3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications
The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Abstract
The introduction of 3D bioprinting is expected to revolutionize the field of tissue engineering and regenerative medicine. The 3D bioprinter is able to dispense materials while moving in X, Y, and Z directions, which enables the engineering of complex structures from the bottom up. In this study, a bioink that combines the outstanding shear thinning properties of nanofibrillated cellulose (NFC) with the fast cross-linking ability of alginate was formulated for the 3D bioprinting of living soft tissue with cells. Printability was evaluated with concern to printer parameters and shape fidelity. The shear thinning behavior of the tested bioinks enabled printing of both 2D gridlike structures as well as 3D constructs. Furthermore, anatomically shaped cartilage structures, such as a human ear and sheep meniscus, were 3D printed using MRI and CT images as blueprints. Human chondrocytes bioprinted in the noncytotoxic, nanocellulose-based bioink exhibited a cell viability of 73% and 86% after 1 and 7 days of 3D culture, respectively. On the basis of these results, we can conclude that the nanocellulose-based bioink is a suitable hydrogel for 3D bioprinting with living cells. This study demonstrates the potential use of nanocellulose for 3D bioprinting of living tissues and organs.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [28]
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Alginate Hydrogels as Biomaterials
Augst, A. D., Kong, H. J., & Mooney, D. J. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600069 · Cited by 1,839
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Bacterial cellulose as a potential scaffold for tissue engineering of cartilage
Svensson, A., Nicklasson, E., Harrah, T., Panilaitis, B., Kaplan, D. L., Brittberg, M., & Gatenholm, P. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.049 · Cited by 1,026
Self-citationSurface engineering approaches to micropattern surfaces for cell-based assays
Falconnet, D., Csucs, G., Michelle Grandin, H., & Textor, M. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.024 · Cited by 944
Wågberg, L., Decher, G., Norgren, M., Lindström, T., Ankerfors, M., & Axnäs, K. (2008) · Langmuir · doi:10.1021/la702481v · Cited by 867
Research works printed but not linked: 1
- Wågberg L., 1987, Colloids Surf., 27, 163, 10.1016/0166-6622(87)80335-9 · doi:10.1016/0166-6622(87)80335-9 · Paper page
Cited by
Items 701–800 of 1,001
Microfluidic-assisted bioprinting of tissues and organoids at high cell concentrations
Serex, L., Sharma, K., Rizov, V., Bertsch, A., McKinney, J. D., & Renaud, P. (2021) · Biofabrication · doi:10.1088/1758-5090/abca80 · Cited by 39
“Many types of tissues have been printed such as skin [8], cartilage [9], and blood vessels [10, 11] while increasing both the print size and the complexity [12].”
BackgroundIn vitro maturation and in vivo stability of bioprinted human nasal cartilage
Lan, X., Liang, Y., Vyhlidal, M. J., Erkut, E. J. N., Kunze, M., Mulet‐Sierra, A., Osswald, M., Ansari, K., Seikaly, H. R., Boluk, Y., et al. (2022) · Journal of Tissue Engineering · doi:10.1177/20417314221086368 · Cited by 38
Advantage of Alginate Bioinks in Biofabrication for Various Tissue Engineering Applications
Datta, S. (2023) · International Journal of Polymer Science · doi:10.1155/2023/6661452 · Cited by 41
“[76] bioprinted a human ear and also printed a meniscus of sheep with a bioink mixed with alginate and nanofibrillated cellulose.”
BackgroundMohan, T., Nagaraj, C., Nagy, B. M., Bračič, M., Maver, U., Olschewski, A., Kleinschek, K. S., & Kargl, R. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00304 · Cited by 38
Transparent and Cell-Guiding Cellulose Nanofiber 3D Printing Bioinks
Radeke, C., Pons, R., Mihajlovic, M., Knudsen, J. R., Butdayev, S., Kempen, P. J., Segeritz, C., Andresen, T. L., Pehmøller, C. K., Jensen, T. E., et al. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c16126 · Cited by 37
Bari, G. A. K. M. R., Jeong, J.-H., & Barai, H. R. (2024) · Materials · doi:10.3390/ma17102268 · Cited by 38
“Electrochromic devices (ECDs) undergo reversible changes in optical properties upon the application of an external voltage, making them suitable for various potential applications, such as smart windows, anti-glare rearview mirrors, and displays [66].”
BackgroundAdditive Manufacturing of Polymer Matrix Composites
Yasa, E., & Ersoy, K. (2018) · InTech eBooks · doi:10.5772/intechopen.75628 · Cited by 42
Khan, A., Alamry, K. A., & Asiri, A. M. (2021) · ChemistrySelect · doi:10.1002/slct.202003978 · Cited by 42
Rajasekharan, R., Philip, E., Madhavan, A., Arun, K. B., Binod, P., Pugazhendhi, A., Awasthi, M. K., Gnansounou, E., Pandey, A., & Sindhu, R. (2021) · Environmental Technology & Innovation · doi:10.1016/j.eti.2021.101855 · Cited by 41
“The application of NC based bioink in 3D bioprinting of anatomically formed cartilage structures, such as sheep meniscus and human ear was another novelty (Markstedt et al. 2015).”
Sonnleitner, D., Schrüfer, S., Berglund, L., Schubert, D. W., & Lang, G. (2021) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-021-00276-5 · Cited by 37
Evolution of 3D bioprinting-from the perspectives of bioprinting companies
Ke, D., Niu, C., & Yang, X. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00193 · Cited by 42
Liu, J., Shahriar, M. A., Xu, H., & Xu, C. (2022) · Biofabrication · doi:10.1088/1758-5090/ac8fb7 · Cited by 38
“Commonly applied biological materials are natural or synthetic polymers, such as alginate [19], collagen [20], gelatin methacrylate [21], fibroin [22], poly-ethylene glycol [8], to name a few.”
Liu, S., Kilian, D., Ahlfeld, T., Hu, Q., & Gelinsky, M. (2023) · Biofabrication · doi:10.1088/1758-5090/acb8dc · Cited by 41
“For this purpose, a promising strategy is the temporary increase of the bioink viscosity by addition of thickening components, which do not get stabilized by post-fabrication cross-linking process to prevent an adverse effect on cell viability [12, 36].”
BackgroundPore Size Manipulation in 3D Printed Cryogels Enables Selective Cell Seeding
Serex, L., Braschler, T. M., Филиппова, А., Rochat, A., Béduer, A., Bertsch, A., & Renaud, P. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201700340 · Cited by 37
Hydrogels and hydrogel composites for 3D and 4D printing applications
Liu, S., Chen, X., & Zhang, Y. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816805-9.00014-4 · Cited by 53
Garces, D. G., Strauß, S., Gretzinger, S., Schmieg, B., Jüngst, T., Gröll, J., Meinel, L., Schmidt, I., Hartmann, H., Schenke‐Layland, K., et al. (2023) · Biofabrication · doi:10.1088/1758-5090/acfe3b · Cited by 48
“bioink [29] was delivered as ready-to-use cartridges and procured from a single batch.”
MethodMathur, V., Agarwal, P., Kasturi, M., Varadharajan, S., Devi, E. S., & Vasanthan, K. S. (2025) · Discover Nano · doi:10.1186/s11671-025-04230-w · Cited by 40
Das, D., Zhang, S., & Noh, I. (2017) · Biomedical Materials · doi:10.1088/1748-605x/aa8fa1 · Cited by 36
Bandyopadhyay, A., Dewangan, V. K., Vajanthri, K. Y., Poddar, S., & Mahto, S. K. (2017) · Journal of Applied Biomedicine · doi:10.1016/j.bbe.2017.12.001 · Cited by 36
Extrusion-Based Bioprinting through Glucose-Mediated Enzymatic Hydrogelation
Gantumur, E., Nakahata, M., Kojima, M., & Sakai, S. (2020) · International Journal of Bioprinting · doi:10.18063/ijb.v6i1.250 · Cited by 36
3D bioprinting of oligo(poly[ethylene glycol] fumarate) for bone and nerve tissue engineering
Liu, X., Gaihre, B., George, M. N., Miller, A. L., Xu, H., Waletzki, B. E., & Lu, L. (2020) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37002 · Cited by 37
Ghomi, E. R., Eshkalak, S. K., Singh, S., Chinnappan, A., Ramakrishna, S., & Narayan, R. J. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2020-0139 · Cited by 38
3D Bioprinting of Nature-Inspired Hydrogel Inks Based on Synthetic Polymers
Kumar, S., Tharayil, A., & Thomas, S. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00567 · Cited by 38
Wattanaanek, N., Suttapreyasri, S., & Samruajbenjakun, B. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb13020047 · Cited by 36
Biomaterial and biocompatibility evaluation of tunicate nanocellulose for tissue engineering
Apelgren, P., Sämfors, S., Säljö, K., Mölne, J., Gatenholm, P., Troedsson, C., Thompson, E. M., & Kölby, L. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.212828 · Cited by 37
Self-citation3D-Printing of Silk Nanofibrils Reinforced Alginate for Soft Tissue Engineering
Mohammadpour, Z., Kharaziha, M., & Zarrabi, A. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15030763 · Cited by 37
“The increased modulus of these samples might be due to the structural entanglement, which could be originated from Pharmaceutics 2023, 15, 763 8 of 19 the strong interconnecting networks between carboxylic groups of alginate and amide groups of SNF. Markstedt et al. [15] reported a similar trend for the Alg-CNF hydrog…”
BackgroundInfluentialBiomaterials and Culture Technologies for Regenerative Therapy of Liver Tissue
Pérez, R. A., Jung, C., & Kim, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600791 · Cited by 37
Alginate, hyaluronic acid, and chitosan-based 3D printing hydrogel for cartilage tissue regeneration
Jang, E. J., Patel, R., Sankpal, N. V., Bouchard, L., & Patel, M. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112651 · Cited by 40
Bioink Temperature Influence on Shear Stress, Pressure and Velocity Using Computational Simulation
Gómez-Blanco, J. C., Sánchez, E. M., Marcos-Romero, A. C., Pacheco, M. M., Díaz-Parralejo, A., & Pagador, J. B. (2020) · Processes · doi:10.3390/pr8070865 · Cited by 40
Curvello, R., & Garnier, G. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c01510 · Cited by 35
Carrola, M., Asadi, A. A., Zhang, H., Papageorgiou, D. G., Bilotti, E., & Koerner, H. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202103334 · Cited by 37
An overview on the advantages and limitations of 3D printing of microneedles
Özyılmaz, E. D., Turan, A., & Çomoğlu, T. (2021) · Pharmaceutical Development and Technology · doi:10.1080/10837450.2021.1965163 · Cited by 36
“In the 3D application process, there are numerous formulations prepared with agarose, alginate, collagen, hyaluronic acid, and cellulose (Wu et al. 2011; Markstedt et al. 2015).”
BackgroundPolysaccharides-based nanofibrils: From tissue engineering to biosensor applications
Soroush, E., Mohammadpour, Z., Kharaziha, M., Bakhsheshi‐Rad, H. R., & Berto, F. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119670 · Cited by 37
Bacterial exopolysaccharides in drug delivery applications
Saha, I., & Datta, S. (2022) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2022.103557 · Cited by 40
Bi, H., Zhang, X., Wang, Q., Yong, Q., Xu, W., Xu, M., Xu, C., & Wang, X. (2023) · Industrial Crops and Products · doi:10.1016/j.indcrop.2023.117615 · Cited by 37
“…nanosized fibrils in the pristine gel or when forming a composite hydrogel with other classes of natural polymers, e.g. chitosan, alginate, or gelatin, etc. (Chinga-Carrasco and Syverud, 2014; Deng et al., 2021; Markstedt et al., 2015; Wang et al., 2022a; Xu et al., 2019a,2019b; You et al., 2021).”
BackgroundSeok, J. M., Oh, S. H., Lee, S. J., Lee, J. H., Kim, W. D., Park, S.-H., Nam, S. Y., Shin, H., & Park, S. A. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2018.09.013 · Cited by 37
Challenges in Three-Dimensional Printing of Bone Substitutes
Masaeli, R., Zandsalimi, K., Rasoulianboroujeni, M., & Tayebi, L. (2019) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2018.0381 · Cited by 38
“122 Several efforts have been made to fabricate blood vessels, 126–129 neuronal tissues, 130,131 liver, 132–134 skin, 40,135,136 cartilages, 137–140 and bones 117,141–145 through bioprinting.”
Reeser, K., & Doiron, A. L. (2019) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2019.0058 · Cited by 39
“19 This can be especially problematic for constructs containing voids, particularly tubular biological structures.”
3D bioprinting in tissue engineering and regenerative medicine
Gupta, S., & Bit, A. (2021) · Cell and Tissue Banking · doi:10.1007/s10561-021-09936-6 · Cited by 37
“addition of chondrocytes cells to fabricate cartilage tissue (Markstedt et al. 2015).”
BackgroundShape Fidelity of 3D-Bioprinted Biodegradable Patches
Temirel, M., Hawxhurst, C. J., & Taşoğlu, S. (2021) · Micromachines · doi:10.3390/mi12020195 · Cited by 36
“These results are in good agreement with previously reported rheological properties for CNC- and CNF-based bioinks [49,68].”
BackgroundMethodResultInfluentialWang, Q., Backman, O., Nuopponen, M., Xu, C., & Wang, X. (2021) · Frontiers in Chemical Engineering · doi:10.3389/fceng.2021.723429 · Cited by 41
Guo, J., Li, Q., Zhang, R., Li, B. J., Zhang, J., Yao, L., Lin, Z., Zhang, L., Cao, X., & Duan, B. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.1c01330 · Cited by 34
Avanzi, I. R., Parisi, J. R., de Souza, A., Cruz, M. D. A., Martignago, C. C. S., Ribeiro, D. A., Braga, A. R. C., & Rennó, A. C. M. (2022) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35134 · Cited by 36
Nanofibrillar cellulose-alginate hydrogel coated surgical sutures as cell-carrier systems
Laurén, P., Somersalo, P., Pitkänen, I., Lou, Y., Urtti, A. O., Partanen, J. P., Seppälä, J. V., Madetoja, M., Laaksonen, T., Mäkitie, A. A., et al. (2017) · PLoS ONE · doi:10.1371/journal.pone.0183487 · Cited by 37
“In addition, NFC hydrogel and alginate composition has been used in bioprinting [30], where it was reported that the addition of NFC improved the hydrogel structural fidelity, preventing the collapse of printed shapes.”
MethodDendrimer directed assembly of dicarboxylated hairy nanocellulose
Tavakolian, M., Lerner, J., Tovar, F. M., Frances, J., van de Ven, T. G. M., & Kakkar, A. K. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.01.100 · Cited by 36
Liu, Q., Jain, T., Peng, C., Peng, F., Narayanan, A., & Joy, A. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b02558 · Cited by 35
Yuan, R., Wu, K., & Fu, Q. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119784 · Cited by 36
Pan, R. L., Martyniak, K., Karimzadeh, M., Gelikman, D. G., DeVries, J., Sutter, K., Coathup, M. J., Razavi, M., Sawh-Martinez, R. F., & Kean, T. J. (2022) · Journal of Experimental Orthopaedics · doi:10.1186/s40634-022-00518-3 · Cited by 39
“Such MSC-containing structures can differentiate into cartilage and bone, commonly progressing to hypertrophy thereby acting as a template for endogenous osteogenesis [121, 133].”
Three-dimensional bioprinting is not only about cell-laden structures
Zhang, H., Xing, T., Yin, R.-X., Shi, Y., Yang, S.-M., & Zhang, W.-J. (2016) · Chinese Journal of Traumatology · doi:10.1016/j.cjtee.2016.06.007 · Cited by 36
3D Bioprinting of Artificial Tissues: Construction of Biomimetic Microstructures
Luo, Y., Lin, X., & Huang, P. (2018) · Macromolecular Bioscience · doi:10.1002/mabi.201800034 · Cited by 33
3D‐Printed Anisotropic Nanofiber Composites with Gradual Mechanical Properties
Lackner, F., Knechtl, I., Novak, M., Nagaraj, C., Štiglic, A. D., Kargl, R., Olschewski, A., Kleinschek, K. S., & Mohan, T. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201708 · Cited by 32
Advancements in Cartilage Tissue Engineering: A Focused Review
Welsh, B. L., & Sikder, P. (2025) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35520 · Cited by 34
Chemically Modified Alginate-Based Hydrogel-Matrices in Drug Delivery
Román‐Guerrero, A., Cortés‐Camargo, S., Alpizar-Reyes, E., Fabela-Morón, M. F., Cruz-Olivares, J., Velázquez-Gutiérrez, S. K., & Pérez‐Alonso, C. (2025) · Macromol—A Journal of Macromolecular Research · doi:10.3390/macromol5030036 · Cited by 36
Cellulose Nanofibrils-based Hydrogels for Biomedical Applications: Progresses and Challenges
Liu, H., Liu, K., Han, X., Xie, H., Si, C., Liu, W., & Bae, Y. (2020) · Current Medicinal Chemistry · doi:10.2174/0929867327666200303102859 · Cited by 33
Wenger, L., Radtke, C. P., Göpper, J., Wörner, M., & Hubbuch, J. J. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00713 · Cited by 34
“Strategies to enhance printability include improving the rheological properties of the ink by the addition of viscosityenhancing additives (Markstedt et al., 2015; Schmieg et al., 2018) or by pre-crosslinking (Skardal et al.”
BackgroundGuan, J., Yuan, F., Mao, Z., Zhu, H., Lin, L., Chen, H. H., & Yu, J. (2021) · Polymers · doi:10.3390/polym13132146 · Cited by 34
3D Printed Nanocellulose Scaffolds as a Cancer Cell Culture Model System
Rosendahl, J., Svanström, A., Berglin, M., Petronis, Š., Bogestål, Y. R., Stenlund, P., Standoft, S., Ståhlberg, A., Landberg, G., Chinga‐Carrasco, G., et al. (2021) · Bioengineering · doi:10.3390/bioengineering8070097 · Cited by 34
Non-Invasive Three-Dimensional Cell Analysis in Bioinks by Raman Imaging
Marzi, J., Fuhrmann, E., Brauchle, E., Singer, V., Pfannstiel, J., Schmidt, I., & Hartmann, H. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c24463 · Cited by 35
Progress in bioprinting technology for tissue regeneration
Sabzevari, A., Pisheh, H. R., Ansari, M., & Salati, A. (2023) · Journal of Artificial Organs · doi:10.1007/s10047-023-01394-z · Cited by 32
“Likewise, Markstedt et al. [144] advanced a new nanocellulose-alginate bio-ink with advantageous printing properties (Fig.”
BackgroundEvolution of bioprinting and current applications
Mendoza-Cerezo, L., Rodríguez-Rego, J. M., Macías-García, A., Marcos-Romero, A. C., & Díaz-Parralejo, A. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.742 · Cited by 41
Joas, S., Tovar, G. E. M., Celik, O., Bonten, C., & Southan, A. (2018) · Gels · doi:10.3390/gels4030069 · Cited by 32
3D bioprinting of vascular conduits for pediatric congenital heart repairs
Lee, W., Hong, Y., & Dai, G. (2019) · Translational research · doi:10.1016/j.trsl.2019.03.007 · Cited by 31
Marchetti, L., Andrés, S. C., Cerruti, P., & Califano, A. N. (2019) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2019.105315 · Cited by 31
Hydrogel-Colloid Composite Bioinks for Targeted Tissue-Printing
Michel, R., & Auzély‐Velty, R. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00305 · Cited by 34
Berglund, L., Rakar, J., Junker, J. P. E., Forsberg, F., & Oksman, K. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00920 · Cited by 31
Amr, M. M., Dykes, I., Counts, M., Kernan, J., Mallah, A. H., Mendenhall, J., Wie, B. V., Abu‐Lail, N. I., & Gozen, B. A. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00133 · Cited by 33
Design of a Waterborne Polyurethane–Urea Ink for Direct Ink Writing 3D Printing
Vadillo, J., Larraza, I., Calvo‐Correas, T., Gabilondo, N., Dérail, C., & Eceiza, A. (2021) · Materials · doi:10.3390/ma14123287 · Cited by 31
“This behavior was also observed in the literature for other materials [10,30,31] and represents an important property for obtaining printable materials.”
BackgroundReakasame, S., Dranseike, D., Schrüfer, S., Zheng, K., Schubert, D. W., & Boccaccini, A. R. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112336 · Cited by 33
Carvalho, D. N., Reis, R. L., & Silva, T. H. (2021) · Biomaterials Science · doi:10.1039/d1bm00809a · Cited by 31
Rastin, H., Mansouri, N., Tùng, T. T., Hassan, K., Mazinani, A., Ramezanpour, M., Yap, P. L., Yu, L., Vreugde, S., & Lošić, D. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101439 · Cited by 36
Bioprinting Au Natural: The Biologics of Bioinks
Willson, K., Atala, A., & Yoo, J. J. (2021) · Biomolecules · doi:10.3390/biom11111593 · Cited by 34
“Nanofibrillated cellulose has been combined with human chondrocytes and alginate to develop tissue-engineered ears, with the cellulose improving shape fidelity and printing resolution compared to pure alginate [42].”
MethodBednarzig, V., Schrüfer, S., Schneider, T. C., Schubert, D. W., Detsch, R., & Boccaccini, A. R. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23094750 · Cited by 34
“Commonly used filler materials include cellulose nanofibers [23,24] or inorganic filler particles such as bioactive glass (BG) [25,26], hydroxyapatite [27] or metallic particles such as gold nano particles [28].”
BackgroundSemba, J. A., Mieloch, A. A., Tomaszewska, E., Cywoniuk, P., & Rybka, J. D. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v9i1.621 · Cited by 31
Kraut, G., Yenchesky, L., Prieto, F., Tovar, G. E. M., & Southan, A. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45083 · Cited by 31
Modified bionanocellulose for bioactive wound-healing dressing
Rojewska, A., Karewicz, A., Boczkaja, K., Wolski, K., Kępczyński, M., Zapotoczny, S., & Nowakowska, M. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.09.010 · Cited by 31
Rheological studies on nanocrystalline cellulose/alginate suspensions
Junior, E. A. P., Dávila, J. L., & d’Ávila, M. A. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.12.091 · Cited by 31
Rossi, S., Porta, R., Brenna, D., Puglisi, A., & Benaglia, M. (2017) · Angewandte Chemie · doi:10.1002/ange.201612192 · Cited by 31
A comparative analysis of pulp-derived nanocelluloses for 3D bioprinting facial cartilages
Jovic, T. H., Nicholson, T., Arora, H., Nelson, K., Doak, S. H., & Whitaker, I. S. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121261 · Cited by 31
Ramezani, G., Stiharu, I. G., van de Ven, T. G. M., & Nerguizian, V. (2024) · Journal of Functional Biomaterials · doi:10.3390/jfb15040093 · Cited by 32
Emerging Cellulose-Based Nanomaterials and Nanocomposites
Sheikhi, A. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-814615-6.00009-6 · Cited by 37
Biomedical Applications of Additive Manufacturing
Dhavalikar, P., Lan, Z., Kar, R., Salhadar, K., Gaharwar, A. K., & Cosgriff‐Hernandez, E. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-816137-1.00040-4 · Cited by 33
Photopolymerizable pullulan: Synthesis, self-assembly and inkjet printing
Mugnaini, G., Resta, C., Poggi, G., & Bonini, M. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.02.074 · Cited by 30
Vadillo, J., Larraza, I., Calvo‐Correas, T., Gabilondo, N., Dérail, C., & Eceiza, A. (2021) · Cellulose · doi:10.1007/s10570-021-03826-6 · Cited by 31
“Some authors proposed CNF in order to reinforce an alginate based bio-ink, obtaining an improvement of the shape fidelity as well as the apparition of the shear-thinning behavior (Markstedt et al. 2015).”
BackgroundCernencu, A. I., Dinu, A. I., Stancu, I., Lungu, A., & Iovu, H. (2022) · Biotechnology and Bioengineering · doi:10.1002/bit.28020 · Cited by 30
Mishra, P. K., Pavelek, O., Rašticová, M., Mishra, H., & Ekielski, A. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.789603 · Cited by 30
Eze, F. N., Ovatlarnporn, C., Jayeoye, T. J., Nalinbenjapun, S., & Sripetthong, S. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.02.140 · Cited by 30
An Insight of Nanomaterials in Tissue Engineering from Fabrication to Applications
Sharma, R., Kumar, S., Bhawna, Gupta, A., Dheer, N., Jain, P., Singh, P., & Kumar, V. (2022) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-022-00459-z · Cited by 30
“ores and using the freeze-drying method [88] for networked micropores [14, 89, 90].”
MethodSahranavard, M., Sarkari, S., Safavi, S., & Ghorbani, F. (2022) · PubMed Central · doi:10.12336/biomatertransl.2022.02.004 · Cited by 51
Magnetic bioprinting of stem cell-based tissues
de Walle, A. V., Perez, J. E., & Wilhelm, C. (2022) · Bioprinting · doi:10.1016/j.bprint.2023.e00265 · Cited by 30
Gelinsky, M. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-101103-4.00008-9 · Cited by 39
Bioprinting of Human Musculoskeletal Interface
Luo, W., Liu, H., Wang, C., Qin, Y., Liu, Q., & Wang, J. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900019 · Cited by 30
Piezoelectric inkjet printing: The principles, fluid dynamics challenges, and applications
Zhang, J., Zhu, H., Liu, D., Li, Y., & Huang, C. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.110866 · Cited by 29
Peregrino, V. M. A., Tenorio-Barajas, A. Y., Mendoza‐Barrera, C., Román-Doval, J., Lavariega-Sumano, E. F., Torres-Arellanes, S. P., & Román‐Doval, R. (2025) · Bioengineering · doi:10.3390/bioengineering12090936 · Cited by 36
Biomimetic bioinks of nanofibrillar polymeric hydrogels for 3D bioprinting
Wang, Y., Li, J., Li, Y., & Yang, B. (2021) · Nano Today · doi:10.1016/j.nantod.2021.101180 · Cited by 35
Dimaraki, A., Díaz‐Payno, P. J., Minneboo, M., Nouri‐Goushki, M., Hosseini, M., Kops, N., Narcisi, R., Mirzaali, M. J., van Osch, G. J. V. M., Fratila-Apachitei, L. E., et al. (2021) · Applied Sciences · doi:10.3390/app11177821 · Cited by 29
Non-destructive mechanical assessment for optimization of 3D bioprinted soft tissue scaffolds
Godau, B., Stefanek, E., Gharaie, S. S., Amereh, M., Pagan, E., Marvdashti, Z., Libert-Scott, E., Ahadian, S., & Akbari, M. (2022) · iScience · doi:10.1016/j.isci.2022.104251 · Cited by 29
“Commercially available Cellink Bioink was used for this study for its demonstrated printability, biocompatibility, and ability to host encapsulated cells through the bioprinting process (Markstedt et al., 2015; Martı́nez Ávila et al., 2016; Bojin et al., 2021).”
MethodTemperature‐Mediated Microfluidic Extrusion of Structurally Anisotropic Hydrogels
Khuu, N., Alizadehgiashi, M., Gevorkian, A., Galati, E., Yan, N., & Kumacheva, E. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800627 · Cited by 29
Extrusion-Based Bioprinting: Current Standards and Relevancy for Human-Sized Tissue Fabrication
Willson, K., Ke, D., Kengla, C., Atala, A., & Murphy, S. V. (2020) · Methods in molecular biology · doi:10.1007/978-1-0716-0520-2_5 · Cited by 33
Dynamic bioinks for tissue/organ bioprinting: Principle, challenge, and perspective
Ma, D., Lu, W. W., Liu, W., Liu, W., & Ruan, C. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101527 · Cited by 31
Bioinks for bioprinting functional meniscus and articular cartilage
Critchley, S. E., & Kelly, D. J. (2017) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2017-0012 · Cited by 32
Metadata
- Authors
- Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P.
- Affiliations
- Wallenberg Wood Science Center (SE)
- Wallenberg Wood Science Center and ‡Biopolymer Technology, Department of Chemical and Biological Engineering, Chalmers University of Technology, Gothenburg 412 96, Sweden
- Corresponding author
- Gatenholm, Paul
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-04-07
- Volume
- 16
- Issue
- 5
- Pages
- 1489-1496
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1994903148
- Cited by
- 1,528
- References
- 39
- Citations by year
- 2026: 64 · 2025: 90 · 2024: 116 · 2023: 151 · 2022: 198 · 2021: 204 · 2020: 198 · 2019: 177 · 2018: 147 · 2017: 99 · 2016: 73 · 2015: 9
- FWCI
- 54.39
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Chalmers Research (Chalmers University of Technology) (submittedVersion)
- Funders
- European Commission
- VINNOVA
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- 3D bioprinting, human chondrocytes, cartilage tissue engineering, nanocellulose, alginate, bioinks, cellulose nanofibers, shear thinning, hydrogels, meniscus, auricular cartilage, cell viability, shape fidelity
- MeSH terms
- Alginates, Animals, Cartilage, Cellulose, Hexuronic Acids, Humans, Chondrocytes, Hydrogel, Polyethylene Glycol Dimethacrylate, Glucuronic Acid, Tissue Engineering, Regenerative Medicine, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.