The DOI matches its Crossref record; 39 of the 40 references it cites were found in a registry or an index.
Elastic Modulus of Single Cellulose Microfibrils from Tunicate Measured by Atomic Force Microscopy
Abstract
The elastic modulus of single microfibrils from tunicate ( Halocynthia papillosa ) cellulose was measured by atomic force microscopy (AFM). Microfibrils with cross-sectional dimensions 8 x 20 nm and several micrometers in length were obtained by oxidation of cellulose with 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) as a catalyst and subsequent mechanical disintegration in water and by sulfuric acid hydrolysis. The nanocellulosic materials were deposited on a specially designed silicon wafer with grooves 227 nm in width, and a three-point bending test was applied to determine the elastic modulus using an AFM cantilever. The elastic moduli of single microfibrils prepared by TEMPO-oxidation and acid hydrolysis were 145.2 +/- 31.3 and 150.7 +/- 28.8 GPa, respectively. The result showed that the experimentally determined modulus of the highly crystalline tunicate microfibrils was in agreement with the elastic modulus of native cellulose crystals.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They proposed a value of 145.2 ± 31.3 GPa for microfibrils prepared by TEMPOoxidation and 150.7 ± 28.8 GPa for microfibrils produced by acid hydrolysis [81].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [81]
Citations
Cites
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
Calibration of atomic-force microscope tips
Hutter, J. L., & Bechhoefer, J. (1993) · Review of Scientific Instruments · doi:10.1063/1.1143970 · Cited by 4,194
Nishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493
Self-citationAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Self-citationCellulose: the structure slowly unravels
O'SULLIVAN, A. C. (1997) · Cellulose · doi:10.1023/a:1018431705579 · Cited by 1,499
Elastic and Shear Moduli of Single-Walled Carbon Nanotube Ropes
Salvetat, J.-P., Briggs, G., Bonard, J.-M., Bacsa, R., Kulik, A., Stöckli, T., Burnham, N., & Forró, L. (1999) · Physical Review Letters · doi:10.1103/physrevlett.82.944 · Cited by 1,488
Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation
Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., & Isogai, A. (2009) · Biomacromolecules · doi:10.1021/bm801065u · Cited by 1,271
Self-citationElazzouzi-Hafraoui, S., Nishiyama, Y., Putaux, J.-L., Heux, L., Dubreuil, F., & Rochas, C. (2008) · Biomacromolecules · doi:10.1021/bm700769p · Cited by 1,182
Research works printed but not linked: 3
- Turbak A. F., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 815
- Herrick F. W., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 797
- Xu W., 1994, Scanning Microsc., 8, 499
Cited by
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
TEMPO-oxidized cellulose nanofibers
Isogai, A., Saito, T., & Fukuzumi, H. (2011) · Nanoscale · doi:10.1039/c0nr00583e · Cited by 3,179
Self-citationReview: current international research into cellulose nanofibres and nanocomposites
Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., et al. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3874-0 · Cited by 2,418
Lavoine, N., Desloges, I., Dufresne, A., & Bras, J. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.05.026 · Cited by 1,791
Abdul Khalil, H. P. S., Davoudpour, Y., Islam, M. N., Mustapha, A., Sudesh, K., Dungani, R., & Jawaid, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.08.069 · Cited by 1,333
Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Siqueira, G., Bras, J., & Dufresne, A. (2010) · Polymers · doi:10.3390/polym2040728 · Cited by 1,328
“8 GPa for microfibrils produced by acid hydrolysis [81].”
BackgroundCellulose and its derivatives: towards biomedical applications
Seddiqi, H., Oliaei, E., Honarkar, H., Jin, J., Geonzon, L. C., Bacabac, R. G., & Klein-Nulend, J. (2021) · Cellulose · doi:10.1007/s10570-020-03674-w · Cited by 1,167
“Reference(s) (Measurement or estimation techniques) Plant fiber 5–130 300–1050 1–8 Bledzki and Gassan (1999), López et al. (2012, 2013), Moon et al. (2011) (Tensile) Wood pulp fiber 14–40 380–1240 3–22 Bledzki and Gassan (1999), López et al. (2011), Moon et al. (2011), Mott et al. (2002) (Tensile and micro-mechanica…”
InfluentialCellulose nanocrystals: synthesis, functional properties, and applications
George, J., & S N, S. (2015) · Nanotechnology, Science and Applications · doi:10.2147/nsa.s64386 · Cited by 953
“47 Using AFM, the transverse elastic modulus of CNCs was also determined by comparing the experimental force–distance curves with three-dimensional finite elemental calculations.”
Cellulose nanocrystals and related nanocomposites: Review of some properties and challenges
Mariano, M., El Kissi, N., & Dufresne, A. (2014) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23490 · Cited by 933
Lin, N., Huang, J., & Dufresne, A. (2012) · Nanoscale · doi:10.1039/c2nr30260h · Cited by 885
Jonoobi, M., Oladi, R., Davoudpour, Y., Oksman, K., Dufresne, A., Hamzeh, Y., & Davoodi, R. (2015) · Cellulose · doi:10.1007/s10570-015-0551-0 · Cited by 847
“Measuring the elastic modulus of tunicate single microfibrils by the bending test using an AFM cantilever was the subject of research by Iwamoto et al. (2009).”
MethodOlsson, R. T., Azizi Samir, M. A. S., Salazar-Alvarez, G., Belova, L., Ström, V., Berglund, L. A., Ikkala, O., Nogués, J., & Gedde, U. W. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.155 · Cited by 807
“creates stiff magnetic nanopaper films because of the excellent mechanical properties of the individual cellulose nanofibre”
BackgroundCellulose nanowhiskers: promising materials for advanced applications
Eichhorn, S. J. (2011) · Soft Matter · doi:10.1039/c0sm00142b · Cited by 782
Preparation and characterization of cellulose nanocrystals from rice straw
Lu, P., & Hsieh, Y.-L. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.022 · Cited by 635
Cellulose reinforced polymer composites and nanocomposites: a critical review
Miao, C., & Hamad, W. Y. (2013) · Cellulose · doi:10.1007/s10570-013-0007-3 · Cited by 630
“2005a) m From references (Šturcová et al. 2005; Iwamoto et al. 2009; Sakurada and Nukushina 1962) n Unpublished results from the authors’ laboratory based on SEM evaluation of approximately 1,000 samples Cellulose (2013) 20:2221–2262 2253”
BackgroundMethodSaito, T., Kuramae, R., Wohlert, J., Berglund, L. A., & Isogai, A. (2013) · Biomacromolecules · doi:10.1021/bm301674e · Cited by 625
Self-citationChemically and mechanically isolated nanocellulose and their self-assembled structures
Jiang, F., & Hsieh, Y.-L. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.02.022 · Cited by 586
Isolation and characterization of nanocrystalline cellulose from sugar palm fibres (Arenga Pinnata)
Ilyas, R. A., Sapuan, S. M., & Ishak, M. R. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.045 · Cited by 568
H.P.S, A. K., Saurabh, C. K., A.S., A., Nurul Fazita, M. R., Syakir, M. I., Davoudpour, Y., Rafatullah, M., Abdullah, C. K., M. Haafiz, M. K., & Dungani, R. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.05.028 · Cited by 542
Chen, W., Yu, H., Liu, Y., Hai, Y., Zhang, M., & Chen, P. (2011) · Cellulose · doi:10.1007/s10570-011-9497-z · Cited by 541
“Although CNFs can be extracted from algae, tunicates ( Iwamoto et al. 2009; van den Berg et al. 2007), and bacterial cellulose (BC) (Hirai et al. 2008; Roman and Winter 2004), the main source of CNFs is found in natural plant cell walls (Klemm et al. 2005).”
BackgroundHighly Thermally Conductive Papers with Percolative Layered Boron Nitride Nanosheets
Zhu, H., Li, Y., Fang, Z., Xu, J., Cao, F., Wan, J., Preston, C., Yang, B., & Hu, L. (2014) · ACS Nano · doi:10.1021/nn500134m · Cited by 493
“VOL. 8 ’ NO. 4 ’ 3606–3613 ’ 2014 www.acsnano.org 3610 The cellulose microfibril has a Young's modulus up to 145 GPa.29,30 In the hybrid film, the 1D NFC fibers enhance the strength of the composite film as a glue by wrapping the 2D plates together.”
BackgroundEntire Surface Oxidation of Various Cellulose Microfibrils by TEMPO-Mediated Oxidation
Okita, Y., Saito, T., & Isogai, A. (2010) · Biomacromolecules · doi:10.1021/bm100214b · Cited by 468
Self-citationWood nanocelluloses: fundamentals and applications as new bio-based nanomaterials
Isogai, A. (2013) · Journal of Wood Science · doi:10.1007/s10086-013-1365-z · Cited by 443
“These have spindle-like morphologies with low aspect ratios [3, 5, 6, 9, 43].”
BackgroundSelf-citationPei, A., Malho, J.-M., Ruokolainen, J., Zhou, Q., & Berglund, L. A. (2011) · Macromolecules · doi:10.1021/ma200318k · Cited by 421
Fast Preparation Procedure for Large, Flat Cellulose and Cellulose/Inorganic Nanopaper Structures
Sehaqui, H., Liu, A., Zhou, Q., & Berglund, L. A. (2010) · Biomacromolecules · doi:10.1021/bm100490s · Cited by 400
Hamedi, M. M., Hajian, A., Fall, A. B., Håkansson, K., Salajkova, M., Lundell, F., Wågberg, L., & Berglund, L. A. (2014) · ACS Nano · doi:10.1021/nn4060368 · Cited by 381
Atomic Force Microscopy Characterization of Cellulose Nanocrystals
Lahiji, R. R., Xu, X., Reifenberger, R., Raman, A., Rudie, A., & Moon, R. J. (2010) · Langmuir · doi:10.1021/la903111j · Cited by 368
Abeer, M. M., Mohd Amin, M. C. I., & Martin, C. (2014) · Journal of Pharmacy and Pharmacology · doi:10.1111/jphp.12234 · Cited by 368
“8 GPa, which implied that the elastic moduli of the fibrillar and crystalline forms were in agreement with each other and they could be used interchangeably for imparting mechanical strength to composites.([3]) Moreover, a view of the various morphological forms in addition to the microfibrils is required to account f…”
BackgroundEmerging Nanocellulose Technologies: Recent Developments
Isogai, A. (2021) · Advanced Materials · doi:10.1002/adma.202000630 · Cited by 367
Self-citationYang, W., Zhao, Z., Wu, K., Huang, R., Liu, T., Jiang, H., Chen, F., & Fu, Q. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00400a · Cited by 363
Review: Catalytic oxidation of cellulose with nitroxyl radicals under aqueous conditions
Isogai, A., Hänninen, T., Fujisawa, S., & Saito, T. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.007 · Cited by 349
“Tensile elastic moduli of TOCNs have been meaured only for those prepared from tunicate cellulose with large icrofibril widths from stress–strain curves obtained using a canilever in AFM, and are ≈140 GPa [115].”
BackgroundMethodInfluentialSelf-citationCellulose Nanofiber Orientation in Nanopaper and Nanocomposites by Cold Drawing
Sehaqui, H., Ezekiel Mushi, N., Morimune, S., Salajkova, M., Nishino, T., & Berglund, L. A. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am2016766 · Cited by 351
Self-aligned integration of native cellulose nanofibrils towards producing diverse bulk materials
Saito, T., Uematsu, T., Kimura, S., Enomae, T., & Isogai, A. (2011) · Soft Matter · doi:10.1039/c1sm06050c · Cited by 344
Self-citationMXene‐Reinforced Cellulose Nanofibril Inks for 3D‐Printed Smart Fibres and Textiles
Cao, W., Ma, C., Mao, D., Zhang, J., Ma, M., & Chen, F. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201905898 · Cited by 332
Structure and Mechanical Properties of Wet-Spun Fibers Made from Natural Cellulose Nanofibers
Iwamoto, S., Isogai, A., & Iwata, T. (2011) · Biomacromolecules · doi:10.1021/bm101510r · Cited by 337
Self-citation3D Printed High‐Performance Lithium Metal Microbatteries Enabled by Nanocellulose
Cao, D., Xing, Y., Tantratian, K., Wang, X., Ma, Y., Mukhopadhyay, A., Cheng, Z., Zhang, Q., Jiao, Y., Chen, L., et al. (2019) · Advanced Materials · doi:10.1002/adma.201807313 · Cited by 337
Cellulose nanocrystal isolation from tomato peels and assembled nanofibers
Jiang, F., & Hsieh, Y.-L. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.12.064 · Cited by 329
Vegetable nanocellulose in food science: A review
Gómez H., C., Serpa, A., Velásquez-Cock, J., Gañán, P., Castro, C., Vélez, L., & Zuluaga, R. (2016) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2016.01.023 · Cited by 331
A comparative study of cellulose nanofibrils disintegrated via multiple processing approaches
Qing, Y., Sabo, R., Zhu, J. Y., Agarwal, U., Cai, Z., & Wu, Y. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.04.086 · Cited by 311
Biobased Nanocomposites from Layer-by-Layer Assembly of Cellulose Nanowhiskers with Chitosan
de Mesquita, J. P., Donnici, C. L., & Pereira, F. V. (2010) · Biomacromolecules · doi:10.1021/bm9011985 · Cited by 322
3D network of cellulose-based energy storage devices and related emerging applications
Dutta, S., Kim, J., Ide, Y., Ho Kim, J., Hossain, M. S. A., Bando, Y., Yamauchi, Y., & Wu, K. C.-W. (2017) · Materials Horizons · doi:10.1039/c6mh00500d · Cited by 323
Song, Y., Shi, Z., Hu, G.-H., Xiong, C., Isogai, A., & Yang, Q. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta08642h · Cited by 318
Self-citationBenítez, A. J., & Walther, A. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02006f · Cited by 310
The strength and stiffness of oriented wood and cellulose-fibre materials: A review
Jakob, M., Mahendran, A. R., Gindl-Altmutter, W., Bliem, P., Konnerth, J., Müller, U., & Veigel, S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100916 · Cited by 292
Nanocellulose-stabilized Pickering emulsions and their applications
Fujisawa, S., Togawa, E., & Kuroda, K. (2017) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2017.1401423 · Cited by 298
Jin, H., Kettunen, M., Laiho, A., Pynnönen, H., Paltakari, J., Marmur, A., Ikkala, O., & Ras, R. H. A. (2011) · Langmuir · doi:10.1021/la103877r · Cited by 306
Koga, H., Saito, T., Kitaoka, T., Nogi, M., Suganuma, K., & Isogai, A. (2013) · Biomacromolecules · doi:10.1021/bm400075f · Cited by 298
Self-citationNanocellulose-Based Nanocomposites for Sustainable Applications: A Review
Norizan, M. N., Shazleen, S. S., Alias, A. H., Sabaruddin, F. A., Asyraf, M. R. M., Zainudin, E. S., Abdullah, N., Samsudin, M. S., Kamarudin, S. H., & Norrrahim, M. N. F. (2022) · Nanomaterials · doi:10.3390/nano12193483 · Cited by 271
“In most cases, TEMPO-oxidation pre-treatment was followed by a mechanical disintegration treatment using a mixer, refining and homogenization, microfluidization, ball milling, grinding, cryocrushing, steam explosion, ultrasonication, intense stirring and centrifugation [103,115], etc.”
MethodUnderstanding the Dispersive Action of Nanocellulose for Carbon Nanomaterials
Hajian, A., Lindström, S. B., Pettersson, T., Hamedi, M. M., & Wågberg, L. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04405 · Cited by 293
Super‐Strong, Super‐Stiff Macrofibers with Aligned, Long Bacterial Cellulose Nanofibers
Wang, S., Jiang, F., Xu, X., Kuang, Y., Fu, K., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201702498 · Cited by 292
Xiong, R., Grant, A. M., Ma, R., Zhang, S., & Tsukruk, V. V. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.01.002 · Cited by 276
Relating the mechanics of the primary plant cell wall to morphogenesis
Bidhendi, A. J., & Geitmann, A. (2016) · Journal of Experimental Botany · doi:10.1093/jxb/erv535 · Cited by 263
Wang, M., Anoshkin, I. V., Nasibulin, A. G., Korhonen, J. T., Seitsonen, J., Pere, J., Kauppinen, E. I., Ras, R. H. A., & Ikkala, O. (2013) · Advanced Materials · doi:10.1002/adma.201300256 · Cited by 270
Cellulose Nanomaterials in Interfacial Evaporators for Desalination: A “Natural” Choice
Cao, S., Rathi, P., Wu, X., Ghim, D., Jun, Y., & Singamaneni, S. (2021) · Advanced Materials · doi:10.1002/adma.202000922 · Cited by 275
Nanocellulose for Sustainable Water Purification
Das, R., Lindström, T., Sharma, P. R., Chi, K., & Hsiao, B. S. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00683 · Cited by 261
Photoswitchable Superabsorbency Based on Nanocellulose Aerogels
Kettunen, M., Silvennoinen, R. J., Houbenov, N., Nykänen, A., Ruokolainen, J., Sainio, J., Pore, V., Kemell, M., Ankerfors, M., Lindström, T., et al. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201001431 · Cited by 259
Frka-Petesic, B., Parton, T. G., Honorato-Rios, C., Narkevicius, A., Ballu, K., Shen, Q., Lu, Z., Ogawa, Y., Haataja, J. S., Droguet, B. E., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00836 · Cited by 236
Molecular Origin of Strength and Stiffness in Bamboo Fibrils
Youssefian, S., & Rahbar, N. (2015) · Scientific Reports · doi:10.1038/srep11116 · Cited by 261
Xue, Y., Mou, Z., & Xiao, H. (2017) · Nanoscale · doi:10.1039/c7nr04994c · Cited by 251
Farooq, A., Patoary, M. K., Zhang, M., Mussana, H., Li, M., Naeem, M. A., Mushtaq, M., Farooq, A., & Liu, L. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.03.163 · Cited by 252
Cellulose nanocomposites by supramolecular chemistry engineering
Chen, L., Yu, L., Qi, L., Eichhorn, S. J., Isogai, A., Lizundia, E., Zhu, J. Y., & Chen, C. (2025) · Nature Reviews Materials · doi:10.1038/s41578-025-00810-5 · Cited by 196
“Experimental bending tests further confirm that nanocellulose retains the intrinsic stiffness of crystalline cellulose 148 .”
Self-citationCellulose nanocrystals: Fundamentals and biomedical applications
Mali, P., & Sherje, A. P. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118668 · Cited by 236
Alignment of Cellulose Nanofibers: Harnessing Nanoscale Properties to Macroscale Benefits
Li, K., Clarkson, C. M., Wang, L., Liu, Y., Lamm, M., Pang, Z., Zhou, Y., Qian, J., Tajvidi, M., Gardner, D. J., et al. (2021) · ACS Nano · doi:10.1021/acsnano.0c07613 · Cited by 242
Review of the recent developments in all-cellulose nanocomposites: Properties and applications
Tanpichai, S., Boonmahitthisud, A., Soykeabkaew, N., & Ongthip, L. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119192 · Cited by 221
Biopolymeric photonic structures: design, fabrication, and emerging applications
Xiong, R., Luan, J., Kang, S., Ye, C., Singamaneni, S., & Tsukruk, V. V. (2020) · Chemical Society Reviews · doi:10.1039/c8cs01007b · Cited by 226
Siqueira, G., Tapin-Lingua, S., Bras, J., da Silva Perez, D., & Dufresne, A. (2010) · Cellulose · doi:10.1007/s10570-010-9449-z · Cited by 212
“Values of 145.2 ± 31.3 GPa and 150.7 ± 28.8 GPa were reported for microfibrils prepared by 2,2,6,6-tetramethylpiperidinel-oxyl radical (TEMPO)-oxidation and acid hydrolysis, respectively ( Iwamoto et al. 2009 ).”
BackgroundMethodInfluentialComplete nanofibrillation of cellulose prepared by phosphorylation
Noguchi, Y., Homma, I., & Matsubara, Y. (2017) · Cellulose · doi:10.1007/s10570-017-1191-3 · Cited by 209
Rebouillat, S., & Pla, F. (2013) · Journal of Biomaterials and Nanobiotechnology · doi:10.4236/jbnb.2013.42022 · Cited by 207
“tunicate [41-44], algae [45-50], bacteria cellulose [51,52] etc.”
BackgroundSpinella, S., Maiorana, A., Qian, Q., Dawson, N. J., Hepworth, V., McCallum, S. A., Ganesh, M., Singer, K. D., & Gross, R. A. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01489 · Cited by 207
Mechanics Design in Cellulose‐Enabled High‐Performance Functional Materials
Ray, U., Zhu, S., Pang, Z., & Li, T. (2021) · Advanced Materials · doi:10.1002/adma.202002504 · Cited by 204
Nanocellulose‐Enabled Membranes for Water Purification: Perspectives
Sharma, P. R., Sharma, S. K., Lindström, T., & Hsiao, B. S. (2020) · Advanced Sustainable Systems · doi:10.1002/adsu.201900114 · Cited by 210
Nanocellulose for Industrial Use
Blanco, A., Monte, M. C., Campano, C., Balea, A., Merayo, N., & Negro, C. (2018) · Handbook of Nanomaterials for Industrial Applications · doi:10.1016/b978-0-12-813351-4.00005-5 · Cited by 190
Thermoplastic Processing of PLA/Cellulose Nanomaterials Composites
Mokhena, T. C., Sefadi, J. S., Sadiku, E. R., John, M. J., Mochane, M. J., & Mtibe, A. (2018) · Polymers · doi:10.3390/polym10121363 · Cited by 193
“3 a [25] MCC - >2000 25 ± 4 c [33] a Atomic Force Microscopy (AFM); b High-Resolution Transmission Electron Microscopy (HR-TEM) micromechanics; c Raman (EA elastic modulus in axial direction, and ET elastic modulus in transverse).”
MethodCellulose long fibers fabricated from cellulose nanofibers and its strong and tough characteristics
Kafy, A., Kim, H. C., Zhai, L., Kim, J. W., Hai, L. V., Kang, T. J., & kim, J. (2017) · Scientific Reports · doi:10.1038/s41598-017-17713-3 · Cited by 188
Carbon‐Based Sorbents with Three‐Dimensional Architectures for Water Remediation
Chen, B., Ma, Q., Tan, C., Lim, T., Huang, L., & Zhang, H. (2015) · Small · doi:10.1002/smll.201403729 · Cited by 195
Ding, A., Tang, F., & Alsberg, E. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00070 · Cited by 165
Pracella, M., Haque, M. M.-U., & Puglia, D. (2014) · Polymer · doi:10.1016/j.polymer.2014.06.071 · Cited by 193
Mechanical properties of cellulose nanofibril papers and their bionanocomposites: A review
Mokhena, T. C., Sadiku, E. R., Mochane, M. J., Ray, S. S., John, M. J., & Mtibe, A. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118507 · Cited by 186
Tamo, A. K. (2024) · Journal of Materials Chemistry B · doi:10.1039/d4tb00397g · Cited by 171
Zubik, K., Singhsa, P., Wang, Y., Manuspiya, H., & Narain, R. (2017) · Polymers · doi:10.3390/polym9040119 · Cited by 181
“In fact, the elastic modulus of native cellulose crystals, determined using several techniques, yield values up to 150 GPa [39,40].”
MethodThambiraj, S., & Ravi Shankaran, D. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.03.272 · Cited by 184
Jalal Uddin, A., Araki, J., & Gotoh, Y. (2011) · Biomacromolecules · doi:10.1021/bm101280f · Cited by 185
Ma, H., Burger, C., Hsiao, B. S., & Chu, B. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.11.055 · Cited by 180
“It is worthwhile to note that with this approach, Isogai and his coworkers have successfully demonstrated the preparation and characterization of a wide variety of polysaccharides including wood and cotton cellulose [18,21,22], α and β-chitin [23–25], tunicin [18,26], regenerated cellulose [27], glucans, paramylon and…”
ResultShojaeiarani, J., Bajwa, D., & Shirzadifar, A. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.04.033 · Cited by 178
Extreme Light Management in Mesoporous Wood Cellulose Paper for Optoelectronics
Zhu, H., Fang, Z., Wang, Z., Dai, J., Yao, Y., Shen, F., Preston, C., Wu, W., Peng, P., Jang, N., et al. (2016) · ACS Nano · doi:10.1021/acsnano.5b06781 · Cited by 185
Du, H., Liu, C., Mu, X., Gong, W., Lv, D., Hong, Y., Si, C., & Li, B. (2016) · Cellulose · doi:10.1007/s10570-016-0963-5 · Cited by 179
Araki, J. (2013) · Soft Matter · doi:10.1039/c3sm27514k · Cited by 169
Aulin, C., Karabulut, E., Tran, A., Wågberg, L., & Lindström, T. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401700n · Cited by 171
Polylactide cellulose-based nanocomposites
Vatansever, E., Arslan, D., & Nofar, M. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.06.205 · Cited by 173
Printing Porous Carbon Aerogels for Low Temperature Supercapacitors
Yao, B., Peng, H., Zhang, H., Kang, J., Zhu, C., Delgado, G., Byrne, D., Faulkner, S., Freyman, M., Lu, X., et al. (2021) · Nano Letters · doi:10.1021/acs.nanolett.0c04780 · Cited by 174
Jiang, F., Han, S., & Hsieh, Y.-L. (2013) · RSC Advances · doi:10.1039/c3ra41646a · Cited by 171
Hoeger, I., Rojas, O. J., Efimenko, K., Velev, O. D., & Kelley, S. S. (2011) · Soft Matter · doi:10.1039/c0sm01113d · Cited by 171
Sai, H., Xing, L., Xiang, J., Cui, L., Jiao, J., Zhao, C., Li, Z., & Li, F. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11198a · Cited by 172
Majoinen, J., Walther, A., McKee, J. R., Kontturi, E., Aseyev, V., Malho, J. M., Ruokolainen, J., & Ikkala, O. (2011) · Biomacromolecules · doi:10.1021/bm200613y · Cited by 162
Salmieri, S., Islam, F., Khan, R. A., Hossain, F. M., Ibrahim, H. M. M., Miao, C., Hamad, W. Y., & Lacroix, M. (2014) · Cellulose · doi:10.1007/s10570-014-0406-0 · Cited by 165
“CNC can be produced from acid hydrolysis of various natural cellulose fibers such as cotton, lignocellulosic materials, bacteria and tunicate (Iwamoto et al. 2009).”
BackgroundThe Rise of Hierarchical Nanostructured Materials from Renewable Sources: Learning from Nature
Martin-Martinez, F. J., Jin, K., López Barreiro, D., & Buehler, M. J. (2018) · ACS Nano · doi:10.1021/acsnano.8b04379 · Cited by 167
“cellulose nanofibril bundles, while the continuous covalent bonding along the nanofibrils provides outstanding stiffness and strength: ∼ 150 GPa of modulus and ∼ 6 GPa of tensile strength [26], [27].”
BackgroundFujisawa, S., Ikeuchi, T., Takeuchi, M., Saito, T., & Isogai, A. (2012) · Biomacromolecules · doi:10.1021/bm300609c · Cited by 163
Self-citationThe behaviour of cationic NanoFibrillar Cellulose in aqueous media
Olszewska, A., Eronen, P., Johansson, L., Malho, J., Ankerfors, M., Lindström, T., Ruokolainen, J., Laine, J., & Österberg, M. (2011) · Cellulose · doi:10.1007/s10570-011-9577-0 · Cited by 178
“It is known that nanocellulose fibrils possess intrinsically superior mechanical properties, such as high Young modulus of up to 135 GPa, and a high strength in the range of a few GPa’s ( Iwamoto et al. 2009; Yano et al. 2005; Sakurada et al. 1962), which suggests them to be excellent reinforcement agents in bio-based…”
BackgroundLaaksonen, P., Walther, A., Malho, J., Kainlauri, M., Ikkala, O., & Linder, M. B. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201102973 · Cited by 163
Dhar, P., Tarafder, D., Kumar, A., & Katiyar, V. (2015) · RSC Advances · doi:10.1039/c5ra06840a · Cited by 161
Metadata
- Authors
- Iwamoto, S., Kai, W., Isogai, A., & Iwata, T.
- Affiliations
- The University of Tokyo (JP)
- Corresponding author
- Iwata, Tadahisa
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-07-31
- Volume
- 10
- Issue
- 9
- Pages
- 2571-2576
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1972994476
- Cited by
- 754
- References
- 40
- Citations by year
- 2026: 27 · 2025: 30 · 2024: 29 · 2023: 45 · 2022: 67 · 2021: 53 · 2020: 58 · 2019: 59 · 2018: 54 · 2017: 60 · 2016: 51 · 2015: 43 · 2014: 52 · 2013: 47 · 2012: 33
- FWCI
- 11.56
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Japan Society for the Promotion of Science (21228007)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Force Microscopy Techniques and Applications
- Keywords
- cellulose microfibrils, tunicate cellulose, elastic modulus, nanocellulose, TEMPO-oxidized cellulose, sulfuric acid hydrolysis, three-point bending, crystalline cellulose
- MeSH terms
- Animals, Cellulose, Hydrolysis, Urochordata, Microscopy, Atomic Force, Microfibrils, Elastic Modulus
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.