Elastic Modulus of Single Cellulose Microfibrils from Tunicate Measured by Atomic Force Microscopy
The DOI matches its Crossref record; 39 of the 40 references it cites were found in a registry or an index.
Abstract
The elastic modulus of single microfibrils from tunicate ( Halocynthia papillosa ) cellulose was measured by atomic force microscopy (AFM). Microfibrils with cross-sectional dimensions 8 x 20 nm and several micrometers in length were obtained by oxidation of cellulose with 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) as a catalyst and subsequent mechanical disintegration in water and by sulfuric acid hydrolysis. The nanocellulosic materials were deposited on a specially designed silicon wafer with grooves 227 nm in width, and a three-point bending test was applied to determine the elastic modulus using an AFM cantilever. The elastic moduli of single microfibrils prepared by TEMPO-oxidation and acid hydrolysis were 145.2 +/- 31.3 and 150.7 +/- 28.8 GPa, respectively. The result showed that the experimentally determined modulus of the highly crystalline tunicate microfibrils was in agreement with the elastic modulus of native cellulose crystals.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They proposed a value of 145.2 ± 31.3 GPa for microfibrils prepared by TEMPOoxidation and 150.7 ± 28.8 GPa for microfibrils produced by acid hydrolysis [81].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [81]
Citations
Cites
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
Calibration of atomic-force microscope tips
Hutter, J. L., & Bechhoefer, J. (1993) · Review of Scientific Instruments · doi:10.1063/1.1143970 · Cited by 4,194
Nishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493
Self-citationAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Self-citationCellulose: the structure slowly unravels
O'SULLIVAN, A. C. (1997) · Cellulose · doi:10.1023/a:1018431705579 · Cited by 1,499
Elastic and Shear Moduli of Single-Walled Carbon Nanotube Ropes
Salvetat, J.-P., Briggs, G., Bonard, J.-M., Bacsa, R., Kulik, A., Stöckli, T., Burnham, N., & Forró, L. (1999) · Physical Review Letters · doi:10.1103/physrevlett.82.944 · Cited by 1,488
Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation
Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., & Isogai, A. (2009) · Biomacromolecules · doi:10.1021/bm801065u · Cited by 1,271
Self-citationElazzouzi-Hafraoui, S., Nishiyama, Y., Putaux, J.-L., Heux, L., Dubreuil, F., & Rochas, C. (2008) · Biomacromolecules · doi:10.1021/bm700769p · Cited by 1,182
Research works printed but not linked: 3
- Turbak A. F., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 815
- Herrick F. W., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 797
- Xu W., 1994, Scanning Microsc., 8, 499
Cited by
Items 501–600 of 779
Uetani, K., Izakura, S., Koga, H., & Nogi, M. (2020) · Nanoscale Advances · doi:10.1039/c9na00734b · Cited by 10
Biobased Electronics: Tunable Dielectric and Piezoelectric Cellulose Nanocrystal—Protein Films
Voignac, D., Belsey, S., Wermter, E., Paltiel, Y., & Shoseyov, O. (2023) · Nanomaterials · doi:10.3390/nano13152258 · Cited by 10
Atifi, S., Mirvakili, M., & Hamad, W. Y. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c00636 · Cited by 11
Experimental characterisation of nanofibrillated cellulose foams
Srinivasa, P., Kulachenko, A., & Aulin, C. (2015) · Cellulose · doi:10.1007/s10570-015-0753-5 · Cited by 10
“NFC belongs to a unique class of nanomaterials with high stiffness in the range of 29–145 GPa, (Iwamoto et al. 2009; Tanpichai et al. 2012), lightweight properties (density ca. 1.5 g/cm3) and based on the drying methods, specific surface area as high as 482 m2/g, (Sehaqui et al. 2011b), which makes these nanofibrils i…”
BackgroundMethodInfluentialTercjak, A., Gutierrez, J., Mondragón, G., & Mondragòn, I. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp2054958 · Cited by 10
Liebner, F. W., Pircher, N., Schimper, C. B., Haimer, E., & Rosenau, T. (2016) · Taylor & Francis eBooks · doi:10.1081/e-ebpp-120051062 · Cited by 11
Multiscale micromechanics modeling of viscoelastic natural plant fibers
Li, J., Wang, J., Wang, M., Tie, J., Gao, X., Wu, Y., Song, J., & Xia, C. (2024) · Frontiers in Materials · doi:10.3389/fmats.2024.1422813 · Cited by 9
Zaoui, A., Rejeb, Z. B., Kwon, O., & Park, C. B. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.141620 · Cited by 11
Digital light processing 3D printing: Harnessing micro- and nanocellulose for advanced biocomposites
Abidnejad, R., Mousapour, M., Meinander, K., Baniasadi, H., Salmi, M., & Kontturi, E. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.146045 · Cited by 9
Song, Y., Yang, M., Liu, T., Sun, C., Jin, M., Haiyan, T., Zheng, D., & Zhang, Y. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.124591 · Cited by 9
Huang, W., Hua, M. Z., Li, S., Chen, K., Lu, X., & Wu, D. (2023) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2023.2242944 · Cited by 10
“Using AFM, the widths of cellulose microfibrils were found to be only 3–4 nm in the plant and wood samples but 10–20 nm in animals and algae (Iwamoto et al. 2009; Su et al. 2015).”
Heacock, J. A., Sun, Y., & Li, Y. V. (2024) · Cellulose · doi:10.1007/s10570-024-06255-3 · Cited by 9
“…reports for either E T or E A of hemp sourced CNCs. Methods for experimentally measuring E A include: Raman spectroscopy, combining AFM and SEM, FDS with AFM, w/H bonding, wave propagation, and X-ray diffraction (Cheng and Wang 2008; Iwamoto et al. 2009; Lahiji et al. 2010; Hang et al. 2011).”
InfluentialAraki, J., & Moriguchi, Y. (2016) · Polymers for Advanced Technologies · doi:10.1002/pat.3860 · Cited by 9
All‐Cellulose (Cellulose–Cellulose) Green Composites
Fujisawa, S., Fujisawa, S., Saito, T., & Isogai, A. (2018) · Wiley eBooks · doi:10.1002/9781119323327.ch6 · Cited by 13
Self-citationConcisely modularized assembling of graphene-based thin films with promising electrode performance
Wei, W., Vekariy, R. L., You, C., He, Y., Liu, P., Wu, D., & Zhang, F. (2019) · Materials Chemistry Frontiers · doi:10.1039/c8qm00628h · Cited by 9
Introduction to nanocellulose production from biological waste
Ilyas, R. A., Asyraf, M. R. M., Aisyah, H. A., Sapuan, S. M., Norrrahim, M. N. F., Ibrahim, R., Atikah, M. S. N., Atiqah, A., Zainudin, E. S., Ishak, M. R., et al. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-89909-3.00021-3 · Cited by 11
Smithers, E. T., Luo, J., & Dyson, R. (2024) · The European Physical Journal E · doi:10.1140/epje/s10189-023-00396-2 · Cited by 9
Preparation of Nanofibrillated Cellulose and Cellulose Whiskers
Plackett, D., & Iotti, M. (2013) · Wiley eBooks · doi:10.1002/9781118609958.ch14 · Cited by 9
CNC-loaded hydrogel particles generated from single- and double-emulsion drops
Ye, C., Kennedy, L. C., Shirk, K., Córdova‐Figueroa, U. M., Youngblood, J. P., & Martinez, C. J. (2014) · Green Materials · doi:10.1680/gmat.14.00016 · Cited by 9
KATAGIRI, K., SASAKI, K., Honda, S., Minami, S., Yamaguchi, S., Ehiro, T., Ozaki, T., Sonomura, H., Kawakita, S., Uchida, S., et al. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.10.030 · Cited by 9
Preparation and Properties of Nanopolysaccharides
Lavoine, N., Durmaz, E., & Trovagunta, R. (2019) · Springer series in biomaterials science and engineering · doi:10.1007/978-981-15-0913-1_1 · Cited by 10
Nomura, S., Sato, S., & Erata, T. (2020) · Chemical Physics Letters · doi:10.1016/j.cplett.2020.137154 · Cited by 9
Rahman, M. M., Howlader, A. H., Rahman, E., Roy, H., Hosen, M. M., Rahman, M. M., Sarkar, S. D., Roy, C. K., Imran, A. B., & Firoz, S. H. (2021) · Polymer Journal · doi:10.1038/s41428-021-00483-1 · Cited by 9
Cellulose‐Nanofiber‐Reinforced Rubber Composites with Resorcinol Resin Prepared by Elastic Kneading
Noguchi, T., Bamba, Y., Miura, T., Iwamoto, R., Endo, M., & Isogai, A. (2021) · Macromolecular Materials and Engineering · doi:10.1002/mame.202100483 · Cited by 9
Self-citationIsolation of Cellulose Nanowhiskers and Their Nanocomposites
Liu, D., Dong, Y., & Sui, G. (2016) · Springer eBooks · doi:10.1007/978-3-319-39715-3_5 · Cited by 11
Nanocellulose-based carbon as electrode materials for sodium-ion batteries
Ramanujam, B. T. S., Nanjundan, A. K., & Annamalai, P. K. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-822350-5.00012-6 · Cited by 9
Utilization of cellulose nanofiber in dental applications: A systematic review of in vitro evidence
Yang, K., Nugraha, A. P., Chen, J., Yang, H., Wang, J., Sáenz, J. R. V., & Hong, G. (2025) · Japanese Dental Science Review · doi:10.1016/j.jdsr.2025.05.002 · Cited by 8
“The elastic modulus of CNF has been reported to be as high as about 150 GPa in the longitudinal direction and about 18 – 50 GPa in the transverse direction [11,12].”
Wu, C.-N., & Wu, K. C. ‐. (2023) · Cellulose · doi:10.1007/s10570-023-05670-2 · Cited by 8
“…> 100, high crystallinity of ~ 74% (Isogai et al. 2011), high tensile strength of ~ 3 GPa (Saito et al. 2013), and high Young’s modulus of ~ 140 GPa (Iwamoto et al. 2009), biodegradable TOCNF has attracted much attention and already been produced by industries for various applications (Isogai…”
InfluentialChitin/calcium carbonate complex microparticles and their effects on polylactic acid composite films
Han, J. S., Kwon, S., Kim, S. Y., & Oh, K. (2024) · Cellulose · doi:10.1007/s10570-024-05967-w · Cited by 8
“This makes them suitable for various applications including as materials for the exterior and interior materials for electric vehicles (Li et al. 2021; Oksman et al. 2016; Bamba et al. 2017; Ifuku and Saimoto 2012; Ogawa et al. 2011; Iwamoto et al. 2009).”
Hatano, R., Tominaga, Y., Imai, Y., & Nakano, K. (2025) · Cellulose · doi:10.1007/s10570-025-06455-5 · Cited by 8
“CeNFs exhibit impressive tensile strength (2–3 GPa), high tensile modulus (130–150 GPa), and extremely low coefficient of thermal expansion (CTE, 0.1 ppm/K) (Iwamoto et al. 2009; Nogi et al. 2013; Saito et al. 2013).”
InfluentialQiang, Y., Patel, A., & Manas‐Zloczower, I. (2019) · Cellulose · doi:10.1007/s10570-019-02916-w · Cited by 8
Jiang, S., Farooq, A., Han, F., & Liu, L. (2021) · Fibers and Polymers · doi:10.1007/s12221-021-0279-4 · Cited by 8
Wu, J., & Andrews, M. P. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta05298b · Cited by 8
Nanobiotecnologia: plataforma tecnológica para biomateriais e aplicação biológica de nanoestruturas
Faria-Tischer, P. C. S., & Tischer, C. A. (2012) · BBR - Biochemistry and Biotechnology Reports · doi:10.5433/2316-5200.2012v1n1p32 · Cited by 8
Shimanouchi, T., Kamba, T., Yang, W. M., Aoyagi, S., & Kimura, Y. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.03.139 · Cited by 8
Electrochemical applications of nanocellulose
Mohammed, M. A., Basirun, W. J., Rahman, N. M. M. A., & Salleh, N. M. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-822350-5.00013-8 · Cited by 8
Irregular and suppressed elastic deformation by a structural twist in cellulose nanofibre models
Uetani, K., Uto, T., & Suzuki, N. (2021) · Scientific Reports · doi:10.1038/s41598-020-80890-1 · Cited by 8
Mechanics of Cellulose Nanocrystals and their Polymer Composites
Pakzad, A., & Yassar, R. S. (2010) · Advanced structured materials · doi:10.1007/8611_2010_38 · Cited by 9
“Atomic force microscopy (AFM) is another tool that has been used for measuring the elastic modulus of cellulose fibers [15, 30, 40].”
MethodCharacterization of Polysaccharide Nanocrystal‐Based Materials
Dufresne, A., & Lin, N. (2014) · Wiley eBooks · doi:10.1002/9783527689378.ch7 · Cited by 10
Toughening and Strengthening Mechanisms in Bamboo from Atoms to Fibers
Askarinejad, S., Youssefian, S., & Rahbar, N. (2020) · Springer eBooks · doi:10.1007/978-3-319-44680-6_88 · Cited by 10
1 Cellulose and potential reinforcement
(2012) · De Gruyter eBooks · doi:10.1515/9783110254600.1 · Cited by 8
“The elastic modulus of cellulosic nanocrystals (inappropriately called single microfibrils in the study) prepared from tunicate was also measured by AFM using a three-point bending test (Iwamoto et al., 2009).”
Yang, Z., Zhao, H., Huang, Y., & Liu, H. (2025) · Cellulose · doi:10.1007/s10570-025-06539-2 · Cited by 7
“Although the elastic modulus of single fibril TOCNFs has been reported to be as high as 145.2 ± 31.3 GPa (determined by atomic force microscope)(Iwamoto et al. 2009), the pure TOCNF aerogel (sample C1) obtained in this work exhibited much lower elastic modulus of 0.075 MPa), suggesting poor…”
InfluentialRahman, M. M., Rabby, M. M. R., Ismam, G. M. M., Zuhanee, M. K. A., Knani, S., Alreshidi, R., & Naiem, F. A. (2026) · Global Challenges · doi:10.1002/gch2.70107 · Cited by 11
“Many Studies found Young’s Elastic modulus of CNC near 50–150 GPa and transverse modulus of individual CNC near 18-50 GPa [ 81, 82 ] using AFM with 3D finite element analysis.”
Alasfar, R. H., Ahzi, S., Barth, N., Кочкодан, В., & Koç, M. (2022) · Mathematics and Mechanics of Complex Systems · doi:10.2140/memocs.2022.10.413 · Cited by 7
Nanocellulose for Sustainable Future Applications
AI-Jawhari, I. F. H. (2020) · Springer eBooks · doi:10.1007/978-3-030-11155-7_16-1 · Cited by 8
Fukuda, J., & Hsieh, Y. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c02092 · Cited by 7
Jinnai, H., Noguchi, T., Kumagai, A., Endo, M., & Isogai, A. (2022) · Polymer Composites · doi:10.1002/pc.26939 · Cited by 7
Self-citationHu, P., Wang, S., Yi, H., Wang, Z., Kang, J., & Wang, Y. (2024) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2024.124269 · Cited by 7
Abdellaoui, H., Qaiss, A. E. K., & Bouhfid, R. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-816789-2.00007-9 · Cited by 7
Manufacture of wood fiber reinforced polyvinyl acetate rigid foams
Ergün, M. E., Özen, E., Yildirim, N., & Dalkiliç, B. (2020) · Ormancılık Araştırma Dergisi · doi:10.17568/ogmoad.644334 · Cited by 7
“However, due to the poor distribution of cellulose nanomaterials, the development of new composite was not completed (Iwamoto et al., 2009; Iwatake et al., 2008; Roohani et al., 2008; Suryanegara et al., 2009).”
BackgroundPark, S., & Ding, S. (2020) · The Plant Journal · doi:10.1111/tpj.14870 · Cited by 7
Plant-Fiber and Wood-Based Functional Materials
Wimmer, R., Frey, M., Hausmann, M. K., Keplinger, T., Siqueira, G. D. F., & Zimmermann, T. (2023) · Springer handbooks · doi:10.1007/978-3-030-81315-4_30 · Cited by 8
Native Crystalline Polysaccharide Nanofibers: Processing and Properties
Samyn, P., & Osorio‐Madrazo, A. (2019) · Springer eBooks · doi:10.1007/978-3-319-53655-2_17 · Cited by 11
Negative magnetostrictive paper formed by dispersing CoFe2O4 particles in cellulose nanofibrils
Keino, T., Rova, L., Gallet--Pandellé, A., Kurita, H., & Narita, F. (2023) · Scientific Reports · doi:10.1038/s41598-023-31655-z · Cited by 7
Cellulose nanofibers for the production of bionanocomposites
Nechyporchuk, O. (2015) · theses.fr (ABES) · doi:10.70675/231cbf04z21a4z4e71z9e67z630faacd27da · Cited by 16
Inelastic behaviour of cellulose microfibril networks
Mohan, S., Koenderink, G. H., & Velikov, K. P. (2018) · Soft Matter · doi:10.1039/c8sm00904j · Cited by 6
Wholly Biobased Polyamide Thermoplastic Elastomer‐Cellulose Nanocomposites
Nurhamiyah, Y., Yoon, S., & Chen, B. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200120 · Cited by 6
Appidi, T., Sushma, M. V., & Rengan, A. K. (2022) · Springer eBooks · doi:10.1007/978-3-030-89621-8_12 · Cited by 6
Klemm, D., Lindström, T., Abitbol, T., & Kralisch, D. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-822350-5.00001-1 · Cited by 9
Cellulose nanofibril/polypropylene composites prepared under elastic kneading conditions
Niihara, K., Noguchi, T., Makise, T., Kashima, W., Endo, M., & Isogai, A. (2022) · Cellulose · doi:10.1007/s10570-022-04584-9 · Cited by 6
Self-citationPreparation, Microstructure, and Properties of Biofibers
Nishino, T. (2013) · Polymer Composites · doi:10.1002/9783527674220.ch3 · Cited by 7
Using focused ion beam for nanosized structure formation in microfluidic chips
Evstrapov, A. A., Mukhin, I. S., Kukhtevich, I. V., & Bukatin, A. (2011) · Technical Physics Letters · doi:10.1134/s1063785011100191 · Cited by 6
Cellulose nanocrystals : surface modification and advanced materials
Lin, N. (2014) · theses.fr (ABES) · doi:10.70675/140c7689z3e2bz4baez9603z3f501dc05d1d · Cited by 10
Nanocellulose: Preparation, Characterization and Applications
Shailaja, A. K., & Ragini, B. P. (2022) · Pharmaceutics and Pharmacology Research · doi:10.31579/2693-7247/039 · Cited by 5
Synergistic Reinforcement of Composite Hydrogels via Dual Cross-Linking and Supramolecular Filler
Noe, M. M., Sugawara, A., Luo, C., Yano, K., Fujiwara, Y., Konishi, T., UETSUJI, Y., Takashima, Y., & Uyama, H. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c00678 · Cited by 5
Boukind, S., Cheikhrouhou, W., Putaux, J., Boufi, S., & Sehaqui, H. (2025) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2025.109421 · Cited by 5
“Cellulose nanomaterials are highly appealing for composite applications due to their outstanding strength and stiffness, reported to be 2–6 GPa and 150 GPa, respectively [22,23].”
Nanoscale Examination of Chemical and Enzymatic Degradation of Plant Cell Walls
Soini, S. A., Domingo, N., Özparpucu, M., Windeisen‐Holzhauser, E., Gulec, S., & Merk, V. M. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.5c01551 · Cited by 5
Structure and Properties of Polysaccharide Nanocrystals
Hu, F., Fu, S., Huang, J. T., Anderson, D. P., & Chang, P. R. (2014) · Wiley eBooks · doi:10.1002/9783527689378.ch2 · Cited by 6
Nanocelluloses: Sources, Types, Unique Properties, Market, and Regulations
Jeevanandam, J., Ling, J. K. U., Tiong, M., Barhoum, A., Chan, Y. S., Acquah, C., & Danquah, M. K. (2021) · Springer eBooks · doi:10.1007/978-3-030-62976-2_4-1 · Cited by 5
Hess, K. M., Killgore, J. P., Mittal, A., & Srubar, W. V. (2022) · Cellulose · doi:10.1007/s10570-022-04603-9 · Cited by 5
Jagtiani, E. (2022) · Advances in Biochips · doi:10.25082/ab.2022.01.002 · Cited by 5
Zhang, J., Yamagishi, N., & Gotoh, Y. (2018) · Cellulose · doi:10.1007/s10570-018-2120-9 · Cited by 5
Nanocelluloses: Sources, Types, Unique Properties, Market, and Regulations
Jeevanandam, J., Ling, J. K. U., Tiong, M., Barhoum, A., Chan, Y. S., Acquah, C., & Danquah, M. K. (2022) · Springer eBooks · doi:10.1007/978-3-030-89621-8_4 · Cited by 13
Cathodic electrodeposition of organic nanocomposite coatings reinforced with cellulose nanocrystals
Atifi, S., & Hamad, W. Y. (2023) · Soft Matter · doi:10.1039/d3sm00505d · Cited by 5
Nanocellulose-Based Materials in Supramolecular Chemistry
Lokanathan, A. R., Kontturi, E., Linder, M. B., Rojas, O. J., Ikkala, O. T., & Gröschel, A. H. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-409547-2.12531-4 · Cited by 6
Jiang, F., & Hsieh, Y. (2017) · ACS symposium series · doi:10.1021/bk-2017-1251.ch007 · Cited by 6
Native Crystalline Polysaccharide Nanofibers: Processing and Properties
Samyn, P., & Osorio‐Madrazo, A. (2018) · Springer eBooks · doi:10.1007/978-3-319-42789-8_17-1 · Cited by 6
Jiang, F. (2020) · Wiley eBooks · doi:10.1002/9783527342587.ch4 · Cited by 8
Guo, M., & Hsieh, Y. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c00747 · Cited by 5
Nanocellulose-Based Materials with Superior Mechanical Performance
Ray, U., Zhu, S., Pang, Z., & Li, T. (2022) · Nanoscience and technology · doi:10.1007/978-3-031-14043-3_5 · Cited by 7
3D printing of biopolymer composites and nanocomposites
Mondal, D., Hashemi, S. S., Diederichs, E. V., Patil, H., & Willett, T. L. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95151-7.00007-7 · Cited by 8
Novel transparent and flexible nanocomposite film prepared from chrysotile nanofibres
Liu, K., Zhu, B., Feng, Q., & Duan, T. (2013) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2013.07.037 · Cited by 6
Cagnon, T. (2012) · theses.fr (ABES) · doi:10.70675/a57bd1e3za669z4b53z9244z2aeba880d523 · Cited by 7
Srivastava, A., Gupta, K., Solra, M., Jindal, G., & Rana, S. (2025) · Small · doi:10.1002/smll.202501453 · Cited by 4
Trovatti, E. (2013) · Wiley eBooks · doi:10.1002/9781118609958.ch15 · Cited by 4
Mechanical Techniques for Enhanced Dispersion of Cellulose Nanocrystals in Polymer Matrices
Shojaeiarani, J., Bajwa, D. S., & Hartman, K. (2019) · Springer eBooks · doi:10.1007/978-3-030-05399-4_16 · Cited by 4
Toughening and Strengthening Mechanisms in Bamboo from Atoms to Fibers
Askarinejad, S., Youssefian, S., & Rahbar, N. (2019) · Springer eBooks · doi:10.1007/978-3-319-50257-1_88-1 · Cited by 4
NMR of cellulose nanocrystals, mesoporous media, and liquid crystal assemblies
Dong, R. Y. (2019) · Liquid Crystals · doi:10.1080/02678292.2019.1613686 · Cited by 4
KATAGIRI, K., Honda, S., Minami, S., Yamaguchi, S., Sonomura, H., Ozaki, T., Kawakita, S., Uchida, S., Nezu, M., Takemura, M., et al. (2019) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2019.1633710 · Cited by 4
“5GPa and 150GPa, respectively [22, 23]; thus, the surface resin could be well stiffened by CNF.”
BackgroundDispersion Stability of Nanocellulose in Nonpolar Solvent: Chloroform
Indarti, E., Marwan, M., & Daud, W. W. (2020) · Materials science forum · doi:10.4028/www.scientific.net/msf.998.170 · Cited by 4
“The use of NC is particularly interesting because of their nanoscale dimension that could generate superior properties of elastic modulus of 150 GPA [6] higher surface area [7].”
BackgroundProgress on Materials Reinforcement using Mechanically Defibrillated Cellulose Nanofibers
Kurita, H., Kanno, T., & Narita, F. (2022) · Journal of the Society of Materials Science Japan · doi:10.2472/jsms.71.417 · Cited by 4
Guo, M., & Hsieh, Y. (2022) · RSC Advances · doi:10.1039/d2ra00722c · Cited by 4
Anisotropic Frictional Properties Induced by Cellulose Nanofibril Assembly
Ishida, K., & Kondo, T. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00072 · Cited by 4
Nanocellulose, The Origin of Natural Reinforcement in Advanced Biocomposites
Masruchin, N. (2023) · Journal of Fibers and Polymer Composites · doi:10.55043/jfpc.v2i1.82 · Cited by 4
Hatano, R., Tominaga, Y., Imai, Y., & Nakano, K. (2023) · Cellulose · doi:10.1007/s10570-023-05303-8 · Cited by 4
“In particular, considerable attention has been paid to the preparation and application of cellulose nanofibers (CeNFs) because of their outstanding properties, such as high tensile strength (2–3 GPa), high tensile modulus (130–150 GPa), and light weight (Iwamoto et al. 2009; Saito et al. 2013; Siró and Plackett 2010).”
BackgroundNanocellulose and Its Application for Shape-Memory Materials
Fu, S., & Tian, C. (2015) · Advanced structured materials · doi:10.1007/978-81-322-2473-0_4 · Cited by 5
Microscopic Characterization of Nanofibers and Nanocrystals
Moon, R. J., Pöhler, T., & Tammelin, T. (2014) · Materials and Energy/Materials and energy · doi:10.1142/9789814566469_0011 · Cited by 4
Deformation and fracture mechanisms in nanocellulose reinforced composites
Bulota, M. (2012) · Aaltodoc (Aalto University) · Cited by 5
Nanocellulose‐Modified Wood Adhesives
Veigel, S., Pinkl, S., & Gindl‐Altmutter, W. (2023) · Wiley eBooks · doi:10.1002/9781394175406.ch14 · Cited by 4
Yamasaki, Y., Okano, K., Mimura, T., Tsugawa, S., & Hosokawa, Y. (2025) · Planta · doi:10.1007/s00425-025-04683-4 · Cited by 3
“1a) (Carter et al. 2017; Milani et al. 2011; Fernandes et al. 2012; Iwamoto et al. 2009).”
Metadata
- Authors
- Iwamoto, S., Kai, W., Isogai, A., & Iwata, T.
- Affiliations
- The University of Tokyo (JP)
- Corresponding author
- Iwata, Tadahisa
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-07-31
- Volume
- 10
- Issue
- 9
- Pages
- 2571-2576
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1972994476
- Cited by
- 754
- References
- 40
- Citations by year
- 2026: 27 · 2025: 30 · 2024: 29 · 2023: 45 · 2022: 67 · 2021: 53 · 2020: 58 · 2019: 59 · 2018: 54 · 2017: 60 · 2016: 51 · 2015: 43 · 2014: 52 · 2013: 47 · 2012: 33
- FWCI
- 11.56
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Japan Society for the Promotion of Science (21228007)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Force Microscopy Techniques and Applications
- Keywords
- cellulose microfibrils, tunicate cellulose, elastic modulus, nanocellulose, TEMPO-oxidized cellulose, sulfuric acid hydrolysis, three-point bending, crystalline cellulose
- MeSH terms
- Animals, Cellulose, Hydrolysis, Urochordata, Microscopy, Atomic Force, Microfibrils, Elastic Modulus
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.