The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Challenges for Rechargeable Li Batteries
Abstract
The challenges for further development of Li rechargeable batteries for electric vehicles are reviewed. Most important is safety, which requires development of a nonflammable electrolyte with either a larger window between its lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) or a constituent (or additive) that can develop rapidly a solid/electrolyte-interface (SEI) layer to prevent plating of Li on a carbon anode during a fast charge of the battery. A high Li + -ion conductivity (σ Li > 10 −4 S/cm) in the electrolyte and across the electrode/electrolyte interface is needed for a power battery. Important also is an increase in the density of the stored energy, which is the product of the voltage and capacity of reversible Li insertion/extraction into/from the electrodes. It will be difficult to design a better anode than carbon, but carbon requires formation of an SEI layer, which involves an irreversible capacity loss. The design of a cathode composed of environmentally benign, low-cost materials that has its electrochemical potential μ C well-matched to the HOMO of the electrolyte and allows access to two Li atoms per transition-metal cation would increase the energy density, but it is a daunting challenge. Two redox couples can be accessed where the cation redox couples are “pinned” at the top of the O 2p bands, but to take advantage of this possibility, it must be realized in a framework structure that can accept more than one Li atom per transition-metal cation. Moreover, such a situation represents an intrinsic voltage limit of the cathode, and matching this limit to the HOMO of the electrolyte requires the ability to tune the intrinsic voltage limit. Finally, the chemical compatibility in the battery must allow a long service life.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Self-citationNonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
High-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
Nanomaterials for Rechargeable Lithium Batteries
Bruce, P. G., Scrosati, B., & Tarascon, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702505 · Cited by 5,886
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Self-citationNanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
Self-citationScrosati, B., Magistris, A., Mari, C. M., & Mariotto, G. (1993) · Springer eBooks · doi:10.1007/978-94-011-1916-0 · Cited by 2,218
Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
Cited by
Items 501–578 of 578
Surface-Driven Sodium Ion Energy Storage in Nanocellular Carbon Foams
Shao, Y., Xiao, J., Wang, W., Engelhard, M., Chen, X., Nie, Z., Gu, M., Saraf, L. V., Exarhos, G., Zhang, J.-G., et al. (2013) · Nano Letters · doi:10.1021/nl401995a · Cited by 280
Huang, Q., Chen, J., Liu, M., Huang, H., Zhang, X., & Wei, Y. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124019 · Cited by 280
Design Principles of Artificial Solid Electrolyte Interphases for Lithium-Metal Anodes
Yu, Z., Cui, Y., & Bao, Z. (2020) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2020.100119 · Cited by 280
Progress in solid electrolytes toward realizing solid-state lithium batteries
Takada, K. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.05.003 · Cited by 279
Organic small molecules and polymers as an electrode material for rechargeable lithium ion batteries
Bhosale, M. E., Chae, S., Kim, J. M., & Choi, J.-Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta04906h · Cited by 279
Yu, L., Zhang, L., Wu, H. B., Zhang, G., & Lou, X. W. (. (2013) · Energy Environ. Sci. · doi:10.1039/c3ee41181h · Cited by 277
Zhao, C.-Z., Zhao, B.-C., Yan, C., Zhang, X.-Q., Huang, J.-Q., Mo, Y., Xu, X., Li, H., & Zhang, Q. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.07.026 · Cited by 276
Effects of inhomogeneities - nanoscale to mesoscale - on the durability of Li-Ion batteries
Harris, S. J., & Lu, P. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp311431z · Cited by 271
Recent Advances in Materials and Design of Electrochemically Rechargeable Zinc–Air Batteries
Chen, X., Zhou, Z., Karahan, H. E., Shao, Q., Wei, L., & Chen, Y. (2018) · Small · doi:10.1002/smll.201801929 · Cited by 273
Chuhadiya, S., Himanshu, Suthar, D., Patel, S. L., & Dhaka, M. S. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2021.214115 · Cited by 273
Liang, Y., Liu, H., Wang, G., Wang, C., Ni, Y., Nan, C., & Fan, L. (2022) · InfoMat · doi:10.1002/inf2.12292 · Cited by 273
Hao, X., Zhao, Q., Su, S., Zhang, S., Ma, J., Shen, L., Yu, Q., Zhao, L., Liu, Y., Kang, F., et al. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901604 · Cited by 272
Cui, C., Yang, C., Eidson, N., Chen, J., Han, F., Chen, L., Luo, C., Wang, P., Fan, X., & Wang, C. (2020) · Advanced Materials · doi:10.1002/adma.201906427 · Cited by 272
From aqueous Zn-ion battery to Zn-MnO2 flow battery: A brief story
Xue, T., & Fan, H. J. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.05.056 · Cited by 272
Silicon Nanowire Fabric as a Lithium Ion Battery Electrode Material
Chockla, A. M., Harris, J. T., Akhavan, V. A., Bogart, T. D., Holmberg, V. C., Steinhagen, C., Mullins, C. B., Stevenson, K. J., & Korgel, B. A. (2011) · Journal of the American Chemical Society · doi:10.1021/ja208232h · Cited by 271
Chen, Y., Song, B., Tang, X., Lu, L., & Xue, J. (2014) · Small · doi:10.1002/smll.201302879 · Cited by 271
Lithium alloys and metal oxides as high-capacity anode materials for lithium-ion batteries
Liang, C., Gao, M., Pan, H., Liu, Y., & Yan, M. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.04.001 · Cited by 270
The 2021 battery technology roadmap
Ma, J., Li, Y., Grundish, N. S., Goodenough, J. B., Chen, Y., Guo, L., Peng, Z., Qi, X., Yang, F., Qie, L., et al. (2021) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/abd353 · Cited by 269
Self-citationLee, J., Seo, D.-H., Balasubramanian, M., Twu, N., Li, X., & Ceder, G. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02329g · Cited by 269
High-Efficiency Lithium-Metal Anode Enabled by Liquefied Gas Electrolytes
Yang, Y., Davies, D. M., Yin, Y., Borodin, O., Lee, J. Z., Fang, C., Olguin, M., Zhang, Y., Sablina, E. S., Wang, X., et al. (2019) · Joule · doi:10.1016/j.joule.2019.06.008 · Cited by 268
Insights into the deposition chemistry of Li ions in nonaqueous electrolyte for stable Li anodes
Wang, Z., Sun, Z., Li, J., Shi, Y., Sun, C., An, B., Cheng, H.-M., & Li, F. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01017k · Cited by 268
Strategies to anode protection in lithium metal battery: A review
Li, J., Kong, Z., Liu, X., Zheng, B., Fan, Q. H., Garratt, E., Schuelke, T., Wang, K., Xu, H., & Jin, H. (2021) · InfoMat · doi:10.1002/inf2.12189 · Cited by 267
Yang, W., & Devereaux, T. P. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.018 · Cited by 266
Alkali Metal Anodes for Rechargeable Batteries
Wang, H., Yu, D., Kuang, C., Cheng, L., Li, W., Feng, X., Zhang, Z., Zhang, X., & Zhang, Y. (2019) · Chem · doi:10.1016/j.chempr.2018.11.005 · Cited by 266
Advances in High Sulfur Loading Cathodes for Practical Lithium‐Sulfur Batteries
Wang, M., Bai, Z., Yang, T., Nie, C., Xu, X., Wang, Y., Yang, J., Dou, S., & Wang, N. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201585 · Cited by 266
Recent research progresses in ether‐ and ester‐based electrolytes for sodium‐ion batteries
Lin, Z., Xia, Q., Wang, W., Li, W., & Chou, S. (2019) · InfoMat · doi:10.1002/inf2.12023 · Cited by 265
Bhattacharjya, D., Park, H.-Y., Kim, M.-S., Choi, H.-S., Inamdar, S. N., & Yu, J.-S. (2014) · Langmuir · doi:10.1021/la403366e · Cited by 265
Kim, H., Kim, D. J., Seo, D.-H., Yeom, M. S., Kang, K., Kim, D. K., & Jung, Y. (2012) · Chemistry of Materials · doi:10.1021/cm300065y · Cited by 264
Cathode Materials for Potassium-Ion Batteries: Current Status and Perspective
Zhang, Q., Wang, Z., Zhang, S., Zhou, T., Mao, J., & Guo, Z. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0023-y · Cited by 264
Rechargeable Alkali-Ion Battery Materials: Theory and Computation
Van der Ven, A., Deng, Z., Banerjee, S., & Ong, S. P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00601 · Cited by 264
Materials for Rechargeable Lithium-Ion Batteries
Hayner, C. M., Zhao, X., & Kung, H. H. (2012) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-062011-081024 · Cited by 263
Low‐Temperature Sodium‐Ion Batteries: Challenges and Progress
Bai, Z., Yao, Q., Wang, M., Meng, W., Dou, S., Liu, H. K., & Wang, N. (2024) · Advanced Energy Materials · doi:10.1002/aenm.202303788 · Cited by 262
Advanced Porous Carbon Materials for High‐Efficient Lithium Metal Anodes
Ye, H., Xin, S., Yin, Y., & Guo, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700530 · Cited by 261
Tu, Z., Choudhury, S., Zachman, M. J., Wei, S., Zhang, K., Kourkoutis, L. F., & Archer, L. A. (2017) · Joule · doi:10.1016/j.joule.2017.06.002 · Cited by 261
Chen, Y., Qu, B., Hu, L., Xu, Z., Li, Q., & Wang, T. (2013) · Nanoscale · doi:10.1039/c3nr02972g · Cited by 260
Zhang, T., & Ran, F. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010041 · Cited by 260
Micro/Nanostructured Materials for Sodium Ion Batteries and Capacitors
Li, F., & Zhou, Z. (2018) · Small · doi:10.1002/smll.201702961 · Cited by 259
Recent Advances in Energy Chemical Engineering of Next-Generation Lithium Batteries
Zhang, X.-Q., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2018) · Engineering · doi:10.1016/j.eng.2018.10.008 · Cited by 259
Xie, H., Yang, C., Fu, K. (., Yao, Y., Jiang, F., Hitz, E., Liu, B., Wang, S., & Hu, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703474 · Cited by 258
Baskoro, F., Wong, H. Q., & Yen, H.-J. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b00295 · Cited by 258
Ding, Y., Li, Y., & Yu, G. (2016) · Chem · doi:10.1016/j.chempr.2016.09.004 · Cited by 257
Zhang, J., Zheng, C., Li, L., Xia, Y., Huang, H., Gan, Y., Liang, C., He, X., Tao, X., & Zhang, W. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903311 · Cited by 257
Reddy, R. C. K., Lin, J., Chen, Y., Zeng, C., Lin, X., Cai, Y., & Su, C.-Y. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213434 · Cited by 257
Recent progress on electrolyte additives for stable lithium metal anode
Li, S., Luo, Z., Li, L., Hu, J., Zou, G., Hou, H., & Ji, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.07.008 · Cited by 256
Huo, S., Sheng, L., Xue, W., Wang, L., Xu, H., Zhang, H., & He, X. (2023) · InfoMat · doi:10.1002/inf2.12394 · Cited by 256
Facile synthesis of MoS2@CMK-3 nanocomposite as an improved anode material for lithium-ion batteries
Zhou, X., Wan, L.-J., & Guo, Y.-G. (2012) · Nanoscale · doi:10.1039/c2nr31822a · Cited by 256
Du, F., Tang, H., Pan, L., Zhang, T., Lu, H., Xiong, J., Yang, J., & Zhang, C. (. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.03.153 · Cited by 255
Du, Y., Zhu, X., Zhou, X., Hu, L., Dai, Z., & Bao, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00621j · Cited by 255
The significance of mitigating crosstalk in lithium-ion batteries: a review
Song, Y., Wang, L., Sheng, L., Ren, D., Liang, H., Li, Y., Wang, A., Zhang, H., Xu, H., & He, X. (2023) · Energy & Environmental Science · doi:10.1039/d3ee00441d · Cited by 255
Fluorine Chemistry in Rechargeable Batteries: Challenges, Progress, and Perspectives
Wang, Y., Yang, X., Meng, Y., Wen, Z., Han, R., Hu, X., Sun, B., Kang, F., Li, B., Zhou, D., et al. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00826 · Cited by 255
A fluoroxalate cathode material for potassium-ion batteries with ultra-long cyclability
Ji, B., Yao, W., Zheng, Y., Kidkhunthod, P., Zhou, X., Tunmee, S., Sattayaporn, S., Cheng, H.-M., He, H., & Tang, Y. (2020) · Nature Communications · doi:10.1038/s41467-020-15044-y · Cited by 254
A high-rate aqueous rechargeable zinc ion battery based on the VS4@rGO nanocomposite
Qin, H., Yang, Z., Chen, L., Chen, X., & Wang, L. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta08133f · Cited by 253
A Dynamic, Electrolyte-Blocking, and Single-Ion-Conductive Network for Stable Lithium-Metal Anodes
Yu, Z., Mackanic, D. G., Michaels, W., Lee, M., Pei, A., Feng, D., Zhang, Q., Tsao, Y., Amanchukwu, C. V., Yan, X., et al. (2019) · Joule · doi:10.1016/j.joule.2019.07.025 · Cited by 253
Cathode materials for next generation lithium ion batteries
Xu, J., Dou, S., Liu, H., & Dai, L. (2013) · Nano Energy · doi:10.1016/j.nanoen.2013.05.013 · Cited by 253
Xiang, Y., Lu, L., Kottapalli, A. G. P., & Pei, Y. (2022) · Carbon Energy · doi:10.1002/cey2.185 · Cited by 253
The dimensionality of Sn anodes in Li-ion batteries
Wang, B., Luo, B., Li, X., & Zhi, L. (2012) · Materials Today · doi:10.1016/s1369-7021(13)70012-9 · Cited by 252
A Generalized SOC-OCV Model for Lithium-Ion Batteries and the SOC Estimation for LNMCO Battery
Zhang, C., Jiang, J., Zhang, L., Liu, S., Wang, L., & Loh, P. (2016) · Energies · doi:10.3390/en9110900 · Cited by 213
Zhang, Y., Gao, Z., Song, N., & Li, X. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.11.099 · Cited by 192
Holoubek, J., Yin, Y., Li, M., Yu, M., Meng, Y. S., Liu, P., & Chen, Z. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201912167 · Cited by 182
Solid–Electrolyte Interphase During Battery Cycling: Theory of Growth Regimes
von Kolzenberg, L., Latz, A., & Horstmann, B. (2020) · ChemSusChem · doi:10.1002/cssc.202000867 · Cited by 162
Ji, B., Zhang, F., Sheng, M., Tong, X., & Tang, Y. (2017) · Advanced Materials · doi:10.1002/adma.201604219 · Cited by 160
A Na3V2(PO4)3 cathode material for use in hybrid lithium ion batteries
Song, W., Ji, X., Pan, C., Zhu, Y., Chen, Q., & Banks, C. E. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp52308j · Cited by 126
Assessing a First-Principles Model of an Electrochemical Interface by Comparison with Experiment
Steinmann, S. N., & Sautet, P. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b01938 · Cited by 120
Guo, R., Che, Y., Lan, G., Lan, J., Li, J., Xing, L., Xu, K., Fan, W., Yu, L., & Li, W. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b12020 · Cited by 113
Tron, A., Jeong, S., Park, Y. D., & Mun, J. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b02042 · Cited by 105
Understanding inks for porous-electrode formation
Hatzell, K. B., Dixit, M. B., Berlinger, S. A., & Weber, A. Z. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta07255d · Cited by 97
Aging behavior and mechanisms of lithium-ion battery under multi-aging path
Liu, J., Zhou, L., Zhang, Y., Wang, J., & Wang, Z. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.138678 · Cited by 87
A Comprehensive Membrane Process for Preparing Lithium Carbonate from High Mg/Li Brine
Xu, W., Liu, D., He, L., & Zhao, Z. (2020) · Membranes · doi:10.3390/membranes10120371 · Cited by 76
Jo, S., Jung, S., & Roh, T. (2021) · Energies · doi:10.3390/en14217206 · Cited by 76
Zhang, J., Tahmasebi, A., Omoriyekomwan, J. E., & Yu, J. (2021) · Fuel Processing Technology · doi:10.1016/j.fuproc.2020.106714 · Cited by 69
Eckhoff, M., Lausch, K. N., Blöchl, P. E., & Behler, J. (2020) · The Journal of Chemical Physics · doi:10.1063/5.0021452 · Cited by 45
Effect of microstructure on low temperature electrochemical properties of LiFePO4/C cathode material
Zhao, N., Zhi, X., Wang, L., Liu, Y., & Liang, G. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.05.097 · Cited by 39
A Safer, Wide-Temperature Liquefied Gas Electrolyte Based on Difluoromethane
Davies, D. M., Yang, Y., Sablina, E. S., Yin, Y., Mayer, M., Zhang, Y., Olguin, M., Lee, J. Z., Lu, B., Damien, D., et al. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229668 · Cited by 30
Geometry-influenced cooling performance of lithium-ion battery
Dubey, D., Mishra, A., Ghosh, S., Reddy, M. V., & Pandey, R. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120723 · Cited by 25
Chen, H., Fu, W., Geng, Z., Zeng, J., & Yang, B. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta11295j · Cited by 25
Han, X., Liu, Z., Hu, X., Huang, Q., Zhang, D., Guo, H., & Yi, Q. (2024) · Advanced Energy and Sustainability Research · doi:10.1002/aesr.202300166 · Cited by 22
Wei, C., Ruan, J., Song, Z., Chen, X., Wang, D., Jiang, J., Wang, X., Zhou, A., Zou, W., & Li, J. (2023) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2023.170643 · Cited by 14
Li, M., Zuo, Z., Deng, J., Yao, Q., Wang, Z., Zhou, H., & Rao, G. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2302-8 · Cited by 5
Metadata
- Authors
- Goodenough, J. B., & Kim, Y.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-08-28
- Volume
- 22
- Issue
- 3
- Pages
- 587-603
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W3023435578
- Cited by
- 10,943
- References
- 59
- FWCI
- 153.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.