The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Challenges for Rechargeable Li Batteries
Abstract
The challenges for further development of Li rechargeable batteries for electric vehicles are reviewed. Most important is safety, which requires development of a nonflammable electrolyte with either a larger window between its lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) or a constituent (or additive) that can develop rapidly a solid/electrolyte-interface (SEI) layer to prevent plating of Li on a carbon anode during a fast charge of the battery. A high Li + -ion conductivity (σ Li > 10 −4 S/cm) in the electrolyte and across the electrode/electrolyte interface is needed for a power battery. Important also is an increase in the density of the stored energy, which is the product of the voltage and capacity of reversible Li insertion/extraction into/from the electrodes. It will be difficult to design a better anode than carbon, but carbon requires formation of an SEI layer, which involves an irreversible capacity loss. The design of a cathode composed of environmentally benign, low-cost materials that has its electrochemical potential μ C well-matched to the HOMO of the electrolyte and allows access to two Li atoms per transition-metal cation would increase the energy density, but it is a daunting challenge. Two redox couples can be accessed where the cation redox couples are “pinned” at the top of the O 2p bands, but to take advantage of this possibility, it must be realized in a framework structure that can accept more than one Li atom per transition-metal cation. Moreover, such a situation represents an intrinsic voltage limit of the cathode, and matching this limit to the HOMO of the electrolyte requires the ability to tune the intrinsic voltage limit. Finally, the chemical compatibility in the battery must allow a long service life.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Self-citationNonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
High-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
Nanomaterials for Rechargeable Lithium Batteries
Bruce, P. G., Scrosati, B., & Tarascon, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702505 · Cited by 5,886
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Self-citationNanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
Self-citationScrosati, B., Magistris, A., Mari, C. M., & Mariotto, G. (1993) · Springer eBooks · doi:10.1007/978-94-011-1916-0 · Cited by 2,218
Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
Cited by
Items 101–200 of 578
Koerver, R., Aygün, I., Leichtweiß, T., Dietrich, C., Zhang, W., Binder, J. O., Hartmann, P., Zeier, W. G., & Janek, J. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00931 · Cited by 1,020
A Growing Appreciation for the Role of LiF in the Solid Electrolyte Interphase
Tan, J., Matz, J., Dong, P., Shen, J., & Ye, M. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202100046 · Cited by 1,019
Nanomaterials for renewable energy production and storage
Chen, X., Li, C., Grätzel, M., Kostecki, R., & Mao, S. S. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35230c · Cited by 1,015
Graphite as anode materials: Fundamental mechanism, recent progress and advances
Zhang, H., Yang, Y., Ren, D., Wang, L., & He, X. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.12.027 · Cited by 1,011
Bak, S.-M., Hu, E., Zhou, Y., Yu, X., Senanayake, S. D., Cho, S.-J., Kim, K.-B., Chung, K. Y., Yang, X.-Q., & Nam, K.-W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506712c · Cited by 1,010
Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte
Zhou, W., Wang, S., Li, Y., Xin, S., Manthiram, A., & Goodenough, J. B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05341 · Cited by 1,006
Self-citationHydrate-melt electrolytes for high-energy-density aqueous batteries
Yamada, Y., Usui, K., Sodeyama, K., Ko, S., Tateyama, Y., & Yamada, A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.129 · Cited by 1,005
Copper hexacyanoferrate battery electrodes with long cycle life and high power
Wessells, C. D., Huggins, R. A., & Cui, Y. (2011) · Nature Communications · doi:10.1038/ncomms1563 · Cited by 1,001
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Jian, Z., Han, W., Lu, X., Yang, H., Hu, Y., Zhou, J., Zhou, Z., Li, J., Chen, W., Chen, D., et al. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200558 · Cited by 970
Electrolyte design for Li-ion batteries under extreme operating conditions
Xu, J., Zhang, J., Pollard, T. P., Li, Q., Tan, S., Hou, S., Wan, H., Chen, F., He, H., Hu, E., et al. (2023) · Nature · doi:10.1038/s41586-022-05627-8 · Cited by 970
Chen, H., Ling, M., Hencz, L., Ling, H. Y., Li, G., Lin, Z., Liu, G., & Zhang, S. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00241 · Cited by 958
Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
Chen, D., Chen, C., Baiyee, Z. M., Shao, Z., & Ciucci, F. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00073 · Cited by 936
Progress of enhancing the safety of lithium ion battery from the electrolyte aspect
Wang, Q., Jiang, L., Yu, Y., & Sun, J. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.10.035 · Cited by 915
Advances and challenges for flexible energy storage and conversion devices and systems
Li, L., Wu, Z., Yuan, S., & Zhang, X.-B. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00318g · Cited by 895
Designing polymers for advanced battery chemistries
Lopez, J., Mackanic, D. G., Cui, Y., & Bao, Z. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0103-6 · Cited by 894
An Overview on the Advances of LiCoO2 Cathodes for Lithium‐Ion Batteries
Lyu, Y., Wu, X., Wang, K., Feng, Z., Cheng, T., Liu, Y., Wang, M., Chen, R., Xu, L., Zhou, J., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000982 · Cited by 890
Transition‐Metal (Fe, Co, Ni) Based Metal‐Organic Frameworks for Electrochemical Energy Storage
Zheng, S., Li, X., Yan, B., Hu, Q., Xu, Y., Xiao, X., Xue, H., & Pang, H. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602733 · Cited by 887
Synthesis of micro/nanoscaled metal–organic frameworks and their direct electrochemical applications
Xiao, X., Zou, L., Pang, H., & Xu, Q. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00614d · Cited by 882
Strongly coupled inorganic–nano-carbon hybrid materials for energy storage
Wang, H., & Dai, H. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35307e · Cited by 876
Promising Routes to a High Li+ Transference Number Electrolyte for Lithium Ion Batteries
Diederichsen, K. M., McShane, E. J., & McCloskey, B. D. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00792 · Cited by 874
Study of energy storage systems and environmental challenges of batteries
Dehghani-Sanij, A. R., Tharumalingam, E., Dusseault, M. B., & Fraser, R. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.01.023 · Cited by 872
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Detection of subsurface structures underneath dendrites formed on cycled lithium metal electrodes
Harry, K. J., Hallinan, D. T., Parkinson, D. Y., MacDowell, A. A., & Balsara, N. P. (2014) · Nature Materials · doi:10.1038/nmat3793 · Cited by 868
Graphene aerogels for efficient energy storage and conversion
Mao, J., Iocozzia, J., Huang, J., Meng, K., Lai, Y., & Lin, Z. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03031b · Cited by 868
Evolution of Strategies for Modern Rechargeable Batteries
Goodenough, J. B. (2013) · Accounts of Chemical Research · doi:10.1021/ar2002705 · Cited by 859
Self-citationNanostructured Mn-based oxides for electrochemical energy storage and conversion
Zhang, K., Han, X., Hu, Z., Zhang, X., Tao, Z., & Chen, J. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00218k · Cited by 859
Chae, S., Choi, S., Kim, N., Sung, J., & Cho, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201902085 · Cited by 856
Prussian Blue Analogues for Sodium‐Ion Batteries: Past, Present, and Future
Peng, J., Zhang, W., Liu, Q., Wang, J., Chou, S., Liu, H., & Dou, S. (2022) · Advanced Materials · doi:10.1002/adma.202108384 · Cited by 849
Zhang, X., Chen, X., Cheng, X., Li, B., Shen, X., Yan, C., Huang, J., & Zhang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201801513 · Cited by 838
Lithium Batteries and the Solid Electrolyte Interphase (SEI)—Progress and Outlook
Adenusi, H., Chass, G. A., Passerini, S., Tian, K. V., & Chen, G. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202203307 · Cited by 830
Anionic redox processes for electrochemical devices
Grimaud, A., Hong, W. T., Shao-Horn, Y., & Tarascon, J.-M. (2016) · Nature Materials · doi:10.1038/nmat4551 · Cited by 822
Review—Superconcentrated Electrolytes for Lithium Batteries
Yamada, Y., & Yamada, A. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0041514jes · Cited by 821
Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: A review
Liu, B., Jia, Y., Yuan, C., Wang, L., Gao, X., Yin, S., & Xu, J. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.06.036 · Cited by 816
Lithium/Sulfide All‐Solid‐State Batteries using Sulfide Electrolytes
Wu, J., Liu, S., Han, F., Yao, X., & Wang, C. (2021) · Advanced Materials · doi:10.1002/adma.202000751 · Cited by 809
Future generations of cathode materials: an automotive industry perspective
Andre, D., Kim, S.-J., Lamp, P., Lux, S. F., Maglia, F., Paschos, O., & Stiaszny, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00361j · Cited by 806
Chen, R., Qu, W., Guo, X., Li, L., & Wu, F. (2016) · Materials Horizons · doi:10.1039/c6mh00218h · Cited by 797
Fang, G., Zhu, C., Chen, M., Zhou, J., Tang, B., Cao, X., Zheng, X., Pan, A., & Liang, S. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808375 · Cited by 790
Recycling of spent lithium-ion batteries in view of lithium recovery: A critical review
Liu, C., Lin, J., Cao, H., Zhang, Y., & Sun, Z. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.304 · Cited by 789
Layered MgxV2O5·n H2O as Cathode Material for High-Performance Aqueous Zinc Ion Batteries
Ming, F., Liang, H., Lei, Y., Kandambeth, S., Eddaoudi, M., & Alshareef, H. N. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01423 · Cited by 783
Ionic Liquid Crystals: Versatile Materials
Goossens, K., Lava, K., Bielawski, C. W., & Binnemans, K. (2016) · Chemical Reviews · doi:10.1021/cr400334b · Cited by 780
Graphene-based electrodes for electrochemical energy storage
Xu, C., Xu, B., Gu, Y., Xiong, Z., Sun, J., & Zhao, X. S. (2013) · Energy & Environmental Science · doi:10.1039/c3ee23870a · Cited by 779
SnO2‐Based Nanomaterials: Synthesis and Application in Lithium‐Ion Batteries
Chen, J. S., & Lou, X. W. (. (2013) · Small · doi:10.1002/smll.201202601 · Cited by 778
Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode
Bieker, G., Winter, M., & Bieker, P. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05865h · Cited by 777
Recent progress in high-voltage lithium ion batteries
Hu, M., Pang, X., & Zhou, Z. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.024 · Cited by 776
Polyoxometalate water oxidation catalysts and the production of green fuel
Lv, H., Geletii, Y. V., Zhao, C., Vickers, J. W., Zhu, G., Luo, Z., Song, J., Lian, T., Musaev, D. G., & Hill, C. L. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35292c · Cited by 775
Poizot, P., & Dolhem, F. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00731e · Cited by 771
Wu, B., Zhang, G., Yan, M., Xiong, T., He, P., He, L., Xu, X., & Mai, L. (2018) · Small · doi:10.1002/smll.201703850 · Cited by 762
Liu, Y., Zhang, P., Sun, N., Anasori, B., Zhu, Q., Liu, H., Gogotsi, Y., & Xu, B. (2018) · Advanced Materials · doi:10.1002/adma.201707334 · Cited by 759
Protected Lithium‐Metal Anodes in Batteries: From Liquid to Solid
Yang, C., Fu, K., Zhang, Y., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201701169 · Cited by 757
3D Graphene Foams Cross‐linked with Pre‐encapsulated Fe3O4 Nanospheres for Enhanced Lithium Storage
Wei, W., Yang, S., Zhou, H., Lieberwirth, I., Feng, X., & Müllen, K. (2013) · Advanced Materials · doi:10.1002/adma.201300445 · Cited by 754
Meng, Y. S., Srinivasan, V., & Xu, K. (2022) · Science · doi:10.1126/science.abq3750 · Cited by 751
Advanced High‐Voltage Aqueous Lithium‐Ion Battery Enabled by “Water‐in‐Bisalt” Electrolyte
Suo, L., Borodin, O., Sun, W., Fan, X., Yang, C., Wang, F., Gao, T., Ma, Z., Schroeder, M., von Cresce, A., et al. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201602397 · Cited by 746
Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes
Lu, D., Shao, Y., Lozano, T., Bennett, W. D., Graff, G. L., Polzin, B., Zhang, J., Engelhard, M. H., Saenz, N. T., Henderson, W. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400993 · Cited by 740
Insertion-Type Electrodes for Nonaqueous Li-Ion Capacitors
Aravindan, V., Gnanaraj, J., Lee, Y.-S., & Madhavi, S. (2014) · Chemical Reviews · doi:10.1021/cr5000915 · Cited by 726
Xiong, R., Pan, Y., Shen, W., Li, H., & Sun, F. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110048 · Cited by 725
Artificial Interphases for Highly Stable Lithium Metal Anode
Xu, R., Cheng, X.-B., Yan, C., Zhang, X.-Q., Xiao, Y., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2019) · Matter · doi:10.1016/j.matt.2019.05.016 · Cited by 721
Porous electrode materials for lithium-ion batteries–how to prepare them and what makes them special
Vu, A., Qian, Y., & Stein, A. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200320 · Cited by 719
Yang, Y., Zheng, G., Misra, S., Nelson, J., Toney, M. F., & Cui, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3052206 · Cited by 718
Fluorinated Solid-Electrolyte Interphase in High-Voltage Lithium Metal Batteries
Li, T., Zhang, X.-Q., Shi, P., & Zhang, Q. (2019) · Joule · doi:10.1016/j.joule.2019.09.022 · Cited by 714
Reversible Sodium Ion Insertion in Single Crystalline Manganese Oxide Nanowires with Long Cycle Life
Cao, Y., Xiao, L., Wang, W., Choi, D., Nie, Z., Yu, J., Saraf, L. V., Yang, Z., & Liu, J. (2011) · Advanced Materials · doi:10.1002/adma.201100904 · Cited by 708
Interfaces in Solid-State Lithium Batteries
Xu, L., Tang, S., Cheng, Y., Wang, K., Liang, J., Liu, C., Cao, Y.-C., Wei, F., & Mai, L. (2018) · Joule · doi:10.1016/j.joule.2018.07.009 · Cited by 702
Nanowire Electrodes for Electrochemical Energy Storage Devices
Mai, L., Tian, X., Xu, X., Chang, L., & Xu, L. (2014) · Chemical Reviews · doi:10.1021/cr500177a · Cited by 700
Higher, Stronger, Better…︁ A Review of 5 Volt Cathode Materials for Advanced Lithium‐Ion Batteries
Kraytsberg, A., & Ein‐Eli, Y. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200068 · Cited by 698
Liu, J., Zhang, J., Yang, Z., Lemmon, J. P., Imhoff, C., Graff, G. L., Li, L., Hu, J., Wang, C., Xiao, J., et al. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200690 · Cited by 696
High-Performance Anode Materials for Rechargeable Lithium-Ion Batteries
Lu, J., Chen, Z., Pan, F., Cui, Y., & Amine, K. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0001-4 · Cited by 695
Liu, W., Liu, P., & Mitlin, D. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002297 · Cited by 687
Maiyalagan, T., Jarvis, K. A., Therese, S., Ferreira, P. J., & Manthiram, A. (2014) · Nature Communications · doi:10.1038/ncomms4949 · Cited by 686
Nanoengineering of 2D MXene‐Based Materials for Energy Storage Applications
Nan, J., Guo, X., Xiao, J., Li, X., Chen, W., Wu, W., Liu, H., Wang, Y., Wu, M., & Wang, G. (2021) · Small · doi:10.1002/smll.201902085 · Cited by 685
Wang, C., Gong, Y., Liu, B., Fu, K., Yao, Y., Hitz, E., Li, Y., Dai, J., Xu, S., Luo, W., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04695 · Cited by 682
A review of flexible lithium–sulfur and analogous alkali metal–chalcogen rechargeable batteries
Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00139h · Cited by 680
Ionic shield for polysulfides towards highly-stable lithium–sulfur batteries
Huang, J.-Q., Zhang, Q., Peng, H.-J., Liu, X.-Y., Qian, W.-Z., & Wei, F. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42223b · Cited by 679
Radin, M. D., Hy, S., Sina, M., Fang, C., Liu, H., Vinckeviciute, J., Zhang, M., Whittingham, M. S., Meng, Y. S., & Van der Ven, A. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602888 · Cited by 677
Atomic-Scale Recognition of Surface Structure and Intercalation Mechanism of Ti3C2X
Wang, X., Shen, X., Gao, Y., Wang, Z., Yu, R., & Chen, L. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512820k · Cited by 672
Computational understanding of Li-ion batteries
Urban, A., Seo, D.-H., & Ceder, G. (2016) · npj Computational Materials · doi:10.1038/npjcompumats.2016.2 · Cited by 671
Huang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
Elastic Properties of the Solid Electrolyte Li7La3Zr2O12(LLZO)
Yu, S., Schmidt, R. D., Garcia-Mendez, R., Herbert, E., Dudney, N. J., Wolfenstine, J. B., Sakamoto, J., & Siegel, D. J. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03854 · Cited by 662
Electrospun Core–Shell Fibers for Robust Silicon Nanoparticle-Based Lithium Ion Battery Anodes
Hwang, T. H., Lee, Y. M., Kong, B.-S., Seo, J.-S., & Choi, J. W. (2012) · Nano Letters · doi:10.1021/nl203817r · Cited by 658
In situ atomic-scale imaging of electrochemical lithiation in silicon
Liu, X. H., Wang, J. W., Huang, S., Fan, F., Huang, X., Liu, Y., Krylyuk, S., Yoo, J., Dayeh, S. A., Davydov, A. V., et al. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.170 · Cited by 657
Li, W., Zhang, Q., Zheng, G., Seh, Z. W., Yao, H., & Cui, Y. (2013) · Nano Letters · doi:10.1021/nl403130h · Cited by 654
Xu, Q., Li, J., Sun, J., Yin, Y., Wan, L., & Guo, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601481 · Cited by 652
Solar‐to‐Hydrogen Energy Conversion Based on Water Splitting
Qi, J., Zhang, W., & Cao, R. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701620 · Cited by 649
Electrode–electrolyte interfaces in lithium-based batteries
Yu, X., & Manthiram, A. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02555f · Cited by 649
All-solid-state lithium-ion and lithium metal batteries – paving the way to large-scale production
Schnell, J., Günther, T., Knoche, T., Vieider, C., Köhler, L., Just, A., Keller, M., Passerini, S., & Reinhart, G. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.062 · Cited by 646
Two‐Dimensional Materials for Beyond‐Lithium‐Ion Batteries
Peng, L., Zhu, Y., Chen, D., Ruoff, R. S., & Yu, G. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600025 · Cited by 645
Zhao, B., Ran, R., Liu, M., & Shao, Z. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2015.10.001 · Cited by 644
Emerging Era of Electrolyte Solvation Structure and Interfacial Model in Batteries
Cheng, H., Sun, Q., Li, L., Zou, Y., Wang, Y., Cai, T., Zhao, F., Liu, G., Ma, Z., Wahyudi, W., et al. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.1c02425 · Cited by 640
Zhang, J., Zhao, J., Yue, L., Wang, Q., Chai, J., Liu, Z., Zhou, X., Li, H., Guo, Y., Cui, G., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501082 · Cited by 636
Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Wang, L., Chen, B., Ma, J., Cui, G., & Chen, L. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00322j · Cited by 625
High-Energy Cathode Materials (Li2MnO3–LiMO2) for Lithium-Ion Batteries
Yu, H., & Zhou, H. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400032v · Cited by 624
Covalent–Organic Frameworks: Advanced Organic Electrode Materials for Rechargeable Batteries
Sun, T., Xie, J., Guo, W., Li, D., & Zhang, Q. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904199 · Cited by 622
Molecular engineering of organic electroactive materials for redox flow batteries
Ding, Y., Zhang, C., Zhang, L., Zhou, Y., & Yu, G. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00569e · Cited by 619
High‐Performance Aqueous Zinc–Ion Battery Based on Layered H2V3O8 Nanowire Cathode
He, P., Quan, Y., Xu, X., Yan, M., Yang, W., An, Q., He, L., & Mai, L. (2017) · Small · doi:10.1002/smll.201702551 · Cited by 613
2D Materials Beyond Graphene for High‐Performance Energy Storage Applications
Zhang, X., Hou, L., Ciesielski, A., & Samorì, P. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600671 · Cited by 611
Fast Charging Anode Materials for Lithium‐Ion Batteries: Current Status and Perspectives
Li, S., Wang, K., Zhang, G., Li, S., Xu, Y., Zhang, X., Zhang, X., Zheng, S., Sun, X., & Ma, Y. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202200796 · Cited by 607
A durable and safe solid-state lithium battery with a hybrid electrolyte membrane
Zhang, W., Nie, J., Li, F., Wang, Z. L., & Sun, C. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.01.028 · Cited by 606
Critical Review on Low‐Temperature Li‐Ion/Metal Batteries
Zhang, N., Deng, T., Zhang, S., Wang, C., Chen, L., Wang, C., & Fan, X. (2022) · Advanced Materials · doi:10.1002/adma.202107899 · Cited by 604
Yang, L., Wang, S., Mao, J., Deng, J., Gao, Q., Tang, Y., & Schmidt, O. G. (2013) · Advanced Materials · doi:10.1002/adma.201203999 · Cited by 602
Porous carbon nanofiber–sulfur composite electrodes for lithium/sulfur cells
Ji, L., Rao, M., Aloni, S., Wang, L., Cairns, E. J., & Zhang, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02256c · Cited by 602
Metadata
- Authors
- Goodenough, J. B., & Kim, Y.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-08-28
- Volume
- 22
- Issue
- 3
- Pages
- 587-603
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W3023435578
- Cited by
- 10,943
- References
- 59
- FWCI
- 153.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.