The DOI matches its Crossref record; 75 of the 75 references it cites were found in a registry or an index.
3D-Bioprinting of Polylactic Acid (PLA) Nanofiber–Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells
Abstract
Bioinks play a central role in 3D-bioprinting by providing the supporting environment within which encapsulated cells can endure the stresses encountered during the digitally driven fabrication process and continue to mature, proliferate, and eventually form extracellular matrix (ECM). In order to be most effective, it is important that bioprinted constructs recapitulate the native tissue milieu as closely as possible. As such, musculoskeletal soft tissue constructs can benefit from bioinks that mimic their nanofibrous matrix constitution, which is also critical to their function. This study focuses on the development and proof-of-concept assessment of a fibrous bioink composed of alginate hydrogel, polylactic acid nanofibers, and human adipose-derived stem cells (hASC) for bioprinting such tissue constructs. First, hASC proliferation and viability were assessed in 3D-bioplotted strands over 16 days in vitro. Then, a human medial knee meniscus digitally modeled using magnetic resonance images was bioprinted and evaluated over 8 weeks in vitro . Results show that the nanofiber-reinforced bioink allowed higher levels of cell proliferation within bioprinted strands, with a peak at day 7, while still maintaining a vast majority of viable cells at day 16. The cell metabolic activity on day 7 was 28.5% higher in this bioink compared to the bioink without nanofibers. Histology of the bioprinted meniscus at both 4 and 8 weeks showed 54% and 147% higher cell density, respectively, in external versus internal regions of the construct. The presence of collagen and proteoglycans was also noted in areas surrounding the hASC, indicating ECM secretion and chondrogenic differentiation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Human Adipose Tissue Is a Source of Multipotent Stem Cells
Zuk, P. A., Zhu, M., Ashjian, P., De Ugarte, D. A., Huang, J. I., Mizuno, H., Alfonso, Z. C., Fraser, J. K., Benhaim, P., & Hedrick, M. H. (2002) · Molecular Biology of the Cell · doi:10.1091/mbc.e02-02-0105 · Cited by 6,664
Tissue Cells Feel and Respond to the Stiffness of Their Substrate
Discher, D. E., Janmey, P., & Wang, Y.-L. (2005) · Science · doi:10.1126/science.1116995 · Cited by 6,382
Crystalline Ropes of Metallic Carbon Nanotubes
Thess, A., Lee, R., Nikolaev, P., Dai, H., Petit, P., Robert, J., Xu, C., Lee, Y. H., Kim, S. G., Rinzler, A. G., et al. (1996) · Science · doi:10.1126/science.273.5274.483 · Cited by 5,580
Cell locomotion and focal adhesions are regulated by substrate flexibility
Pelham, R. J., & Wang, Y.-L. (1997) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.94.25.13661 · Cited by 3,027
Alginate hydrogels as synthetic extracellular matrix materials
Rowley, J. A., Madlambayan, G., & Mooney, D. J. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00107-0 · Cited by 2,342
Hematoxylin and Eosin Staining of Tissue and Cell Sections
Fischer, A. H., Jacobson, K. A., Rose, J., & Zeller, R. (2008) · Cold Spring Harbor Protocols · doi:10.1101/pdb.prot4986 · Cited by 2,128
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Alginate-Based Biomaterials for Regenerative Medicine Applications
Sun, J., & Tan, H. (2013) · Materials · doi:10.3390/ma6041285 · Cited by 1,361
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
Peister, A., Mellad, J. A., Larson, B. L., Hall, B. M., Gibson, L. F., & Prockop, D. J. (2004) · Blood · doi:10.1182/blood-2003-09-3070 · Cited by 994
Mauck, R. L., Soltz, M. A., Wang, C. C. B., Wong, D. D., Chao, P.-H. G., Valhmu, W. B., Hung, C. T., & Ateshian, G. A. (2000) · Journal of Biomechanical Engineering · doi:10.1115/1.429656 · Cited by 976
Veiseh, O., Doloff, J. C., Ma, M., Vegas, A. J., Tam, H. H., Bader, A. R., Li, J., Langan, E., Wyckoff, J., Loo, W. S., et al. (2015) · Nature Materials · doi:10.1038/nmat4290 · Cited by 897
Mathew, A. P., Oksman, K., & Sain, M. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21779 · Cited by 851
Awad, H. A., Quinn Wickham, M., Leddy, H. A., Gimble, J. M., & Guilak, F. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.045 · Cited by 794
Manufacturing process of cellulose whiskers/polylactic acid nanocomposites
Oksman, K., Mathew, A. P., Bondeson, D., & Kvien, I. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.03.002 · Cited by 783
The Design of Scaffolds for Use in Tissue Engineering. Part II. Rapid Prototyping Techniques
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2002) · Tissue Engineering · doi:10.1089/107632702753503009 · Cited by 729
Lee, C. H., Shin, H. J., Cho, I. H., Kang, Y.-M., Kim, I. A., Park, K.-D., & Shin, J.-W. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.037 · Cited by 633
Choi, J. S., Lee, S. J., Christ, G. J., Atala, A., & Yoo, J. J. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.03.031 · Cited by 611
Kundu, J., Shim, J.-H., Jang, J., Kim, S.-W., & Cho, D.-W. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1682 · Cited by 552
Cell and organ printing 1: Protein and cell printers
Wilson, W. C., & Boland, T. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10057 · Cited by 531
Lattouf, R., Younes, R., Lutomski, D., Naaman, N., Godeau, G., Senni, K., & Changotade, S. (2014) · Journal of Histochemistry & Cytochemistry · doi:10.1369/0022155414545787 · Cited by 511
Alginate-based microcapsules for immunoisolation of pancreatic islets
de Vos, P., Faas, M. M., Strand, B., & Calafiore, R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.07.010 · Cited by 511
Fedorovich, N. E., Alblas, J., de Wijn, J. R., Hennink, W. E., Verbout, A. J., & Dhert, W. J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0175 · Cited by 467
Single lamellar mechanics of the human lumbar anulus fibrosus
Holzapfel, G. A., Schulze-Bauer, C. A. J., Feigl, G., & Regitnig, P. (2005) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-004-0053-8 · Cited by 467
Bioprinting Technology: A Current State-of-the-Art Review
Dababneh, A. B., & Ozbolat, I. T. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028512 · Cited by 427
Collagenous fibril texture of the human knee joint menisci
Petersen, W., & Tillmann, B. (1998) · Anatomy and Embryology · doi:10.1007/s004290050141 · Cited by 427
Additive fabrication technologies applied to medicine and health care: a review
Giannatsis, J., & Dedoussis, V. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-007-1308-1 · Cited by 389
The effect of nanofiber alignment on the maturation of engineered meniscus constructs
Baker, B. M., & Mauck, R. L. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.01.004 · Cited by 379
Designing alginate hydrogels to maintain viability of immobilized cells
Kong, H. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00295-3 · Cited by 375
GarrettJr., W. E. (2006) · The Journal of Bone and Joint Surgery (American) · doi:10.2106/jbjs.e.01208 · Cited by 333
Review: Bioprinting: A Beginning
Mironov, V., Reis, N., & Derby, B. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.631 · Cited by 319
Ahearne, M., Yang, Y., El Haj, A. J., Then, K. Y., & Liu, K.-K. (2005) · Journal of The Royal Society Interface · doi:10.1098/rsif.2005.0065 · Cited by 313
Preparation of poly(ε-caprolactone)-based tissue engineering scaffolds by stereolithography
Elomaa, L., Teixeira, S., Hakala, R., Korhonen, H., Grijpma, D. W., & Seppälä, J. V. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.039 · Cited by 311
Lin, H., & Yeh, Y. (2004) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30065 · Cited by 303
Evolution of Bioinks and Additive Manufacturing Technologies for 3D Bioprinting
Jose, R. R., Rodriguez, M. J., Dixon, T. A., Omenetto, F., & Kaplan, D. L. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00088 · Cited by 302
Dispersion and characteristics of surfactant modified cellulose whiskers nanocomposites
Bondeson, D., & Oksman, K. (2007) · Composite Interfaces · doi:10.1163/156855407782106519 · Cited by 294
Lynch, H. A., Johannessen, W., Wu, J. P., Jawa, A., & Elliott, D. M. (2003) · Journal of Biomechanical Engineering · doi:10.1115/1.1614819 · Cited by 272
Comparison of Chondrogensis in Static and Perfused Bioreactor Culture
Pazzano, D., Mercier, K. A., Moran, J. M., Fong, S. S., DiBiasio, D. D., Rulfs, J. X., Kohles, S. S., & Bonassar, L. J. (2000) · Biotechnology Progress · doi:10.1021/bp000082v · Cited by 266
Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling
Korpela, J., Kokkari, A., Korhonen, H., Malin, M., Närhi, T., & Seppälä, J. (2013) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.32863 · Cited by 258
Stanton, M. M., Samitier, J., & Sánchez, S. (2015) · Lab on a Chip · doi:10.1039/c5lc90069g · Cited by 252
Mechanics of oriented electrospun nanofibrous scaffolds for annulus fibrosus tissue engineering
Nerurkar, N. L., Elliott, D. M., & Mauck, R. L. (2007) · Journal of Orthopaedic Research · doi:10.1002/jor.20384 · Cited by 233
Extracellular matrix in development of the intervertebral disc
Hayes, A. (2001) · Matrix Biology · doi:10.1016/s0945-053x(01)00125-1 · Cited by 232
Angiogenic and inflammatory response to biodegradable scaffolds in dorsal skinfold chambers of mice
Rücker, M., Laschke, M. W., Junker, D., Carvalho, C., Schramm, A., Mülhaupt, R., Gellrich, N.-C., & Menger, M. D. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.05.033 · Cited by 232
Three-dimensional bioprinting in tissue engineering and regenerative medicine
Gao, G., & Cui, X. (2016) · Biotechnology Letters · doi:10.1007/s10529-015-1975-1 · Cited by 227
Chondrogenic Differentiation of Human Mesenchymal Stem Cells in Three-Dimensional Alginate Gels
Xu, J., Wang, W., Ludeman, M., Cheng, K., Hayami, T., Lotz, J. C., & Kapila, S. (2008) · Tissue Engineering Part A · doi:10.1089/tea.2007.0272 · Cited by 223
Erickson, I. E., Huang, A. H., Chung, C., Li, R. T., Burdick, J. A., & Mauck, R. L. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0099 · Cited by 220
Mauck, R. L., Baker, B. M., Nerurkar, N. L., Burdick, J. A., Li, W.-J., Tuan, R. S., & Elliott, D. M. (2009) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2008.0652 · Cited by 213
Dispersion of soybean stock‐based nanofiber in a plastic matrix
Wang, B., & Sain, M. (2007) · Polymer International · doi:10.1002/pi.2167 · Cited by 208
Erickson, I. E., Huang, A. H., Sengupta, S., Kestle, S., Burdick, J. A., & Mauck, R. L. (2009) · Osteoarthritis and Cartilage · doi:10.1016/j.joca.2009.07.003 · Cited by 186
CHONDROGENIC DIFFERENTIATION OF HUMAN MESENCHYMAL STEM CELLS WITHIN AN ALGINATE LAYER CULTURE SYSTEM
Kavalkovich, K. W., Boynton, R., Murphy, M. J., & Barry, F. (2002) · In Vitro Cellular & Developmental Biology - Animal · doi:10.1290/1071-2690(2002)038<0457:cdohms>2.0.co;2 · Cited by 185
Martínez Ávila, H., Schwarz, S., Feldmann, E.-M., Mantas, A., von Bomhard, A., Gatenholm, P., & Rotter, N. (2014) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-014-5819-z · Cited by 163
Cellular repopulation of deep‐frozen meniscal autografts: An experimental study in the dog
ARNOCZKY, S. P., DiCarlo, E. F., O'Brien, S. J., et al. (1992) · Arthroscopy The Journal of Arthroscopic and Related Surgery · doi:10.1016/0749-8063(92)90003-t · Cited by 152
Novel bilayer bacterial nanocellulose scaffold supports neocartilage formation in vitro and in vivo
Ávila, H. M., Feldmann, E.-M., Pleumeekers, M. M., Nimeskern, L., Kuo, W., de Jong, W. C., Schwarz, S., Müller, R., Hendriks, J., Rotter, N., et al. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.12.025 · Cited by 149
Cardwell, R. D., Dahlgren, L. A., & Goldstein, A. S. (2012) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1589 · Cited by 145
Nanocellulose-alginate hydrogel for cell encapsulation
Park, M., Lee, D., & Hyun, J. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.07.059 · Cited by 138
Pauly, H. M., Kelly, D. J., Popat, K. C., Trujillo, N. A., Dunne, N., McCarthy, H. O., & Donahue, T. L. H. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.03.022 · Cited by 136
Ballyns, J. J., Gleghorn, J. P., Niebrzydowski, V., Rawlinson, J., Potter, H. G., Maher, S. A., Wright, T. M., & Bonassar, L. J. (2008) · Tissue Engineering Part A · doi:10.1089/ten.tea.2007.0186 · Cited by 130
Zenobi‐Wong, M., Siegrist, M., Wang, X., & Hunziker, E. B. (2001) · Journal of Orthopaedic Research® · doi:10.1016/s0736-0266(00)90023-8 · Cited by 84
Williams, G. M., Klein, T. J., & Sah, R. L. (2005) · Acta Biomaterialia · doi:10.1016/j.actbio.2005.07.009 · Cited by 82
Chen, C., Shyu, V. B., Chen, J., & Lee, M. (2014) · Biofabrication · doi:10.1088/1758-5082/6/1/015004 · Cited by 79
Mechanical characterization of bioprinted in vitro soft tissue models
Zhang, T., Yan, K. C., Ouyang, L., & Sun, W. (2013) · Biofabrication · doi:10.1088/1758-5082/5/4/045010 · Cited by 79
Jensen, J., Rölfing, J. D., Le, D. Q. S., Kristiansen, A. A., Nygaard, J. V., Hokland, L. B., Bendtsen, M. M., Kassem, M. S., Lysdahl, H., & Bünger, C. E. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34970 · Cited by 74
Rücker, M., Laschke, M. W., Junker, D., Carvalho, C., Tavassol, F., Mülhaupt, R., Gellrich, N., & Menger, M. D. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31722 · Cited by 68
Improved cartilage repair viain vitropre-maturation of MSC-seeded hyaluronic acid hydrogels
Erickson, I. E., Kestle, S. R., Zellars, K. H., Dodge, G. R., Burdick, J. A., & Mauck, R. L. (2012) · Biomedical Materials · doi:10.1088/1748-6041/7/2/024110 · Cited by 65
Adipose-Derived Stem Cells in Functional Bone Tissue Engineering: Lessons from Bone Mechanobiology
Bodle, J. C., Hanson, A. D., & Loboa, E. G. (2011) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2010.0738 · Cited by 64
Olderøy, M. Ø., Lilledahl, M. B., Beckwith, M. S., Melvik, J. E., Reinholt, F. P., Sikorski, P., & Brinchmann, J. E. (2014) · PLoS ONE · doi:10.1371/journal.pone.0091662 · Cited by 48
Bodle, J. C., Teeter, S. D., Hluck, B. H., Hardin, J. W., Bernacki, S. H., & Loboa, E. G. (2014) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2013.0683 · Cited by 44
Maximizing cartilage formation and integration via a trajectory-based tissue engineering approach
Fisher, M. B., Henning, E. A., Söegaard, N., Dodge, G. R., Steinberg, D. R., & Mauck, R. L. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.11.031 · Cited by 41
Self-citationRahman, T. M., Selden, C., Khalil, M., et al. (2004) · Artificial Organs · doi:10.1111/j.1525-1594.2004.07259.x · Cited by 40
Scaffolding hydrogels for rapid prototyping based tissue engineering
Shirwaiker, R. A., Purser, M. F., & Wysk, R. A. (2014) · Elsevier eBooks · doi:10.1533/9780857097217.176 · Cited by 31
Self-citationSheshadri, P., & Shirwaiker, R. A. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2014.0025 · Cited by 29
Self-citationBioprinting in Regenerative Medicine
Turksen, K. (2015) · Stem cell biology and regenerative medicine · doi:10.1007/978-3-319-21386-6 · Cited by 26
Alginate Hydrogel Has a Negative Impact on in Vitro Collagen 1 Deposition by Fibroblasts
Smith, A. M., Hunt, N. C., Shelton, R. M., Birdi, G., & Grover, L. M. (2012) · Biomacromolecules · doi:10.1021/bm301321d · Cited by 22
Cited by
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
Review of alginate-based hydrogel bioprinting for application in tissue engineering
Rastogi, P., & Kandasubramanian, B. (2019) · Biofabrication · doi:10.1088/1758-5090/ab331e · Cited by 564
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Nicolas, J., Magli, S., Rabbachin, L., Sampaolesi, S., Nicotra, F., & Russo, L. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00045 · Cited by 509
Metadata
- Authors
- Narayanan, L. K., Huebner, P., Fisher, M. B., Spang, J. T., Starly, B., & Shirwaiker, R. A.
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-07-26
- Volume
- 2
- Issue
- 10
- Pages
- 1732-1742
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2461096574
- Cited by
- 293
- References
- 75
- FWCI
- 10.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.