Elastic Modulus of Single Cellulose Microfibrils from Tunicate Measured by Atomic Force Microscopy
The DOI matches its Crossref record; 39 of the 40 references it cites were found in a registry or an index.
Abstract
The elastic modulus of single microfibrils from tunicate ( Halocynthia papillosa ) cellulose was measured by atomic force microscopy (AFM). Microfibrils with cross-sectional dimensions 8 x 20 nm and several micrometers in length were obtained by oxidation of cellulose with 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) as a catalyst and subsequent mechanical disintegration in water and by sulfuric acid hydrolysis. The nanocellulosic materials were deposited on a specially designed silicon wafer with grooves 227 nm in width, and a three-point bending test was applied to determine the elastic modulus using an AFM cantilever. The elastic moduli of single microfibrils prepared by TEMPO-oxidation and acid hydrolysis were 145.2 +/- 31.3 and 150.7 +/- 28.8 GPa, respectively. The result showed that the experimentally determined modulus of the highly crystalline tunicate microfibrils was in agreement with the elastic modulus of native cellulose crystals.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They proposed a value of 145.2 ± 31.3 GPa for microfibrils prepared by TEMPOoxidation and 150.7 ± 28.8 GPa for microfibrils produced by acid hydrolysis [81].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [81]
Citations
Cites
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
Calibration of atomic-force microscope tips
Hutter, J. L., & Bechhoefer, J. (1993) · Review of Scientific Instruments · doi:10.1063/1.1143970 · Cited by 4,194
Nishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493
Self-citationAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Self-citationCellulose: the structure slowly unravels
O'SULLIVAN, A. C. (1997) · Cellulose · doi:10.1023/a:1018431705579 · Cited by 1,499
Elastic and Shear Moduli of Single-Walled Carbon Nanotube Ropes
Salvetat, J.-P., Briggs, G., Bonard, J.-M., Bacsa, R., Kulik, A., Stöckli, T., Burnham, N., & Forró, L. (1999) · Physical Review Letters · doi:10.1103/physrevlett.82.944 · Cited by 1,488
Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation
Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., & Isogai, A. (2009) · Biomacromolecules · doi:10.1021/bm801065u · Cited by 1,271
Self-citationElazzouzi-Hafraoui, S., Nishiyama, Y., Putaux, J.-L., Heux, L., Dubreuil, F., & Rochas, C. (2008) · Biomacromolecules · doi:10.1021/bm700769p · Cited by 1,182
Research works printed but not linked: 3
- Turbak A. F., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 815
- Herrick F. W., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 797
- Xu W., 1994, Scanning Microsc., 8, 499
Cited by
Items 201–300 of 779
Cellulose nanofibrils extracted from the byproduct of cotton plant
Miao, X., Lin, J., Tian, F., Li, X., Bian, F., & Wang, J. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.09.056 · Cited by 76
Geng, S., Haque, M. M., & Oksman, K. (2016) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.02.013 · Cited by 77
Bioinspired Mechanical Gradients in Cellulose Nanofibril/Polymer Nanopapers
Wang, B., Benítez, A., Lossada, F., Merindol, R., & Walther, A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511512 · Cited by 79
Yin, J., Fan, W., Du, J., Feng, W., Dong, Z., Liu, Y., & Zhou, T. (2019) · Environmental Pollution · doi:10.1016/j.envpol.2019.113847 · Cited by 74
Micro- and nano-fillers used in the rubber industry
Song, K. (2016) · Elsevier eBooks · doi:10.1016/b978-0-08-100409-8.00002-4 · Cited by 73
AFM-based mechanical characterization of single nanofibres
Neugirg, B. R., Koebley, S. R., Schniepp, H. C., & Fery, A. (2016) · Nanoscale · doi:10.1039/c6nr00863a · Cited by 78
Youssefian, S., Jakes, J. E., & Rahbar, N. (2017) · Scientific Reports · doi:10.1038/s41598-017-02288-w · Cited by 72
Lignocellulosic Films: Preparation, Properties, and Applications
Du, H., Liu, K., Xu, T., Xu, C., Lin, M., Fang, Z., Kim, S., Seo, J., Chen, J., Ma, H., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.5c00267 · Cited by 73
A non-solvent approach for high-stiffness all-cellulose biocomposites based on pure wood cellulose
Nilsson, H., Galland, S., Larsson, P. T., Gamstedt, E. K., Nishino, T., Berglund, L. A., & Iversen, T. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.06.016 · Cited by 74
Wang, K., Taylor, K. G., & Ma, L. (2021) · International Journal of Coal Geology · doi:10.1016/j.coal.2021.103852 · Cited by 75
Highly Porous Paper Loading with Microfibrillated Cellulose by Spray Coating on Wet Substrates
Beneventi, D., Chaussy, D., Curtil, D., Zolin, L., Gerbaldi, C., & Penazzi, N. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie500955x · Cited by 69
Fujisawa, S., Saito, T., Kimura, S., Iwata, T., & Isogai, A. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.10.021 · Cited by 72
Self-citationShimizu, M., Saito, T., & Isogai, A. (2014) · Biomacromolecules · doi:10.1021/bm500384d · Cited by 69
Self-citationAlcalà, M., González, I., Boufi, S., Vilaseca, F., & Mutjé, P. (2013) · Cellulose · doi:10.1007/s10570-013-0085-2 · Cited by 73
“The results obtained showed a Young’s modulus average value of 161.05 GPa, a value slightly superior to those found in the literature (Yano and Nakahara 2004; Zimmermann et al. 2004; Iwamoto et al. 2009; Saito et al. 2013).”
MethodResultInfluentialKhodayari, A., Hirn, U., Spirk, S., Ogawa, Y., Seveno, D., & Thielemans, W. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122415 · Cited by 70
MARTINI Coarse-Grained Model for Crystalline Cellulose Microfibers
López, C. A., Bellesia, G., Redondo, A., Langan, P. A., Chundawat, S. P. S., Dale, B. E., Marrink, . J., & Gnanakaran, S. (2014) · The Journal of Physical Chemistry B · doi:10.1021/jp5105938 · Cited by 68
Cellulose Mineralization as a Route for Novel Functional Materials
Shchipunov, Y. A., & Postnova, I. V. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705042 · Cited by 69
Holocellulose Nanocrystals: Amphiphilicity, Oil/Water Emulsion, and Self-Assembly
Jiang, F., & Hsieh, Y. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00240 · Cited by 66
Koga, H., Azetsu, A., Tokunaga, E., Saito, T., Isogai, A., & Kitaoka, T. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm15661j · Cited by 73
Self-citationModels of supramolecular structure and properties of cellulose
Ioelovich, M. (2016) · Polymer Science Series A · doi:10.1134/s0965545x16060109 · Cited by 75
Pelegrini, B. L., Ré, F., de Oliveira, M. M., Fernandes, T., de Oliveira, J. H., de Oliveira, A. G., Girotto, E. M., Nakamura, C. V., Sampaio, A. R., Valim, A., et al. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201900092 · Cited by 68
Lindström, T., & Aulin, C. (2014) · Scandinavian Journal of Forest Research · doi:10.1080/02827581.2014.928365 · Cited by 65
“…No. 4, 345–351, http://dx.doi.org/10.1080/02827581.2014.928365 © 2014 Taylor & Francis properties, combining high stiffness in the range of 29–145 GPa (Iwamoto et al. 2009; Tanpichai et al. 2012) with a lightweight character (density ca. 1.5 g/cm3) and a large specific surface area, 482 m2/g,…”
BackgroundInfluentialMorel, A., Domaschke, S., Kumaran, V. U., Alexeev, D., Sadeghpour, A., Ramakrishna, S. N., Ferguson, S. J., Rossi, R. M., Mazza, E., Ehret, A. E., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.09.055 · Cited by 66
Tang, A., Li, J., Li, J., Zhao, S., Liu, W., Liu, T., Wang, J., & Liu, Y. (2019) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2019.1602904 · Cited by 65
“ical strength for all the hydrogel, aerogels and wet-aerogel scaffolds, owing to their strong hydrogen bonding [37,38].”
BackgroundElectric field-induced alignment of nanofibrillated cellulose in thermoplastic polyurethane matrix
Xu, S., Liu, D., Zhang, Q., & Fu, Q. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.12.017 · Cited by 64
Yurtsever, A., Wang, P., Priante, F., Jaques, Y. M., Miyazawa, K., MacLachlan, M. J., Foster, A. S., & Fukuma, T. (2022) · Science Advances · doi:10.1126/sciadv.abq0160 · Cited by 66
“2 of 12 wood- and tunicate-derived CNCs (34, 35).”
Overview of preparation, modification, and application of tunicate-derived nanocellulose
Lv, X., Han, J., Liu, M., Yu, H., Liu, K., Yang, Y., Sun, Y., Pan, P., Liang, Z., Chang, L., et al. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.139439 · Cited by 63
Measuring the Elasticity of Poly‐ l ‐Proline Helices with Terahertz Spectroscopy
Ruggiero, M. T., Šibík, J., Orlando, R., Zeitler, J. A., & Korter, T. M. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201602268 · Cited by 63
Wang, J., Li, X., Cheng, Q., Lv, F., Chang, C., & Zhang, L. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115470 · Cited by 62
Shimizu, M., Fukuzumi, H., Saito, T., & Isogai, A. (2013) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2013.04.021 · Cited by 62
Self-citationSize effects on the nanomechanical properties of cellulose I nanocrystals
Pakzad, A., Simonsen, J., Heiden, P. A., & Yassar, R. S. (2011) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2011.288 · Cited by 65
Micromechanics of TEMPO-Oxidized Fibrillated Cellulose Composites
Bulota, M., Tanpichai, S., Hughes, M., & Eichhorn, S. J. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am201399q · Cited by 62
Fast and Robust Nanocellulose Width Estimation Using Turbidimetry
Shimizu, M., Saito, T., Nishiyama, Y., Iwamoto, S., Yano, H., Isogai, A., & Endo, T. (2016) · Macromolecular Rapid Communications · doi:10.1002/marc.201600357 · Cited by 61
Self-citationEffect of thermal maturation on chemical structure and nanomechanical properties of solid bitumen
Liu, Y., Xiong, Y., Li, Y., & Peng, P. (2017) · Marine and Petroleum Geology · doi:10.1016/j.marpetgeo.2017.12.008 · Cited by 61
Geng, S., Wei, J., Aitomäki, Y., Noël, M., & Oksman, K. (2018) · Nanoscale · doi:10.1039/c7nr09080c · Cited by 61
Hierarchical biopolymer‐based materials and composites
Fredricks, J. L., Jimenez, A. M., Grandgeorge, P., Meidl, R. A., Law, E., Fan, J., & Roumeli, E. (2023) · Journal of Polymer Science · doi:10.1002/pol.20230126 · Cited by 64
Báez, C., Considine, J., & Rowlands, R. E. (2014) · Cellulose · doi:10.1007/s10570-013-0159-1 · Cited by 63
Wang, W., Sabo, R. C., Mozuch, M. D., Kersten, P. J., Zhu, J. Y., & Jin, Y. (2015) · Journal of Polymers and the Environment · doi:10.1007/s10924-015-0726-7 · Cited by 60
“The elemental fibrils or microfibrils have been reported to have remarkable mechanical properties with an elastic modulus measured to be about 150 GPa [4].”
BackgroundProperties of poly(acrylamide)/TEMPO-oxidized cellulose nanofibril composite films
Kurihara, T., & Isogai, A. (2013) · Cellulose · doi:10.1007/s10570-013-0124-z · Cited by 61
“TOCN elements maintaining sufficiently nano-dispersed states in matrix polymers, the individual TOCN elements will efficiently mechanically reinforce TOCN/polymer composites (Li et al. 2010) owing to the high Young’ modulus (&140 GPa) and ultimate tensile strength (1–3 GPa) of TOCNs (Iwamoto et al. 2009; Saito et al.…”
BackgroundSelf-citationLee, J., Yoon, M.-J., Lee, E.-S., Lim, D., & Kim, K.-Y. (2014) · Macromolecular Research · doi:10.1007/s13233-014-2121-y · Cited by 61
Cellulose crystals plastify by localized shear
Molnár, G., Rodney, D., Martoïa, F., Dumont, P., Nishiyama, Y., Mazeau, K., & Orgéas, L. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1800098115 · Cited by 58
Liu, C., Shao, Z., Wang, J., Lu, C., & Wang, Z. (2016) · RSC Advances · doi:10.1039/c6ra18471e · Cited by 57
Versatile nanocellulose-based nanohybrids: A promising-new class for active packaging applications
Abdalkarim, S. Y. H., Chen, L., Yu, H., Li, F., Chen, X., Zhou, Y., & Tam, K. C. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.05.169 · Cited by 57
Nanocellulose-based nanogenerators for sensor applications: A review
Lv, Q., Ma, X., Zhang, C., Han, J., He, S., Liu, K., & Jiang, S. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.129268 · Cited by 58
Pullawan, T., Wilkinson, A. N., Zhang, L., & Eichhorn, S. J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.12.066 · Cited by 58
Tessellation of Chiral‐Nematic Cellulose Nanocrystal Films by Microtemplating
Tardy, B. L., Mattos, B. D., Greca, L. G., Kämäräinen, T., Klockars, K. W., & Rojas, O. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808518 · Cited by 56
Basta, A. H., & Lotfy, V. F. (2023) · Cellulose · doi:10.1007/s10570-023-05560-7 · Cited by 55
Naderi, A., & Lindström, T. (2014) · Cellulose · doi:10.1007/s10570-014-0394-0 · Cited by 55
“2009), high strength modulus (Iwamoto et al. 2009), and the ability to form strong percolating networks, to mention but a few properties.”
BackgroundProperties of phosphorylated cellulose nanofiber dispersions under various conditions
Noguchi, Y., Homma, I., & Watanabe, T. (2019) · Cellulose · doi:10.1007/s10570-019-02922-y · Cited by 55
“…Center, Innovation Promotion Division, Oji Holdings Corporation, 1-10-6 Shinonome, Koto-ku, Tokyo 135-8558, Japan e-mail: noguchi6891yu1@oji-gr.com Iwamoto et al. 2009; Wohlert et al. 2012), and a low thermal expansion coefficient (Sakurada et al. 1962; Šturcová et al. 2005; Iwamoto et al.…”
BackgroundShi, X. C., Cantu‐Crouch, D., Sharma, V., Pruitt, J. D., Yao, G., Fukazawa, K., Wu, J. Y., & Ishihara, K. (2020) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2020.111539 · Cited by 55
Liu, X., Zhang, Y., Liu, Y., Hua, S., Meng, F., Ma, Q., Kong, L., Pan, S., & Che, Y. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.124365 · Cited by 56
Nanomechanics of Cells and Biomaterials Studied by Atomic Force Microscopy
Kilpatrick, J. I., Revenko, I., & Rodriguez, B. J. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500229 · Cited by 57
Stiff as a Board: Perspectives on the Crystalline Modulus of Cellulose
Eichhorn, S. J. (2012) · ACS Macro Letters · doi:10.1021/mz300420k · Cited by 54
Fatigue‐Resistant Bioinspired Graphene‐Based Nanocomposites
Wan, S., & Cheng, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703459 · Cited by 54
Zhu, Q., Zhou, R., Liu, J., Sun, J., & Wang, Q. (2021) · Nanomaterials · doi:10.3390/nano11051353 · Cited by 54
“As a powerful and multifunctional technique, AFM offers a multitude of different acquisition modes and provides valuable information at the nanoscale on CNMs morphology [6,17], orientation [18,19], architecture deconstruction [20,21], mechanical strength [22], and adhesive properties [23].”
MethodLindström, T., Aulin, C., Naderi, A., & Ankerfors, M. (2014) · Wiley eBooks · doi:10.1002/0471440264.pst614 · Cited by 64
Shishehbor, M., & Zavattieri, P. D. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.12.002 · Cited by 53
Swelling of cellulosic fibers in aqueous systems: A Review of chemical and mechanistic factors
Hubbe, M. A., Sjöstrand, B., Lestelius, M., Håkansson, H., Swerin, A., & Henriksson, G. (2024) · BioResources · doi:10.15376/biores.19.3.hubbe · Cited by 57
Schmitt, J., Calabrese, V., da Silva, M. A., Lindhoud, S., Alfredsson, V., Scott, J. L., & Edler, K. J. (2018) · Physical Chemistry Chemical Physics · doi:10.1039/c8cp00355f · Cited by 57
Liu, Y., Sokolov, I. Y., Dokukin, M., Xiong, Y., & Peng, P. (2020) · Nanoscale · doi:10.1039/d0nr02314k · Cited by 52
Dehydration-induced physical strains of cellulose microfibrils in plant cell walls
Huang, S., Makarem, M., Kiemle, S. N., Zheng, Y., He, X., Ye, D., Gomez, E. W., Gomez, E. D., Cosgrove, D. J., & Kim, S. H. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.05.091 · Cited by 51
Material design of nanocellulose/polymer composites via Pickering emulsion templating
Fujisawa, S. (2020) · Polymer Journal · doi:10.1038/s41428-020-00408-4 · Cited by 53
Stress transfer in microfibrillated cellulose reinforced poly(vinyl alcohol) composites
Tanpichai, S., Sampson, W. W., & Eichhorn, S. J. (2014) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.06.014 · Cited by 51
“Values in the range 29-180 GPa have been reported for cellulose fibrils produced from a variety of sources including wood fibres [14, 15], bacterial cellulose [16, 17], tunicates [18] and regenerated cellulose [14].”
BackgroundTanaka, R., Saito, T., Hänninen, T., Ono, Y., Hakalahti, M., Tammelin, T., & Isogai, A. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00316 · Cited by 56
Self-citationCharging and Aggregation Behavior of Cellulose Nanofibers in Aqueous Solution
Sato, Y., Kusaka, Y., & Kobayashi, M. (2017) · Langmuir · doi:10.1021/acs.langmuir.7b02742 · Cited by 50
Strong ultralight foams based on nanocrystalline cellulose for high-performance insulation
Wang, P., Aliheidari, N., Zhang, X., & Ameli, A. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.04.059 · Cited by 51
Low-Birefringent and Highly Tough Nanocellulose-Reinforced Cellulose Triacetate
Soeta, H., Fujisawa, S., Saito, T., Berglund, L. A., & Isogai, A. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02863 · Cited by 48
Self-citationBoujemaoui, A., Carlsson, L., Malmström, E., Lahcini, M., Berglund, L. A., Sehaqui, H., & Carlmark, A. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300537h · Cited by 49
Polymer nanocomposites with nanorods having different length distributions
Sapkota, J., Shirole, A., Foster, E. J., Martinez-Garcia, J. C., Lattuada, M., & Weder, C. (2016) · Polymer · doi:10.1016/j.polymer.2016.12.010 · Cited by 48
High aspect ratio nanocellulose from an extremophile spinifex grass by controlled acid hydrolysis
Amiralian, N., Annamalai, P. K., Garvey, C. J., Jiang, E., Memmott, P. C., & Martin, D. J. (2017) · Cellulose · doi:10.1007/s10570-017-1379-6 · Cited by 48
“Most of these studies have focused on measuring elastic modulus along the axial direction of the fibre (Cheng andWang 2008; Guhados et al. 2005; Iwamoto et al. 2009; Lahiji et al. 2010; Tanaka and Iwata 2006; Tashiro and Kobayashi 1991), and only a few reports have concentrated on the transverse…”
BackgroundBai, H., Liang, Z., Wang, D., Guo, J., Zhang, S., Ma, P., & Dong, W. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108338 · Cited by 48
Chyasnavichyus, M., Young, S. L., & Tsukruk, V. V. (2015) · Japanese Journal of Applied Physics · doi:10.7567/jjap.54.08la02 · Cited by 48
High-performance cellulose nanofibril composite films
Qing, Y., Sabo, R. C., Wu, Y., & Cai, Z. (2012) · BioResources · doi:10.15376/biores.7.3.3064-3075 · Cited by 48
“…(PVA), amylopectin, chitosan, and aqueous urea formaldehyde, but also in hydrophobic substrates like polylactic acid (PLA) and polypropylene (PP) (Dufresne and Vignon 1998; Lu et al. 2008; Plackett et al. 20 10; Fernandes et al. 20 10; Veigel et al. 2011; Iwatake et al. 2008; Cheng et al. 2007).”
BackgroundAndersson, R. L., Ström, V., Gedde, U. W., Mallon, P. E., Hedenqvist, M. S., & Olsson, R. T. (2014) · Scientific Reports · doi:10.1038/srep06335 · Cited by 46
Funahashi, R., Okita, Y., Hondo, H., Zhao, M., Saito, T., & Isogai, A. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b01173 · Cited by 47
Self-citationAlizadehgiashi, M., Khabibullin, A., Li, Y., Prince, E., Abolhasani, M., & Kumacheva, E. (2017) · Langmuir · doi:10.1021/acs.langmuir.7b03648 · Cited by 46
Zhai, L., Kim, H. C., Kim, J. W., Kang, J., & Kim, J. (2018) · Cellulose · doi:10.1007/s10570-018-1836-x · Cited by 47
“According to previous studies of the AFM TPB test for cellulose nanofiber, cellulose nanofiber was assumed to be a perfect circular shape (Cheng et al. 2009; Iwamoto et al. 2009), meanwhile cellulose nanofiber was assumed to be an elliptical shape (Guhados et al. 2005; Burnham and Colton 1989).”
ResultInfluentialWet spinning of cellulose nanowhiskers; fiber yarns obtained only from colloidal cellulose crystals
Araki, J., & Miyayama, M. (2019) · Polymer · doi:10.1016/j.polymer.2019.122116 · Cited by 48
Yin, Y., Lucia, L. A., Pal, L., Jiang, X., & Hubbe, M. A. (2020) · Cellulose · doi:10.1007/s10570-020-03225-3 · Cited by 46
Reyes, G., Ajdary, R., Yazdani, M. R., & Rojas, O. J. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c00177 · Cited by 46
Modelling cell wall growth using a fibre-reinforced hyperelastic–viscoplastic constitutive law
Huang, R., Becker, A. A., & Jones, I. A. (2011) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2011.12.003 · Cited by 49
Linear, non-linear and plastic bending deformation of cellulose nanocrystals
Chen, P., Ogawa, Y., Nishiyama, Y., Ismail, A. E., & Mazeau, K. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp00624h · Cited by 45
Nemazifard, M., Kavoosi, G., Marzban, Z., & Ezedi, N. (2016) · International Journal of Food Properties · doi:10.1080/10942912.2016.1219369 · Cited by 45
Xi, P., Quan, F., Sun, Y., & Jiang, Y. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110078 · Cited by 45
Nano-dispersion of TEMPO-oxidized cellulose/aliphatic amine salts in isopropyl alcohol
Fujisawa, S., Saito, T., & Isogai, A. (2011) · Cellulose · doi:10.1007/s10570-011-9648-2 · Cited by 52
“2010), high elastic moduli (Nishino et al. 1995; Iwamoto et al. 2009) and low thermal expansion coefficients (Yano et al.”
BackgroundSelf-citationKönigsberger, M., Lukacevic, M., & Füssl, J. (2023) · Materials and Structures · doi:10.1617/s11527-022-02097-2 · Cited by 51
“Crystalline Ib cellulose, the dominant polymorph for plants [14], has been studied experimentally by means of X-ray scattering [36–38] and atomic force microscopy [39], as well as numerically by means of”
MethodChanthathamrongsiri, N., Petchsomrit, A., Leelakanok, N., Siranonthana, N., & Sirirak, T. (2021) · Heliyon · doi:10.1016/j.heliyon.2021.e07819 · Cited by 44
Resin impregnation of cellulose nanofibril films facilitated by water swelling
Qing, Y., Sabo, R. C., Cai, Z., & Wu, Y. (2012) · Cellulose · doi:10.1007/s10570-012-9815-0 · Cited by 45
“Nakagaito and Yano (2005) reported that layered CNF/PF composites had mechanical properties similar to magnesium alloy with a bending strength and Young’s modulus of 370 MPa and 16 GPa, respectively.”
BackgroundLiu, X., Qi, X., Guan, Y., He, Y., Li, S., Liu, H., Zhou, L., Wei, C. Y., Yu, C., & Chen, Y. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115202 · Cited by 43
Assembly of Anisotropic Nanocellulose Films Stronger than the Original Tree
Merindol, R., Diabang, S., Mujica, R., Houérou, V. L., Roland, T., Gauthier, C., Decher, G., & Félix, O. (2020) · ACS Nano · doi:10.1021/acsnano.0c01372 · Cited by 43
Effect of inter-fibre bonding on the fracture of fibrous networks with strong interactions
Goutianos, S., Mao, R., & Peijs, T. (2017) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2017.12.020 · Cited by 43
“Iwamoto et al. (2009) measured in three-point bending, using Atomic Force Microscopy, the Young’s modulus of single microfibrils of tunicate cellulose between 114 GPa and 180 GPa.”
MethodZhu, X., Li, Y., Yu, T., & Zhang, Z. (2021) · Composites Communications · doi:10.1016/j.coco.2021.100940 · Cited by 42
Probing elastic properties of soft materials with AFM: Data analysis for different tip geometries
Chyasnavichyus, M., Young, S. L., Geryak, R. D., & Tsukruk, V. V. (2016) · Polymer · doi:10.1016/j.polymer.2016.02.020 · Cited by 42
Carbon nanotubes enhanced cellulose nanocrystals films with tailorable electrical conductivity
Meng, Q., & Manas‐Zloczower, I. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.10.008 · Cited by 41
Shi, Z., Xu, H., Yang, Q., Xiong, C., Zhao, M., Kobayashi, K., Saito, T., & Isogai, A. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115215 · Cited by 41
Self-citationMolecular deformation mechanisms in cellulose allomorphs and the role of hydrogen bonds
Djahedi, C., Berglund, L. A., & Wohlert, J. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.04.073 · Cited by 41
Chen, A., Mu, W., & Chen, Y. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.11.100 · Cited by 41
Microstructured Al/Fe2O3/Nitrocellulose Energetic Fibers Realized by Electrospinning
Li, R., Xu, H., Hu, H., Yang, G., Wang, J., & Shen, J. (2013) · Journal of Energetic Materials · doi:10.1080/07370652.2012.754515 · Cited by 42
Cellulose Nanocrystals: A Potential Nanofiller for Food Packaging Applications
Dhar, P., Bhardwaj, U., Kumar, A., & Katiyar, V. (2014) · ACS symposium series · doi:10.1021/bk-2014-1162.ch017 · Cited by 46
Prakobna, K., Kisonen, V., Xu, C., & Berglund, L. A. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9299-z · Cited by 44
Metadata
- Authors
- Iwamoto, S., Kai, W., Isogai, A., & Iwata, T.
- Affiliations
- The University of Tokyo (JP)
- Corresponding author
- Iwata, Tadahisa
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-07-31
- Volume
- 10
- Issue
- 9
- Pages
- 2571-2576
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1972994476
- Cited by
- 754
- References
- 40
- Citations by year
- 2026: 27 · 2025: 30 · 2024: 29 · 2023: 45 · 2022: 67 · 2021: 53 · 2020: 58 · 2019: 59 · 2018: 54 · 2017: 60 · 2016: 51 · 2015: 43 · 2014: 52 · 2013: 47 · 2012: 33
- FWCI
- 11.56
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Japan Society for the Promotion of Science (21228007)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Force Microscopy Techniques and Applications
- Keywords
- cellulose microfibrils, tunicate cellulose, elastic modulus, nanocellulose, TEMPO-oxidized cellulose, sulfuric acid hydrolysis, three-point bending, crystalline cellulose
- MeSH terms
- Animals, Cellulose, Hydrolysis, Urochordata, Microscopy, Atomic Force, Microfibrils, Elastic Modulus
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.