Elastic Modulus of Single Cellulose Microfibrils from Tunicate Measured by Atomic Force Microscopy
The DOI matches its Crossref record; 39 of the 40 references it cites were found in a registry or an index.
Abstract
The elastic modulus of single microfibrils from tunicate ( Halocynthia papillosa ) cellulose was measured by atomic force microscopy (AFM). Microfibrils with cross-sectional dimensions 8 x 20 nm and several micrometers in length were obtained by oxidation of cellulose with 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) as a catalyst and subsequent mechanical disintegration in water and by sulfuric acid hydrolysis. The nanocellulosic materials were deposited on a specially designed silicon wafer with grooves 227 nm in width, and a three-point bending test was applied to determine the elastic modulus using an AFM cantilever. The elastic moduli of single microfibrils prepared by TEMPO-oxidation and acid hydrolysis were 145.2 +/- 31.3 and 150.7 +/- 28.8 GPa, respectively. The result showed that the experimentally determined modulus of the highly crystalline tunicate microfibrils was in agreement with the elastic modulus of native cellulose crystals.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They proposed a value of 145.2 ± 31.3 GPa for microfibrils prepared by TEMPOoxidation and 150.7 ± 28.8 GPa for microfibrils produced by acid hydrolysis [81].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [81]
Citations
Cites
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
Calibration of atomic-force microscope tips
Hutter, J. L., & Bechhoefer, J. (1993) · Review of Scientific Instruments · doi:10.1063/1.1143970 · Cited by 4,194
Nishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493
Self-citationAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Self-citationCellulose: the structure slowly unravels
O'SULLIVAN, A. C. (1997) · Cellulose · doi:10.1023/a:1018431705579 · Cited by 1,499
Elastic and Shear Moduli of Single-Walled Carbon Nanotube Ropes
Salvetat, J.-P., Briggs, G., Bonard, J.-M., Bacsa, R., Kulik, A., Stöckli, T., Burnham, N., & Forró, L. (1999) · Physical Review Letters · doi:10.1103/physrevlett.82.944 · Cited by 1,488
Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation
Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., & Isogai, A. (2009) · Biomacromolecules · doi:10.1021/bm801065u · Cited by 1,271
Self-citationElazzouzi-Hafraoui, S., Nishiyama, Y., Putaux, J.-L., Heux, L., Dubreuil, F., & Rochas, C. (2008) · Biomacromolecules · doi:10.1021/bm700769p · Cited by 1,182
Research works printed but not linked: 3
- Turbak A. F., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 815
- Herrick F. W., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 797
- Xu W., 1994, Scanning Microsc., 8, 499
Cited by
Items 601–700 of 779
Prediction of elastic modulus of cellulose nanofiber using density functional theory
Li, Z., Guan, Y., Hu, N., & Song, J. (2025) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2025.131514 · Cited by 3
A hybrid cellulose nano-crystals cyanobacterial living material improves soil crust rehabilitation
Belsey, S., Shoseyov, O., Zer, H., Yochelis, S., Paltiel, Y., Keren, N., & Shoseyov, O. (2025) · Environmental Technology & Innovation · doi:10.1016/j.eti.2025.104501 · Cited by 3
Integrating complete bond dissociation in Class II force fields
Kemppainen, J., Heinz, H., & Odegard, G. M. (2025) · npj Computational Materials · doi:10.1038/s41524-025-01838-5 · Cited by 3
“Thisenergyreleasegeneratesa discontinuity intheenergy landscape, which causestheassociatedatomstogeneratelargervelocities,resultingintheMD 44 (from an MD study), Cellulose I β 70,71 , PAN 9 (from an MD study), and SWCNT 72 .”
Reversible Surface Functionalization of Cellulose Nanocrystals Mediated by Metal-Phenolic Networks
Yamada, E., Brändli, C., & Ejima, H. (2026) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c10711 · Cited by 3
Cellulose Nanofibers and their Nanocomposites
Yano, H., & Abe, K. (2014) · Journal of the Japan Society for Technology of Plasticity · doi:10.9773/sosei.55.112 · Cited by 3
Soliman, M., & Tétard, L. (2017) · MRS Advances · doi:10.1557/adv.2017.78 · Cited by 3
A Potency of Microcellulose from Pineapple Leave Isolated by Hydrolysis-Assisted Sonication
Latif, L. K., Masruri, M., & Rumhayati, B. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/833/1/012020 · Cited by 3
Growth spin in plant cell wall growth and remodelling
Huang, R. (2022) · Mathematics and Mechanics of Solids · doi:10.1177/10812865221111088 · Cited by 3
“Microfibrils, several nanometres in width and many micrometres long, have a tensile strength similar to that of steel, and are relatively inert and inextensible in growth [7,8].”
BackgroundPercolative dielectric behavior of titanium carbide MXene/cellulose nanofibrils composite films
Jurečič, V., Lakshmanan, S., Novak, N., Kokol, V., & Bobnar, V. (2024) · APL Materials · doi:10.1063/5.0232250 · Cited by 3
Liu, G. T., Shi, S.-C., & Rahmadiawan, D. (2024) · Jurnal Pendidikan Teknologi Kejuruan · doi:10.24036/jptk.v7i4.39823 · Cited by 3
Cellulose: structure and beneficial functions in the human digestive tract
Fontes‐Candia, C., Benito‐González, I., & Martínez‐Sanz, M. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-15700-4.00010-9 · Cited by 3
Cellulose Nanocrystals: Nanostrength for Industrial and Biomedical Applications
Kumar, A., & Negi, Y. S. (2014) · Wiley eBooks · doi:10.1002/9781118872246.ch15 · Cited by 5
Polymer Nanofibers Reinforced with Cellulose Nanocrystals
Dong, H. (2014) · Springer eBooks · doi:10.1007/978-3-642-45232-1_66 · Cited by 3
Bajpai, P. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-811101-7.00004-6 · Cited by 3
Cellulose Nanocrystals: Particles and Polymer Nanocomposites
Abdallah, W., & Kamal, M. R. (2019) · Carl Hanser Verlag GmbH & Co. KG eBooks · doi:10.3139/9781569906361.014 · Cited by 3
Microbial cellulose: biosynthesis and textile applications
Quintana-Quirino, M., Vigueras-Ramírez, G., Alonso-Segura, D., & Shirai, K. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821483-1.00023-1 · Cited by 3
Ultrasonic properties of amorphous TEMPO-oxidized cellulose nanofibers
Fukuhara, M., Hasegawa, F., & Hashida, T. (2021) · MRS Communications · doi:10.1557/s43579-021-00036-w · Cited by 3
Danial, W. H., Taib, R. M., Samah, M. A. A., & Majid, Z. A. (2022) · Springer eBooks · doi:10.1007/978-3-030-93932-8_7 · Cited by 3
Han, X., Li, Q., Quan, K., Chai, C., & Chen, P. (2023) · Crystal Growth & Design · doi:10.1021/acs.cgd.3c00084 · Cited by 3
Cellulose Nanofibers as New Bio-Based Nanomaterials
Isogai, A. (2016) · Springer eBooks · doi:10.1007/978-4-431-55203-1_18 · Cited by 3
“Once completely individual TOCNs without any agglomeration in water are obtained, tensile strengths and Young’s modulus of single TOCN elements are measurable using cavitation forces during ultrasonic treatments and stress-train curves obtained using cantilevers in atomic force microscopy (AFM) analysis, respectively…”
MethodSelf-citationSynthesis of triazine derivative and its application in the modification of cellulose nanocrystals
Yin, Y., Zhao, L.-N., Jiang, X., Wang, H., & Gao, W. (2017) · BioResources · doi:10.15376/biores.12.4.7427-7438 · Cited by 3
Discontinuous Finite Element Model of Hydrogels
Gao, X., Sözümert, E., & Silberschmidt, V. V. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-811718-7.00001-0 · Cited by 3
Nanocellulose‐Based Composites in Biomedical Applications
Osorio, M., Cañas, A. I., Zuluaga, R., Gañán, P. F., Ortiz, I. C., & Castro, C. I. (2018) · Wiley eBooks · doi:10.1002/9781119323327.ch13 · Cited by 3
Khili, F., & Dakhlaoui, A. (2019) · European Journal of Chemistry · doi:10.5155/eurjchem.10.1.19-25.1789 · Cited by 3
Inherently Distinctive Potentialities and Uses of Nanocellulose Based on its Nanoarchitecture
Uetani, K., Ranaivoarimanana, N. J., Hatakeyama, M., & Kitaoka, T. (2021) · BioResources · doi:10.15376/biores.16.2.uetani · Cited by 3
“The assembly design to stack crystalline nanocellulose having a modulus of 140 to 150 GPa (Iwamoto et al. 2009), a strength of 2 to 6 GPa (Saito et al. 2013), a very low coefficient of thermal expansion (Hori and Wada 2005), a relatively high optical birefringence of up to 0.09 (Uetani et al. 2019), and high electrica…”
BackgroundInfluentialA Comparative Study of Cellulose Nanocomposite Derived from Algae and Bacteria and Its Applications
Hamouda, R. A., & Abdel‐Hamid, M. S. (2022) · Engineering materials · doi:10.1007/978-3-030-94319-6_7 · Cited by 7
Measuring the Elasticity of Poly‐ l ‐Proline Helices with Terahertz Spectroscopy
Ruggiero, M. T., Šibík, J., Orlando, R., Zeitler, J. A., & Korter, T. M. (2016) · Angewandte Chemie · doi:10.1002/ange.201602268 · Cited by 3
Hirase, R., & Yuguchi, Y. (2022) · Journal of Fiber Science and Technology · doi:10.2115/fiberst.2022-0010 · Cited by 3
Jonasson, S., Bünder, A., Berglund, L., Niittylä, T., & Oksman, K. (2022) · Nanomaterials · doi:10.3390/nano12193448 · Cited by 3
“CMFs that have been subjected to isolation and purification processes are referred to as cellulose nanofibrils (CNFs) and inherit many of their distinct properties, including high tensile strength [5], stiffness [6], and aspect ratio [7] and a low coefficient of thermal expansion [8].”
BackgroundNanocellulose extraction and surface modification toward active packaging applications
Wu, Y. (. S. I. B. E. (2017) · MOspace Institutional Repository (University of Missouri) · doi:10.32469/10355/63577 · Cited by 4
Enhance The Properties of Cellulose Fracturing Fluids By Cellulose NanocrystalsPreprint
Wang, S., Hu, P., Li, S., Yi, H., Shi, P., & Wang, Z. (2021) · Research Square · doi:10.21203/rs.3.rs-474137/v1 · Cited by 3
Modification chimique de surface de NanoFibrilles de Cellulose (NFC)
Missoum, K. (2012) · theses.fr (ABES) · doi:10.70675/67037659z43e2z4708z8815zf3832ec31b6d · Cited by 10
“4 (Iwamoto et al. 2009) Soft /Hardwood pulp bleached Kraft pulp 222-233 6.”
BackgroundInfluentialPolymer Nanocomposite Matrix-Based Nanoproducts
AI-Jawhari, I. F. H. (2022) · Springer eBooks · doi:10.1007/978-981-16-8698-6_21 · Cited by 2
Cellulose Nanofibrils Composite Films
Jiang, H., Snider, H., Zhao, X., Pethe, S. P., De, S., Aytuğ, T., Ozcan, S., Nawaz, K., & Li, K. (2024) · Advances in chemical and materials engineering book series · doi:10.4018/979-8-3693-0003-9.ch004 · Cited by 2
Kim, Y.-O., Jung, Y., & Choi, J. (2025) · Polymer · doi:10.1016/j.polymer.2025.128559 · Cited by 2
Wang, S., Ross, I. L., Leong, K. K., Xu, Y., Stokes, J. R., Hankamer, B. D., & Amiralian, N. (2026) · ACS Sustainable Resource Management · doi:10.1021/acssusresmgt.5c00520 · Cited by 2
Yeh, L., Chen, H., Zhu, X., She, X., & Sue, H. (2026) · Cellulose · doi:10.1007/s10570-026-07058-4 · Cited by 2
“…of biomass-derived nanomaterial composed of crystal-line and amorphous components, possess exceptional properties including high biocompatibility, impressive elastic modulus (Iwamoto et al. 2009), remarkable strength (Saito et al. 2013), and low thermal expansion coefficient (Hori and Wada 2005).”
Cellulose Nanofibers Prepared from Wood Pulps, Their Characteristics and Potential Applications
Isogai, A. (2013) · JAPAN TAPPI JOURNAL · doi:10.2524/jtappij.67.654 · Cited by 2
Self-citationRecent Advances in Green Sustainable Nanocellulosic Fiber: An Overview
Mishra, D., Shanker, K., & Khare, P. (2017) · Springer eBooks · doi:10.1007/978-3-319-50654-8_13 · Cited by 2
Controlling porosity and density of nanocellulose aerogels for superhydrophobic light materials
Yu, C., Wang, F., Fu, S., & Lucia, L. A. (2018) · TAPPI Journal · doi:10.32964/tj17.03.145 · Cited by 2
Nanocellulose in packaging industry
Trivedi, R., & Prajapati, P. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823963-6.00012-0 · Cited by 2
Understanding how the substituents of polysaccharides influence physical properties
Aggarwal, S., Koser, K., Chakravarty, A., & Ikram, S. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823439-6.00009-x · Cited by 2
Appidi, T., Sushma, M. V., & Rengan, A. K. (2021) · Springer eBooks · doi:10.1007/978-3-030-62976-2_12-1 · Cited by 2
Restu, W. K., Ghozali, M., Triwulandari, E., Sampora, Y., Septiyanti, M., Meliana, Y., Ndruru, S. T. C. L., Sofyan, M. I., Masruchin, N., & Marlina, A. (2023) · Physical Sciences Reviews · doi:10.1515/psr-2022-0180 · Cited by 4
The use of TEMPO-oxidized nanofibrillated cellulose as anode binder for lithium-ion batteries
Kwon, S., Moon, J., Kim, S., & Oh, K. (2025) · BioResources · doi:10.15376/biores.20.2.3732-3748 · Cited by 2
“NFC generally exhibits high moduli and superior mechanical properties (Iwamoto et al .”
Seo, E. J., Kim, K.-J., & Lee, J. M. (2020) · Journal of Korea Technical Association of The Pulp and Paper Industry · doi:10.7584/jktappi.2020.02.52.1.11 · Cited by 2
Ressouche, E., Molina-Boisseau, S., Mazeau, K., Guérin, D., Schelcher, M., & Heux, L. (2020) · Cellulose · doi:10.1007/s10570-020-03319-y · Cited by 2
“2013) and high elastic modulus (115–150 GPa) (Iwamoto et al. 2009; Nishiyama 2009).”
BackgroundInfluentialPreparation and Chemical/Physical Characterization of Individual Nanoscaled Fibrils
Subramani, R., Senthilkumar, P., Chandran, S., Kartsev, A., Григорьевич, Ш. В., & Lega, P. V. (2022) · Nanoscience & Nanotechnology-Asia · doi:10.2174/2210681212666220217121830 · Cited by 2
Anjumol, K. S. (2021) · Journal of Siberian Federal University Biology · doi:10.17516/1997-1389-0366 · Cited by 3
“Nanocellulose has gained increasing interest for a wide range of applications in different fields of engineering due to its renewability, anisotropic nature, excellent mechanical properties, good biocompatibility, tailorable surface chemistry, and interesting optical properties (Iwamoto et al., 2009; Joseph et al., 20…”
BackgroundFukuda, J., & Hsieh, Y. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c07030 · Cited by 2
Advances in the Production of Cellulose Nanomaterials and Their Use in Engineering (Bio)Plastics
Banvillet, G., Bugaut, M., Doineau, E., Taguet, A., Moigne, N. L., & Rojas, O. J. (2023) · Composites science and technology · doi:10.1007/978-981-99-2473-8_12 · Cited by 2
Sources and Applications of Nano Cellulose Tailored Materials
Kirtania, M. D., Chakraborty, S., Barik, A., & Dey, S. (2024) · Nanotechnology and nanomaterials. · doi:10.5772/intechopen.113935 · Cited by 5
Correia, V. D. C. (2015) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/t.74.2015.tde-04092015-104346 · Cited by 9
Liebner, F. W., Pircher, N., Schimper, C. B., Haimer, E., & Rosenau, T. (2017) · CRC Press eBooks · doi:10.1081/e-ebppc-120051062 · Cited by 2
Graphene based Composites with Cellulose Nanofibrils for Energy storage applications
Pottathara, Y. B. (2017) · theses.fr (ABES) · doi:10.70675/aeca72c8z6b8fz4204zb177zdefd40d59b53 · Cited by 2
Jan, K. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-822906-4.00005-0 · Cited by 1
Piezoelectric Polymer Blends Interfacing Biomedical Technologies
Panfilo, A., Montilla, A., Schönlein, R., Larrañaga, A., & Ugartemendia, J. M. (2025) · Engineering materials · doi:10.1007/978-3-031-88736-9_7 · Cited by 1
Bonilla, M. R., Kannam, S. K., Downton, M. T., Doblin, M. S., Bacic, A., Gidley, M. J., & Stokes, J. R. (2025) · Soft Matter · doi:10.1039/d4sm01488j · Cited by 1
Dong, X. G. (2026) · Journal of Molecular Modeling · doi:10.1007/s00894-026-06909-y · Cited by 1
“When a trainingloopwascompleted,theinformationoftheagentwas saved and loaded for subsequent trainings.”
Advances in rheological and colloidal behavior of cellulose-based materials
Tom, C., Pathak, S. K., & Pujala, R. K. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29131-9.00006-2 · Cited by 1
Nanocellulose for Sustainable Water Purification
Chen, R., Xu, P., Wang, L., Gao, F., & Zhang, Q. (2026) · Advanced structured materials · doi:10.1007/978-3-032-10749-7_3 · Cited by 1
Advancing cellulose nanofiber filament technology: Thermal drying effects on strength and morphology
Wang, M.-R., Verma, C., Johnson, C. M., Söderberg, L. D., & Gordeyeva, K. S. (2026) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2026.124894 · Cited by 1
Jiang, K., & Duan, B. (2026) · Small · doi:10.1002/smll.202513175 · Cited by 1
Wang, G., Su, D., Zexi, L. I., Deng, J., Wang, Y., Tang, C., Yang, C., & Liu, J. (2026) · Journal of Applied Physics · doi:10.1063/5.0314845 · Cited by 1
Nwaiwu, D. H., Lin, D., Wei, X., & Liu, F. (2026) · Materials · doi:10.3390/ma19081598 · Cited by 1
Ito, Y., Kanai, N., & Kawamura, I. (2026) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6c00477 · Cited by 1
Celada, L. M., & Olsén, P. (2026) · Journal of Materials Chemistry A · doi:10.1039/d6ta02233b · Cited by 2
Yu, Y., Rukmani, S. J., Wan, Z., Copenhaver, K., Goswami, M., Li, K., Ozcan, S., Rojas, O. J., & Smith, J. C. (2026) · ACS Nano · doi:10.1021/acsnano.6c06855 · Cited by 1
Fadly, M. S., Kusmono, Wildan, M. W., Ariawan, D., Widodo, T. D., & Wahyudi, K. (2026) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2026.08.160 · Cited by 2
Pretreatment of Cellulose for Further Processing
Isogai, A. (2014) · Materials and Energy/Materials and energy · doi:10.1142/9789814566469_0004 · Cited by 1
Self-citationSilvia, B. M., Bastiurea, M., Dima, D., Murarescu, M., & Andrei, G. (2015) · Cited by 1
Raw Materials for Production of Nanocellulose
Bajpai, P. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-811101-7.00002-2 · Cited by 1
6.12 Hierarchical Nanocomposites/Multi-Scale Composites
Rider, A. N. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.10016-5 · Cited by 1
Lin, J., Lin, J., Miao, X., Zhang, X., & Bian, F. (2017) · Wiley eBooks · doi:10.1002/9781119441632.ch151 · Cited by 2
Sustainable Organic–Inorganic Interfaces in Energy Applications
Guterman, R., Yuan, J., Sobhana, L., Fardim, P., Mayo, S. G., & Salazar‐Alvarez, G. (2017) · Wiley eBooks · doi:10.1002/9783527807130.ch5 · Cited by 1
Nanocellulose-Reinforced Unsaturated Polyester Composites
Chirayil, C. J., George, C., Hosur, M. V., & Thomas, S. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816129-6.00012-0 · Cited by 2
Review on the Preparation of Cellulose Nanofibers
Abe, K. (2019) · Journal of The Adhesion Society of Japan · doi:10.11618/adhesion.55.296 · Cited by 1
A New Method to Obtain Cellulose Nanofiber from Wood
Sánchez, M. Á. G., Spinoza, J. A., & de Miranda, L. F. (2020) · The minerals, metals & materials series · doi:10.1007/978-3-030-36628-5_37 · Cited by 1
Lignocellulosics as a Green Material Opportunity for Energy Storage Systems
Kim, J., Lee, D., & Lee, S. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-804077-5.00016-6 · Cited by 1
Anisotropic Nanofillers in TPE
Bandyopadhyay, A., Dasgupta, P., & Basak, S. (2020) · Engineering materials · doi:10.1007/978-981-15-9085-6_2 · Cited by 1
Polymer Nanocomposite Matrix-Based Nanoproducts
AI-Jawhari, I. F. H. (2021) · Springer eBooks · doi:10.1007/978-981-15-6453-6_21-1 · Cited by 2
Results of the Nano Cellulose Vehicle Project
Usuki, A. (2021) · Journal of the Japan Society of Colour Material · doi:10.4011/shikizai.94.169 · Cited by 1
Advanced Nanocellulose-Based Materials: Production, Properties and Applications
Vilela, C., & Freire, C. S. R. (2022) · MDPI eBooks · doi:10.3390/books978-3-0365-3190-8 · Cited by 1
STRUCTURE OF CELLULOSE AND ITS USE; A REVIEW
Nisa’, L. L. A., Aritonang, S., Manawan, M. T. E., & Sudiro, T. (2022) · International Journal of Education and Social Science Research · doi:10.37500/ijessr.2022.5205 · Cited by 1
“In addition, there is another method, namely the atomic force microscopy method, in this method the test object is placed on a specimen holder which has a basin width of 227 nm, which will then be subjected to a pressure test [30].”
MethodTrial Production Using Cellulose Nanofibers
Usuki, A. (2022) · NIPPON GOMU KYOKAISHI · doi:10.2324/gomu.95.153 · Cited by 1
Mosquito bite prevention through self-assembled cellulose nanocrystals
Voignac, D., Sar-Shalom, E., Paltiel, Y., Shoseyov, O., & Bohbot, J. D. (2023) · PNAS Nexus · doi:10.1093/pnasnexus/pgad069 · Cited by 1
Niu, Y., Fu, X. J., Zhu, Y., Meng, F., Ma, Q., Song, C., Zhang, Q., & Che, Y. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c00178 · Cited by 1
Molecular Surface Doping of Cellulose Nanocrystals: A High-Throughput Computational Study
Lee, J., Lee, B., Park, N., Park, J., & Kang, J. (2024) · Chemistry of Materials · doi:10.1021/acs.chemmater.4c02045 · Cited by 1
Thermoforming nanoparticle aggregates via interfacial ionic self-diffusion
Ishioka, S., Hiromatsu, Y., Peng, J., Kabe, T., Kasuga, T., Daicho, K., Goi, Y., Isobe, N., Yamaguchi, T., Fujisawa, S., et al. (2026) · Science Advances · doi:10.1126/sciadv.aeb3281 · Cited by 1
“…have excellent mechanical and thermal properties, such as a high stiffness (30 to 90 GPa), high strength (2 to 3 GPa), and a low coefficient of thermal expansion (CTE) [6 parts per million (ppm) K − 1 ] ( 5 – 7 , 21 ), but they also do not exhibit thermo-plasticity, similar to other nanoparticles.”
Self-citationElasticity of Cellulose Nanofibril Materials
Josefsson, G. (2015) · DiVA (Digitala Vetenskapliga Arkivet) · Cited by 3
Nanomechanics of cellulose crystals and cellulose-based polymer composites
Pakzad, A. (2011) · Digital Commons - Michigan Tech (Michigan Technological University) · doi:10.37099/mtu.dc.etds/393 · Cited by 1
Nanocelluloses as potential materials for specialty papers
Bardet, R. (2014) · theses.fr (ABES) · doi:10.70675/11e9c091z8f31z4faazb145z7882f8f65e8b · Cited by 5
Estudo de nanocompósitos formados por PLA e nanopartículas de celulose.
Bartolomei, S. S. (2016) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/d.3.2016.tde-04072016-152946 · Cited by 3
Nanocellulose based materials for Cell Culture
Smyth, M. (2017) · theses.fr (ABES) · doi:10.70675/7f9368f5zece3z448bzae8dz8cd541137802 · Cited by 4
Cellulose Nanocrystals – Fascinating Materials from Nature
MacLachlan, M. J. (2019) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2019.100773 · Cited by 1
Polymer–Nanocomposite Membranes for Water Separations
de Lannoy, C. (2019) · Wiley eBooks · doi:10.1002/9781119300762.wsts0029 · Cited by 1
Morel, A. (2019) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-b-000404888 · Cited by 1
Isogai, A. (2014) · Springer eBooks · doi:10.1007/978-3-642-36199-9_320-1 · Cited by 1
Self-citationGassiot-Talabot, A. (2015) · theses.fr (ABES) · doi:10.70675/e76aded9zacc1z4af8zaec7z7705d3c846b8 · Cited by 2
Interaction of plant cell wall building blocks : towards a bioinspired model system
Navon, Y. (2020) · theses.fr (ABES) · doi:10.70675/dbd0009cz1c1az4e22z9e72z99a040bc9a62 · Cited by 1
Metadata
- Authors
- Iwamoto, S., Kai, W., Isogai, A., & Iwata, T.
- Affiliations
- The University of Tokyo (JP)
- Corresponding author
- Iwata, Tadahisa
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-07-31
- Volume
- 10
- Issue
- 9
- Pages
- 2571-2576
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1972994476
- Cited by
- 754
- References
- 40
- Citations by year
- 2026: 27 · 2025: 30 · 2024: 29 · 2023: 45 · 2022: 67 · 2021: 53 · 2020: 58 · 2019: 59 · 2018: 54 · 2017: 60 · 2016: 51 · 2015: 43 · 2014: 52 · 2013: 47 · 2012: 33
- FWCI
- 11.56
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Japan Society for the Promotion of Science (21228007)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Force Microscopy Techniques and Applications
- Keywords
- cellulose microfibrils, tunicate cellulose, elastic modulus, nanocellulose, TEMPO-oxidized cellulose, sulfuric acid hydrolysis, three-point bending, crystalline cellulose
- MeSH terms
- Animals, Cellulose, Hydrolysis, Urochordata, Microscopy, Atomic Force, Microfibrils, Elastic Modulus
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.