Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 78

The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.

Biodegradable PLA-ZnO nanocomposite biomaterials with antibacterial properties, tissue engineering viability, and enhanced biocompatibility

Chong, Wei Juene, Shen, Shirley, Li, Yuncang, Trinchi, Adrian, Pejak Simunec, Dejana, Kyratzis, Ilias (Louis), Sola, Antonella, Wen, Cuie · 2023 · Smart Materials in Manufacturing

Abstract

Polylactic acid (PLA) is a well-known biomaterial on account of its biocompatibility and biodegradability. Zinc oxide (ZnO) nanofillers may endow PLA with advantageous antibacterial and tissue regenerative properties, but may also compromise the biocompatibility of PLA. Several strategies have been developed to improve the biomedical practicality of such composites. The importance of surface properties on amplifying the therapeutic properties and safety of a material enables two potential strategies: (i) surface modification of ZnO nanoparticles, and (ii) surface engineering of the PLA/ZnO composites. Moreover, the controllable biodegradation of PLA allows a third possible strategy: (iii) biodegradation-controlled release of ZnO. The first part of this review introduces the controllable degradation of PLA and the mechanisms of therapeutic properties and cytotoxicity of ZnO. Following this, the paper highlights current research trends regarding the biomedical application of PLA-based ZnO nanocomposites. The final section of this review discusses the potential use of ZnO in tuning the degradation rate of PLA, and the possibility of manipulating the surface properties of ZnO nanoparticles and PLA/ZnO composites in order to optimize the therapeutic properties and safe usage of PLA/ZnO composites in the biomedical field.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.smmf.2022.100004

Cites

10 of 10 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 10 references

Research works printed but not linked: 203

  1. Claes, 2002, Development of new, biodegradable implants, Chirurg, 73, 990, 10.1007/s00104-002-0543-0 · DOI
  2. Pawar, 2014, Biomedical applications of poly(lactic acid), Recent Pat. Regen. Med., 4, 40
  3. Jamnongkan, 2022, A comprehensive evaluation of mechanical, thermal, and antibacterial properties of PLA/ZnO nanoflower biocomposite filaments for 3D printing application, Polymers, 14, 10.3390/polym14030600 · doi:10.3390/polym14030600
  4. Kim, 2019, Poly(Lactic Acid)/ZnO bionanocomposite films with positively charged ZnO as potential antimicrobial food packaging materials, Polymers, 11, 1427, 10.3390/polym11091427 · DOI · Paper page
  5. Laurenti, 2017, ZnO nanostructures for tissue engineering applications, Nanomaterials, 7, 374, 10.3390/nano7110374 · DOI
  6. Bajwa, 2021, Role of hybrid nano-zinc oxide and cellulose nanocrystals on the mechanical, thermal, and flammability properties of poly (lactic acid) polymer, J. Compos. Sci., 5, 43, 10.3390/jcs5020043 · DOI
  7. Kumar, 2020, ZnO nanoparticle-grafted PLA thermoplastic composites for 3D printing applications: tuning of thermal, mechanical, morphological and shape memory effect, J. Thermoplast. Compos. Mater., 35, 799, 10.1177/0892705720925119 · doi:10.1177/0892705720925119
  8. Pantani, 2013, PLA-ZnO nanocomposite films: water vapor barrier properties and specific end-use characteristics, Eur. Polym. J., 49, 3471, 10.1016/j.eurpolymj.2013.08.005 · DOI · Paper page
  9. Murariu, 2011, High-performance polylactide/ZnO nanocomposites designed for films and fibers with special end-use properties, Biomacromolecules, 12, 1762, 10.1021/bm2001445 · DOI · Paper page
  10. Singh, 2020, On 3D-printed ZnO-reinforced PLA matrix composite: tensile, thermal, morphological and shape memory characteristics, J. Thermoplast. Compos. Mater.
  11. Chong, 2021, Additive manufacturing of antibacterial PLA-ZnO nanocomposites: benefits, limitations and open challenges, J. Mater. Sci. Technol., 111, 120, 10.1016/j.jmst.2021.09.039 · DOI
  12. Brounstein, 2021, Development of antimicrobial PLA composites for fused filament fabrication, Polymers, 13, 580, 10.3390/polym13040580 · DOI
  13. Ventola, 2014, Medical applications for 3D Printing: current and projected uses, Pharm. Ther., 39, 704
  14. Chong, 2021, Current updates on the in vivo assessment of zinc oxide nanoparticles toxicity using animal models, Bionanoscience, 11, 590, 10.1007/s12668-021-00845-2 · DOI
  15. Kim, 2010, Alveolar epithelial cell injury due to zinc oxide nanoparticle exposure, Am. J. Respir. Crit. Care., 182, 10.1164/rccm.201002-0185OC · DOI
  16. Reddy, 2018, Evaluation of in vitro cytotoxicity of zinc oxide (ZnO) nanoparticles using human cell lines, J. Toxicol. Risk Assess., 4
  17. Jin, 2021, Toxicity of different zinc oxide nanomaterials and dose-dependent onset and development of Parkinson's disease-like symptoms induced by zinc oxide nanorods, Environ. Int., 146, 10.1016/j.envint.2020.106179 · DOI · Paper page
  18. Mittag, 2021, Cellular uptake and toxicological effects of differently sized zinc oxide nanoparticles in intestinal cells, Toxics, 9, 96, 10.3390/toxics9050096 · DOI
  19. Siddique, 2013, Preparation, characterization and antibacterial activity of ZnO nanoparticles on broad spectrum of microorganisms, Acta Chim. Slov., 60, 660
  20. Saif, 2019, Green synthesis of ZnO hierarchical microstructures by Cordia myxa and their antibacterial activity, Saudi J. Biol. Sci., 26, 1364, 10.1016/j.sjbs.2019.01.004 · doi:10.1016/j.sjbs.2019.01.004
  21. Liu, 2009, Antibacterial activities of zinc oxide nanoparticles against Escherichia coli O157:H7, J. Appl. Microbiol., 107, 1193, 10.1111/j.1365-2672.2009.04303.x · DOI · Paper page
  22. Iñiguez-Franco, 2018, Control of hydrolytic degradation of poly(lactic acid) by incorporation of chain extender: from bulk to surface erosion, Polym. Test., 67, 190, 10.1016/j.polymertesting.2018.02.028 · DOI
  23. Teixeira, 2021, Towards controlled degradation of poly(lactic) acid in technical applications, Chimia, 7, 42
  24. da Silva, 2018, Biocompatibility, biodegradation and excretion of polylactic acid (PLA) in medical implants and theranostic systems, Chem. Eng. J., 340, 9, 10.1016/j.cej.2018.01.010 · DOI · Paper page
  25. Agüero, 2019, Study of the influence of the reprocessing cycles on the final properties of polylactide pieces obtained by injection molding, Polymers, 11, 1908, 10.3390/polym11121908 · DOI
  26. Casalini, 2019, A perspective on polylactic acid-based polymers use for nanoparticles synthesis and applications, Front. Bioeng. Biotechnol., 7, 10.3389/fbioe.2019.00259 · DOI · Paper page
  27. Song, 2018, Current development of biodegradable polymeric materials for biomedical applications, Drug Des. Dev. Ther., 12, 3117, 10.2147/DDDT.S165440 · DOI · Paper page
  28. Shuai, 2021, Accelerated degradation of HAP/PLLA bone scaffold by PGA blending facilitates bioactivity and osteoconductivity, Bioact. Mater., 6, 490
  29. Shasteen, 2011, Controlling degradation rate of poly(lactic acid) for its biomedical applications, Biomed. Eng. Lett., 1, 163, 10.1007/s13534-011-0025-8 · DOI · Paper page
  30. González-Henríquez, 2019, Antimicrobial polymers for additive manufacturing, Int. J. Mol. Sci., 20, 10.3390/ijms20051210 · DOI
  31. Liu, 2020, Current applications of poly(lactic acid) composites in tissue engineering and drug delivery, Compos. B Eng., 199, 10.1016/j.compositesb.2020.108238 · DOI · Paper page
  32. Radwan-Pragłowska, 2020, Hybrid bilayer PLA/chitosan nanofibrous scaffolds doped with ZnO, Fe3O4, and Au nanoparticles with bioactive properties for skin tissue engineering, Polymers, 12, 159, 10.3390/polym12010159 · DOI
  33. Yeniay, 2019, Nanofibrous wound dressing material by electrospinning method, Int. J. Polym. Mater., 68, 11, 10.1080/00914037.2018.1525718 · doi:10.1080/00914037.2018.1525718
  34. Ranjbar-Mohammadi, 2021, Design and characterization of keratin/PVA-PLA nanofibers containing hybrids of nanofibrillated chitosan/ZnO nanoparticles, Int. J. Biol. Macromol., 187, 554, 10.1016/j.ijbiomac.2021.07.160 · DOI
  35. Khan, 2021, Exploration of the antibacterial and wound healing potential of a PLGA/silk fibroin based electrospun membrane loaded with zinc oxide nanoparticles, J. Mater. Chem. B., 9, 1452, 10.1039/D0TB02822C · DOI · Paper page
  36. Vannozzi, 2020, Novel ultrathin films based on a blend of PEG- b-PCL and PLLA and doped with ZnO nanoparticles, ACS Appl. Mater. Interfaces, 12, 21398, 10.1021/acsami.0c00154 · DOI
  37. Yuwono, 2019, The study of zinc oxide addition into hydroxyapatite/chitosan scaffold for bone tissue engineering application, AIP Conf. Proc., 2193, 10.1063/1.5139336 · doi:10.1063/1.5139336
  38. Augustine, 2014, Electrospun polycaprolactone/ZnO nanocomposite membranes as biomaterials with antibacterial and cell adhesion properties, J. Polym. Res., 21, 347, 10.1007/s10965-013-0347-6 · DOI · Paper page
  39. Khader, 2020, Biodegradable zinc oxide composite scaffolds promote osteochondral differentiation of mesenchymal stem cells, Biotechnol. Bioeng., 117, 194, 10.1002/bit.27173 · DOI
  40. O'Connor, 2020, Zinc as a therapeutic agent in bone regeneration, Materials, 13, 2211, 10.3390/ma13102211 · DOI · Paper page
  41. Salesa, 2021, Zinc chloride: time-dependent cytotoxicity, proliferation and promotion of glycoprotein synthesis and antioxidant gene expression in human keratinocytes, Biology, 10, 1072, 10.3390/biology10111072 · DOI
  42. Hadley, 2010, Dietary zinc reduces osteoclast resorption activities and increases markers of osteoblast differentiation, matrix maturation, and mineralization in the long bones of growing rats, J. Nutr. Biochem., 21, 297, 10.1016/j.jnutbio.2009.01.002 · DOI
  43. Hickory, 1979, Fetal skeletal malformations associated with moderate zinc deficiency during pregnancy, J. Nutr., 109, 883, 10.1093/jn/109.5.883 · doi:10.1093/jn/109.5.883
  44. Lansdown, 2007, Zinc in wound healing: theoretical, experimental, and clinical aspects, Wound Repair Regen., 15, 2, 10.1111/j.1524-475X.2006.00179.x · DOI · Paper page
  45. Livingstone, 2015, Zinc, Nutr. Clin. Pract., 30, 371, 10.1177/0884533615570376 · DOI · Paper page
  46. Tarnow, 1994, Topical zinc oxide treatment increases endogenous gene expression of insulin-like growth factor-1 in granulation tissue from porcine wounds, Scand. J. Plast. ReConstr. Surg. Hand Surg. Suppl., 28, 255, 10.3109/02844319409022008 · doi:10.3109/02844319409022008
  47. Hassan, 2021, Investigation of angiogenesis and wound healing potential mechanisms of zinc oxide nanorods, Front. Pharmacol., 12, 661217, 10.3389/fphar.2021.661217 · DOI
  48. Ahtzaz, 2017, A study on the effect of zinc oxide and zinc peroxide nanoparticles to enhance angiogenesis-pro-angiogenic grafts for tissue regeneration applications, Mater. Des, 132, 409, 10.1016/j.matdes.2017.07.023 · DOI
  49. Lee, 1999, Vascular endothelial cell adherens junction assembly and morphogenesis induced by Sphingosine-1-Phosphate, Cell, 99, 301, 10.1016/S0092-8674(00)81661-X · DOI · Paper page
  50. Zhou, 2013, Reactive oxygen species in vascular formation and development, Oxid. Med. Cell. Longev., 2013, 374963, 10.1155/2013/374963 · DOI
  51. Fukai, 2020, Cross-talk between NADPH oxidase and mitochondria: role in ROS signaling and angiogenesis, Cells, 9, 1849, 10.3390/cells9081849 · DOI · Paper page
  52. González-Pacheco, 2006, Mechanisms of endothelial response to oxidative aggression: protective role of autologous VEGF and induction of VEGFR2 by H2O2, Am. J. Physiol. Heart Circ. Physiol., 291, H1395, 10.1152/ajpheart.01277.2005 · DOI
  53. Augustine, 2014, Electrospun polycaprolactone membranes incorporated with ZnO nanoparticles as skin substitutes with enhanced fibroblast proliferation and wound healing, RSC Adv., 4, 24777, 10.1039/c4ra02450h · DOI · Paper page
  54. Chen, 2019, Electrical stimulation as a novel tool for regulating cell behavior in tissue engineering, Biomater. Res., 23, 25, 10.1186/s40824-019-0176-8 · DOI · Paper page
  55. Rajendran, 2021, Electrical stimulation to enhance wound healing, J. Funct. Biomater., 12, 40, 10.3390/jfb12020040 · DOI
  56. Dubé, 2010, Restoration of the transepithelial potential within tissue-engineered human skin in vitro and during the wound healing process in vivo, Tissue Eng., 16, 3055, 10.1089/ten.tea.2010.0030 · DOI
  57. Griffin, 2011, Electrical stimulation in bone healing: critical analysis by evaluating levels of evidence, Eplasty, 11, e34
  58. Kuzyk, 2009, The science of electrical stimulation therapy for fracture healing, Indian J. Orthop., 43, 127, 10.4103/0019-5413.50846 · DOI
  59. Ud-Din, 2014, Electrical stimulation and cutaneous wound healing: a review of clinical evidence, Healthc (Amst)., 2, 445, 10.3390/healthcare2040445 · DOI
  60. Careta, 2021, ZnO nanosheet-coated TiZrPdSiNb alloy as a piezoelectric hybrid material for self-stimulating orthopedic implants, Biomedicines, 9, 352, 10.3390/biomedicines9040352 · doi:10.3390/biomedicines9040352
  61. Murillo, 2017, Electromechanical nanogenerator–cell interaction modulates cell activity, Adv, 29
  62. Xie, 2011, Antibacterial activity and mechanism of action of zinc oxide nanoparticles against campylobacter jejuni, Appl. Environ. Microbiol., 77, 2325, 10.1128/AEM.02149-10 · DOI · Paper page
  63. Applerot, 2012, ZnO nanoparticle-coated surfaces inhibit bacterial biofilm formation and increase antibiotic susceptibility, RSC Adv., 2, 2314, 10.1039/c2ra00602b · DOI · Paper page
  64. Sirelkhatim, 2015, Review on zinc oxide nanoparticles: antibacterial activity and toxicity mechanism, Nano-Micro Lett., 7, 219, 10.1007/s40820-015-0040-x · DOI · Paper page
  65. Gudkov, 2021, A mini review of antibacterial properties of ZnO nanoparticles, Front. Physiol., 9
  66. Kim, 2014, Physicochemical properties of surface charge-modified ZnO nanoparticles with different particle sizes, Int. J. Nanomed., 9, 41
  67. Milkovic, 2019, Short overview of ROS as cell function regulators and their implications in therapy concepts, Cells, 8, 793, 10.3390/cells8080793 · DOI · Paper page
  68. Lipovsky, 2009, EPR study of visible light-induced ROS generation by nanoparticles of ZnO, J. Phys. Chem., 113, 15997, 10.1021/jp904864g · DOI · Paper page
  69. Jin, 2019, Photocatalytic antibacterial application of zinc oxide nanoparticles and self-assembled networks under dual UV irradiation for enhanced disinfection, Int. J. Nanomed., 2019, 1737, 10.2147/IJN.S192277 · DOI
  70. Lakshmi Prasanna, 2015, Insight into the mechanism of antibacterial activity of ZnO: surface defects mediated reactive oxygen species even in the dark, Langmuir, 31, 9155, 10.1021/acs.langmuir.5b02266 · DOI · Paper page
  71. Hara, 2017, Physiological roles of zinc transporters: molecular and genetic importance in zinc homeostasis, J. Physiol. Sci., 67, 283, 10.1007/s12576-017-0521-4 · DOI · Paper page
  72. Sugarman, 1983, Zinc and infection, Rev. Infect. Dis., 5, 137, 10.1093/clinids/5.1.137 · DOI · Paper page
  73. Pasquet, 2014, The contribution of zinc ions to the antimicrobial activity of zinc oxide, Colloids Surf. A Physicochem. Eng. Asp., 457, 263, 10.1016/j.colsurfa.2014.05.057 · DOI · Paper page
  74. Godoy-Gallardo, 2021, Antibacterial approaches in tissue engineering using metal ions and nanoparticles: from mechanisms to applications, Bioact. Mater., 6, 4470
  75. Singh, 2019, Zinc oxide nanoparticles impacts: cytotoxicity, genotoxicity, developmental toxicity, and neurotoxicity, Toxicol. Mech. Methods, 29, 300, 10.1080/15376516.2018.1553221 · DOI · Paper page
  76. Senapati, 2015, ZnO nanoparticles induced inflammatory response and genotoxicity in human blood cells: a mechanistic approach, Food Chem. Toxicol., 85, 61, 10.1016/j.fct.2015.06.018 · DOI
  77. Kononenko, 2017, Comparative in vitro genotoxicity study of ZnO nanoparticles, ZnO macroparticles and ZnCl2 to MDCK kidney cells: size matters, Toxicol. Vitro, 40, 256, 10.1016/j.tiv.2017.01.015 · DOI
  78. Sharma, 2012, Zinc oxide nanoparticles induce oxidative DNA damage and ROS-triggered mitochondria mediated apoptosis in human liver cells (HepG2), Apoptosis, 17, 852, 10.1007/s10495-012-0705-6 · DOI · Paper page
  79. Cardozo, 2019, Genotoxicity of zinc oxide nanoparticles: an in vivo and in silico study, Toxicol. Res., 8, 277, 10.1039/C8TX00255J · DOI
  80. Nam, 2013, No evidence of the genotoxic potential of gold, silver, zinc oxide and titanium dioxide nanoparticles in the SOS chromotest, J. Appl. Toxicol., 33, 1061, 10.1002/jat.2830 · DOI
  81. Scherzad, 2017, Molecular mechanisms of zinc oxide nanoparticle-induced genotoxicity short running title: genotoxicity of ZnO NPs, Materials, 10, 1427, 10.3390/ma10121427 · DOI
  82. Ray, 2009, Toxicity and environmental risks of nanomaterials: challenges and future needs, J. Environ. Sci. Health C Environ. Carcinog. Ecotoxicol. Rev., 27, 1, 10.1080/10590500802708267 · DOI · Paper page
  83. Martínez-Carmona, 2018, ZnO Nanostructures for drug delivery and theranostic applications, Nanomaterials, 8, 268, 10.3390/nano8040268 · DOI · Paper page
  84. Yin, 2015, Size-dependent cytotoxicity and genotoxicity of ZnO particles to human lymphoblastoid (WIL2-NS) cells, Environ. Mol. Mutagen., 56, 767, 10.1002/em.21962 · DOI
  85. Chen, 2019, Size-dependent cytotoxicity study of ZnO nanoparticles in HepG2 cells, Ecotoxicol, Environ. Saf., 171, 337, 10.1016/j.ecoenv.2018.12.096 · DOI
  86. Fu, 2014, Mechanisms of nanotoxicity: generation of reactive oxygen species, J. Food Drug Anal., 22, 64, 10.1016/j.jfda.2014.01.005 · DOI · Paper page
  87. Lin, 2009, Toxicity of nano- and micro-sized ZnO particles in human lung epithelial cells, J. Nanopart. Res., 11, 25, 10.1007/s11051-008-9419-7 · DOI · Paper page
  88. Sahu, 2016, In vitro cytotoxicity of nanoparticles: a comparison between particle size and cell type, J. Nanosci., 2016
  89. Baek, 2012, Pharmacokinetics, tissue distribution, and excretion of zinc oxide nanoparticles, Int. J. Nanomed., 7, 3081
  90. Monsé, 2018, Concentration-dependent systemic response after inhalation of nano-sized zinc oxide particles in human volunteers, Part, Fibre Toxicol, 15, 8, 10.1186/s12989-018-0246-4 · DOI
  91. Filipe, 2009, Stratum corneum is an effective barrier to TiO2 and ZnO nanoparticle percutaneous absorption, Skin Pharmacol. Physiol., 22, 266, 10.1159/000235554 · DOI · Paper page
  92. Monteiro-Riviere, 2011, Safety evaluation of sunscreen formulations containing titanium dioxide and zinc oxide nanoparticles in UVB sunburned skin: an in vitro and in vivo study, Toxicol. Sci., 123, 264, 10.1093/toxsci/kfr148 · DOI · Paper page
  93. Leite-Silva, 2013, The effect of formulation on the penetration of coated and uncoated zinc oxide nanoparticles into the viable epidermis of human skin in vivo, Eur. J. Pharm. Biopharm., 84, 297, 10.1016/j.ejpb.2013.01.020 · DOI
  94. Gulson, 2010, Small amounts of zinc from zinc oxide particles in sunscreens applied outdoors are absorbed through human skin, Toxicol. Sci., 118, 140, 10.1093/toxsci/kfq243 · DOI · Paper page
  95. Vandebriel, 2012, A review of mammalian toxicity of ZnO nanoparticles, Nanotechnol. Sci. Appl., 5, 61, 10.2147/NSA.S23932 · DOI · Paper page
  96. Samei, 2019, The impact of morphology and size of zinc oxide nanoparticles on its toxicity to the freshwater microalga, Raphidocelis subcapitata, Environ. Sci. Pol., 26, 2409, 10.1007/s11356-018-3787-z · DOI
  97. Vasile, 2015, Influence of the size and the morphology of ZnO nanoparticles on cell viability, C. R. Chim., 18, 1335, 10.1016/j.crci.2015.08.005 · doi:10.1016/j.crci.2015.08.005
  98. Wu, 2017, Assessment of the toxicity and inflammatory effects of different-sized zinc oxide nanoparticles in 2D and 3D cell cultures, RSC Adv., 7, 12437, 10.1039/C6RA27334C · DOI
  99. Pandurangan, 2014, Analysis of dose-dependent effect of zinc oxide nanoparticles on the oxidative stress and antioxidant enzyme activity in adipocytes, Appl. Biochem. Biotechnol., 174, 2851, 10.1007/s12010-014-1231-5 · DOI
  100. Ickrath, 2017, Time-dependent toxic and genotoxic effects of zinc oxide nanoparticles after long-term and repetitive exposure to human mesenchymal stem cells, Int. J. Environ. Res. Publ. Health, 14, 1590, 10.3390/ijerph14121590 · DOI
  101. Gnaneshwar, 2019, Ramification of zinc oxide doped hydroxyapatite biocomposites for the mineralization of osteoblasts, Mater. Sci. Eng. C, 96, 337, 10.1016/j.msec.2018.11.033 · DOI
  102. Goncharova, 2021, Structure and properties of biodegradable PLLA/ZnO composite membrane produced via electrospinning, Materials, 14, 10.3390/ma14010002 · DOI
  103. Kazemi-Pasarvi, 2020, Reducing cytotoxicity of poly (lactic acid)-based/zinc oxide nanocomposites while boosting their antibacterial activities by thymol for biomedical applications, Int. J. Biol. Macromol., 164, 4556, 10.1016/j.ijbiomac.2020.09.069 · DOI
  104. Mao, 2021, Construction of a multifunctional 3D nanofiber aerogel loaded with ZnO for wound healing, Colloids Surf. B Biointerfaces, 208, 10.1016/j.colsurfb.2021.112070 · DOI
  105. Molapour Rashedi, 2021, Novel PLA/ZnO nanofibrous nanocomposite loaded with tranexamic acid as an effective wound dressing: in vitro and in vivo assessment, Iran, J. Biotechnol., 19
  106. Molapour Rashedi, 2021, Nanocomposite-coated sterile cotton gas based on polylactic acid and nanoparticles (zinc oxide and copper oxide) and tranexamic acid drug with the aim of wound dressing, Regen. Eng. Transl. Med., 7, 200, 10.1007/s40883-021-00203-4 · DOI
  107. Mousa, 2018, A multifunctional zinc oxide/poly(lactic acid) nanocomposite layer coated on magnesium alloys for controlled degradation and antibacterial function, ACS Biomater. Sci. Eng., 4, 2169, 10.1021/acsbiomaterials.8b00277 · DOI
  108. Nonato, 2022, Nanocomposites of PLA/ZnO nanofibers for medical applications: antimicrobial effect, thermal, and mechanical behavior under cyclic stress, Polym. Eng. Sci., 62, 1147, 10.1002/pen.25913 · DOI
  109. Padilla-Gainza, 2020, Processing-structure-property relationships of biopolyester/zinc oxide fibrous scaffolds engineered by centrifugal spinning, Polym. Adv. Technol., 31, 2601, 10.1002/pat.4987 · DOI
  110. Rodríguez-Tobías, 2014, Novel antibacterial electrospun mats based on poly(D,L-lactide) nanofibers and zinc oxide nanoparticles, J. Mater. Sci., 49, 8373, 10.1007/s10853-014-8547-y · DOI
  111. H. Rodríguez-Tobías, G. Morales, D. Grande, Improvement of mechanical properties and antibacterial activity of electrospun poly(d,l-lactide)-based mats by incorporation of ZnO-graft-poly(d,l-lactide) nanoparticles, Mater. Chem. Phys. 182 (2026) 324-331. · DOI
  112. Şen Karaman, 2021, Bacteriostatic polylactic acid coatings enriched with zinc oxide and silica nanoparticles for titanium pedicle screws, JOM, 73, 4410, 10.1007/s11837-021-04922-5 · doi:10.1007/s11837-021-04922-5
  113. Xiang, 2017, Construction of poly(lactic-co-glycolic acid)/ZnO nanorods/Ag nanoparticles hybrid coating on Ti implants for enhanced antibacterial activity and biocompatibility, Mater. Sci. Eng. C, 79, 629, 10.1016/j.msec.2017.05.115 · DOI
  114. Vivcharenko, 2021, Modifications of wound dressings with bioactive agents to achieve improved pro-healing properties, Appl. Sci., 11, 4114, 10.3390/app11094114 · DOI
  115. Adeli, 2019, Wound dressing based on electrospun PVA/chitosan/starch nanofibrous mats: fabrication, antibacterial and cytocompatibility evaluation and in vitro healing assay, Int. J. Biol. Macromol., 122, 238, 10.1016/j.ijbiomac.2018.10.115 · DOI · Paper page
  116. Dabiri, 2016, Choosing a wound dressing based on common wound characteristics, Adv. Wound Care, 5, 32, 10.1089/wound.2014.0586 · DOI · Paper page
  117. Okan, 2007, The role of moisture balance in wound healing, Adv. Skin Wound Care, 20, 39, 10.1097/00129334-200701000-00013 · DOI · Paper page
  118. Rahman, 2018, Development of PLA/CS/ZnO nanocomposites and optimization its mechanical, thermal and water absorption properties, Polym. Test., 68, 302, 10.1016/j.polymertesting.2018.04.026 · doi:10.1016/j.polymertesting.2018.04.026
  119. Attinger, 2012, Clinically addressing biofilm in chronic wounds, Adv. Wound Care, 1, 127, 10.1089/wound.2011.0333 · DOI · Paper page
  120. Wolcott, 2010, Biofilm maturity studies indicate sharp debridement opens a time-dependent therapeutic window, J. Wound Care, 19, 320, 10.12968/jowc.2010.19.8.77709 · DOI · Paper page
  121. Paula, 2020, Dynamics of bacterial population growth in biofilms resemble spatial and structural aspects of urbanization, Nat. Commun., 11, 1354, 10.1038/s41467-020-15165-4 · DOI
  122. Nadar, 2022, Development of antibiofilm therapeutics strategies to overcome antimicrobial drug resistance, Microorgamnisms, 10, 303, 10.3390/microorganisms10020303 · DOI
  123. Rodríguez-Tobías, 2015, One-Pot formation of ZnO-graft-poly(D,L-lactide) hybrid systems via microwave-assisted polymerization of D,L-lactide in the presence of ZnO nanoparticles, Macromol. Chem. Phys., 216, 1629, 10.1002/macp.201500171 · DOI
  124. Salehi, 2018, Thymol, thyme, and other plant sources: health and potential uses, Phytother Res., 32, 1688, 10.1002/ptr.6109 · DOI · Paper page
  125. Shevchenko, 2010, A review of tissue-engineered skin bioconstructs available for skin reconstruction, J. R. Soc. Interface, 7, 229, 10.1098/rsif.2009.0403 · DOI · Paper page
  126. Vig, 2017, Advances in skin regeneration using tissue engineering, Int. J. Mol. Sci., 18, 789, 10.3390/ijms18040789 · DOI · Paper page
  127. Ho, 2017, Current advancements and strategies in tissue engineering for wound healing: a comprehensive review, Adv. Wound Care, 6, 191, 10.1089/wound.2016.0723 · DOI
  128. Rousselle, 2019, Re-epithelialization of adult skin wounds: cellular mechanisms and therapeutic strategies, Adv. Drug Deliv. Rev., 146, 344, 10.1016/j.addr.2018.06.019 · DOI · Paper page
  129. Da, 2017, Progress in development of bioderived materials for dermal wound healing, Regen. Biomater., 4, 325, 10.1093/rb/rbx025 · DOI
  130. Luzi, 2020, Novel nanocomposite PLA films with lignin/zinc oxide hybrids: design, characterization, interaction with mesenchymal stem cells, Nanomaterials, 10, 1, 10.3390/nano10112176 · doi:10.3390/nano10112176
  131. Martin-Piedra, 2019, Effective use of mesenchymal stem cells in human skin substitutes generated by tissue engineering, Eur. Cell. Mater., 37, 233, 10.22203/eCM.v037a14 · DOI
  132. DeMali, 2004, Vinculin – a dynamic regulator of cell adhesion, Trends Biochem. Sci., 29, 565, 10.1016/j.tibs.2004.09.001 · DOI
  133. Humphries, 2007, Vinculin controls focal adhesion formation by direct interactions with talin and actin, J. Cell Biol., 179, 1043, 10.1083/jcb.200703036 · DOI · Paper page
  134. Saberi, 2021, A comprehensive review on surface modifications of biodegradable magnesium-based implant alloy: polymer coatings opportunities and challenges, Coatings, 11, 747, 10.3390/coatings11070747 · DOI
  135. Parithimarkalaignan, 2013, Osseointegration: an update, J. Indian Prosthodont. Soc., 13, 2, 10.1007/s13191-013-0252-z · doi:10.1007/s13191-013-0252-z
  136. Raphel, 2016, Multifunctional coatings to simultaneously promote osseointegration and prevent infection of orthopaedic implants, Biomaterials, 84, 301, 10.1016/j.biomaterials.2016.01.016 · DOI · Paper page
  137. Prodana, 2021, Innovative coatings of metallic alloys used as bioactive surfaces in implantology: a review, Coatings, 11, 649, 10.3390/coatings11060649 · DOI
  138. Pankey, 2004, Clinical relevance of bacteriostatic versus bactericidal mechanisms of action in the treatment of gram-positive bacterial infections, Clin. Infect. Dis., 38, 864, 10.1086/381972 · DOI · Paper page
  139. Chapman, 2016, Skeletal muscle fibroblasts in health and disease, Differentiation, 92, 108, 10.1016/j.diff.2016.05.007 · DOI
  140. Li, 2021, Innovative surface modification procedures to achieve micro/nano-graded Ti-based biomedical alloys and implants, Coatings, 11, 647, 10.3390/coatings11060647 · DOI
  141. Applerot, 2009, Enhanced antibacterial activity of nanocrystalline ZnO due to increased ROS-mediated cell injury, Adv. Funct. Mater., 19, 842, 10.1002/adfm.200801081 · DOI · Paper page
  142. Baek, 2011, Microbial toxicity of metal oxide nanoparticles (CuO, NiO, ZnO, and Sb2O3) to Escherichia coli, Bacillus subtilis, and Streptococcus aureus, Sci. Total Environ., 409, 1603, 10.1016/j.scitotenv.2011.01.014 · DOI · Paper page
  143. Agarwal, 2015, Biomaterial strategies for engineering implants for enhanced osseointegration and bone repair, Adv. Drug Deliv. Rev., 94, 53, 10.1016/j.addr.2015.03.013 · DOI · Paper page
  144. Nauth, 2018, Critical-size bone defects: is there a consensus for diagnosis and treatment?, J. Orthop. Trauma, 32, S7, 10.1097/BOT.0000000000001115 · DOI · Paper page
  145. Amini, 2012, Bone tissue engineering: recent advances and challenges, Crit. Rev. Biomed. Eng., 40, 363, 10.1615/CritRevBiomedEng.v40.i5.10 · DOI · Paper page
  146. Porter, 2009, Bone tissue engineering: a review in bone biomimetics and drug delivery strategies, Biotechnol. Prog., 25, 1539, 10.1002/btpr.246 · DOI · Paper page
  147. Chopra, 2015, Alginate/gum acacia bipolymeric nanohydrogels—promising carrier for Zinc oxide nanoparticles, Int. J. Biol. Macromol., 72, 827, 10.1016/j.ijbiomac.2014.09.037 · DOI
  148. Raguvaran, 2017, Sodium alginate and gum acacia hydrogels of zinc oxide nanoparticles reduce hemolytic and oxidative stress inflicted by zinc oxide nanoparticles on mammalian cells, Int. J. Biol. Macromol., 101, 967, 10.1016/j.ijbiomac.2017.03.180 · DOI
  149. Raguvaran, 2017, Sodium alginate and gum acacia hydrogels of ZnO nanoparticles show wound healing effect on fibroblast cells, Int. J. Biol. Macromol., 96, 185, 10.1016/j.ijbiomac.2016.12.009 · DOI · Paper page
  150. Elmowafy, 2019, Biocompatibility, biodegradation and biomedical applications of poly(lactic acid)/poly(lactic-co-glycolic acid) micro and nanoparticles, J. Pharm. Investig., 49, 347, 10.1007/s40005-019-00439-x · DOI · Paper page
  151. Benali, 2015, Key factors for tuning hydrolytic degradation of polylactide/zinc oxide nanocomposites, Nanocomposites, 1, 51, 10.1179/2055033214Y.0000000007 · DOI
  152. Qu, 2014, Zinc oxide nanoparticles catalyze rapid hydrolysis of poly(lactic acid) at low temperatures, J. Appl. Polym. Sci., 131, 40287, 10.1002/app.40287 · DOI
  153. Anžlovar, 2018, Degradation of PLA/ZnO and PHBV/ZnO composites prepared by melt processing, Arab. J. Chem., 11, 343, 10.1016/j.arabjc.2017.07.001 · DOI
  154. Marra, 2017, Effect of TiO2 and ZnO on PLA degradation in various media, Adv. Mater. Sci. Eng., 2
  155. Restrepo, 2017, Development and characterization of polyvinyl alcohol stabilized polylactic acid/ZnO nanocomposites, Mater. Res. Express, 4, 10.1088/2053-1591/aa8b8d · DOI
  156. Murariu, 2015, Current progress in the production of PLA–ZnO nanocomposites: beneficial effects of chain extender addition on key properties, J. Appl. Polym. Sci., 132, 42480, 10.1002/app.42480 · DOI
  157. Rashidi, 2020, Tuning crystallization and hydrolytic degradation behaviors of poly(lactic acid) by using silver phosphate, zinc oxide and their nano-hybrids, Polym.-Plast. Technol. Mater., 59, 72
  158. Tajdari, 2020, Preparation and study on the optical, mechanical, and antibacterial properties of polylactic acid/ZnO/TiO2 shared nanocomposites, J. Plastic Film Sheeting, 36, 285, 10.1177/8756087919900365 · DOI
  159. Heydari-Majd, 2019, Kinetic release study of zinc from polylactic acid based nanocomposite into food simulants, Polym. Test., 76, 254, 10.1016/j.polymertesting.2019.03.040 · DOI
  160. Lu, 2021, Changes of thermal properties and microstructure of nano-ZnO/polylactic acid composite films during Zn migration, Packag. Technol. Sci., 34, 3, 10.1002/pts.2535 · doi:10.1002/pts.2535
  161. Trujillo, 2016, PLLA/ZnO nanocomposites: dynamic surfaces to harness cell differentiation, Colloids Surf. B Biointerfaces, 144, 152, 10.1016/j.colsurfb.2016.04.007 · DOI
  162. Virovska, 2014, Electrospinning/electrospraying vs. electrospinning: a comparative study on the design of poly(l-lactide)/zinc oxide non-woven textile, Appl. Surf. Sci., 311, 842, 10.1016/j.apsusc.2014.05.192 · DOI
  163. Punnoose, 2014, Cytotoxicity of ZnO nanoparticles can be tailored by modifying their surface structure: a green chemistry approach for safer nanomaterials, ACS Sustain. Chem. Eng., 2, 1666, 10.1021/sc500140x · DOI · Paper page
  164. Luo, 2014, Reducing ZnO nanoparticle cytotoxicity by surface modification, Nanoscale, 6, 5791, 10.1039/C4NR00458B · DOI
  165. Heydari, 2021, Facile method to covalently-jointed ZnO-NPs with Chitosan by using GPTMS: a new strategy to decrease the cytotoxicity of ZnO-NPs, Mater. Technol., 1
  166. Kc, 2016, Enhanced preferential cytotoxicity through surface modification: synthesis, characterization and comparative in vitro evaluation of TritonX-100 modified and unmodified zinc oxide nanoparticles in human breast cancer cell (MDA-MB-231), Chem. Cent. J., 10, 16, 10.1186/s13065-016-0162-3 · DOI
  167. Thurber, 2012, Improving the selective cancer killing ability of ZnO nanoparticles using Fe doping, Nanotoxicology, 6, 440, 10.3109/17435390.2011.587031 · DOI
  168. Chia, 2016, Reducing ZnO nanoparticles toxicity through silica coating, Heliyon, 2, 10.1016/j.heliyon.2016.e00177 · DOI
  169. Esparza-González, 2016, Effects of different surface modifying agents on the cytotoxic and antimicrobial properties of ZnO nanoparticles, Toxicol. Vitro, 37, 134, 10.1016/j.tiv.2016.09.020 · DOI
  170. Zheng, 2021, Implication of surface properties, bacterial motility, and hydrodynamic conditions on bacterial surface sensing and their initial adhesion, Front. Bioeng. Biotechnol., 9, 10.3389/fbioe.2021.643722 · DOI · Paper page
  171. Ma, 2007, Surface modification and property analysis of biomedical polymers used for tissue engineering, Colloids Surf. B Biointerfaces, 60, 137, 10.1016/j.colsurfb.2007.06.019 · DOI · Paper page
  172. Silhavy, 2010, The bacterial cell envelope, Cold Spring Harbor Perspect. Biol., 2, a000414, 10.1101/cshperspect.a000414 · DOI · Paper page
  173. Ueshima, 2002, Manipulation of bacterial adhesion and proliferation by surface charges of electrically polarized hydroxyapatite, J. Biomed. Mater. Res., 60, 578, 10.1002/jbm.10113 · doi:10.1002/jbm.10113
  174. Rzhepishevska, 2013, The surface charge of anti-bacterial coatings alters motility and biofilm architecture, Biomater. Sci., 1, 589, 10.1039/c3bm00197k · DOI · Paper page
  175. Terada, 2012, The effect of surface charge property on Escherichia coli initial adhesion and subsequent biofilm formation, Biotechnol. Bioeng., 109, 1745, 10.1002/bit.24429 · DOI
  176. de Medeiros Dantas, 2016, Bacterial adhesion and surface roughness for different clinical techniques for acrylic polymethyl methacrylate, Int. J. Dent., 2016
  177. Yoda, 2014, Effect of surface roughness of biomaterials on Staphylococcus epidermidis adhesion, BMC Microbiol., 14, 234, 10.1186/s12866-014-0234-2 · DOI · Paper page
  178. Whitehead, 2006, The effect of surface topography on the retention of microorganisms, Food Bioprod. Process., 84, 253, 10.1205/fbp06035 · DOI · Paper page
  179. Damodaran, 2016, Bio-inspired strategies for designing antifouling biomaterials, Biomater. Res., 20, 18, 10.1186/s40824-016-0064-4 · DOI · Paper page
  180. Ensikat, 2011, Superhydrophobicity in perfection: the outstanding properties of the lotus leaf, Beilstein J. Nanotechnol., 2, 152, 10.3762/bjnano.2.19 · DOI · Paper page
  181. Jaggessar, 2017, Bio-mimicking nano and micro-structured surface fabrication for antibacterial properties in medical implants, J. Nanobiotechnol., 15, 64, 10.1186/s12951-017-0306-1 · DOI · Paper page
  182. Ivanova, 2012, Natural bactericidal surfaces: mechanical rupture of pseudomonas aeruginosa cells by cicada wings, Small, 8, 2489, 10.1002/smll.201200528 · DOI · Paper page
  183. Qian, 2004, Super-hydrophobic characteristics of butterfly wing surface, J. Bionic Eng., 1, 249
  184. Bandara, 2017, Bactericidal effects of natural nanotopography of dragonfly wing on escherichia coli, ACS Appl. Mater. Interfaces, 9, 6746, 10.1021/acsami.6b13666 · DOI · Paper page
  185. Watson, 2015, A gecko skin micro/nano structure – a low adhesion, superhydrophobic, anti-wetting, self-cleaning, biocompatible, antibacterial surface, Acta Biomater., 21, 109, 10.1016/j.actbio.2015.03.007 · DOI · Paper page
  186. Pu, 2016, Preparation, anti-biofouling and drag-reduction properties of a biomimetic shark skin surface, Biol. Open., 5, 389, 10.1242/bio.016899 · DOI
  187. Garg, 2017, Influence of nanotechnology and the role of nanostructures in biomimetic studies and their potential applications, Biomimetics, 2, 10.3390/biomimetics2020007 · DOI
  188. Nundy, 2020, Hydrophilic and superhydrophilic self-cleaning coatings by morphologically varying ZnO microstructures for photovoltaic and glazing applications, ACS Omega, 5, 1033, 10.1021/acsomega.9b02758 · doi:10.1021/acsomega.9b02758
  189. Li, 2022, Nanoparticles-stacked superhydrophilic coating supported synergistic antimicrobial ability for enhanced wound healing, Mater. Sci. Eng. C, 132, 10.1016/j.msec.2021.112535 · DOI
  190. Zhang, 2013, Superhydrophobic surfaces for the reduction of bacterial adhesion, RSC Adv., 3, 12003, 10.1039/c3ra40497h · DOI · Paper page
  191. Chien, 2020, Superhydrophilic coating with antibacterial and oil-repellent properties via NaIO4-triggered polydopamine/sulfobetaine methacrylate polymerization, Polymers, 12, 10.3390/polym12092008 · doi:10.3390/polym12092008
  192. Zhang, 2019, Self-cleaning of hydrophobic rough surfaces by coalescence-induced wetting transition, Langmuir, 35, 2431, 10.1021/acs.langmuir.8b03664 · doi:10.1021/acs.langmuir.8b03664
  193. Nishino, 1999, The lowest surface free energy based on −CF3 alignment, Langmuir, 15, 4321, 10.1021/la981727s · DOI · Paper page
  194. Metwally, 2019, Surface potential and charges impact on cell responses on biomaterials interfaces for medical applications, Mater. Sci. Eng. C, 104, 10.1016/j.msec.2019.109883 · DOI · Paper page
  195. Le, 2013, Engineering a biocompatible scaffold with either micrometre or nanometre scale surface topography for promoting protein adsorption and cellular response, Int. J. Biomater., 2013, 10.1155/2013/782549 · DOI
  196. Cai, 2020, Recent advance in surface modification for regulating cell adhesion and behaviors, Nanotechnol. Rev., 9, 971, 10.1515/ntrev-2020-0076 · DOI · Paper page
  197. Loh, 2013, Three-dimensional scaffolds for tissue engineering applications: role of porosity and pore size, Tissue Eng. B Rev., 19, 485, 10.1089/ten.teb.2012.0437 · DOI · Paper page
  198. Kim, 2012, Biomimetic scaffolds for tissue engineering, Adv. Funct. Mater., 22, 2446, 10.1002/adfm.201103083 · DOI · Paper page
  199. Iturriaga, 2021, Strategies to introduce topographical and structural cues in 3D-printed scaffolds and implications in tissue regeneration, Adv. NanoBiomed. Res., 1, 10.1002/anbr.202100068 · DOI
  200. Niemczyk-Soczynska, 2020, Hydrophilic surface functionalization of electrospun nanofibrous scaffolds in tissue engineering, Polymers, 12, 2636, 10.3390/polym12112636 · DOI · Paper page

200 of 203 shown

Cited by

See all 78

Metadata

Authors
Chong, W. J., Shen, S., Li, Y., Trinchi, A., Pejak Simunec, D., Kyratzis, I. (., Sola, A., & Wen, C.
Venue
Smart Materials in Manufacturing
Publisher
Elsevier BV
Published
2023
Volume
1
Pages
100004
ISSN
2772-8102
Cited by
78
References
10
Language
en
Licence
Funders
  • Commonwealth Scientific and Industrial Research Organisation
  • Australian Research Council (DP210101862)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Biodegradable PLA-ZnO nanocomposite biomaterials with antibacterial properties, tissue engineering viability, and enhanced biocompatibility. https://app.cochat.ai/papers/10.1016/j.smmf.2022.100004
The paper
Chong, W. J., Shen, S., Li, Y., Trinchi, A., Pejak Simunec, D., Kyratzis, I. (., Sola, A., & Wen, C. (2023). Biodegradable PLA-ZnO nanocomposite biomaterials with antibacterial properties, tissue engineering viability, and enhanced biocompatibility. Smart Materials in Manufacturing. https://doi.org/10.1016/j.smmf.2022.100004

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.