3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications
The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Abstract
The introduction of 3D bioprinting is expected to revolutionize the field of tissue engineering and regenerative medicine. The 3D bioprinter is able to dispense materials while moving in X, Y, and Z directions, which enables the engineering of complex structures from the bottom up. In this study, a bioink that combines the outstanding shear thinning properties of nanofibrillated cellulose (NFC) with the fast cross-linking ability of alginate was formulated for the 3D bioprinting of living soft tissue with cells. Printability was evaluated with concern to printer parameters and shape fidelity. The shear thinning behavior of the tested bioinks enabled printing of both 2D gridlike structures as well as 3D constructs. Furthermore, anatomically shaped cartilage structures, such as a human ear and sheep meniscus, were 3D printed using MRI and CT images as blueprints. Human chondrocytes bioprinted in the noncytotoxic, nanocellulose-based bioink exhibited a cell viability of 73% and 86% after 1 and 7 days of 3D culture, respectively. On the basis of these results, we can conclude that the nanocellulose-based bioink is a suitable hydrogel for 3D bioprinting with living cells. This study demonstrates the potential use of nanocellulose for 3D bioprinting of living tissues and organs.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [28]
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Alginate Hydrogels as Biomaterials
Augst, A. D., Kong, H. J., & Mooney, D. J. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600069 · Cited by 1,839
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Bacterial cellulose as a potential scaffold for tissue engineering of cartilage
Svensson, A., Nicklasson, E., Harrah, T., Panilaitis, B., Kaplan, D. L., Brittberg, M., & Gatenholm, P. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.049 · Cited by 1,026
Self-citationSurface engineering approaches to micropattern surfaces for cell-based assays
Falconnet, D., Csucs, G., Michelle Grandin, H., & Textor, M. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.024 · Cited by 944
Wågberg, L., Decher, G., Norgren, M., Lindström, T., Ankerfors, M., & Axnäs, K. (2008) · Langmuir · doi:10.1021/la702481v · Cited by 867
Research works printed but not linked: 1
- Wågberg L., 1987, Colloids Surf., 27, 163, 10.1016/0166-6622(87)80335-9 · doi:10.1016/0166-6622(87)80335-9 · Paper page
Cited by
Items 201–300 of 1,001
Multicomponent polysaccharide alginate-based bioinks
Piras, C. C., & Smith, D. K. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb01005g · Cited by 174
Choe, G., Oh, S., Seok, J. M., Park, S. A., & Lee, J. Y. (2019) · Nanoscale · doi:10.1039/c9nr07643c · Cited by 179
Pharmaceutical and biomedical applications of cellulose nanofibers: a review
Pandey, A. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-021-01182-2 · Cited by 174
Cellulose‐Nanofiber‐Enabled 3D Printing of a Carbon‐Nanotube Microfiber Network
Li, Y., Zhu, H., Wang, Y., Ray, U., Zhu, S., Dai, J., Chen, C., Fu, K., Jang, S., Henderson, D., et al. (2017) · Small Methods · doi:10.1002/smtd.201700222 · Cited by 172
Huang, C.-T., Kumar Shrestha, L., Ariga, K., & Hsu, S.-H. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb01594a · Cited by 178
Dima, S.-O., Panaitescu, D.-M., Orban, C., Ghiurea, M., Doncea, S.-M., Fierascu, R., Nistor, C., Alexandrescu, E., Nicolae, C.-A., Trică, B., et al. (2017) · Polymers · doi:10.3390/polym9080374 · Cited by 166
Huang, L., Du, X., Fan, S., Yang, G., Shao, H., Li, D., Cao, C., Zhu, Y., Zhu, M., & Zhang, Y. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.05.080 · Cited by 170
Natural Polymers for Organ 3D Bioprinting
Liu, F., Chen, Q., Liu, C., Ao, Q., Tian, X., Fan, J., Tong, H., & Wang, X. (2018) · Polymers · doi:10.3390/polym10111278 · Cited by 170
Recent advances on polymeric hydrogels as wound dressings
Pan, Z., Ye, H., & Wu, D. (2021) · APL Bioengineering · doi:10.1063/5.0038364 · Cited by 163
Solidification of 3D Printed Nanofibril Hydrogels into Functional 3D Cellulose Structures
Håkansson, K. M. O., Henriksson, I. C., de la Peña Vázquez, C., Kuzmenko, V., Markstedt, K., Enoksson, P., & Gatenholm, P. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600096 · Cited by 160
Self-citationEssential steps in bioprinting: From pre- to post-bioprinting
Datta, P., Barui, A., Wu, Y., Ozbolat, V., Moncal, K. K., & Ozbolat, I. T. (2018) · Biotechnology Advances · doi:10.1016/j.biotechadv.2018.06.003 · Cited by 165
Effects of Processing Parameters of 3D Bioprinting on the Cellular Activity of Bioinks
Adhikari, J., Roy, A., Das, A., Ghosh, M., Thomas, S., Sinha, A., Kim, J., & Saha, P. (2020) · Macromolecular Bioscience · doi:10.1002/mabi.202000179 · Cited by 176
Surface-Modified Nanocellulose for Application in Biomedical Engineering and Nanomedicine: A Review
Tortorella, S., Vetri Buratti, V., Maturi, M., Sambri, L., Comes Franchini, M., & Locatelli, E. (2020) · International Journal of Nanomedicine · doi:10.2147/ijn.s266103 · Cited by 160
Cellulose nanocrystal based multifunctional nanohybrids
Lizundia, E., Puglia, D., Nguyen, T.-D., & Armentano, I. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100668 · Cited by 163
3D Bioprinting Technologies for Hard Tissue and Organ Engineering
Wang, X., Ao, Q., Tian, X., Fan, J., Wei, Y., Hou, W., Tong, H., & Bai, S. (2016) · Materials · doi:10.3390/ma9100802 · Cited by 163
Cheng, K.-C., Huang, C.-F., Wei, Y., & Hsu, S.-H. (2019) · NPG Asia Materials · doi:10.1038/s41427-019-0124-z · Cited by 161
Toward Biomimetic Scaffolds for Tissue Engineering: 3D Printing Techniques in Regenerative Medicine
Chung, J. J., Im, H.-J., Kim, S. H., Park, J. W., & Jung, Y. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.586406 · Cited by 172
Biofabrication of natural hydrogels for cardiac, neural, and bone Tissue engineering Applications
Elkhoury, K., Morsink, M., Sanchez-Gonzalez, L., Kahn, C., Tamayol, A., & Arab-Tehrany, E. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.03.040 · Cited by 162
“Nanocellulose–alginate bioink was successfully utilized by microextrusion bioprinters to fabricate human chondrocyte-laden natural hydrogels that maintained high cell viability and proliferation during in vitro culture [123,124].”
MethodRecent Progress in Cartilage Tissue Engineering—Our Experience and Future Directions
Liu, Y., Zhou, G., & Cao, Y. (2017) · Engineering · doi:10.1016/j.eng.2017.01.010 · Cited by 158
“Cell-laden hydrogels have also been extensively investigated for use as bioink for the 3D bioprinting of cartilage with biomimetic structure and function [38,39].”
BackgroundGeneral scenarios of cellulose and its use in the biomedical field
Gopi, S., Balakrishnan, P., Divya, C., Poovathankandy, D., & Thomas, S. (2019) · Materials Today Chemistry · doi:10.1016/j.mtchem.2019.04.012 · Cited by 172
3D bioprinting via an in situ crosslinking technique towards engineering cartilage tissue
Galarraga, J. H., Kwon, M. Y., & Burdick, J. A. (2019) · Scientific Reports · doi:10.1038/s41598-019-56117-3 · Cited by 166
Françon, H., Wang, Z., Marais, A., Mystek, K., Piper, A., Granberg, H., Malti, A., Gatenholm, P., Larsson, P. A., & Wågberg, L. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909383 · Cited by 161
Self-citationTailor-made conductive inks from cellulose nanofibrils for 3D printing of neural guidelines
Kuzmenko, V., Karabulut, E., Pernevik, E., Enoksson, P., & Gatenholm, P. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.01.097 · Cited by 154
Self-citationAdvances in 3D Printing for Tissue Engineering
Zaszczyńska, A., Moczulska-Heljak, M., Gradys, A., & Sajkiewicz, P. (2021) · Materials · doi:10.3390/ma14123149 · Cited by 169
Gutierrez, E., Burdiles, P. A., Quero, F., Fluxá, P. P., Olate‐Moya, F., & Palza, H. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01048 · Cited by 160
Recent Progress on Cellulose‐Based Ionic Compounds for Biomaterials
Yang, Y., Lu, Y., Zeng, K., Heinze, T. J., Groth, T., & Zhang, K. (2020) · Advanced Materials · doi:10.1002/adma.202000717 · Cited by 162
Hydrogel-Based Bioinks for 3D Bioprinting in Tissue Regeneration
Ramiah, P., du Toit, L. C., Choonara, Y. E., Kondiah, P. P. D., & Pillay, V. (2020) · Frontiers in Materials · doi:10.3389/fmats.2020.00076 · Cited by 148
Park, J., Lee, S. J., Chung, S., Lee, J. H., Kim, W. D., Lee, J. Y., & Park, S. A. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.10.069 · Cited by 165
Advanced cell culture platforms: a growing quest for emulating natural tissues
Mirbagheri, M., Adibnia, V., Hughes, B. R., Waldman, S. D., Banquy, X., & Hwang, D. K. (2019) · Materials Horizons · doi:10.1039/c8mh00803e · Cited by 168
Naghieh, S., Sarker, M., Sharma, N. K., Barhoumi, Z., & Chen, X. (2019) · Applied Sciences · doi:10.3390/app10010292 · Cited by 150
3D Bioprinted Nanocellulose-Based Hydrogels for Tissue Engineering Applications: A Brief Review
Athukoralalage, S. S. A., Balu, R., Dutta, N. K., & Choudhury, N. R. (2019) · Polymers · doi:10.3390/polym11050898 · Cited by 160
Rheology as a Tool for Fine-Tuning the Properties of Printable Bioinspired Gels
Bercea, M. (2023) · Molecules · doi:10.3390/molecules28062766 · Cited by 163
Exploiting Advanced Hydrogel Technologies to Address Key Challenges in Regenerative Medicine
Foyt, D. A., Norman, M. D. A., Yu, T. T. L., & Gentleman, E. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201700939 · Cited by 150
Williams, D. F., Thayer, P., Martinez, H., Gatenholm, E., & Khademhosseini, A. (2018) · Bioprinting · doi:10.1016/j.bprint.2018.02.003 · Cited by 166
Human stem cell decorated nanocellulose threads for biomedical applications
Mertaniemi, H., Escobedo‐Lucea, C., Sanz-García, A., Gandía, C., Mäkitie, A. A., Partanen, J. P., Ikkala, O. T., & Yliperttula, M. L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.12.020 · Cited by 152
Jessop, Z. M., Al-Sabah, A., Gao, N., Kyle, S., Thomas, B., Badiei, N., Hawkins, K., & Whitaker, I. S. (2019) · Biofabrication · doi:10.1088/1758-5090/ab0631 · Cited by 146
Zhang, X., Liu, Y., Luo, C., Zhai, C., Li, Z., Zhang, Y., Yuan, T., Dong, S., Zhang, J., & Fan, W. (2021) · Materials Science and Engineering: C · doi:10.1016/j.msec.2020.111388 · Cited by 154
Hassan, M., Dave, K., Chandrawati, R., Dehghani, F., & Gomes, V. G. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.109340 · Cited by 146
Kilian, D., Ahlfeld, T., Akkineni, A. R., Bernhardt, A., Gelinsky, M., & Lode, A. (2020) · Scientific Reports · doi:10.1038/s41598-020-65050-9 · Cited by 157
3D Printing of Hydrogels for Stretchable Ionotronic Devices
Ge, G., Wang, Q., Zhang, Y., Alshareef, H. N., & Dong, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202107437 · Cited by 154
Tyrosinase-doped bioink for 3D bioprinting of living skin constructs
Shi, Y., Xing, T. L., Zhang, H. B., Yin, R. X., Yang, S. M., Wei, J., & Zhang, W. J. (2018) · Biomedical Materials · doi:10.1088/1748-605x/aaa5b6 · Cited by 141
Responsive biomaterials for 3D bioprinting: A review
Fu, Z., Ouyang, L., Xu, R., Yang, Y., & Sun, W. (2022) · Materials Today · doi:10.1016/j.mattod.2022.01.001 · Cited by 147
Biomimetic Inks Based on Cellulose Nanofibrils and Cross-Linkable Xylans for 3D Printing
Markstedt, K., Escalante, A., Toriz, G., & Gatenholm, P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13400 · Cited by 143
Self-citationRecent advances in 3D bioprinting of vascularized tissues
Zhang, Y., Kumar, P., Lv, S., Xiong, D., Zhao, H., Cai, Z., & Zhao, X. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109398 · Cited by 155
hadad, A. A. E., Rosa-Sainz, A., Cañete, R., Peralta, E., Begines, B., Balbuena, M., Alcudia, A., & Torres, Y. (2023) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2023.100760 · Cited by 157
4D printing of patterned multimaterial magnetic hydrogel actuators
Simińska‐Stanny, J., Nizioł, M., Szymczyk‐Ziółkowska, P., Brożyna, M., Junka, A., Shavandi, A., & Podstawczyk, D. A. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102506 · Cited by 146
Engineering multifunctional dynamic hydrogel for biomedical and tissue regenerative applications
Yin, B., Gosecka, M., Bodaghi, M., Crespy, D., Youssef, G., Dodda, J. M., Wong, S. H. D., Imran, A. B., Gosecki, M., Jobdeedamrong, A., et al. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.150403 · Cited by 160
Sources, extractions, and applications of alginate: a review
Rahman, M. M., Shahid, M. A., Hossaın, M. T., Sheikh, M. S., Rahman, M. S., Uddin, N., Rahim, A., Khan, R. A., & Hossain, I. (2024) · Discover Applied Sciences · doi:10.1007/s42452-024-06151-2 · Cited by 169
Shie, M., Chang, W., Wei, L.-J., Huang, Y., Chen, C.-H., Shih, C., Chen, Y., & Shen, Y. (2017) · Materials · doi:10.3390/ma10020136 · Cited by 147
“In 2015, Markstedt’s group [11] Preprints (www.”
In Vivo Chondrogenesis in 3D Bioprinted Human Cell-laden Hydrogel Constructs
Möller, T., Amoroso, M., Hägg, D. A., Brantsing, C., Rotter, N., Apelgren, P., Lindahl, A. H., Kölby, L., & Gatenholm, P. (2017) · Plastic & Reconstructive Surgery Global Open · doi:10.1097/gox.0000000000001227 · Cited by 158
“18 Although substantial progress has been made, the lack of mechanical and structural integrity of the 3D constructs still represents a major challenge.”
Self-citation3D Bioprinting Strategies for the Regeneration of Functional Tubular Tissues and Organs
Jeong, H., Nam, H., Jang, J., & Lee, S. (2020) · Bioengineering · doi:10.3390/bioengineering7020032 · Cited by 154
Current Advances in 3D Bioprinting Technology and Its Applications for Tissue Engineering
Yu, J., Park, S. A., Kim, W. D., Ha, T., Xin, Y.-Z., Lee, J., & Lee, D. (2020) · Polymers · doi:10.3390/polym12122958 · Cited by 129
3D printing to innovate biopolymer materials for demanding applications: A review
Li, N., Qiao, D., Zhao, S., Lin, Q., Zhang, B., & Xie, F. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100459 · Cited by 142
Alginate-Based Bioinks for 3D Bioprinting and Fabrication of Anatomically Accurate Bone Grafts
Gonzalez‐Fernandez, T., Tenorio, A. J., Campbell, K. T., Silva, E. A., & Leach, J. K. (2020) · Tissue Engineering Part A · doi:10.1089/ten.tea.2020.0305 · Cited by 149
Surface Modification of Bacterial Cellulose for Biomedical Applications
Aditya, T., Allain, J. P., Jaramillo, C., & Restrepo, A. M. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23020610 · Cited by 148
Kadier, A., Ilyas, R. A., Huzaifah, M. R. M., Harihastuti, N., Sapuan, S. M., Harussani, M. M., Azlin, M. N. M., Yuliasni, R., Ibrahim, R., Atikah, M. S. N., et al. (2021) · Polymers · doi:10.3390/polym13193365 · Cited by 140
Chinga‐Carrasco, G. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00053 · Cited by 142
Polymeric Materials, Advances and Applications in Tissue Engineering: A Review
Socci, M. C., Rodríguez, G., Oliva, E., Fushimi, S., Takabatake, K., Nagatsuka, H., Felice, C. J., & Rodríguez, A. P. (2023) · Bioengineering · doi:10.3390/bioengineering10020218 · Cited by 158
“…of vascularization, and an immunological rejection against the scaffold that may occur. at the interface of the tibialis anterior/tibial bone and the masseter muscle/mandible bone in a murine model and promoted muscle, bone, and cartilage formation at the interface with long and flat bone [124].”
InfluentialSimulations of 3D bioprinting: predicting bioprintability of nanofibrillar inks
Göhl, J., Markstedt, K., Mark, A., Håkansson, K., Gatenholm, P., & Edelvik, F. (2018) · Biofabrication · doi:10.1088/1758-5090/aac872 · Cited by 132
Self-citationPlant-Derived Biomaterials: A Review of 3D Bioprinting and Biomedical Applications
Jovic, T. H., Kungwengwe, G., Mills, A. C., & Whitaker, I. S. (2019) · Frontiers in Mechanical Engineering · doi:10.3389/fmech.2019.00019 · Cited by 132
Wang, X., Wang, Q., & Xu, C. (2020) · Bioengineering · doi:10.3390/bioengineering7020040 · Cited by 133
Rheological evaluation of Laponite/alginate inks for 3D extrusion-based printing
Dávila, J. L., & d’Ávila, M. A. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2876-y · Cited by 143
“[17] used nano-fibrillated cellulose with alginate to obtain a shear-thinning behavior to bioprint living soft tissue.”
MethodPreparing printable bacterial cellulose based gelatin gel to promote in vivo bone regeneration
Wang, X., Tang, S., Chai, S., Wang, P., Qin, J., Pei, W., Bian, H., Jiang, Q. Y., & Huang, C. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118342 · Cited by 141
Designing and transforming yield-stress fluids
Nelson, A. Z., Schweizer, K. S., Rauzan, B. M., Nuzzo, R. G., Vermant, J., & Ewoldt, R. H. (2019) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2019.06.002 · Cited by 147
“Associating polymers or fibrils nanofibrillated cellulose in water[9] xanthan gum in water[14] 1 – 500 Pa High thixotropic time (at low concentrations) High yield strain Low volume fraction Very few predictive models”
BackgroundYang, J. H., An, X., Liu, L., Tang, S., Cao, H., Xu, Q., & Liu, H. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116881 · Cited by 138
Classification, processing, and applications of bioink and 3D bioprinting: A detailed review
Raees, S., Ullah, F., Javed, F. T., Akil, H. M., Khan, M. J., Safdar, M. M., Din, I. U., Alotaibi, M. A., Alharthi, A. I., Bakht, M. A., et al. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123476 · Cited by 141
Goulart, E., de Caires-Junior, L. C., Telles-Silva, K. A., Araujo, B. H. S., Rocco, S. A., Sforca, M., de Sousa, I. L., Kobayashi, G. S., Musso, C. M., Assoni, A. F., et al. (2020) · Biofabrication · doi:10.1088/1758-5090/ab4a30 · Cited by 129
Marzio, N. D., Eglin, D., Serra, T., & Moroni, L. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00326 · Cited by 144
Advanced Strategies for 3D Bioprinting of Tissue and Organ Analogs Using Alginate Hydrogel Bioinks
Gao, Q., Kim, B.-S., & Gao, G. (2021) · Marine Drugs · doi:10.3390/md19120708 · Cited by 141
Mechanical Properties of Composite Hydrogels of Alginate and Cellulose Nanofibrils
Aarstad, O. A., Heggset, E. B., Pedersen, I. S., Bjørnøy, S. H., Syverud, K., & Strand, B. L. (2017) · Polymers · doi:10.3390/polym9080378 · Cited by 143
Enabling personalized implant and controllable biosystem development through 3D printing
Nagarajan, N., Dupret‐Bories, A., Karabulut, E., Zorlutuna, P., & Vrana, N. E. (2018) · Biotechnology Advances · doi:10.1016/j.biotechadv.2018.02.004 · Cited by 141
3D cell bioprinting of self-assembling peptide-based hydrogels
Raphael, B., Khalil, T., Workman, V. L., Smith, A. M., Brown, C., Streuli, C. H., Saiani, A., & Domingos, M. A. N. (2017) · Materials Letters · doi:10.1016/j.matlet.2016.12.127 · Cited by 143
Zhang, X., Morits, M., Jonkergouw, C., Ora, A., Valle-Delgado, J. J., Farooq, M., Ajdary, R., Huan, S., Linder, M., Rojas, O., et al. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.9b01745 · Cited by 126
Surface modified cellulose nanomaterials: a source of non-spherical nanoparticles for drug delivery
Khine, Y. Y., & Stenzel, M. H. (2020) · Materials Horizons · doi:10.1039/c9mh01727e · Cited by 139
Wei, J., Wang, B., Li, Z., Wu, Z., Zhang, M., Sheng, N., Liang, Q., Wang, H., & Chen, S. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116207 · Cited by 138
Bioresorbable Polymers: Advanced Materials and 4D Printing for Tissue Engineering
Saska, S., Pilatti, L., Blay, A., & Shibli, J. A. (2021) · Polymers · doi:10.3390/polym13040563 · Cited by 136
Chondrocytes and stem cells in 3D-bioprinted structures create human cartilage in vivo
Apelgren, P., Amoroso, M., Lindahl, A. H., Brantsing, C., Rotter, N., Gatenholm, P., & Kölby, L. (2017) · PLoS ONE · doi:10.1371/journal.pone.0189428 · Cited by 139
Self-citationAll‐in‐One Cellulose Nanocrystals for 3D Printing of Nanocomposite Hydrogels
Wang, J., Chiappone, A., Roppolo, I., Shao, F., Fantino, E., Lorusso, M., Rentsch, D., Dietliker, K., Pirri, C. F., & Grützmacher, H. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201710951 · Cited by 131
3D Printing of Silk Fibroin for Biomedical Applications
Wang, Q., Han, G., Yan, S., & Zhang, Q. (2019) · Materials · doi:10.3390/ma12030504 · Cited by 131
Developments and Opportunities for 3D Bioprinted Organoids
Ren, Y., Yang, X., Ma, Z., Sun, X., Zhang, Y., Li, W., Yang, H., Qiang, L., Yang, Z., Liu, Y., et al. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.v7i3.364 · Cited by 126
3D printing of natural fiber and composites: A state-of-the-art review
Bi, X., & Huang, R. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.111065 · Cited by 139
Rheology in Product Development: An Insight into 3D Printing of Hydrogels and Aerogels
Barrulas, R. V., & Corvo, M. C. (2023) · Gels · doi:10.3390/gels9120986 · Cited by 158
Acetylated Nanocellulose for Single-Component Bioinks and Cell Proliferation on 3D-Printed Scaffolds
Ajdary, R., Huan, S., Ezazi, N. Z., Xiang, W., Grande, R., Santos, H. A., & Rojas, O. J. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00527 · Cited by 133
Yadav, C., Saini, A., Zhang, W., You, X., Chauhan, I., Mohanty, P., & Li, X. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.11.038 · Cited by 130
The use of cellulose in bio-derived formulations for 3D/4D printing: A review
Gauss, C., Pickering, K. L., & Muthe, L. P. (2021) · Composites Part C Open Access · doi:10.1016/j.jcomc.2021.100113 · Cited by 149
An overview of the development status and applications of cellulose-based functional materials
Li, X., Wan, C., Tao, T., Chai, H., Huang, Q., Chai, Y., & Wu, Y. (2023) · Cellulose · doi:10.1007/s10570-023-05616-8 · Cited by 139
“As the field of 3D printing technology continues to progress, Markstedt et al. (2015) created a bioink by combining the superior shear-thinning properties of NFC and the rapid cross-linking ability of alginate.”
3D printing in biomedical engineering: Processes, materials, and applications
Lai, J., Wang, C., & Wang, M. (2021) · Applied Physics Reviews · doi:10.1063/5.0024177 · Cited by 135
Three‐dimensional printing in orthopaedic surgery: review of current and future applications
Mulford, J., Babazadeh, S., & Mackay, N. (2016) · ANZ Journal of Surgery · doi:10.1111/ans.13533 · Cited by 132
Heggset, E. B., Strand, B. L., Sundby, K. W., Simon, S., Chinga‐Carrasco, G., & Syverud, K. (2018) · Cellulose · doi:10.1007/s10570-018-2142-3 · Cited by 127
“In the recent years, in vitro studies for CNF scaffolds seeded with cells have been reported (Alexandrescu et al. 2013; Markstedt et al. 2015; Martı́nez Ávila et al. 2016; Muller et al. 2017; Rashad et al. 2017).”
BackgroundInfluentialTan, B., Gan, S., Wang, X., Liu, W., & Li, X. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb00172h · Cited by 135
Sustainability in Wood Products: A New Perspective for Handling Natural Diversity
Schubert, M., Panzarasa, G., & Burgert, I. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00360 · Cited by 135
The Colloidal Properties of Nanocellulose
Benselfelt, T., Kummer, N., Nordenström, M., Fall, A. B., Nyström, G., & Wågberg, L. (2023) · ChemSusChem · doi:10.1002/cssc.202201955 · Cited by 132
Engineering inkjet bioprinting processes toward translational therapies
Angelopoulos, I., Allenby, M. C., Lim, M., & Zamorano, M. (2020) · Biotechnology and Bioengineering · doi:10.1002/bit.27176 · Cited by 122
3D Bioprinting at the Frontier of Regenerative Medicine, Pharmaceutical, and Food Industries
Ramadan, Q., & Zourob, M. M. (2021) · Frontiers in Medical Technology · doi:10.3389/fmedt.2020.607648 · Cited by 142
“Various gelation processes are used, which may be determined by bioink material properties and composition, such as ionic (36), thermal (40), stereocomplex (29), photocrosslinking (41), enzymatic (42), and click chemistry (43); (c) Biocompatibility: hydrophilicity and materials with celladhesive sites enhance cell sur…”
BackgroundMechanically Tunable Bioink for 3D Bioprinting of Human Cells
Forget, A., Blaeser, A., Mießmer, F., Köpf, M., Campos, D. F. D., Voelcker, N. H., Blencowe, A., Fischer, H., & Shastri, V. P. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700255 · Cited by 132
Composites of waterborne polyurethane and cellulose nanofibers for 3D printing and bioapplications
Chen, R., Huang, C., & Hsu, S. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.02.025 · Cited by 124
Chen, Y., Xiong, X., Liu, X., Cui, R., Wang, C., Zhao, G., Zhi, W., Lu, M., Duan, K., Weng, J., et al. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb00060d · Cited by 124
Biocompatibility of Biomaterials for Tissue Regeneration or Replacement
Raut, H. K., Das, R., Liu, Z., Liu, X., & Ramakrishna, S. (2020) · Biotechnology Journal · doi:10.1002/biot.202000160 · Cited by 130
Biopolymer Nanoscale Assemblies as Building Blocks for New Materials: A Review
Pei, Y., Wang, L., Tang, K., & Kaplan, D. L. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008552 · Cited by 126
Mahendiran, B., Muthusamy, S., Sampath, S., Jaisankar, S. N., Popat, K. C., Selvakumar, R., & Krishnakumar, G. S. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.04.179 · Cited by 126
Metadata
- Authors
- Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P.
- Affiliations
- Wallenberg Wood Science Center (SE)
- Wallenberg Wood Science Center and ‡Biopolymer Technology, Department of Chemical and Biological Engineering, Chalmers University of Technology, Gothenburg 412 96, Sweden
- Corresponding author
- Gatenholm, Paul
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-04-07
- Volume
- 16
- Issue
- 5
- Pages
- 1489-1496
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1994903148
- Cited by
- 1,528
- References
- 39
- Citations by year
- 2026: 64 · 2025: 90 · 2024: 116 · 2023: 151 · 2022: 198 · 2021: 204 · 2020: 198 · 2019: 177 · 2018: 147 · 2017: 99 · 2016: 73 · 2015: 9
- FWCI
- 54.39
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Chalmers Research (Chalmers University of Technology) (submittedVersion)
- Funders
- European Commission
- VINNOVA
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- 3D bioprinting, human chondrocytes, cartilage tissue engineering, nanocellulose, alginate, bioinks, cellulose nanofibers, shear thinning, hydrogels, meniscus, auricular cartilage, cell viability, shape fidelity
- MeSH terms
- Alginates, Animals, Cartilage, Cellulose, Hexuronic Acids, Humans, Chondrocytes, Hydrogel, Polyethylene Glycol Dimethacrylate, Glucuronic Acid, Tissue Engineering, Regenerative Medicine, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.