Elastic Modulus of Single Cellulose Microfibrils from Tunicate Measured by Atomic Force Microscopy
The DOI matches its Crossref record; 39 of the 40 references it cites were found in a registry or an index.
Abstract
The elastic modulus of single microfibrils from tunicate ( Halocynthia papillosa ) cellulose was measured by atomic force microscopy (AFM). Microfibrils with cross-sectional dimensions 8 x 20 nm and several micrometers in length were obtained by oxidation of cellulose with 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) as a catalyst and subsequent mechanical disintegration in water and by sulfuric acid hydrolysis. The nanocellulosic materials were deposited on a specially designed silicon wafer with grooves 227 nm in width, and a three-point bending test was applied to determine the elastic modulus using an AFM cantilever. The elastic moduli of single microfibrils prepared by TEMPO-oxidation and acid hydrolysis were 145.2 +/- 31.3 and 150.7 +/- 28.8 GPa, respectively. The result showed that the experimentally determined modulus of the highly crystalline tunicate microfibrils was in agreement with the elastic modulus of native cellulose crystals.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They proposed a value of 145.2 ± 31.3 GPa for microfibrils prepared by TEMPOoxidation and 150.7 ± 28.8 GPa for microfibrils produced by acid hydrolysis [81].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [81]
Citations
Cites
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
Calibration of atomic-force microscope tips
Hutter, J. L., & Bechhoefer, J. (1993) · Review of Scientific Instruments · doi:10.1063/1.1143970 · Cited by 4,194
Nishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493
Self-citationAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Self-citationCellulose: the structure slowly unravels
O'SULLIVAN, A. C. (1997) · Cellulose · doi:10.1023/a:1018431705579 · Cited by 1,499
Elastic and Shear Moduli of Single-Walled Carbon Nanotube Ropes
Salvetat, J.-P., Briggs, G., Bonard, J.-M., Bacsa, R., Kulik, A., Stöckli, T., Burnham, N., & Forró, L. (1999) · Physical Review Letters · doi:10.1103/physrevlett.82.944 · Cited by 1,488
Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation
Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., & Isogai, A. (2009) · Biomacromolecules · doi:10.1021/bm801065u · Cited by 1,271
Self-citationElazzouzi-Hafraoui, S., Nishiyama, Y., Putaux, J.-L., Heux, L., Dubreuil, F., & Rochas, C. (2008) · Biomacromolecules · doi:10.1021/bm700769p · Cited by 1,182
Research works printed but not linked: 3
- Turbak A. F., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 815
- Herrick F. W., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 797
- Xu W., 1994, Scanning Microsc., 8, 499
Cited by
Items 301–400 of 779
Puangsin, B., Fujisawa, S., Kuramae, R., Saito, T., & Isogai, A. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0548-9 · Cited by 40
Self-citationWood Cell Wall Structure and Organisation in Relation to Mechanics
Salmén, L. (2018) · Springer eBooks · doi:10.1007/978-3-319-79099-2_1 · Cited by 40
Fneich, F., Ville, J., Seantier, B., & Aubry, T. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.01.099 · Cited by 40
Sun, H. Y., Bi, H., Ren, Z., Zhou, X., Ji, T., Xu, M., Huang, Z., & Cai, L. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109615 · Cited by 42
Song, J., Tang, A., Liu, T., & Wang, J. (2013) · Nanoscale · doi:10.1039/c3nr33615h · Cited by 42
Chen, Y., Cheng, Q., & Miao, N. (2015) · Thin Solid Films · doi:10.1016/j.tsf.2015.02.049 · Cited by 40
Orientation and interfacial stress transfer of cellulose nanocrystal nanocomposite fibers
Chang, H., Luo, J., Liu, H. C., Davijani, A. A. B., Wang, P., & Kumar, S. (2017) · Polymer · doi:10.1016/j.polymer.2017.01.015 · Cited by 39
Zhao, Y., Troedsson, C., Bouquet, J., Thompson, E. M., Zheng, B., & Wang, M. (2021) · Polymers · doi:10.3390/polym13244346 · Cited by 39
“Due to an extremely high Young’s modulus of 145–150 GPa for tunicate single cellulose fibrils [46] and the high aspect ratio of 163 for CNF in this study, neat CNF films showed good mechanical properties, as indicated by a tensile stress of 121.”
BackgroundFunctional green-based nanomaterials towards sustainable carbon capture and sequestration
Yurdacan, H. M., & Sarı, M. M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-824379-4.00004-5 · Cited by 44
Olszewska, A., Junka, K., Nordgren, N., Laine, J., Rutland, M. W., & Österberg, M. (2013) · Soft Matter · doi:10.1039/c3sm50578b · Cited by 45
Bioinspired lubricating films of cellulose nanofibrils and hyaluronic acid
Valle‐Delgado, J. J., Johansson, L., & Österberg, M. (2015) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2015.11.047 · Cited by 41
Biofilms from micro/nanocellulose of $$\hbox {NaBH}_{4}$$ NaBH 4 -modified kraft pulp
Tozluoğlu, A., Poyraz, B., Candan, Z., Yavuz, M., & Arslan, R. (2017) · Bulletin of Materials Science · doi:10.1007/s12034-017-1416-y · Cited by 39
Maleic acid modified cellulose for scavenging lead from water
Vadakkekara, G. J., Thomas, S., & Nair, C. P. R. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.02.037 · Cited by 38
Huang, J. T., Ma, X., Yang, G., & Dufresne, A. (2019) · Wiley eBooks · doi:10.1002/9783527807437.ch1 · Cited by 42
Chao, F.-C., Wu, M., Chen, L.-C., Lin, H.-L., Liu, D.-Z., Ho, H., & Sheu, M. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115507 · Cited by 38
Chou, C.-T., Shi, S.-C., & Chen, C. (2021) · Polymers · doi:10.3390/polym13244447 · Cited by 40
“Therefore, CNCs and CNFs with Young’s moduli of 110–200 GPa [14,15] and 130–150 GPa [16,17], respectively, have been realized.”
BackgroundHamouda, R. A., Qarabai, F. A. K., Shahabuddin, F. S., Al-Shaikh, T. M., & Makharita, R. R. (2023) · Polymers · doi:10.3390/polym15041047 · Cited by 37
“Nanocellulose is preferable to cellulose due to its high aspect ratio and large surface area [20].”
BackgroundSelf-organizing capacity of nanocelluloses via droplet evaporation
Uetani, K., & Yano, H. (2013) · Soft Matter · doi:10.1039/c3sm27822k · Cited by 41
Wagner, R., Moon, R. J., & Raman, A. (2016) · Cellulose · doi:10.1007/s10570-016-0883-4 · Cited by 41
“2005) and tunicate (Iwamoto et al. 2009), were 78 and 145–150 GPa, respectively.”
BackgroundCai, M., Shafi, S., & Zhao, Y. (2017) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2017.12.015 · Cited by 37
Prado-Martínez, C., Sutton, P., Mombrini, I., Kamtsikakis, A., Meesorn, W., Weder, C., Steiner, U., & Gunkel, I. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta00380a · Cited by 36
REACH Coarse-Grained Simulation of a Cellulose Fiber
Glass, D. C., Moritsugu, K., Cheng, X., & Smith, J. C. (2012) · Biomacromolecules · doi:10.1021/bm300460f · Cited by 36
Hou, Q., Wang, X., & Ragauskas, A. J. (2019) · Cellulose · doi:10.1007/s10570-019-02413-0 · Cited by 36
Reyes, G., Lundahl, M. J., Alejandro-Martín, S., Arteaga-Pérez, L. E., Oviedo, C., King, A. W. T., & Rojas, O. J. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.9b01559 · Cited by 37
Preparation of Silk Nanowhisker-Composited Amphoteric Cellulose/Chitin Nanofiber Membranes
Hu, Y., Liu, L., Yu, J., Wang, Z., & Fan, Y. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00223 · Cited by 36
Kim, D. W., Shin, J., & Choi, S. Q. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116762 · Cited by 36
Dri, F. L., Shang, S., Hector, L. G., Saxe, P. W., Liu, Z., Moon, R. J., & Zavattieri, P. D. (2014) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/22/8/085012 · Cited by 36
Ghosh, S. K., Abdullah, F., & Mukherjee, A. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.10.080 · Cited by 36
Araki, J., & Kurihara, M. (2014) · Biomacromolecules · doi:10.1021/bm5016078 · Cited by 36
Hamou, K. B., Kaddami, H., Dufresne, A., Boufi, S., Magnin, A., & Erchiqui, F. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.043 · Cited by 38
Nanocellulose-Reinforced Adhesives for Wood-Based Panels
Lengowski, E. C., Júnior, E. A. B., Kumode, M. M. N., Carneiro, M. E., & Satyanarayana, K. G. (2019) · Springer eBooks · doi:10.1007/978-3-030-05399-4_35 · Cited by 43
Kobe, R., Yoshitani, K., & Teramoto, Y. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42906 · Cited by 35
Zamil, M. S., Yi, H., Haque, A., & Puri, V. M. (2013) · American Journal of Botany · doi:10.3732/ajb.1200649 · Cited by 35
Nanocellulose—fabrication, structure, properties, and application in the area of care and cure
Ioelovich, M. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-41533-0.00009-x · Cited by 40
Uto, T., Mawatari, S., & Yui, T. (2014) · The Journal of Physical Chemistry B · doi:10.1021/jp503535d · Cited by 36
Zhang, H., Wu, Y., Zhang, J., Wu, Z., & Zhan, X. (2022) · Industrial Crops and Products · doi:10.1016/j.indcrop.2022.115781 · Cited by 34
Steric Stabilization of “Charge-Free” Cellulose Nanowhiskers by Grafting of Poly(ethylene glycol)
Araki, J., & Mishima, S. (2014) · Molecules · doi:10.3390/molecules20010169 · Cited by 35
“The Young’s moduli of tunicin cellulose nanowhiskers and squid pen chitin nanowhiskers are both estimated as 150 GPa from a bending test using an atomic force microscope [18] and a calculation from the moduli of nanocomposites [19], respectively.”
MethodCellulose nanofibrils as templates for the design of poly(l-lactide)-nucleating surfaces
Fujisawa, S., Zhang, J., Saito, T., Iwata, T., & Isogai, A. (2014) · Polymer · doi:10.1016/j.polymer.2014.04.019 · Cited by 34
Self-citationRole of integrin α7β1 signaling in myoblast differentiation on aligned polydioxanone scaffolds
McClure, M. J., Clark, N. M., Hyzy, S. L., Chalfant, C. E., Olivares‐Navarrete, R., Boyan, B. D., & Schwartz, Z. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.04.046 · Cited by 36
“Studies have demonstrated that fiber diameter and polymer composition are important determinants of single fiber stiffness [33,34].”
BackgroundJiang, E., Amiralian, N., Maghe, M., Laycock, B. G., McFarland, E. W., Fox, B. L., Martin, D. J., & Annamalai, P. K. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b03144 · Cited by 33
Elastic moduli of biological fibers in a coarse-grained model: crystalline cellulose and β-amyloids
Poma, A. B., Chwastyk, M., & Cieplak, M. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp05269c · Cited by 33
Methylcellulose–Cellulose Nanocrystal Composites for Optomechanically Tunable Hydrogels and Fibers
Hynninen, V., Patrakka, J., & Nonappa, N. (2021) · Materials · doi:10.3390/ma14185137 · Cited by 35
“However, significantly higher moduli and maximum stress have been reported; highly aligned CNF-based fibers prepared by Mittal et al. have reached an elastic modulus of 86 GPa and maximum stress of 1.57 GPa [49,115].”
BackgroundInfluentialQiu, C., Zhu, K., Yang, W., Wang, Y., Zhang, L., Chen, F., & Fu, Q. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01262 · Cited by 33
Thermal conduction through individual cellulose nanofibers
Adachi, K., Daicho, K., Furuta, M., Shiga, T., Saito, T., & Kodama, T. (2021) · Applied Physics Letters · doi:10.1063/5.0042463 · Cited by 33
Fukui, S., Ito, T., Saito, T., Noguchi, T., & Isogai, A. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.08.023 · Cited by 32
Self-citationNoguchi, T., Niihara, K., Kurashima, A., Iwamoto, R., Miura, T., Koyama, A., Endo, M., Marubayashi, H., Kumagai, A., Jinnai, H., et al. (2021) · Composites Science and Technology · doi:10.1016/j.compscitech.2021.108815 · Cited by 32
Self-citationMalho, J., Ouellet‐Plamondon, C., Rüggeberg, M., Laaksonen, P. H., Ikkala, O. T., Burgert, I., & Linder, M. B. (2014) · Biomacromolecules · doi:10.1021/bm501514w · Cited by 33
Physical and mechanical properties of a vegetable oil based nanocomposite
Buffa, J. M., Mondragón, G., Corcuera, M. Á., Eceiza, A., Mucci, V., & Aranguren, M. I. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.10.035 · Cited by 32
Olszewska, A., Valle‐Delgado, J. J., Nikinmaa, M., Laine, J., & Österberg, M. (2013) · Nanoscale · doi:10.1039/c3nr03091a · Cited by 35
Horikawa, Y., TSUSHIMA, R., Noguchi, K., Nakaba, S., & Funada, R. (2020) · Journal of Wood Science · doi:10.1186/s10086-020-01884-1 · Cited by 33
Patterson, G. D., & Hsieh, Y. (2020) · Nanoscale Advances · doi:10.1039/d0na00771d · Cited by 31
A review of converting woody biomass waste into useful and eco-friendly road materials
Zhang, X., Li, H., Harvey, J., Butt, A. A., Jia, M. Q., & Liu, J. (2022) · Transportation Safety and Environment · doi:10.1093/tse/tdab031 · Cited by 35
Guan, F., & Guo, C. F. (2022) · Soft Science · doi:10.20517/ss.2021.19 · Cited by 35
Cellulose Nanocrystals Examined by Atomic Force Microscopy: Applications and Fundamentals
Moud, A. A. (2022) · ACS Food Science & Technology · doi:10.1021/acsfoodscitech.2c00289 · Cited by 32
Kontomaris, S. V., Stylianou, A., Chliveros, G., & Malamou, A. (2023) · Fibers · doi:10.3390/fib11100083 · Cited by 31
“In most of the cases of three-point bending studies, fibers are assumed to be double-clamped due to sufficient fiber–substrate adhesion [117,118] or double-clamped conditions are enforced with additional experimental measures [119,120].”
BackgroundReinforcement of Polymeric Submicrometer‐sized Fibers by Microfibrillated Cellulose
Fortunato, G., Zimmermann, T., Lübben, J. F., Bordeanu, N., & Hufenus, R. (2012) · Macromolecular Materials and Engineering · doi:10.1002/mame.201100408 · Cited by 33
Wang, J., Chen, X., Zhang, C., Akbar, A. R., Shi, Z., Yang, Q., & Xiong, C. (2019) · Cellulose · doi:10.1007/s10570-019-02302-6 · Cited by 31
Shape tunability of carbonized cellulose nanocrystals
Bartoli, M., Giorcelli, M., Jagdale, P., Rovere, M., Tagliaferro, A., Chae, M. S., & Bressler, D. C. (2019) · SN Applied Sciences · doi:10.1007/s42452-019-1727-2 · Cited by 32
Tanaka, R., Kuribayashi, T., Ogawa, Y., Saito, T., Isogai, A., & Nishiyama, Y. (2017) · Cellulose · doi:10.1007/s10570-017-1334-6 · Cited by 30
“CNCs have high crystal moduli (Sakurada et al. 1962; Šturcová et al. 2005; Iwamoto et al. 2009; Wohlert et al. 2012), high tensile strengths (Saito et al. 2013), and making them attractive candidates as reinforcing fillers in polymer nanocomposites (Azizi Samir et al. 2005; Habibi et al. 2010;…”
BackgroundSelf-citationEffects of Fiber Angle on the Tensile Properties of Partially Delignified and Densified Wood
Jakob, M., Gaugeler, J., & Gindl‐Altmutter, W. (2020) · Materials · doi:10.3390/ma13235405 · Cited by 31
Nilsson, H., Galland, S., Larsson, P. T., Gamstedt, E. K., & Iversen, T. (2012) · Cellulose · doi:10.1007/s10570-012-9688-2 · Cited by 30
“Biocomposites based on acid sulfite dissolving grade pulp or sulfite paper grade pulp exhibit twice as high Young’s modulus as the composite based on paper grade kraft pulp, 11–12 and 6 GPa, respectively.”
BackgroundInfluentialMeasurement of the elastic modulus of spider mite silk fibers using atomic force microscopy
Hudson, S. D., Zhurov, V. V., Grbić, V., Grbić, M., & Hutter, J. L. (2013) · Journal of Applied Physics · doi:10.1063/1.4800865 · Cited by 30
Degradation of TEMPO-oxidized cellulose fibers and nanofibrils by crude cellulase
Homma, I., Isogai, T., Saito, T., & Isogai, A. (2013) · Cellulose · doi:10.1007/s10570-013-9872-z · Cited by 30
“MFCs and NCCs have high crystallinities, nano-scale widths, high Young’s moduli (Iwamoto et al. 2009), low thermal expansion coefficients (Nishino et al.”
BackgroundSelf-citationOrientation and deformation of wet-stretched all-cellulose nanocomposites
Pullawan, T., Wilkinson, A. N., & Eichhorn, S. J. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7404-8 · Cited by 30
Huang, W. (2017) · Elsevier eBooks · doi:10.1016/b978-0-323-48019-2.00005-0 · Cited by 35
Sodium itaconate grafted nanocellulose for facile elimination of lead ion from water
Vadakkekara, G. J., Thomas, S., & Nair, C. P. R. (2020) · Cellulose · doi:10.1007/s10570-020-02983-4 · Cited by 29
“The TEM image shows in typical rod like (Dujardin et al. 2003; Iwamoto et al. 2009) and explicit layered structure.”
BackgroundCai, C., Wei, Z., Huang, Y., Wang, P., Song, J., Deng, L., & Fu, Y. (2020) · Cellulose · doi:10.1007/s10570-020-03484-0 · Cited by 29
Tian, C., Fu, S., Meng, Q., & Lucia, L. A. (2016) · Cellulose · doi:10.1007/s10570-016-0980-4 · Cited by 28
“Cellulose nanocrystals (CNCs), prepared by acid hydrolysis of natural cellulosics, display many remarkable aspects including high specific surface area, low thermal expansibility, and high Young’s modulus (*150 GPa), that endow them with potentially very desirable reinforcement traits (Iwamoto et al. 2009; Lin et al.…”
BackgroundPylkkänen, R., Mohammadi, P., Arola, S., de Ruijter, J. C., Sunagawa, N., Igarashi, K., & Penttilä, M. E. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c01162 · Cited by 29
The emergence of hybrid cellulose nanomaterials as promising biomaterials
Las‐Casas, B., Dias, I. K. R., Yupanqui-Mendoza, S. L., Pereira, B., Costa, G. R., Rojas, O. J., & Arantes, V. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126007 · Cited by 30
Intrinsic viscosity of suspensions of electrosterically stabilized nanocrystals of cellulose
Lenfant, G., Heuzey, M., van de Ven, T. G. M., & Carreau, P. J. (2015) · Cellulose · doi:10.1007/s10570-015-0573-7 · Cited by 28
“One of the main benefits of such nanoparticles is their high elastic modulus with values up to 143 GPa for nanocrystals (NCCs) (Sturcova et al. 2005) and 145 GPa for nanofibers (CNFs) (Iwamoto et al. 2009).”
BackgroundBio‐based Nanomaterials and Their Bionanocomposites
Bagal-Kestwal, D., Kestwal, R. M., & Chiang, B. (2016) · Wiley eBooks · doi:10.1002/9783527683772.ch8 · Cited by 30
Assessing stiffness of nanofibres in bacterial cellulose hydrogels: Numerical-experimental framework
Gao, X., Sözümert, E., Shi, Z., Yang, G., & Silberschmidt, V. V. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.03.231 · Cited by 28
“uk Considering a diameter of nanofibres, atomic-force-microscopy (AFM) based tests, such as nano-tension [18], nano-bending [19,20], nanoindentation [21], together with custom-made nano-testing systems [22, 23] were employed instead of commercial mechanical-testing systems.”
MethodSuzuki, K., Homma, Y., Igarashi, Y., Okumura, H., & Yano, H. (2017) · Cellulose · doi:10.1007/s10570-017-1355-1 · Cited by 28
“…is naturally produced as the crystalline nanofibers, cellulose micro-fibrils, with a high elastic modulus (134 GPa; Sakurada et al. 1962, 151GPa; Iwamoto et al. 2009), strength (1.6–3 GPa; Page and ElHosseiny 1983; Saito et al. 2012), and a low coefficient of thermal expansion (Nishino et al.…”
BackgroundInfluentialIwamoto, S., Saito, Y., Yagishita, T., Kumagai, A., & Endo, T. (2019) · Cellulose · doi:10.1007/s10570-019-02408-x · Cited by 28
Self-citationEffect of nanocellulose on mechanical properties of cementitious composites – A review
Withana, H., Rawat, S., & Zhang, Y. X. (2024) · Advanced Nanocomposites · doi:10.1016/j.adna.2024.05.003 · Cited by 27
Okahashi, K., Takeuchi, M., Zhou, Y., Ono, Y., Fujisawa, S., Saito, T., & Isogai, A. (2021) · Cellulose · doi:10.1007/s10570-021-03897-5 · Cited by 27
“…(PVA) and polyacrylamide (PAM) were used as the aqueous solutions, the TEMPO-CNF/ PVA and TEMPO-CNF/PAM composite films prepared from the aqueous mixtures by the casting and drying method exhibited little nano-reinforcing effect at TEMPO-CNF contents of \ 5% (Kurihara and Isogai 2014, 2015).”
BackgroundMethodSelf-citationCellulose and its Derivatives: Properties and Applications
Delucis, R. D. Á., de Cademartori, P. H. G., Fajardo, A. R., & Amico, S. C. (2021) · Wiley eBooks · doi:10.1002/9781119711414.ch11 · Cited by 32
Miao, C., Mauran, D., & Hamad, W. Y. (2022) · Soft Matter · doi:10.1039/d2sm00140c · Cited by 29
Araki, J., & Yamanaka, Y. (2014) · Polymers for Advanced Technologies · doi:10.1002/pat.3361 · Cited by 28
Zhang, S., Tanioka, A., Okamoto, M., Haraoka, Y., Hayashi, N., & Matsumoto, H. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c00374 · Cited by 27
Graninger, G., Kumar, S., Garrett, G., & Falzon, B. G. (2020) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2020.106103 · Cited by 28
Jiao, H., Sun, J., Shi, Y., Lu, X., Ali, S. S., Fu, Y., Zhang, H., Li, Y., Wang, Q., Zhou, M., et al. (2023) · Cellulose · doi:10.1007/s10570-023-05302-9 · Cited by 26
Hang, C., Zhang, C., Guan, Q., Ye, L., Su, Y., & Yu, S. (2024) · Advanced Materials · doi:10.1002/adma.202414904 · Cited by 26
Nanocellulose-Polymer Composites: Novel Materials for Food Packaging Applications
Bharimalla, A. K., Patil, P. G., Mukherjee, S., Yadav, V., & Prasad, V. (2019) · Springer eBooks · doi:10.1007/978-3-030-19416-1_27 · Cited by 32
Josefsson, G., Tanem, B. S., Li, Y., Vullum, P. E., & Gamstedt, E. K. (2013) · Cellulose · doi:10.1007/s10570-013-9868-8 · Cited by 26
Doubly curved nanofiber-reinforced optically transparent composites
Shams, M. I., & Yano, H. (2015) · Scientific Reports · doi:10.1038/srep16421 · Cited by 26
Martoïa, F., Dumont, P., Orgéas, L., Belgacem, M. N., & Putaux, J. (2016) · RSC Advances · doi:10.1039/c6ra07176g · Cited by 26
Solid mechanics of the torus–margo in conifer intertracheid bordered pits
Schulte, P. J., & Hacke, U. G. (2020) · New Phytologist · doi:10.1111/nph.16949 · Cited by 26
Das, L., Das, P., Bhowal, A., & Bhattacharjee, C. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-14026-x · Cited by 27
“…owing to its biodegradability, high specific surface area, biocompatibility, high thermal stability, non-toxicity, high water solubility, renewability, and abundant availability, and they are relatively inexpensive (Iwamoto et al. 2009; Habibi et al. 2010; Lin and Dufresne 2014; Wang et al. 2016).”
BackgroundChen, N., Tong, Z., Yang, W. W., & Brennan, A. B. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.04.015 · Cited by 25
SEC-MALLS analysis of TEMPO-oxidized celluloses using methylation of carboxyl groups
Hiraoki, R., Fukuzumi, H., Ono, Y., Saito, T., & Isogai, A. (2013) · Cellulose · doi:10.1007/s10570-013-0090-5 · Cited by 25
“…wood celluloses have quite small and homogeneous widths of *3 nm, high aspect ratios of [100, high tensile strengths (2–3 GPa), and high elastic moduli (*140 GPa), so TOCNs are expected to have applications as new bio-based nanomaterials (Isogai et al. 2011; Iwamoto et al. 2009; Saito et al. 2013).”
BackgroundSelf-citationJin, H., Cao, A., Shi, E., Seitsonen, J. J. T., Zhang, L., Ras, R. H. A., Berglund, L. A., Ankerfors, M., Walther, A., & Ikkala, O. T. (2012) · Journal of Materials Chemistry B · doi:10.1039/c2tb00370h · Cited by 25
Fujisawa, S., Togawa, E., & Hayashi, N. (2015) · Journal of Wood Science · doi:10.1007/s10086-015-1533-4 · Cited by 26
Measurement of the flexibility of wet cellulose fibres using atomic force microscopy
Pettersson, T., Hellwig, J., Gustafsson, P.-J., & Stenström, S. (2017) · Cellulose · doi:10.1007/s10570-017-1407-6 · Cited by 26
“by Iwamoto et al. (2009) to determine the elastic modulus of cellulose microfibrils from tunicate.”
BackgroundMethodCellulose nanofillers for food packaging
Olsson, R. T., Fogelström, L., Martínez‐Sanz, M., & Henriksson, M. (2011) · Elsevier eBooks · doi:10.1533/9780857092786.1.86 · Cited by 25
Microfibrillated Cellulose Suspension and Its Electrorheology
Choi, K., Nam, J. D., Kwon, S. H., Choi, H. J., Islam, M. S., & Kao, N. (2019) · Polymers · doi:10.3390/polym11122119 · Cited by 24
Hambardzumyan, A., Vayer, M., Foulon, L., Pernes, M., Devers, T., Bigarré, J., & Aguié‐Béghin, V. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-06921-6 · Cited by 24
“from [54, 55] [56] as in [42] J Mater Sci (2022) 57:4684–4703 4687”
Bai, H., Li, Y., Zhang, S., Ma, P., & Dong, W. (2022) · Cellulose · doi:10.1007/s10570-022-04760-x · Cited by 24
“2018), due to its superb mechanical properties (Iwamoto et al. 2009; Eichhorn et al. 2010) and excellent biodegradability as well as biocompatibility.”
BackgroundIto, T., Daicho, K., Fujisawa, S., Saito, T., & Kobayashi, K. (2022) · Nanoscale Horizons · doi:10.1039/d2nh00355d · Cited by 24
Metadata
- Authors
- Iwamoto, S., Kai, W., Isogai, A., & Iwata, T.
- Affiliations
- The University of Tokyo (JP)
- Corresponding author
- Iwata, Tadahisa
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-07-31
- Volume
- 10
- Issue
- 9
- Pages
- 2571-2576
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1972994476
- Cited by
- 754
- References
- 40
- Citations by year
- 2026: 27 · 2025: 30 · 2024: 29 · 2023: 45 · 2022: 67 · 2021: 53 · 2020: 58 · 2019: 59 · 2018: 54 · 2017: 60 · 2016: 51 · 2015: 43 · 2014: 52 · 2013: 47 · 2012: 33
- FWCI
- 11.56
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Japan Society for the Promotion of Science (21228007)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Force Microscopy Techniques and Applications
- Keywords
- cellulose microfibrils, tunicate cellulose, elastic modulus, nanocellulose, TEMPO-oxidized cellulose, sulfuric acid hydrolysis, three-point bending, crystalline cellulose
- MeSH terms
- Animals, Cellulose, Hydrolysis, Urochordata, Microscopy, Atomic Force, Microfibrils, Elastic Modulus
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.