3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications
The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Abstract
The introduction of 3D bioprinting is expected to revolutionize the field of tissue engineering and regenerative medicine. The 3D bioprinter is able to dispense materials while moving in X, Y, and Z directions, which enables the engineering of complex structures from the bottom up. In this study, a bioink that combines the outstanding shear thinning properties of nanofibrillated cellulose (NFC) with the fast cross-linking ability of alginate was formulated for the 3D bioprinting of living soft tissue with cells. Printability was evaluated with concern to printer parameters and shape fidelity. The shear thinning behavior of the tested bioinks enabled printing of both 2D gridlike structures as well as 3D constructs. Furthermore, anatomically shaped cartilage structures, such as a human ear and sheep meniscus, were 3D printed using MRI and CT images as blueprints. Human chondrocytes bioprinted in the noncytotoxic, nanocellulose-based bioink exhibited a cell viability of 73% and 86% after 1 and 7 days of 3D culture, respectively. On the basis of these results, we can conclude that the nanocellulose-based bioink is a suitable hydrogel for 3D bioprinting with living cells. This study demonstrates the potential use of nanocellulose for 3D bioprinting of living tissues and organs.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [28]
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Alginate Hydrogels as Biomaterials
Augst, A. D., Kong, H. J., & Mooney, D. J. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600069 · Cited by 1,839
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Bacterial cellulose as a potential scaffold for tissue engineering of cartilage
Svensson, A., Nicklasson, E., Harrah, T., Panilaitis, B., Kaplan, D. L., Brittberg, M., & Gatenholm, P. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.049 · Cited by 1,026
Self-citationSurface engineering approaches to micropattern surfaces for cell-based assays
Falconnet, D., Csucs, G., Michelle Grandin, H., & Textor, M. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.024 · Cited by 944
Wågberg, L., Decher, G., Norgren, M., Lindström, T., Ankerfors, M., & Axnäs, K. (2008) · Langmuir · doi:10.1021/la702481v · Cited by 867
Research works printed but not linked: 1
- Wågberg L., 1987, Colloids Surf., 27, 163, 10.1016/0166-6622(87)80335-9 · doi:10.1016/0166-6622(87)80335-9 · Paper page
Cited by
Items 501–600 of 1,001
Three-Dimensional Printing Articular Cartilage: Recapitulating the Complexity of Native Tissue
Guo, T., Lembong, J., Zhang, L. G., & Fisher, J. P. (2016) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2016.0316 · Cited by 66
“92 The scaffolds were printed with low pressure and crosslinked using CaCl 2 at room temperature.”
Spinifex nanocellulose derived hard carbon anodes for high-performance sodium-ion batteries
Gaddam, R. R., Jiang, E., Amiralian, N., Annamalai, P. K., Martin, D. J., Nanjundan, A. K., & Zhao, X. (2017) · Sustainable Energy & Fuels · doi:10.1039/c7se00169j · Cited by 65
Tang, A., Li, J., Li, J., Zhao, S., Liu, W., Liu, T., Wang, J., & Liu, Y. (2019) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2019.1602904 · Cited by 65
“A bioink composed of nanofibrillated cellulose (NFC) and alginate was reported for 3D bioprinting of living tissue [7].”
BackgroundDiogo, G. S., Marques, C. F., Sotelo, C. G., Pérez‐Martín, R. I., Pirraco, R. P., Reis, R. L., & Silva, T. H. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c00436 · Cited by 68
3D Printing of Hemicellulosic Biopolymers Extracted from Lignocellulosic Agricultural Wastes
Bahçegül, E. G., Bahçegül, E., & Özkan, N. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c00256 · Cited by 65
Stem Cells and Extrusion 3D Printing for Hyaline Cartilage Engineering
Messaoudi, O., Henrionnet, C., Bourge, K., Lœuille, D., Gillet, P., & Pinzano, A. (2020) · Cells · doi:10.3390/cells10010002 · Cited by 65
Kang, M. S., Kwon, M., Lee, S. H., Kim, W., Lee, G. W., Jo, H. J., Kim, B., Yang, S. Y., Kim, K. S., & Han, D. (2022) · Chemistry - An Asian Journal · doi:10.1002/asia.202200620 · Cited by 67
Pozo-Pérez, L., Tornero-Esteban, P., & López‐Bran, E. (2024) · Stem Cell Research & Therapy · doi:10.1186/s13287-024-03801-5 · Cited by 64
“Currently, 3D printing techniques have been used for the regeneration of different types of tissues, including skin [208], cartilage [209], vascular networks [210] or organs such a bioprosthetic ovary [211].”
MethodSingh, A. V., Ansari, M. H. D., Wang, S., Laux, P., Luch, A., Kumar, A., Patil, R., & Nußberger, S. (2019) · Applied Sciences · doi:10.3390/app9040811 · Cited by 66
Ahlfeld, T., Schuster, F., Förster, Y., Quade, M., Akkineni, A. R., Rentsch, C., Rammelt, S., Gelinsky, M., & Lode, A. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801512 · Cited by 65
He, Y., Derakhshanfar, S., Zhong, W., Li, B., Lu, F., Xing, M. M. Q., & Li, X. (2020) · Journal of Nanomaterials · doi:10.1155/2020/2057097 · Cited by 66
“Nevertheless, the intrinsic property of pristine materials should be considered for the enhancement of biomedical application; for instance, it has been shown that alginate-nanofibrillated cellulose (NFC) can be used as a cell-compatible bioink combining fast gelation properties of alginate and good shear thinning pro…”
BackgroundResult3D printing of a bio-based ink made of cross-linked cellulose nanofibrils with various metal cations
Mietner, J. B., Jiang, X., Edlund, U., Saake, B., & Navarro, J. R. G. (2021) · Scientific Reports · doi:10.1038/s41598-021-85865-4 · Cited by 62
Biomedical nanomaterials: applications, toxicological concerns, and regulatory needs
Karakuş, C. Ö., Bilgi, E., & Winkler, D. A. (2020) · Nanotoxicology · doi:10.1080/17435390.2020.1860265 · Cited by 65
Ferreira, F. V., Souza, A. G., Ajdary, R., de Souza, L. P., Lopes, J. H., Correa, D. S., Siqueira, G. D. F., Barud, H. D. S., Rosa, D. D. S., Mattoso, L. H. C., et al. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.06.020 · Cited by 86
“[112] prepared 3D bioprinted shapes resembling cartilage tissues using a bio-ink consisting of CNF and alginate at room temperature and low pressure (critical features to work with living cells).”
BackgroundMethodInfluentialDevelopments of additive manufacturing and 5D printing in tissue engineering
Lai, J., & Wang, M. (2023) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-023-01193-5 · Cited by 68
Uțoiu, E., Manoiu, V. S., Oprita, E. I., & Crăciunescu, O. (2024) · Gels · doi:10.3390/gels10060387 · Cited by 74
“The ability of bacterial cellulose to retain water molecules within its porous structure enhances nutrient transport, waste removal, and signaling molecule diffusion, essential for supporting cellular activities within the hydrogel matrix [33,36].”
BackgroundA new photoelectric ink based on nanocellulose/CdS quantum dots for screen-printing
Tang, A., Liu, Y., Wang, Q.-W., Chen, R., Liu, W., Fang, Z., & Wang, L. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.04.034 · Cited by 62
Cross-linkable multi-stimuli responsive hydrogel inks for direct-write 3D printing
Karis, D., Ono, R. J., Zhang, M., Vora, A., Storti, D., Ganter, M. A., & Nelson, A. (2017) · Polymer Chemistry · doi:10.1039/c7py00831g · Cited by 68
Romanazzo, S., Vedicherla, S., Moran, C. J., & Kelly, D. J. (2017) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2602 · Cited by 63
“create 3D engineered tissues that can mimic the anatomic shape of the organ of interest (Ahn, Kim, Lee, & Kim, 2012; Hong et al., 2015; Markstedt et al., 2015; Skardal & Atala, 2015; Yang, Tadepalli, & Wiley, 2017).”
BackgroundZhang, J., Allardyce, B. J., Rajkhowa, R., Kalita, S., Dilley, R. J., Wang, X., & Liu, X. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109784 · Cited by 65
Ren, Y., & Feng, J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b17371 · Cited by 62
Biomaterials and 3D printing techniques used in the medical field
Mishra, A., & Srivastava, V. (2021) · Journal of Medical Engineering & Technology · doi:10.1080/03091902.2021.1893845 · Cited by 69
“Standard polymers, including collagen [26], gelatin [27], alginate [28] and hyaluronic acid (HA) [29], and”
BackgroundColloidal multiscale porous adhesive (bio)inks facilitate scaffold integration
Mostafavi, A., Samandari, M., Karvar, M., Ghovvati, M., Endo, Y., Sinha, I., Annabi, N., & Tamayol, A. (2021) · Applied Physics Reviews · doi:10.1063/5.0062823 · Cited by 61
“57,58 Collagen, as the main component of ECM, has a suitable biological efficacy, though its slow cross-linking may limit its application in bioprinting to very simple planar constructs.”
Muthusamy, S., Kannan, S., Lee, M., Vijayavenkataraman, S., Lu, W. F., Fuh, J. Y. H., Sriram, G., & Cao, T. (2021) · Biotechnology and Bioengineering · doi:10.1002/bit.27838 · Cited by 63
Latest Advances in 3D Bioprinting of Cardiac Tissues
Jafari, A., Ajji, Z., Mousavi, A., Naghieh, S., Bencherif, S. A., & Savoji, H. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101636 · Cited by 63
Ullah, M. W., Alabbosh, K. F., Fatima, A., Islam, S. U., Manan, S., Ul‐Islam, M., & Yang, G. (2023) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2023.07.004 · Cited by 74
Lu, Y., Rai, R., & Nitin, N. (2023) · Food Research International · doi:10.1016/j.foodres.2023.113384 · Cited by 64
Clark, C., Aleman, J., Mutkus, L. A., & Skardal, A. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00058 · Cited by 63
Li, M., Tang, Z., Liu, C., Huang, R., Koo, M. S., Zhou, G., & Wu, Q. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c02644 · Cited by 60
Bakhshayesh, A. R. D., Babaie, S., Nasrabadi, H. T., Asadi, N., Akbarzadeh, A., & Abedelahi, A. (2020) · Artificial Cells Nanomedicine and Biotechnology · doi:10.1080/21691401.2020.1809439 · Cited by 65
Progress of 3D Bioprinting in Organ Manufacturing
Song, D., Xu, Y., Liu, S., Wen, L., & Wang, X. (2021) · Polymers · doi:10.3390/polym13183178 · Cited by 62
“Alginate/chitosan hydrogel CaCl2 solution EFD® Nordson printer [88] Nanocellulose-alginate CaCl2 solution 3D discovery printer [89] Zinc oxide (ZnO) nanoparticles (NPs)/alginate CaCl2 solution BioBot 1 [90]”
BackgroundHydrogels for Treatment of Different Degrees of Osteoarthritis
Wang, S., Qiu, Y., Liu, Q., Wang, Q., & Zhou, Q. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.858656 · Cited by 72
“Its fast-crosslinking capability is also used in 3D biometric printing (Markstedt et al., 2015; Müller et al., 2017).”
MethodSofiah, A. G. N., Pasupuleti, J., Samykano, M., Kadirgama, K., Koh, S. P., Kiong, T. S., Pandey, A. K., Yaw, C. T., & Natarajan, S. K. (2023) · Polymers · doi:10.3390/polym15143044 · Cited by 66
Fabrication of Cellulose Nanocrystal Films through Differential Evaporation for Patterned Coatings
Tran, A., Hamad, W. Y., & MacLachlan, M. J. (2018) · ACS Applied Nano Materials · doi:10.1021/acsanm.8b00947 · Cited by 60
Oberlintner, A., Likozar, B., & Novak, U. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117742 · Cited by 61
Fan, X., Yuan, J., Xie, J., Pan, Z., Yao, X., Sun, X., Zhang, P., & Zhang, L. (2018) · Biochemical and Biophysical Research Communications · doi:10.1016/j.bbrc.2018.04.130 · Cited by 59
Kam, D., Chasnitsky, M., Nowogrodski, C., Braslavsky, I., Abitbol, T., Magdassi, S., & Shoseyov, O. (2019) · Colloids and Interfaces · doi:10.3390/colloids3020046 · Cited by 60
Organs-On-Chip Models of the Female Reproductive System
Mancini, V., & Pensabene, V. (2019) · Bioengineering · doi:10.3390/bioengineering6040103 · Cited by 61
Bio-based composite hydrogels for biomedical applications
Buwalda, S. J. (2020) · Multifunctional Materials · doi:10.1088/2399-7532/ab80d6 · Cited by 63
“Gatenholm et al investigated the feasibility of cellulose nanofibrils/alginate composite bioinks loaded with human chondrocytes for cartilage tissue engineering [110, 111].”
BackgroundFlow and hydrodynamic shear stress inside a printing needle during biofabrication
Müller, S., Mirzahossein, E., Iftekhar, E. N., Bächer, C., Schrüfer, S., Schubert, D. W., Fabry, B., & Gekle, S. (2020) · PLoS ONE · doi:10.1371/journal.pone.0236371 · Cited by 60
Bertuola, M., Aráoz, B., Gilabert, U., Wusener, A. E. G., Pérez-Recalde, M., Arregui, C. O., & Hermida, É. B. (2021) · Journal of Materials Science · doi:10.1007/s10853-021-06250-0 · Cited by 60
Advanced Nanocomposite Hydrogels for Cartilage Tissue Engineering
Huang, J., Liu, F., Su, H., Xiong, J., Yang, L., Xia, J., & Liang, Y. (2022) · Gels · doi:10.3390/gels8020138 · Cited by 63
Aqueous Two‐Phase Enabled Low Viscosity 3D (LoV3D) Bioprinting of Living Matter
Becker, M., Gurian, M., Schot, M., & Leijten, J. (2022) · Advanced Science · doi:10.1002/advs.202204609 · Cited by 60
Monavari, M., Homaeigohar, S., Medhekar, R., Nawaz, Q., Monavari, M., Zheng, K., & Boccaccini, A. R. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c23252 · Cited by 57
A dual crosslinking strategy to tailor rheological properties of gelatin methacryloyl
Zhou, M., Lee, B. H., & Tan, L. P. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.2017.02.003 · Cited by 62
“Large numbers of natural- or synthetic-derived h ydrogels have been studied for 3D bioprinting such as alginate([14]), collagen([15]), gelatin([16]) and poly(ethylene glycol) diacrylate([17]).”
BackgroundJung, J., Li, L., Yeh, C., Ren, X., & Sun, Y. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109961 · Cited by 58
Lan, X., Liang, Y., Erkut, E. J. N., Kunze, M., Mulet‐Sierra, A., Gong, T., Osswald, M., Ansari, K., Seikaly, H. R., Boluk, Y., et al. (2021) · The FASEB Journal · doi:10.1096/fj.202002081r · Cited by 65
Kesti, M., Fisch, P., Pensalfini, M., Mazza, E., & Zenobi‐Wong, M. (2016) · BioNanoMaterials · doi:10.1515/bnm-2016-0004 · Cited by 63
“BioInk (P:50–125 kPa, valve opening time 200 μs) and Cellink (P:35 kPa, valve opening time 1200 μs) were printed according to manufacturer’s recommendations using pneumatic microvalves whereas BioGel was printed with a direct extrusion system as suggested by the manufacturer similar to Vivoflow.”
BackgroundInfluentialAdvances in three-dimensional bioprinting for hard tissue engineering
Park, S., Jung, C. S., & Min, B. (2016) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-016-0145-4 · Cited by 59
“A novel bioink composed of nanocellulose and alginate was also utilized to 3D print cartilage with high fidelity and stability [86].”
MethodDevelopment of a Smart Bioink for Bioprinting Applications
Montero, F. E., Rezende, R. A., da Silva, J. V. L., & Sabino, M. A. (2019) · Frontiers in Mechanical Engineering · doi:10.3389/fmech.2019.00056 · Cited by 59
3D-Printed Objects for Multipurpose Applications
Hossain, N., Chowdhury, M. A., Shuvho, M. B. A., Kashem, M. A., & Kchaou, M. (2021) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-021-05664-w · Cited by 61
Sharma, V., Roozbahani, H., Alizadeh, M., & Handroos, H. (2021) · IEEE Access · doi:10.1109/access.2021.3071459 · Cited by 58
“3D printed resembling human ear utilizing CNF/alginate [91].”
MethodАржакова, О. В., Arzhakov, M. S., Badamshina, E. R., Bryuzgina, E. B., Bryuzgin, E. V., Bystrova, A. V., Vaganov, G., Vasilevskaya, V. V., Vdovichenko, A. Y., Gallyamov, M. O., et al. (2022) · Russian Chemical Reviews · doi:10.57634/rcr5062 · Cited by 60
Alam, A. M. M. N., Kim, C.-J., Kim, S.-H., Kumari, S., Lee, E.-Y., Hwang, Y.-H., & Joo, S.-T. (2024) · Food Research International · doi:10.1016/j.foodres.2024.114549 · Cited by 70
Chinga‐Carrasco, G., Ehman, N. V., Filgueira, D., Johansson, J., Vallejos, M. E., Felissia, F. E., Håkansson, J., & Área, M. C. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.05.014 · Cited by 55
High-strength hydrogel-based bioinks
Gao, F., Ruan, C., & Liu, W. (2019) · Materials Chemistry Frontiers · doi:10.1039/c9qm00373h · Cited by 55
Singh, Y. P., Moses, J. C., Bhardwaj, N., & Mandal, B. B. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100961 · Cited by 57
Heterogeneous and Composite Bioinks for 3D-Bioprinting of Complex Tissue
Rasouli, R., Sweeney, C. L., & Frampton, J. P. (2024) · Biomedical Materials & Devices · doi:10.1007/s44174-024-00171-7 · Cited by 61
Nanocellulose-Based Inks—Effect of Alginate Content on the Water Absorption of 3D Printed Constructs
Espinosa, E., Filgueira, D., Rodríguez, A., & Chinga‐Carrasco, G. (2019) · Bioengineering · doi:10.3390/bioengineering6030065 · Cited by 60
Sinha, S. K. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816805-9.00005-3 · Cited by 59
Recent Strategies in Fabrication of Gradient Hydrogels for Tissue Engineering Applications
Jo, H., Yoon, M., Gajendiran, M., & Kim, K. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201900300 · Cited by 57
TEMPO-Nanocellulose/Ca2+ Hydrogels: Ibuprofen Drug Diffusion and In Vitro Cytocompatibility
Fiorati, A., Negrini, N. C., Baschenis, E., Altomare, L., Farè, S., Schieroni, A. G., Piovani, D., Mendichi, R., Ferro, M., Castiglione, F., et al. (2020) · Materials · doi:10.3390/ma13010183 · Cited by 54
Luo, C., Xie, R., Zhang, J., Liu, Y., Li, Z., Zhang, Y., Zhang, X., Yuan, T., Chen, Y., & Fan, W. (2020) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2020.0053 · Cited by 57
Burger, D., Beaumont, M., Rosenau, T., & Tamada, Y. (2020) · Molecules · doi:10.3390/molecules25215097 · Cited by 58
Extrusion bioprinting of hydroxyethylcellulose-based bioink for cervical tumor model
Gospodinova, A., Nankov, V. M., Томов, С., Redzheb, M., & Petrov, P. D. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117793 · Cited by 57
Hernández-Sosa, A., Ramírez-Jiménez, R. A., Rojo, L., Boulmedais, F., Aguilar, M. R., Criado‐Gonzalez, M., & Hernández, R. (2022) · Polymers · doi:10.3390/polym14112229 · Cited by 56
Szychlinska, M. A., Bucchieri, F., Fucarino, A., Ronca, A., & D’Amora, U. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb13030118 · Cited by 58
Polyelectrolyte Gels: Fundamentals, Fabrication and Applications
Wanasingha, N., Dorishetty, P., Dutta, N. K., & Choudhury, N. R. (2021) · Gels · doi:10.3390/gels7030148 · Cited by 58
Bedell, M. L., Torres, A. L., Hogan, K. J., Wang, Z., Wang, B., Melchiorri, A. J., Grande-Allen, K. J., & Mikos, A. G. (2022) · Biofabrication · doi:10.1088/1758-5090/ac8768 · Cited by 56
“Elsewhere, NFC has been used successfully as a viable bioink material and characterized extensively within other biocompatible hydrogel systems using stains and microscopy techniques that were not utilized here, since the relatively high concentration (⩾10% w/v) of the CaP additive imparted a high opacity and also aut…”
An introductory review on advanced multifunctional materials
Abdelhamid, H. N. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e18060 · Cited by 55
“alginate can be 3D printed into cartilage structures such as a human ear and sheep meniscus (Figure 12) [261].”
BackgroundEze, F. N., Jayeoye, T. J., Eze, R. C., & Ovatlarnporn, C. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.128073 · Cited by 53
A fibrous cellulose paste formulation to manufacture structural parts using 3D printing by extrusion
Thibaut, C., Denneulin, A., du Roscoat, S. R., Beneventi, D., Orgéas, L., & Chaussy, D. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.01.076 · Cited by 55
Biofabrication of bacterial nanocellulose scaffolds with complex vascular structure
Sämfors, S., Karlsson, K., Sundberg, J., Markstedt, K., & Gatenholm, P. (2019) · Biofabrication · doi:10.1088/1758-5090/ab2b4f · Cited by 57
Self-citationIngole, V. H., Vuherer, T., Maver, U., Vinchurkar, A., Ghule, A. V., & Kokol, V. (2019) · Nanomaterials · doi:10.3390/nano10010025 · Cited by 53
Kummala, R., Véliz, D. S., Fang, Z., Xu, W., Abitbol, T., Xu, C., & Toivakka, M. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00107 · Cited by 54
Kuhnt, T., & Camarero‐Espinosa, S. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117159 · Cited by 59
Hsieh, C., Ariga, K., Shrestha, L. K., & Hsu, S. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.0c00920 · Cited by 53
A bibliometric indicators analysis of additive manufacturing research trends from 2010 to 2020
Jemghili, R., Taleb, A. A., & Mansouri, K. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2020-0274 · Cited by 55
A review on alginate-based bioinks, combination with other natural biomaterials and characteristics
Shams, E., Barzad, M. S., Mohamadnia, S., Tavakoli, O., & Mehrdadfar, A. (2022) · Journal of Biomaterials Applications · doi:10.1177/08853282221085690 · Cited by 56
“Cellulose and silk fibroin are also used for robust and hard tissue combined with alginate, which has a low viscosity.(40,42) Hyaluronic acid is a tremendous biocompatible material since it is generated in the human body.”
Background3D Bioprinting of Pectin-Cellulose Nanofibers Multicomponent Bioinks
Pitton, M., Fiorati, A., Buscemi, S., Melone, L., Farè, S., & Negrini, N. C. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.732689 · Cited by 55
“Moreover, for all the tested pectin concentrations (Table 1), addition of TOCNFs led to an increase of viscosity of the inks, promising for the development of printable multicomponent bioinks (Markstedt et al., 2015; Sawkins et al., 2015; Henriksson et al., 2017; Müller et al., 2017; Nguyen et al., 2017; Cui et al., 2…”
BackgroundGhelich, P., Kazemzadeh‐Narbat, M., Najafabadi, A. H., Samandari, M., Memić, A., & Tamayol, A. (2022) · Advanced NanoBiomed Research · doi:10.1002/anbr.202100073 · Cited by 56
Additive Manufacturing in Orthopedics: A Review
Zhao, Y., Wang, Z., Zhao, J., Hussain, M., & Wang, M. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c01072 · Cited by 52
Polysaccharide‐based biomaterials in a journey from 3D to 4D printing
Shokrani, H., Shokrani, A., Seidi, F., Mashayekhi, M., Kar, S., Nedeljković, D., Kuang, T., Saeb, M. R., & Mozafari, M. (2023) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10503 · Cited by 55
Dutta, S. D., Patil, T. V., Ganguly, K., Randhawa, A., & Lim, K. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.05.014 · Cited by 76
3D Bioprinting: The Emergence of Programmable Biodesign
Carreira, S. C., Begum, R., & Perriman, A. W. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900554 · Cited by 53
Henrionnet, C., Pourchet, L., Neybecker, P., Messaoudi, O., Gillet, P., Lœuille, D., Mainard, D., Marquette, C. A., & Pinzano, A. (2020) · Stem Cells International · doi:10.1155/2020/2487072 · Cited by 52
“Conversely, cell viability could be affected by shear forces applied during the mixing of the bioink or during long postprinting cross-linking processes [69].”
BackgroundMicrovascular Tissue Engineering—A Review
Vajda, J., Milojević, M., Maver, U., & Vihar, B. (2021) · Biomedicines · doi:10.3390/biomedicines9060589 · Cited by 61
Štiglic, A. D., Kargl, R., Beaumont, M., Strauß, C., Makuc, D., Egger, D., Plavec, J., Rojas, O. J., Kleinschek, K. S., & Mohan, T. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00534 · Cited by 51
Challenges and recent trends with the development of hydrogel fiber for biomedical applications
Ansar, R., Saqib, S., Mukhtar, A., Niazi, M. B. K., Shahid, M., Jahan, Z., Kakar, S. J., Uzair, B., Mubashir, M., Ullah, S., et al. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131956 · Cited by 55
Chandra, D. K., Reis, R. L., Kundu, S. C., Kumar, A., & Mahapatra, C. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c00166 · Cited by 54
Microfluidic Encapsulation of Single Cells by Alginate Microgels Using a Trigger-Gellified Strategy
Shao, F., Yu, L., Zhang, Y., An, C., Zhang, H., Zhang, Y., Xiong, Y., & Wang, H. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.583065 · Cited by 59
3D bioprinted tumor model with extracellular matrix enhanced bioinks for nanoparticle evaluation
Chen, Y., Xu, L., Li, W., Chen, W., He, Q., Zhang, X., Tang, J., Wang, Y., Liu, B., & Liu, J. (2022) · Biofabrication · doi:10.1088/1758-5090/ac48e4 · Cited by 58
“The line width of bioinks was used to evaluate the formability of 3D printed construct [40].”
Zhang, C., Elvitigala, K. C. M. L., Mubarok, W., Okano, Y., & Sakai, S. (2024) · Virtual and Physical Prototyping · doi:10.1080/17452759.2024.2400330 · Cited by 55
“The shear-thinning property is beneficial as it can minimise the chances of clogging and enhance cell viability during the extrusion process [15,16].”
Tehrani, Z., Nordli, H. R., Pukstad, B. S., Gethin, D. T., & Chinga‐Carrasco, G. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.024 · Cited by 54
Advances in 3-Dimensional Printing in Otolaryngology: A Review
VanKoevering, K. K., Hollister, S. J., & Green, G. E. (2016) · JAMA Otolaryngology–Head & Neck Surgery · doi:10.1001/jamaoto.2016.3002 · Cited by 50
Three-dimensional bioprinting of volumetric tissues and organs
Kilian, D., Ahlfeld, T., Akkineni, A. R., Lode, A., & Gelinsky, M. (2017) · MRS Bulletin · doi:10.1557/mrs.2017.164 · Cited by 52
Chen, Y., Wang, Y., Yang, Q., Liao, Y., Zhu, B., Zhao, G., Shen, R., Lu, X., & Qu, S. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb01196f · Cited by 53
Bioengineering models of female reproduction
Zubizarreta, M. E., & Xiao, S. (2020) · Bio-Design and Manufacturing · doi:10.1007/s42242-020-00082-8 · Cited by 50
Tsai, Y., Théato, P., Huang, C., & Hsu, S. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100778 · Cited by 53
Cellulose-based 3D printing bio-inks for biomedical applications: A review
Sharma, C., Raza, M. A., Purohit, S. D., Pathak, P., Gautam, S., Corridon, P. R., & Han, S. S. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.141174 · Cited by 50
Metadata
- Authors
- Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P.
- Affiliations
- Wallenberg Wood Science Center (SE)
- Wallenberg Wood Science Center and ‡Biopolymer Technology, Department of Chemical and Biological Engineering, Chalmers University of Technology, Gothenburg 412 96, Sweden
- Corresponding author
- Gatenholm, Paul
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-04-07
- Volume
- 16
- Issue
- 5
- Pages
- 1489-1496
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1994903148
- Cited by
- 1,528
- References
- 39
- Citations by year
- 2026: 64 · 2025: 90 · 2024: 116 · 2023: 151 · 2022: 198 · 2021: 204 · 2020: 198 · 2019: 177 · 2018: 147 · 2017: 99 · 2016: 73 · 2015: 9
- FWCI
- 54.39
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Chalmers Research (Chalmers University of Technology) (submittedVersion)
- Funders
- European Commission
- VINNOVA
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- 3D bioprinting, human chondrocytes, cartilage tissue engineering, nanocellulose, alginate, bioinks, cellulose nanofibers, shear thinning, hydrogels, meniscus, auricular cartilage, cell viability, shape fidelity
- MeSH terms
- Alginates, Animals, Cartilage, Cellulose, Hexuronic Acids, Humans, Chondrocytes, Hydrogel, Polyethylene Glycol Dimethacrylate, Glucuronic Acid, Tissue Engineering, Regenerative Medicine, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.