3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications
The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Abstract
The introduction of 3D bioprinting is expected to revolutionize the field of tissue engineering and regenerative medicine. The 3D bioprinter is able to dispense materials while moving in X, Y, and Z directions, which enables the engineering of complex structures from the bottom up. In this study, a bioink that combines the outstanding shear thinning properties of nanofibrillated cellulose (NFC) with the fast cross-linking ability of alginate was formulated for the 3D bioprinting of living soft tissue with cells. Printability was evaluated with concern to printer parameters and shape fidelity. The shear thinning behavior of the tested bioinks enabled printing of both 2D gridlike structures as well as 3D constructs. Furthermore, anatomically shaped cartilage structures, such as a human ear and sheep meniscus, were 3D printed using MRI and CT images as blueprints. Human chondrocytes bioprinted in the noncytotoxic, nanocellulose-based bioink exhibited a cell viability of 73% and 86% after 1 and 7 days of 3D culture, respectively. On the basis of these results, we can conclude that the nanocellulose-based bioink is a suitable hydrogel for 3D bioprinting with living cells. This study demonstrates the potential use of nanocellulose for 3D bioprinting of living tissues and organs.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [28]
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Alginate Hydrogels as Biomaterials
Augst, A. D., Kong, H. J., & Mooney, D. J. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600069 · Cited by 1,839
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Bacterial cellulose as a potential scaffold for tissue engineering of cartilage
Svensson, A., Nicklasson, E., Harrah, T., Panilaitis, B., Kaplan, D. L., Brittberg, M., & Gatenholm, P. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.049 · Cited by 1,026
Self-citationSurface engineering approaches to micropattern surfaces for cell-based assays
Falconnet, D., Csucs, G., Michelle Grandin, H., & Textor, M. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.024 · Cited by 944
Wågberg, L., Decher, G., Norgren, M., Lindström, T., Ankerfors, M., & Axnäs, K. (2008) · Langmuir · doi:10.1021/la702481v · Cited by 867
Research works printed but not linked: 1
- Wågberg L., 1987, Colloids Surf., 27, 163, 10.1016/0166-6622(87)80335-9 · doi:10.1016/0166-6622(87)80335-9 · Paper page
Cited by
Items 601–700 of 1,001
3D Printing of Bacteria: The Next Frontier in Biofabrication
Kyle, S. (2018) · Trends in biotechnology · doi:10.1016/j.tibtech.2018.01.010 · Cited by 49
Characterization of pulp derived nanocellulose hydrogels using AVAP® technology
Kyle, S., Jessop, Z. M., Al‐Sabah, A., Hawkins, K. M., Lewis, A. R., Maffeïs, T. G. G., Charbonneau, C. M. E., Gazze, A. S., Francis, L. W., Iakovlev, M., et al. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.06.091 · Cited by 52
“This implies that there are stronger particle-particle interactions or increased entanglements between nano-and microstructures within the NC blend compared to the NC fibrils and CNCs which would provide a better shape fidelity during bioprinting (Markstedt et al., 2015).”
InfluentialCardiovascular tissue bioprinting: Physical and chemical processes
Hu, J. B., Tomov, M. L., Buikema, J. W., Chen, C. S., Mahmoudi, M., Wu, S. M., & Serpooshan, V. (2018) · Applied Physics Reviews · doi:10.1063/1.5048807 · Cited by 52
Development of a Self‐Assembled Peptide/Methylcellulose‐Based Bioink for 3D Bioprinting
Cofiño, C., Pérez‐Amodio, S., Semino, C. E., Engel, E., & Mateos‐Timoneda, M. A. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201900353 · Cited by 49
Composite Inks for Extrusion Printing of Biological and Biomedical Constructs
Ravanbakhsh, H., Bao, G., Luo, Z., Mongeau, L., & Zhang, Y. S. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01158 · Cited by 51
Wasim, M., Mushtaq, M., Khan, S. U., Farooq, A., Naeem, M. A., Khan, M. R., Salam, A., & Weı, Q. (2020) · Journal of Industrial Textiles · doi:10.1177/1528083720977201 · Cited by 54
Cellulose nanocrystals as support nanomaterials for dual droplet-based freeform 3D printing
Yoon, H. S., Yang, K., Kim, Y. M., Nam, K., & Roh, Y. H. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118469 · Cited by 49
Nanocellulose-Based Scaffolds for Chondrogenic Differentiation and Expansion
Szustak, M., & Gendaszewska‐Darmach, E. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.736213 · Cited by 49
“The ink exhibited good gelling during crosslinking and minimum shape deformation and was demonstrated to be a viable host for human nasoseptal chondrocytes (hNCs) that were encapsulated and 3D bioprinted into gridded constructs (Markstedt et al., 2015).”
BackgroundLan, X., Ma, Z., Szojka, A. R. A., Kunze, M., Mulet‐Sierra, A., Vyhlidal, M. J., Boluk, Y., & Adesida, A. B. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.766399 · Cited by 55
3D bioprinted scaffolds for osteochondral regeneration: advancements and applications
Lu, J., Gao, Y. P., Cao, C., Wang, H., Ruan, Y., Qin, K., Liu, H., Wang, Y., Yang, P., Liu, Y., et al. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101834 · Cited by 79
“Alginate hydrogels effectively support the growth and proliferation of encapsulated chondrocytes, help maintain their phenotype, and enhance the expression of collagen type II and aggrecan [61,62].”
Biofabrication for osteochondral tissue regeneration: bioink printability requirements
Abdulghani, S., & Morouço, P. (2019) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-019-6218-x · Cited by 48
Cellulose nanofibrils for biomaterial applications
Sharip, N. S., & Ariffin, H. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.06.074 · Cited by 48
Guo, Z., Xia, J., Mi, S., & Sun, W. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01864 · Cited by 48
Shimojo, A. A. M., Rodrigues, I. C. P., Perez, A. G. M., Souto, E. B., Gabriel, L. P., & Webster, T. J. (2020) · Springer eBooks · doi:10.1007/978-3-030-34471-9_23 · Cited by 56
3D biofabrication for soft tissue and cartilage engineering
Turnbull, G. S., Clarke, J., Picard, F., Zhang, W., Riches, P. E., Li, B., & Shu, W. (2020) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2020.06.003 · Cited by 53
Electrospinning and 3D bioprinting for intervertebral disc tissue engineering
Pieri, A. D., Byerley, A. M., Musumeci, C. R., Salemizadehparizi, F., Vanderhorst, M. A., & Wuertz‐Kozak, K. (2020) · JOR Spine · doi:10.1002/jsp2.1117 · Cited by 48
Recent Advances in 3D Bioprinting: A Review of Cellulose-Based Biomaterials Ink
Jusoh, W. N. L. W., Sajab, M. S., Abdul, P. M., & Kaco, H. (2022) · Polymers · doi:10.3390/polym14112260 · Cited by 53
Synthesis of alginate/nanocellulose bionanocomposite for in vitro delivery of ampicillin
Poonguzhali, R. V., Basha, S. K., & Kumari, V. S. (2017) · Polymer Bulletin · doi:10.1007/s00289-017-2253-2 · Cited by 47
“because of their excellent physical and biological properties, in particular their tissue repair [2], wound healing [3], and drug delivery [4].”
BackgroundTissue Engineering Strategies for Osteochondral Repair
Maia, F. R., Carvalho, M. R., Oliveira, J. M., & Reis, R. L. (2018) · Advances in experimental medicine and biology · doi:10.1007/978-3-319-76735-2_16 · Cited by 47
Bioprinting of Stem Cells: Interplay of Bioprinting Process, Bioinks, and Stem Cell Properties
Ding, S., Feng, L., Wu, J., Zhu, F., Tan, Z., & Yao, R. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00399 · Cited by 49
Natural fiber biodegradable composites and nanocomposites
Luzi, F., Puglia, D., & Torre, L. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102426-3.00010-2 · Cited by 66
Nia, M. H., Tavakolian, M., Kiasat, A. R., & van de Ven, T. G. M. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c02090 · Cited by 47
Ding, Q., Cui, J., Shen, H., He, C., Wang, X., Shen, S. G., & Lin, K. (2020) · Wiley Interdisciplinary Reviews Nanomedicine and Nanobiotechnology · doi:10.1002/wnan.1669 · Cited by 53
Valizadeh, I., Aboud, A. A., Dörsam, E., & Weeger, O. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102108 · Cited by 56
Chondroitin and Dermatan Sulfate Bioinks for 3D Bioprinting and Cartilage Regeneration
Lafuente‐Merchan, M., Ruíz, S., Zabala, A., Gálvez‐Martín, P., Marchal, J. A., Vázquez‐Lasa, B., Gallego, I., del Burgo, L. S., & Pedraz, J. L. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202100435 · Cited by 49
Materials from trees assembled by 3D printing – Wood tissue beyond nature limits
Markstedt, K., Håkansson, K. M. O., Toríz, G., & Gatenholm, P. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.02.005 · Cited by 46
Self-citationHazeri, Y., Irani, S., Zandi, M., & Pezeshki‐Modaress, M. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.10.061 · Cited by 46
History and Trends of 3D Bioprinting
Thayer, P., Martinez, H., & Gatenholm, E. (2020) · Methods in molecular biology · doi:10.1007/978-1-0716-0520-2_1 · Cited by 56
Luo, W., Song, Z., Wang, Z., Wang, Z., Li, Z., Wang, C., Liu, H., Liu, Q., & Wang, J. (2020) · Journal of Nanomaterials · doi:10.1155/2020/3863428 · Cited by 46
Tian, Y., Liu, M., Liu, Y., Shi, C., Wang, Y., Liu, T., Huang, Y., Zhong, P., Dai, J., & Liu, X. (2020) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37114 · Cited by 46
Du, C., Hu, J. Q., Wu, X., Shi, H., Yu, H. C., Qian, J. W., Yin, J., Gao, C., Wu, Z. L., & Zheng, Q. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb02465e · Cited by 47
Ghanbari, M., Salavati‐Niasari, M., & Mohandes, F. (2022) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2022.103730 · Cited by 45
Jayeoye, T. J., Eze, F. N., Olatunji, O. J., & Tyopine, A. A. (2022) · Scientific Reports · doi:10.1038/s41598-022-13384-x · Cited by 47
Lai, J., Wang, C., Liu, J. S., Chen, S., Liu, C., Huang, X., Wu, J., Pan, Y., Xie, Y., & Wang, M. (2022) · Biofabrication · doi:10.1088/1758-5090/ac84b0 · Cited by 47
“For angular frequency sweep (figure 2(b)), it could be seen that both emulsion ink and bioink showed higher storage modulus (G ′ ) than loss modulus (G ′′ ), indicating that they had gel-like states, which were beneficial for micro extrusion-based 3D printing [41].”
Zeng, J., Jia, L., Wang, D., Chen, Z., Liu, W., Yang, Q., Liu, X., & Jiang, H. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v9i1.631 · Cited by 45
Rapid Prototyping Technologies: 3D Printing Applied in Medicine
Oleksy, M., Dynarowicz, K., & Aebisher, D. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15082169 · Cited by 55
When nanocellulose meets hydrogels: the exciting story of nanocellulose hydrogels taking flight
Du, Y., & Feng, G. (2023) · Green Chemistry · doi:10.1039/d3gc01829f · Cited by 47
Advances in printing biomaterials and living cells: implications for islet cell transplantation
Yue, Z., Liu, X., Coates, P. T., & Wallace, G. G. (2016) · Current Opinion in Organ Transplantation · doi:10.1097/mot.0000000000000346 · Cited by 50
“Extrusion printing has been explored for fabrication of liver [11,12], cartilage [13,14], and neuronal tissue [3,15], osteochondral grafts [16] and heart valve conduits [17,18].”
BackgroundSurface properties and porosity of highly porous, nanostructured cellulose II particles
Beaumont, M., Kondor, A., Plappert, S. F., Mitterer, C., Opietnik, M., Potthast, A., & Rosenau, T. (2016) · Cellulose · doi:10.1007/s10570-016-1091-y · Cited by 45
“…in composites (Cai et al. 2012; Li et al. 2014), insulation (Hayase et al. 2014; Kobayashi et al. 2014), packaging (Aulin et al. 2010; Lavoine et al. 2014), tissue engineer- ing (Domingues et al. 2014; Markstedt et al. 2015) and manyother utilizationways (Habibi et al. 2010; Lin et al. 2012).”
Background5.14 Biofabrication in Tissue Engineering ☆
Woodfield, T. B. F., Lim, K. S., Morouço, P., Levato, R., Malda, J., & Melchels, F. P. W. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.10221-8 · Cited by 51
Three Dimensional Printing-Based Strategies for Functional Cartilage Regeneration
Shen, S. H., Chen, M., Guo, W., Li, H., Li, X., Huang, S., Luo, X., Wang, Z., Yang, W. L., Yuan, Z., et al. (2019) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2018.0248 · Cited by 45
“108 At present, no biomaterials with the right mechanical strength and out-standing biocompatibility and that do not reduce the activity of cells after printing have been found.”
Ultrasensitive Wearable Strain Sensors of 3D Printing Tough and Conductive Hydrogels
Wang, J., Liu, Y., Su, S., Wei, J., Rahman, S. E., Ning, F., Christopher, G. F., Cong, W., & Qiu, J. (2019) · Polymers · doi:10.3390/polym11111873 · Cited by 47
Universal Nanocarrier Ink Platform for Biomaterials Additive Manufacturing
Guzzi, E. A., Bovone, G., & Tibbitt, M. W. (2019) · Small · doi:10.1002/smll.201905421 · Cited by 47
Addressing present pitfalls in 3D printing for tissue engineering to enhance future potential
Placone, J. K., Mahadik, B. P., & Fisher, J. P. (2020) · APL Bioengineering · doi:10.1063/1.5127860 · Cited by 48
Frazier, T. P., Alarcon, A., Wu, X., Mohiuddin, O. A., Motherwell, J. M., Carlsson, A. H., Christy, R. J., Edwards, J. V., Mackin, R. T., Prevost, N. T., et al. (2020) · Biomolecules · doi:10.3390/biom10101373 · Cited by 47
Polysaccharide-Based Hydrogels for Microencapsulation of Stem Cells in Regenerative Medicine
Lee, S., Ma, J., Khoo, T. S., Abdullah, N., Kahar, N. N. F. N. M. N., Hamid, Z. A. A., & Mustapha, M. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.735090 · Cited by 48
“During the process, the polymer solution is transformed into a 3D structure by crosslinking, which involves ionic crosslink or UV photo polymerization (Markstedt et al., 2015).”
MethodCurrent advancements in bio-ink technology for cartilage and bone tissue engineering
Badhe, R. V., Chatterjee, A., Bijukumar, D. R., & Mathew, M. T. (2023) · Bone · doi:10.1016/j.bone.2023.116746 · Cited by 47
Malekpour, K., Hazrati, A., Khosrojerdi, A., Roshangar, L., & Ahmadi, M. (2023) · Regenerative Therapy · doi:10.1016/j.reth.2023.10.006 · Cited by 50
Ravi, K., Manoharan, T. J. M., Wang, K.-C., Pockaj, B. A., & Nikkhah, M. (2023) · Biomaterials · doi:10.1016/j.biomaterials.2023.122428 · Cited by 47
Koo, Y., & Kim, G. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025010 · Cited by 44
Pulping and Pretreatment Affect the Characteristics of Bagasse Inks for Three-dimensional Printing
Chinga‐Carrasco, G., Ehman, N. V., Pettersson, J., Vallejos, M. E., Brodin, M., Felissia, F. E., Håkansson, J., & Área, M. C. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b04440 · Cited by 47
Cellulose-based biogenic supports, remarkably friendly biomaterials for proteins and biomolecules
Culica, M. E., Chibac-Scutaru, A. L., Mohan, T., & Coseri, S. (2021) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2021.113170 · Cited by 45
Aljohani, W., Ullah, M. W., Li, W., Shi, L., Zhang, X., & Yang, G. (2018) · Journal of Polymer Research · doi:10.1007/s10965-018-1455-0 · Cited by 44
“To overcome such limitations, different types of natural and synthetic polymers, both alone and in combination with other polymers, such as nanocellulose [8], gelatin [9], alginate [10], chitosan [11], silk [12], hyaluronic acid [13], starch [14], poly(ethylene glycol) [15], poly(ɛcaprolactone) [16], poly(lactic-co-gl…”
Background3D bio-printing technology for body tissues and organs regeneration
Biazar, E., Masoumeh Najafi, S., Keshel, S. H., Yazdankhah, M., Rafiei, A., & Biazar, D. (2018) · Journal of Medical Engineering & Technology · doi:10.1080/03091902.2018.1457094 · Cited by 47
“demonstrated mixing alginate with nano-cellulose, which has outstanding shear-thinning properties that enabled fabrication of anatomically correct ear and meniscus constructs [67].”
BackgroundLammi, M. J., Piltti, J., Prittinen, J., & Qu, C. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19092700 · Cited by 46
iPSC Bioprinting: Where are We at?
Romanazzo, S., Nemec, S. R., & Roohani, I. (2019) · Materials · doi:10.3390/ma12152453 · Cited by 47
Utilization of Carbon Nanotubes in Manufacturing of 3D Cartilage and Bone Scaffolds
Szymański, T., Mieloch, A. A., Richter, M., Trzeciak, T., Florek, E., Rybka, J. D., & Giersig, M. (2020) · Materials · doi:10.3390/ma13184039 · Cited by 44
Use of electroconductive biomaterials for engineering tissues by 3D printing and 3D bioprinting
Alizadeh, P., Soltani, M., Tutar, R., Apu, E. H., Maduka, C. V., Unluturk, B. D., Contag, C. H., & Ashammakhi, N. A. (2021) · Essays in Biochemistry · doi:10.1042/ebc20210003 · Cited by 44
Extrusion-Based Biofabrication in Tissue Engineering and Regenerative Medicine
Hospodiuk, M., Moncal, K. K., Dey, M., & Ozbolat, I. T. (2018) · Springer eBooks · doi:10.1007/978-3-319-45444-3_10 · Cited by 51
Advances in Mechanical Properties of Hydrogels for Cartilage Tissue Defect Repair
Wang, W., Shi, Y., Lin, G., Tang, B., Li, X., Zhang, J., Ding, X., & Zhou, G. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202200539 · Cited by 44
Lithography-based 3D printed hydrogels: From bioresin designing to biomedical application
Ghazali, H. S., Askari, E., Ghazali, Z. S., Naghib, S. M., & Braschler, T. M. (2022) · Colloids and Interface Science Communications · doi:10.1016/j.colcom.2022.100667 · Cited by 42
Carvalho, D. N., Gelinsky, M., Williams, D. S., Mearns‐Spragg, A., Reis, R. L., & Silva, T. H. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.124510 · Cited by 42
Rapid Biofabrication of Printable Dense Collagen Bioinks of Tunable Properties
Griffanti, G., Rezabeigi, E., Li, J., Murshed, M., & Nazhat, S. N. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903874 · Cited by 44
Cheng, J., Jia, Z., & Li, T. (2020) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2020.103893 · Cited by 42
“1 describes a representative preparation process of a μFRG: As a first step, monomers and microfibers such as cellulose bundles are uniformly mixed in a solution or ink ( Gladman et al., 2016 ; Markstedt et al., 2015 ; Siqueira et al., 2017 ; Torres-Rendon et al., 2015 ; Wang et al., 2016 ).”
BackgroundNovel bioinks from UV-responsive norbornene-functionalized carboxymethyl cellulose macromers
Ji, S., Abaci, A., Morrison, T. X., Gramlich, W. M., & Güvendiren, M. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00083 · Cited by 43
Zhou, Y., Qin, R., Chen, T., Zhang, K., & Gui, J. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109621 · Cited by 43
Yoshimasa, Y., & Maruyama, T. (2021) · Reproductive Sciences · doi:10.1007/s43032-021-00503-8 · Cited by 44
3D bioprinting for the repair of articular cartilage and osteochondral tissue
Chartrain, N. A., Gilchrist, K. H., Ho, V. B., & Klarmann, G. J. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00239 · Cited by 44
Cavallaro, G. P., Caruso, M. R., Milioto, S., Fakhrullin, R. F., & Lazzara, G. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.09.170 · Cited by 42
A Review on Bioinks and their Application in Plant Bioprinting
Ghosh, S., & Yi, H. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i4.612 · Cited by 46
“Cellulose, as well as CNCs, are often used in bioinks because of its ability to improve the porosity of the structures, its elasticity, its ability to bind with other substances, and enhancement of bioink viscosity[77,78].”
BackgroundThree-dimensional (3D) printing of hydroxyapatite-based scaffolds: A review
Bogala, M. R. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00244 · Cited by 44
Organized mineralized cellulose nanostructures for biomedical applications
Feng, Y., Cölfen, H., & Xiong, R. (2023) · Journal of Materials Chemistry B · doi:10.1039/d2tb02611b · Cited by 41
3D bioprinting of hydrogel‐based biomimetic microenvironments
Luo, Y., Wei, X., & Huang, P. (2018) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34262 · Cited by 43
Huang, B., Yu, H., Li, Y., Zhang, W., & Liu, X. (2019) · Journal of Cellular Biochemistry · doi:10.1002/jcb.29267 · Cited by 44
“There is only one cell type–chondrocytes in mature cartilage–which controls the degeneration progression of articular cartilage.(12) Many experiments have proved that deregulation of genes in chondrocytes is linked to the synthesis and degradation of cartilage.”
BackgroundCipollaro, L., Ciardulli, M. C., Porta, G. D., Peretti, G. M., & Maffulli, N. (2019) · British Medical Bulletin · doi:10.1093/bmb/ldz034 · Cited by 43
Effect of Fibril Length on the Ice Recrystallization Inhibition Activity of Nanocelluloses
Li, T., Li, M., Zhong, Q., & Wu, T. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116275 · Cited by 41
3D Printing in Drug Delivery and Biomedical Applications: A State-of-the-Art Review
Mahmood, M. A. (2021) · Compounds · doi:10.3390/compounds1030009 · Cited by 48
Chen, Y., Chen, Y., Xiong, X., Cui, R., Zhang, G., Wang, C., Xiao, D., Qu, S., & Weng, J. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2022.100261 · Cited by 41
“2f), which further confirmed that all four samples exhibited a gel-like state [38].”
Background3D bioprinted silk-reinforced Alginate-Gellan Gum constructs for cartilage regeneration
Chakraborty, J., Majumder, N., Sharma, A., Prasad, S., & Ghosh, S. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00232 · Cited by 42
“The printed cell-laden scaffolds are expected to have the least volume shrinkage and should provide adequate mechanical properties post crosslinking [7].”
BackgroundOne-Pot Hierarchical Structuring of Nanocellulose by Electrophoretic Deposition
Kasuga, T., Saito, T., Koga, H., & Nogi, M. (2022) · ACS Nano · doi:10.1021/acsnano.2c06392 · Cited by 41
Shanto, P. C., Park, S.-S., Park, M., & Lee, B. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.213239 · Cited by 46
Living cell‐laden hydrogels: Unleashing the future of responsive biohybrid systems
Hu, X., Lei, B., Li, S., Chen, L., & Li, Q. (2023) · Responsive materials · doi:10.1002/rpm.20230009 · Cited by 42
An innovative cell-printed microscale collagen model for mimicking intestinal villus epithelium
Kim, W.-J., & Kim, G. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.001 · Cited by 40
Recent Advances in 3D Bioprinting for the Regeneration of Functional Cartilage
Ji, X., Hao, Z., Zhao, L., & Xiao, J. (2018) · Regenerative Medicine · doi:10.2217/rme-2017-0106 · Cited by 41
Dharani, S. R., Srinivasan, R., Sarath, R., & Ramya, M. (2020) · Folia Microbiologica · doi:10.1007/s12223-020-00802-8 · Cited by 40
“Markstedt et al. (2015) reported teh use of nanocellulose- alginate bio-ink to 3D bio-print human chondrocytes for cartilage tissues engineering.”
Ebers, L.-S., & Laborie, M. G. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00800 · Cited by 41
A bioprinted complex tissue model for myotendinous junction with biochemical and biophysical cues
Kim, W. J., & Kim, G. (2022) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10321 · Cited by 40
3D printing technique and its application in the fabrication of THz fibers and waveguides
Xu, G., & Skorobogatiy, M. A. (2023) · Journal of Applied Physics · doi:10.1063/5.0146054 · Cited by 39
Wang, Q., Karadaş, Ö., Rosenholm, J. M., Xu, C., Näreoja, T., & Wang, X. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202400431 · Cited by 39
Yu, K., Yang, L., Zhang, N., Wang, S., & Liu, H. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.132668 · Cited by 43
Kabir, M., Hasan, M. K., Rafi, M. N., Repon, M. R., Islam, T., Saha, J., & Rahman, M. M. (2024) · ChemistrySelect · doi:10.1002/slct.202403777 · Cited by 40
Säljö, K., Orrhult, L. S., Apelgren, P., Markstedt, K., Kölby, L., & Gatenholm, P. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00065 · Cited by 41
Self-citationGerdes, S., Ramesh, S., Mostafavi, A., Tamayol, A., Rivero, I. V., & Rao, P. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00598 · Cited by 43
Dual-charge bacterial cellulose as a potential 3D printable material for soft tissue engineering
Hospodiuk-Karwowski, M., Bokhari, S. M. Q., Chi, K., Moncal, K. K., Özbolat, V., Ozbolat, I. T., & Catchmark, J. M. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109598 · Cited by 43
Štiglic, A. D., Gürer, F., Lackner, F., Bračič, D., Winter, A., Gradišnik, L., Makuc, D., Kargl, R., Duarte, I. M. A., Plavec, J., et al. (2022) · iScience · doi:10.1016/j.isci.2022.104263 · Cited by 39
“…nanofibrillated cellulose (NFC) (Chenget al., 2019b) has been frequently combinedwith thewater/acid soluble polysaccharides (e.g., alginate (Markstedt et al., 2015), carboxymethyl cellulose (CMC) (Mohan et al., 2020), chitosan (Kamdem Tamo et al., 2021), etc.), or proteins (e.g.,…”
BackgroundSawdust-derived cellulose nanofibrils with high biosafety for potential bioprinting
Jiao, H., Shi, Y., Sun, J., Lu, X., Zhang, H., Li, Y., Fu, Y., Guo, J., Wang, Q., Liu, H., et al. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.118025 · Cited by 38
Ahn, S. H., Lee, J., Park, S. A., & Kim, W. D. (2016) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-016-0148-1 · Cited by 41
A review on the challenges of 3D printing of organic powders
Whyte, D. J., Rajkhowa, R., Allardyce, B. J., & Kouzani, A. Z. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00057 · Cited by 39
Gatenholm, B., Lindahl, C., Brittberg, M., & Simonsson, S. (2020) · Cartilage · doi:10.1177/1947603520903788 · Cited by 41
Effects of nanocellulose on alginate/gelatin bio-inks for extrusion-based 3D printing
Han, C., Wang, X., Ni, Z., Ni, Y., Huan, W., Lv, Y. A., & Bai, S. (2020) · BioResources · doi:10.15376/biores.15.4.7357-7373 · Cited by 40
“This phenomenon indicated that the NFC/SA/GEL bio-inks presented a clear shear-thinning behavior (Markstedt et al. 2015; Müller et al. 2017), which was attributed to the temporary destruction of the physical interactions between the macromolecules and the alignment of the polymer chains caused by a…”
BackgroundMethodResultInfluential
Metadata
- Authors
- Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P.
- Affiliations
- Wallenberg Wood Science Center (SE)
- Wallenberg Wood Science Center and ‡Biopolymer Technology, Department of Chemical and Biological Engineering, Chalmers University of Technology, Gothenburg 412 96, Sweden
- Corresponding author
- Gatenholm, Paul
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-04-07
- Volume
- 16
- Issue
- 5
- Pages
- 1489-1496
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1994903148
- Cited by
- 1,528
- References
- 39
- Citations by year
- 2026: 64 · 2025: 90 · 2024: 116 · 2023: 151 · 2022: 198 · 2021: 204 · 2020: 198 · 2019: 177 · 2018: 147 · 2017: 99 · 2016: 73 · 2015: 9
- FWCI
- 54.39
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Chalmers Research (Chalmers University of Technology) (submittedVersion)
- Funders
- European Commission
- VINNOVA
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- 3D bioprinting, human chondrocytes, cartilage tissue engineering, nanocellulose, alginate, bioinks, cellulose nanofibers, shear thinning, hydrogels, meniscus, auricular cartilage, cell viability, shape fidelity
- MeSH terms
- Alginates, Animals, Cartilage, Cellulose, Hexuronic Acids, Humans, Chondrocytes, Hydrogel, Polyethylene Glycol Dimethacrylate, Glucuronic Acid, Tissue Engineering, Regenerative Medicine, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.