., Maloney, T. C., & Niinimäki, J. (2014) · Cellulose · doi:10.1007/s10570-014-0210-x · Cited by 44
Mohd, N. H., Kargazadeh, H., Miyamoto, M., Uemiya, S., Sharer, N., Baharum, A., Teh, L. P., Ahmad, I. B., Yarmo, M. A., & Othaman, R. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.06.018 · Cited by 43
Palem, R. R., Ramesh, S., Yadav, H. M., Kim, J. H., Sivasamy, A., Kim, H. S., Kim, H. S., Lee, S., & Kang, T. J. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.05.058 · Cited by 42
Shaabani, A., Keshipour, S., Sangachin, M. H., & Seyyedhamzeh, M. (2014) · Journal of Chemical Sciences · doi:10.1007/s12039-013-0535-2 · Cited by 39
Abral, H., Fajri, N., Mahardika, M., Handayani, D., Sugiarti, E., & Kim, H. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.06.023 · Cited by 37
Mechanism of TEMPO-oxidized cellulose nanofibril film reinforcement with poly(acrylamide)
Kurihara, T., & Isogai, A. (2015) · Cellulose · doi:10.1007/s10570-015-0680-5 · Cited by 36
Rosli, N. A., Ishak, W. H. W., & Ahmad, I. B. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.125886 · Cited by 35
Reinforcement of transparent ethylene-co-vinyl acetate rubber by nanocrystalline cellulose
Ma, P., Jiang, L., Hoch, M., Dong, W., & Chen, M. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.01.037 · Cited by 33
Qiu, C., Zhu, K., Yang, W., Wang, Y., Zhang, L., Chen, F., & Fu, Q. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01262 · Cited by 33
Liu, K., Lin, X., Chen, L., Huang, L., & Cao, S. (2013) · Cellulose · doi:10.1007/s10570-013-0145-7 · Cited by 31
Comparison of Biomechanical Properties of Native Menisci and Bacterial Cellulose Implant
Tanaka, M. L., Vest, N., Ferguson, C. M., & Gatenholm, P. (2014) · International Journal of Polymeric Materials · doi:10.1080/00914037.2014.886226 · Cited by 26
Carrillo, C. A., Nypelö, T., & Rojas, O. J. (2016) · Soft Matter · doi:10.1039/c5sm02578h · Cited by 26
Morphological, structural, and thermal analysis of three part of Conocarpus cellulosic fibres
Jawaid, M., Kian, L. K., Fouad, H., Saba, N., Alothman, O. Y., & Hashem, M. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.11.108 · Cited by 26
Alkhatib, Y., Blume, G., Thamm, J., Steiniger, F., Kralisch, D., & Fischer, D. (2020) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2020.10.021 · Cited by 23
Polypropylene/Spray Dried and Silane‐Treated Nanofibrillated Cellulose Composites
TABAK, C., Keskin, S., Akbaşak, T., & Özkoç, G. (2019) · Polymer Engineering and Science · doi:10.1002/pen.25290 · Cited by 21
Highly stretchable composites based on cellulose
Chen, X., Wang, K., Wang, Z., Zeng, H., Yang, T., & Zhang, X. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.12.116 · Cited by 19
Reis, R. S., Souza, D. D. H. S., Marques, M. D. F. V., da Luz, F. S., & Monteiro, S. N. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.05.043 · Cited by 19
Molina-Ramírez, C., Álvarez, J., Zuluaga, R., Castro, C. I., & Gañán, P. F. (2020) · Processes · doi:10.3390/pr8111469 · Cited by 17
UV Treatments on Cotton Fibers
Ferrero, F., Migliavacca, G., & Periolatto, M. (2016) · InTech eBooks · doi:10.5772/63796 · Cited by 16
Widiyanti, P., Amali, M. A., & Aminatun (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.08.091 · Cited by 16
Shanmugam, K., & Browne, C. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820569-3.00010-4 · Cited by 13
Influence of cellulose on the thermal conductivity of cellulose based composite thin films
Rbihi, S., Hallani, G. E., Bakkardouch, F. E., Nouri, A., Lâallam, L., Liba, A., Barroug, A., & Jouaiti, A. (2020) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2020.100790 · Cited by 10
Cited by
Natural fiber reinforced composites: Sustainable materials for emerging applications
Khalid, M. Y., Al Rashid, A., Arif, Z. U., Ahmed, W., Arshad, H., & Zaidi, A. A. (2021) · Results in Engineering · doi:10.1016/j.rineng.2021.100263 · Cited by 600
Self-citationArif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
Self-citationKhalid, M. Y., Arif, Z. U., Ahmed, W., & Arshad, H. (2022) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2021.e00382 · Cited by 314
Self-citationBiopolymeric sustainable materials and their emerging applications
Arif, Z. U., Khalid, M. Y., Sheikh, M. F., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108159 · Cited by 288
Self-citationNovel biopolymer-based sustainable composites for food packaging applications: A narrative review
Khalid, M. Y., & Arif, Z. U. (2022) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2022.100892 · Cited by 287
Self-citation
Metadata
- Authors
- Khalid, M. Y., Al Rashid, A., Arif, Z. U., Ahmed, W., & Arshad, H.
- Venue
- Journal of Materials Research and Technology
- Publisher
- Elsevier BV
- Published
- 2021-09
- Volume
- 14
- Pages
- 2601-2623
- ISSN
- 2214-0697 (ISSN-L)
- 2238-7854
- OpenAlex
- W3189550496
- Cited by
- 260
- References
- 196
- FWCI
- 9.57
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.