3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications
The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Abstract
The introduction of 3D bioprinting is expected to revolutionize the field of tissue engineering and regenerative medicine. The 3D bioprinter is able to dispense materials while moving in X, Y, and Z directions, which enables the engineering of complex structures from the bottom up. In this study, a bioink that combines the outstanding shear thinning properties of nanofibrillated cellulose (NFC) with the fast cross-linking ability of alginate was formulated for the 3D bioprinting of living soft tissue with cells. Printability was evaluated with concern to printer parameters and shape fidelity. The shear thinning behavior of the tested bioinks enabled printing of both 2D gridlike structures as well as 3D constructs. Furthermore, anatomically shaped cartilage structures, such as a human ear and sheep meniscus, were 3D printed using MRI and CT images as blueprints. Human chondrocytes bioprinted in the noncytotoxic, nanocellulose-based bioink exhibited a cell viability of 73% and 86% after 1 and 7 days of 3D culture, respectively. On the basis of these results, we can conclude that the nanocellulose-based bioink is a suitable hydrogel for 3D bioprinting with living cells. This study demonstrates the potential use of nanocellulose for 3D bioprinting of living tissues and organs.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [28]
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Alginate Hydrogels as Biomaterials
Augst, A. D., Kong, H. J., & Mooney, D. J. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600069 · Cited by 1,839
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Bacterial cellulose as a potential scaffold for tissue engineering of cartilage
Svensson, A., Nicklasson, E., Harrah, T., Panilaitis, B., Kaplan, D. L., Brittberg, M., & Gatenholm, P. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.049 · Cited by 1,026
Self-citationSurface engineering approaches to micropattern surfaces for cell-based assays
Falconnet, D., Csucs, G., Michelle Grandin, H., & Textor, M. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.024 · Cited by 944
Wågberg, L., Decher, G., Norgren, M., Lindström, T., Ankerfors, M., & Axnäs, K. (2008) · Langmuir · doi:10.1021/la702481v · Cited by 867
Research works printed but not linked: 1
- Wågberg L., 1987, Colloids Surf., 27, 163, 10.1016/0166-6622(87)80335-9 · doi:10.1016/0166-6622(87)80335-9 · Paper page
Cited by
Items 801–900 of 1,001
Hu, M. Y., Dailamy, A., Lei, X. Y., Parekh, U., McDonald, D., Kumar, A., & Mali, P. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800845 · Cited by 29
Zineh, B. R., Shabgard, M. R., & Roshangar, L. (2018) · Advanced Pharmaceutical Bulletin · doi:10.15171/apb.2018.073 · Cited by 28
“AL changes to a stable hydrogel through ionic interaction between carboxyl groups of alginate and Ca.(7,8) Biocompatibility of AL and its controllable viscosity improve its applications in scaffolding and bioprinting.”
Background3D Printed Porous Cellulose Nanocomposite Hydrogel Scaffolds
Sultan, S., & Mathew, A. P. (2019) · Journal of Visualized Experiments · doi:10.3791/59401 · Cited by 28
Stanco, D., Boffito, M., Bogni, A., Puricelli, L., Josefa, B., Soldati, G., & Ciardelli, G. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21228694 · Cited by 28
Modern Porous Polymer Implants: Synthesis, Properties, and Application
Kovylin, R. S., Aleynik, D. Y., & Fedushkin, I. L. (2021) · Polymer Science Series C · doi:10.1134/s1811238221010033 · Cited by 29
Digital micro-mirror device -based light curing technology and its biological applications
Wang, Z., Yang, W., Qin, Y., Liang, W., Yu, H., & Liu, L. (2021) · Optics & Laser Technology · doi:10.1016/j.optlastec.2021.107344 · Cited by 28
3D printing with particles as feedstock materials
Zhang, J., Amini, N., Morton, D. A. V., & Hapgood, K. (2021) · Advanced Powder Technology · doi:10.1016/j.apt.2021.07.022 · Cited by 28
Characterization of κ‐carrageenan/methylcellulose/cellulose nanocrystal hydrogels for 3D bioprinting
Boonlai, W., Tantishaiyakul, V., & Hirun, N. (2021) · Polymer International · doi:10.1002/pi.6298 · Cited by 28
Köpf, M., Nasehi, R., Kreimendahl, F., Jockenhoevel, S., & Fischer, H. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i4.606 · Cited by 31
Microscale 3D Printing and Tuning of Cellulose Nanocrystals Reinforced Polymer Nanocomposites
Groetsch, A., Stelzl, S., Nagel, Y., Kochetkova, T., Scherrer, N. C., Ovsianikov, A., Michler, J., Pethő, L., Siqueira, G. D. F., Nyström, G., et al. (2022) · Small · doi:10.1002/smll.202202470 · Cited by 28
Baei, P., Daemi, H., Aramesh, F., Baharvand, H., & Eslaminejad, M. B. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.120650 · Cited by 28
Cheng, K.-C., Sun, Y., & Hsu, S. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb00120b · Cited by 28
Valizadeh, I., Tayyarian, T., & Weeger, O. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103641 · Cited by 36
Building gut from scratch — progress and update of intestinal tissue engineering
Tullie, L., Jones, B. C., De Coppi, P., & Li, V. S. W. (2022) · Nature Reviews Gastroenterology & Hepatology · doi:10.1038/s41575-022-00586-x · Cited by 27
Advances in tumor microenvironment: Applications and challenges of 3D bioprinting
Dong, Y., Zhou, X., Ding, Y., Luo, Y., & Zhao, H. (2024) · Biochemical and Biophysical Research Communications · doi:10.1016/j.bbrc.2024.150339 · Cited by 29
Gouripriya, D. A., Adhikari, J., Debnath, P., Ghosh, S., Ghosh, P., Thomas, S., Ghandilyan, E., Gorbatov, P., Kuchukyan, E., Gasparyan, S., et al. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.135213 · Cited by 30
CELLULOSE-BASED HYDROGELS IN TISSUE ENGINEERING APPLICATIONS
Rusu, D., Ciolacu, D. E., & Simionescu, B. C. (2019) · Cellulose Chemistry and Technology · doi:10.35812/cellulosechemtechnol.2019.53.88 · Cited by 29
Jongprasitkul, H., Turunen, S., Parihar, V. S., Annurakshita, S., & Kellomäki, M. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c01322 · Cited by 27
Mechanical anisotropy and fracture mode of binder jetting 3D printed calcium sulfate moldings
Hamano, R., Nakagawa, Y., Irawan, V., & Ikoma, T. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101160 · Cited by 27
Latif, M., Jiang, Y., Kumar, B., Song, J. M., Cho, H. C., & Kim, J. (2022) · Advanced Materials Interfaces · doi:10.1002/admi.202200280 · Cited by 27
Parametric visco-hyperelastic constitutive modeling of functionally graded 3D printed polymers
Valizadeh, I., & Weeger, O. (2022) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2022.107335 · Cited by 27
Bioprinting and its Use in Tumor-On-A-Chip Technology for Cancer Drug Screening: A Review
Fang, L., Liu, Y., Qiu, J., & Wan, W. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i4.603 · Cited by 28
The emergence of hybrid cellulose nanomaterials as promising biomaterials
Las‐Casas, B., Dias, I. K. R., Yupanqui-Mendoza, S. L., Pereira, B., Costa, G. R., Rojas, O. J., & Arantes, V. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126007 · Cited by 30
Pei, W., Yu, Y., Wang, P., Zheng, L., Lan, K., Jin, Y., Yong, Q., & Huang, C. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131505 · Cited by 29
Polymeric nanomaterials in 3D bioprinting for tissue engineering and drug delivery applications
Han, S., Fisher, J. P., Mikos, A. G., & Hogan, K. J. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00345 · Cited by 30
Lan, X., Ma, Z., Dimitrov, A., Kunze, M., Mulet‐Sierra, A., Ansari, K., Osswald, M., Seikaly, H. R., Boluk, Y., & Adesida, A. B. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.132819 · Cited by 27
Extrusion-Based Biofabrication in Tissue Engineering and Regenerative Medicine
Hospodiuk, M., Moncal, K. K., Dey, M., & Ozbolat, I. T. (2016) · Springer eBooks · doi:10.1007/978-3-319-40498-1_10-1 · Cited by 35
Simple Inkjet Process To Fabricate Microstructures of Chitinous Nanocrystals for Cell Patterning
Suzuki, S., & Teramoto, Y. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00527 · Cited by 27
Tissue engineering applications in otolaryngology—The state of translation
Niermeyer, W. L., Rodman, C. P., Li, M. M., & Chiang, T. (2020) · Laryngoscope Investigative Otolaryngology · doi:10.1002/lio2.416 · Cited by 28
Self-healing, 3D printed bioinks from self-assembled peptide and alginate hybrid hydrogels
Field, E. H., Ratcliffe, J., Johnson, C. J., Binger, K. J., & Reynolds, N. P. (2024) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.214145 · Cited by 29
Alginate Utilization in Tissue Engineering and Cell Therapy
Sarker, B., & Boccaccini, A. R. (2017) · Springer series in biomaterials science and engineering · doi:10.1007/978-981-10-6910-9_5 · Cited by 26
Artificial Biosystems by Printing Biology
Arrabito, G. D., Ferrara, V., Bonasera, A., & Pignataro, B. (2020) · Small · doi:10.1002/smll.201907691 · Cited by 30
Rasheed, A., Azizi, L., Turkki, P., Janka, M., Hytönen, V. P., & Tuukkanen, S. (2020) · ACS Omega · doi:10.1021/acsomega.0c05036 · Cited by 26
Kim, K., Choi, J. H., & Shin, M. (2021) · Polymers · doi:10.3390/polym13060892 · Cited by 27
Chen, H., Ahmad, T., Haider, M. S., Hahn, L., Stahlhut, P., Gröll, J., & Luxenhofer, R. (2021) · Biofabrication · doi:10.1088/1758-5090/ac40ee · Cited by 26
“For example, the printing of alginate or pre-/semi-crosslinked alginate/CaCl2 (CaCO3) in solutions or in the presence of small droplets (mist) containing CaCl2 [15–17], the modification of commercially available 3D printer nozzles (coaxial nozzle-assisted system) [18, 19], and the use of rheology modifiers such as cla…”
Wang, Z., Huang, S., Zhao, X., Yang, S., Mai, K., Qin, W., Liu, K., Huang, J., Feng, Y., Li, J., et al. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c03642 · Cited by 26
Bacterial cellulose: Biopolymer with novel medical applications
Jadczak, K., & Ochędzan‐Siodłak, W. (2023) · Journal of Biomaterials Applications · doi:10.1177/08853282231184734 · Cited by 27
“One of the earliest solutions was proposed by Markstedt et al.(105) in 2015.”
BackgroundInfluentialInternalization of (bis)phosphonate-modified cellulose nanocrystals by human osteoblast cells
Gorgieva, S., Vivod, V., Maver, U., Gradišnik, L., Dolenšek, J., & Kokol, V. (2017) · Cellulose · doi:10.1007/s10570-017-1432-5 · Cited by 26
3D printing: prospects and challenges
Martins, J. P., Ferreira, M. P. A., Ezazi, N. Z., Hirvonen, J. T., Santos, H. A., Thrivikraman, G., França, C. M., Athirasala, A., Tahayeri, A., & Bertassoni, L. E. (2017) · Elsevier eBooks · doi:10.1016/b978-0-323-48063-5.00004-6 · Cited by 35
Long‐term in vivo integrity and safety of 3D ‐bioprinted cartilaginous constructs
Apelgren, P., Amoroso, M., Säljö, K., Lindahl, A. H., Brantsing, C., Orrhult, L. S., Markstedt, K., Gatenholm, P., & Kölby, L. (2020) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34687 · Cited by 25
“…comparable to findings reported previously regarding cell-free samples prepared with similar scaffold material (cellulose and alginate) (compressive stress at 30% strain: 0.032 ± 0.005 MPa; and compressive stiffness at 30% strain: 0.15 ± 0.05 MPa) (Markstedt et al., 2015; Nimeskern et al., 2013).”
BackgroundInfluentialSelf-citationAdditive manufacturing of functionalized nanomaterials for the modern health care industry
Singh, J., Singh, G., & Pandey, P. M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-823152-4.00003-x · Cited by 25
Applications of 3D Bio-Printing in Tissue Engineering and Biomedicine
Jiang, W., Mei, H., & Zhao, S. (2021) · Journal of Biomedical Nanotechnology · doi:10.1166/jbn.2021.3078 · Cited by 25
Boularaoui, S. M., Shanti, A., Khan, K. A., Iacoponi, S., Christoforou, N., & Stefanini, C. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00184 · Cited by 25
Wulle, F., Görke, O., Schmidt, S., Nistler, M., Tovar, G. E. M., Riedel, O., Verl, A. W., Weber, A., & Southan, A. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102566 · Cited by 34
Boonlai, W., Hirun, N., Suknuntha, K., & Tantishaiyakul, V. (2022) · Polymer Bulletin · doi:10.1007/s00289-022-04271-6 · Cited by 25
Hong, H., Kim, M., Lee, W., Jeon, M., Lee, C., Kim, H., Im, H., & Piao, Y. (2023) · Journal of Nanobiotechnology · doi:10.1186/s12951-023-02108-6 · Cited by 27
“Based on these properties, BC is used in various biomedical applications, such as diagnostic sensors [33, 34], tissue engineering [35], drug delivery systems [36–38], wound dressing [39–42], and artificial skin [43].”
MethodLi, H., Xia, Y., Guo, R., Wang, H., Wang, X., Yang, Z., Zhao, Y. F., Li, J., Wang, C., & Huan, S. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122494 · Cited by 25
Printing@Clinic: From Medical Models to Organ Implants
Zhao, H., Yang, F., Fu, J., Gao, Q., Liu, A., Sun, M., & He, Y. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00542 · Cited by 25
Jessop, Z. M., Gao, N., Manivannan, S., Al‐Sabah, A., & Whitaker, I. S. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-101103-4.00034-x · Cited by 27
Narayanan, L. K., Thompson, T. L., Shirwaiker, R. A., & Starly, B. (2018) · Biofabrication · doi:10.1088/1758-5090/aaccbf · Cited by 25
Jamal, A. E., Bougault, C., Mebarek, S., Magne, D., Cuvillier, O., & Brizuela, L. (2019) · Bone · doi:10.1016/j.bone.2019.115087 · Cited by 28
Lu, C., Wang, C., Yu, J., Wang, J., & Chu, F. (2020) · ChemSusChem · doi:10.1002/cssc.202000324 · Cited by 26
Pitarresi, G. L., Martorana, A., Palumbo, F. S., Fiorica, C., & Giammona, G. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.07.254 · Cited by 25
Additive Manufacturing with Cellulose‐Based Composites: Materials, Modeling, and Applications
De, S., Rukmani, S. J., Zhao, X., Clarkson, C. M., Vautard, F., Bhagia, S., Goswami, M., Zhang, S., Elyas, S. F., Zhao, W. T., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202414222 · Cited by 28
Wang, H., Wang, Z., Liu, H., Liu, J., Li, R., Zhu, X.-J., Ren, M., Wang, M., Liu, Y., Li, Y., et al. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.777039 · Cited by 26
Research Progress on Hydrogel–Elastomer Adhesion
Meng, L., He, J., & Pan, C. (2022) · Materials · doi:10.3390/ma15072548 · Cited by 25
Bioinspired polymeric heart valves derived from polyurethane and natural cellulose fibers
Guo, F., Han, R., Ying, J., Zhang, Z., Yang, R. L., & Zhang, X. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.09.063 · Cited by 24
Biomass-derived fiber materials for biomedical applications
Li, D., Wang, Y., Huang, W., & Gong, H. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1058050 · Cited by 33
“3D bioprinters can distribute materials while moving in the X, Y, and Z directions, which can prepare complex cartilage structures, such as a human ear and sheep meniscus, with high shape fidelity and printing resolution (Markstedt et al., 2015).”
BackgroundJiao, H., Sun, J., Shi, Y., Lu, X., Ali, S. S., Fu, Y., Zhang, H., Li, Y., Wang, Q., Zhou, M., et al. (2023) · Cellulose · doi:10.1007/s10570-023-05302-9 · Cited by 26
Abbadessa, A., Ronca, A., & Salerno, A. (2023) · Drug Delivery and Translational Research · doi:10.1007/s13346-023-01437-1 · Cited by 26
“Interest-ingly, bacterial NC fibrils have a width of approximately 100 nm, which makes them similar to CoL fibrils [81].”
BackgroundTalekar, S., Barrow, C. J., Nguyen, H. C., Zolfagharian, A., Zare, S., Farjana, S. H., Macreadie, P. I., Ashraf, M., & Trevathan‐Tackett, S. M. (2024) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.171728 · Cited by 27
3D bioprinting of polysaccharides and their derivatives: From characterization to application
Mohan, T., Maver, T., Štiglic, A. D., Kleinschek, K. S., & Kargl, R. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-102194-1.00006-2 · Cited by 32
Natural Origin Materials for Osteochondral Tissue Engineering
Bonani, W., Singhatanadgige, W., Aramwit, P., & Motta, A. (2018) · Advances in experimental medicine and biology · doi:10.1007/978-3-319-76711-6_1 · Cited by 28
Horbert, V., Boettcher, J., Foehr, P., Krämer, F., Udhardt, U., Bungartz, M., Brinkmann, O., Burgkart, R., Klemm, D., & Kinne, R. W. (2019) · Cellulose · doi:10.1007/s10570-019-02286-3 · Cited by 24
Bioprinting a cell‐laden matrix for bone regeneration: A focused review
Ghorbani, F., Li, D., Zhong, Z., Sahranavard, M., Qian, Z., Ni, S., Zhang, Z., Zamanian, A., & Yu, B. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49888 · Cited by 26
Yao, Y., Molotnikov, A., Parkington, H. C., Meagher, L., & Forsythe, J. S. (2022) · Biofabrication · doi:10.1088/1758-5090/ac6e87 · Cited by 26
“These findings are consistent with the study by Markstedt et al , where shape fidelity was improved for higher values of zero-shear viscosity and conversely reduced for lower values of zero-shear viscosity [44].”
Yes-Associated Protein 1: Role and Treatment Prospects in Orthopedic Degenerative Diseases
Xie, W., Xiao, W., Tang, K., Zhang, L., & Li, Y. (2020) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2020.573455 · Cited by 25
Saddique, A., & Cheong, I. W. (2021) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-021-0926-x · Cited by 23
Pérez-Cortez, J. E., Sánchez-Rodríguez, V. H., Gallegos-Martínez, S., Chuck‐Hernández, C., Rodriguez, C. A., Álvarez, M. M., Santiago, G. T., Vázquez, E., & Martínez-López, J. I. (2022) · Micromachines · doi:10.3390/mi14010055 · Cited by 24
Schaefer, N., Mier, M. S. A., Sonnleitner, D., Murenu, N., Ng, X. J., Lamberger, Z., Büchner, M., Trossmann, V. T., Schubert, D. W., Scheibel, T., et al. (2023) · Small Methods · doi:10.1002/smtd.202201717 · Cited by 23
Jiang, Z., Qin, S., Wang, W., Du, T., Zang, Y., He, Y., Dong, X., Liu, H., & Ma, G. (2024) · Smart Materials in Medicine · doi:10.1016/j.smaim.2023.12.002 · Cited by 32
Murphy, C. A., Serafin, A., & Collins, M. N. (2024) · Polymers · doi:10.3390/polym16141958 · Cited by 23
“…this largely concurs with the fi ndings in FTIR, as hydrogen bonding between the GAGs and GelMA gives rise to transient gel-like behaviour [68,69]. dominates, and indicates all samples displayed gel-like behaviour at room temperature before crosslinking; this largely concurs with the…”
BackgroundResultFan, J., Ding, Z., Cai, Y., Lai, Y., Huang, C. B., Jiang, B., Zhou, Z., & Luo, Z. (2025) · Aggregate · doi:10.1002/agt2.731 · Cited by 33
“The inclusion of cells facilitates the replication of fine extracellular matrix (ECM) components and intricate microstructuresencompassingmultiplecelltypes[97].”
Repopulating Decellularized Kidney Scaffolds: An Avenue for Ex Vivo Organ Generation
McKee, R. A., & Wingert, R. A. (2016) · Materials · doi:10.3390/ma9030190 · Cited by 24
Lauri, J., Koponen, A., Haavisto, S., Czajkowski, J., & Fabritius, T. (2017) · Cellulose · doi:10.1007/s10570-017-1493-5 · Cited by 23
“2013), nanocomposites (Siró and Plackett 2010), and 3D printing (Markstedt et al. 2015; Shao et al. 2015).”
BackgroundPromising Sensing Platforms Based on Nanocellulose
Soriano, M. L., & Dueñas-Mas, M. J. (2018) · Springer series on chemical sensors and biosensors · doi:10.1007/5346_2018_26 · Cited by 24
The application of natural polymer–based hydrogels in tissue engineering
Yang, J., Sun, X., Zhang, Y., & Chen, Y. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816421-1.00010-0 · Cited by 23
A high-throughput approach to compare the biocompatibility of candidate bioink formulations
Bedell, M. L., Melchiorri, A. J., Aleman, J., Skardal, A., & Mikos, A. G. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00068 · Cited by 24
Seaweed polysaccharides as sustainable building blocks for biomaterials in tissue engineering
Carvalho, D. N., Inácio, A. R., Sousa, R. O., Reis, R. L., & Silva, T. H. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-817943-7.00019-6 · Cited by 28
Apelgren, P., Amoroso, M., Säljö, K., Montelius, M., Lindahl, A. H., Orrhult, L. S., Gatenholm, P., & Kölby, L. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2021.121002 · Cited by 24
“Cellular structures and cell viability can be preserved by keeping the extrusion pressure and the shear stress as low as possible in the nozzle [49,50].”
Self-citationKjesbu, J. S., Zaytseva‐Zotova, D., Sämfors, S., Gatenholm, P., Troedsson, C., Thompson, E. M., & Strand, B. L. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119284 · Cited by 23
Self-citationShahabipour, F., Oskuee, R. K., Dehghani, H., Shokrgozar, M. A., Aninwene, G. E., & Bonakdar, S. (2020) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36928 · Cited by 23
Avelino, T. M., Harb, S. V., Adamóski, D., Oliveira, L. C. M., Horinouchi, C. D. D. S., de Azevedo, R. J., Azoubel, R. A., Thomaz, V. K., Batista, F. A. H., d’Ávila, M. A., et al. (2024) · Communications Biology · doi:10.1038/s42003-024-07106-4 · Cited by 23
“This shear-thinning behavior is advantageous for bioinks because as the ink is extruded through the syringe nozzle, shearoccursandviscositydecreases,thusallowingthematerialto fl owmore easily 19 .”
Nanomaterials for bioprinting: functionalization of tissue-specific bioinks
Theus, A. S., Ning, L., Jin, L., Roeder, R. K., Zhang, J. J., & Serpooshan, V. (2021) · Essays in Biochemistry · doi:10.1042/ebc20200095 · Cited by 23
Geometrical control of degradation and cell delivery in 3D printed nanocellulose hydrogels
Das, R., Lee, C. P., Prakash, A., Hashimoto, M., & Fernandez, J. G. (2021) · Materials Today Communications · doi:10.1016/j.mtcomm.2021.103023 · Cited by 22
Cutting-Edge Technologies for Inflamed Joints on Chip: How Close Are We?
Kahraman, E., Ribeiro, R. D. C., Lamghari, M., & Neto, E. (2022) · Frontiers in Immunology · doi:10.3389/fimmu.2022.802440 · Cited by 24
Gabryś, T., Fryczkowska, B., Fabia, J., & Biniaś, D. (2022) · Polymers · doi:10.3390/polym14142864 · Cited by 23
Adedeji, O. E., Choi, J., Park, G. E., Kang, H. J., Aminu, M. O., Min, J. H., Chinma, C. E., Moon, K., & Jung, Y. H. (2022) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2022.103086 · Cited by 22
Guagliano, G., Volpini, C., Sardelli, L., Bloise, N., Vangosa, F. B., Cornaglia, A. I., Dotti, S., Villa, R., Visai, L., & Petrini, P. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c01226 · Cited by 22
Zhang, C., Wang, G., Lin, H., Shang, Y., Liu, N., Zhen, Y., & An, Y. (2023) · Cell Proliferation · doi:10.1111/cpr.13417 · Cited by 23
Tuning the water interactions of cellulose nanofibril hydrogels using willow bark extract
Huynh, N., Valle‐Delgado, J. J., Fang, W., Arola, S., & Österberg, M. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121095 · Cited by 27
Chayanun, S., Soufivand, A. A., Faber, J., Budday, S., Lohwongwatana, B., & Boccaccini, A. R. (2023) · Advanced Engineering Materials · doi:10.1002/adem.202300641 · Cited by 22
Lignin: A multi-faceted role/function in 3D printing inks
Yang, J. H., An, X., Lü, B., Cao, H., Cheng, Z., Tong, X., Liu, H., & Ni, Y. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131364 · Cited by 23
Mauro, F., Corrado, B., Gregorio, V. D., Lagreca, E., Natale, C. D., Vecchione, R., & Netti, P. A. (2024) · Scientific Reports · doi:10.1038/s41598-024-62462-9 · Cited by 23
“features, including mechanical and thermal properties, as well as printability and biodegradability 23–26 , although in combination with other polymers such as alginate 27 or gelatin 28 to make it processable.”
Hiller, A., Borchers, K., Tovar, G. E. M., & Southan, A. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.10.008 · Cited by 23
Advancements in craniofacial prosthesis fabrication: A narrative review of holistic treatment
Jazayeri, H. E., Kang, S., Masri, R. M., Kuhn, L., Fahimipour, F., Vanevenhoven, R., Thompson, G. B., Gheisarifar, M., Tahriri, M., & Tayebi, L. (2018) · The Journal of Advanced Prosthodontics · doi:10.4047/jap.2018.10.6.430 · Cited by 22
“These traditional techniques suffer from several shortcomings: (1) the surgery is technically demanding due to the complex 3D geometry of the auricular cartilage; (2) reconstruction is associated with considerable morbidity due to the presence of two surgical sites, the donor and graft recipient sites62; (3) there is…”
Background3D Bioprinting: An attractive alternative to traditional organ transplantation
Iqbal, R. K., Darakhshanda, I., & a, R. R. (2019) · Archive of Biomedical Science and Engineering · doi:10.17352/abse.000012 · Cited by 22
Image analysis as PAT-Tool for use in extrusion-based bioprinting
Strauß, S., Meutelet, R., Radosevic, L., Gretzinger, S., & Hubbuch, J. J. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00112 · Cited by 26
3D Printed Chitosan Composite Scaffold for Chondrocytes Differentiation
Sahai, N., Gogoi, M., & Tewari, R. P. (2020) · Current Medical Imaging Formerly Current Medical Imaging Reviews · doi:10.2174/15734056mteybndk91 · Cited by 23
Wasim, M., Shi, F., Liu, J., Zhang, H., Zhu, K., & Tian, Z. (2022) · Journal of Polymer Research · doi:10.1007/s10965-022-03265-2 · Cited by 22
Metadata
- Authors
- Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P.
- Affiliations
- Wallenberg Wood Science Center (SE)
- Wallenberg Wood Science Center and ‡Biopolymer Technology, Department of Chemical and Biological Engineering, Chalmers University of Technology, Gothenburg 412 96, Sweden
- Corresponding author
- Gatenholm, Paul
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-04-07
- Volume
- 16
- Issue
- 5
- Pages
- 1489-1496
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1994903148
- Cited by
- 1,528
- References
- 39
- Citations by year
- 2026: 64 · 2025: 90 · 2024: 116 · 2023: 151 · 2022: 198 · 2021: 204 · 2020: 198 · 2019: 177 · 2018: 147 · 2017: 99 · 2016: 73 · 2015: 9
- FWCI
- 54.39
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Chalmers Research (Chalmers University of Technology) (submittedVersion)
- Funders
- European Commission
- VINNOVA
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- 3D bioprinting, human chondrocytes, cartilage tissue engineering, nanocellulose, alginate, bioinks, cellulose nanofibers, shear thinning, hydrogels, meniscus, auricular cartilage, cell viability, shape fidelity
- MeSH terms
- Alginates, Animals, Cartilage, Cellulose, Hexuronic Acids, Humans, Chondrocytes, Hydrogel, Polyethylene Glycol Dimethacrylate, Glucuronic Acid, Tissue Engineering, Regenerative Medicine, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.