Elastic Modulus of Single Cellulose Microfibrils from Tunicate Measured by Atomic Force Microscopy
The DOI matches its Crossref record; 39 of the 40 references it cites were found in a registry or an index.
Abstract
The elastic modulus of single microfibrils from tunicate ( Halocynthia papillosa ) cellulose was measured by atomic force microscopy (AFM). Microfibrils with cross-sectional dimensions 8 x 20 nm and several micrometers in length were obtained by oxidation of cellulose with 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) as a catalyst and subsequent mechanical disintegration in water and by sulfuric acid hydrolysis. The nanocellulosic materials were deposited on a specially designed silicon wafer with grooves 227 nm in width, and a three-point bending test was applied to determine the elastic modulus using an AFM cantilever. The elastic moduli of single microfibrils prepared by TEMPO-oxidation and acid hydrolysis were 145.2 +/- 31.3 and 150.7 +/- 28.8 GPa, respectively. The result showed that the experimentally determined modulus of the highly crystalline tunicate microfibrils was in agreement with the elastic modulus of native cellulose crystals.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They proposed a value of 145.2 ± 31.3 GPa for microfibrils prepared by TEMPOoxidation and 150.7 ± 28.8 GPa for microfibrils produced by acid hydrolysis [81].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [81]
Citations
Cites
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
Calibration of atomic-force microscope tips
Hutter, J. L., & Bechhoefer, J. (1993) · Review of Scientific Instruments · doi:10.1063/1.1143970 · Cited by 4,194
Nishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493
Self-citationAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Self-citationCellulose: the structure slowly unravels
O'SULLIVAN, A. C. (1997) · Cellulose · doi:10.1023/a:1018431705579 · Cited by 1,499
Elastic and Shear Moduli of Single-Walled Carbon Nanotube Ropes
Salvetat, J.-P., Briggs, G., Bonard, J.-M., Bacsa, R., Kulik, A., Stöckli, T., Burnham, N., & Forró, L. (1999) · Physical Review Letters · doi:10.1103/physrevlett.82.944 · Cited by 1,488
Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation
Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., & Isogai, A. (2009) · Biomacromolecules · doi:10.1021/bm801065u · Cited by 1,271
Self-citationElazzouzi-Hafraoui, S., Nishiyama, Y., Putaux, J.-L., Heux, L., Dubreuil, F., & Rochas, C. (2008) · Biomacromolecules · doi:10.1021/bm700769p · Cited by 1,182
Research works printed but not linked: 3
- Turbak A. F., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 815
- Herrick F. W., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 797
- Xu W., 1994, Scanning Microsc., 8, 499
Cited by
Items 101–200 of 779
Espinosa, E., Bascón-Villegas, I., Rosal, A., Pérez-Rodríguez, F., Chinga-Carrasco, G., & Rodríguez, A. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.08.262 · Cited by 158
From paper to nanopaper: evolution of mechanical and physical properties
González, I., Alcalà, M., Chinga‐Carrasco, G., Vilaseca, F., Boufi, S., & Mutjé, P. (2014) · Cellulose · doi:10.1007/s10570-014-0341-0 · Cited by 168
“The Young’s modulus of a single, highly crystalline nanofibril has been reported to be between 30 and 250 GPa, depending on the author (Yano and Nakahara 2004; Zimmerman et al. 2004; Iwamoto et al. 2009; Saito et al. 2013; Alcala et al. 2013); this variation of results may be a consequence of the different sources of…”
BackgroundCellulose nanofibers/reduced graphene oxide flexible transparent conductive paper
Gao, K., Shao, Z., Wu, X., Wang, X., Li, J., Zhang, Y., Wang, W., & Wang, F. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.03.067 · Cited by 159
Natural Cellulose Nanofibers As Sustainable Enhancers in Construction Cement
Li, J., Su, M., Chen, L., Wang, Y., Zhu, H., & Dai, H. (2016) · PLoS ONE · doi:10.1371/journal.pone.0168422 · Cited by 156
Preparation of cellulose nanofibers using green and sustainable chemistry
Isogai, A., & Bergström, L. (2018) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2018.04.008 · Cited by 161
Self-citationHuman stem cell decorated nanocellulose threads for biomedical applications
Mertaniemi, H., Escobedo‐Lucea, C., Sanz-García, A., Gandía, C., Mäkitie, A. A., Partanen, J. P., Ikkala, O. T., & Yliperttula, M. L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.12.020 · Cited by 152
Nasir, M., Hashim, R., Sulaiman, O., & Asim, M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00011-5 · Cited by 158
Nanocellulose-Based Composite Materials Used in Drug Delivery Systems
Huo, Y., Liu, Y., Xia, M., Du, H., Lin, Z., Li, B., & Liu, H. (2022) · Polymers · doi:10.3390/polym14132648 · Cited by 158
“The hydroxyl groups in nanocellulose can offer a broad range of surface functionalization and generate the reactive-charged nanocellulose composites [43,44].”
BackgroundTensile strength of Iβ crystalline cellulose predicted by molecular dynamics simulation
Wu, X., Moon, R. J., & Martini, A. (2014) · Cellulose · doi:10.1007/s10570-014-0325-0 · Cited by 154
“Also, the strength of cellulose nanofibrils has been measured and reported to be 1.6–3 GPa for woodderived nanofibrils and 3–6 GPa for tunicate-derived nanofibrils (Saito et al. 2013).”
MethodResultInfluentialDíez, I., Eronen, P., Österberg, M., Linder, M. B., Ikkala, O. T., & Ras, R. H. A. (2011) · Macromolecular Bioscience · doi:10.1002/mabi.201100099 · Cited by 158
Cellulose Nanofiber Paper as an Ultra Flexible Nonvolatile Memory
Nagashima, K., Koga, H., Celano, U., Zhuge, F., Kanai, M., Rahong, S., Meng, G., He, Y. J., Boeck, J. D., Jurczak, M., et al. (2014) · Scientific Reports · doi:10.1038/srep05532 · Cited by 147
Strong and Stiff: High-Performance Cellulose Nanocrystal/Poly(vinyl alcohol) Composite Fibers
Lee, W. J., Clancy, A. J., Kontturi, E., Bismarck, A., & Shaffer, M. S. P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11578 · Cited by 153
Utilization of discarded crop straw to produce cellulose nanofibrils and their assemblies
Miao, X., Lin, J., & Bian, F. (2020) · Journal of Bioresources and Bioproducts · doi:10.1016/j.jobab.2020.03.003 · Cited by 150
Shimizu, M., Saito, T., Fukuzumi, H., & Isogai, A. (2014) · Biomacromolecules · doi:10.1021/bm501329v · Cited by 141
Self-citation3D printing of lightweight, super-strong yet flexible all-cellulose structure
Jiang, J., Oğuzlu, H., & Jiang, F. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126668 · Cited by 143
Bharimalla, A. K., Deshmukh, S. P., Vigneshwaran, N., Patil, P. G., & Prasad, V. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2016.1233281 · Cited by 146
Wu, Z., Chen, S., Li, J., Wang, B., Jin, M., Liang, Q., Zhang, D., Han, Z., Deng, L., Qu, X., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214327 · Cited by 148
Xiong, R., Kim, H. S., Zhang, S., Kim, S., Korolovych, V. F., Ma, R., Yingling, Y. G., Lu, C., & Tsukruk, V. V. (2017) · ACS Nano · doi:10.1021/acsnano.7b04235 · Cited by 141
Miao, C., & Hamad, W. Y. (2019) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2019.06.005 · Cited by 144
Jabbour, L., Gerbaldi, C., Chaussy, D., Zeno, E., Bodoardo, S., & Beneventi, D. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01219j · Cited by 136
Crystallite Size Effect on Thermal Conductive Properties of Nonwoven Nanocellulose Sheets
Uetani, K., Okada, T., & Oyama, H. T. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00617 · Cited by 143
Bai, L., Bossa, N., Qu, F., Winglee, J., Li, G., Sun, K., Liang, H., & Wiesner, M. R. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b04280 · Cited by 138
Thermal conductivity analysis and applications of nanocellulose materials
Uetani, K., & Hatori, K. (2017) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2017.1390692 · Cited by 140
Comparison of Cellulose Iβ Simulations with Three Carbohydrate Force Fields
Matthews, J. F., Beckham, G. T., Bergenstråhle‐Wohlert, M., Brady, J. W., Himmel, M. E., & Crowley, M. F. (2012) · Journal of Chemical Theory and Computation · doi:10.1021/ct2007692 · Cited by 131
Development of the metrology and imaging of cellulose nanocrystals
Postek, M. T., Vladár, A. E., Dagata, J. A., Farkas, N., Ming, B., Wagner, R., Raman, A., Moon, R. J., Sabo, R. C., Wegner, T. H., et al. (2010) · Measurement Science and Technology · doi:10.1088/0957-0233/22/2/024005 · Cited by 159
Shaheen, T. I., Montaser, A. S., & Li, S. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.10.081 · Cited by 130
TEMPO-Oxidized Cellulose Nanofibrils Dispersed in Organic Solvents
Okita, Y., Fujisawa, S., Saito, T., & Isogai, A. (2010) · Biomacromolecules · doi:10.1021/bm101255x · Cited by 141
Self-citationYadav, C., Saini, A., Zhang, W., You, X., Chauhan, I., Mohanty, P., & Li, X. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.11.038 · Cited by 130
Wrapping Nanocellulose Nets around Graphene Oxide Sheets
Xiong, R., Kim, H. S., Zhang, L., Korolovych, V. F., Zhang, S., Yingling, Y. G., & Tsukruk, V. V. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201803076 · Cited by 126
Recent advances in nanoengineering cellulose for cargo delivery
Sheikhi, A., Hayashi, J., Eichenbaum, J., Gutin, M., Kuntjoro, N., Khorsandi, D., & Khademhosseini, A. (2018) · Journal of Controlled Release · doi:10.1016/j.jconrel.2018.11.024 · Cited by 131
“The modulus of wood-derived CNF is in the order of 150 GPa [204], supporting the mechanical integrity of CNF nanocomposites, such as capsules.”
BackgroundTEMPO-oxidized cellulose nanofibrils prepared from various plant holocelluloses
Kuramae, R., Saito, T., & Isogai, A. (2014) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2014.06.011 · Cited by 126
Self-citationDilamian, M., & Noroozi, B. (2019) · Cellulose · doi:10.1007/s10570-019-02469-y · Cited by 135
Zhao, G., Du, J., Chen, W., Pan, M., & Chen, D. (2019) · Cellulose · doi:10.1007/s10570-019-02683-8 · Cited by 130
Zhang, X.-Y., Chen, Y.-P., Han, J., Mo, J., Dong, P.-F., Zhuo, Y.-H., & Feng, Y. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.06.172 · Cited by 120
Towards the scalable isolation of cellulose nanocrystals from tunicates
Dunlop, M. J., Clemons, C., Reiner, R., Sabo, R., Agarwal, U. P., Bissessur, R., Sojoudiasli, H., Carreau, P. J., & Acharya, B. (2020) · Scientific Reports · doi:10.1038/s41598-020-76144-9 · Cited by 119
Fukuzumi, H., Saito, T., Iwamoto, S., Kumamoto, Y., Ohdaira, T., Suzuki, R., & Isogai, A. (2011) · Biomacromolecules · doi:10.1021/bm201079n · Cited by 135
Self-citationNeto, A. R. D. S., Araujo, M. A. M., Barboza, R. M. P., Fonseca, A. D. S., Tonoli, G. H. D., Souza, F. V. D., Mattoso, L. H. C., & Marconcini, J. M. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.10.042 · Cited by 131
Duan, J., Gong, S., Gao, Y. L., Xie, X., Jiang, L., & Cheng, Q. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b02156 · Cited by 121
Mechanics of Strong and Tough Cellulose Nanopaper
Meng, Q., & Wang, T. J. (2019) · Applied Mechanics Reviews · doi:10.1115/1.4044018 · Cited by 122
Zdunek, A., Kozioł, A., Pieczywek, P. M., & Cybulska, J. (2014) · Food and Bioprocess Technology · doi:10.1007/s11947-014-1365-z · Cited by 120
“Gibson (2012) reviewed that from X-ray diffraction measurements, Young’s modulus of cellulose was estimated to be in the range 120–170 GPa, which was confirmed by atomic force microscope (AFM) (Iwamoto et al. 2009).”
BackgroundWu, X., Moon, R. J., & Martini, A. (2012) · Cellulose · doi:10.1007/s10570-012-9823-0 · Cited by 125
Cellulose: To depolymerize… or not to?
Coseri, S. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2017.01.002 · Cited by 126
Zhai, T., Zheng, Q., Cai, Z., Turng, L., Xia, H., & Gong, S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01679 · Cited by 121
Pullawan, T., Wilkinson, A. N., & Eichhorn, S. J. (2012) · Biomacromolecules · doi:10.1021/bm300746r · Cited by 123
Stress-Transfer in Anisotropic and Environmentally Adaptive Cellulose Whisker Nanocomposites
Rusli, R., Shanmuganathan, K., Rowan, S. J., Weder, C., & Eichhorn, S. J. (2010) · Biomacromolecules · doi:10.1021/bm1001203 · Cited by 123
Naderi, A., Lindström, T., & Sundström, J. (2015) · Cellulose · doi:10.1007/s10570-015-0576-4 · Cited by 118
Fujisawa, S., Togawa, E., & Kuroda, K. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b01615 · Cited by 116
Development of completely dispersed cellulose nanofibers
Isogai, A. (2018) · Proceedings of the Japan Academy Series B · doi:10.2183/pjab.94.012 · Cited by 122
Self-citationLossada, F., Guo, J., Jiao, D., Groeer, S., Bourgeat‐Lami, É., Montarnal, D., & Walther, A. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01659 · Cited by 116
Hamedi, M. M., Sandberg, M., Olsson, R. T., Pedersen, J., Benselfelt, T., & Wohlert, J. (2025) · Advanced Materials · doi:10.1002/adma.202415787 · Cited by 118
Flexible nanocellulose enhanced Li+ conducting membrane for solid polymer electrolyte
Qin, H., Fu, K. K., Zhang, Y., Ye, Y., Song, M., Kuang, Y., Jang, S., Jiang, F., & Cui, L. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.03.019 · Cited by 111
Araki, J., Yamanaka, Y., & Ohkawa, K. (2012) · Polymer Journal · doi:10.1038/pj.2012.11 · Cited by 115
Cellulosic gel-based triboelectric nanogenerators for energy harvesting and emerging applications
Qin, Y., Zhang, W., Liu, Y., Zhao, J., Yuan, J., Chi, M., Meng, X., Du, G., Cai, C., Wang, S., et al. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.108079 · Cited by 111
Acetylated microfibrillated cellulose as a toughening agent in poly(lactic acid)
Bulota, M., Kreitsmann, K., Hughes, M., & Paltakari, J. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36787 · Cited by 115
Nanofibrillated cellulose and its applications in cement-based composites: A review
Santos, R. F., Ribeiro, J. C. L., de Carvalho, J. M. F., Magalhães, W. L. E., Pedroti, L. G., Nalon, G. H., & de Lima, G. E. S. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123122 · Cited by 114
Sai, H., Li, X., Xiang, J., Cui, L., Jiao, J., Zhao, C., Li, Z., Li, F., & Zhang, T. (2014) · RSC Advances · doi:10.1039/c4ra02752c · Cited by 106
Rosilo, H., Kontturi, E., Seitsonen, J. J. T., Kolehmainen, E. T., & Ikkala, O. T. (2013) · Biomacromolecules · doi:10.1021/bm400185z · Cited by 111
Dai, D., Fan, M., & Collins, P. E. F. (2012) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.11.010 · Cited by 124
Assembling and Redispersibility of Rice Straw Nanocellulose: Effect of tert-Butanol
Jiang, F., & Hsieh, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am505626a · Cited by 104
Advanced nanocellulose-based gas barrier materials: Present status and prospects
Wu, Y., Liang, Y., Mei, C., Cai, L., Nadda, A., Le, Q. V., Peng, Y., Lam, S. S., Sonne, C., & Xia, C. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131891 · Cited by 106
Cao, S., Feng, X., Song, Y., Xue, X., Liu, H., Miao, M., Fang, J., & Shi, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02693 · Cited by 102
Hiraoki, R., Ono, Y., Saito, T., & Isogai, A. (2015) · Biomacromolecules · doi:10.1021/bm501857c · Cited by 100
Self-citationIwamoto, S., Kai, W., Isogai, T., Saito, T., Isogai, A., & Iwata, T. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.01.017 · Cited by 100
Self-citationFeng, Y., Li, X., Li, M., Ye, D., Zhang, Q., You, R., & Xu, W. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01161 · Cited by 98
Long, S., Feng, Y., He, F., He, S., Hong, H., Yang, X., Zheng, L., Liu, J., Gan, L., & Long, M. (2019) · Carbon · doi:10.1016/j.carbon.2019.11.065 · Cited by 95
Konjac glucomannan/cellulose nanofibers composite aerogel supported HKUST-1 for CO2 adsorption
Sun, J., Shang, M., Zhang, M., Yu, S., Yuan, Z., Yi, X., Filatov, S. A., & Zhang, J. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119720 · Cited by 96
Cellulose nanofibres (CNF) for sulphate resistance in cement based systems
Goncalves, J., Bakkari, M. E., Boluk, Y., & Bindiganavile, V. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.03.005 · Cited by 93
Olsson, R. T., Krämer, R. H., López‐Rubio, A., Torres‐Giner, S., Ocio, M. J., & Lagaron, J. M. (2010) · Macromolecules · doi:10.1021/ma100217q · Cited by 94
Nanocellulose for Sensing Applications
Nguyen, L. H., Naficy, S., Chandrawati, R., & Dehghani, F. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201900424 · Cited by 91
Zhang, W., He, X. C., Li, C., Zhang, X., Lu, C., Zhang, X., & Deng, Y. (2013) · Cellulose · doi:10.1007/s10570-013-0141-y · Cited by 94
A review of cellulose nanocrystals and nanocomposites
Ramires, E. C., & Dufresne, A. (2011) · TAPPI Journal · doi:10.32964/tj10.4.9 · Cited by 96
Moud, A. A. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.09.148 · Cited by 90
Wang, M., Olszewska, A., Walther, A., Malho, J., Schacher, F. H., Ruokolainen, J., Ankerfors, M., Laine, J., Berglund, L. A., Österberg, M., et al. (2011) · Biomacromolecules · doi:10.1021/bm101561m · Cited by 97
Cellulose nanomaterials in oil and gas industry: Current status and future perspectives
Li, M., Liu, X., Lv, K., Sun, J., Dai, C., Liao, B., Liu, C., Mei, C., Wu, Q., & Hubbe, M. A. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101187 · Cited by 87
Forouzesh, E., Goel, A., Mackenzie, S. A., & Turner, J. A. (2012) · The Plant Journal · doi:10.1111/tpj.12042 · Cited by 94
Zhan, H., Zuo, T., Tao, R., & Chang, C. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b02137 · Cited by 85
Stepanova, M., & Korzhikova‐Vlakh, E. (2022) · Polymers · doi:10.3390/polym14071477 · Cited by 91
“According to the published data, the practically identified Young’s modulus values for micro/nanocrystals range from 60 to 220 GPa [26,39,44,46,49,73]; for micro/nanofibers from 14 to 84 GPa [39,46,73]; and for a single tunicin microfibril, a value of about 150 GPa has been found [74].”
BackgroundSultana, T., Sultana, S., Nur, H. P., & Khan, M. W. (2020) · Journal of Composites Science · doi:10.3390/jcs4030083 · Cited by 84
Qing, Y., Sabo, R. C., Wu, Y., Zhu, J. Y., & Cai, Z. (2015) · Cellulose · doi:10.1007/s10570-015-0563-9 · Cited by 84
“Among the promising characteristics of cellulosic nanomaterials is their high strength, with the crystalline region of cellulose having an elastic modulus of about 150 GPa (Cheng and Wang 2008; Iwamoto et al. 2009).”
BackgroundTEMPO-oxidized cellulose nanofibril/poly(vinyl alcohol) composite drawn fibers
Endo, R., Saito, T., & Isogai, A. (2012) · Polymer · doi:10.1016/j.polymer.2012.12.035 · Cited by 83
Self-citationKlockars, K. W., Tardy, B. L., Borghei, M., Tripathi, A., Greca, L. G., & Rojas, O. J. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00497 · Cited by 83
Jonasson, S., Bünder, A., Niittylä, T., & Oksman, K. (2019) · Cellulose · doi:10.1007/s10570-019-02754-w · Cited by 85
Implementing reactivity in molecular dynamics simulations with harmonic force fields
Winetrout, J. J., Kanhaiya, K., Kemppainen, J., Veld, P. J. I. ’., Sachdeva, G., Pandey, R., Damirchi, B., van Duin, A. C. T., Odegard, G. M., & Heinz, H. (2024) · Nature Communications · doi:10.1038/s41467-024-50793-0 · Cited by 83
“The[111] crystallographicdirection was used,i.e.,vertical tothe (111) plane.”
MethodCellulose nanofibril reinforced composite electrolytes for lithium ion battery applications
Willgert, M., Leijonmarck, S., Lindbergh, G., Malmström, E., & Johansson, M. K. G. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01139b · Cited by 83
Majoinen, J., Haataja, J. S., Appelhans, D., Lederer, A., Olszewska, A., Seitsonen, J. J. T., Aseyev, V. O., Kontturi, E., Rosilo, H., Österberg, M., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja411401r · Cited by 81
Kassab, Z., Mansouri, S., Tamraoui, Y., Sehaqui, H., Hannache, H., Qaiss, A. E. K., & Achaby, M. E. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.112035 · Cited by 81
Study on microscopic physical and chemical properties of biomass materials by AFM
Lou, Z., Zhang, Y., Li, Y., & Xu, L. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.05.176 · Cited by 84
Deformation of cellulose nanocrystals: entropy, internal energy and temperature dependence
Wohlert, J., Bergenstråhle‐Wohlert, M., & Berglund, L. A. (2012) · Cellulose · doi:10.1007/s10570-012-9774-5 · Cited by 79
“Iwamoto et al. (2009) used a similar AFM setup and measured Young’s moduli of 145 and 151 GPa for single microfibrils obtained TEMPO oxidation and acid hydrolysis respectively.”
MethodCilia-Mimetic Hairy Surfaces Based on End-Immobilized Nanocellulose Colloidal Rods
Lokanathan, A. R., Nykänen, A., Seitsonen, J. J. T., Johansson, L., Campbell, J. M., Rojas, O. J., Ikkala, O. T., & Laine, J. (2013) · Biomacromolecules · doi:10.1021/bm400633r · Cited by 79
Characterization of Various Kinds of Nanocellulose
Ioelovich, M. (2017) · Wiley eBooks · doi:10.1002/9783527689972.ch2 · Cited by 84
Cellulose nanocrystal extraction from rice straw using a chlorine-free bleaching process
Shi, S.-C., & Liu, G.-T. (2021) · Cellulose · doi:10.1007/s10570-021-03889-5 · Cited by 78
“…Kung University (NCKU), Tainan, Taiwan e-mail: scshi@mail.ncku.edu.tw three point bending tests were performed on cellulose, demonstrating that the elastic modulus of cellulose nanofibers and cellulose nanocrystals (CNCs) were 145.2 ± 31.2 and 150 ± 28.8 GPa, respectively (Iwamoto et al. 2009).”
BackgroundInfluentialNaderi, A., Lindström, T., & Pettersson, T. (2014) · Cellulose · doi:10.1007/s10570-014-0329-9 · Cited by 78
Pottathara, Y. B., Bobnar, V., Gorgieva, S., Grohens, Y., Finšgar, M., Thomas, S., & Kokol, V. (2016) · RSC Advances · doi:10.1039/c6ra06744a · Cited by 78
Lee, H., Kim, K., Mun, S. C., Chang, Y. K., & Choi, S. Q. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.104 · Cited by 78
Nanocellulose-Based Composites
Spence, K. L., Habibi, Y., & Dufresne, A. (2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7_7 · Cited by 86
Zhu, B., Merindol, R., Benítez, A., Wang, B., & Walther, A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00410 · Cited by 77
Correia, V. D. C., dos Santos, V. A., Sain, M. M., dos Santos, S. F., Leão, A. L., & Savastano, H. (2016) · Cellulose · doi:10.1007/s10570-016-0996-9 · Cited by 78
Xu, Z., Zhou, H., Tan, S., Jiang, X., Wu, W., Shi, J., & Chen, P. (2018) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.9.49 · Cited by 77
Toivonen, M. S., Kurki-Suonio, S., Wagermaier, W., Hynninen, V., Hietala, S., & Ikkala, O. T. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00059 · Cited by 79
Isolation of Silk Mesostructures for Electronic and Environmental Applications
Zheng, K., Zhong, J., Qi, Z., Ling, S., & Kaplan, D. L. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201806380 · Cited by 76
Metadata
- Authors
- Iwamoto, S., Kai, W., Isogai, A., & Iwata, T.
- Affiliations
- The University of Tokyo (JP)
- Corresponding author
- Iwata, Tadahisa
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-07-31
- Volume
- 10
- Issue
- 9
- Pages
- 2571-2576
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1972994476
- Cited by
- 754
- References
- 40
- Citations by year
- 2026: 27 · 2025: 30 · 2024: 29 · 2023: 45 · 2022: 67 · 2021: 53 · 2020: 58 · 2019: 59 · 2018: 54 · 2017: 60 · 2016: 51 · 2015: 43 · 2014: 52 · 2013: 47 · 2012: 33
- FWCI
- 11.56
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Japan Society for the Promotion of Science (21228007)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Force Microscopy Techniques and Applications
- Keywords
- cellulose microfibrils, tunicate cellulose, elastic modulus, nanocellulose, TEMPO-oxidized cellulose, sulfuric acid hydrolysis, three-point bending, crystalline cellulose
- MeSH terms
- Animals, Cellulose, Hydrolysis, Urochordata, Microscopy, Atomic Force, Microfibrils, Elastic Modulus
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.