The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Degradation Mechanisms at the Li10GeP2S12/LiCoO2 Cathode Interface in an All-Solid-State Lithium-Ion Battery
Abstract
All-solid-state batteries (ASSBs) show great potential for providing high power and energy densities with enhanced battery safety. While new solid electrolytes (SEs) have been developed with high enough ionic conductivities, SSBs with long operational life are still rarely reported. Therefore, on the way to high-performance and long-life ASSBs, a better understanding of the complex degradation mechanisms, occurring at the electrode/electrolyte interfaces is pivotal. While the lithium metal/solid electrolyte interface is receiving considerable attention due to the quest for high energy density, the interface between the active material and solid electrolyte particles within the composite cathode is arguably the most difficult to solve and study. In this work, multiple characterization methods are combined to better understand the processes that occur at the LiCoO 2 cathode and the Li 10 GeP 2 S 12 solid electrolyte interface. Indium and Li 4 Ti 5 O 12 are used as anode materials to avoid the instability problems associated with Li-metal anodes. Capacity fading and increased impedances are observed during long-term cycling. Postmortem analysis with scanning transmission electron microscopy, electron energy loss spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy show that electrochemically driven mechanical failure and degradation at the cathode/solid electrolyte interface contribute to the increase in internal resistance and the resulting capacity fading. These results suggest that the development of electrochemically more stable SEs and the engineering of cathode/SE interfaces are crucial for achieving reliable SSB performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Self-citationLixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
High-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Zhu, Y., He, X., & Mo, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07517 · Cited by 1,936
Electrochemical and In Situ X‐Ray Diffraction Studies of Lithium Intercalation in Li x CoO2
Reimers, J. N., & Dahn, J. R. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2221184 · Cited by 1,723
Interface Stability in Solid-State Batteries
Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C., & Ceder, G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04082 · Cited by 1,652
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Electrochemical Stability of Li10GeP2S12 and Li7La3Zr2O12 Solid Electrolytes
Han, F., Zhu, Y., He, X., Mo, Y., & Wang, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501590 · Cited by 1,095
Zhu, Y., He, X., & Mo, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08574h · Cited by 1,045
Koerver, R., Aygün, I., Leichtweiß, T., Dietrich, C., Zhang, W., Binder, J. O., Hartmann, P., Zeier, W. G., & Janek, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00931 · Cited by 1,020
Self-citationOhta, N., Takada, K., Zhang, L., Ma, R., Osada, M., & Sasaki, T. (2006) · Advanced Materials · doi:10.1002/adma.200502604 · Cited by 899
Wenzel, S., Randau, S., Leichtweiß, T., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00610 · Cited by 854
Self-citationWang, H., Jang, Y., Huang, B., Sadoway, D. R., & Chiang, Y. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391631 · Cited by 682
Sakuda, A., Hayashi, A., & Tatsumisago, M. (2010) · Chemistry of Materials · doi:10.1021/cm901819c · Cited by 651
Molecular Spectroscopy by Means of ESCA III.Carbon compounds
Gelius, U., Hedén, P. F., Hedman, J., Lindberg, B. J., Manne, R., Nordberg, R., Nordling, C., & Siegbahn, K. (1970) · Physica Scripta · doi:10.1088/0031-8949/2/1-2/014 · Cited by 609
Zhang, W., Weber, D. A., Weigand, H., Arlt, T., Manke, I., Schröder, D., Koerver, R., Leichtweiss, T., Hartmann, P., Zeier, W. G., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01137 · Cited by 538
Self-citationHartmann, P., Leichtweiss, T., Busche, M. R., Schneider, M., Reich, M., Sann, J., Adelhelm, P., & Janek, J. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4051275 · Cited by 523
Self-citationIntergranular Cracking as a Major Cause of Long-Term Capacity Fading of Layered Cathodes
Liu, H., Wolfman, M., Karki, K., Yu, Y., Stach, E. A., Cabana, J., Chapman, K. W., & Chupas, P. J. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00379 · Cited by 517
Wenzel, S., Weber, D. A., Leichtweiß, T., Busche, M. R., Sann, J., & Janek, J. (2015) · Solid State Ionics · doi:10.1016/j.ssi.2015.11.034 · Cited by 505
Self-citationDendrite-Free Li-Metal Battery Enabled by a Thin Asymmetric Solid Electrolyte with Engineered Layers
Duan, H., Yin, Y.-X., Shi, Y., Wang, P.-F., Zhang, X.-D., Yang, C.-P., Shi, J.-L., Wen, R., Guo, Y.-G., & Wan, L.-J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10864 · Cited by 482
Hu, Y.-S. (2016) · Nature Energy · doi:10.1038/nenergy.2016.42 · Cited by 440
The Detrimental Effects of Carbon Additives in Li10GeP2S12-Based Solid-State Batteries
Zhang, W., Leichtweiß, T., Culver, S. P., Koerver, R., Das, D., Weber, D. A., Zeier, W. G., & Janek, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11530 · Cited by 392
Self-citationRedox activity of argyrodite Li6PS5Cl electrolyte in all-solid-state Li-ion battery: An XPS study
Auvergniot, J., Cassel, A., Foix, D., Viallet, V., Seznec, V., & Dedryvère, R. (2017) · Solid State Ionics · doi:10.1016/j.ssi.2016.11.029 · Cited by 367
Zhang, W., Schröder, D., Arlt, T., Manke, I., Koerver, R., Pinedo, R., Weber, D. A., Sann, J., Zeier, W. G., & Janek, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02730c · Cited by 348
Self-citationImpact of Cathode Material Particle Size on the Capacity of Bulk-Type All-Solid-State Batteries
Strauss, F., Bartsch, T., de Biasi, L., Kim, A.-Y., Janek, J., Hartmann, P., & Brezesinski, T. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b00275 · Cited by 334
Self-citationRedox-active cathode interphases in solid-state batteries
Koerver, R., Walther, F., Aygün, I., Sann, J., Dietrich, C., Zeier, W. G., & Janek, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta07641j · Cited by 287
Self-citationOh, G., Hirayama, M., Kwon, O., Suzuki, K., & Kanno, R. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04940 · Cited by 278
Structural Insights and 3D Diffusion Pathways within the Lithium Superionic Conductor Li10GeP2S12
Weber, D. A., Senyshyn, A., Weldert, K. S., Wenzel, S., Zhang, W., Kaiser, R., Berendts, S., Janek, J., & Zeier, W. G. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02424 · Cited by 215
Self-citationHakari, T., Deguchi, M., Mitsuhara, K., Ohta, T., Saito, K., Orikasa, Y., Uchimoto, Y., Kowada, Y., Hayashi, A., & Tatsumisago, M. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00551 · Cited by 205
Reaction Heterogeneity in LiNi0.8Co0.15Al0.05O2 Induced by Surface Layer
Grenier, A., Liu, H., Wiaderek, K. M., Lebens-Higgins, Z. W., Borkiewicz, O. J., Piper, L. F. J., Chupas, P. J., & Chapman, K. W. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02236 · Cited by 190
Gong, Y., Zhang, J., Jiang, L., Shi, J.-A., Zhang, Q., Yang, Z., Zou, D., Wang, J., Yu, X., Xiao, R., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b13344 · Cited by 186
Effect of Compressive Stress on Electrochemical Performance of Silicon Anodes
Piper, D. M., Yersak, T. A., & Lee, S.-H. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.064301jes · Cited by 184
Gas Evolution in Operating Lithium-Ion Batteries Studied In Situ by Neutron Imaging
Michalak, B., Sommer, H., Mannes, D., Kaestner, A., Brezesinski, T., & Janek, J. (2015) · Scientific Reports · doi:10.1038/srep15627 · Cited by 161
Self-citationSolid-state lithium battery with graphite anode
Takada, K., Inada, T., Kajiyama, A., Sasaki, H., Kondo, S., Watanabe, M., Murayama, M., & Kanno, R. (2003) · Solid State Ionics · doi:10.1016/s0167-2738(02)00823-8 · Cited by 150
Dietrich, C., Weber, D. A., Culver, S. P., Senyshyn, A., Sedlmaier, S. J., Indris, S., Janek, J., & Zeier, W. G. (2017) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.7b00751 · Cited by 141
Self-citationMichalak, B., Berkes, B. B., Sommer, H., Bergfeldt, T., Brezesinski, T., & Janek, J. (2016) · Analytical Chemistry · doi:10.1021/acs.analchem.5b04696 · Cited by 123
Self-citationRadin, M. D., Alvarado, J., Meng, Y. S., & der Ven, A. V. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b03989 · Cited by 97
Lithiation-Derived Repellent toward Lithium Anode Safeguard in Quasi-solid Batteries
Zeng, X., Yin, Y., Shi, Y., Zhang, X., Yao, H., Wen, R., Wu, X., & Guo, Y. (2018) · Chem · doi:10.1016/j.chempr.2017.12.003 · Cited by 75
Dokko, K., Horikoshi, S., Itoh, T., et al. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00456-0 · Cited by 70
Cited by
Fundamentals of inorganic solid-state electrolytes for batteries
Famprikis, T., Canepa, P., Dawson, J. A., Islam, M. S., & Masquelier, C. (2019) · Nature Materials · doi:10.1038/s41563-019-0431-3 · Cited by 2,525
Interfaces and Interphases in All-Solid-State Batteries with Inorganic Solid Electrolytes
Banerjee, A., Wang, X., Fang, C., Wu, E. A., & Meng, Y. S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00101 · Cited by 1,526
Understanding interface stability in solid-state batteries
Xiao, Y., Wang, Y., Bo, S.-H., Kim, J. C., Miara, L. J., & Ceder, G. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0157-5 · Cited by 1,219
Garnet-Type Solid-State Electrolytes: Materials, Interfaces, and Batteries
Wang, C., Fu, K., Kammampata, S. P., McOwen, D. W., Samson, A. J., Zhang, L., Hitz, G. T., Nolan, A. M., Wachsman, E. D., Mo, Y., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00427 · Cited by 1,212
Electrochemical Impedance Spectroscopy of Metal Oxide Electrodes for Energy Applications
Bredar, A. R. C., Chown, A. L., Burton, A. R., & Farnum, B. H. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01965 · Cited by 1,035
Metadata
- Authors
- Zhang, W., Richter, F. H., Culver, S. P., Leichtweiss, T., Lozano, J. G., Dietrich, C., Bruce, P. G., Zeier, W. G., & Janek, J.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-06-07
- Volume
- 10
- Issue
- 26
- Pages
- 22226-22236
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2805398344
- Cited by
- 334
- References
- 41
- FWCI
- 12.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.