Elastic Modulus of Single Cellulose Microfibrils from Tunicate Measured by Atomic Force Microscopy
The DOI matches its Crossref record; 39 of the 40 references it cites were found in a registry or an index.
Abstract
The elastic modulus of single microfibrils from tunicate ( Halocynthia papillosa ) cellulose was measured by atomic force microscopy (AFM). Microfibrils with cross-sectional dimensions 8 x 20 nm and several micrometers in length were obtained by oxidation of cellulose with 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) as a catalyst and subsequent mechanical disintegration in water and by sulfuric acid hydrolysis. The nanocellulosic materials were deposited on a specially designed silicon wafer with grooves 227 nm in width, and a three-point bending test was applied to determine the elastic modulus using an AFM cantilever. The elastic moduli of single microfibrils prepared by TEMPO-oxidation and acid hydrolysis were 145.2 +/- 31.3 and 150.7 +/- 28.8 GPa, respectively. The result showed that the experimentally determined modulus of the highly crystalline tunicate microfibrils was in agreement with the elastic modulus of native cellulose crystals.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They proposed a value of 145.2 ± 31.3 GPa for microfibrils prepared by TEMPOoxidation and 150.7 ± 28.8 GPa for microfibrils produced by acid hydrolysis [81].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [81]
Citations
Cites
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
Calibration of atomic-force microscope tips
Hutter, J. L., & Bechhoefer, J. (1993) · Review of Scientific Instruments · doi:10.1063/1.1143970 · Cited by 4,194
Nishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493
Self-citationAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Self-citationCellulose: the structure slowly unravels
O'SULLIVAN, A. C. (1997) · Cellulose · doi:10.1023/a:1018431705579 · Cited by 1,499
Elastic and Shear Moduli of Single-Walled Carbon Nanotube Ropes
Salvetat, J.-P., Briggs, G., Bonard, J.-M., Bacsa, R., Kulik, A., Stöckli, T., Burnham, N., & Forró, L. (1999) · Physical Review Letters · doi:10.1103/physrevlett.82.944 · Cited by 1,488
Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation
Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., & Isogai, A. (2009) · Biomacromolecules · doi:10.1021/bm801065u · Cited by 1,271
Self-citationElazzouzi-Hafraoui, S., Nishiyama, Y., Putaux, J.-L., Heux, L., Dubreuil, F., & Rochas, C. (2008) · Biomacromolecules · doi:10.1021/bm700769p · Cited by 1,182
Research works printed but not linked: 3
- Turbak A. F., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 815
- Herrick F. W., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 797
- Xu W., 1994, Scanning Microsc., 8, 499
Cited by
Items 701–779 of 779
Surface modification of cellulose and nanocelluloses by innovative green processes
Douard, L. (2022) · theses.fr (ABES) · doi:10.70675/50d920d8zd819z4101z8eb5ze5001a8ce015 · Cited by 4
Valorisation des déchets cellulosiques tunisiens
Bettaieb, F. (2015) · theses.fr (ABES) · doi:10.70675/2dfec630z7c5ez4df4zb887z41a5d34053cd · Cited by 2
Martínez‐Sanz, M. (2013) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/30312
Mechanical Properties of Bacterial Cellulose Microfibril Bundles in Tensile Loading
Zamil, M. S., Weng, Y., Yi, H., Catchmark, J. M., & Puri, V. M. (2013) · 2013 Kansas City, Missouri, July 21 - July 24, 2013 · doi:10.13031/aim.20131607893
Electromechanical response of NCC-PEO composites
Bass, P. S., Baltzell, M., Zhang, L., Zhang, D., Tu, M., & Cheng, Z. ‐. (2014) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2044418
“Measurements using Raman spectroscopy [33] and atomic-force microscopy [34] estimate the NCC elastic modulus at 110-220 GPa, which is comparable to steel wire at 210 GPa.”
MethodCombining multiple NMR spectroscopic approaches in study of cellulosic materials
Virtanen, T. (2014) · Työväentutkimus Vuosikirja
Developments of Paper Devices Using Cellulose Nanofibers
Nogi, M. (2016) · Journal of The Japan Institute of Electronics Packaging · doi:10.5104/jiep.19.223
Non-linear behaviour of nanofibrillar cellulose foams
Karlberg, F. (2016) · KTH Publication Database DiVA (KTH Royal Institute of Technology)
Vpliv dodatka nanofibrilirane celuloze na mehanske lastnosti poli(3-hidroksibutirata)
Bogataj, V. Ž., Fabjan, E. Š., Poljanšek, I., & Oven, P. (2017) · Materiali in tehnologije · doi:10.17222/mit.2016.192
Proprietes rheologiques de suspensions aqueuses de cellulose nanocristalline modifiee ou non
Lenfant, G. (2016) · PolyPublie (École Polytechnique de Montréal)
GRAFTING POLYETHYLENE GLYCOL ON NANOCELLULOSE TOWARD BIODEGRADABLE POLYMER NANOCOMPOSITES
Geng, S., Harila, M., Yao, K., Zhou, Q., & Oksman, K. (2017) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.15432110
Núñez, C. N. V., Narváez, D., Narváez, C., Vizuete, K. S., & Arroyo, C. R. (2018) · Congreso de Ciencia y Tecnología ESPE · doi:10.24133/cctespe.v13i1.790
“[11] used an atomic force microscope (AFM) to determine the elastic modulus of cellulose fibers, but a relation to the solvent was not established.”
MethodCharacterization of Cellulose Nanocrystals and Their Application in Polyethylene Composites
Kaufman, G. J. (2016) · ERA: Education and Research Archive (University of Alberta) · doi:10.7939/r3q23rc1q
Shojaeiarani, J. (2018) · NDSU Repository (North Dakota State University) · Cited by 2
Griffo, A. (2019) · Aaltodoc (Aalto University)
Novas estratégias para valorização do extrato de tanino
Missio, A. L. (2017) · Americanae (AECID Library)
Interfaces in Modified Cellulose Nanocrystals Reinforced Polyethylene Composites
Inai, N. (2019) · Figshare
Preparation of Phosphorylated Cellulose Nanofiber and Its Utilization
Todoroki, Y. (2020) · JAPAN TAPPI JOURNAL · doi:10.2524/jtappij.74.116
Mechanical Properties of TEMPO Oxidized Cellulose Nanofibrils/Polymer Composites
Fujisawa, S. (2016) · Seikei-Kakou · doi:10.4325/seikeikakou.28.326
Cellulose Nanofiber Prepared by Phosphorylation and its Utilization
Yamanaka, M. (2021) · JAPAN TAPPI JOURNAL · doi:10.2524/jtappij.75.113
Hydrogels Derived from Cellulose Nanocrystals
Alizadehgiashi, M. (2019) · TSpace (University of Toronto)
Hamad, W. Y. (2017) · Wiley eBooks · doi:10.1002/9781118675601.biblio
Isogai, A. (2015) · Springer eBooks · doi:10.1007/978-3-642-29648-2_320
Self-citationNanocellulose for Sustainable Future Applications
AI-Jawhari, I. F. H. (2021) · Springer eBooks · doi:10.1007/978-3-030-36268-3_16
Manufacturing and Application Development of Phosphorylated Cellulose Nanofibers
Sakurai, M. (2022) · JAPAN TAPPI JOURNAL · doi:10.2524/jtappij.76.103
Nanocellulose for Water Treatment Applications
Kuang, Y., Zhu, P., Zhu, Y., & Jiang, F. (2022) · Nanoscience and technology · doi:10.1007/978-3-031-14043-3_10
Basta, A. H., & Lotfy, V. F. (2023) · Research Square · doi:10.21203/rs.3.rs-2612287/v1
Properties and Application Development of Phosphorylated Cellulose Nanofibers
Okuda, K. (2023) · JAPAN TAPPI JOURNAL · doi:10.2524/jtappij.77.87
Nagata, K., Ozaki, F., & SANADA, K. (2023) · NIPPON GOMU KYOKAISHI · doi:10.2324/gomu.96.99
Ozaki, F., Nagata, K., SANADA, K., MORIMOTO, Y., OGURA, K., & TAKAHASHI, N. (2023) · Journal of the Society of Materials Science Japan · doi:10.2472/jsms.72.514
Nogi, M., Koga, H., & Suganuma, K. (2013) · Sen i Kikai Gakkaishi (Journal of the Textile Machinery Society of Japan) · doi:10.4188/transjtmsj.66.356
Fujishiro, K., Sugihara, H., Ito, T., MAEDA, K., ISHIBASHI, K., SAKURAGAWA, T., & YAMADA, M. (2021) · Journal of The Adhesion Society of Japan · doi:10.11618/adhesion.57.81
Features and Developments of Phosphorylated Cellulose Nanofibers
Sato, M. (2024) · JAPAN TAPPI JOURNAL · doi:10.2524/jtappij.78.103
Aqeel, A. A. K. A., Hajjaj, S. S. H., Mohamed, H., Gomaa, M. R., & Obeidat, F. S. (2024) · Lecture notes in networks and systems · doi:10.1007/978-3-031-70684-4_4
The Utilization of CNF Sheets for Reinforcing Polycarbonate
Koga, T., & Fushimi, H. (2024) · JAPAN TAPPI JOURNAL · doi:10.2524/jtappij.78.940
Characteristics and Applications of Phosphorylated Cellulose Nanofibers
Isogai, T. (2025) · JAPAN TAPPI JOURNAL · doi:10.2524/jtappij.79.99
Aqeel, A. A. K. A., Hajjaj, S. S. H., Mohamed, H., Gomaa, M. R., & Obeidat, F. S. (2025) · Lecture notes in networks and systems · doi:10.1007/978-981-96-3949-6_52
Islam, M. T., Honda, S., KATAGIRI, K., SASAKI, K., Takeda, R., Shimizu, Y., & Cozigou, A. (2025) · Composites Part C Open Access · doi:10.1016/j.jcomc.2025.100600
Multifunctional delignified and compacted wood
Akpan, E. I., & Wetzel, B. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-28872-2.00014-0
Nishimura, A., & Uchida, T. (2025) · Cellulose · doi:10.1007/s10570-025-06799-y
“…cellulose nanofibers prepared from CP have attracted attention as promising natural nanofibers with various valuable properties, including extremely high aspect ratios (Jakob et al. 1995; Saxena and Brown 2005), high stiffness (Iwamoto et al. 2009), and low thermal expansion (Yano et al. 2005).”
Ozaki, F., Nagata, K., SANADA, K., MORIMOTO, Y., OGURA, K., SAKAMOTO, Y., IKEDA, T., & NASSHO, Y. (2024) · Journal of The Adhesion Society of Japan · doi:10.11618/adhesion.60.32
Ishida, K., & Tsujii, Y. (2025) · Macromolecular Rapid Communications · doi:10.1002/marc.202500760
“Therefore, quasi-2D fiber clusters exhibit low E ′ values, in contrast to the high mechanical strength of single CNFs [34].”
Utilisation de cellulose pour l'élaboration de matériaux photoluminescents ou conducteurs
Pras, O. (2011) · theses.fr (ABES) · doi:10.70675/4aecf8d7za747z494cz80abzc66657cc1c86 · Cited by 7
Pentari, C. (2024) · DSpace - NTUA (National Technical University of Athens) · doi:10.26240/heal.ntua.27152
Aigner, N. (2011) · BOK:ePub (Universitätsbibliothek der Universität f Bodenkultur Wien)
Tekstile entegre edilmiş solunum sistemi için ayarlanabilir karbon nanotüp tabanlı sensörler
Arslan, D. (2024) · Istanbul Technical University Academic Open Archive (Istanbul Technical University)
Araki, J., & Ouchi, H. (2026) · Journal of Fiber Science and Technology · doi:10.2115/fiberst.2026-0003
Nanocellulose for Sustainable Future Applications
AI-Jawhari, I. F. H. (2026) · Springer eBooks · doi:10.1007/978-3-030-11155-7_16-2
Characteristics and Development of Phosphorylated Cellulose Nanofibers
Sai, T. (2026) · JAPAN TAPPI JOURNAL · doi:10.2524/jtappij.80.89
Muraille, L. (2014) · theses.fr (ABES) · doi:10.70675/3e83d1c8z7b2az4c68zba6fz06681616893e · Cited by 1
Potential of nanocellulose for conductive ink preparation
Hoeng, F. (2016) · theses.fr (ABES) · doi:10.70675/cc8607dez782bz4a5dz9a87zde943b018412 · Cited by 2
Développement de matériaux super-isolants thermiques à partir de nano-fibres de cellulose
Jiménez-Saelices, C. (2016) · theses.fr (ABES) · doi:10.70675/25ac96b5z665bz411dz834cz820d1a48ccc1 · Cited by 7
Modifying the surface of nanocellulose to impart active properties
Saini, S. (2015) · theses.fr (ABES) · doi:10.70675/56926c94zfa0cz43d7z8a54z61c8670d4bed
Dhuiège, B. (2017) · theses.fr (ABES) · doi:10.70675/02d813dcz91dcz4a13z822bz27ab613199a9 · Cited by 1
Ganfoud, R. (2018) · theses.fr (ABES) · doi:10.70675/df203f3dz9c85z4ee5z9494z0198b6bee34e
Nanocomposites cellulosiques anisotropes élaborés par ultrafiltration et réticulation UV
Mandin, S. (2024) · theses.fr (ABES) · doi:10.70675/39e33bd9z59acz4f3czb2e9z1e714ed595a5
Guivier, M. (2023) · theses.fr (ABES) · doi:10.70675/3f625d5az21b5z4162zb931z8ab82f4f8d05 · Cited by 1
Gljušćić, M., Cortés, A., Suárez, A. J., Prolongo, S. G., & Santiuste, C. (2026) · Journal of Natural Fibers · doi:10.1080/15440478.2026.2658268
Ishioka, S., Kasuga, T., Mizui, A., Huang, Y., Koga, H., & Nogi, M. (2026) · Journal of Wood Science · doi:10.1186/s10086-026-02279-4
Zu, M., Jia, Z., Chen, Q., Zhang, H., Yang, C., Jing, Y., & Qiao, H. (2026) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2026.125508
Development of a Cellulose Nanofibril Production Process from Sea Squirt Tunics
Kim, M. S., Tak, J. H., & Lee, J. (2026) · Journal of Korea Technical Association of The Pulp and Paper Industry · doi:10.7584/jktappi.2026.6.58.3.73
Yokota, S., & Yonemitsu, K. (2026) · Surfaces and Interfaces · doi:10.1016/j.surfin.2026.110493
Molecular origin of anisotropic shear elastoplasticity in chitin
Wan, Z., Lu, Y. C., Yu, Y., Niu, X., Zhou, C., Lu, X., Yan, Y., Smith, J. C., Srebnik, S., & Rojas, O. J. (2026) · Science Advances · doi:10.1126/sciadv.adz6220
“For example, although cellulose nano-crystals (CNCs) have even higher longitudinal moduli ( ∼ 150 GPa) ( 16 , 17 ), they often experience bending, distortion, and defect formation under shear forces applied during processing ( 18 ).”
Wan, Z., Zhou, C., Perez, M., Qiu, J., Shen, Z., Lu, X., Wu, J., Cui, S., Yu, Y., Niu, X., et al. (2026) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2613826123
Microfibrillated cellulose-reinforced bio-based epoxy composites for liquid deposition modeling
Albertini, E., Vitale, A., Bongiovanni, R. M., & Vacche, S. D. (2026) · Cellulose · doi:10.1007/s10570-026-07229-3
Maeda, A., 大川, 一., Kobayashi, K., Kusumi, R., & Wada, M. (2026) · Biomacromolecules · doi:10.1021/acs.biomac.6c01103
Tailoring the Properties of CNF Sheets via Grafting onto Surface Divalent Phosphate Groups
Sakiyama, A., Saito, T., & Fujisawa, S. (2026) · JAPAN TAPPI JOURNAL · doi:10.2524/jtappij.80.836
リン酸化セルロースナノファイバー表面への高密度グラフト化とフィルムの物性制御
Sakiyama, A., 齋藤, 継., & 藤澤秀次 (2026) · JAPAN TAPPI JOURNAL · doi:10.2524/jtappij.80.843
Jiang, K., & Duan, B. (2026) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2026.125920
Lee, J., Chortos, A., & Kim, M. K. (2026) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-026-00934-1
Conception, mise en oeuvre et caractérisation de nouveaux bio-nano-matériaux fonctionnels.
Lavoine, N. (2013) · theses.fr (ABES) · doi:10.70675/1dadcdaczebb3z4726z8788z4301b353c404 · Cited by 2
Tanpichai, S. (2012) · Research Explorer (The University of Manchester) · Cited by 1
Metadata
- Authors
- Iwamoto, S., Kai, W., Isogai, A., & Iwata, T.
- Affiliations
- The University of Tokyo (JP)
- Corresponding author
- Iwata, Tadahisa
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-07-31
- Volume
- 10
- Issue
- 9
- Pages
- 2571-2576
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1972994476
- Cited by
- 754
- References
- 40
- Citations by year
- 2026: 27 · 2025: 30 · 2024: 29 · 2023: 45 · 2022: 67 · 2021: 53 · 2020: 58 · 2019: 59 · 2018: 54 · 2017: 60 · 2016: 51 · 2015: 43 · 2014: 52 · 2013: 47 · 2012: 33
- FWCI
- 11.56
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Japan Society for the Promotion of Science (21228007)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Force Microscopy Techniques and Applications
- Keywords
- cellulose microfibrils, tunicate cellulose, elastic modulus, nanocellulose, TEMPO-oxidized cellulose, sulfuric acid hydrolysis, three-point bending, crystalline cellulose
- MeSH terms
- Animals, Cellulose, Hydrolysis, Urochordata, Microscopy, Atomic Force, Microfibrils, Elastic Modulus
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.