The DOI matches its Crossref record; 150 of the 150 references it cites were found in a registry or an index.
Role of porosity defects in metal 3D printing: Formation mechanisms, impacts on properties and mitigation strategies
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ror2 signaling regulates Golgi structure and transport through IFT20 for tumor invasiveness
Nishita, M., Park, S.-Y., Nishio, T., Kamizaki, K., Wang, Z., Tamada, K., Takumi, T., Hashimoto, R., Otani, H., Pazour, G. J., et al. (2017) · Scientific Reports · doi:10.1038/s41598-016-0028-x · Cited by 15,947
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Double-slit photoelectron interference in strong-field ionization of the neon dimer
Kunitski, M., Eicke, N., Huber, P., Köhler, J., Zeller, S., Voigtsberger, J., Schlott, N., Henrichs, K., Sann, H., Trinter, F., et al. (2019) · Nature Communications · doi:10.1038/s41467-018-07882-8 · Cited by 8,162
Double-slit photoelectron interference in strong-field ionization of the neon dimer
Kunitski, M., Eicke, N., Huber, P., Köhler, J., Zeller, S., Voigtsberger, J., Schlott, N., Henrichs, K., Sann, H., Trinter, F., et al. (2019) · Institutional Repository of Leibniz Universität Hannover (Leibniz Universität Hannover) · doi:10.15488/5174 · Cited by 8,161
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Self-citationBone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Self-citationObservation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
King, W. E., Barth, H. D., Castillo, V. M., Gallegos, G. F., Gibbs, J. W., Hahn, D. E., Kamath, C., & Rubenchik, A. M. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.06.005 · Cited by 1,616
Wu, B., Pan, Z., Ding, D., Cuiuri, D., Li, H., Xu, J., & Norrish, J. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.001 · Cited by 1,577
Carroll, B. E., Palmer, T. A., & Beese, A. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.054 · Cited by 1,507
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.11.011 · Cited by 1,475
Metal fatigue : effects of small defects and nonmetallic inclusions
村上, 敬. (2002) · Elsevier eBooks · Cited by 1,457
Computational Design of Hierarchically Structured Materials
Olson, G. B. (1997) · Science · doi:10.1126/science.277.5330.1237 · Cited by 1,229
Brandl, E., Heckenberger, U., Holzinger, V., & Buchbinder, D. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.07.067 · Cited by 1,151
Effects of defects, inclusions and inhomogeneities on fatigue strength
MURAKAMI, Y., & Endo, M. (1994) · International Journal of Fatigue · doi:10.1016/0142-1123(94)90001-9 · Cited by 1,102
Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
Cunningham, R., Zhao, C., Parab, N., Kantzos, C., Pauza, J., Fezzaa, K., Sun, T., & Rollett, A. D. (2019) · Science · doi:10.1126/science.aav4687 · Cited by 1,066
Additive manufacturing of multi-material structures
Bandyopadhyay, A., & Heer, B. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.04.001 · Cited by 1,029
Self-citationSanaei, N., & Fatemi, A. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100724 · Cited by 1,029
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
Yadollahi, A., & Shamsaei, N. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.01.001 · Cited by 1,023
Gong, H., Rafi, K., Gu, H., Janaki Ram, G. D., Starr, T., & Stucker, B. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.147 · Cited by 940
Selective laser melting of aluminium components
Louvis, E., Fox, P., & Sutcliffe, C. J. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.019 · Cited by 933
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
Edwards, P., & Ramulu, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.041 · Cited by 874
Additive manufacturing of advanced ceramic materials
Lakhdar, Y., Tuck, C., Binner, J., Terry, A., & Goodridge, R. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100736 · Cited by 857
Grain structure control during metal 3D printing by high-intensity ultrasound
Todaro, C. J., Easton, M. A., Qiu, D., Zhang, D., Bermingham, M. J., Lui, E. W., Brandt, M., StJohn, D. H., & Qian, M. (2020) · Nature Communications · doi:10.1038/s41467-019-13874-z · Cited by 848
Kasperovich, G., Haubrich, J., Gussone, J., & Requena, G. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.070 · Cited by 818
In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
Leung, C. L. A., Marussi, S., Atwood, R. C., Towrie, M., Withers, P. J., & Lee, P. D. (2018) · Nature Communications · doi:10.1038/s41467-018-03734-7 · Cited by 817
Fundamental aspects of hot isostatic pressing: An overview
Atkinson, H. V., & Davies, S. (2000) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-000-0078-2 · Cited by 784
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
Kasperovich, G., & Hausmann, J. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.01.025 · Cited by 735
Strategies for improving the sustainability of structural metals
Raabe, D., Tasan, C. C., & Olivetti, E. A. (2019) · Nature · doi:10.1038/s41586-019-1702-5 · Cited by 724
du Plessis, A., Yadroitsava, I., & Yadroitsev, I. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108385 · Cited by 712
Xu, W., Lui, E. W., Pateras, A., Qian, M., & Brandt, M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.027 · Cited by 687
Critical instability at moving keyhole tip generates porosity in laser melting
Zhao, C., Parab, N. D., Li, X., Fezzaa, K., Tan, W., Rollett, A. D., & Sun, T. (2020) · Science · doi:10.1126/science.abd1587 · Cited by 673
State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design
Dass, A., & Moridi, A. (2019) · Coatings · doi:10.3390/coatings9070418 · Cited by 667
Beretta, S., & Romano, S. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.06.020 · Cited by 635
Mesoscopic simulation model of selective laser melting of stainless steel powder
Khairallah, S. A., & Anderson, A. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.06.001 · Cited by 616
Tammas-Williams, S., Zhao, H., Léonard, F., Derguti, F., Todd, I., & Prangnell, P. B. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.02.008 · Cited by 590
Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
Weingarten, C., Buchbinder, D., Pirch, N., Meiners, W., Wissenbach, K., & Poprawe, R. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.013 · Cited by 585
Liu, Y. J., Li, S. J., Wang, H. L., Hou, W. T., Hao, Y. L., Yang, R., Sercombe, T. B., & Zhang, L. C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.04.029 · Cited by 584
Li, P., Warner, D. H., Fatemi, A., & Phan, N. (2016) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2015.12.003 · Cited by 546
Scientific, technological and economic issues in metal printing and their solutions
DebRoy, T., Mukherjee, T., Milewski, J. O., Elmer, J. W., Ribic, B., Blecher, J. J., & Zhang, W. (2019) · Nature Materials · doi:10.1038/s41563-019-0408-2 · Cited by 543
Masuo, H., Tanaka, Y., Morokoshi, S., Yagura, H., Uchida, T., Yamamoto, Y., & Murakami, Y. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.07.020 · Cited by 539
Mechanistic models for additive manufacturing of metallic components
Wei, H. L., Mukherjee, T., Zhang, W., Zuback, J. S., Knapp, G. L., De, A., & DebRoy, T. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100703 · Cited by 530
Romano, S., Brückner-Foit, A., Brandão, A., Gumpinger, J., Ghidini, T., & Beretta, S. (2018) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2017.11.002 · Cited by 521
Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing
Khairallah, S. A., Martin, A. A., Lee, J. R. I., Guss, G., Calta, N. P., Hammons, J. A., Nielsen, M. H., Chaput, K., Schwalbach, E., Shah, M. N., et al. (2020) · Science · doi:10.1126/science.aay7830 · Cited by 506
Metallurgy, mechanistic models and machine learning in metal printing
DebRoy, T., Mukherjee, T., Wei, H. L., Elmer, J. W., & Milewski, J. O. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00236-1 · Cited by 497
The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components
Tammas-Williams, S., Withers, P. J., Todd, I., & Prangnell, P. B. (2017) · Scientific Reports · doi:10.1038/s41598-017-06504-5 · Cited by 494
Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting
Ming, T., & Pistorius, P. C. (2016) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.06.002 · Cited by 487
Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime
Günther, J., Krewerth, D., Lippmann, T., Leuders, S., Tröster, T., Weidner, A., Biermann, H., & Niendorf, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.05.018 · Cited by 475
Modeling of additive manufacturing processes for metals: Challenges and opportunities
Francois, M. M., Sun, A., King, W. E., Henson, N. J., Tourret, D., Bronkhorst, C. A., Carlson, N. N., Newman, C. K., Haut, T., Bakosi, J., et al. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2016.12.001 · Cited by 462
In situ design of advanced titanium alloy with concentration modulations by additive manufacturing
Zhang, T., Huang, Z., Yang, T., Kong, H., Luan, J., Wang, A., Wang, D., Kuo, W., Wang, Y., & Liu, C. T. (2021) · Science · doi:10.1126/science.abj3770 · Cited by 460
Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance
Edwards, P., O'Conner, A., & Ramulu, M. (2013) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4025773 · Cited by 450
Kobryn, P. A., Moore, E. H., & Semiatin, S. L. (2000) · Scripta Materialia · doi:10.1016/s1359-6462(00)00408-5 · Cited by 428
Duan, B., Wang, M., Zhou, W. Y., Cheung, W. L., Li, Z. Y., & Lu, W. W. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.06.024 · Cited by 420
Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control
Slotwinski, J. A., Garboczi, E. J., & Hebenstreit, K. M. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.019 · Cited by 408
Balling phenomena in selective laser melted tungsten
Zhou, X., Liu, X., Zhang, D., Shen, Z., & Liu, W. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.032 · Cited by 399
Multi-scale defects in powder-based additively manufactured metals and alloys
Fu, J., Li, H., Song, X., & Fu, M. W. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.02.015 · Cited by 391
Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting
Greitemeier, D., Palm, F., Syassen, F., & Melz, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.05.001 · Cited by 385
Hrabe, N., Gnäupel-Herold, T., & Quinn, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.04.022 · Cited by 355
Yadroitsev, I., Thivillon, L., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.08.046 · Cited by 351
Defect generation and propagation mechanism during additive manufacturing by selective beam melting
Bauereiß, A., Scharowsky, T., & Körner, C. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.05.002 · Cited by 351
Porosity prediction: Supervised-learning of thermal history for direct laser deposition
Khanzadeh, M., Chowdhury, S., Marufuzzaman, M., Tschopp, M. A., & Bian, L. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.04.001 · Cited by 338
The effect of powder oxidation on defect formation in laser additive manufacturing
Leung, C. L. A., Marussi, S., Towrie, M., Atwood, R. C., Withers, P. J., & Lee, P. D. (2019) · Acta Materialia · doi:10.1016/j.actamat.2018.12.027 · Cited by 336
Cunningham, R., Narra, S. P., Montgomery, C., Beuth, J., & Rollett, A. D. (2017) · JOM · doi:10.1007/s11837-016-2234-1 · Cited by 334
Mechanism of keyhole pore formation in metal additive manufacturing
Wang, L., Zhang, Y., Chia, H. Y., & Yan, W. (2022) · npj Computational Materials · doi:10.1038/s41524-022-00699-6 · Cited by 323
Self-citationChen, G., Zhao, S. Y., Tan, P., Wang, J., Xiang, C. S., & Tang, H. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.04.013 · Cited by 321
A two-dimensional transient model for convection in laser melted pool
Chan, C., Mazumder, J., & Chen, M. M. (1984) · Metallurgical Transactions A · doi:10.1007/bf02647100 · Cited by 316
Dynamic simulation of dispersed gas-liquid two-phase flow using a discrete bubble model
Delnoij, E., Lammers, F. A., Kuipers, J. A. M., & van Swaaij, W. P. M. (1997) · Chemical Engineering Science · doi:10.1016/s0009-2509(96)00515-5 · Cited by 314
Damage evolution and failure mechanisms in additively manufactured stainless steel
Carlton, H. D., Haboub, A., Gallegos, G. F., Parkinson, D. Y., & MacDowell, A. A. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.073 · Cited by 313
Fabrication of large Ti–6Al–4V structures by direct laser deposition
Qiu, C., Ravi, G. A., Dance, C., Ranson, A., Dilworth, S., & Attallah, M. M. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.12.234 · Cited by 304
Benedetti, M., Fontanari, V., Bandini, M., Zanini, F., & Carmignato, S. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.10.021 · Cited by 297
Selective laser melting of Invar 36: Microstructure and properties
Qiu, C., Adkins, N. J. E., & Attallah, M. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.10.020 · Cited by 292
Tammas-Williams, S., Withers, P. J., Todd, I., & Prangnell, P. B. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.05.002 · Cited by 288
Feedstock powder processing research needs for additive manufacturing development
Anderson, I. E., White, E. M. H., & Dehoff, R. (2018) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2018.01.002 · Cited by 286
Defects-dictated tensile properties of selective laser melted Ti-6Al-4V
Voisin, T., Calta, N. P., Khairallah, S. A., Forien, J., Balogh, L., Cunningham, R., Rollett, A. D., & Wang, Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.08.004 · Cited by 277
Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties
Qian, M., Xu, W., Brandt, M., & Tang, H. P. (2016) · MRS Bulletin · doi:10.1557/mrs.2016.215 · Cited by 275
Qualification of AM parts: Extreme value statistics applied to tomographic measurements
Romano, S., Brandão, A., Gumpinger, J., Gschweitl, M., & Beretta, S. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.05.091 · Cited by 269
Zerbst, U., Bruno, G., Buffière, J.-Y., Wegener, T., Niendorf, T., Wu, T., Zhang, X., Kashaev, N., Meneghetti, G., Hrabe, N., et al. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100786 · Cited by 263
Mukherjee, T., Wei, H. L., De, A., & DebRoy, T. (2018) · Computational Materials Science · doi:10.1016/j.commatsci.2018.04.027 · Cited by 259
Mitigation of lack of fusion defects in powder bed fusion additive manufacturing
Mukherjee, T., & DebRoy, T. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.10.028 · Cited by 256
Smith, J., Xiong, W., Yan, W., Lin, S., Cheng, P., Kafka, O. L., Wagner, G. J., Cao, J., & Liu, W. K. (2016) · Computational Mechanics · doi:10.1007/s00466-015-1240-4 · Cited by 255
Self-citationYan, W., Lin, S., Kafka, O. L., Lian, Y., Yu, C., Liu, Z., Yan, J., Wolff, S., Wu, H., Ndip-Agbor, E., et al. (2018) · Computational Mechanics · doi:10.1007/s00466-018-1539-z · Cited by 252
Self-citationHigh density selective laser melting of Waspaloy®
Mumtaz, K. A., Erasenthiran, P., & Hopkinson, N. (2008) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2007.04.117 · Cited by 245
Scaling laws for the additive manufacturing
Rubenchik, A. M., King, W. E., & Wu, S. S. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.02.034 · Cited by 242
Hu, Y., Wu, S., Wu, Z., Zhong, X., Ahmed, S., Karabal, S., Xiao, X., Zhang, H. O., & Withers, P. J. (2020) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2020.105584 · Cited by 240
Growth and stability of interacting surface flaws of arbitrary shape
MURAKAMI, Y., & Nemat-Nasser, S. (1983) · Engineering Fracture Mechanics · doi:10.1016/0013-7944(83)90027-9 · Cited by 239
Bayat, M., Mohanty, S., & Hattel, J. H. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.05.003 · Cited by 239
Sing, S. L., Lam, L. P., Zhang, D. Q., Liu, Z. H., & Chua, C. K. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.07.007 · Cited by 238
Malekipour, E., & El-Mounayri, H. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1172-6 · Cited by 230
MURAKAMI, Y., & Beretta, S. (1999) · Extremes · doi:10.1023/a:1009976418553 · Cited by 218
3D-imaging of selective laser melting defects in a Co–Cr–Mo alloy by synchrotron radiation micro-CT
Zhou, X., Wang, D., Liu, X., Zhang, D., Qu, S., Ma, J., London, G., Shen, Z., & Liu, W. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.014 · Cited by 216
Methods for Rapid Pore Classification in Metal Additive Manufacturing
Snell, R., Tammas-Williams, S., Chechik, L., Lyle, A., Hernández-Nava, E., Boig, C., Panoutsos, G., & Todd, I. (2020) · JOM · doi:10.1007/s11837-019-03761-9 · Cited by 211
MURAKAMI, Y. (1994) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.099.032 · Cited by 210
Prithivirajan, V., & Sangid, M. D. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.04.022 · Cited by 204
Romano, S., Nezhadfar, P. D., Shamsaei, N., Seifi, M., & Beretta, S. (2020) · Theoretical and Applied Fracture Mechanics · doi:10.1016/j.tafmec.2020.102477 · Cited by 197
Additive manufacturing of bimetallic structures
Bandyopadhyay, A., Zhang, Y., & Onuike, B. (2022) · Virtual and Physical Prototyping · doi:10.1080/17452759.2022.2040738 · Cited by 196
Self-citationDarvish, K., Chen, Z. W., & Pasang, T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.09.086 · Cited by 193
High cycle fatigue in selective laser melted Ti-6Al-4V
Kumar, P., & Ramamurty, U. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.05.041 · Cited by 188
Modified NASGRO equation for physically short cracks
Maierhofer, J., Pippan, R., & Gänser, H.-P. (2014) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2013.08.019 · Cited by 180
Defects as a root cause of fatigue failure of metallic components. II: Non-metallic inclusions
Zerbst, U., Madia, M., Klinger, C., Bettge, D., & MURAKAMI, Y. (2019) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2019.01.054 · Cited by 179
Sun, G., Zhou, R., Lu, J., & Mazumder, J. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.09.028 · Cited by 177
Ultrafast 3D printing with submicrometer features using electrostatic jet deflection
Liashenko, I., Rosell-Llompart, J., & Cabot, A. (2020) · Nature Communications · doi:10.1038/s41467-020-14557-w · Cited by 177
Location, location & size: defects close to surfaces dominate fatigue crack initiation
Serrano‐Munoz, I., Buffière, J., Mokso, R., Verdu, C., & Nadot, Y. (2017) · Scientific Reports · doi:10.1038/srep45239 · Cited by 176
Cong, W., & Ning, F. (2017) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2017.04.008 · Cited by 176
Xie, C., Wu, S., Yu, Y., Zhang, H., Hu, Y., Zhang, M., & Wang, G. (2021) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2020.117039 · Cited by 172
Defects as a root cause of fatigue failure of metallic components. I: Basic aspects
Zerbst, U., Madia, M., Klinger, C., Bettge, D., & Murakami, Y. (2019) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2019.01.055 · Cited by 168
Meneghetti, G., Rigon, D., & Gennari, C. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.08.034 · Cited by 164
Larrosa, N. O., Wang, W., Read, N., Loretto, M. H., Evans, C., Carr, J., Tradowsky, U., Attallah, M. M., & Withers, P. J. (2018) · Theoretical and Applied Fracture Mechanics · doi:10.1016/j.tafmec.2018.09.011 · Cited by 161
Wolff, S. J., Wang, H., Gould, B., Parab, N., Wu, Z., Zhao, C., Greco, A., & Sun, T. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103743 · Cited by 161
Cunningham, R., Narra, S. P., Ozturk, T., Beuth, J., & Rollett, A. D. (2016) · JOM · doi:10.1007/s11837-015-1802-0 · Cited by 159
Zerbst, U., Madia, M., Klinger, C., Bettge, D., & MURAKAMI, Y. (2019) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2019.01.034 · Cited by 153
Liu, R., Liu, S., & Zhang, X. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-06640-3 · Cited by 147
Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting
Leuders, S., Vollmer, M., Brenne, F., Tröster, T., & Niendorf, T. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2864-x · Cited by 146
Defect-based fatigue life prediction of L-PBF additive manufactured metals
Sanaei, N., & Fatemi, A. (2021) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2021.107541 · Cited by 146
Ferro, P., Meneghello, R., Savio, G., & Berto, F. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05949-9 · Cited by 125
Free Form Fabrication of Metallic Components Using Laser Engineered Net Shaping (Lens)
Greene, D. L. (2018) · Texas ScholarWorks (Texas Digital Library) · doi:10.15781/t26689430 · Cited by 122
Wilson-Heid, A. E., Novak, T. C., & Beese, A. M. (2018) · Experimental Mechanics · doi:10.1007/s11340-018-00465-0 · Cited by 122
Manipulating molten pool dynamics during metal 3D printing by ultrasound
Yang, Z., Wang, S., Zhu, L., Ning, J., Xin, B., Dun, Y., & Yan, W. (2022) · Applied Physics Reviews · doi:10.1063/5.0082461 · Cited by 121
Self-citationJeon, J. M., Park, J. M., Yu, J., Kim, J. G., Seong, Y., Park, S. H., & Kim, H. S. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138152 · Cited by 118
Topologically engineered 3D printed architectures with superior mechanical strength
Ambekar, R. S., Kushwaha, B., Sharma, P., Bosia, F., Fraldi, M., Pugno, N. M., & Tiwary, C. S. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.014 · Cited by 111
Andreau, O., Pessard, É., Koutiri, I., Peyre, P., & Saintier, N. (2020) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2020.105930 · Cited by 110
Montalbano, T. J., Briggs, B. N., Waterman, J. L., Nimer, S., Peitsch, C., Sopcisak, J. J., Trigg, D., & Storck, S. (2021) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2021.117113 · Cited by 108
In Situ Analysis of Laser Powder Bed Fusion Using Simultaneous High-Speed Infrared and X-ray Imaging
Gould, B., Wolff, S. J., Parab, N. D., Zhao, C., Lorenzo-Martin, M. C., Fezzaa, K., Greco, A. C., & Sun, T. (2020) · JOM · doi:10.1007/s11837-020-04291-5 · Cited by 102
The hydrodynamics of bubble rise and impact with solid surfaces
Manica, R., Klaseboer, E., & Chan, D. Y. C. (2016) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2016.06.010 · Cited by 91
Multiaxial fatigue of additive manufactured metals: Performance, analysis, and applications
Fatemi, A., Molaei, R., & Phan, N. (2020) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2020.105479 · Cited by 83
Recent progress in field-assisted additive manufacturing: materials, methodologies, and applications
Hu, Y. (2020) · Materials Horizons · doi:10.1039/d0mh01322f · Cited by 83
Smith, T. R., Sugar, J. D., Schoenung, J. M., & Marchi, C. W. S. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138268 · Cited by 82
Mo, X., Siebecker, M. G., Gou, W., Li, L., & Li, W. (2020) · Pedosphere · doi:10.1016/s1002-0160(20)60017-0 · Cited by 81
Solubility of argon in laser additive manufactured α-titanium under hot isostatic pressing condition
Shao, S., Mahtabi, M. J., Shamsaei, N., & Thompson, S. M. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2017.01.040 · Cited by 80
3D Printed Materials in Water Treatment Applications
Ghosal, P., Gupta, B., Ambekar, R. S., Rahman, M. M., Ajayan, P. M., Aich, N., Gupta, A. K., & Tiwary, C. S. (2021) · Advanced Sustainable Systems · doi:10.1002/adsu.202100282 · Cited by 70
Effect of microstructure and defects on fatigue behaviour of directed energy deposited Ti–6Al–4V
Prabhu, A. W., Vincent, T., Chaudhary, A., Zhang, W., & Babu, S. S. (2015) · Science and Technology of Welding & Joining · doi:10.1179/1362171815y.0000000050 · Cited by 69
Garg, A., Lam, J. S. L., & Savalani, M. M. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-6989-2 · Cited by 69
Lv, F., Liang, H., Xie, D., Mao, Y., Wang, C., Shen, L., & Tian, Z. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.156866 · Cited by 69
Utyaganova, V. R., Филиппов, А. В., Shamarin, N. N., Vorontsov, A. V., Савченко, Н. Л., Фортуна, С. В., Gurianov, D. A., Chumaevskii, A. V., Рубцов, В. Е., & Tarasov, S. Y. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05539-9 · Cited by 61
Yamashita, Y., Murakami, T., Mihara, R., Okada, M., & MURAKAMI, Y. (2017) · Procedia Structural Integrity · doi:10.1016/j.prostr.2017.11.054 · Cited by 55
A Study of the Effect of Porosity Content on the Ductility of Sintered Metals
Haynes, R. (1977) · Powder Metallurgy · doi:10.1179/pom.1977.20.1.17 · Cited by 53
Characteristics and Processing of Hydrogen-Treated Copper Powders for EB-PBF Additive Manufacturing
Ledford, C., Rock, C., Carriere, P. R., Frigola, P., Gamzina, D., & Horn, T. (2019) · Applied Sciences · doi:10.3390/app9193993 · Cited by 52
Wang, P., Goh, M. H., Li, Q., Nai, M. L. S., & Wei, J. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2020.1733430 · Cited by 46
Synchrotron-based X-ray microscopic studies for bioeffects of nanomaterials
Zhu, Y. J., Cai, X., Li, J., Zhong, Z., Huang, Q., & Fan, C. (2013) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2013.11.005 · Cited by 43
Zerbst, U., & Hilgenberg, K. (2017) · Procedia Structural Integrity · doi:10.1016/j.prostr.2017.11.071 · Cited by 35
Possibilities of CT Scanning as Analysis Method in Laser Additive Manufacturing
Karme, A., Kallonen, A., Matilainen, V., Piili, H., & Salminen, A. (2015) · Physics Procedia · doi:10.1016/j.phpro.2015.11.049 · Cited by 30
Groden, C., Traxel, K. D., Afrouzian, A., et al. (2022) · Virtual and Physical Prototyping · doi:10.1080/17452759.2022.2025673 · Cited by 30
Additive manufacturing powder feedstock characterization using X-ray tomography
Bernier, F., Tahara, R., & Gendron, M. (2018) · Metal Powder Report · doi:10.1016/j.mprp.2018.01.002 · Cited by 29
2D nanomaterials in 3D/4D-printed biomedical devices
Das, M., Ambekar, R. S., Panda, S. K., Chakraborty, S. K., & Tiwary, C. S. (2021) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-021-00287-2 · Cited by 25
How defects depend on geometry and scanning strategy in additively manufactured AlSi10Mg
Englert, L., Czink, S., Dietrich, S., & Schulze, V. K. (2021) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2021.117331 · Cited by 23
Hu, D., Pan, J., Mao, J., Hu, S., Liu, X., Fu, Y., & Wang, R. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109353 · Cited by 20
Cited by
Mostafaei, A., Ghiaasiaan, R., Ho, I.-T., Strayer, S., Chang, K.-C., Shamsaei, N., Shao, S., Paul, S., Yeh, A.-C., Tin, S., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101108 · Cited by 531
High fatigue resistance in a titanium alloy via near-void-free 3D printing
Qu, Z., Zhang, Z., Liu, R., Xu, L., Zhang, Y., Li, X., Zhao, Z., Duan, Q., Wang, S., Li, S., et al. (2024) · Nature · doi:10.1038/s41586-024-07048-1 · Cited by 285
Self-citation
Metadata
- Authors
- Wang, S., Ning, J., Zhu, L., Yang, Z., Yan, W., Dun, Y., Xue, P., Xu, P., Bose, S., & Bandyopadhyay, A.
- Venue
- Materials Today
- Publisher
- Elsevier BV
- Published
- 2022-10
- Volume
- 59
- Pages
- 133-160
- ISSN
- 1369-7021 (ISSN-L)
- OpenAlex
- W4295300842
- Cited by
- 279
- References
- 150
- FWCI
- 20.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.