The DOI matches its Crossref record; 94 of the 94 references it cites were found in a registry or an index.
Biodegradable magnesium alloys for orthopaedic applications: A review on corrosion, biocompatibility and surface modifications
Open accessAbstract
Magnesium (Mg) and its alloys have been extensively explored as potential biodegradable implant materials for orthopaedic applications (e.g. Fracture fixation). However, the rapid corrosion of Mg based alloys in physiological conditions has delayed their introduction for therapeutic applications to date. The present review focuses on corrosion, biocompatibility and surface modifications of biodegradable Mg alloys for orthopaedic applications. Initially, the corrosion behaviour of Mg alloys and the effect of alloying elements on corrosion and biocompatibility is discussed. Furthermore, the influence of polymeric deposit coatings, namely sol-gel, synthetic aliphatic polyesters and natural polymers on corrosion and biological performance of Mg and its alloy for orthopaedic applications are presented. It was found that inclusion of alloying elements such as Al, Mn, Ca, Zn and rare earth elements provides improved corrosion resistance to Mg alloys. It has been also observed that sol-gel and synthetic aliphatic polyesters based coatings exhibit improved corrosion resistance as compared to natural polymers, which has higher biocompatibility due to their biomimetic nature. It is concluded that, surface modification is a promising approach to improve the performance of Mg-based biomaterials for orthopaedic applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(1990) · Cited by 9,358
(2013) · doi:10.1016/c2009-0-02433-7 · Cited by 5,127
Magnesium and its alloys as orthopedic biomaterials: A review
Staiger, M. P., Pietak, A. M., Huadmai, J., & Dias, G. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.003 · Cited by 4,452
Biodegradable polymers as biomaterials
Nair, L. S., & Laurencin, C. T. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.017 · Cited by 4,416
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
Rezwan, K., Chen, Q. Z., Blaker, J. J., & Boccaccini, A. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.039 · Cited by 3,839
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
Mechanical properties and the hierarchical structure of bone
Rho, J.-Y., Kuhn-Spearing, L., & Zioupos, P. (1998) · Medical Engineering & Physics · doi:10.1016/s1350-4533(98)00007-1 · Cited by 2,588
Zheng, Y. F., Gu, X. N., & Witte, F. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.01.001 · Cited by 2,436
In vivo corrosion of four magnesium alloys and the associated bone response
Witte, F., Kaese, V., Haferkamp, H., Switzer, E., Meyer-Lindenberg, A., Wirth, C. J., & Windhagen, H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.09.049 · Cited by 2,395
Corrosion Mechanisms of Magnesium Alloys
Song, G. L., & Atrens, A. (1999) · Advanced Engineering Materials · doi:10.1002/(sici)1527-2648(199909)1:1<11::aid-adem11>3.0.co;2-n · Cited by 2,365
Recent advances in bone tissue engineering scaffolds
Bose, S., Roy, M., & Bandyopadhyay, A. (2012) · Trends in Biotechnology · doi:10.1016/j.tibtech.2012.07.005 · Cited by 2,206
Mechanical properties of biomedical titanium alloys
Niinomi, M. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(97)00806-x · Cited by 2,157
Understanding Magnesium Corrosion—A Framework for Improved Alloy Performance
Song, G., & Atrens, A. (2003) · Advanced Engineering Materials · doi:10.1002/adem.200310405 · Cited by 2,056
The history of biodegradable magnesium implants: A review☆
Witte, F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.028 · Cited by 1,860
Degradable biomaterials based on magnesium corrosion
Witte, F., Hort, N., Vogt, C., Cohen, S., Kainer, K. U., Willumeit, R., & Feyerabend, F. (2008) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2009.04.001 · Cited by 1,820
Biodegradable synthetic polymers for tissue engineering
CSIRO Molecular Science, B. 1., & Gunatillake, P. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a01 · Cited by 1,765 · cited 7×
“PLA is highly biocompatible, semi crystalline and hydrophobic in nature [24].”
BackgroundInfluentialControl of biodegradation of biocompatable magnesium alloys
Song, G. (2007) · Corrosion Science · doi:10.1016/j.corsci.2007.01.001 · Cited by 1,514
Cellular and molecular mechanisms of bone remodeling
Raggatt, L. J., & Partridge, N. C. (2010) · Journal of Biological Chemistry · doi:10.1074/jbc.r109.041087 · Cited by 1,402
Fabrication methods of porous metals for use in orthopaedic applications
Ryan, G., Pandit, A., & Apatsidis, D. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.002 · Cited by 1,391
In vitro and in vivo corrosion measurements of magnesium alloys
Witte, F., Fischer, J., Nellesen, J., Crostack, H.-A., Kaese, V., Pisch, A., Beckmann, F., & Windhagen, H. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.037 · Cited by 1,386
Research on an Mg–Zn alloy as a degradable biomaterial
Zhang, S., Zhang, X., Zhao, C., Li, J., Song, Y., Xie, C., Tao, H., Zhang, Y., He, Y., Jiang, Y., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.06.028 · Cited by 1,336
Kirkland, N. T., Birbilis, N., & Staiger, M. P. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.11.014 · Cited by 856
Development of nanocomposites for bone grafting
MURUGAN, R., & RAMAKRISHNA, S. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.07.022 · Cited by 742
In vitro studies of biomedical magnesium alloys in a simulated physiological environment: A review
Xin, Y., Hu, T., & Chu, P. K. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.12.004 · Cited by 729
Miller, R. A., Brady, J. M., & Cutright, D. E. (1977) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820110507 · Cited by 722
Stress shielding and bone resorption in shoulder arthroplasty
Nagels, J., Stokdijk, M., & Rozing, P. M. (2003) · Journal of Shoulder and Elbow Surgery · doi:10.1067/mse.2003.22 · Cited by 707
Progress and Challenge for Magnesium Alloys as Biomaterials
Zeng, R., Dietzel, W., Witte, F., Hort, N., & Blawert, C. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200800035 · Cited by 680
Fibrillar Structure and Mechanical Properties of Collagen
Fratzl, P., Misof, K., Zizak, I., Rapp, G., Amenitsch, H., & Bernstorff, S. (1998) · Journal of Structural Biology · doi:10.1006/jsbi.1998.3966 · Cited by 667
Injectable, Biodegradable Hydrogels for Tissue Engineering Applications
Tan, H., & Marra, K. G. (2010) · Materials · doi:10.3390/ma3031746 · Cited by 639
Magnesium alloys as implant materials – Principles of property design for Mg–RE alloys☆
Hort, N., Huang, Y., Fechner, D., Störmer, M., Blawert, C., Witte, F., Vogt, C., Drücker, H., Willumeit‐Römer, R., & Kainer, K. U. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.010 · Cited by 608
Feyerabend, F., Fischer, J., Holtz, J., Witte, F., Willumeit, R., Drücker, H., Vogt, C., & Hort, N. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.024 · Cited by 598
Ceramics: Mechanical properties, failure behaviour, materials selection
(2000) · Annales de Chimie Science des Mat�riaux · doi:10.1016/s0151-9107(00)88627-4 · Cited by 595
Synthetic biodegradable functional polymers for tissue engineering: a brief review
Guo, B., & Ma, P. X. (2014) · Science China Chemistry · doi:10.1007/s11426-014-5086-y · Cited by 592
Sell, S. A., Wolfe, P. S., Garg, K., McCool, J. M., Rodriguez, I. A., & Bowlin, G. L. (2010) · Polymers · doi:10.3390/polym2040522 · Cited by 578
Biocomposites containing natural polymers and hydroxyapatite for bone tissue engineering
Swetha, M., Sahithi, K., Moorthi, A., Srinivasan, N., Ramasamy, K., & Selvamurugan, N. (2010) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2010.03.015 · Cited by 548
Ding, Y., Wen, C., Hodgson, P., & Li, Y. (2014) · J. Mater. Chem. B · doi:10.1039/c3tb21746a · Cited by 531
Mg and Mg alloys: How comparable are in vitro and in vivo corrosion rates? A review
Sanchez, A. H. M., Luthringer, B. J. C., Feyerabend, F., & Willumeit, R. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.11.048 · Cited by 503
Reed, A. M., & Gilding, D. K. (1981) · Polymer · doi:10.1016/0032-3861(81)90168-3 · Cited by 502
Polymer Biodegradation and Biodegradable Polymers - a Review
Leja, K., & Lewandowicz, G. (2010) · Polish Journal of Environmental Studies · Cited by 489
General and Localized Corrosion of Magnesium Alloys: A Critical Review
Ghali, E., Dietzel, W., & Kainer, K.-U. (2004) · Journal of Materials Engineering and Performance · doi:10.1361/10599490417533 · Cited by 476
Recent progress in corrosion protection of magnesium alloys by organic coatings
Hu, R.-G., Zhang, S., Bu, J.-F., Lin, C.-J., & Song, G.-L. (2012) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2011.10.011 · Cited by 472
Review of studies on corrosion of magnesium alloys
ZENG, R.-C., ZHANG, J., HUANG, W.-J., DIETZEL, W., KAINER, K. U., BLAWERT, C., & KE, W. (2006) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(06)60297-5 · Cited by 449
Biodegradable magnesium scaffolds: Part 1: Appropriate inflammatory response
Witte, F., Ulrich, H., Rudert, M., & Willbold, E. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31170 · Cited by 409
Xin, Y., Huo, K., Tao, H., Tang, G., & Chu, P. K. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.05.014 · Cited by 408
Zeng, R.-C., Sun, L., Zheng, Y.-F., Cui, H.-Z., & Han, E.-H. (2014) · Corrosion Science · doi:10.1016/j.corsci.2013.10.028 · Cited by 369
Wright, J. D., & Sommerdijk, N. A. J. M. (2018) · CRC Press eBooks · doi:10.1201/9781315273808 · Cited by 362
Eddy Jai Poinern, G., Brundavanam, S., & Fawcett, D. (2013) · American Journal of Biomedical Engineering · doi:10.5923/j.ajbe.20120206.02 · Cited by 361
In vivo study of magnesium plate and screw degradation and bone fracture healing
Chaya, A., Yoshizawa, S., Verdelis, K., Myers, N., Costello, B. J., Chou, D.-T., Pal, S., Maiti, S., Kumta, P. N., & Sfeir, C. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.02.010 · Cited by 359
Magnesium biomaterials for orthopedic application: A review from a biological perspective
Walker, J., Shadanbaz, S., Woodfield, T. B. F., Staiger, M. P., & Dias, G. J. (2014) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33113 · Cited by 352
Corrosion fatigue behaviors of two biomedical Mg alloys – AZ91D and WE43 – In simulated body fluid
Gu, X. N., Zhou, W. R., Zheng, Y. F., Cheng, Y., Wei, S. C., Zhong, S. P., Xi, T. F., & Chen, L. J. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.07.026 · Cited by 350
Sol-gel materials: chemistry and applications
(2001) · Choice Reviews Online · doi:10.5860/choice.38-6197 · Cited by 350
Polymeric Biomaterials in Tissue Engineering
Kohane, D. S., & Langer, R. (2008) · Pediatric Research · doi:10.1203/01.pdr.0000305937.26105.e7 · Cited by 347
Ishizaki, T., Masuda, Y., & Sakamoto, M. (2011) · Langmuir · doi:10.1021/la2002783 · Cited by 336
Degradable metallic biomaterials: Design and development of Fe–Mn alloys for stents
Hermawan, H., Dube, D., & Mantovani, D. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32224 · Cited by 332
PEGylated PLGA-based nanoparticles targeting M cells for oral vaccination
Garinot, M., Fiévez, V., Pourcelle, V., Stoffelbach, F., des Rieux, A., Plapied, L., Theate, I., Freichels, H., Jérôme, C., Marchand-Brynaert, J., et al. (2007) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.04.021 · Cited by 331
Zeng, R.-C., Cui, L.-Y., Jiang, K., Liu, R., Zhao, B.-D., & Zheng, Y.-F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00527 · Cited by 314
Biodegradable magnesium scaffolds: Part II: Peri‐implant bone remodeling
Witte, F., Ulrich, H., Palm, C., & Willbold, E. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31293 · Cited by 312
Entrapment of biocatalysts in hydrophobic sol‐gel materials for use in organic chemistry
Reetz, M. T. (1997) · Advanced Materials · doi:10.1002/adma.19970091203 · Cited by 296
Takahashi, Y., Yamamoto, M., & Tabata, Y. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.01.012 · Cited by 257
Lhotka, C., Szekeres, T., Steffan, I., Zhuber, K., & Zweymüller, K. (2003) · Journal of Orthopaedic Research® · doi:10.1016/s0736-0266(02)00152-3 · Cited by 248
Mueller, W.-D., Lucia Nascimento, M., & Lorenzo de Mele, M. F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.12.048 · Cited by 237
Effects of metal ions on osteoblast-like cell metabolism and differentiation
Sun, Z. L., Wataha, J. C., & Hanks, C. T. (1997) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199701)34:1<29::aid-jbm5>3.0.co;2-p · Cited by 230
Magnesium alloys: Predicting in vivo corrosion with in vitro immersion testing
Walker, J., Shadanbaz, S., Kirkland, N. T., Stace, E., Woodfield, T., Staiger, M. P., & Dias, G. J. (2012) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.32680 · Cited by 223
The in vivo and in vitro corrosion of high-purity magnesium and magnesium alloys WZ21 and AZ91
Zainal Abidin, N. I., Rolfe, B., Owen, H., Malisano, J., Martin, D., Hofstetter, J., Uggowitzer, P. J., & Atrens, A. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.06.019 · Cited by 218
Shi, P., Ng, W. F., Wong, M. H., & Cheng, F. T. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.01.102 · Cited by 215
Interconnected porous hydroxyapatite ceramics for bone tissue engineering
Yoshikawa, H., Tamai, N., Murase, T., & Myoui, A. (2009) · Journal of The Royal Society Interface · doi:10.1098/rsif.2008.0425.focus · Cited by 203
Corrosion process of pure magnesium in simulated body fluid
Wang, Y., Wei, M., Gao, J., Hu, J., & Zhang, Y. (2008) · Materials Letters · doi:10.1016/j.matlet.2007.11.045 · Cited by 199
Improvement of the mechanical properties of austenitic stainless steel after plasma nitriding
Menthe, E., Bulak, A., Olfe, J., Zimmermann, A., & Rie, K.-T. (2000) · Surface and Coatings Technology · doi:10.1016/s0257-8972(00)00930-0 · Cited by 191
In vitro degradation and cell attachment of a PLGA coated biodegradable Mg–6Zn based alloy
Li, J. N., Cao, P., Zhang, X. N., Zhang, S. X., & He, Y. H. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-4688-9 · Cited by 177
Wen, Z., Wu, C., Dai, C., & Yang, F. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2009.08.147 · Cited by 168
Wu, C., Ramaswamy, Y., Boughton, P., & Zreiqat, H. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.08.010 · Cited by 163
Chen, Y., Song, Y., Zhang, S., Li, J., Zhao, C., & Zhang, X. (2011) · Biomedical Materials · doi:10.1088/1748-6041/6/2/025005 · Cited by 153
Rojaee, R., Fathi, M., & RAEISSI, K. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.05.014 · Cited by 153
Rettig, R., & Virtanen, S. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31550 · Cited by 148
Wei, Q., Becherer, T., Noeske, P.-L. M., Grunwald, I., & Haag, R. (2014) · Advanced Materials · doi:10.1002/adma.201304737 · Cited by 135
Synthetic biodegradable polymers as drug delivery systems for bone morphogenetic proteins
Saito, N., Murakami, N., Takahashi, J. A., Horiuchi, H., Ota, H., Kato, H., Okada, T., Nozaki, K., & Takaoka, K. (2005) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2004.12.016 · Cited by 128
Reconstructing the human body using biomaterials
Agrawal, C. M. (1998) · JOM · doi:10.1007/s11837-998-0064-5 · Cited by 127
Alabbasi, A., Liyanaarachchi, S., & Kannan, M. B. (2012) · Thin Solid Films · doi:10.1016/j.tsf.2012.07.090 · Cited by 124
Biodegradable poly(lactide-co-glycolide) coatings on magnesium alloys for orthopedic applications
Ostrowski, N. J., Lee, B., Roy, A., Ramanathan, M., & Kumta, P. N. (2012) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-012-4773-5 · Cited by 113
Thomann, M., Krause, C., Bormann, D., von der Höh, N., Windhagen, H. J., & Meyer‐Lindenberg, A. (2009) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.200800412 · Cited by 112
Surface modification of an Mg-1Ca alloy to slow down its biocorrosion by chitosan
Gu, X., Zheng, Y., Lan, Q., Cheng, Y., Zhang, Z., Xi, T., & ZHANG, D. (2009) · Biomedical Materials · doi:10.1088/1748-6041/4/4/044109 · Cited by 109
Bai, K., Zhang, Y., Fu, Z., Zhang, C., Cui, X., Meng, E., Guan, S., & Hu, J. (2011) · Materials Letters · doi:10.1016/j.matlet.2011.12.102 · Cited by 96
Electrochemical deposition of conducting polymer coatings on magnesium surfaces in ionic liquid
Luo, X., & Cui, X. T. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.006 · Cited by 94
Production of biological nanoparticles from bovine serum albumin for drug delivery
Rahimnejad, M., Jahanshahi, M., & Najafpour, G. (2006) · AFRICAN JOURNAL OF BIOTECHNOLOGY · doi:10.5897/ajb2006.000-5072 · Cited by 91
Degner, J., Singer, F., Cordero-Arias, L., Boccaccini, A. R., & Virtanen, S. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.05.115 · Cited by 89
Ostrowski, N. J., Lee, B., Enick, N., Carlson, B., Kunjukunju, S., Roy, A., & Kumta, P. N. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.05.010 · Cited by 88
Li, L.-H., Narayanan, T. S. N. S., Kim, Y., et al. (2014) · Thin Solid Films · doi:10.1016/j.tsf.2014.04.004 · Cited by 82
Electrosprayed PLGA smart containers for active anti-corrosion coating on magnesium alloy AMlite
Chen, J., Chen, X., Li, J., Tang, B., Birbilis, N., & Wang, X. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta14999d · Cited by 71
Comparison of morphology and mechanical properties of PLGA bioscaffolds
Leung, L., Chan, C., Baek, S. D., & Naguib, H. E. (2008) · Biomedical Materials · doi:10.1088/1748-6041/3/2/025006 · Cited by 65
Mushahary, D., Wen, C., Kumar, J. M., Lin, J., Nemani, H., Hodgson, P. D., Pande, G., & Li, Y. (2014) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2014.08.005 · Cited by 55
Biodegradable Mg-Ca and Mg-Ca-Y Alloys for Regenerative Medicine
Li, Y., Li, M. H., Hu, W., Hodgson, P., & Wen, C. (2010) · Materials science forum · doi:10.4028/www.scientific.net/msf.654-656.2192 · Cited by 53
Kurniawan, D., Nor, F. M., Lee, H. Y., & Lim, J. Y. (2011) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/0954411911413059 · Cited by 29
Lalk, M., Reifenrath, J., Rittershaus, D., Bormann, D., & Meyer‐Lindenberg, A. (2010) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.201000704 · Cited by 22
Perego (1998) · doi:10.1002/(sici)1097-4628(19960103)59:1<37::aid-app6>3.0.co;2-n
Cited by
Fundamentals and advances in magnesium alloy corrosion
Esmaily, M., Svensson, J. E., Fajardo, S., Birbilis, N., Frankel, G. S., Virtanen, S., Arrabal, R., Thomas, S., & Johansson, L. G. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.011 · Cited by 2,073
Design of biodegradable, implantable devices towards clinical translation
Li, C., Guo, C., Fitzpatrick, V., Ibrahim, A., Zwierstra, M. J., Hanna, P., Lechtig, A., Nazarian, A., Lin, S. J., & Kaplan, D. L. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0150-z · Cited by 808
Chowdhury, S., Yadaiah, N., Prakash, C., Ramakrishna, S., Dixit, S., Gupta, L. R., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.121 · Cited by 784
Bone biomaterials and interactions with stem cells
Gao, C., Peng, S., Feng, P., & Shuai, C. (2017) · Bone Research · doi:10.1038/boneres.2017.59 · Cited by 720
Biodegradable Mg alloys for orthopedic implants – A review
Tsakiris, V., Tardei, C., & Clicinschi, F. M. (2021) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.06.024 · Cited by 612
Metadata
- Authors
- Agarwal, S., Curtin, J., Duffy, B., & Jaiswal, S.
- Venue
- Materials Science and Engineering: C
- Publisher
- Elsevier BV
- Published
- 2016-11
- Volume
- 68
- Pages
- 948-963
- ISSN
- 0928-4931 (ISSN-L)
- OpenAlex
- W2418599019
- Cited by
- 955
- References
- 94
- FWCI
- 25.56
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.