Elastic Modulus of Single Cellulose Microfibrils from Tunicate Measured by Atomic Force Microscopy
The DOI matches its Crossref record; 39 of the 40 references it cites were found in a registry or an index.
Abstract
The elastic modulus of single microfibrils from tunicate ( Halocynthia papillosa ) cellulose was measured by atomic force microscopy (AFM). Microfibrils with cross-sectional dimensions 8 x 20 nm and several micrometers in length were obtained by oxidation of cellulose with 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) as a catalyst and subsequent mechanical disintegration in water and by sulfuric acid hydrolysis. The nanocellulosic materials were deposited on a specially designed silicon wafer with grooves 227 nm in width, and a three-point bending test was applied to determine the elastic modulus using an AFM cantilever. The elastic moduli of single microfibrils prepared by TEMPO-oxidation and acid hydrolysis were 145.2 +/- 31.3 and 150.7 +/- 28.8 GPa, respectively. The result showed that the experimentally determined modulus of the highly crystalline tunicate microfibrils was in agreement with the elastic modulus of native cellulose crystals.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They proposed a value of 145.2 ± 31.3 GPa for microfibrils prepared by TEMPOoxidation and 150.7 ± 28.8 GPa for microfibrils produced by acid hydrolysis [81].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [81]
Citations
Cites
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
Calibration of atomic-force microscope tips
Hutter, J. L., & Bechhoefer, J. (1993) · Review of Scientific Instruments · doi:10.1063/1.1143970 · Cited by 4,194
Nishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493
Self-citationAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Self-citationCellulose: the structure slowly unravels
O'SULLIVAN, A. C. (1997) · Cellulose · doi:10.1023/a:1018431705579 · Cited by 1,499
Elastic and Shear Moduli of Single-Walled Carbon Nanotube Ropes
Salvetat, J.-P., Briggs, G., Bonard, J.-M., Bacsa, R., Kulik, A., Stöckli, T., Burnham, N., & Forró, L. (1999) · Physical Review Letters · doi:10.1103/physrevlett.82.944 · Cited by 1,488
Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation
Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., & Isogai, A. (2009) · Biomacromolecules · doi:10.1021/bm801065u · Cited by 1,271
Self-citationElazzouzi-Hafraoui, S., Nishiyama, Y., Putaux, J.-L., Heux, L., Dubreuil, F., & Rochas, C. (2008) · Biomacromolecules · doi:10.1021/bm700769p · Cited by 1,182
Research works printed but not linked: 3
- Turbak A. F., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 815
- Herrick F. W., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 797
- Xu W., 1994, Scanning Microsc., 8, 499
Cited by
Items 401–500 of 779
Structural Characterization and Modifications of Surface-oxidized Cellulose Nanofiber
Isogai, A. (2015) · Journal of the Japan Petroleum Institute · doi:10.1627/jpi.58.365 · Cited by 24
Self-citationTanaka, R., Kashiwagi, Y., Okada, Y., & Inoue, T. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00943 · Cited by 24
Water Soluble Polymer-Based Nanocomposites Containing Cellulose Nanocrystals
George, J., Sabapathy, S. N., & Siddaramaiah (2015) · Advanced structured materials · doi:10.1007/978-81-322-2470-9_9 · Cited by 32
“The tunicate CN obtained by sulfuric acid hydrolysis was deposited on a specially designed silicon wafer with grooves of 227 nm in width, and a three-point bending test was applied using an AFM cantilever (Iwamoto et al. 2009).”
MethodWang, M., Anoshkin, I. V., Nasibulin, A. G., Ras, R. H. A., Nonappa, N., Laine, J., Kauppinen, E. I., & Ikkala, O. T. (2016) · RSC Advances · doi:10.1039/c6ra16202a · Cited by 24
Hoogendoorn, B. W., Birdsong, B. K., Capezza, A. J., Ström, V., Li, Y., Xiao, X. Y., & Olsson, R. T. (2022) · Langmuir · doi:10.1021/acs.langmuir.2c01713 · Cited by 23
Convection-assisted assembly of cellulose nanowhiskers embedded in an acrylic copolymer
Khelifa, F., Habibi, Y., Leclère, P. E. L. G., & Dúbois, P. (2012) · Nanoscale · doi:10.1039/c2nr33194b · Cited by 23
Hierarchical Organisation in the Most Abundant Biopolymer –Cellulose
Khandelwal, M., & Windle, A. H. (2013) · MRS Proceedings · doi:10.1557/opl.2013.379 · Cited by 29
Verker, R., Rivkin, A., Zilberman, G., & Shoseyov, O. (2014) · Cellulose · doi:10.1007/s10570-014-0460-7 · Cited by 23
Bionanomaterial from agricultural waste and its application
Dungani, R., Khalil, H. P. S. A., Aprilia, N. A. S., Sumardi, I., Aditiawati, P., Darwis, A., Karliati, T., Sulaeman, A., Rosamah, E., & Riza, M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00003-6 · Cited by 26
Mechanical properties of polyamide 11 reinforced with cellulose nanofibres from Triodia pungens
Rohner, S., Humphry, J., Chaléat, C. M., Vandi, L., Martin, D. J., Amiralian, N., & Heitzmann, M. T. (2018) · Cellulose · doi:10.1007/s10570-018-1702-x · Cited by 23
de León, R. D., Guzmán, E., López-González, H. R., Elizondo, A. D., Magaña, I., Neira‐Velázquez, M. G., Facio, A. C., & Valencia, L. (2021) · Polymers · doi:10.3390/polym13162699 · Cited by 24
“Finally, all nanocomposites showed a decrease in impact resistance as the concentr tion of m-CNC increased, as seen in Figure 9b; these results coincide with that reported in the literature,[36] whi h shows that the resulting materials increased their rigidity due to the addition of m-CNC, as a consequence of their hi…”
ResultBioinspired Mechanical Gradients in Cellulose Nanofibril/Polymer Nanopapers
Wang, B., Benítez, A., Lossada, F., Merindol, R., & Walther, A. (2016) · Angewandte Chemie · doi:10.1002/ange.201511512 · Cited by 23
Han, L., Wang, W., Zhang, R., Dong, H., Liu, J., Kong, L., & Hou, H. (2019) · Nanomaterials · doi:10.3390/nano9121702 · Cited by 24
“6 nm diameter from cotton [38], 1160 nm length and 16 nm diameter from tunicate [39], and 100–1000 nm length and 10–50 nm diameter from bacterial cellulose [40].”
BackgroundBass, P. S., Zhang, L., Tu, M., & Cheng, Z. ‐. (2018) · Actuators · doi:10.3390/act7040072 · Cited by 22
Cellulose Nanofibers: Electrospinning and Nanocellulose Self‐Assemblies
Hsieh, Y. (2018) · Wiley eBooks · doi:10.1002/9781119323327.ch4 · Cited by 24
Utilizing cellulose-based conducting hydrogels in iontronics
Nyamayaro, K., Hatzikiriakos, S. G., & Mehrkhodavandi, P. (2023) · RSC Sustainability · doi:10.1039/d3su00139c · Cited by 22
High-Modulus Oriented Cellulose Nanopaper
Gindl‐Altmutter, W., Veigel, S., Obersriebnig, M., Tippelreither, C., & Kečkéš, J. (2012) · ACS symposium series · doi:10.1021/bk-2012-1107.ch001 · Cited by 23
Nanocellulose-PE-b-PEG copolymer nanohybrid shish-kebab structure via interfacial crystallization
Ochoa, M., Collazos, N., Le, T., Subramaniam, R., Sanders, M., Singh, R. P., & Depan, D. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.12.028 · Cited by 21
Rehman, Z. U., Niaz, A. K., Song, J., & Koo, B. H. (2021) · Polymers · doi:10.3390/polym13020303 · Cited by 22
“These properties include high specific strength and elastic modulus ~150 GPa combined with low weight [17], high specific surface area [18,19], low thermal expansion coefficient ~10−7 K−1 [20], recyclability and transparency [21].”
BackgroundAraki, J., & Hida, Y. (2018) · Cellulose · doi:10.1007/s10570-017-1640-z · Cited by 21
“…modulus measurements (Nishino et al. 1995) and as 150 GPa from direct bending tests of a single tunicin cellulose nanofiber (CNF) utilizing atomic force microscopy (Iwamoto et al. 2009), whereas its stress at break has been determined as * 6 GPa from cavitation measurements (Saito et al. 2013).”
BackgroundFlexible and transparent films produced from cellulose nanowhisker reinforced agarose
Felfel, R. M., Hossain, K. M. Z., Kabir, S. F., Liew, S. Y., Ahmed, I., & Grant, D. M. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.04.005 · Cited by 21
Shishehbor, M., & Pouranian, M. R. (2020) · Nanomaterials · doi:10.3390/nano10010154 · Cited by 21
“For example, the elastic modulus of CNC in the axial direction is 110–200 GPa [24,28,29] and the reported values for the strength is in the range of 2–6 GPa [28,30,31].”
BackgroundLi, M., Yan, P., Liu, J., Pei, Y., Zheng, X., Tang, K., & Wang, F. (2022) · Cellulose · doi:10.1007/s10570-021-04392-7 · Cited by 20
“Because of their exceptional properties at nanometer size, such as extraordinary elastic modulus of 150 GPa (Iwamoto et al. 2009), low axial thermal expansion coefficient of 10 K (Nishino et al.”
BackgroundInfluentialPolymeric Materials and Microfabrication Techniques for Liquid Filtration Membranes
Kerr-Phillips, T. E., Schon, B. S., & Barker, D. L. A. (2022) · Polymers · doi:10.3390/polym14194059 · Cited by 22
“Cellulose 120,000–220,000 [81] 800–2000 [74] 200–250 [74,82] Philic Acetone, DMF Susceptible to hydrolysis”
BackgroundNovel CNC/silica hybrid as potential reinforcing filler for natural rubber compounds
Ali, S. D., Imiete, I. E., Orlandi, M. E., Castellani, L., Hanel, T., & Zoia, L. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.48332 · Cited by 21
Sawalha, S. H., Milano, F., Guascito, M. R., Bettini, S., Giotta, L., Operamolla, A., Ros, T. D., Prato, M., & Valli, L. (2020) · Carbon · doi:10.1016/j.carbon.2020.05.084 · Cited by 20
AFM Based Nanomechanical Characterization of Cellulose Nanofibril
Parvej, M. S., Wang, X., & Jiang, L. (2020) · Journal of Composite Materials · doi:10.1177/0021998320933955 · Cited by 20
“performed a 3-point bending test on some TEMPO-oxidation and acid hydrolysis treated cellulose microfibril ( 300 nm in diameter) on a microfabricated silicon wafer to find the cellulose longitudinal elastic modulus using an AFM probe.(50) However, the diameter of a single strand of fibril is 1-100 nm and the 3-point b…”
MethodLaaksonen, P. H., Walther, A., Malho, J., Kainlauri, M., Ikkala, O. T., & Linder, M. B. (2011) · Angewandte Chemie · doi:10.1002/ange.201102973 · Cited by 20
Reinforcement of dry and wet paper sheets by cellulose nanofibers
liu, H., Yano, H., & Abe, K. (2022) · Cellulose · doi:10.1007/s10570-022-04888-w · Cited by 20
Engineered living composite materials
Nettersheim, I. H. M. S., Guevara‐Sotelo, N. S., Verdonk, J. C., & Masania, K. (2024) · Composites Science and Technology · doi:10.1016/j.compscitech.2024.110758 · Cited by 23
Mechanical testing of thin film nanocellulose composites using buckling mechanics
Kan, K. H. M., & Cranston, E. D. (2013) · TAPPI Journal · doi:10.32964/tj12.4.9 · Cited by 19
Song, G., Lancelon‐Pin, C., Chen, P., Yu, J., Zhang, J. P., Su, L., Wada, M., Kimura, T., & Nishiyama, Y. (2021) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.1c00576 · Cited by 19
Murase, R., Kondo, S., Kitamura, T., Goi, Y., Hashimoto, M., & Teramoto, Y. (2018) · ACS Applied Bio Materials · doi:10.1021/acsabm.8b00206 · Cited by 18
Brakat, A., & Zhu, H. (2023) · Nanomaterials · doi:10.3390/nano13172399 · Cited by 18
“Fundamentally, highly anisotropic quasi-1D NC [82–84], exhibiting ordered crystalline structures and strong inter–intrachain hydrogen bonds [81], possesses an impressive elastic modulus (150 GPa), similar to Kevlar [102].”
BackgroundFujisawa, S., Togawa, E., & Kimura, S. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2018.05.002 · Cited by 18
Structure and Properties of Cellulose Nanocrystals
Chang, C., Hou, J., Chang, P. R., & Huang, J. T. (2019) · Wiley eBooks · doi:10.1002/9783527807437.ch2 · Cited by 23
Almond shell nanocellulose: Characterization and self-assembling into fibers, films, and aerogels
Fukuda, J., & Hsieh, Y. (2022) · Industrial Crops and Products · doi:10.1016/j.indcrop.2022.115188 · Cited by 18
Derivation of Nanocellulose from Native Rice Husk
Hossain, M. I., Zaman, H., & Rahman, T. (2018) · Chemical Engineering Research Bulletin · doi:10.3329/cerb.v20i1.36926 · Cited by 18
Zwitterionic Polypeptides: Chemoenzymatic Synthesis and Loosening Function for Cellulose Crystals
Tsuchiya, K., Yilmaz, N., Miyamoto, T., Masunaga, H., & Numata, K. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.9b01700 · Cited by 18
Influence of sulfation pretreatment on the structure and properties of cellulose nanofibrils
Wang, X., Feng, X., Chen, G., Lin, B., & Qi, H. (2022) · Industrial Crops and Products · doi:10.1016/j.indcrop.2022.115391 · Cited by 17
Microelectromechanical Systems from Aligned Cellulose Nanocrystal Films
Saha, P., Ansari, N., Kitchens, C. L., Ashurst, W. R., & Davis, V. A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04985 · Cited by 17
Cellulose Nanofiber as Complete Natural Binder for Particleboard
Kojima, Y., Kato, N., Ota, K., Kobori, H., Suzuki, S., Aoki, K., & Ito, H. (2018) · Forest Products Journal · doi:10.13073/fpj-d-18-00034 · Cited by 17
Xu, D., Cheng, Y., Wu, S., Zou, Q., Mondal, A. K., Ning, D., & Huang, F. (2022) · Cellulose · doi:10.1007/s10570-022-04445-5 · Cited by 17
“The improvements of the tensile stress and elastic modulus of tCNC-SA film are due to the inherent advantages of high aspect ratio and high elastic modulus of tCNCs, which shows excellent reinforcement in the polymer matrix (Iwamoto et al. 2009; Xu et al. 2021).”
BackgroundPras, O., Beneventi, D., Chaussy, D., Piette, P., & Tapin‐Lingua, S. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7496-1 · Cited by 17
Effect of cellulose microfibril (CMF) addition on strength properties of middle ply of board
Lehmonen, J., Pere, J., Hytönen, E., & Kangas, H. (2016) · Cellulose · doi:10.1007/s10570-016-1146-0 · Cited by 17
Spinning Approach for Cellulose Fiber Yarn Using a Deep Eutectic Solvent and an Inclined Channel
Klar, V., Orelma, H., Rautkoski, H., Kuosmanen, P., & Harlin, A. (2018) · ACS Omega · doi:10.1021/acsomega.8b01458 · Cited by 17
Khatri, V., Jafari, M., Gaudreault, R., Beauregard, M., Siaj, M., Archambault, D., Loranger, É., & Bourgault, S. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00786 · Cited by 16
Cellulose Nanocrystals-Based Nanocomposites
Nagalakshmaiah, M., Rajinipriya, M., Afrin, S., Ansari, M. A., Asad, M., & Karim, Z. (2019) · Springer eBooks · doi:10.1007/978-3-030-05825-8_3 · Cited by 19
Dynamic Self-Assembly of Polyelectrolyte Composite Nanomaterial Film
Hou, Q., Wang, X., & Ragauskas, A. J. (2019) · Polymers · doi:10.3390/polym11081258 · Cited by 16
Biocompatible composite of cellulose nanocrystal and hydroxyapatite with large mechanical strength
Sato, R., Arita, T., Shimada, R., Nohara, T., Tabata, K., Koseki, K., Umemoto, K., & Masuhara, A. (2020) · Cellulose · doi:10.1007/s10570-020-03550-7 · Cited by 16
3D printing of carbon-based materials for supercapacitors
Jiang, H., Mi, S., & Wan, J. (2021) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-021-00323-1 · Cited by 17
Wrapping Nanocellulose Nets around Graphene Oxide Sheets
Xiong, R., Kim, H. S., Zhang, L., Korolovych, V. F., Zhang, S., Yingling, Y. G., & Tsukruk, V. V. (2018) · Angewandte Chemie · doi:10.1002/ange.201803076 · Cited by 16
Interpretation of Strengthening Mechanism of Densified Wood from Supramolecular Structures
Li, K., Zhao, L., Ren, J., & He, B. (2022) · Molecules · doi:10.3390/molecules27134167 · Cited by 16
“0 GPa [8] and crystalline cellulose I with the axial elastic modulus up to 130 to 150 GPa [9,10].”
BackgroundInfluentialDevelopment of a complex bone tissue culture system based on cellulose nanowhisker mechanical strain
Kim, D. S., Jung, S.-M., Yoon, G. H., Lee, H. C., & Shin, H. S. (2014) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2014.10.031 · Cited by 16
A finite strain fibre-reinforced viscoelasto-viscoplastic model of plant cell wall growth
Huang, R., Becker, A. A., & Jones, I. A. (2015) · Journal of Engineering Mathematics · doi:10.1007/s10665-014-9761-y · Cited by 16
“The Young’s modulus of the mature cell wall matrix is chosen as E = 1.55 GPa to fit the elastic deformation (shrinkage) when turgor pressure drops ([16], Fig.”
BackgroundInfluentialGoodsell, J. E., Moon, R. J., Huizar, A., & Pipes, R. B. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-01-p085-094 · Cited by 16
Cellulose nanoparticles as reinforcement in polymer nanocomposites
Ramires, E. C., & Dufresne, A. (2012) · Elsevier eBooks · doi:10.1533/9780857096241.1.131 · Cited by 19
Kareem, F., Chandrawati, R., & Ahmed, M. U. (2024) · Measurement · doi:10.1016/j.measurement.2024.115499 · Cited by 17
Cellulose fiber/nanofiber from natural sources including waste-based sources
Nishino, T. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100783-9.00010-1 · Cited by 17
Antibody Immobilization on Sulfated Cellulose Nanocrystals
Nori, U. M., Gomez‐Maldonado, D., Saha, P., Ashurst, W. R., Peresin, M. S., & Davis, V. A. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.2c00877 · Cited by 15
Self‐Assembly of Native Cellulose Nanostructures
Lokanathan, A. R., Gröschel, A. H., Linder, M. B., Rojas, O. J., & Ikkala, O. T. (2017) · Wiley eBooks · doi:10.1002/9783527689972.ch4 · Cited by 16
Polymers at the Interface with Biology
Deming, T. J., Klok, H., Armes, S. P., Becker, M. L., Champion, J. A., Chen, E. Y. ‐., Heilshorn, S. C., van Hest, J. C. M., Irvine, D. J., Johnson, J. A., et al. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01029 · Cited by 15
Cellulose Nanofibrils: From Hydrogels to Aerogels
Beaumont, M., Potthast, A., & Rosenau, T. (2018) · Wiley eBooks · doi:10.1002/9781119217619.ch13 · Cited by 17
Jia, F. L., Amar, M. B., Billoud, B., & Charrier, B. (2017) · Journal of The Royal Society Interface · doi:10.1098/rsif.2016.0596 · Cited by 14
Reductive Amination Reaction for the Functionalization of Cellulose Nanocrystals
Omar, O. H., Giannelli, R., Colaprico, E., Capodieci, L., Babudri, F., & Operamolla, A. (2021) · Molecules · doi:10.3390/molecules26165032 · Cited by 14
Andersson, R. L., Salajková, M., Mallon, P. E., Berglund, L. A., Hedenqvist, M. S., & Olsson, R. T. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0486-6 · Cited by 15
KATAGIRI, K., Honda, S., Minami, S., Yamaguchi, S., Kawakita, S., Sonomura, H., Ozaki, T., Uchida, S., Nedu, M., Yoshioka, Y., et al. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.05.022 · Cited by 14
Nanocellulose production from natural and recyclable sources: A review
Noor, S. M., Anuar, A. N., Tamunaidu, P., Goto, M., Shameli, K., & Halim, M. H. A. (2020) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/479/1/012027 · Cited by 14
Mohan, S., Jose, J., Kuijk, A., Veen, S. J., van Blaaderen, A., & Velikov, K. P. (2017) · ACS Omega · doi:10.1021/acsomega.7b00536 · Cited by 14
Alam, P. (2018) · Results and problems in cell differentiation · doi:10.1007/978-3-319-92486-1_25 · Cited by 14
Tribological and mechanical properties of cellulose/PMMA composite
Shi, S.-C., Lin, C.-F., Liu, C.-F., & Chen, T. (2022) · Polymers and Polymer Composites · doi:10.1177/09673911221140935 · Cited by 18
Cellulose nanomaterial metrology: microscopy measurements
Johnston, L. J. (2024) · Nanoscale · doi:10.1039/d4nr02276a · Cited by 13
Uetani, K., Izakura, S., Kasuga, T., Koga, H., & Nogi, M. (2018) · Colloids and Interfaces · doi:10.3390/colloids2040071 · Cited by 14
Exploring tannin extracts: Introduction to new bio-based materials
Missio, A. L., Gatto, D. A., & Tondi, G. (2019) · Revista Ciência da Madeira - RCM · doi:10.12953/2177-6830/rcm.v10n1p88-102 · Cited by 13
“One of the main attributes of CNFs – individually or in a nanocellulose matrix, which adds to their value - is the high mechanical strength, such as the high modulus of elasticity that ranges between 10 to 150 GPa (IWAMOTO et al., 2009; LEE et al., 2012).”
BackgroundEsterification of Cellulose Nanofibers with Valeric Acid and Hexanoic Acid
Her, K., Jeon, S. H., Lee, S., & Shim, B. S. (2020) · Macromolecular Research · doi:10.1007/s13233-020-8146-5 · Cited by 13
Relatively Independent Motion of a Continuous Nanocellulose Network in a Polymer Matrix
Li, K., Wang, Y., Chen, X., Sun, B., & Liu, Y. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.1c00377 · Cited by 13
General Overview of Biopolymers: Structure, Properties, and Applications
Winkworth-Smith, C. G., & Foster, T. J. (2013) · Wiley eBooks · doi:10.1002/9783527652457.ch2 · Cited by 15
Winetrout, J. J., Kanhaiya, K., Sachdeva, G., Pandey, R., Damirchi, B., van Duin, A. C. T., Odegard, G. M., & Heinz, H. (2021) · arXiv (Cornell University) · Cited by 13
Patterson, G. D., McManus, J. D., Orts, W. J., & Hsieh, Y. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.2c01478 · Cited by 12
Matsuo, Y., Sato, R., Tabata, K., Makino, T., Saito, T., Sato, K., Arita, T., & Masuhara, A. (2024) · Cellulose · doi:10.1007/s10570-024-05763-6 · Cited by 12
“CNCs show excellent properties for use in various potential applications, including high mechanical strength and nontoxicity, as demonstrated by their tensile strength of 7.5 GPa and Young’s modulus of 150 GPa (Iwamoto et al. 2009; Dufresne 2017; Weiss et al. 2021).”
InfluentialBasta, A. H., & Lotfy, V. F. (2023) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-023-03916-4 · Cited by 12
“It is interesting to note that, the aspect ratio of our case is lower than those prepared other cellulosic sources, such as wood (L/W:35–38) [47], ramie (L/W:25–42) [48], sisal (L/W:43) [49], bacteria (L/W:60–80) [50] and tunicate (251–493) [51].”
Chen, M., Zhang, H., & Wu, Y. (2023) · RSC Advances · doi:10.1039/d3ra03481j · Cited by 12
Mechanical Properties of Natural Material‐Based Packaging Films: Current Scenario
George, J., Navaf, M., Raju, A. P., Kumar, R., & Sunooj, K. V. (2023) · Wiley eBooks · doi:10.1002/9783527837304.ch13 · Cited by 15
Preparation of cellulose nanocomposites
Dufresne, A. (2011) · Elsevier eBooks · doi:10.1533/9780857092281.1.82 · Cited by 13
Nanocellulose-Based Polymeric Blends for Coating Applications
Khelifa, F., Habibi, Y., & Dúbois, P. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-44248-0.00005-5 · Cited by 12
Milano, F., Guascito, M. R., Semeraro, P., Sawalha, S. H., Ros, T. D., Operamolla, A., Giotta, L., Prato, M., & Valli, L. (2021) · Polymers · doi:10.3390/polym13020243 · Cited by 12
Kurokawa, N., Matsumoto, K., & Hotta, A. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109402 · Cited by 12
NMR Relaxometry Studies on the Drying Kinetics of Cellulose Nanofibers
Suekuni, M. T., D’Souza, N., & Allgeier, A. M. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c04878 · Cited by 12
Elastic properties of natural single nanofibres
Fernandes, F. M., Vázquez, L., Ruiz‐Hitzky, E., López, A. C., & Castro, M. (2014) · RSC Advances · doi:10.1039/c3ra47452f · Cited by 12
Extraction and properties of cellulose for polymer composites
Gond, R. K., Gupta, M. K., Singh, H., Rangappa, S. M., & Siengchin, S. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823791-5.00011-9 · Cited by 11
Liu, W., Shomali, A., Zhang, C., Coasne, B., Carmeliet, J., & Derome, D. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122429 · Cited by 11
Padilla, C. R., Pępczyńska, M., Vizueta, C., Quero, F., Díaz‐Calderón, P., MacNaughtan, W., Foster, T. J., & Enrione, J. I. (2024) · Gels · doi:10.3390/gels10120766 · Cited by 11
Fouly, A., Daoush, W. M., Elqady, H. I., & Abdo, H. S. (2024) · Friction · doi:10.1007/s40544-024-0940-1 · Cited by 12
Abe, K. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.10.069 · Cited by 11
Stiffness‐Changing of Polymer Nanocomposites with Cellulose Nanocrystals and Polymeric Dispersant
Meesorn, W., Zoppe, J. O., & Weder, C. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201800910 · Cited by 11
Zhou, X. H., Hao, Y., Zhang, X., He, X., & Zhang, C. (2021) · Physical Sciences Reviews · doi:10.1515/psr-2020-0067 · Cited by 13
Kim, D. W., Han, S., Lee, H., Shin, J., & Choi, S. Q. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118847 · Cited by 11
Sun, H. Y., Ji, T., Ren, Z., Bi, H., Xu, M., Huang, Z., & Cai, L. (2022) · Industrial Crops and Products · doi:10.1016/j.indcrop.2022.114749 · Cited by 11
Programming material properties by tuning intermolecular bonding
Ray, U., Pang, Z., & Li, T. (2022) · Journal of Applied Physics · doi:10.1063/5.0123058 · Cited by 11
Araki, J., & Arita, T. (2017) · Chemistry Letters · doi:10.1246/cl.170588 · Cited by 11
Metadata
- Authors
- Iwamoto, S., Kai, W., Isogai, A., & Iwata, T.
- Affiliations
- The University of Tokyo (JP)
- Corresponding author
- Iwata, Tadahisa
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-07-31
- Volume
- 10
- Issue
- 9
- Pages
- 2571-2576
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1972994476
- Cited by
- 754
- References
- 40
- Citations by year
- 2026: 27 · 2025: 30 · 2024: 29 · 2023: 45 · 2022: 67 · 2021: 53 · 2020: 58 · 2019: 59 · 2018: 54 · 2017: 60 · 2016: 51 · 2015: 43 · 2014: 52 · 2013: 47 · 2012: 33
- FWCI
- 11.56
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Japan Society for the Promotion of Science (21228007)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Force Microscopy Techniques and Applications
- Keywords
- cellulose microfibrils, tunicate cellulose, elastic modulus, nanocellulose, TEMPO-oxidized cellulose, sulfuric acid hydrolysis, three-point bending, crystalline cellulose
- MeSH terms
- Animals, Cellulose, Hydrolysis, Urochordata, Microscopy, Atomic Force, Microfibrils, Elastic Modulus
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.