3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications
The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Abstract
The introduction of 3D bioprinting is expected to revolutionize the field of tissue engineering and regenerative medicine. The 3D bioprinter is able to dispense materials while moving in X, Y, and Z directions, which enables the engineering of complex structures from the bottom up. In this study, a bioink that combines the outstanding shear thinning properties of nanofibrillated cellulose (NFC) with the fast cross-linking ability of alginate was formulated for the 3D bioprinting of living soft tissue with cells. Printability was evaluated with concern to printer parameters and shape fidelity. The shear thinning behavior of the tested bioinks enabled printing of both 2D gridlike structures as well as 3D constructs. Furthermore, anatomically shaped cartilage structures, such as a human ear and sheep meniscus, were 3D printed using MRI and CT images as blueprints. Human chondrocytes bioprinted in the noncytotoxic, nanocellulose-based bioink exhibited a cell viability of 73% and 86% after 1 and 7 days of 3D culture, respectively. On the basis of these results, we can conclude that the nanocellulose-based bioink is a suitable hydrogel for 3D bioprinting with living cells. This study demonstrates the potential use of nanocellulose for 3D bioprinting of living tissues and organs.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [28]
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Alginate Hydrogels as Biomaterials
Augst, A. D., Kong, H. J., & Mooney, D. J. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600069 · Cited by 1,839
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Bacterial cellulose as a potential scaffold for tissue engineering of cartilage
Svensson, A., Nicklasson, E., Harrah, T., Panilaitis, B., Kaplan, D. L., Brittberg, M., & Gatenholm, P. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.049 · Cited by 1,026
Self-citationSurface engineering approaches to micropattern surfaces for cell-based assays
Falconnet, D., Csucs, G., Michelle Grandin, H., & Textor, M. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.024 · Cited by 944
Wågberg, L., Decher, G., Norgren, M., Lindström, T., Ankerfors, M., & Axnäs, K. (2008) · Langmuir · doi:10.1021/la702481v · Cited by 867
Research works printed but not linked: 1
- Wågberg L., 1987, Colloids Surf., 27, 163, 10.1016/0166-6622(87)80335-9 · doi:10.1016/0166-6622(87)80335-9 · Paper page
Cited by
Items 101–200 of 1,001
Harito, C., Bavykin, D. V., Yuliarto, B., Dipojono, H. K., & Walsh, F. C. (2019) · Nanoscale · doi:10.1039/c9nr00117d · Cited by 287
Printability–A key issue in extrusion-based bioprinting
Naghieh, S., & Chen, X. (2021) · Journal of Pharmaceutical Analysis · doi:10.1016/j.jpha.2021.02.001 · Cited by 270
Alginate: Enhancement Strategies for Advanced Applications
Hurtado, A., Aljabali, A. A. A., Mishra, V., Tambuwala, M. M., & Serrano-Aroca, Á. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23094486 · Cited by 275
Martínez Ávila, H., Schwarz, S., Rotter, N., & Gatenholm, P. (2016) · Bioprinting · doi:10.1016/j.bprint.2016.08.003 · Cited by 282
“Recently we developed bioinks with varying ratios of nanocellulose and alginate, which show remarkable printability and offer a biologically relevant 3D environment [35].”
MethodSelf-citation3D printed scaffolds with gradient porosity based on a cellulose nanocrystal hydrogel
Sultan, S., & Mathew, A. P. (2018) · Nanoscale · doi:10.1039/c7nr08966j · Cited by 285
3D Bioprinting of Human Tissues: Biofabrication, Bioinks, and Bioreactors
Zhang, J., Wehrle, E., Rubert, M., & Müller, R. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22083971 · Cited by 257
“The gelation processes of bioink will sometimes include several crosslinking mechanisms to print stable and complex scaffolds [65,66].”
BackgroundDe France, K., Zeng, Z., Wu, T., & Nyström, G. (2021) · Advanced Materials · doi:10.1002/adma.202000657 · Cited by 289
Advances and Future Perspectives in 4D Bioprinting
Ashammakhi, N., Ahadian, S., Zengjie, F., Suthiwanich, K., Lorestani, F., Orive, G., Ostrovidov, S., & Khademhosseini, A. (2018) · Biotechnology Journal · doi:10.1002/biot.201800148 · Cited by 270
Cellulose nanomaterials: new generation materials for solving global issues
Mokhena, T. C., & John, M. J. (2020) · Cellulose · doi:10.1007/s10570-019-02889-w · Cited by 269
“…and cellulose nanomaterial-based composites has revealed that different functionalized shapes towards tissue/organ repair or regeneration can be fabricated as attested by a number of patents and press releases published in the context of 3Dprinting (McAlpine 2016; Markstedt et al. 2015).”
BackgroundInfluentialYu, S., Sun, J., Shi, Y., Wang, Q., Wu, J., & Liu, J. (2021) · Environmental Science and Ecotechnology · doi:10.1016/j.ese.2020.100077 · Cited by 269
Natural Hydrogel-Based Bio-Inks for 3D Bioprinting in Tissue Engineering: A Review
Fatimi, A., Okoro, O. V., Podstawczyk, D., Siminska-Stanny, J., & Shavandi, A. (2022) · Gels · doi:10.3390/gels8030179 · Cited by 276
Direct Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures
Li, V. C.-F., Dunn, C. K., Zhang, Z., Deng, Y., & Qi, H. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-07771-y · Cited by 269
A review on fabricating tissue scaffolds using vat photopolymerization
Chartrain, N. A., Williams, C. B., & Whittington, A. R. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.05.010 · Cited by 253
Khalid, M. Y., Al Rashid, A., Arif, Z. U., Ahmed, W., & Arshad, H. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.128 · Cited by 260
A review on 3D printed matrix polymer composites: its potential and future challenges
Saroia, J., Wang, Y., Wei, Q., Lei, M., Li, X., Guo, Y., & Zhang, K. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04534-z · Cited by 253
Bioinks and bioprinting: A focused review
Mobaraki, M., Ghaffari, M., Yazdanpanah, A., Luo, Y., & Mills, D. K. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00080 · Cited by 258
Xu, W., Molino, B. Z., Cheng, F., Molino, P. J., Yue, Z., Su, D., Wang, X., Willför, S., Xu, C., & Wallace, G. G. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b21268 · Cited by 263
Physical and Chemical Factors Influencing the Printability of Hydrogel-based Extrusion Bioinks
Lee, S. C., Gillispie, G., Prim, P., & Lee, S. J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00015 · Cited by 255
Polymeric Systems for Bioprinting
Bedell, M. L., Navara, A. M., Du, Y., Zhang, S., & Mikos, A. G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00834 · Cited by 258
3D printing of hydrogel composite systems: Recent advances in technology for tissue engineering
Jang, T.-S., Jung, H.-D., Pan, H. M., Han, W. T., Chen, S., & Song, J. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.v4i1.126 · Cited by 251
“investigated 3D printing materials for cartilage tissue engineering applications by combining alginate and nanofibrillated cellulose([73]).”
BackgroundMethodAdditive manufacturing technologies: Industrial and medical applications
Rouf, S., Malik, A., Singh, N., Raina, A., Naveed, N., Siddiqui, M. I. H., & Haq, M. I. U. (2022) · Sustainable Operations and Computers · doi:10.1016/j.susoc.2022.05.001 · Cited by 227
Biobased Nanomaterials─The Role of Interfacial Interactions for Advanced Materials
Österberg, M., Henn, K. A., Farooq, M., & Valle-Delgado, J. J. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00492 · Cited by 238
Bio-based materials with novel characteristics for tissue engineering applications – A review
Bedian, L., Villalba-Rodríguez, A. M., Hernández-Vargas, G., Parra-Saldivar, R., & Iqbal, H. M. N. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.02.048 · Cited by 249
Three-Dimensional Printing of Wood-Derived Biopolymers: A Review Focused on Biomedical Applications
Xu, W., Wang, X., Sandler, N., Willför, S., & Xu, C. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03924 · Cited by 248
Synthesis and Characterization of Types A and B Gelatin Methacryloyl for Bioink Applications
Lee, B., Lum, N., Seow, L., Lim, P., & Tan, L. (2016) · Materials · doi:10.3390/ma9100797 · Cited by 243
“Examples of typical bioink materials are alginate [20], gelatin [21], and gelatin methacryloyl [16,22,23].”
BackgroundRadhakrishnan, J., Subramanian, A., Krishnan, U. M., & Sethuraman, S. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.6b01619 · Cited by 244
Extrusion bioprinting: Recent progress, challenges, and future opportunities
Ramesh, S., Harrysson, O. L. A., Rao, P. K., Tamayol, A., Cormier, D. R., Zhang, Y., & Rivero, I. V. (2021) · Bioprinting · doi:10.1016/j.bprint.2020.e00116 · Cited by 243
3D Bioprinting Using Cross-Linker-Free Silk–Gelatin Bioink for Cartilage Tissue Engineering
Singh, Y. P., Bandyopadhyay, A., & Mandal, B. B. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b11644 · Cited by 245
Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication
Jiang, T., Munguia-Lopez, J. G., Flores-Torres, S., Kort-Mascort, J., & Kinsella, J. M. (2019) · Applied Physics Reviews · doi:10.1063/1.5059393 · Cited by 243
3D bioprinting of BM-MSCs-loaded ECM biomimetic hydrogels for in vitro neocartilage formation
Costantini, M., Idaszek, J., Szöke, K., Jaroszewicz, J., Dentini, M., Barbetta, A., Brinchmann, J. E., & Święszkowski, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035002 · Cited by 250
3D bioprinting and its in vivo applications
Hong, N., Yang, G., Lee, J., & Kim, G. (2018) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33826 · Cited by 243
3D printing of complex GelMA-based scaffolds with nanoclay
Gao, Q., Niu, X., Shao, L., Zhou, L., Lin, Z., Sun, A., Fu, J., Chen, Z., Hu, J., Liu, Y., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab0cf6 · Cited by 242
Advances in 3D bioprinting of tissues/organs for regenerative medicine and in-vitro models
Jain, P., Kathuria, H., & Dubey, N. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121639 · Cited by 237
Synthesis, properties, and applications of polylactic acid‐based polymers
Ramezani Dana, H., & Ebrahimi, F. (2023) · Polymer Engineering & Science · doi:10.1002/pen.26193 · Cited by 217
Responsive cellulose-hydrogel composite ink for 4D printing
Mulakkal, M. C., Trask, R. S., Ting, V. P., & Seddon, A. M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.009 · Cited by 238
“3 wt% of water content for MFC and NFC in hydrogel [19,28].”
BackgroundMethodZhai, X., Ma, Y., Hou, C., Gao, F., Zhang, Y., Ruan, C., Pan, H., Lu, W. W., & Liu, W. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00224 · Cited by 243
Functional Polymers and Nanocomposites for 3D Printing of Smart Structures and Devices
Nadgorny, M., & Ameli, A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01786 · Cited by 244
Nanocellulose‐Based Functional Materials: From Chiral Photonics to Soft Actuator and Energy Storage
Lv, P., Lu, X., Wang, L., & Feng, W. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104991 · Cited by 242
3D bioprinting and the current applications in tissue engineering
Huang, Y., Zhang, X., Gao, G., Yonezawa, T., & Cui, X. (2017) · Biotechnology Journal · doi:10.1002/biot.201600734 · Cited by 240
“In addition, alginate mixed with nanocellulose was also used to print auricular cartilage and meniscus constructs [30, 48].”
BackgroundMethod3D Bioprinting of Self‐Standing Silk‐Based Bioink
Zheng, Z., Wu, J., Liu, M., Wang, H., Li, C., Rodriguez, M. J., Li, G., Wang, X., & Kaplan, D. L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701026 · Cited by 241
Status and future scope of plant-based green hydrogels in biomedical engineering
Mohammadinejad, R., Maleki, H., Larrañeta, E., Fajardo, A. R., Nik, A. B., Shavandi, A., Sheikhi, A., Ghorbanpour, M., Farokhi, M., Govindh, P., et al. (2019) · Applied Materials Today · doi:10.1016/j.apmt.2019.04.010 · Cited by 237
CelloMOF: Nanocellulose Enabled 3D Printing of Metal–Organic Frameworks
Sultan, S., Abdelhamid, H. N., Zou, X., & Mathew, A. P. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805372 · Cited by 240
Recent Trends in Decellularized Extracellular Matrix Bioinks for 3D Printing: An Updated Review
Dzobo, K., Motaung, K. S. C. M., & Adesida, A. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20184628 · Cited by 231
Sustainable cellulose and its derivatives for promising biomedical applications
Cheng, W., Zhu, Y., Jiang, G., Cao, K., Zeng, S., Chen, W., Zhao, D., & Yu, H. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101152 · Cited by 232
Freeman, F. E., Pitacco, P., van Dommelen, L. H. A., Nulty, J., Browe, D. C., Shin, J.-Y., Alsberg, E., & Kelly, D. J. (2020) · Science Advances · doi:10.1126/sciadv.abb5093 · Cited by 228
Malekpour, A., & Chen, X. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb13020040 · Cited by 206
Additive manufacturing of sustainable biomaterials for biomedical applications
Arif, Z. U., Khalid, M. Y., Noroozi, R., Hossain, M., Shi, H. H., Tariq, A., Ramakrishna, S., & Umer, R. (2023) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2023.100812 · Cited by 223
Natural Biomaterials and Their Use as Bioinks for Printing Tissues
Benwood, C., Chrenek, J., Kirsch, R. L., Masri, N. Z., Richards, H., Teetzen, K., & Willerth, S. M. (2021) · Bioengineering · doi:10.3390/bioengineering8020027 · Cited by 219
Advanced Flexible Materials from Nanocellulose
Chen, Z., Hu, Y., Shi, G., Zhuo, H., Ali, M. A., Jamróz, E., Zhang, H., Zhong, L., & Peng, X. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214245 · Cited by 229
3D bioprinting and its innovative approach for biomedical applications
Tripathi, S., Mandal, S. S., Bauri, S., & Maiti, P. (2023) · MedComm · doi:10.1002/mco2.194 · Cited by 206
Ferreira, F. V., Otoni, C. G., De France, K. J., Barud, H. S., Lona, L. M. F., Cranston, E. D., & Rojas, O. J. (2020) · Materials Today · doi:10.1016/j.mattod.2020.03.003 · Cited by 222
Extrusion and Microfluidic‐Based Bioprinting to Fabricate Biomimetic Tissues and Organs
Davoodi, E., Sarikhani, E., Montazerian, H., Ahadian, S., Costantini, M., Swieszkowski, W., Willerth, S. M., Walus, K., Mofidfar, M., Toyserkani, E., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201901044 · Cited by 213
Abouzeid, R. E., Khiari, R., Beneventi, D., & Dufresne, A. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01325 · Cited by 222
Evaluation of bioink printability for bioprinting applications
Zhang, Z., Jin, Y., Yin, J., Xu, C., Xiong, R., Christensen, K., Ringeisen, B. R., Chrisey, D. B., & Huang, Y. (2018) · Applied Physics Reviews · doi:10.1063/1.5053979 · Cited by 214
Resilient living materials built by printing bacterial spores
González, L. M., Mukhitov, N., & Voigt, C. A. (2020) · Nature Chemical Biology · doi:10.1038/s41589-019-0412-5 · Cited by 224
Poly lactic acid (PLA) polymers: from properties to biomedical applications
Ebrahimi, F., & Ramezani Dana, H. (2022) · International Journal of Polymeric Materials and Polymeric Biomaterials · doi:10.1080/00914037.2021.1944140 · Cited by 214
Recent advances in stem cell therapeutics and tissue engineering strategies
Kwon, S. G., Kwon, Y. W., Lee, T. W., Park, G. T., & Kim, J. H. (2018) · Biomaterials Research · doi:10.1186/s40824-018-0148-4 · Cited by 215
“In one study, nanofibrillated cellulose plus alginate were used as scaffolds for making ears formed with a 3D printer, and the survival rate of chondrocytes in the scaffolds after transplantation was 73 to 86% [67].”
MethodWang, Z., An, G., Zhu, Y., Liu, X., Chen, Y., Wu, H., Wang, Y., Shi, X., & Mao, C. (2019) · Materials Horizons · doi:10.1039/c8mh01208c · Cited by 218
Nanocellulose Production: Exploring the Enzymatic Route and Residues of Pulp and Paper Industry
Michelin, M., Gomes, D. G., Romaní, A., Polizeli, M. D. L. T. M., & Teixeira, J. A. (2020) · Molecules · doi:10.3390/molecules25153411 · Cited by 205
Recent Advancement of Biopolymers and Their Potential Biomedical Applications
Biswas, M. C., Jony, B., Nandy, P. K., Chowdhury, R. A., Halder, S., Kumar, D., Ramakrishna, S., Hassan, M., Ahsan, M. A., Hoque, M. E., et al. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02199-y · Cited by 202
“1 3 developed human chondrocytes scaffold via a 3D bioprinting technique using alginate and nanofibrillated cellulose (NFC) hybrid hydrogel for soft tissue application [156].”
MethodFibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles
Choi, S., Lee, K. Y., Kim, S. L., MacQueen, L. A., Chang, H., Zimmerman, J. F., Jin, Q., Peters, M. M., Ardoña, H. A. M., Liu, X., et al. (2023) · Nature Materials · doi:10.1038/s41563-023-01611-3 · Cited by 212
3D bioprinting of liver-mimetic construct with alginate/cellulose nanocrystal hybrid bioink
Wu, Y., Lin, Z. Y. (., Wenger, A. C., Tam, K. C., & Tang, X. (. (2018) · Bioprinting · doi:10.1016/j.bprint.2017.12.001 · Cited by 207
3D printing of nano-cellulosic biomaterials for medical applications
Sultan, S., Siqueira, G., Zimmermann, T., & Mathew, A. P. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.06.002 · Cited by 202
3D Printing and Electrospinning of Composite Hydrogels for Cartilage and Bone Tissue Engineering
De Mori, A., Peña Fernández, M., Blunn, G., Tozzi, G., & Roldo, M. (2018) · Polymers · doi:10.3390/polym10030285 · Cited by 206
Kim, B. S., Kim, H., Gao, G., Jang, J., & Cho, D.-W. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7e98 · Cited by 206
Printability in extrusion bioprinting
Fu, Z., Naghieh, S., Xu, C., Wang, C., Sun, W., & Chen, X. (2021) · Biofabrication · doi:10.1088/1758-5090/abe7ab · Cited by 196
“The printed cell-incorporated constructs have found wide applications in tissue engineering [2], regenerative medicine [3], drug delivery [4], and building in vitro disease models for drug screening [5].”
Regenerative medicine, organ bioengineering and transplantation
Edgar, L., Pu, T., Porter, B., Aziz, J. M., La Pointe, C., Asthana, A., & Orlando, G. (2020) · British Journal of Surgery · doi:10.1002/bjs.11686 · Cited by 196
Evaluation of bioprinter technologies
Ozbolat, I. T., Moncal, K. K., & Gudapati, H. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2016.10.003 · Cited by 202
“chondrocytes) [58] + Printing materials”
Thiol–Ene Alginate Hydrogels as Versatile Bioinks for Bioprinting
Ooi, H. W., Mota, C., ten Cate, A. T., Calore, A., Moroni, L., & Baker, M. B. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00696 · Cited by 198
3D Bioprinted cancer models: Revolutionizing personalized cancer therapy
Augustine, R., Kalva, S. N., Ahmad, R., Zahid, A. A., Hasan, S., Nayeem, A., McClements, L., & Hasan, A. (2021) · Translational Oncology · doi:10.1016/j.tranon.2021.101015 · Cited by 195
Silk‐Based Bioinks for 3D Bioprinting
Chawla, S., Midha, S., Sharma, A., & Ghosh, S. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701204 · Cited by 200
Mancha Sánchez, E., Gómez-Blanco, J. C., López Nieto, E., Casado, J. G., Macías-García, A., Díaz Díez, M. A., Carrasco-Amador, J. P., Torrejón Martín, D., Sánchez-Margallo, F. M., & Pagador, J. B. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00776 · Cited by 185
Sustainable Cellulose-Nanofiber-Based Hydrogels
Guan, Q.-F., Yang, H.-B., Han, Z.-M., Ling, Z.-C., Yin, C.-H., Yang, K.-P., Zhao, Y.-X., & Yu, S.-H. (2021) · ACS Nano · doi:10.1021/acsnano.1c01247 · Cited by 203
Shahbazi, M., & Jäger, H. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c01379 · Cited by 189
3D Bioprinting: A Novel Avenue for Manufacturing Tissues and Organs
Zhang, B., Gao, L., Ma, L., Luo, Y., Yang, H., & Cui, Z. (2019) · Engineering · doi:10.1016/j.eng.2019.03.009 · Cited by 195
“Nanofibrillated cellulose [61,97,104] and PLA nanofibers [72] have been combined with cell-laden alginate hydrogel to improve cell density and reinforce the mechanical strength.”
MethodCellulose-Based Nanomaterials Advance Biomedicine: A Review
Abdelhamid, H. N., & Mathew, A. P. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23105405 · Cited by 186
“Cellulose bioink showed 73% and 86% high cell viability after 1 and 7 days, respectively [280].”
Agarose-Based Hydrogels as Suitable Bioprinting Materials for Tissue Engineering
López-Marcial, G. R., Zeng, A. Y., Osuna, C., Dennis, J., García, J. M., & O’Connell, G. D. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00903 · Cited by 196
Improving 3D/4D printing characteristics of natural food gels by novel additives: A review
Chen, Y., Zhang, M., Sun, Y., & Phuhongsung, P. (2022) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2021.107160 · Cited by 195
Spatially and temporally controlled hydrogels for tissue engineering
Leijten, J., Seo, J., Yue, K., Trujillo-de Santiago, G., Tamayol, A., Ruiz-Esparza, G. U., Shin, S. R., Sharifi, R., Noshadi, I., Álvarez, M. M., et al. (2017) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2017.07.001 · Cited by 192
Biodegradable Polymers for Biomedical Additive Manufacturing
Puppi, D., & Chiellini, F. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100700 · Cited by 191
Three-Dimensional Printing in Plastic and Reconstructive Surgery: A Systematic Review
Bauermeister, A. J., Zuriarrain, A., & Newman, M. I. (2016) · Annals of Plastic Surgery · doi:10.1097/sap.0000000000000671 · Cited by 189
“Researchers are broadening their work toward constructing other cartilaginous structures, such as joints, trachea, spine, and nose, with more recent research expanding to the successful use of human chondrocytes.(77) Safety and efficacy tests that are currently underwaymust first be completed before the first human tr…”
BackgroundWei, Q., Zhou, J., An, Y., Li, M., Zhang, J., & Yang, S. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123450 · Cited by 184
Zhu, W., Cui, H., Boualam, B., Masood, F., Flynn, E., Rao, R. D., Zhang, Z.-Y., & Zhang, L. G. (2018) · Nanotechnology · doi:10.1088/1361-6528/aaafa1 · Cited by 186
Xu, C., Zhang Molino, B., Wang, X., Cheng, F., Xu, W., Molino, P., Bacher, M., Su, D., Rosenau, T., Willför, S., et al. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb01757c · Cited by 186
3D Printing of Dual-Physical Cross-linking Hydrogel with Ultrahigh Strength and Toughness
Jiang, P., Lin, P., Yang, C., Qin, H., Wang, X., & Zhou, F. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c02941 · Cited by 187
Augustine, R. (2018) · Progress in Biomaterials · doi:10.1007/s40204-018-0087-0 · Cited by 184
“Materials currently used in the bioprinting are mainly based on natural polymers like alginate (Markstedt et al. 2015), gelatine (Bertassoni et al.”
BackgroundBiological Material Interfaces as Inspiration for Mechanical and Optical Material Designs
Ren, J., Wang, Y., Yao, Y., Wang, Y., Fei, X., Qi, P., Lin, S., Kaplan, D. L., Buehler, M. J., & Ling, S. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00416 · Cited by 182
Recent advances in 3D printing of tough hydrogels: A review
Zhang, X. N., Zheng, Q., & Wu, Z. L. (2022) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2022.109895 · Cited by 183
Tamo, A. K. (2024) · Journal of Materials Chemistry B · doi:10.1039/d4tb00397g · Cited by 171
Bioprinting functional tissues
Leberfinger, A. N., Dinda, S., Wu, Y., Koduru, S. V., Ozbolat, V., Ravnic, D. J., & Ozbolat, I. T. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.009 · Cited by 180
Application of Extrusion-Based Hydrogel Bioprinting for Cartilage Tissue Engineering
You, F., Eames, B. F., & Chen, X. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18071597 · Cited by 178
Nature-Based Biomaterials and Their Application in Biomedicine
Troy, E., Tilbury, M. A., Power, A. M., & Wall, J. G. (2021) · Polymers · doi:10.3390/polym13193321 · Cited by 170
3D Bioprinting Using a Templated Porous Bioink
Armstrong, J. P. K., Burke, M., Carter, B. M., Davis, S. A., & Perriman, A. W. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600022 · Cited by 182
Ding, A., Tang, F., & Alsberg, E. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00070 · Cited by 165
Kim, M. H., Lee, Y. W., Jung, W.-K., Oh, J., & Nam, S. Y. (2019) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2019.06.014 · Cited by 175
Common biocompatible polymeric materials for tissue engineering and regenerative medicine
Asadi, N., Del Bakhshayesh, A. R., Davaran, S., & Akbarzadeh, A. (2020) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.122528 · Cited by 171
Eze, F. N., Jayeoye, T. J., & Singh, S. (2022) · Food Chemistry · doi:10.1016/j.foodchem.2021.130574 · Cited by 176
Potential Applications of Nanocellulose-Containing Materials in the Biomedical Field
Halib, N., Perrone, F., Cemazar, M., Dapas, B., Farra, R., Abrami, M., Chiarappa, G., Forte, G., Zanconati, F., Pozzato, G., et al. (2017) · Materials · doi:10.3390/ma10080977 · Cited by 176
“A bioink based on NFC and alginate (A) has been used to perform the bioprinting technology [94].”
MethodFunctionalizing bioinks for 3D bioprinting applications
Parak, A., Pradeep, P., du Toit, L. C., Kumar, P., Choonara, Y. E., & Pillay, V. (2019) · Drug Discovery Today · doi:10.1016/j.drudis.2018.09.012 · Cited by 166
Processing nanocellulose to bulk materials: a review
Wang, Q., Yao, Q., Liu, J., Sun, J., Zhu, Q., & Chen, H. (2019) · Cellulose · doi:10.1007/s10570-019-02642-3 · Cited by 171
“…et al. 2016; Gatenholm et al. 2014, 2016a, b; Håkansson et al. 2016; Hausmann et al. 2018; Henriksson et al. 2017; Kokkinis et al. 2015; Kuzmenko et al. 2018; Markstedt et al. 2014, 2015, 2017, 2019; Muller et al. 2017; Nguyen et al. 2017; Siqueira et al. 2017; Studart 2016; Sundberg et al. 2014).”
Metadata
- Authors
- Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P.
- Affiliations
- Wallenberg Wood Science Center (SE)
- Wallenberg Wood Science Center and ‡Biopolymer Technology, Department of Chemical and Biological Engineering, Chalmers University of Technology, Gothenburg 412 96, Sweden
- Corresponding author
- Gatenholm, Paul
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-04-07
- Volume
- 16
- Issue
- 5
- Pages
- 1489-1496
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1994903148
- Cited by
- 1,528
- References
- 39
- Citations by year
- 2026: 64 · 2025: 90 · 2024: 116 · 2023: 151 · 2022: 198 · 2021: 204 · 2020: 198 · 2019: 177 · 2018: 147 · 2017: 99 · 2016: 73 · 2015: 9
- FWCI
- 54.39
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Chalmers Research (Chalmers University of Technology) (submittedVersion)
- Funders
- European Commission
- VINNOVA
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- 3D bioprinting, human chondrocytes, cartilage tissue engineering, nanocellulose, alginate, bioinks, cellulose nanofibers, shear thinning, hydrogels, meniscus, auricular cartilage, cell viability, shape fidelity
- MeSH terms
- Alginates, Animals, Cartilage, Cellulose, Hexuronic Acids, Humans, Chondrocytes, Hydrogel, Polyethylene Glycol Dimethacrylate, Glucuronic Acid, Tissue Engineering, Regenerative Medicine, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.