3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications
The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Abstract
The introduction of 3D bioprinting is expected to revolutionize the field of tissue engineering and regenerative medicine. The 3D bioprinter is able to dispense materials while moving in X, Y, and Z directions, which enables the engineering of complex structures from the bottom up. In this study, a bioink that combines the outstanding shear thinning properties of nanofibrillated cellulose (NFC) with the fast cross-linking ability of alginate was formulated for the 3D bioprinting of living soft tissue with cells. Printability was evaluated with concern to printer parameters and shape fidelity. The shear thinning behavior of the tested bioinks enabled printing of both 2D gridlike structures as well as 3D constructs. Furthermore, anatomically shaped cartilage structures, such as a human ear and sheep meniscus, were 3D printed using MRI and CT images as blueprints. Human chondrocytes bioprinted in the noncytotoxic, nanocellulose-based bioink exhibited a cell viability of 73% and 86% after 1 and 7 days of 3D culture, respectively. On the basis of these results, we can conclude that the nanocellulose-based bioink is a suitable hydrogel for 3D bioprinting with living cells. This study demonstrates the potential use of nanocellulose for 3D bioprinting of living tissues and organs.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [28]
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Alginate Hydrogels as Biomaterials
Augst, A. D., Kong, H. J., & Mooney, D. J. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600069 · Cited by 1,839
Printing and Prototyping of Tissues and Scaffolds
Derby, B. (2012) · Science · doi:10.1126/science.1226340 · Cited by 1,108
Bacterial cellulose as a potential scaffold for tissue engineering of cartilage
Svensson, A., Nicklasson, E., Harrah, T., Panilaitis, B., Kaplan, D. L., Brittberg, M., & Gatenholm, P. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.049 · Cited by 1,026
Self-citationSurface engineering approaches to micropattern surfaces for cell-based assays
Falconnet, D., Csucs, G., Michelle Grandin, H., & Textor, M. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.024 · Cited by 944
Wågberg, L., Decher, G., Norgren, M., Lindström, T., Ankerfors, M., & Axnäs, K. (2008) · Langmuir · doi:10.1021/la702481v · Cited by 867
Research works printed but not linked: 1
- Wågberg L., 1987, Colloids Surf., 27, 163, 10.1016/0166-6622(87)80335-9 · doi:10.1016/0166-6622(87)80335-9 · Paper page
Cited by
Items 301–400 of 1,001
3D printing of bio-instructive materials: Toward directing the cell
Zieliński, P. S., Gudeti, P. K. R., Rikmanspoel, T., & Włodarczyk‐Biegun, M. K. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.04.008 · Cited by 145
Highly Elastic Biodegradable Single-Network Hydrogel for Cell Printing
Xu, C., Lee, W., Dai, G., & Hong, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01294 · Cited by 129
Nanocellulose/bioactive glass cryogels as scaffolds for bone regeneration
Ferreira, F. V., de Souza, L. P., Martins, T. M. M., Lopes, J. H., Mattos, B. D., Mariano, M., Pinheiro, I. F., Valverde, T. M., Livi, S., Camilli, J. Â., et al. (2019) · Nanoscale · doi:10.1039/c9nr05383b · Cited by 128
3D Printing is a Transformative Technology in Congenital Heart Disease
Anwar, S., Singh, G. K., Miller, J. R., Sharma, M., Manning, P. B., Billadello, J. J., Eghtesady, P., & Woodard, P. K. (2018) · JACC Basic to Translational Science · doi:10.1016/j.jacbts.2017.10.003 · Cited by 134
“Bioprinting has been applied to print anatomically shaped cartilage structures (112), skin (113,114), implants for bone growth (115), and even a 3D printed “bionic ear” (116).”
BackgroundBacterial cellulose as a potential biopolymer in biomedical applications: a state-of-the-art review
Shrivastav, P., Pramanik, S., Vaidya, G., Abdelgawad, M. A., Ghoneim, M. M., SINGH, A. K., Abualsoud, B. M., Amaral, L. S., & Abourehab, M. A. S. (2022) · Journal of Materials Chemistry B · doi:10.1039/d1tb02709c · Cited by 121
Advanced Functional Materials Based on Nanocellulose for Pharmaceutical/Medical Applications
Nicu, R., Ciolacu, F., & Ciolacu, D. E. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13081125 · Cited by 118
“However, in order to be suitable for 3D bioprinting, the hydrogel viscosity must be high enough for the hydrogel to retain its shape during printing, and also, the hydrogel must allow crosslinking to be retained in the 3D structure after printing [171].”
Background4D bioprinting of programmed dynamic tissues
Lai, J., Liu, Y., Lü, G., Yung, P. S., Wang, X., Tuan, R. S., & Li, Z. A. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.03.033 · Cited by 170
“MEB is able to process a variety of materials with a wide viscosity range of 1 to > 10 7 mPa s [56,57].”
BackgroundBioprinting of 3D tissues/organs combined with microfluidics
Ma, J., Wang, Y., & Liu, J. (2018) · RSC Advances · doi:10.1039/c8ra03022g · Cited by 113
Wei, L., Wu, S., Kuss, M., Jiang, X., Sun, R., Reid, P., Qin, X., & Duan, B. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.09.001 · Cited by 113
Engineering Hydrogels for the Development of Three-Dimensional In Vitro Models
Maji, S., & Lee, H. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23052662 · Cited by 122
Parupelli, S. K., & Desai, S. S. (2019) · American Journal of Applied Sciences · doi:10.3844/ajassp.2019.244.272 · Cited by 127
The use of bacterial polysaccharides in bioprinting
McCarthy, R. R., Ullah, M. W., Booth, P., Pei, E., & Yang, G. (2019) · Biotechnology Advances · doi:10.1016/j.biotechadv.2019.107448 · Cited by 116
Optimization of 3D bioprinting of periodontal ligament cells
Raveendran, N. T., Vaquette, C., Meinert, C., Ipe, D. S., & Ivanovski, S. (2019) · Dental Materials · doi:10.1016/j.dental.2019.08.114 · Cited by 116
3D Printing of Silk Particle-Reinforced Chitosan Hydrogel Structures and Their Properties
Zhang, J., Allardyce, B. J., Rajkhowa, R., Zhao, Y., Dilley, R. J., Redmond, S. L., Wang, X., & Liu, X. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00804 · Cited by 110
Solvent-based Extrusion 3D Printing for the Fabrication of Tissue Engineering Scaffolds
Zhang, B., Cristescu, R., Chrisey, D. B., & Narayan, R. J. (2020) · International Journal of Bioprinting · doi:10.18063/ijb.v6i1.211 · Cited by 118
Three-Dimensional Bioprinting and Its Potential in the Field of Articular Cartilage Regeneration
Mouser, V. H. M., Levato, R., Bonassar, L. J., DʼLima, D. D., Grande, D. A., Klein, T. J., Saris, D. B. F., Zenobi‐Wong, M., Gawlitta, D., & Malda, J. (2016) · Cartilage · doi:10.1177/1947603516665445 · Cited by 119
Costantini, M., Colosi, C., Święszkowski, W., & Barbetta, A. (2018) · Biofabrication · doi:10.1088/1758-5090/aae605 · Cited by 121
Bioprintable tough hydrogels for tissue engineering applications
Dorishetty, P., Dutta, N. K., & Choudhury, N. R. (2020) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2020.102163 · Cited by 117
3D printing of shape-morphing and antibacterial anisotropic nanocellulose hydrogels
Fourmann, O., Hausmann, M. K., Neels, A., Schubert, M., Nyström, G., Zimmermann, T., & Siqueira, G. D. F. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117716 · Cited by 115
“2 reinforcement, it enables the introduction of properties varying with orientations and at different length scales (Hausmann et al., 2020; Markstedt et al., 2015; Müller, Öztürk, Arlov, Gatenholm, & Zenobi-Wong, 2017; Sydney Gladman, Matsumoto, Nuzzo, Mahadevan, & Lewis, 2016).”
BackgroundDíaz‐Payno, P. J., Kalogeropoulou, M., Muntz, I., Kingma, E., Kops, N., D’Este, M., Koenderink, G. H., Fratila-Apachitei, L. E., van Osch, G. J. V. M., & ZADPOOR, A. A. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202201891 · Cited by 118
Hydrogels for Liver Tissue Engineering
Ye, S., Boeter, J. W. B., Penning, L. C., Spee, B., & Schneeberger, K. (2019) · Bioengineering · doi:10.3390/bioengineering6030059 · Cited by 112
3D Printing Polymers with Supramolecular Functionality for Biological Applications
Pekkanen, A. M., Mondschein, R. J., Williams, C. B., & Long, T. E. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00671 · Cited by 118
3D Printing in Personalized Drug Delivery
Afsana, Jain, V. K., Haider, N., & Jain, K. (2019) · Current Pharmaceutical Design · doi:10.2174/1381612825666190215122208 · Cited by 131
Personalized development of human organs using 3D printing technology
Radenković, D., Solouk, A., & Seifalian, A. M. (2015) · Medical Hypotheses · doi:10.1016/j.mehy.2015.12.017 · Cited by 111
Cellulose–Silver Composites Materials: Preparation and Applications
Salama, A., ABOUZEID, R. E., Owda, M. E., Maya, I. C., & Guarino, V. (2021) · Biomolecules · doi:10.3390/biom11111684 · Cited by 111
Functional acellular matrix for tissue repair
Wang, B., Qinglai, T., Yang, Q., Li, M., Zeng, S., Yang, X., Xiao, Z., Tong, X., Lei, L., & Li, S. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2022.100530 · Cited by 126
Bio-Based Polymers for 3D Printing of Bioscaffolds
Yang, E., Miao, S., Zhong, J., Zhang, Z., Mills, D. K., & Zhang, L. G. (2018) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2018.1484761 · Cited by 115
Ahlfeld, T., Cubo-Mateo, N., Cometta, S., Guduric, V., Vater, C., Bernhardt, A., Akkineni, A. R., Lode, A., & Gelinsky, M. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c00710 · Cited by 106
Polysaccharide-Based Bioink Formulation for 3D Bioprinting of an In Vitro Model of the Human Dermis
Zidarič, T., Milojević, M., Gradišnik, L., Stana Kleinschek, K., Maver, U., & Maver, T. (2020) · Nanomaterials · doi:10.3390/nano10040733 · Cited by 105
Mittal, N., Tien, S., Lizundia, E., & Niederberger, M. (2022) · Small · doi:10.1002/smll.202107183 · Cited by 111
Biomaterials for extrusion-based bioprinting and biomedical applications
Rossi, A., Pescara, T., Gambelli, A. M., Gaggia, F., Asthana, A., Perrier, Q., Basta, G., Moretti, M., Senin, N., Rossi, F., et al. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1393641 · Cited by 119
Liu, P., Shen, H., Zhi, Y., Si, J., Shi, J., Guo, L., & Shen, S. G. (2019) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2019.06.069 · Cited by 107
Composite Hydrogels in Three-Dimensional in vitro Models
Zhao, Z., Vizetto‐Duarte, C., Moay, Z. K., Setyawati, M. I., Rakshit, M., Kathawala, M. H., & Ng, K. W. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.00611 · Cited by 117
Advances in Bioprinting Technologies for Craniofacial Reconstruction
Visscher, D. O., Farré-Guasch, E., Helder, M. N., Gibbs, S., Forouzanfar, T., van Zuijlen, P. P. M., & Wolff, J. (2016) · Trends in biotechnology · doi:10.1016/j.tibtech.2016.04.001 · Cited by 114
Fast Setting Silk Fibroin Bioink for Bioprinting of Patient‐Specific Memory‐Shape Implants
Costa, J. B., Silva‐Correia, J., Oliveira, J. M., & Reis, R. L. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201701021 · Cited by 105
Low Solids Emulsion Gels Based on Nanocellulose for 3D-Printing
Huan, S., Ajdary, R., Bai, L., Klar, V., & Rojas, O. J. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01224 · Cited by 111
Recent Strategies in Extrusion-Based Three-Dimensional Cell Printing toward Organ Biofabrication
Gao, G., Kim, B. S., Jang, J., & Cho, D. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00691 · Cited by 115
Flégeau, K., Puiggalí‐Jou, A., & Zenobi‐Wong, M. (2022) · Biofabrication · doi:10.1088/1758-5090/ac6b58 · Cited by 112
“In large 3D printed scaffolds, these hindrances often result in heterogenous tissue development [15], triggering mechanical failure and sample shrinkage following in vivo implantation.”
BackgroundCell-Laden Nanocomposite Bioinks for 3D Bioprinting
Cai, Y., Chang, S. Y., Gan, S. W., Ma, S., Lu, W. F., & Yen, C. C. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.08.014 · Cited by 116
Liao, J., Wang, B., Huang, Y., Qu, Y., Peng, J., & Qian, Z. (2017) · ACS Omega · doi:10.1021/acsomega.6b00495 · Cited by 107
Benselfelt, T., Engström, J., & Wågberg, L. (2018) · Green Chemistry · doi:10.1039/c8gc00590g · Cited by 107
Al‐Sabah, A., Burnell, S. E. A., Simões, I. N., Jessop, Z. M., Badiei, N., Blain, E. J., & Whitaker, I. S. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.02.057 · Cited by 107
Petta, D., Grijpma, D. W., Alini, M., Eglin, D., & D’Este, M. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00416 · Cited by 109
Engineered 3D Polymer and Hydrogel Microenvironments for Cell Culture Applications
Fan, D., Staufer, U., & Accardo, A. (2019) · Bioengineering · doi:10.3390/bioengineering6040113 · Cited by 113
Padzil, F. N. M., Lee, S. H., Ainun, Z. M. A., Lee, C. H., & Abdullah, L. C. (2020) · Materials · doi:10.3390/ma13051245 · Cited by 122
Nanocellulosic materials as bioinks for 3D bioprinting
Piras, C. C., Fernández‐Prieto, S., & Borggraeve, W. M. D. (2017) · Biomaterials Science · doi:10.1039/c7bm00510e · Cited by 110
Injectable hydrogels: a new paradigm for osteochondral tissue engineering
Singh, Y. P., Moses, J. C., Bhardwaj, N., & Mandal, B. B. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb01430b · Cited by 107
Haring, A. P., Thompson, E. G., Tong, Y., Laheri, S., Cesewski, E., Sontheimer, H., & Johnson, B. N. (2019) · Biofabrication · doi:10.1088/1758-5090/ab02c9 · Cited by 99
Khan, S., Ul‐Islam, M., Ullah, M. W., Zhu, Y., Narayanan, K. B., Han, S. S., & Park, J. K. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.03.191 · Cited by 107
Ananth, K. P., & Jayram, N. D. (2023) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2023.100141 · Cited by 114
Liang, X., Wang, X., Xu, Q., Lu, Y., Zhang, Y., Xia, H., Lu, A., & Zhang, L. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b01456 · Cited by 104
Ahlfeld, T., Doberenz, F., Kilian, D., Vater, C., Korn, P., Lauer, G., Lode, A., & Gelinsky, M. (2018) · Biofabrication · doi:10.1088/1758-5090/aad36d · Cited by 107
Three-dimensional Bioprinting for Bone and Cartilage Restoration in Orthopaedic Surgery
Dhawan, A., Kennedy, P., Rizk, E., & Ozbolat, I. T. (2018) · Journal of the American Academy of Orthopaedic Surgeons · doi:10.5435/jaaos-d-17-00632 · Cited by 110
Polysaccharide hydrogel based 3D printed tumor models for chemotherapeutic drug screening
Gebeyehu, A., Surapaneni, S. K., Huang, J., Mondal, A., Wang, V. Z., Haruna, N. F., Bagde, A., Arthur, P., Kutlehria, S., Patel, N., et al. (2021) · Scientific Reports · doi:10.1038/s41598-020-79325-8 · Cited by 94
Roseti, L., Cavallo, C., Desando, G., Parisi, V., Petretta, M., Bartolotti, I., & Grigolo, B. (2018) · Materials · doi:10.3390/ma11091749 · Cited by 107
Rashad, A., Mohamed-Ahmed, S., Ojansivu, M., Berstad, K., Yassin, M. A., Kivijärvi, T., Heggset, E. B., Syverud, K., & Mustafa, K. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01194 · Cited by 100
3D printed cellulose nanocrystal composites through digital light processing
Li, V. C.-F., Kuang, X., Mulyadi, A., Hamel, C. M., Deng, Y., & Qi, H. J. (2019) · Cellulose · doi:10.1007/s10570-019-02353-9 · Cited by 109
“3D printing is a growing technology that is revolutionizing the field of manufacturing, and is already making an impact in industrial sectors such as aerospace, automotive, architecture, electronics, food production, and tissue engineering (Bikas et al. 2016; de Leon et al. 2016; Esmaeilian et al. 2016; Henke and Trem…”
BackgroundAdvances in bioprinted cell-laden hydrogels for skin tissue engineering
Pereira, R. F., Sousa, A., Barrias, C. C., Bayat, A., Granja, P. L., & Bártolo, P. (2017) · Biomanufacturing Reviews · doi:10.1007/s40898-017-0003-8 · Cited by 106
Complex‐Shaped Cellulose Composites Made by Wet Densification of 3D Printed Scaffolds
Hausmann, M. K., Siqueira, G. D. F., Libanori, R., Kokkinis, D., Neels, A., Zimmermann, T., & Studart, A. R. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904127 · Cited by 111
Grafting of 3D Bioprinting to In Vitro Drug Screening: A Review
Nie, J., Gao, Q., Fu, J., & He, Y. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901773 · Cited by 106
Pushing the rheological and mechanical boundaries of extrusion-based 3D bioprinting
Ouyang, L. (2022) · Trends in biotechnology · doi:10.1016/j.tibtech.2022.01.001 · Cited by 107
Sharma, R., Malviya, R., Singh, S. K., & Prajapati, B. G. (2023) · Gels · doi:10.3390/gels9050430 · Cited by 110
“The high-precision printing of complex 3D structural scaffolds that resist degradation for up to 30 days [177,178] is made feasible by combining CNFs with sodium alginate. combining CNFs with sodium alginate.”
MethodEnhancement of the Mechanical Properties of Hydrogels with Continuous Fibrous Reinforcement
Beckett, L. E., Lewis, J. T., Tonge, T. K., & Korley, L. T. J. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c00911 · Cited by 106
3D Printing for Hip Implant Applications: A Review
Okolie, O., Stachurek, I., Kandasubramanian, B., & Njuguna, J. (2020) · Polymers · doi:10.3390/polym12112682 · Cited by 99
Yuan, J., Yi, C., Jiang, H., Liu, F., & Cheng, G. J. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01002 · Cited by 99
Application of Alginate Hydrogels for Next-Generation Articular Cartilage Regeneration
Liu, W., Madry, H., & Cucchiarini, M. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23031147 · Cited by 99
Printing of Three-Dimensional Tissue Analogs for Regenerative Medicine
Lee, V. K., & Dai, G. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1613-7 · Cited by 97
Micro and nanotechnologies for bone regeneration: Recent advances and emerging designs
Mohammadi, M., Shaegh, S. A. M., Alibolandi, M., Ebrahimzadeh, M. A., Tamayol, A., Jaafari, M. R., & Ramezani, M. (2018) · Journal of Controlled Release · doi:10.1016/j.jconrel.2018.01.032 · Cited by 104
“The advent of recent technologies and most critically, 3D printing is expected to revolutionize the field of tissue engineering by allowing the design and development of new generation of scaffolds [201].”
BackgroundMurphy, C. A., Costa, J. B., Silva‐Correia, J., Oliveira, J. M., Reis, R. L., & Collins, M. N. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2018.04.002 · Cited by 100
3D Bioprinting of Hydrogels for Cartilage Tissue Engineering
Huang, J., Xiong, J., Wang, D., Zhang, J., Yang, L., Sun, S., & Liang, Y. (2021) · Gels · doi:10.3390/gels7030144 · Cited by 109
Henriksson, I., Gatenholm, P., & Hägg, D. A. (2017) · Biofabrication · doi:10.1088/1758-5090/aa5c1c · Cited by 98
“The width of the fibrils was around 20 nm, which is in line with what we have shown previously (Markstedt et al 2015).”
MethodResultSelf-citationEmulsion Inks for 3D Printing of High Porosity Materials
Sears, N. A., Dhavalikar, P., & Cosgriff‐Hernandez, E. (2016) · Macromolecular Rapid Communications · doi:10.1002/marc.201600236 · Cited by 97
O’Connell, C. D., Onofrillo, C., Duchi, S., Li, X., Zhang, Y., Tian, P., Lu, L., Trengove, A., Quigley, A. F., Gambhir, S., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab0b7c · Cited by 101
“34 Alternatively, a drop of water can be added to each tube to hydrate lyophlized hydrogels.”
BackgroundRheology of cellulose nanocrystal and nanofibril suspensions
Xu, J., Wang, P., Yuan, B., & Zhang, H. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121527 · Cited by 99
3D printed alginate-cellulose nanofibers based patches for local curcumin administration
Olmos‐Juste, R., Alonso-Lerma, B., Pérez‐Jiménez, R., Gabilondo, N., & Eceiza, A. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118026 · Cited by 102
Patient-specific meniscus prototype based on 3D bioprinting of human cell-laden scaffold
Filardo, G., Petretta, M., Cavallo, C., Roseti, L., Durante, S., Albisinni, U., & Grigolo, B. (2019) · Bone and Joint Research · doi:10.1302/2046-3758.82.bjr-2018-0134.r1 · Cited by 95
Chinta, M. L., Velidandi, A., Pabbathi, N. P. P., Dahariya, S., & Parcha, S. R. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.01.196 · Cited by 98
Surface Engineered Biomimetic Inks Based on UV Cross-Linkable Wood Biopolymers for 3D Printing
Xu, W., Zhang, X., Yang, P., Långvik, O., Wang, X., Zhang, Y., Cheng, F., Österberg, M., Willför, S. M., & Xu, C. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b03442 · Cited by 95
3D Printing for the Clinic: Examining Contemporary Polymeric Biomaterials and Their Clinical Utility
Weems, A. C., Pérez-Madrigal, M. M., Arno, M. C., & Dove, A. P. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.9b01539 · Cited by 87
Wang, J., Liu, Y., Zhang, X., Rahman, S. E., Su, S., Wei, J., Ning, F., Hu, Z., Martínez–Zaguilán, R., Sennoune, S. R., et al. (2020) · Polymer · doi:10.1016/j.polymer.2020.123238 · Cited by 99
Ghanbari, M., Salavati‐Niasari, M., & Mohandes, F. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.120660 · Cited by 98
Bakkari, M. E., Bindiganavile, V., Goncalves, J., & Boluk, Y. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.036 · Cited by 99
Maiz–Fernández, S., Barroso, N., Pérez‐Álvarez, L., Silván, U., Vilas‐Vilela, J. L., & Lanceros-Méndez, S. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.08.022 · Cited by 96
A review on biomaterials for ovarian tissue engineering
Dadashzadeh, A., Moghassemi, S., Shavandi, A., & Amorim, C. A. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.08.026 · Cited by 99
Shi, Y., Jiao, H., Sun, J., Lu, X., Yu, S., Lü, C., Wang, Q., Liu, H., Biranje, S. S., Wang, J., et al. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119208 · Cited by 98
Conductive Cellulose Composites with Low Percolation Threshold for 3D Printed Electronics
Park, J. S., Kim, T., & Kim, W. S. (2017) · Scientific Reports · doi:10.1038/s41598-017-03365-w · Cited by 92
Polymers in Cartilage Defect Repair of the Knee: Current Status and Future Prospects
Jeuken, R. M., Roth, A. K., Peters, R., van Donkelaar, C. C., Thies, J., van Rhijn, L. W., & Emans, P. J. (2016) · Polymers · doi:10.3390/polym8060219 · Cited by 100
“Recent developments include printing of a wide variety of materials and combinations, such as calcium polyphosphate and PVA, hydroxyapatite and tricalcium phosphate, calcium phosphate with collagen in binder, PCL and chitosan, and even living cells such as bovine and human chondrocytes [165,166].”
BackgroundBioengineering Approaches for Bladder Regeneration
Serrano‐Aroca, Á., Vera-Donoso, C. D., & Moreno‐Manzano, V. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19061796 · Cited by 93
3D printed nanomaterial-based electronic, biomedical, and bioelectronic devices
Hales, S. H., Tokita, E., Neupane, R., Ghosh, U., Elder, B., Wirthlin, D. J., & Kong, Y. L. (2019) · Nanotechnology · doi:10.1088/1361-6528/ab5f29 · Cited by 91
Ali, F., Kalva, S. N., & Koç, M. (2024) · Discover Materials · doi:10.1007/s43939-024-00115-4 · Cited by 104
“Cellulose nanofibrils, used as rheological modifiers, can enhance the rheological properties of hydrogels, enabling them to be more suitable for 3D printing [142–144].”
Biodegradable polymer scaffolds
Hsu, S.-H., Hung, K.-C., & Chen, C.-W. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb02176j · Cited by 87
Biomaterials Based on Marine Resources for 3D Bioprinting Applications
Zhang, Y., Zhou, D., Chen, J., Zhang, X., Li, X., Zhao, W., & Xu, T. (2019) · Marine Drugs · doi:10.3390/md17100555 · Cited by 93
Dynamic Hydrogels and Polymers as Inks for Three-Dimensional Printing
Heidarian, P., Kouzani, A. Z., Kaynak, A., Paulino, M., & Nasri‐Nasrabadi, B. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00047 · Cited by 92
Algal polysaccharides for 3D printing: A review
Mandal, S., Nagi, G. K., Corcoran, A. A., Agrawal, R., Dubey, M. K., & Hunt, R. W. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.120267 · Cited by 95
Gorroñogoitia, I., Urtaza, U., Zubiarrain-Laserna, A., Alonso‐Varona, A., & Zaldua, A. M. (2022) · Polymers · doi:10.3390/polym14020354 · Cited by 94
Nanocellulose: An amazing nanomaterial with diverse applications in food science
Zhang, F., Shen, R., Li, N., Yang, X., & Lin, D. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.120497 · Cited by 92
Mirdamadi, E., Muselimyan, N., Koti, P., Asfour, H., & Sarvazyan, N. A. (2019) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2018.0175 · Cited by 95
Dialdehyde cellulose nanocrystal/gelatin hydrogel optimized for 3D printing applications
Jiang, Y., Zhou, J., Yang, Z., Liu, D., Xv, X., Zhao, G., Shi, H., & Zhang, Q. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2407-0 · Cited by 88
“[22] used CNF as a blending modifier to improve the strength of alginate bio-ink.”
MethodZhu, X., Chen, T., Feng, B., Weng, J., Duan, K., Wang, J., & Lu, X. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00682 · Cited by 90
Advances in three‐dimensional bioprinting of bone: Progress and challenges
Midha, S., Dalela, M., Sybil, D., Patra, P., & Mohanty, S. (2019) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2847 · Cited by 88
“Its application extends to various tissues types including heart valve conduits, cartilage, and neuronal tissues (Duan et al., 2013, 2014; Kesti et al., 2015; Lozano et al., 2015; Markstedt et al., 2015).”
Background
Metadata
- Authors
- Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P.
- Affiliations
- Wallenberg Wood Science Center (SE)
- Wallenberg Wood Science Center and ‡Biopolymer Technology, Department of Chemical and Biological Engineering, Chalmers University of Technology, Gothenburg 412 96, Sweden
- Corresponding author
- Gatenholm, Paul
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-04-07
- Volume
- 16
- Issue
- 5
- Pages
- 1489-1496
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1994903148
- Cited by
- 1,528
- References
- 39
- Citations by year
- 2026: 64 · 2025: 90 · 2024: 116 · 2023: 151 · 2022: 198 · 2021: 204 · 2020: 198 · 2019: 177 · 2018: 147 · 2017: 99 · 2016: 73 · 2015: 9
- FWCI
- 54.39
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Chalmers Research (Chalmers University of Technology) (submittedVersion)
- Funders
- European Commission
- VINNOVA
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Surgery › Tissue Engineering and Regenerative Medicine
- Keywords
- 3D bioprinting, human chondrocytes, cartilage tissue engineering, nanocellulose, alginate, bioinks, cellulose nanofibers, shear thinning, hydrogels, meniscus, auricular cartilage, cell viability, shape fidelity
- MeSH terms
- Alginates, Animals, Cartilage, Cellulose, Hexuronic Acids, Humans, Chondrocytes, Hydrogel, Polyethylene Glycol Dimethacrylate, Glucuronic Acid, Tissue Engineering, Regenerative Medicine, Tissue Scaffolds, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.