The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Challenges for Rechargeable Li Batteries
Abstract
The challenges for further development of Li rechargeable batteries for electric vehicles are reviewed. Most important is safety, which requires development of a nonflammable electrolyte with either a larger window between its lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) or a constituent (or additive) that can develop rapidly a solid/electrolyte-interface (SEI) layer to prevent plating of Li on a carbon anode during a fast charge of the battery. A high Li + -ion conductivity (σ Li > 10 −4 S/cm) in the electrolyte and across the electrode/electrolyte interface is needed for a power battery. Important also is an increase in the density of the stored energy, which is the product of the voltage and capacity of reversible Li insertion/extraction into/from the electrodes. It will be difficult to design a better anode than carbon, but carbon requires formation of an SEI layer, which involves an irreversible capacity loss. The design of a cathode composed of environmentally benign, low-cost materials that has its electrochemical potential μ C well-matched to the HOMO of the electrolyte and allows access to two Li atoms per transition-metal cation would increase the energy density, but it is a daunting challenge. Two redox couples can be accessed where the cation redox couples are “pinned” at the top of the O 2p bands, but to take advantage of this possibility, it must be realized in a framework structure that can accept more than one Li atom per transition-metal cation. Moreover, such a situation represents an intrinsic voltage limit of the cathode, and matching this limit to the HOMO of the electrolyte requires the ability to tune the intrinsic voltage limit. Finally, the chemical compatibility in the battery must allow a long service life.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Self-citationNonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
High-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
Nanomaterials for Rechargeable Lithium Batteries
Bruce, P. G., Scrosati, B., & Tarascon, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702505 · Cited by 5,886
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Self-citationNanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
Self-citationScrosati, B., Magistris, A., Mari, C. M., & Mariotto, G. (1993) · Springer eBooks · doi:10.1007/978-94-011-1916-0 · Cited by 2,218
Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
Cited by
Items 301–400 of 578
Block copolymer electrolytes for rechargeable lithium batteries
Young, W., Kuan, W., & Epps (2014) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23404 · Cited by 417
Langmuir–Blodgett artificial solid-electrolyte interphases for practical lithium metal batteries
Kim, M. S., Ryu, J.-H., Deepika, Lim, Y. R., Nah, I. W., Lee, K.-R., Archer, L. A., & Il Cho, W. (2018) · Nature Energy · doi:10.1038/s41560-018-0237-6 · Cited by 417
Advent of 2D Rhenium Disulfide (ReS2): Fundamentals to Applications
Rahman, M., Davey, K., & Qiao, S. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606129 · Cited by 416
The discharge rate capability of rechargeable Li–O2 batteries
Lu, Y.-C., Kwabi, D. G., Yao, K. P. C., Harding, J. R., Zhou, J., Zuin, L., & Shao-Horn, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01500a · Cited by 415
Wang, H., Yang, Y., Liang, Y., Zheng, G., Li, Y., Cui, Y., & Dai, H. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21746e · Cited by 415
Hu, L., Ren, Y., Yang, H., & Xu, Q. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503995s · Cited by 414
Na 3 V 2 (PO 4 ) 3 @C core–shell nanocomposites for rechargeable sodium-ion batteries
Duan, W., Zhu, Z., Li, H., Hu, Z., Zhang, K., Cheng, F., & Chen, J. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00106k · Cited by 411
Li, Y., Huang, Z., Kalambate, P. K., Zhong, Y., Huang, Z., Xie, M., Shen, Y., & Huang, Y. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.04.009 · Cited by 411
A high capacity small molecule quinone cathode for rechargeable aqueous zinc-organic batteries
Lin, Z., Shi, H.-Y., Lin, L., Yang, X., Wu, W., & Sun, X. (2021) · Nature Communications · doi:10.1038/s41467-021-24701-9 · Cited by 411
Wang, H., Sheng, L., Yasin, G., Wang, L., Xu, H., & He, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.08.014 · Cited by 410
Wang, H., Liang, Y., Gong, M., Li, Y., Chang, W., Mefford, T., Zhou, J., Wang, J., Regier, T., Wei, F., et al. (2012) · Nature Communications · doi:10.1038/ncomms1921 · Cited by 409
Electrically conductive hydrogels for flexible energy storage systems
Zhang, W., Feng, P., Chen, J., Sun, Z., & Zhao, B. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.09.001 · Cited by 409
Novel Three‐Dimensional Mesoporous Silicon for High Power Lithium‐Ion Battery Anode Material
Jia, H., Gao, P., Yang, J., Wang, J., Nuli, Y., & Yang, Z. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100485 · Cited by 408
Hollow Iron Oxide Nanoparticles for Application in Lithium Ion Batteries
Koo, B., Xiong, H., Slater, M. D., Prakapenka, V. B., Balasubramanian, M., Podsiadlo, P., Johnson, C. S., Rajh, T., & Shevchenko, E. V. (2012) · Nano Letters · doi:10.1021/nl3004286 · Cited by 407
Xie, Y., Chen, Y., Liu, L., Tao, P., Fan, M., Xu, N., Shen, X., & Yan, C. (2017) · Advanced Materials · doi:10.1002/adma.201702268 · Cited by 405
Hollow Porous SiO2 Nanocubes Towards High-performance Anodes for Lithium-ion Batteries
Yan, N., Wang, F., Zhong, H., Li, Y., Wang, Y., Hu, L., & Chen, Q. (2013) · Scientific Reports · doi:10.1038/srep01568 · Cited by 404
Advanced Separators for Lithium‐Ion and Lithium–Sulfur Batteries: A Review of Recent Progress
Xiang, Y., Li, J., Lei, J., Liu, D., Xie, Z., Qu, D., Li, K., Deng, T., & Tang, H. (2016) · ChemSusChem · doi:10.1002/cssc.201600943 · Cited by 404
Zhao, R., Yang, Y., Liu, G., Zhu, R., Huang, J., Chen, Z., Gao, Z., Chen, X., & Qie, L. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202001867 · Cited by 402
Emerging beyond-graphene elemental 2D materials for energy and catalysis applications
Fan, F. R., Wang, R., Zhang, H., & Wu, W. (2021) · Chemical Society Reviews · doi:10.1039/c9cs00821g · Cited by 402
High temperature electrical energy storage: advances, challenges, and frontiers
Lin, X., Salari, M., Arava, L. M. R., Ajayan, P. M., & Grinstaff, M. W. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00012f · Cited by 401
Improving battery safety by early detection of internal shorting with a bifunctional separator
Wu, H., Zhuo, D., Kong, D., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6193 · Cited by 400
Zhu, J., Zhang, Z., Zhao, S., Westover, A. S., Belharouak, I., & Cao, P. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003836 · Cited by 399
Li, D., Chen, L., Wang, T., & Fan, L.-Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18123 · Cited by 398
Computation-Accelerated Design of Materials and Interfaces for All-Solid-State Lithium-Ion Batteries
Nolan, A. M., Zhu, Y., He, X., Bai, Q., & Mo, Y. (2018) · Joule · doi:10.1016/j.joule.2018.08.017 · Cited by 398
Lithium-ion battery aging mechanisms and life model under different charging stresses
Gao, Y., Jiang, J., Zhang, C., Zhang, W., Ma, Z., & Jiang, Y. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.04.084 · Cited by 397
Qian, J., Liu, L., Yang, J., Li, S., Wang, X., Zhuang, H. L., & Lu, Y. (2018) · Nature Communications · doi:10.1038/s41467-018-07296-6 · Cited by 397
Kinetics Tuning of Li-Ion Diffusion in Layered Li(NixMnyCoz)O2
Wei, Y., Zheng, J., Cui, S., Song, X., Su, Y., Deng, W., Wu, Z., Wang, X., Wang, W., Rao, M., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04040 · Cited by 395
Fast Charging Lithium Batteries: Recent Progress and Future Prospects
Zhu, G., Zhao, C., Huang, J., He, C., Zhang, J., Chen, S., Xu, L., Yuan, H., & Zhang, Q. (2019) · Small · doi:10.1002/smll.201805389 · Cited by 395
The passivity of lithium electrodes in liquid electrolytes for secondary batteries
He, X., Bresser, D., Passerini, S., Baakes, F., Krewer, U., Lopez, J., Mallia, C. T., Shao-Horn, Y., Cekic-Laskovic, I., Wiemers-Meyer, S., et al. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00345-5 · Cited by 393
The Detrimental Effects of Carbon Additives in Li10GeP2S12-Based Solid-State Batteries
Zhang, W., Leichtweiß, T., Culver, S. P., Koerver, R., Das, D., Weber, D. A., Zeier, W. G., & Janek, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11530 · Cited by 392
Electrochemical Window of the Li-Ion Solid Electrolyte Li7La3Zr2O12
Thompson, T., Yu, S., Williams, L., Schmidt, R. D., Garcia-Mendez, R., Wolfenstine, J., Allen, J. L., Kioupakis, E., Siegel, D. J., & Sakamoto, J. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00593 · Cited by 391
Bak, S.-M., Nam, K.-W., Chang, W., Yu, X., Hu, E., Hwang, S., Stach, E. A., Kim, K.-B., Chung, K. Y., & Yang, X.-Q. (2013) · Chemistry of Materials · doi:10.1021/cm303096e · Cited by 390
Nam, Y. J., Oh, D. Y., Jung, S. H., & Jung, Y. S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.031 · Cited by 390
Revisiting the Roles of Natural Graphite in Ongoing Lithium‐Ion Batteries
Zhao, L., Ding, B., Qin, X., Wang, Z., Lv, W., He, Y., Yang, Q., & Kang, F. (2022) · Advanced Materials · doi:10.1002/adma.202106704 · Cited by 390
Emerging electrolytes with fluorinated solvents for rechargeable lithium-based batteries
Wang, Y., Li, Z., Hou, Y., Hao, Z., Zhang, Q., Ni, Y., Lu, Y., Yan, Z., Zhang, K., Zhao, Q., et al. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00873d · Cited by 390
Interphases in Sodium‐Ion Batteries
Song, J., Xiao, B., Lin, Y., Xu, K., & Li, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703082 · Cited by 389
The Compensation Effect in the Vogel–Tammann–Fulcher (VTF) Equation for Polymer-Based Electrolytes
Diederichsen, K. M., Buss, H. G., & McCloskey, B. D. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b00423 · Cited by 386
Ren, W., Ding, C., Fu, X., & Huang, Y. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.018 · Cited by 385
Li, J.-Y., Xu, Q., Li, G., Yin, Y.-X., Wan, L.-J., & Guo, Y.-G. (2017) · Materials Chemistry Frontiers · doi:10.1039/c6qm00302h · Cited by 384
Wang, D., Jiang, S., Duan, C., Mao, J., Dong, Y., Dong, K., Wang, Z., Luo, S., Liu, Y., & Qi, X. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.156158 · Cited by 383
Ultrasonic Scanning to Observe Wetting and “Unwetting” in Li-Ion Pouch Cells
Deng, Z., Huang, Z., Shen, Y., Huang, Y., Ding, H., Luscombe, A., Johnson, M., Harlow, J. E., Gauthier, R., & Dahn, J. R. (2020) · Joule · doi:10.1016/j.joule.2020.07.014 · Cited by 383
Micro‐ and Nano‐Structured Vanadium Pentoxide (V2O5) for Electrodes of Lithium‐Ion Batteries
Yue, Y., & Liang, H. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602545 · Cited by 382
Key Aspects of Lithium Metal Anodes for Lithium Metal Batteries
Ghazi, Z. A., Sun, Z., Sun, C., Qi, F., An, B., Li, F., & Cheng, H. (2019) · Small · doi:10.1002/smll.201900687 · Cited by 382
Nitrogen-Deficient Graphitic Carbon Nitride with Enhanced Performance for Lithium Ion Battery Anodes
Chen, J., Mao, Z., Zhang, L., Wang, D., Xu, R., Bie, L., & Fahlman, B. D. (2017) · ACS Nano · doi:10.1021/acsnano.7b07116 · Cited by 381
Interface Engineering for Lithium Metal Anodes in Liquid Electrolyte
Zhai, P., Liu, L., Gu, X., Wang, T., & Gong, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001257 · Cited by 380
Interfacing electrolytes with electrodes in Li ion batteries
Xu, K., & von Cresce, A. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04309e · Cited by 380
Li, W., Zheng, G., Yang, Y., Seh, Z. W., Liu, N., & Cui, Y. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1220992110 · Cited by 379
Lim, S. Y., Kim, H., Shakoor, R. A., Jung, Y., & Choi, J. W. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.015209jes · Cited by 379
An overview of global power lithium-ion batteries and associated critical metal recycling
Miao, Y., Liu, L., Zhang, Y., Tan, Q., & Li, J. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.127900 · Cited by 379
Lithium Superionic Sulfide Cathode for All-Solid Lithium–Sulfur Batteries
Lin, Z., Liu, Z., Dudney, N. J., & Liang, C. (2013) · ACS Nano · doi:10.1021/nn400391h · Cited by 378
Pu, X., Hu, W., & Wang, Z. L. (2018) · Small · doi:10.1002/smll.201702817 · Cited by 378
Nanosheet‐Constructed Porous TiO2–B for Advanced Lithium Ion Batteries
Liu, S., Jia, H., Han, L., Wang, J., Gao, P., Xu, D., Yang, J., & Che, S. (2012) · Advanced Materials · doi:10.1002/adma.201201036 · Cited by 377
Mitigation strategies for Li-ion battery thermal runaway: A review
Xu, B., Lee, J., Kwon, D., Kong, L., & Pecht, M. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111437 · Cited by 377
M. Gür, T. (2018) · Energy & Environmental Science · doi:10.1039/c8ee90053a · Cited by 374
Recent advances in Li1+xAlxTi2−x(PO4)3 solid-state electrolyte for safe lithium batteries
Xiao, W., Wang, J., Fan, L., Zhang, J., & Li, X. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.10.012 · Cited by 374
Comprehensive review of lithium-ion battery materials and development challenges
Nasajpour-Esfahani, N., Garmestani, H., Bagheritabar, M., Jasim, D. J., Toghraie, D., Dadkhah, S., & Firoozeh, H. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.114783 · Cited by 374
A survey of methods for monitoring and detecting thermal runaway of lithium-ion batteries
Liao, Z., Zhang, S., Li, K., Zhang, G., & Habetler, T. G. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.226879 · Cited by 373
Conversion reactions for sodium-ion batteries
Klein, F., Jache, B., Bhide, A., & Adelhelm, P. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp52125g · Cited by 370
Spongelike Nanosized Mn3O4 as a High-Capacity Anode Material for Rechargeable Lithium Batteries
Gao, J., Lowe, M. A., & Abruña, H. D. (2011) · Chemistry of Materials · doi:10.1021/cm201039w · Cited by 370
Wang, Q., Zou, R., Xia, W., Ma, J., Qiu, B., Mahmood, A., Zhao, R., Yang, Y., Xia, D., & Xu, Q. (2015) · Small · doi:10.1002/smll.201403579 · Cited by 370
Energetics Systems and artificial intelligence: Applications of industry 4.0
Ahmad, T., Zhu, H., Zhang, D., Tariq, R., Bassam, A., Ullah, F., AlGhamdi, A. S., & Alshamrani, S. S. (2022) · Energy Reports · doi:10.1016/j.egyr.2021.11.256 · Cited by 369
Effect of Ni2+ Content on Lithium/Nickel Disorder for Ni-Rich Cathode Materials
Wu, F., Tian, J., Su, Y., Wang, J., Zhang, C., Bao, L., He, T., Li, J., & Chen, S. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00645 · Cited by 369
Silicon nanowires for Li-based battery anodes: a review
Zamfir, M. R., Nguyen, H. T., Moyen, E., Lee, Y. H., & Pribat, D. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11714f · Cited by 368
Xie, J., Sendek, A. D., Cubuk, E. D., Zhang, X., Lu, Z., Gong, Y., Wu, T., Shi, F., Liu, W., Reed, E. J., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b02561 · Cited by 368
Recent advances in rational design for high-performance potassium-ion batteries
Xu, Y., Du, Y., Chen, H., Chen, J., Ding, T., Sun, D., Kim, D. H., Lin, Z., & Zhou, X. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00601h · Cited by 367
Guo, B., Yu, X., Sun, X.-G., Chi, M., Qiao, Z.-A., Liu, J., Hu, Y.-S., Yang, X.-Q., Goodenough, J. B., & Dai, S. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00508b · Cited by 366
Self-citationZhao, Y., & Burda, C. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02734d · Cited by 365
A Review on the Features and Progress of Dual‐Ion Batteries
Wang, M., & Tang, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703320 · Cited by 363
Progress in Solid Polymer Electrolytes for Lithium‐Ion Batteries and Beyond
An, Y., Han, X., Liu, Y., Azhar, A., Na, J., Nanjundan, A. K., Wang, S., Yu, J., & Yamauchi, Y. (2022) · Small · doi:10.1002/smll.202103617 · Cited by 363
Safe and fast-charging Li-ion battery with long shelf life for power applications
Zaghib, K., Dontigny, M., Guerfi, A., Charest, P., Rodrigues, I., Mauger, A., & Julien, C. M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.093 · Cited by 363
Jiang, Y., Yang, Z., Li, W., Zeng, L., Pan, F., Wang, M., Wei, X., Hu, G., Gu, L., & Yu, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402104 · Cited by 362
Wang, X., Li, G., Li, J., Zhang, Y., Wook, A., Yu, A., & Chen, Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00194g · Cited by 360
Lithium Nitrate Regulated Sulfone Electrolytes for Lithium Metal Batteries
Fu, J., Ji, X., Chen, J., Chen, L., Fan, X., Mu, D., & Wang, C. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202009575 · Cited by 358
Schulze, M. W., McIntosh, L. D., Hillmyer, M. A., & Lodge, T. P. (2014) · Nano Letters · doi:10.1021/nl4034818 · Cited by 356
Porous Carbon Composites for Next Generation Rechargeable Lithium Batteries
Liu, H., Liu, X., Li, W., Guo, X., Wang, Y., Wang, G., & Zhao, D. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700283 · Cited by 356
Detection of Micro-Scale Li Dendrite via H2 Gas Capture for Early Safety Warning
Jin, Y., Zheng, Z., Wei, D., Jiang, X., Lu, H., Sun, L., Tao, F., Guo, D., Liu, Y., Gao, J., et al. (2020) · Joule · doi:10.1016/j.joule.2020.05.016 · Cited by 355
Homogeneous CoO on Graphene for Binder‐Free and Ultralong‐Life Lithium Ion Batteries
Huang, X., Wang, R., Xu, D., Wang, Z., Wang, H., Xu, J., Wu, Z., Liu, Q., Zhang, Y., & Zhang, X. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203777 · Cited by 355
Encapsulated Monoclinic Sulfur for Stable Cycling of Li–S Rechargeable Batteries
Moon, S., Jung, Y. H., Jung, W. K., Jung, D. S., Choi, J. W., & Kim, D. K. (2013) · Advanced Materials · doi:10.1002/adma.201303166 · Cited by 354
Liu, K., Liu, W., Qiu, Y., Kong, B., Sun, Y., Chen, Z., Zhuo, D., Lin, D., & Cui, Y. (2017) · Science Advances · doi:10.1126/sciadv.1601978 · Cited by 354
Solid Electrolyte Interphases on Sodium Metal Anodes
Bao, C., Wang, B., Liu, P., Wu, H., Zhou, Y., Wang, D., Liu, H., & Dou, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004891 · Cited by 354
Amorphous CoSnO3@C nanoboxes with superior lithium storage capability
Wang, Z., Wang, Z., Liu, W., Xiao, W., & Lou, X. W. (. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23330d · Cited by 353
Xiao, J., Liu, P., Wang, C. X., & Yang, G. W. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.02.004 · Cited by 352
Ma, J., Hu, P., Cui, G., & Chen, L. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00948 · Cited by 352
Li–CO2 and Na–CO2 Batteries: Toward Greener and Sustainable Electrical Energy Storage
Mu, X., Pan, H., He, P., & Zhou, H. (2020) · Advanced Materials · doi:10.1002/adma.201903790 · Cited by 352
Wang, J., Li, Y., & Sun, X. (2013) · Nano Energy · doi:10.1016/j.nanoen.2012.11.014 · Cited by 350
Polymers in Lithium‐Ion and Lithium Metal Batteries
Li, J., Cai, Y., Wu, H., Yu, Z., Yan, X., Zhang, Q., Gao, T. Z., Liu, K., Jia, X., & Bao, Z. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003239 · Cited by 348
Atomic Layer‐by‐Layer Co3O4/Graphene Composite for High Performance Lithium‐Ion Batteries
Dou, Y., Xu, J., Ruan, B., Liu, Q., Pan, Y., Sun, Z., & Dou, S. X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501835 · Cited by 348
Understanding Li+–Solvent Interaction in Nonaqueous Carbonate Electrolytes with 17O NMR
Bogle, X., Vazquez, R., Greenbaum, S., Cresce, A. V. W., & Xu, K. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400661k · Cited by 348
Han, B., Zhang, Z., Zou, Y., Xu, K., Xu, G., Wang, H., Meng, H., Deng, Y., Li, J., & Gu, M. (2021) · Advanced Materials · doi:10.1002/adma.202100404 · Cited by 346
Efficiently photo-charging lithium-ion battery by perovskite solar cell
Xu, J., Chen, Y., & Dai, L. (2015) · Nature Communications · doi:10.1038/ncomms9103 · Cited by 346
Functional and stability orientation synthesis of materials and structures in aprotic Li–O2batteries
Zhang, P., Zhao, Y., & Zhang, X. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00009c · Cited by 345
Piao, Z., Xiao, P., Luo, R., Ma, J., Gao, R., Li, C., Tan, J., Yu, K., Zhou, G., & Cheng, H. (2022) · Advanced Materials · doi:10.1002/adma.202108400 · Cited by 345
Nikodimos, Y., Huang, C.-J., Taklu, B. W., Su, W.-N., & Hwang, B. J. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03032a · Cited by 345
Manipulating surface reactions in lithium–sulphur batteries using hybrid anode structures
Huang, C., Xiao, J., Shao, Y., Zheng, J., Bennett, W. D., Lu, D., Saraf, L. V., Engelhard, M., Ji, L., Zhang, J., et al. (2014) · Nature Communications · doi:10.1038/ncomms4015 · Cited by 343
SnO2 hollow structures and TiO2 nanosheets for lithium-ion batteries
Chen, J. S., Archer, L. A., & Wen (David) Lou, X. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04163g · Cited by 343
Recent advances in air electrodes for Zn–air batteries: electrocatalysis and structural design
Cai, X., Lai, L., Lin, J., & Shen, Z. (2017) · Materials Horizons · doi:10.1039/c7mh00358g · Cited by 343
Armstrong, E., & O'Dwyer, C. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc01083g · Cited by 342
Li3V2(PO4)3 cathode materials for lithium-ion batteries: A review
Rui, X., Yan, Q., Skyllas-Kazacos, M., & Lim, T. M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.126 · Cited by 342
α-Fe2O3 Nanorods as Anode Material for Lithium Ion Batteries
Lin, Y.-M., Abel, P. R., Heller, A., & Mullins, C. B. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz201363j · Cited by 342
Wang, Y., Zhang, Q., Xue, Z., Yang, L., Wang, J., Meng, F., Li, Q., Pan, H., Zhang, J., Jiang, Z., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001413 · Cited by 342
Metadata
- Authors
- Goodenough, J. B., & Kim, Y.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-08-28
- Volume
- 22
- Issue
- 3
- Pages
- 587-603
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W3023435578
- Cited by
- 10,943
- References
- 59
- FWCI
- 153.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.