The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Challenges for Rechargeable Li Batteries
Abstract
The challenges for further development of Li rechargeable batteries for electric vehicles are reviewed. Most important is safety, which requires development of a nonflammable electrolyte with either a larger window between its lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) or a constituent (or additive) that can develop rapidly a solid/electrolyte-interface (SEI) layer to prevent plating of Li on a carbon anode during a fast charge of the battery. A high Li + -ion conductivity (σ Li > 10 −4 S/cm) in the electrolyte and across the electrode/electrolyte interface is needed for a power battery. Important also is an increase in the density of the stored energy, which is the product of the voltage and capacity of reversible Li insertion/extraction into/from the electrodes. It will be difficult to design a better anode than carbon, but carbon requires formation of an SEI layer, which involves an irreversible capacity loss. The design of a cathode composed of environmentally benign, low-cost materials that has its electrochemical potential μ C well-matched to the HOMO of the electrolyte and allows access to two Li atoms per transition-metal cation would increase the energy density, but it is a daunting challenge. Two redox couples can be accessed where the cation redox couples are “pinned” at the top of the O 2p bands, but to take advantage of this possibility, it must be realized in a framework structure that can accept more than one Li atom per transition-metal cation. Moreover, such a situation represents an intrinsic voltage limit of the cathode, and matching this limit to the HOMO of the electrolyte requires the ability to tune the intrinsic voltage limit. Finally, the chemical compatibility in the battery must allow a long service life.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Self-citationNonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
High-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
Nanomaterials for Rechargeable Lithium Batteries
Bruce, P. G., Scrosati, B., & Tarascon, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702505 · Cited by 5,886
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Self-citationNanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
Self-citationScrosati, B., Magistris, A., Mari, C. M., & Mariotto, G. (1993) · Springer eBooks · doi:10.1007/978-94-011-1916-0 · Cited by 2,218
Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
Cited by
Items 201–300 of 578
Stability and deactivation of OER electrocatalysts: A review
Zeng, F., Mebrahtu, C., Liao, L., Beine, A. K., & Palkovits, R. (2022) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2022.01.025 · Cited by 602
Charge-transfer-energy-dependent oxygen evolution reaction mechanisms for perovskite oxides
Hong, W. T., Stoerzinger, K. A., Lee, Y.-L., Giordano, L., Grimaud, A., Johnson, A. M., Hwang, J., Crumlin, E. J., Yang, W., & Shao-Horn, Y. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02052j · Cited by 599
Ether-based electrolytes for sodium ion batteries
Li, Y., Wu, F., Li, Y., Liu, M., Feng, X., Bai, Y., & Wu, C. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00948f · Cited by 597
Solid electrolyte interphases in lithium metal batteries
Jagger, B., & Pasta, M. (2023) · Joule · doi:10.1016/j.joule.2023.08.007 · Cited by 592
A critical review of cathodes for rechargeable Mg batteries
Mao, M., Gao, T., Hou, S., & Wang, C. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00319j · Cited by 591
Interpenetrated Gel Polymer Binder for High‐Performance Silicon Anodes in Lithium‐ion Batteries
Song, J., Zhou, M., Yi, R., Xu, T., Gordin, M. L., Tang, D., Yu, Z., Regula, M., & Wang, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401269 · Cited by 589
Park, K. H., Bai, Q., Kim, D. H., Oh, D. Y., Zhu, Y., Mo, Y., & Jung, Y. S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800035 · Cited by 589
Cao, X., Shi, Y., Shi, W., Rui, X., Yan, Q., Kong, J., & Zhang, H. (2013) · Small · doi:10.1002/smll.201202697 · Cited by 580
Graphitized Carbon Fibers as Multifunctional 3D Current Collectors for High Areal Capacity Li Anodes
Zuo, T., Wu, X., Yang, C., Yin, Y., Ye, H., Li, N., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700389 · Cited by 579
Alfaruqi, M. H., Mathew, V., Song, J., Kim, S., Islam, S., Pham, D. T., Jo, J., Kim, S., Baboo, J. P., Xiu, Z., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b05092 · Cited by 577
Emerging Applications of Atomic Layer Deposition for Lithium‐Ion Battery Studies
Meng, X., Yang, X., & Sun, X. (2012) · Advanced Materials · doi:10.1002/adma.201200397 · Cited by 573
Progress in electrolytes for rechargeable Li-based batteries and beyond
Li, Q., Chen, J., Fan, L., Kong, X., & Lu, Y. (2016) · Green Energy & Environment · doi:10.1016/j.gee.2016.04.006 · Cited by 569
A highly stable and flexible zeolite electrolyte solid-state Li–air battery
Chi, X., Li, M., Di, J., Bai, P., Song, L., Wang, X., Li, F., Liang, S., Xu, J., & Yu, J. (2021) · Nature · doi:10.1038/s41586-021-03410-9 · Cited by 562
A manganese–hydrogen battery with potential for grid-scale energy storage
Chen, W., Li, G., Pei, A., Li, Y., Liao, L., Wang, H., Wan, J., Liang, Z., Chen, G., Zhang, H., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0147-7 · Cited by 561
Garnet Electrolyte with an Ultralow Interfacial Resistance for Li-Metal Batteries
Li, Y., Chen, X., Dolocan, A., Cui, Z., Xin, S., Xue, L., Xu, H., Park, K., & Goodenough, J. B. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b03106 · Cited by 556
Self-citationXu, J., Dou, Y., Wei, Z., Ma, J., Deng, Y., Li, Y., Liu, H., & Dou, S. (2017) · Advanced Science · doi:10.1002/advs.201700146 · Cited by 550
In situ quantification of interphasial chemistry in Li-ion battery
Liu, T., Lin, L., Bi, X., Tian, L., Yang, K., Liu, J., Li, M., Chen, Z., Lu, J., Amine, K., et al. (2019) · Nature Nanotechnology · doi:10.1038/s41565-018-0284-y · Cited by 550
Kim, H. J., Choi, S., Lee, S. J., Seo, M. W., Lee, J. G., Deniz, E., Lee, Y. J., Kim, E. K., & Choi, J. W. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b03776 · Cited by 549
Interface Issues and Challenges in All‐Solid‐State Batteries: Lithium, Sodium, and Beyond
Lou, S., Zhang, F., Fu, C., Chen, M., Ma, Y., Yin, G., & Wang, J. (2021) · Advanced Materials · doi:10.1002/adma.202000721 · Cited by 548
Moving beyond 99.9% Coulombic efficiency for lithium anodes in liquid electrolytes
Hobold, G. M., Lopez, J., Guo, R., Minafra, N., Banerjee, A., Shirley Meng, Y., Shao-Horn, Y., & Gallant, B. M. (2021) · Nature Energy · doi:10.1038/s41560-021-00910-w · Cited by 547
Surface and Interface Engineering of Electrode Materials for Lithium‐Ion Batteries
Wang, K., Li, X., & Chen, J. (2015) · Advanced Materials · doi:10.1002/adma.201402962 · Cited by 546
Two‐Dimensional Nanoarchitectures for Lithium Storage
Liu, J., & Liu, X. (2012) · Advanced Materials · doi:10.1002/adma.201104993 · Cited by 543
Zhang, W., Weber, D. A., Weigand, H., Arlt, T., Manke, I., Schröder, D., Koerver, R., Leichtweiss, T., Hartmann, P., Zeier, W. G., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01137 · Cited by 538
Sharafi, A., Meyer, H. M., Nanda, J., Wolfenstine, J., & Sakamoto, J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.10.053 · Cited by 536
Fast ion transport at solid–solid interfaces in hybrid battery anodes
Tu, Z., Choudhury, S., Zachman, M. J., Wei, S., Zhang, K., Kourkoutis, L. F., & Archer, L. A. (2018) · Nature Energy · doi:10.1038/s41560-018-0096-1 · Cited by 536
Developing High‐Performance Lithium Metal Anode in Liquid Electrolytes: Challenges and Progress
Li, S., Jiang, M., Xie, Y., Xu, H., Jia, J., & Li, J. (2018) · Advanced Materials · doi:10.1002/adma.201706375 · Cited by 535
Confronting the Challenges in Lithium Anodes for Lithium Metal Batteries
Wang, Q., Liu, B., Shen, Y., Wu, J., Zhao, Z., Zhong, C., & Hu, W. (2021) · Advanced Science · doi:10.1002/advs.202101111 · Cited by 531
Li ion battery materials with core–shell nanostructures
Su, L., Jing, Y., & Zhou, Z. (2011) · Nanoscale · doi:10.1039/c1nr10550g · Cited by 526
Fang, G., Wu, Z., Zhou, J., Zhu, C., Cao, X., Lin, T., Chen, Y., Wang, C., Pan, A., & Liang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703155 · Cited by 525
Recent Progress in Organic Electrodes for Li and Na Rechargeable Batteries
Lee, S., Kwon, G., Ku, K., Yoon, K., Jung, S., Lim, H., & Kang, K. (2018) · Advanced Materials · doi:10.1002/adma.201704682 · Cited by 525
Li, H., Xing, S., Liu, Y., Li, F., Guo, H., & Kuang, G. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01594 · Cited by 523
A review of current collectors for lithium-ion batteries
Zhu, P., Gastol, D., Marshall, J., Sommerville, R., Goodship, V., & Kendrick, E. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.229321 · Cited by 523
Wu, K., Huang, J., Yi, J., Liu, X., Liu, Y., Wang, Y., Zhang, J., & Xia, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903977 · Cited by 522
A Long‐Cycle‐Life Self‐Doped Polyaniline Cathode for Rechargeable Aqueous Zinc Batteries
Shi, H., Ye, Y., Liu, K., Song, Y., & Sun, X. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201808886 · Cited by 520
Zhou, G., Wang, D.-W., Li, F., Hou, P.-X., Yin, L., Liu, C., Lu, G. Q. (., Gentle, I. R., & Cheng, H.-M. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22294a · Cited by 518
Identifying the components of the solid–electrolyte interphase in Li-ion batteries
Wang, L., Menakath, A., Han, F., Wang, Y., Zavalij, P. Y., Gaskell, K. J., Borodin, O., Iuga, D., Brown, S. P., Wang, C., et al. (2019) · Nature Chemistry · doi:10.1038/s41557-019-0304-z · Cited by 514
Highly Reversible Open Framework Nanoscale Electrodes for Divalent Ion Batteries
Wang, R. Y., Wessells, C. D., Huggins, R. A., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl403669a · Cited by 514
Nanostructured Anode Materials for Lithium Ion Batteries: Progress, Challenge and Perspective
Mahmood, N., Tang, T., & Hou, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600374 · Cited by 514
Comparative Issues of Cathode Materials for Li-Ion Batteries
Julien, C., Mauger, A., Zaghib, K., & Groult, H. (2014) · Inorganics · doi:10.3390/inorganics2010132 · Cited by 513
Exploring metal organic frameworks for energy storage in batteries and supercapacitors
Xu, G., Nie, P., Dou, H., Ding, B., Li, L., & Zhang, X. (2017) · Materials Today · doi:10.1016/j.mattod.2016.10.003 · Cited by 512
He, H., Tong, H., Song, X., Song, X., & Liu, J. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta00748j · Cited by 512
Advanced High‐Voltage Aqueous Lithium‐Ion Battery Enabled by “Water‐in‐Bisalt” Electrolyte
Suo, L., Borodin, O., Sun, W., Fan, X., Yang, C., Wang, F., Gao, T., Ma, Z., Schroeder, M., von Cresce, A., et al. (2016) · Angewandte Chemie · doi:10.1002/ange.201602397 · Cited by 508
High-Voltage Superionic Halide Solid Electrolytes for All-Solid-State Li-Ion Batteries
Park, K.-H., Kaup, K., Assoud, A., Zhang, Q., Wu, X., & Nazar, L. F. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.9b02599 · Cited by 506
Anodes for Rechargeable Lithium‐Sulfur Batteries
Cao, R., Xu, W., Lv, D., Xiao, J., & Zhang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402273 · Cited by 502
7Li MRI of Li batteries reveals location of microstructural lithium
Chandrashekar, S., Trease, N. M., Chang, H. J., Du, L.-S., Grey, C. P., & Jerschow, A. (2012) · Nature Materials · doi:10.1038/nmat3246 · Cited by 499
In situ TEM electrochemistry of anode materials in lithium ion batteries
Liu, X. H., & Huang, J. Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01918j · Cited by 496
Suntivich, J., Hong, W. T., Lee, Y.-L., Rondinelli, J. M., Yang, W., Goodenough, J. B., Dabrowski, B., Freeland, J. W., & Shao-Horn, Y. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp410644j · Cited by 494
Self-citationNitrogen-Doped Multiwall Carbon Nanotubes for Lithium Storage with Extremely High Capacity
Shin, W. H., Jeong, H. M., Kim, B. G., Kang, J. K., & Choi, J. W. (2012) · Nano Letters · doi:10.1021/nl3000908 · Cited by 492
Kushima, A., So, K. P., Su, C., Bai, P., Kuriyama, N., Maebashi, T., Fujiwara, Y., Bazant, M. Z., & Li, J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2016.12.001 · Cited by 492
Double‐Layer Polymer Electrolyte for High‐Voltage All‐Solid‐State Rechargeable Batteries
Zhou, W., Wang, Z., Pu, Y., Li, Y., Xin, S., Li, X., Chen, J., & Goodenough, J. B. (2019) · Advanced Materials · doi:10.1002/adma.201805574 · Cited by 491
Self-citationChemically Bonded Phosphorus/Graphene Hybrid as a High Performance Anode for Sodium-Ion Batteries
Song, J., Yu, Z., Gordin, M. L., Hu, S., Yi, R., Tang, D., Walter, T., Regula, M., Choi, D., Li, X., et al. (2014) · Nano Letters · doi:10.1021/nl502759z · Cited by 490
A review of technologies and applications on versatile energy storage systems
Zhang, Z., Ding, T., Zhou, Q., Sun, Y., Qu, M., Zeng, Z., Ju, Y., Li, L., Wang, K., & Chi, F. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111263 · Cited by 489
In situ analytical techniques for battery interface analysis
Tripathi, A. M., Su, W.-N., & Hwang, B. J. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00180k · Cited by 488
Heterogeneous nanostructured electrode materials for electrochemical energy storage
Liu, R., Duay, J., & Lee, S. B. (2011) · Chem. Commun. · doi:10.1039/c0cc03158e · Cited by 486
Regulating Anions in the Solvation Sheath of Lithium Ions for Stable Lithium Metal Batteries
Zhang, X.-Q., Chen, X., Hou, L.-P., Li, B.-Q., Cheng, X.-B., Huang, J.-Q., & Zhang, Q. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b02376 · Cited by 485
Yin, L., Wang, J., Lin, F., Yang, J., & Nuli, Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03495f · Cited by 484
Vanadium‐Based Nanomaterials: A Promising Family for Emerging Metal‐Ion Batteries
Xu, X., Xiong, F., Meng, J., Wang, X., Niu, C., An, Q., & Mai, L. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904398 · Cited by 482
Nanomaterials for Energy Conversion and Storage
Wang, D., & Cao, G. (2018) · WORLD SCIENTIFIC (EUROPE) eBooks · doi:10.1142/q0105 · Cited by 480
Scalable and safe synthetic organic electroreduction inspired by Li-ion battery chemistry
Peters, B. K., Rodriguez, K. X., Reisberg, S. H., Beil, S. B., Hickey, D. P., Kawamata, Y., Collins, M., Starr, J., Chen, L., Udyavara, S., et al. (2019) · Science · doi:10.1126/science.aav5606 · Cited by 478
Hausbrand, R., Cherkashinin, G., Ehrenberg, H., Gröting, M., Albe, K., Hess, C., & Jaegermann, W. (2015) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2014.11.014 · Cited by 478
Zhang, J.-N., Li, Q., Wang, Y., Zheng, J., Yu, X., & Li, H. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.016 · Cited by 473
Recent developments in electrode materials for sodium-ion batteries
Wang, L. P., Yu, L., Wang, X., Srinivasan, M., & Xu, Z. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06467d · Cited by 468
LiMnPO4 – A next generation cathode material for lithium-ion batteries
Aravindan, V., Gnanaraj, J., Lee, Y.-S., & Madhavi, S. (2013) · Journal of Materials Chemistry A · doi:10.1039/c2ta01393b · Cited by 466
Li, W., Dolocan, A., Oh, P., Celio, H., Park, S., Cho, J., & Manthiram, A. (2017) · Nature Communications · doi:10.1038/ncomms14589 · Cited by 466
Duan, H., Fan, M., Chen, W., Li, J., Wang, P., Wang, W., Shi, J., Yin, Y., Wan, L., & Guo, Y. (2019) · Advanced Materials · doi:10.1002/adma.201807789 · Cited by 466
Wang, J., Zhang, L., Yu, L., Jiao, Z., Xie, H., Lou, X. W., & Wei Sun, X. (2014) · Nature Communications · doi:10.1038/ncomms5921 · Cited by 465
Density Functional Theory for Battery Materials
He, Q., Yu, B., Li, Z., & Zhao, Y. (2019) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12056 · Cited by 463
Research Progress on Negative Electrodes for Practical Li‐Ion Batteries: Beyond Carbonaceous Anodes
Aravindan, V., Lee, Y., & Madhavi, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402225 · Cited by 462
Lin, D., Lu, Z., Hsu, P.-C., Lee, H. R., Liu, N., Zhao, J., Wang, H., Liu, C., & Cui, Y. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01363a · Cited by 462
Two‐Dimensional Metal Oxide Nanomaterials for Next‐Generation Rechargeable Batteries
Mei, J., Liao, T., Kou, L., & Sun, Z. (2017) · Advanced Materials · doi:10.1002/adma.201700176 · Cited by 459
Key Issues Hindering a Practical Lithium-Metal Anode
Fang, C., Wang, X., & Meng, Y. S. (2019) · Trends in Chemistry · doi:10.1016/j.trechm.2019.02.015 · Cited by 459
Zhao, Y., Ding, Y., Li, Y., Peng, L., Byon, H. R., Goodenough, J. B., & Yu, G. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00289c · Cited by 458
Self-citationSurface Chemistry in Cobalt Phosphide-Stabilized Lithium–Sulfur Batteries
Zhong, Y., Yin, L., He, P., Liu, W., Wu, Z., & Wang, H. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b11434 · Cited by 458
Review on Li Deposition in Working Batteries: From Nucleation to Early Growth
Chen, X., Zhao, B., Yan, C., & Zhang, Q. (2021) · Advanced Materials · doi:10.1002/adma.202004128 · Cited by 456
Wiers, B. M., Foo, M.-L., Balsara, N. P., & Long, J. R. (2011) · Journal of the American Chemical Society · doi:10.1021/ja205827z · Cited by 454
Kuznetsov, D. A., Han, B., Yu, Y., Rao, R. R., Hwang, J., Román-Leshkov, Y., & Shao-Horn, Y. (2018) · Joule · doi:10.1016/j.joule.2017.11.014 · Cited by 452
Zhang, Y., Katayama, Y., Tatara, R., Giordano, L., Yu, Y., Fraggedakis, D., Sun, J. G., Maglia, F., Jung, R., Bazant, M. Z., et al. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02543j · Cited by 452
An Advanced Selenium–Carbon Cathode for Rechargeable Lithium–Selenium Batteries
Yang, C., Xin, S., Yin, Y., Ye, H., Zhang, J., & Guo, Y. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201303147 · Cited by 452
Lithium‐Ion Conducting Electrolyte Salts for Lithium Batteries
Aravindan, V., Gnanaraj, J., Madhavi, S., & Liu, H. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201101486 · Cited by 452
Materials’ Methods: NMR in Battery Research
Pecher, O., Carretero-González, J., Griffith, K. J., & Grey, C. P. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03183 · Cited by 452
Two-Phase Electrochemical Lithiation in Amorphous Silicon
Wang, J. W., He, Y., Fan, F., Liu, X. H., Xia, S., Liu, Y., Harris, C. T., Li, H., Huang, J. Y., Mao, S. X., et al. (2013) · Nano Letters · doi:10.1021/nl304379k · Cited by 451
Ye, H., Xin, S., Yin, Y.-X., Li, J.-Y., Guo, Y.-G., & Wan, L.-J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b01763 · Cited by 451
Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 450
Huang, J., Xie, Y., You, Y., Yuan, J., Xu, Q., Xie, H., & Chen, Y. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202213095 · Cited by 448
The importance of design in lithium ion battery recycling – a critical review
Thompson, D. L., Hartley, J. M., Lambert, S. M., Shiref, M., Harper, G. D. J., Kendrick, E., Anderson, P., Ryder, K. S., Gaines, L., & Abbott, A. P. (2020) · Green Chemistry · doi:10.1039/d0gc02745f · Cited by 443
Zhou, A., Cheng, W., Wang, W., Zhao, Q., Xie, J., Zhang, W., Gao, H., Xue, L., & Li, J. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000943 · Cited by 442
Ion Transport by Nanochannels in Ion-Containing Aromatic Copolymers
Li, N., & Guiver, M. D. (2014) · Macromolecules · doi:10.1021/ma402254h · Cited by 440
Solvent-Free, Single Lithium-Ion Conducting Covalent Organic Frameworks
Jeong, K., Park, S., Jung, G. Y., Kim, S. H., Lee, Y.-H., Kwak, S. K., & Lee, S.-Y. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b00543 · Cited by 440
Hydroxylated Graphene–Sulfur Nanocomposites for High‐Rate Lithium–Sulfur Batteries
Zu, C., & Manthiram, A. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201201080 · Cited by 435
Design and Preparation of Materials for Advanced Electrochemical Storage
Melot, B. C., & Tarascon, J.-M. (2013) · Accounts of Chemical Research · doi:10.1021/ar300088q · Cited by 435
Walther, F., Koerver, R., Fuchs, T., Ohno, S., Sann, J., Rohnke, M., Zeier, W. G., & Janek, J. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b00770 · Cited by 433
Achievements, Challenges, and Prospects of Calcium Batteries
Arroyo-de Dompablo, M. E., Ponrouch, A., Johansson, P., & Palacín, M. R. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00339 · Cited by 429
A review of electrolytes for lithium–sulphur batteries
Scheers, J., Fantini, S., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.023 · Cited by 429
Interface chemistry of an amide electrolyte for highly reversible lithium metal batteries
Wang, Q., Yao, Z., Zhao, C., Verhallen, T., Tabor, D. P., Liu, M., Ooms, F., Kang, F., Aspuru-Guzik, A., Hu, Y.-S., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17976-x · Cited by 427
Na2Ti3O7: an intercalation based anode for sodium-ion battery applications
Rudola, A., Saravanan, K., Mason, C. W., & Balaya, P. (2013) · Journal of Materials Chemistry A · doi:10.1039/c2ta01057g · Cited by 421
Rondinelli, J. M., & Spaldin, N. A. (2011) · Advanced Materials · doi:10.1002/adma.201101152 · Cited by 421
Atomic-Scale Clarification of Structural Transition of MoS2 upon Sodium Intercalation
Wang, X., Shen, X., Wang, Z., Yu, R., & Chen, L. (2014) · ACS Nano · doi:10.1021/nn505501v · Cited by 421
Interface layer formation in solid polymer electrolyte lithium batteries: an XPS study
Xu, C., Sun, B., Gustafsson, T., Edström, K., Brandell, D., & Hahlin, M. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00214h · Cited by 419
Fundamentals and Challenges of Lithium Ion Batteries at Temperatures between −40 and 60 °C
Hou, J., Yang, M., Wang, D., & Zhang, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904152 · Cited by 419
Anion-enrichment interface enables high-voltage anode-free lithium metal batteries
Mao, M., Ji, X., Wang, Q., Lin, Z., Li, M., Liu, T., Wang, C., Hu, Y.-S., Li, H., Huang, X., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-36853-x · Cited by 418
Metadata
- Authors
- Goodenough, J. B., & Kim, Y.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-08-28
- Volume
- 22
- Issue
- 3
- Pages
- 587-603
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W3023435578
- Cited by
- 10,943
- References
- 59
- FWCI
- 153.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.