Extraterrestrial construction materials
The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Abstract
In recognition of the 50th anniversary of the first manned lunar landing, the National Aeronautics and Space Administration (NASA), together with the European Space Agency (ESA), revealed plans to resume manned exploration missions and to establish permanent human presence in outposts (habitats) on the Moon and Mars by 2040. In order to promote feasible and sustainable space exploration, these habitats are envisioned to be built from lunar and Martian in-situ resources. Our understanding of such indigenous resources, from materials science, construction and structural engineering points of view, is lacking and continues to hinder further development of Earth-independent habitats. In order to bridge this knowledge gap, a comprehensive assessment on the physical features and property characteristics of extraterrestrial construction materials such as those exploited from the Moon and Mars, mined from near-earth objects (NEOs), or cultured through modern technologies is presented herein. This review explores the suitability of construction materials derived from lunar and Martian regolith along with concrete derivatives, space-native metals and composites, as well as advanced and non-traditional materials for interplanetary construction. This review also identifies processing techniques suitable to produce non-terrestrial construction materials in the alien environment of space (i.e. vacuum, low gravity, etc.) and highlights emerging trends and future directions to stimulate further research in this area.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
Shape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495
Stimulus-responsive shape memory materials: a review
Sun, L., Huang, W. M., Ding, Z., Zhao, Y., Wang, C. C., Purnawali, H., & Tang, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.04.065 · Cited by 1,105
Emerging Artificial Intelligence Methods in Structural Engineering
Salehi, H., & Burgueño, R. (2018) · Engineering Structures · doi:10.1016/j.engstruct.2018.05.084 · Cited by 1,068
Building components for an outpost on the lunar soil by means of a novel 3D printing technology
Cesaretti, G., Dini, E., De Kestelier, X., Colla, V., & Pambaguian, L. (2014) · Acta Astronautica · doi:10.1016/j.actaastro.2013.07.034 · Cited by 806
Metal-matrix composites for space applications
Rawal, S. P. (2001) · JOM · doi:10.1007/s11837-001-0139-z · Cited by 639
The lunar regolith: Chemistry, mineralogy and petrology
Papike, J. J., Simon, S. B., & Laul, J. C. (1982) · Reviews of Geophysics · doi:10.1029/rg020i004p00761 · Cited by 345
Solar 3D printing of lunar regolith
Meurisse, A., Makaya, A., Willsch, C., & Sperl, M. (2018) · Acta Astronautica · doi:10.1016/j.actaastro.2018.06.063 · Cited by 287
Investigation of shape memory polymers and their hybrid composites
Liang, C., Rogers, C. A., & Malafeew, E. (1997) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x9700800411 · Cited by 259
Lunar Source of3He for Commercial Fusion Power
Wittenberg, L. J., Santarius, J. F., & Kulcinski, G. L. (1986) · Fusion Technology · doi:10.13182/fst86-a24972 · Cited by 255
Montes, C., Broussard, K., Gongre, M., Simicevic, N., Mejia, J., Tham, J., Allouche, E., & Davis, G. (2015) · Advances in Space Research · doi:10.1016/j.asr.2015.05.044 · Cited by 193
First demonstration on direct laser fabrication of lunar regolith parts
Krishna Balla, V., Roberson, L. B., O'Connor, G. W., Trigwell, S., Bose, S., & Bandyopadhyay, A. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211271992 · Cited by 186
Evaluations of lunar regolith simulants
Taylor, L. A., Pieters, C. M., & Britt, D. (2016) · Planetary and Space Science · doi:10.1016/j.pss.2016.04.005 · Cited by 183
Sanders, G. B., & Larson, W. E. (2013) · Journal of Aerospace Engineering · doi:10.1061/(asce)as.1943-5525.0000208 · Cited by 173
Sulfur ‘concrete’ for lunar applications–Sublimation concerns
Grugel, R. N., & Toutanji, H. (2008) · Advances in Space Research · doi:10.1016/j.asr.2007.08.018 · Cited by 146
Performance of lunar sulfur concrete in lunar environments
Toutanji, H. A., Evans, S., & Grugel, R. N. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.10.041 · Cited by 144
Robust and elastic lunar and martian structures from 3D-printed regolith inks
Jakus, A. E., Koube, K. D., Geisendorfer, N. R., & Shah, R. N. (2017) · Scientific Reports · doi:10.1038/srep44931 · Cited by 141
Lunar Contour Crafting - A Novel Technique for ISRU-Based Habitat Development
Khoshnevis, B., Bodiford, M., Burks, K., Ethridge, E., Tucker, D., Kim, W., Toutanji, H., & Fiske, M. (2005) · 43rd AIAA Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.2005-538 · Cited by 138
Extra-terrestrial construction processes – Advancements, opportunities and challenges
Lim, S., Prabhu, V. L., Anand, M., & Taylor, L. A. (2017) · Advances in Space Research · doi:10.1016/j.asr.2017.06.038 · Cited by 134
Geopolymers from lunar and Martian soil simulants
Alexiadis, A., Alberini, F., & Meyer, M. E. (2017) · Advances in Space Research · doi:10.1016/j.asr.2016.10.003 · Cited by 133
Preparation of lunar regolith based geopolymer cement under heat and vacuum
Davis, G., Montes, C., & Eklund, S. (2017) · Advances in Space Research · doi:10.1016/j.asr.2017.01.024 · Cited by 126
Sintering of micro-trusses created by extrusion-3D-printing of lunar regolith inks
Taylor, S. L., Jakus, A. E., Koube, K. D., Ibeh, A. J., Geisendorfer, N. R., Shah, R. N., & Dunand, D. C. (2018) · Acta Astronautica · doi:10.1016/j.actaastro.2017.11.005 · Cited by 125
Lunar regolith can allow the synthesis of cement materials with near-zero water consumption
Wang, K.-T., Lemougna, P. N., Tang, Q., Li, W., & Cui, X.-M. (2017) · Gondwana Research · doi:10.1016/j.gr.2016.11.001 · Cited by 120
Moon: Prospective Energy and Material Resources
(2012) · doi:10.1007/978-3-642-27969-0 · Cited by 90
Manufacture of polymeric concrete on the Moon
Sik Lee, T., Lee, J., & Yong Ann, K. (2015) · Acta Astronautica · doi:10.1016/j.actaastro.2015.04.004 · Cited by 88
A structural assessment of unrefined sintered lunar regolith simulant
Indyk, S. J., & Benaroya, H. (2017) · Acta Astronautica · doi:10.1016/j.actaastro.2017.09.018 · Cited by 86
Digital light processing of lunar regolith structures with high mechanical properties
Liu, M., Tang, W., Duan, W., Li, S., Dou, R., Wang, G., Liu, B., & Wang, L. (2019) · Ceramics International · doi:10.1016/j.ceramint.2018.12.049 · Cited by 85
Mechanical behaviour of additively manufactured lunar regolith simulant components
Goulas, A., Binner, J. G., Engstrøm, D. S., Harris, R. A., & Friel, R. J. (2019) · Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications · doi:10.1177/1464420718777932 · Cited by 84
Wang, K.-T., Tang, Q., Cui, X.-M., He, Y., & Liu, L.-P. (2016) · Scientific Reports · doi:10.1038/srep29659 · Cited by 79
Compressive deformation of porous lunar regolith
Gualtieri, T., & Bandyopadhyay, A. (2015) · Materials Letters · doi:10.1016/j.matlet.2014.11.153 · Cited by 73
Lunar Surface Stabilization via Sintering or the Use of Heat Cured Polymers
Hintze, P., Curran, J., & Back, T. (2009) · 47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition · doi:10.2514/6.2009-1015 · Cited by 69
Advanced materials for space applications
Pater, R. H., & Curto, P. A. (2007) · Acta Astronautica · doi:10.1016/j.actaastro.2007.06.002 · Cited by 58
Contour crafting simulation plan for lunar settlement infrastructure buildup
Khoshnevis, B., Carlson, A., Leach, N., & Thangavelu, M. (2012) · Earth and Space 2012 · doi:10.1061/9780784412190.155 · Cited by 50
Chen, T., Chow, B. J., Zhong, Y., Wang, M., Kou, R., & Qiao, Y. (2018) · Advances in Space Research · doi:10.1016/j.asr.2017.10.050 · Cited by 46
Lunar Soil Simulant Electrolysis Using Inert Anode for Al-Si Alloy and Oxygen Production
Liu, A., Shi, Z., Hu, X., Gao, B., & Wang, Z. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1381702jes · Cited by 45
Sibille, L., Sadoway, D., Sirk, A., Tripathy, P., Melendez, O., Standish, E., Dominguez, J., Stefanescu, D., Curreri, P., & Poizeau, S. (2009) · 47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition · doi:10.2514/6.2009-659 · Cited by 42
Bottom-up heating method for producing polyethylene lunar concrete in lunar environment
Lee, J., Ann, K. Y., Lee, T. S., & Mitikie, B. B. (2018) · Advances in Space Research · doi:10.1016/j.asr.2018.03.039 · Cited by 40
Matta, M., Smith, S., Baumgardner, J., Wilson, J., Martinis, C., & Mendillo, M. (2009) · Icarus · doi:10.1016/j.icarus.2009.06.017 · Cited by 37
Additive construction using basalt regolith fines
Mueller, R. P., Sibille, L., Hintze, P. E., Lippitt, T. C., Mantovani, J. G., Nugent, M. W., & Townsend, I. I. (2015) · Earth and Space 2014 · doi:10.1061/9780784479179.042 · Cited by 36
Fusion Power from Lunar Resources
Kulcinski, G. L., & Schmitt, H. H. J. (1992) · Fusion Technology · doi:10.13182/fst92-a29717 · Cited by 33
Production of Glass Fibers for Reinforcement of Lunar Concrete
Tucker, D., Ethridge, E., & Toutanji, H. (2006) · 44th AIAA Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.2006-523 · Cited by 27
Inorganic–organic hybrid of lunar soil simulant and polyethylene
Chen, T., Chow, B. J., Wang, M., Shi, Y., Zhao, C., & Qiao, Y. (2016) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001450 · Cited by 24
Mars: Prospective Energy and Material Resources
(2009) · doi:10.1007/978-3-642-03629-3 · Cited by 23
Key Technology Development for Future Lunar Utilization— Block Production Using Lunar Regolith
HOSHINO, T., WAKABAYASHI, S., YOSHIHARA, S., & HATANAKA, N. (2016) · TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES, AEROSPACE TECHNOLOGY JAPAN · doi:10.2322/tastj.14.pk_35 · Cited by 19
Mechanical properties and durability performance of “waterless concrete”
Toutanji, H. A., & Grugel, R. N. (2008) · Earth & Space 2008 · doi:10.1061/40988(323)46 · Cited by 12
From lunar regolith to fabricated parts: technology developments and the utilization of Moon dirt
McLemore, C. A., Fikes, J. C., McCarley, K. S., Good, J. E., Kennedy, J. P., & Gilley, S. D. (2008) · Earth & Space 2008 · doi:10.1061/40988(323)132 · Cited by 6
Cited by
Geopolymer foams: An overview of recent advancements
Novais, R. M., Pullar, R. C., & Labrincha, J. A. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100621 · Cited by 303
Mills, J. N., Katzarova, M., & Wagner, N. J. (2022) · Advances in Space Research · doi:10.1016/j.asr.2021.10.045 · Cited by 83
Materials characterization of various lunar regolith simulants for use in geopolymer lunar concrete
Collins, P. J., Edmunson, J., Fiske, M., & Radlińska, A. (2022) · Advances in Space Research · doi:10.1016/j.asr.2022.03.012 · Cited by 70
A comprehensive review of lunar-based manufacturing and construction
Azami, M., Kazemi, Z., Moazen, S., Dubé, M., Potvin, M.-J., & Skonieczny, K. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101045 · Cited by 57
Neves, J. M., Ramanathan, S., Suraneni, P., Grugel, R., & Radlińska, A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120315 · Cited by 53
Metadata
- Authors
- Naser, M. Z.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 105
- Pages
- 100577
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W2953665134
- Cited by
- 194
- References
- 46
- FWCI
- 7.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.