3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications
The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Abstract
The introduction of 3D bioprinting is expected to revolutionize the field of tissue engineering and regenerative medicine. The 3D bioprinter is able to dispense materials while moving in X, Y, and Z directions, which enables the engineering of complex structures from the bottom up. In this study, a bioink that combines the outstanding shear thinning properties of nanofibrillated cellulose (NFC) with the fast cross-linking ability of alginate was formulated for the 3D bioprinting of living soft tissue with cells. Printability was evaluated with concern to printer parameters and shape fidelity. The shear thinning behavior of the tested bioinks enabled printing of both 2D gridlike structures as well as 3D constructs. Furthermore, anatomically shaped cartilage structures, such as a human ear and sheep meniscus, were 3D printed using MRI and CT images as blueprints. Human chondrocytes bioprinted in the noncytotoxic, nanocellulose-based bioink exhibited a cell viability of 73% and 86% after 1 and 7 days of 3D culture, respectively. On the basis of these results, we can conclude that the nanocellulose-based bioink is a suitable hydrogel for 3D bioprinting with living cells. This study demonstrates the potential use of nanocellulose for 3D bioprinting of living tissues and organs.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [28]
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Alginate Hydrogels as Biomaterials
Augst, A. D., Kong, H. J., & Mooney, D. J. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600069 · Cited by 1,839
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Bacterial cellulose as a potential scaffold for tissue engineering of cartilage
Svensson, A., Nicklasson, E., Harrah, T., Panilaitis, B., Kaplan, D. L., Brittberg, M., & Gatenholm, P. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.049 · Cited by 1,026
Self-citationSurface engineering approaches to micropattern surfaces for cell-based assays
Falconnet, D., Csucs, G., Michelle Grandin, H., & Textor, M. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.024 · Cited by 944
Wågberg, L., Decher, G., Norgren, M., Lindström, T., Ankerfors, M., & Axnäs, K. (2008) · Langmuir · doi:10.1021/la702481v · Cited by 867
Research works printed but not linked: 1
- Wågberg L., 1987, Colloids Surf., 27, 163, 10.1016/0166-6622(87)80335-9 · doi:10.1016/0166-6622(87)80335-9 · Paper page
Cited by
Items 401–500 of 1,001
Lu, Y., Chen, Y., Wang, M., Shi, S., & Jing, J. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c00074 · Cited by 90
3D printed cellulose based product applications
Firmanda, A., Syamsu, K., Sari, Y. W., Cabral, J. D., Pletzer, D., Mahadik, B. P., Fisher, J. P., & Fahma, F. (2021) · Materials Chemistry Frontiers · doi:10.1039/d1qm00390a · Cited by 91
Sonaye, S. Y., Ertugral, E. G., Kothapalli, C. R., & Sikder, P. (2022) · Materials · doi:10.3390/ma15227945 · Cited by 93
Recent Trends in Three-Dimensional Bioinks Based on Alginate for Biomedical Applications
Pahlevanzadeh, F., Mokhtari, H., Bakhsheshi‐Rad, H. R., Emadi, R., Kharaziha, M., Valiani, A., Poursamar, S. A., Ismail, A. F., Ramakrishna, S., & Berto, F. (2020) · Materials · doi:10.3390/ma13183980 · Cited by 90
An Overview of Hydrogel-Based Bioinks for 3D Bioprinting of Soft Tissues
Das, S., & Basu, B. (2019) · Journal of the Indian Institute of Science · doi:10.1007/s41745-019-00129-5 · Cited by 90
“developed a bioprinted human ear, where human nasoseptal chondrocytes (hNC) were embedded within a nanomaterials-based bioink developed with nanofibrillated cellulose (NFC) and alginate.(109).”
Microphysiological Systems: Design, Fabrication, and Applications
Wang, K., Man, K., Liu, J., Liu, Y., Chen, Q., Zhou, Y., & Yang, Y. S. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01667 · Cited by 90
Development of hydroxyapatite reinforced alginate–chitosan based printable biomaterial-ink
Adhikari, J., Perwez, M. S., Das, A., & Saha, P. (2020) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2020.100630 · Cited by 95
Nyirjesy, S. C., Heller, M. A., von Windheim, N., Gingras, A., Kang, S. Y., Ozer, E. K., Agrawal, A., Old, M. O., Seim, N. B., Carrau, R. L., et al. (2022) · Oral Oncology · doi:10.1016/j.oraloncology.2022.105976 · Cited by 93
Two‐Phase Emulgels for Direct Ink Writing of Skin‐Bearing Architectures
Huan, S., Mattos, B. D., Ajdary, R., Xiang, W., Bai, L., & Rojas, O. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201902990 · Cited by 87
Pakutsah, K., & Aht‐Ong, D. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.12.172 · Cited by 89
Three-Dimensional Scaffolds for Bone Tissue Engineering
Chinnasami, H., Dey, M. K., & Devireddy, R. V. (2023) · Bioengineering · doi:10.3390/bioengineering10070759 · Cited by 89
Printing of Patterned, Engineered E. coli Biofilms with a Low-Cost 3D Printer
Schmieden, D. T., Vázquez, S. J. B., Sangüesa, H., van der Does, M., Idema, T., & Meyer, A. S. (2018) · ACS Synthetic Biology · doi:10.1021/acssynbio.7b00424 · Cited by 89
Mouse in vitro spermatogenesis on alginate-based 3D bioprinted scaffolds
Baert, Y., Komrsková, K., Margaryan, H., & Goossens, E. (2019) · Biofabrication · doi:10.1088/1758-5090/ab1452 · Cited by 89
Lignin‐Based Direct Ink Printed Structural Scaffolds
Jiang, B., Yao, Y., Liang, Z., Gao, J., Chen, G., Xia, Q., Mi, R., Jiao, M., Wang, X., & Hu, L. (2020) · Small · doi:10.1002/smll.201907212 · Cited by 85
Aspiration-assisted bioprinting of the osteochondral interface
Ayan, B., Wu, Y. B., Karuppagounder, V., Kamal, F., & Ozbolat, I. T. (2020) · Scientific Reports · doi:10.1038/s41598-020-69960-6 · Cited by 89
Chen, J., Chen, J., Wang, H., He, L., Huang, B., Dadbakhsh, S., & Bártolo, P. (2024) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ad88e3 · Cited by 109
“…utilizing this [117] with permission from the Royal Society of Chemistry. bioink has showcased higher cell density in both the outer and inner regions of the structure (figure 12(a)), accompanied by the presence of collagen and proteoglycans, indicative of ECM secretion and chondrogenesis [18].”
Three-Dimensional Bioprinting of Articular Cartilage: A Systematic Review
Wu, Y. B., Kennedy, P., Bonazza, N. A., Yu, Y., Dhawan, A., & Ozbolat, I. T. (2018) · Cartilage · doi:10.1177/1947603518809410 · Cited by 88
“To exploit the cellulose in terms of mechanical strength and rheology, Markstedt et al.(20) evaluated the printability and cytotoxicity of nanofibrillated cellulose (NFC) and alginate bioink (Fig.”
BackgroundMethodInfluentialRheological properties of cellulose nanofiber hydrogel for high-fidelity 3D printing
Shin, S., & Hyun, J. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117976 · Cited by 84
Ma, Y., Li, X., Yang, B., & Tian, W. (2018) · Biotechnology and Bioengineering · doi:10.1002/bit.26882 · Cited by 86
“Additionally, DIW systems have been used to fabricate multiple functional tissues, including aortic valves, branched vascular trees, liver, cartilage, neural tissue constructs, and in vitro tumor models (R. Chang, Nam, & Sun, 2008; Duan, Hockaday, Kang, & Butcher, 2013; Faulkner et al., 2015; Hsieh, Lin, & Hsu, 2015;…”
MethodLu, C., Wang, C., Yu, J., Wang, J., & Chu, F. (2019) · ChemSusChem · doi:10.1002/cssc.201902191 · Cited by 83
Ji, Q., Zhou, C., Li, Z., Boateng, I. D., & Liu, X. (2023) · Industrial Crops and Products · doi:10.1016/j.indcrop.2023.117093 · Cited by 83
Additive Manufacturing of Vascular Grafts and Vascularized Tissue Constructs
Elomaa, L., & Yang, Y. (2017) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2016.0348 · Cited by 86
“The shear-thinning behavior has been observed with supramolecular polymers that form reversible polymer entanglements through noncovalent interactions(139) and with materials containing a small number of nanoparticles.(141,142) However, the high costs of nanoparticles and their tendency to agglomerate limit their use…”
BackgroundCytocompatibility of Wood-Derived Cellulose Nanofibril Hydrogels with Different Surface Chemistry
Rashad, A., Mustafa, K., Heggset, E. B., & Syverud, K. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.6b01911 · Cited by 90
Kandhola, G., Park, S., Lim, J., Chivers, C., Song, Y. H., Chung, J. H., Kim, J., & Kim, J.-W. (2023) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-023-00530-3 · Cited by 83
Shahbazi, M., Jäger, H., Ettelaie, R., Chen, J., Kashi, P. A., & Mohammadi, A. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103285 · Cited by 84
Natural and synthetic polymeric hydrogel: A bioink for 3D bioprinting of tissue models
Bramhe, P., Rarokar, N. R., Kumbhalkar, R., Saoji, S. D., & Khedekar, P. B. (2024) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2024.106204 · Cited by 88
Three-Dimensional Printing of Tissue/Organ Analogues Containing Living Cells
Park, J., Jang, J., Lee, J., & Cho, D. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1611-9 · Cited by 88
Shape fidelity and structure of 3D printed high consistency nanocellulose
Klar, V., Pere, J., Turpeinen, T., Kärki, P., Orelma, H., & Kuosmanen, P. (2019) · Scientific Reports · doi:10.1038/s41598-019-40469-x · Cited by 84
Bioink design for extrusion-based bioprinting
Zhang, T., Zhao, W., Xiahou, Z., Wang, X., Zhang, K., & Yin, J. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101227 · Cited by 88
Park, J. Y., Choi, Y., Shim, J., Park, J., & Cho, D. (2016) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33639 · Cited by 84
Rossi, S., Porta, R., Brenna, D., Puglisi, A., & Benaglia, M. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201612192 · Cited by 80
Wang, G., Cao, X., Dong, H., Zeng, L., Yu, C., & Chen, X. (2018) · Polymers · doi:10.3390/polym10090949 · Cited by 79
Tavafoghi, M., Darabi, M. A., Mahmoodi, M., Tutar, R., Xu, C., Mirjafari, A., Billi, F., Święszkowski, W., Nasrollahi, F., Ahadian, S., et al. (2021) · Biofabrication · doi:10.1088/1758-5090/ac0b9a · Cited by 85
Li, Y., Huang, L., Tai, G., Yan, F., Cai, L., Xin, C., & Islam, S. A. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106672 · Cited by 80
Nanomaterials-incorporated hydrogels for 3D bioprinting technology
Yoon, J., Han, H., & Jang, J. (2023) · Nano Convergence · doi:10.1186/s40580-023-00402-5 · Cited by 87
Bhattacharyya, A., Janarthanan, G., & Noh, I. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101639 · Cited by 92
Microalgal nanocellulose – opportunities for a circular bioeconomy
Ross, I. L., Shah, S., Hankamer, B. D., & Amiralian, N. (2021) · Trends in Plant Science · doi:10.1016/j.tplants.2021.05.004 · Cited by 81
Techniques in scaffold fabrication process for tissue engineering applications: A review
Kumar, A., & Jacob, A. (2022) · Journal of Applied Biology & Biotechnology · doi:10.7324/jabb.2022.100321 · Cited by 84
Chand, R., Muhire, B. S., & Vijayavenkataraman, S. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i2.545 · Cited by 79
“In addition, Markstedt et al.[18] used a linear PTT model in IPS IBOFlow, whereas Emmermacher et al.[9] used a model based on Herschel-Bulkley law to simulate the fluid flow inside the nozzle.”
MethodA review: polysaccharide-based hydrogels and their biomedical applications
Sharma, S., Bhende, M. S., & Goel, A. (2024) · Polymer Bulletin · doi:10.1007/s00289-023-05130-8 · Cited by 81
ECM Based Bioink for Tissue Mimetic 3D Bioprinting
Nam, S. Y., & Park, S. (2018) · Advances in experimental medicine and biology · doi:10.1007/978-981-13-0445-3_20 · Cited by 83
Lafuente‐Merchan, M., Ruíz, S., Espona‐Noguera, A., Gálvez‐Martín, P., López‐Ruiz, E., Marchal, J. A., López-Donaire, M. L., Zabala, A., Ciriza, J., Saenz-del-Burgo, L., et al. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112160 · Cited by 85
3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels
Erkoc, P., Uvak, I., Nazeer, M. A., Batool, S. R., Odeh, Y. N., Akdoğan, O., & Kızılel, S. (2020) · Macromolecular Bioscience · doi:10.1002/mabi.202000106 · Cited by 82
Doroteo, M. C., Mandujano-Tinoco, E. A., & Krötzsch, E. (2020) · Biochimica et Biophysica Acta (BBA) - General Subjects · doi:10.1016/j.bbagen.2020.129782 · Cited by 79
Candidate Bioinks for Extrusion 3D Bioprinting—A Systematic Review of the Literature
Tarassoli, S. P., Jessop, Z. M., Jovic, T. H., Hawkins, K. M., & Whitaker, I. S. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.616753 · Cited by 84
“, 2021) as well as novel natural bioinks such as nanocellulose (Markstedt et al., 2015; Kyle et al., 2018; Jessop et al., 2019).”
BackgroundNanocomposite Bioprinting for Tissue Engineering Applications
Loukelis, K., Helal, Z. A., Mikos, A. G., & Chatzinikolaidou, Μ. (2023) · Gels · doi:10.3390/gels9020103 · Cited by 83
Hu, X., Zhang, Z., Wu, H., Yang, S., Zhao, W., Che, L., Wang, Y., Cao, J., Li, K., & Qian, Z. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2023.213501 · Cited by 84
Advanced Polymers for Three-Dimensional (3D) Organ Bioprinting
Wang, X. (2019) · Micromachines · doi:10.3390/mi10120814 · Cited by 86
“For example, Markstedt and coworkers blended alginate hydrogel with collagen and nanofibrillated cellulose to effectively enhance extrusion-based 3D printing resolution from 1000 to 400–600 μm using a proper diameter nozzle [90].”
MethodZhang, J., Wehrle, E., Vetsch, J. R., Paul, G. R., Rubert, M., & Müller, R. (2019) · Biomedical Materials · doi:10.1088/1748-605x/ab3c74 · Cited by 79
Key parameters and applications of extrusion-based bioprinting
Tian, S., Zhao, H., & Lewinski, N. A. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00156 · Cited by 83
Wang, C., Bai, J., Tian, P., Xie, R. H., Duan, Z., Lv, Q., & Tao, Y. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.732513 · Cited by 79
Recent advances in bioprinting using silk protein-based bioinks
Chakraborty, J., Mu, X., Pramanick, A., Kaplan, D. L., & Ghosh, S. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121672 · Cited by 78
Lin, L., Jiang, S., Yang, J., Qiu, J., Jiao, X., Yue, X., Ke, X., Yang, G., & Zhang, L. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v9i1.637 · Cited by 75
“prepared NFC-Alg bio-ink for cartilage TE[14] with high print resolution and fidelity, which combines the rheological characteristics of NFC with the crosslinking capabilities of Alg.”
Applications of 3D printing in medicine: A review
Dong, C., Petrovic, M., & Davies, I. J. (2024) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2024.100149 · Cited by 84
Sulfated Alginates as Heparin Analogues: A Review of Chemical and Functional Properties
Arlov, Ø., & Skjåk‐Bræk, G. (2017) · Molecules · doi:10.3390/molecules22050778 · Cited by 82
“Alginate has been evaluated for numerous biomedical applications, primarily due to their gentle gelling conditions, including immunoisolation of cell transplants [38], slow-release systems [39], in vitro tissue engineering [40], and 3D-bioprinting [41].”
BackgroundApelgren, P., Karabulut, E., Amoroso, M., Mantas, A., Ávila, H. M., Kölby, L., Kondo, T., Toríz, G., & Gatenholm, P. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00157 · Cited by 77
Self-citationSilk fibroin nanofibers: a promising ink additive for extrusion three-dimensional bioprinting
Sakai, S., Yoshii, A., Sakurai, S., Horii, K., & Nagasuna, O. (2020) · Materials Today Bio · doi:10.1016/j.mtbio.2020.100078 · Cited by 75
Susapto, H. H., Alhattab, D. M., Abdelrahman, S., Khan, Z. N., Alshehri, S., Kahin, K., Ge, R., Moretti, M., Emwas, A.-H. M., & Hauser, C. A. E. (2021) · Nano Letters · doi:10.1021/acs.nanolett.0c04426 · Cited by 79
Recent progress in surgical adhesives for biomedical applications
Zheng, K., Gu, Q., Zhou, D., Zhou, M., & Zhang, L. (2021) · Smart Materials in Medicine · doi:10.1016/j.smaim.2021.11.004 · Cited by 84
3D bioprinting of cell-laden hydrogels for advanced tissue engineering
Blaeser, A., Campos, D. F. D., & Fischer, H. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.04.003 · Cited by 77
Osorio, M., Cañas, A. I., Puerta-Arias, J. D., Díaz, L., Naranjo, T. W., Ortiz, I. C., & Castro, C. I. (2019) · Scientific Reports · doi:10.1038/s41598-019-46918-x · Cited by 78
Huang, L. Q., Yuan, W., Hong, Y., Fan, S., Yao, X., Ren, T., Song, L., Yang, G., & Zhang, Y. (2020) · Cellulose · doi:10.1007/s10570-020-03526-7 · Cited by 79
3D Bioprinting and its application to organ-on-a-chip
Park, J. Y., Jang, J., & Kang, H. (2018) · Microelectronic Engineering · doi:10.1016/j.mee.2018.08.004 · Cited by 79
Recent Advancements in 3D Printing of Polysaccharide Hydrogels in Cartilage Tissue Engineering
Naranđa, J., Bračič, M., Vogrin, M., & Maver, U. (2021) · Materials · doi:10.3390/ma14143977 · Cited by 74
Meniscus regeneration by 3D printing technologies: Current advances and future perspectives
Stocco, E., Porzionato, A., Rose, E. D., Barbon, S., De, R., & Macchi, V. (2022) · Journal of Tissue Engineering · doi:10.1177/20417314211065860 · Cited by 78
Eco-friendly nanocellulose and its biomedical applications: current status and future prospect
Nehra, P., & Chauhan, R. P. (2020) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2020.1817706 · Cited by 74
3D Printing of Green and Renewable Polymeric Materials: Toward Greener Additive Manufacturing
Guggenbiller, G., Brooks, S. L., King, O., Constant, E., Merckle, D., & Weems, A. C. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c02171 · Cited by 73
3D Printing of Polysaccharide-Based Hydrogel Scaffolds for Tissue Engineering Applications: A Review
Tamo, A. K., Djouonkep, L. D. W., & Selabi, N. B. S. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.132123 · Cited by 77
Sun, X., & Jiang, F. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122305 · Cited by 83
Functional nanostructures for enzyme based biosensors: properties, fabrication and applications
Othman, A. A., Karimi, A., & Andreescu, S. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb02009g · Cited by 76
Matrix-Assisted Three-Dimensional Printing of Cellulose Nanofibers for Paper Microfluidics
Shin, S., & Hyun, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07609 · Cited by 74
A Brief Review of Nanocellulose Based Hybrid Membranes for CO2 Separation
Dai, Z., Ottesen, V., Deng, J., Helberg, R. M. L., & Deng, L. (2019) · Fibers · doi:10.3390/fib7050040 · Cited by 72
Siripongpreda, T., Hoven, V. P., Narupai, B., & Rodthongkum, N. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111806 · Cited by 74
3D printing for clinical application in otorhinolaryngology
Zhong, N., & Zhao, X. (2017) · European Archives of Oto-Rhino-Laryngology · doi:10.1007/s00405-017-4743-0 · Cited by 72
A Comprehensive Review of Stem Cells for Cartilage Regeneration in Osteoarthritis
Gauthaman, K., Memić, A., Budd, E., Abbas, M. M., & Mobasheri, A. (2018) · Advances in experimental medicine and biology · doi:10.1007/5584_2018_205 · Cited by 80
Mohan, T., Štiglic, A. D., Beaumont, M., Konnerth, J., Gürer, F., Makuc, D., Maver, U., Gradišnik, L., Plavec, J., Kargl, R., et al. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.9b01099 · Cited by 73
3D bioprinting of cell-laden constructs for regenerative medicine
Li, C., & Cui, W. (2021) · Engineered Regeneration · doi:10.1016/j.engreg.2021.11.005 · Cited by 70
3D printable carboxylated cellulose nanocrystal-reinforced hydrogel inks for tissue engineering
Kumar, A., Matari, I. A. I., & Han, S. S. (2020) · Biofabrication · doi:10.1088/1758-5090/ab736e · Cited by 73
3D bioprinting of dual-crosslinked nanocellulose hydrogels for tissue engineering applications
Monfared, M., Mawad, D., Rnjak‐Kovacina, J., & Stenzel, M. H. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb00624j · Cited by 70
Ghanbari, M., Sadjadinia, A., Zahmatkesh, N., Mohandes, F., Dolatyar, B., Zeynali, B., & Salavati‐Niasari, M. (2022) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107562 · Cited by 71
Enabling direct ink write edible 3D printing of food purees with cellulose nanocrystals
Armstrong, C. D., Yue, L., Deng, Y., & Qi, H. J. (2022) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2022.111086 · Cited by 71
Li, X., Zheng, F., Wang, X., Geng, X., Zhao, S., Liu, H., Dou, D., Leng, Y., Wang, L., & Yubo, F. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v9i2.649 · Cited by 84
Recent advances and applications of artificial intelligence in 3D bioprinting
Chen, H., Zhang, B., & Huang, J. (2024) · Biophysics Reviews · doi:10.1063/5.0190208 · Cited by 83
Yeo, M., & Kim, G. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115041 · Cited by 70
Introduction to the state-of-the-art 3D bioprinting methods, design, and applications in orthopedics
Semba, J. A., Mieloch, A. A., & Rybka, J. D. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00070 · Cited by 75
Wang, Y., Wei, Q., Wei, Q., Wang, Y., Zhang, J., Guo, Y., & Saroia, J. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-04353-8 · Cited by 70
Recent Advances in Porous 3D Cellulose Aerogels for Tissue Engineering Applications: A Review
Mirtaghavi, A., Luo, J., & Muthuraj, R. (2020) · Journal of Composites Science · doi:10.3390/jcs4040152 · Cited by 72
Maniţă, P. G., García-Orue, I., Santos‐Vizcaíno, E., Hernández, R. M., & Igartúa, M. (2020) · Pharmaceuticals · doi:10.3390/ph14040362 · Cited by 79
Bakhtiari, S. S. E., Bakhsheshi‐Rad, H. R., Karbasi, S., Razzaghi, M., Tavakoli, M., Ismail, A. F., Sharif, S., Ramakrishna, S., Chen, D., & Berto, F. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100477 · Cited by 70
Three‐dimensional printing technologies for terahertz applications: A review
Sun, J., & Hu, F. (2019) · International Journal of RF and Microwave Computer-Aided Engineering · doi:10.1002/mmce.21983 · Cited by 71
3D Bioprinting: New Directions in Articular Cartilage Tissue Engineering
O’Connell, G. D., Garcia, J., & Amir, J. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00587 · Cited by 72
Pedrotty, D. M., Kuzmenko, V., Karabulut, E., Sugrue, A. M., Livia, C., Vaidya, V. R., McLeod, C. J., Asirvatham, S. J., Gatenholm, P., & Kapa, S. (2019) · Circulation Arrhythmia and Electrophysiology · doi:10.1161/circep.118.006920 · Cited by 68
Self-citationStem Cell-Laden Hydrogel-Based 3D Bioprinting for Bone and Cartilage Tissue Engineering
Yang, Z., Yi, P., Liu, Z., Zhang, W., Mei, L., Feng, C., Tu, C., & Li, Z. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.865770 · Cited by 78
Tenhunen, T.-M., Moslemian, O., Kammiovirta, K., Harlin, A., Kääriäinen, P., Österberg, M., Tammelin, T., & Orelma, H. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.12.012 · Cited by 74
“The previous reports include studies on cellulose dissolved in an ionic liquid and nanocellulose based ink for biomedical applications [18,19].”
BackgroundA Methylcellulose Hydrogel as Support for 3D Plotting of Complex Shaped Calcium Phosphate Scaffolds
Ahlfeld, T., Köhler, T., Czichy, C., Lode, A., & Gelinsky, M. (2018) · Gels · doi:10.3390/gels4030068 · Cited by 69
Facile fabrication of sulfated alginate electrospun nanofibers
Daemi, H., Mashayekhi, M., & Pezeshki‐Modaress, M. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.06.105 · Cited by 66
Pelegrini, B. L., Ré, F., de Oliveira, M. M., Fernandes, T., de Oliveira, J. H., de Oliveira, A. G., Girotto, E. M., Nakamura, C. V., Sampaio, A. R., Valim, A., et al. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201900092 · Cited by 68
Jang, C. H., Koo, Y., & Kim, G. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116776 · Cited by 65
Correia, C. R., Nadine, S., & Mano, J. F. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201908061 · Cited by 67
Nanofibrillated cellulose/gellan gum hydrogel-based bioinks for 3D bioprinting of skin cells
Lameirinhas, N. S., Teixeira, M. C., Carvalho, J. P. F., Valente, B. F. A., Pinto, R. J. B., Oliveira, H., Luís, J. L., Pires, L. S. O., Oliveira, J. M., Vilela, C., et al. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.12.227 · Cited by 65
Metadata
- Authors
- Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P.
- Affiliations
- Wallenberg Wood Science Center (SE)
- Wallenberg Wood Science Center and ‡Biopolymer Technology, Department of Chemical and Biological Engineering, Chalmers University of Technology, Gothenburg 412 96, Sweden
- Corresponding author
- Gatenholm, Paul
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-04-07
- Volume
- 16
- Issue
- 5
- Pages
- 1489-1496
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1994903148
- Cited by
- 1,528
- References
- 39
- Citations by year
- 2026: 64 · 2025: 90 · 2024: 116 · 2023: 151 · 2022: 198 · 2021: 204 · 2020: 198 · 2019: 177 · 2018: 147 · 2017: 99 · 2016: 73 · 2015: 9
- FWCI
- 54.39
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Chalmers Research (Chalmers University of Technology) (submittedVersion)
- Funders
- European Commission
- VINNOVA
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- 3D bioprinting, human chondrocytes, cartilage tissue engineering, nanocellulose, alginate, bioinks, cellulose nanofibers, shear thinning, hydrogels, meniscus, auricular cartilage, cell viability, shape fidelity
- MeSH terms
- Alginates, Animals, Cartilage, Cellulose, Hexuronic Acids, Humans, Chondrocytes, Hydrogel, Polyethylene Glycol Dimethacrylate, Glucuronic Acid, Tissue Engineering, Regenerative Medicine, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.