3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications
The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Abstract
The introduction of 3D bioprinting is expected to revolutionize the field of tissue engineering and regenerative medicine. The 3D bioprinter is able to dispense materials while moving in X, Y, and Z directions, which enables the engineering of complex structures from the bottom up. In this study, a bioink that combines the outstanding shear thinning properties of nanofibrillated cellulose (NFC) with the fast cross-linking ability of alginate was formulated for the 3D bioprinting of living soft tissue with cells. Printability was evaluated with concern to printer parameters and shape fidelity. The shear thinning behavior of the tested bioinks enabled printing of both 2D gridlike structures as well as 3D constructs. Furthermore, anatomically shaped cartilage structures, such as a human ear and sheep meniscus, were 3D printed using MRI and CT images as blueprints. Human chondrocytes bioprinted in the noncytotoxic, nanocellulose-based bioink exhibited a cell viability of 73% and 86% after 1 and 7 days of 3D culture, respectively. On the basis of these results, we can conclude that the nanocellulose-based bioink is a suitable hydrogel for 3D bioprinting with living cells. This study demonstrates the potential use of nanocellulose for 3D bioprinting of living tissues and organs.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [28]
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Alginate Hydrogels as Biomaterials
Augst, A. D., Kong, H. J., & Mooney, D. J. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600069 · Cited by 1,839
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Bacterial cellulose as a potential scaffold for tissue engineering of cartilage
Svensson, A., Nicklasson, E., Harrah, T., Panilaitis, B., Kaplan, D. L., Brittberg, M., & Gatenholm, P. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.049 · Cited by 1,026
Self-citationSurface engineering approaches to micropattern surfaces for cell-based assays
Falconnet, D., Csucs, G., Michelle Grandin, H., & Textor, M. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.024 · Cited by 944
Wågberg, L., Decher, G., Norgren, M., Lindström, T., Ankerfors, M., & Axnäs, K. (2008) · Langmuir · doi:10.1021/la702481v · Cited by 867
Research works printed but not linked: 1
- Wågberg L., 1987, Colloids Surf., 27, 163, 10.1016/0166-6622(87)80335-9 · doi:10.1016/0166-6622(87)80335-9 · Paper page
Cited by
Items 901–1,000 of 1,001
Jack, A. A., Nordli, H. R., Powell, L. C., FARNELL, D. J. J., Pukstad, B. S., Rye, P. D., Thomas, D. W., Chinga‐Carrasco, G., & Hill, K. E. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00522 · Cited by 22
Paczkowska‐Walendowska, M., Kulawik, M., Kwiatek, J., Bikiaris, D. Ν., & Cielecka‐Piontek, J. (2025) · Materials · doi:10.3390/ma18092124 · Cited by 24
3D bioprinting of hydrogel/ceramic composites with hierarchical porosity
Mainardi, J. C., Demarchi, C. B., Mirdrikvand, M., Karim, M. N., Dreher, W., Rezwan, K., & Maas, M. (2022) · Journal of Materials Science · doi:10.1007/s10853-021-06829-7 · Cited by 22
Intersection of nanomaterials and organoids technology in biomedicine
Shen, C., Zhang, Z., Li, X., Huang, Y.-P., Wang, Y., Zhou, H. R., Xiong, L., Wen, Y., Zou, H., & Liu, Z. (2023) · Frontiers in Immunology · doi:10.3389/fimmu.2023.1172262 · Cited by 21
“In addition, bioinks combining the excellent shear-thinning properties of nanofiber cellulose (NFC) and the rapid crosslinking ability of sodium alginate were used for 3D bioprinting of human cartilage tissue and cells in the study by Markstedt et al (61).”
MethodEze, F. N., Muangrat, R., Singh, S. K., Jirarattanarangsri, W., Siriwoharn, T., & Chalermchat, Y. (2024) · Foods · doi:10.3390/foods13142281 · Cited by 21
Design considerations and challenges for mechanical stretch bioreactors in tissue engineering
Lei, Y. F., & Ferdous, Z. (2016) · Biotechnology Progress · doi:10.1002/btpr.2256 · Cited by 21
Yun, B. G., Lee, S., Jeon, J. H., Kim, S.-W., Jung, C. K., Park, G., Kim, S. Y., Jeon, S., Lee, M. S., Park, S. H., et al. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01356 · Cited by 21
Bioprinting: A promising approach for tissue regeneration
França, F. S., dos Santos, M. G., Prestes, J. P., Alcantara, B. J., Borges, M. F., & Pranke, P. H. L. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00130 · Cited by 21
de Souza, T. V., Malmonge, S. M., & Santos, A. R. (2021) · Journal of Biomaterials Applications · doi:10.1177/08853282211024164 · Cited by 21
“In addition, their high water con- tent allows them to acquire a structure similar to that of the ECM.41,42 The most common hydrogels used in 3D bioprinting contain collagen, HA, CHI, and alginate.”
BackgroundThree-Dimensional Cell Culture Models of Hepatocellular Carcinoma — a Review
Ayvaz, I., Sunay, D., Sarıyar, E., Erdal, E., & Karagonlar, Z. F. (2021) · Journal of Gastrointestinal Cancer · doi:10.1007/s12029-021-00772-1 · Cited by 22
Nagahara, M. H. T., Decarli, M. C., Neto, P. I., da Silva, J. V. L., & Moraes, Â. M. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.52612 · Cited by 24
3D bioprinting of articular cartilage: Recent advances and perspectives
Dufaud, M., Sole, L., Maumus, M., Simon, M., Perrier‐Groult, E., Subra, G., Jørgensen, C., & Noël, D. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00253 · Cited by 23
Review: The potential of nanocellulose composites for sustainable food packaging applications
Nasra, A. E. S., Hasanien, Y. A., & Mogy, S. A. E. (2024) · Polymer Composites · doi:10.1002/pc.29321 · Cited by 23
“95 Several studies have been conducted on creating cellulose nanocomposite utilizing 3DP technology.”
4D Printing of Thermoresponsive OEGMA‐Based Hydrogels with Tunable Response
Tran, H. B. D., Spiegel, C. A., & Blasco, E. (2025) · Macromolecular Materials and Engineering · doi:10.1002/mame.202500096 · Cited by 21
Wang, Y., Yuan, W., Zhang, L., Zhang, Z., Zhang, G., Wang, S., He, L., & Tao, G. (2020) · Advanced Sustainable Systems · doi:10.1002/adsu.202000046 · Cited by 20
Stolz, B., Mader, M., Volk, L., Steinberg, T., & Mülhaupt, R. (2020) · Macromolecular Materials and Engineering · doi:10.1002/mame.202000541 · Cited by 21
Latif, M., Jiang, Y., Kumar, B., Cho, H. C., Song, J. M., & Kim, J. (2022) · ACS Applied Nano Materials · doi:10.1021/acsanm.2c00151 · Cited by 20
Molecular and Colloidal Transport in Bacterial Cellulose Hydrogels
Babayekhorasani, F., Hosseini, M., & Spicer, P. T. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c00178 · Cited by 21
Zhang, Y., Li, W., Pan, P., Tang, J., Dong, B., Xing, F., & Zhu, G. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110056 · Cited by 21
Lan, X., Adesida, A. B., & Boluk, Y. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac9b06 · Cited by 25
“Live/dead assay is the predominant choice for assessing cell viability in the bioprinting of cell-laden hydrogels after gelation [75, 118, 119].”
3D Bioprinting of Hyaline Cartilage Using Nasal Chondrocytes
Lan, X., Boluk, Y., & Adesida, A. B. (2023) · Annals of Biomedical Engineering · doi:10.1007/s10439-023-03176-3 · Cited by 22
Alginate-waterborne polyurethane 3D bioprinted scaffolds for articular cartilage tissue engineering
Olmos‐Juste, R., Larrañaga-Jaurrieta, G., Larraza, I., Ramos-Díez, S., Camarero‐Espinosa, S., Gabilondo, N., & Eceiza, A. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.127070 · Cited by 22
Nanocellulose Composite Biomaterials in Industry and Medicine
Shoseyov, O., Kam, D., Shalom, T. B., Shtein, Z., Vinkler, S., & Posen, Y. (2019) · Biologically-inspired systems · doi:10.1007/978-3-030-12919-4_17 · Cited by 25
Kangas, H., Felissia, F. E., Filgueira, D., Ehman, N. V., Vallejos, M. E., Vedoya, C. M. I., Lahtinen, P., Área, M. C., & Chinga‐Carrasco, G. (2019) · Bioengineering · doi:10.3390/bioengineering6030060 · Cited by 20
Cernencu, A. I., Lungu, A., Drăguşin, D. M., Stancu, I., Dinescu, S., Balahura, L.-R., Mereuță, P. E., Costache, M., & Iovu, H. (2021) · Materials · doi:10.3390/ma14174891 · Cited by 20
“CNFs comes in aid as a structural builder since it has already been shown to improve the rheological behavior of inks through hydrogen bonding and hydrophobic interactions [30]. behavior of inks through hydrogen bonding and hydrophobic interactions [30].”
Synthetic chemistry of cellulose hydrogels-A review
Thakur, A., & Kaur, H. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.09.201 · Cited by 21
Han, Y., Lian, M., Zhang, C., Jia, B., Wu, Q., Sun, B., Qiao, Z., Sun, B., & Dai, K. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101547 · Cited by 24
hadad, A. A. E., Alcudia, A., Begines, B., Perez-Soriano, E. M., & Torres, Y. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101603 · Cited by 24
A bioprinting printing approach to regenerate cartilage for microtia treatment
Chung, J. H.-Y., Kade, J. C., Jeiranikhameneh, A., Yue, Z., Mukherjee, P., & Wallace, G. G. (2018) · Bioprinting · doi:10.1016/j.bprint.2018.e00031 · Cited by 20
Fabrication of Biopolymer-Based Organs and Tissues Using 3D Bioprinting
Goel, A., Meher, M. K., Gulati, K., & Poluri, K. M. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815890-6.00003-7 · Cited by 25
Transparent cellulose nanofiber based open cell culture platform using matrix-assisted 3D printing
Shin, S., Kwak, H., & Hyun, J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115235 · Cited by 20
Sharma, R., Kumar, S. L., Malviya, R., Sundram, S., Uniyal, P., & Prajapati, B. G. (2024) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2024.106064 · Cited by 20
iPSC-neural crest derived cells embedded in 3D printable bio-ink promote cranial bone defect repair
Glaeser, J. D., Bao, X., Kaneda, G., Avalos, P., Behrens, P. H., Salehi, K., Da, X., Chen, A., Castaneda, C. M., Nakielski, P., et al. (2022) · Scientific Reports · doi:10.1038/s41598-022-22502-8 · Cited by 21
Sithole, M. N., Kumar, P., du Toit, L. C., Erlwanger, K. H., Ubanako, P. N., & Choonara, Y. E. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24087611 · Cited by 20
Majumder, N., & Ghosh, S. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202300651 · Cited by 19
Bio-based Polymers: a Review on Processing and 3D Printing
Begum, S. A., Krishnan, P. S. G., & Kanny, K. M. (2023) · Polymer Science Series A · doi:10.1134/s0965545x2360045x · Cited by 19
Hernández-Sosa, A., Mercado-Rico, J., Usala, E., Cataldi, G., Esteban-Arranz, A., Penott-Chang, E. K., Müller, A. J., González, Z., Espinosa, E., & Hernández, R. (2024) · Polymer · doi:10.1016/j.polymer.2024.126845 · Cited by 19
“The combination of CNFs with alginate, a polysaccharide extracted from brown seaweed, to form composite hydrogels has been considered a relevant topic over the last years [4 – 6].”
Dermol, Š., Borin, B., Gregor‐Svetec, D., Perše, L. S., & Lavrič, G. (2024) · Polymers · doi:10.3390/polym16111527 · Cited by 19
“Markstedt et al. [35] produced hydrogels with different proportions of the two components and 3D-printed them using FDM technology.”
MethodBioprinting: Uncovering the Utility Layer-By-Layer
Burke, M., Carter, B. M., & Perriman, A. W. (2017) · Journal of 3D Printing in Medicine · doi:10.2217/3dp-2017-0006 · Cited by 20
The Biomaker: an entry‐level bioprinting device for biotechnological applications
Radtke, C. P., Hillebrandt, N., & Hubbuch, J. J. (2017) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.5429 · Cited by 20
Bao, X., Li, Z., Liu, H., Feng, K., Yin, F., Li, H., & Qin, J. (2017) · Molecular Medicine Reports · doi:10.3892/mmr.2017.8153 · Cited by 23
“MSCs and chondrocytes are commonly used in cartilage and bone tissue engineering (9,21-23).”
The Method of Artificial Organs Fabrication Based on Reverse Engineering in Medicine
Macko, M., Szczepański, Z., Mikołajewski, D., Mikołajewska, E., & Listopadzki, S. (2017) · Lecture notes in mechanical engineering · doi:10.1007/978-3-319-50938-9_36 · Cited by 19
Nanocellulose Extracted from Defoliation of Ginkgo Leaves
Ma, H., & Hsiao, B. S. (2018) · MRS Advances · doi:10.1557/adv.2018.148 · Cited by 19
Biocompatible composites based on alginate, polycaprolactone, and nanocellulose - A review
Ikhtiarini, N., Kamil, M. Z., Bukit, B. F., Juliadmi, D., Prasetiyo, K. W., Fransiska, D., Sedayu, B. B., Subiyanto, B., Sulastiningsih, I. M., Rochima, E., et al. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.143423 · Cited by 18
Modified Polysaccharides: Potential Biomaterials for Bioprinting
Jiang, T., Yang, Y. K., Lin, Z., Yang, H., & Luo, Z. (2025) · Journal of Functional Biomaterials · doi:10.3390/jfb16090338 · Cited by 18
“Markstedt et al. [164] successfully fabricated cell-laden human ears and menisci using bioprinting.”
Moore, C. A., Siddiqui, Z., Carney, G. J., Naaldijk, Y., Guiro, K., Ferrer, A. I., Sherman, L. S., Güvendiren, M., Kumar, V., & Rameshwar, P. (2021) · Polymers · doi:10.3390/polym13040480 · Cited by 19
Organic functional substance engineered living materials for biomedical applications
Wang, T., Wu, M., Cao, L., & Liu, B. (2023) · Biomaterials · doi:10.1016/j.biomaterials.2023.122248 · Cited by 18
Huang, J., Huang, Z., Xiong, J., Xia, J., Wang, Y., Yang, L., & Liang, Y. (2023) · Designed Monomers & Polymers · doi:10.1080/15685551.2023.2284482 · Cited by 18
Improving the Three-Dimensional Printability of Potato Starch Loaded onto Food Ink
Oh, Y., Lee, S., Lee, N. K., & Rhee, J. (2024) · Journal of Microbiology and Biotechnology · doi:10.4014/jmb.2311.11040 · Cited by 19
Khiari, Z. (2024) · Marine Drugs · doi:10.3390/md22030134 · Cited by 21
“Cartilage [158] Carrageenan Natural, non-toxic, biocompatible, and biodegradable Brittle and instable Cartilage tissue engineering [168,169] Chitosan shares similar properties as alginate [natural-origin, non-toxicity, biocompatibility, and biodegradability].”
Lai, G., & Meagher, L. (2024) · Biofabrication · doi:10.1088/1758-5090/ad39a8 · Cited by 21
“This is mainly due to the rheological behavior of the bioinks used and the interaction of the bioink with the substrate surface interaction can affect the outcome of the printed structure when no spatial constraint on the deposited bioink strands are present [47].”
BackgroundHasan, M. M., Swapon, A. R., Dipti, T. I., Choi, Y., & Yi, H. (2024) · Journal of Microbiology and Biotechnology · doi:10.4014/jmb.2401.01024 · Cited by 19
“This approach involved blending SPI with hydroxyethyl cellulose (HEC), a water-soluble cellulose variant, to improve in vivo biodegradability of the composite scaffolds [59].”
MethodCosta, R. M., Rauf, S., & Hauser, C. A. E. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.05.001 · Cited by 23
3D bioprinting of alginate scaffolds with controlled micropores by leaching of recrystallized salts
Wei, X., Luo, Y., & Huang, P. (2019) · Polymer Bulletin · doi:10.1007/s00289-019-02690-6 · Cited by 18
Liu, C., Li, M., Mei, C., Xu, W., & Wu, Q. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c02904 · Cited by 18
Frejo, L., Goldstein, T. A., Swami, P. N., Patel, N. A., Grande, D. A., Zeltsman, D., & Smith, L. P. (2022) · International Journal of Pediatric Otorhinolaryngology · doi:10.1016/j.ijporl.2022.111066 · Cited by 19
Ventura, C., Marques, C. F., Cadete, J., Vilar, M., Pedrosa, J. F. S., Pinto, F., Fernandes, S. N., da Rosa, R. R., Godinho, M. H., Ferreira, P. J., et al. (2022) · Journal of Xenobiotics · doi:10.3390/jox12020009 · Cited by 19
Ratri, M. C., Brilian, A. I., Setiawati, A., Nguyen, H. T., Soum, V., & Shin, K. (2021) · Advanced NanoBiomed Research · doi:10.1002/anbr.202000088 · Cited by 20
Larraza, I., Vadillo, J., Calvo‐Correas, T., Tejado, Á., Martin, L., Arbelaiz, A., & Eceiza, A. (2022) · Polymers · doi:10.3390/polym14214516 · Cited by 18
Tissue Engineering Using Plant-Derived Cellulose Nanofibrils (CNF) as Scaffold Material
Syverud, K. (2017) · ACS symposium series · doi:10.1021/bk-2017-1251.ch009 · Cited by 23
Assessing printability of bioinks
Kyle, S., Jessop, Z. M., Tarassoli, S. P., Al‐Sabah, A., & Whitaker, I. S. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-101103-4.00027-2 · Cited by 21
Li, J., Haoran, S., & Wang, M. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c02507 · Cited by 18
Natural‐Based Hydrogels: From Processing to Applications
Vieira, S., Morais, A. D. S., Silva‐Correia, J., Oliveira, J. M., & Reis, R. L. (2017) · Wiley eBooks · doi:10.1002/0471440264.pst652 · Cited by 19
Bouzidi, K., Chaussy, D., Gandini, A., Bongiovanni, R. M., & Beneventi, D. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119716 · Cited by 17
Nguyen, T. T., Toyoda, Y., Bahri, N. S. N. S., Rahmatika, A. M., Cao, K. L. A., Hirano, T., Takahashi, K., Goi, Y., Morita, Y., Watanabe, M., et al. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.10.078 · Cited by 17
Tissue engineering in growth plate cartilage regeneration: Mechanisms to therapeutic strategies
Guo, R.-Y., Zhuang, H.-J., Chen, X.-N., Ben, Y., Fan, M., Wang, Y.-W., & Zheng, P.-F. (2023) · Journal of Tissue Engineering · doi:10.1177/20417314231187956 · Cited by 16
Abadpour, S., Niemi, E. M., Orrhult, L. S., Hermanns, C., de Vries, R. H. W., Nogueira, L. P., Haugen, H. J., Josefsen, D., Krauss, S. J. K., Gatenholm, P., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300640 · Cited by 17
Self-citationElectrostatically Cross-Linked Bioinks for Jetting-Based Bioprinting of 3D Cell Cultures
Suwannakot, P., Zhu, L., Tolentino, M. A. K., Du, E. Y., Sexton, A., Myers, S., & Gooding, J. J. (2023) · ACS Applied Bio Materials · doi:10.1021/acsabm.3c00849 · Cited by 17
Tóth, G. S., Backman, O., Siivola, T., Xu, W., Kosourov, S. N., Siitonen, V., Xu, C., & Allahverdiyeva, Y. (2024) · Green Chemistry · doi:10.1039/d3gc04264b · Cited by 19
Bioinks for bioprinting using plant-derived biomaterials
Hasan, M. M., Ahmad, A., Akter, M. Z., Choi, Y., & Yi, H. (2024) · Biofabrication · doi:10.1088/1758-5090/ad6932 · Cited by 20
“Subsequently, it is alkalinized and pre-cipitated with sodium or calcium carbonate to generate an alginate salt [49].”
InfluentialThe Likely Role of Proteolytic Enzymes in Unwanted Differentiation of Stem Cells in Culture
Penna, V., Lipay, M. V. N., Duailibi, M. T., & Duailibi, S. E. (2015) · Future Science OA · doi:10.4155/fso.15.26 · Cited by 17
Silva, L. P. (2018) · Wiley eBooks · doi:10.1002/9783527813704.ch15 · Cited by 26
Nanocellulose: Preparation, Functionalization and Applications
Sunasee, R. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-409547-2.14946-7 · Cited by 18
Sekar, J. A., Athira, R. K., LAKSHMI, T. S., Velayudhan, S., Bhatt, A., Kumar, P. R. A., & Kasoju, N. (2021) · Springer eBooks · doi:10.1007/978-981-16-0002-9_17 · Cited by 23
Application of bone and cartilage extracellular matrices in articular cartilage regeneration
Haghwerdi, F., Ravari, M. K., Taghiyar, L., Shamekhi, M. A., Jahangir, S., Haririan, I., & Eslaminejad, M. B. (2021) · Biomedical Materials · doi:10.1088/1748-605x/ac094b · Cited by 20
“Various natural-based hydrogels like chitosan [28], alginate [29, 30], platelet lysate (PL) [31], fibrin [32, 33], collagen [34], and synthesized materials like poly(ethylene glycol) [35], poly( D , L -lactic-co-glycolic acid) (PLGA) [36], and poly ( ε -caprolactone) (PCL) [37, 38] have been used…”
Zineh, B. R., Roshangar, L., Meshgi, S., & Shabgard, M. (2022) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-022-02654-5 · Cited by 17
“The nontoxic structure of AL after degradation and high amounts of water in its structure have caused high biological efficiency, especially in cartilage scaffolds seeded with chondrocyte cells [15, 16].”
BackgroundNanofibrillated Cellulose and Copoly(amino acid) Hydrogel Matrices in Biotechnology and Biomedicine
Khan, A. U., Malik, N., & Arfin, T. (2017) · Wiley eBooks · doi:10.1002/9783527803835.ch12 · Cited by 22
Ear Reconstruction and 3D Printing: Is It Reality?
Lin, A. J., Bernstein, J., & Spector, J. (2018) · Current Surgery Reports · doi:10.1007/s40137-018-0198-5 · Cited by 12
Stolz, B., & Mülhaupt, R. (2020) · Macromolecular Materials and Engineering · doi:10.1002/mame.201900740 · Cited by 19
Zhu, J., Ma, H., Du, J., Fang, H., Cheng, Y. Y., Xu, J., Pan, B., & Song, K. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.139056 · Cited by 18
Asohan, A. W., Hashim, R., Ishak, K. M. K., Hamid, Z. A. A., Jasme, N., & Bustami, Y. (2022) · Applied Sciences · doi:10.3390/app12020771 · Cited by 16
Golzar, H., Wu, Y., Ganguly, S., & Tang, X. S. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103691 · Cited by 16
3-Dimentional printing of polysaccharides for water-treatment: A review
Zhang, H., Xue, Y., Jiang, C., Liu, D., Zhang, L., Lang, G., Mao, T., Effrem, D. B., Iimaa, T., Surenjav, U., et al. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131117 · Cited by 16
Engineering tools for stimulating wound healing
Lazarus, E., Barnum, L., Ramesh, S., Quint, J. P., Samandari, M., Laflamme, S., Secord, T. W., Schmidt, T. A., Tamayol, A., & Rivero, I. V. (2024) · Applied Physics Reviews · doi:10.1063/5.0173663 · Cited by 17
Bioinks and Their Applications in Tissue Engineering
Nulty, J. M., Schipani, R., Burdis, R., & Kelly, D. J. (2019) · Springer eBooks · doi:10.1007/978-3-030-24532-0_9 · Cited by 17
Lim, M. H., Jeun, J. H., Kim, D. H., Park, S. H., Kim, S.-J., Lee, W. S., Hwang, S. H., Lim, J. Y., & Kim, S. W. (2020) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-020-00261-9 · Cited by 16
Golchin, A., Farzaneh, S., Porjabbar, B., Sadegian, F., Estaji, M., Ranjbarvan, P., Kanafimahbob, M., Ranjbari, J., Salehi‐Nik, N., & Hosseinzadeh, S. (2020) · Current Stem Cell Research & Therapy · doi:10.2174/1574888x15666200720115519 · Cited by 17
Engineered proteins and three-dimensional printing of living materials
Gona, R. S., & Meyer, A. S. (2020) · MRS Bulletin · doi:10.1557/mrs.2020.298 · Cited by 16
Coldebella, R., Gentil, M., Berger, C., Costa, H. W. D., Pedrazzi, C., Labidi, J., Delucis, R. D. Á., & Missio, A. L. (2021) · Polymers · doi:10.3390/polym13060908 · Cited by 16
3D Bioprinting for Tissue Engineering
Noh, S., Myung, N., Park, M., Kim, S., Zhang, S.-U., & Kang, H. (2017) · Springer eBooks · doi:10.1007/978-981-10-2723-9_5 · Cited by 16
Techniques and Software Used in 3D Printing for Nanomedicine Applications
Sahai, N., & Gogoi, M. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815890-6.00002-5 · Cited by 20
Materials as Bioinks and Bioink Design
Camacho, P., Busari, H., Seims, K. B., Tolbert, J. W., & Chow, L. W. (2019) · Springer eBooks · doi:10.1007/978-3-030-23906-0_2 · Cited by 23
Three-dimensional bioprinting of auricular cartilage: A review
Jiang, R., Guo, W., Zhang, J., Zhang, X., Zhou, L., & Xu, T. (2019) · Medicine in Drug Discovery · doi:10.1016/j.medidd.2020.100016 · Cited by 16
Fiber-Filled Hybrid Hydrogel for Bio-Manufacturing
Habib, A., & Khoda, B. (2020) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4049479 · Cited by 16
Internally crosslinked alginate-based bioinks for the fabrication of in vitro hepatic tissue models
Guagliano, G., Volpini, C., Camilletti, J., Donnaloja, F., Vangosa, F. B., Visai, L., & Petrini, P. (2023) · Biofabrication · doi:10.1088/1758-5090/acd872 · Cited by 15
“nanocellulose), thus overcoming this limitations [36].”
BackgroundMulti-scale assembly and structure-process-property relationships in nanocellulosic materials
Jamal, M., Benkaddour, A., Pal, L., Sehaqui, H., Lucia, L. A., Eichhorn, S. J., & Habibi, Y. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101430 · Cited by 18
All-Cellulose Hydrogel-Based Bioinks for the Versatile 3D Bioprinting of Different Cell Lines
Carvalho, J. P. F., Lameirinhas, N. S., Teixeira, M. C., Luís, J. L., Oliveira, H., Oliveira, J. M., Silvestre, A. J. D., Vilela, C., & Freire, C. S. R. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.4c01546 · Cited by 16
Three-dimensional bioprinting for organ bioengineering: promise and pitfalls
Ali, M., Anil Kumar, P. R., Lee, S. J., & Jackson, J. D. (2018) · Current Opinion in Organ Transplantation · doi:10.1097/mot.0000000000000581 · Cited by 15
Three-Dimensional Bioprinting in Orthopaedics
Larsen, C. G., Stapleton, E., Sgaglione, J., Sgaglione, M. W., Goldstein, T. A., Sgaglione, N. A., & Grande, D. A. (2020) · JBJS Reviews · doi:10.2106/jbjs.rvw.19.00204 · Cited by 15
Wood Plastic Composites (WPCs): Applications of Nanomaterials
Zor, M., Mengeloğlu, F., Aydemir, D., Şen, F., Kocatürk, E., Candan, Z., & Ozcelik, O. (2022) · Springer eBooks · doi:10.1007/978-3-031-17378-3_4 · Cited by 20
Metadata
- Authors
- Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P.
- Affiliations
- Wallenberg Wood Science Center (SE)
- Wallenberg Wood Science Center and ‡Biopolymer Technology, Department of Chemical and Biological Engineering, Chalmers University of Technology, Gothenburg 412 96, Sweden
- Corresponding author
- Gatenholm, Paul
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-04-07
- Volume
- 16
- Issue
- 5
- Pages
- 1489-1496
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1994903148
- Cited by
- 1,528
- References
- 39
- Citations by year
- 2026: 64 · 2025: 90 · 2024: 116 · 2023: 151 · 2022: 198 · 2021: 204 · 2020: 198 · 2019: 177 · 2018: 147 · 2017: 99 · 2016: 73 · 2015: 9
- FWCI
- 54.39
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Chalmers Research (Chalmers University of Technology) (submittedVersion)
- Funders
- European Commission
- VINNOVA
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- 3D bioprinting, human chondrocytes, cartilage tissue engineering, nanocellulose, alginate, bioinks, cellulose nanofibers, shear thinning, hydrogels, meniscus, auricular cartilage, cell viability, shape fidelity
- MeSH terms
- Alginates, Animals, Cartilage, Cellulose, Hexuronic Acids, Humans, Chondrocytes, Hydrogel, Polyethylene Glycol Dimethacrylate, Glucuronic Acid, Tissue Engineering, Regenerative Medicine, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.